Skip to contentSkip to conversation

Introduce Architectural LBR for vPMU

PATCH Applied Yang Weijiang 2 participants 18 messages May 17, 2022 – May 20, 2022

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

v12 cover Introduce Architectural LBR for vPMU

Intel CPU model-specific LBR(Legacy LBR) evolved into Architectural LBR(Arch LBR[0]), it's the replacement of legacy LBR on new platforms. The native support patches were merged into 5.9 kernel tree, and this patch series is to enable Arch LBR in vPMU so that guest can benefit from the merits of the feature.

The main advantages of Arch LBR are [1]:
- Faster context switching due to XSAVES support and faster reset of LBR MSRs via the new DEPTH MSR
- Faster LBR read for a non-PEBS event due to XSAVES support, which lowers the overhead of the NMI handler.
- Linux kernel can support the LBR features without knowing the model number of the current CPU.

From end user's point of view, the usage of Arch LBR is the same as the Legacy LBR that has been merged in the mainline.

Note, in this series, we impose one restriction for guest Arch LBR:
Guest can only set the same LBR record depth as host, this is due to the special behavior of MSR_ARCH_LBR_DEPTH: 1) On write to the MSR, it'll reset all Arch LBR recording MSRs to 0s. 2) XRSTORS resets all record MSRs to 0s if the saved depth mismatches MSR_ARCH_LBR_DEPTH. Enforcing the restriction keeps the KVM enabling patch simple and straightforward.

[0] https://software.intel.com/sites/default/files/managed/c5/15/architecture-instruction-set-extensions-programming-reference.pdf
[1] https://lore.kernel.org/lkml/[email protected]/

Qemu patch:
https://patchwork.ozlabs.org/project/qemu-devel/cover/[email protected]/

Previous version:
v11: https://lore.kernel.org/all/[email protected]/

Changes in v12:
1. Refactor KVM pmu helpers and fixed some commit messages. (Kan)
2. Use SMRAM to save/restore MSR_ARCH_LBR_CTL at SMM entry/exit. (Paolo)
3. Add Kan's reviewed-by in commit messages.
4. Rebased to queue:kvm/kvm.git

Like Xu (6):
perf/x86/intel: Fix the comment about guest LBR support on KVM perf/x86/lbr: Simplify the exposure check for the LBR_INFO registers
KVM: vmx/pmu: Emulate MSR_ARCH_LBR_DEPTH for guest Arch LBR
KVM: vmx/pmu: Emulate MSR_ARCH_LBR_CTL for guest Arch LBR
KVM: x86: Refine the matching and clearing logic for supported_xss
KVM: x86: Add XSAVE Support for Architectural LBR

Sean Christopherson (1):
KVM: x86: Report XSS as an MSR to be saved if there are supported
features

Yang Weijiang (9):
KVM: x86: Refresh CPUID on writes to MSR_IA32_XSS
KVM: x86: Add Arch LBR MSRs to msrs_to_save_all list
KVM: x86/pmu: Refactor code to support guest Arch LBR
KVM: x86/vmx: Check Arch LBR config when return perf capabilities
KVM: nVMX: Add necessary Arch LBR settings for nested VM
KVM: x86/vmx: Clear Arch LBREn bit before inject #DB to guest
KVM: x86/vmx: Flip Arch LBREn bit on guest state change
KVM: x86: Add Arch LBR data MSR access interface
KVM: x86/cpuid: Advertise Arch LBR feature in CPUID

 arch/x86/events/intel/core.c     |   3 +-
 arch/x86/events/intel/lbr.c      |   6 +-
 arch/x86/include/asm/kvm_host.h  |   3 +
 arch/x86/include/asm/msr-index.h |   1 +
 arch/x86/include/asm/vmx.h       |   4 +
 arch/x86/kvm/cpuid.c             |  49 +++++++++-
 arch/x86/kvm/vmx/capabilities.h  |   9 ++
 arch/x86/kvm/vmx/nested.c        |   7 +-
 arch/x86/kvm/vmx/pmu_intel.c     | 159 +++++++++++++++++++++++++++----
 arch/x86/kvm/vmx/vmcs12.c        |   1 +
 arch/x86/kvm/vmx/vmcs12.h        |   3 +-
 arch/x86/kvm/vmx/vmx.c           |  80 +++++++++++++++-
 arch/x86/kvm/x86.c               |  23 ++++-
 13 files changed, 310 insertions(+), 38 deletions(-)

base-commit: a3808d88461270c71d3fece5e51cc486ecdac7d0

Signature · 1 line
2.27.0
#1 lore raw

PATCH v12 1/16 perf/x86/intel: Fix the comment about guest LBR support on KVM

From: Like Xu <[email protected]>

Starting from v5.12, KVM reports guest LBR and extra_regs support when the host has relevant support. Just delete this part of the comment and fix a typo incidentally.

---
 arch/x86/events/intel/core.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
arch/x86/events/intel/core.c +1 -2
index f136be17c1e2..1c70ab856bf4 100644
@@ -6494,8 +6494,7 @@ __init int intel_pmu_init(void)
 					  x86_pmu.intel_ctrl);
 	/*
 	 * Access LBR MSR may cause #GP under certain circumstances.
-	 * E.g. KVM doesn't support LBR MSR
-	 * Check all LBT MSR here.
+	 * Check all LBR MSR here.
 	 * Disable LBR access if any LBR MSRs can not be accessed.
 	 */
 	if (x86_pmu.lbr_tos && !check_msr(x86_pmu.lbr_tos, 0x3UL))
Signature · 1 line
2.27.0
#2 lore raw

PATCH v12 2/16 perf/x86/lbr: Simplify the exposure check for the LBR_INFO registers

In reply to Yang Weijiang

From: Like Xu <[email protected]>

The x86_pmu.lbr_info is 0 unless explicitly initialized, so there's no point checking x86_pmu.intel_cap.lbr_format.

---
 arch/x86/events/intel/lbr.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)
arch/x86/events/intel/lbr.c +1 -3
index fe1742c4ca49..4529ce448b2e 100644
@@ -1874,12 +1874,10 @@ void __init intel_pmu_arch_lbr_init(void)
  */
 int x86_perf_get_lbr(struct x86_pmu_lbr *lbr)
 {
-	int lbr_fmt = x86_pmu.intel_cap.lbr_format;
-
 	lbr->nr = x86_pmu.lbr_nr;
 	lbr->from = x86_pmu.lbr_from;
 	lbr->to = x86_pmu.lbr_to;
-	lbr->info = (lbr_fmt == LBR_FORMAT_INFO) ? x86_pmu.lbr_info : 0;
+	lbr->info = x86_pmu.lbr_info;
 
 	return 0;
 }
Signature · 1 line
2.27.0
#3 lore raw

PATCH v12 3/16 KVM: x86: Report XSS as an MSR to be saved if there are supported features

In reply to Yang Weijiang

From: Sean Christopherson <[email protected]>

Add MSR_IA32_XSS to the list of MSRs reported to userspace if supported_xss is non-zero, i.e. KVM supports at least one XSS based feature.

---
 arch/x86/kvm/x86.c | 5 +++++
 1 file changed, 5 insertions(+)
arch/x86/kvm/x86.c +5 -0
index 04812eaaf61b..6dcfedf10734 100644
@@ -1457,6 +1457,7 @@ static const u32 msrs_to_save_all[] = {
 	MSR_F15H_PERF_CTR0, MSR_F15H_PERF_CTR1, MSR_F15H_PERF_CTR2,
 	MSR_F15H_PERF_CTR3, MSR_F15H_PERF_CTR4, MSR_F15H_PERF_CTR5,
 	MSR_IA32_XFD, MSR_IA32_XFD_ERR,
+	MSR_IA32_XSS,
 };
 
 static u32 msrs_to_save[ARRAY_SIZE(msrs_to_save_all)];
@@ -6734,6 +6735,10 @@ static void kvm_init_msr_list(void)
 			if (!kvm_cpu_cap_has(X86_FEATURE_XFD))
 				continue;
 			break;
+		case MSR_IA32_XSS:
+			if (!supported_xss)
+				continue;
+			break;
 		default:
 			break;
 		}
Signature · 1 line
2.27.0
#4 lore raw

PATCH v12 4/16 KVM: x86: Refresh CPUID on writes to MSR_IA32_XSS

In reply to Yang Weijiang

Updated CPUID.0xD.0x1, which reports the current required storage size of all features enabled via XCR0 | XSS, when the guest's XSS is modified.

Note, KVM does not yet support any XSS based features, i.e. supported_xss is guaranteed to be zero at this time.

---
 arch/x86/kvm/cpuid.c | 16 +++++++++++++---
 arch/x86/kvm/x86.c   |  6 ++++--
 2 files changed, 17 insertions(+), 5 deletions(-)
arch/x86/kvm/cpuid.c +13 -3
index 8c1a3b2430a8..b88609847188 100644
@@ -239,9 +239,19 @@ static void __kvm_update_cpuid_runtime(struct kvm_vcpu *vcpu, struct kvm_cpuid_e
 		best->ebx = xstate_required_size(vcpu->arch.xcr0, false);
 
 	best = cpuid_entry2_find(entries, nent, 0xD, 1);
-	if (best && (cpuid_entry_has(best, X86_FEATURE_XSAVES) ||
-		     cpuid_entry_has(best, X86_FEATURE_XSAVEC)))
-		best->ebx = xstate_required_size(vcpu->arch.xcr0, true);
+	if (best) {
+		if (cpuid_entry_has(best, X86_FEATURE_XSAVES) ||
+		    cpuid_entry_has(best, X86_FEATURE_XSAVEC))  {
+			u64 xstate = vcpu->arch.xcr0 | vcpu->arch.ia32_xss;
+
+			best->ebx = xstate_required_size(xstate, true);
+		}
+
+		if (!cpuid_entry_has(best, X86_FEATURE_XSAVES)) {
+			best->ecx = 0;
+			best->edx = 0;
+		}
+	}
 
 	best = __kvm_find_kvm_cpuid_features(vcpu, entries, nent);
 	if (kvm_hlt_in_guest(vcpu->kvm) && best &&
arch/x86/kvm/x86.c +4 -2
index 6dcfedf10734..247c58f5c8af 100644
@@ -3613,8 +3613,10 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 		 */
 		if (data & ~supported_xss)
 			return 1;
-		vcpu->arch.ia32_xss = data;
-		kvm_update_cpuid_runtime(vcpu);
+		if (vcpu->arch.ia32_xss != data) {
+			vcpu->arch.ia32_xss = data;
+			kvm_update_cpuid_runtime(vcpu);
+		}
 		break;
 	case MSR_SMI_COUNT:
 		if (!msr_info->host_initiated)
Signature · 1 line
2.27.0
#5 lore raw

PATCH v12 5/16 KVM: x86: Add Arch LBR MSRs to msrs_to_save_all list

In reply to Yang Weijiang

Arch LBR MSR_ARCH_LBR_DEPTH and MSR_ARCH_LBR_CTL are queried by userspace application before it wants to {save|restore} the Arch LBR data. Other LBR related data MSRs are omitted here intentionally due to lengthy list(32*3). Userspace can still use KVM_{GET|SET}_MSRS to access them if necessary.

---
 arch/x86/kvm/x86.c | 6 ++++++
 1 file changed, 6 insertions(+)
arch/x86/kvm/x86.c +6 -0
index 247c58f5c8af..93b027aed2f3 100644
@@ -1458,6 +1458,7 @@ static const u32 msrs_to_save_all[] = {
 	MSR_F15H_PERF_CTR3, MSR_F15H_PERF_CTR4, MSR_F15H_PERF_CTR5,
 	MSR_IA32_XFD, MSR_IA32_XFD_ERR,
 	MSR_IA32_XSS,
+	MSR_ARCH_LBR_CTL, MSR_ARCH_LBR_DEPTH,
 };
 
 static u32 msrs_to_save[ARRAY_SIZE(msrs_to_save_all)];
@@ -6741,6 +6742,11 @@ static void kvm_init_msr_list(void)
 			if (!supported_xss)
 				continue;
 			break;
+		case MSR_ARCH_LBR_DEPTH:
+		case MSR_ARCH_LBR_CTL:
+			if (!kvm_cpu_cap_has(X86_FEATURE_ARCH_LBR))
+				continue;
+			break;
 		default:
 			break;
 		}
Signature · 1 line
2.27.0
#6 lore raw

PATCH v12 6/16 KVM: vmx/pmu: Emulate MSR_ARCH_LBR_DEPTH for guest Arch LBR

In reply to Yang Weijiang

From: Like Xu <[email protected]>

The number of Arch LBR entries available is determined by the value in host MSR_ARCH_LBR_DEPTH.DEPTH. The supported LBR depth values are enumerated in CPUID.(EAX=01CH, ECX=0):EAX[7:0]. For each bit "n" set in this field, the MSR_ARCH_LBR_DEPTH.DEPTH value of "8*(n+1)" is supported. In the first generation of Arch LBR, max entry size is 32, host configures the max size and guest always honors the setting.

Write to MSR_ARCH_LBR_DEPTH has side-effect, all LBR entries are reset to 0. Kernel PMU driver can leverage this effect to do fask reset to LBR record MSRs. KVM allows guest to achieve it when Arch LBR records MSRs are passed through to the guest.

---
 arch/x86/include/asm/kvm_host.h |  3 +++
 arch/x86/kvm/vmx/pmu_intel.c    | 48 +++++++++++++++++++++++++++++++++
 2 files changed, 51 insertions(+)
arch/x86/include/asm/kvm_host.h +3 -0
index 9cdc5bbd721f..b6735dcf5a6a 100644
@@ -547,6 +547,9 @@ struct kvm_pmu {
 	 * redundant check before cleanup if guest don't use vPMU at all.
 	 */
 	u8 event_count;
+
+	/* Guest arch lbr depth supported by KVM. */
+	u64 kvm_arch_lbr_depth;
 };
 
 struct kvm_pmu_ops;
arch/x86/kvm/vmx/pmu_intel.c +48 -0

88 lines not on this page · raw message

Signature · 1 line
2.27.0
#7 lore raw

PATCH v12 7/16 KVM: vmx/pmu: Emulate MSR_ARCH_LBR_CTL for guest Arch LBR

In reply to Yang Weijiang

From: Like Xu <[email protected]>

Arch LBR is enabled by setting MSR_ARCH_LBR_CTL.LBREn to 1. A new guest state field named "Guest IA32_LBR_CTL" is added to enhance guest LBR usage. When guest Arch LBR is enabled, a guest LBR event will be created like the model-specific LBR does. Clear guest LBR enable bit on host PMI handling so guest can see expected config.

On processors that support Arch LBR, MSR_IA32_DEBUGCTLMSR[bit 0] has no meaning. It can be written to 0 or 1, but reads will always return 0. Like IA32_DEBUGCTL, IA32_ARCH_LBR_CTL msr is also preserved on INIT.

Regardless of the Arch LBR or legacy LBR, when the LBR_EN bit 0 of the corresponding control MSR is set to 1, LBR recording will be enabled.

---
 arch/x86/events/intel/lbr.c      |  2 --
 arch/x86/include/asm/msr-index.h |  1 +
 arch/x86/include/asm/vmx.h       |  2 ++
 arch/x86/kvm/vmx/pmu_intel.c     | 57 ++++++++++++++++++++++++++++----
 arch/x86/kvm/vmx/vmx.c           | 12 +++++++
 5 files changed, 66 insertions(+), 8 deletions(-)
arch/x86/events/intel/lbr.c +0 -2
index 4529ce448b2e..4fe6c3b50fc3 100644
@@ -160,8 +160,6 @@ enum {
 	 ARCH_LBR_RETURN		|\
 	 ARCH_LBR_OTHER_BRANCH)
 
-#define ARCH_LBR_CTL_MASK			0x7f000e
-
 static void intel_pmu_lbr_filter(struct cpu_hw_events *cpuc);
 
 static __always_inline bool is_lbr_call_stack_bit_set(u64 config)
arch/x86/include/asm/msr-index.h +1 -0
index c89ca8f78462..65e90414c603 100644
@@ -169,6 +169,7 @@
 #define LBR_INFO_BR_TYPE		(0xfull << LBR_INFO_BR_TYPE_OFFSET)
 
 #define MSR_ARCH_LBR_CTL		0x000014ce
+#define ARCH_LBR_CTL_MASK		0x7f000e
 #define ARCH_LBR_CTL_LBREN		BIT(0)
 #define ARCH_LBR_CTL_CPL_OFFSET		1
 #define ARCH_LBR_CTL_CPL		(0x3ull << ARCH_LBR_CTL_CPL_OFFSET)
arch/x86/include/asm/vmx.h +2 -0
index 89d2172787c5..a84d902952ce 100644
@@ -256,6 +256,8 @@ enum vmcs_field {
 	GUEST_BNDCFGS_HIGH              = 0x00002813,
 	GUEST_IA32_RTIT_CTL		= 0x00002814,
 	GUEST_IA32_RTIT_CTL_HIGH	= 0x00002815,
+	GUEST_IA32_LBR_CTL		= 0x00002816,
+	GUEST_IA32_LBR_CTL_HIGH		= 0x00002817,
 	HOST_IA32_PAT			= 0x00002c00,
 	HOST_IA32_PAT_HIGH		= 0x00002c01,
 	HOST_IA32_EFER			= 0x00002c02,
arch/x86/kvm/vmx/pmu_intel.c +51 -6

94 lines not on this page · raw message

arch/x86/kvm/vmx/vmx.c +12 -0
index 8bbcf2071faf..60f00598f3c9 100644
@@ -2025,6 +2025,13 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 						VM_EXIT_SAVE_DEBUG_CONTROLS)
 			get_vmcs12(vcpu)->guest_ia32_debugctl = data;
 
+		/*
+		 * For Arch LBR, IA32_DEBUGCTL[bit 0] has no meaning.
+		 * It can be written to 0 or 1, but reads will always return 0.
+		 */
+		if (guest_cpuid_has(vcpu, X86_FEATURE_ARCH_LBR))
+			data &= ~DEBUGCTLMSR_LBR;
+
 		vmcs_write64(GUEST_IA32_DEBUGCTL, data);
 		if (intel_pmu_lbr_is_enabled(vcpu) && !to_vmx(vcpu)->lbr_desc.event &&
 		    (data & DEBUGCTLMSR_LBR))
@@ -4641,6 +4648,11 @@ static void vmx_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event)
 	kvm_make_request(KVM_REQ_APIC_PAGE_RELOAD, vcpu);
 
 	vpid_sync_context(vmx->vpid);
+
+	if (!init_event) {
+		if (static_cpu_has(X86_FEATURE_ARCH_LBR))
+			vmcs_write64(GUEST_IA32_LBR_CTL, 0);
+	}
 }
 
 static void vmx_enable_irq_window(struct kvm_vcpu *vcpu)
Signature · 1 line
2.27.0
#8 lore raw

PATCH v12 8/16 KVM: x86/pmu: Refactor code to support guest Arch LBR

In reply to Yang Weijiang

Take account of Arch LBR when do sanity checks before program vPMU for guest. Pass through Arch LBR recording MSRs to guest to gain better performance. Note, Arch LBR and Legacy LBR support are mutually exclusive, i.e., they're not both available on one platform.

---
 arch/x86/kvm/vmx/pmu_intel.c | 50 +++++++++++++++++++++++++-----------
 arch/x86/kvm/vmx/vmx.c       |  3 +++
 2 files changed, 38 insertions(+), 15 deletions(-)
arch/x86/kvm/vmx/pmu_intel.c +35 -15
index 0e882e97728e..41a9c7fbad45 100644
@@ -178,25 +178,28 @@ bool intel_pmu_lbr_is_enabled(struct kvm_vcpu *vcpu)
 static bool intel_pmu_is_valid_lbr_msr(struct kvm_vcpu *vcpu, u32 index)
 {
 	struct x86_pmu_lbr *records = vcpu_to_lbr_records(vcpu);
-	bool ret = false;
 
 	if (!intel_pmu_lbr_is_enabled(vcpu))
-		return ret;
+		return false;
 
 	if (index == MSR_ARCH_LBR_DEPTH || index == MSR_ARCH_LBR_CTL) {
-		if (kvm_cpu_cap_has(X86_FEATURE_ARCH_LBR))
-			ret = guest_cpuid_has(vcpu, X86_FEATURE_ARCH_LBR);
-		return ret;
+		return kvm_cpu_cap_has(X86_FEATURE_ARCH_LBR) &&
+		       guest_cpuid_has(vcpu, X86_FEATURE_ARCH_LBR);
 	}
 
-	ret = (index == MSR_LBR_SELECT) || (index == MSR_LBR_TOS) ||
-		(index >= records->from && index < records->from + records->nr) ||
-		(index >= records->to && index < records->to + records->nr);
+	if (!guest_cpuid_has(vcpu, X86_FEATURE_ARCH_LBR) &&
+	    (index == MSR_LBR_SELECT || index == MSR_LBR_TOS))
+		return true;
 
-	if (!ret && records->info)
-		ret = (index >= records->info && index < records->info + records->nr);
+	if ((index >= records->from && index < records->from + records->nr) ||
+	    (index >= records->to && index < records->to + records->nr))
+		return true;
 
-	return ret;
+	if (records->info && index >= records->info &&
+	    index < records->info + records->nr)
+		return true;
+
+	return false;
 }
 
 static bool intel_is_valid_msr(struct kvm_vcpu *vcpu, u32 msr)
@@ -666,10 +669,15 @@ static void intel_pmu_refresh(struct kvm_vcpu *vcpu)
 	nested_vmx_pmu_refresh(vcpu,
 			       intel_is_valid_msr(vcpu, MSR_CORE_PERF_GLOBAL_CTRL));
 
-	if (cpuid_model_is_consistent(vcpu))
+	if (cpuid_model_is_consistent(vcpu)) {
 		x86_perf_get_lbr(&lbr_desc->records);
-	else
+
+		if (kvm_cpu_cap_has(X86_FEATURE_ARCH_LBR) &&
+		    !guest_cpuid_has(vcpu, X86_FEATURE_ARCH_LBR))
+			lbr_desc->records.nr = 0;
+	} else {
 		lbr_desc->records.nr = 0;
+	}
 
 	if (lbr_desc->records.nr)
 		bitmap_set(pmu->all_valid_pmc_idx, INTEL_PMC_IDX_FIXED_VLBR, 1);
@@ -802,6 +810,9 @@ static void vmx_update_intercept_for_lbr_msrs(struct kvm_vcpu *vcpu, bool set)
 			vmx_set_intercept_for_msr(vcpu, lbr->info + i, MSR_TYPE_RW, set);
 	}
 
+	if (guest_cpuid_has(vcpu, X86_FEATURE_ARCH_LBR))
+		return;
+
 	vmx_set_intercept_for_msr(vcpu, MSR_LBR_SELECT, MSR_TYPE_RW, set);
 	vmx_set_intercept_for_msr(vcpu, MSR_LBR_TOS, MSR_TYPE_RW, set);
 }
@@ -842,10 +853,13 @@ void vmx_passthrough_lbr_msrs(struct kvm_vcpu *vcpu)
 {
 	struct kvm_pmu *pmu = vcpu_to_pmu(vcpu);
 	struct lbr_desc *lbr_desc = vcpu_to_lbr_desc(vcpu);
+	bool lbr_enable = guest_cpuid_has(vcpu, X86_FEATURE_ARCH_LBR) ?
+		(vmcs_read64(GUEST_IA32_LBR_CTL) & ARCH_LBR_CTL_LBREN) :
+		(vmcs_read64(GUEST_IA32_DEBUGCTL) & DEBUGCTLMSR_LBR);
 
 	if (!lbr_desc->event) {
 		vmx_disable_lbr_msrs_passthrough(vcpu);
-		if (vmcs_read64(GUEST_IA32_DEBUGCTL) & DEBUGCTLMSR_LBR)
+		if (lbr_enable)
 			goto warn;
 		if (test_bit(INTEL_PMC_IDX_FIXED_VLBR, pmu->pmc_in_use))
 			goto warn;
@@ -862,13 +876,19 @@ void vmx_passthrough_lbr_msrs(struct kvm_vcpu *vcpu)
 	return;
 
 warn:
+	if (kvm_cpu_cap_has(X86_FEATURE_ARCH_LBR))
+		wrmsrl(MSR_ARCH_LBR_DEPTH, lbr_desc->records.nr);
 	pr_warn_ratelimited("kvm: vcpu-%d: fail to passthrough LBR.\n",
 		vcpu->vcpu_id);
 }
 
 static void intel_pmu_cleanup(struct kvm_vcpu *vcpu)
 {
-	if (!(vmcs_read64(GUEST_IA32_DEBUGCTL) & DEBUGCTLMSR_LBR))
+	bool lbr_enable = guest_cpuid_has(vcpu, X86_FEATURE_ARCH_LBR) ?
+		(vmcs_read64(GUEST_IA32_LBR_CTL) & ARCH_LBR_CTL_LBREN) :
+		(vmcs_read64(GUEST_IA32_DEBUGCTL) & DEBUGCTLMSR_LBR);
+
+	if (!lbr_enable)
 		intel_pmu_release_guest_lbr_event(vcpu);
 }
 
arch/x86/kvm/vmx/vmx.c +3 -0
index 60f00598f3c9..fe4bb9b610ae 100644
@@ -576,6 +576,9 @@ static bool is_valid_passthrough_msr(u32 msr)
 	case MSR_LBR_NHM_TO ... MSR_LBR_NHM_TO + 31:
 	case MSR_LBR_CORE_FROM ... MSR_LBR_CORE_FROM + 8:
 	case MSR_LBR_CORE_TO ... MSR_LBR_CORE_TO + 8:
+	case MSR_ARCH_LBR_FROM_0 ... MSR_ARCH_LBR_FROM_0 + 31:
+	case MSR_ARCH_LBR_TO_0 ... MSR_ARCH_LBR_TO_0 + 31:
+	case MSR_ARCH_LBR_INFO_0 ... MSR_ARCH_LBR_INFO_0 + 31:
 		/* LBR MSRs. These are handled in vmx_update_intercept_for_lbr_msrs() */
 		return true;
 	}
Signature · 1 line
2.27.0
#9 lore raw

PATCH v12 9/16 KVM: x86: Refine the matching and clearing logic for supported_xss

In reply to Yang Weijiang

From: Like Xu <[email protected]>

Refine the code path of the existing clearing of supported_xss in this way:
initialize the supported_xss with the filter of KVM_SUPPORTED_XSS mask and update its value in a bit clear manner (rather than bit setting).

---
 arch/x86/kvm/vmx/vmx.c | 5 +++--
 arch/x86/kvm/x86.c     | 6 +++++-
 2 files changed, 8 insertions(+), 3 deletions(-)
arch/x86/kvm/vmx/vmx.c +3 -2
index fe4bb9b610ae..e442b30f1ca3 100644
@@ -7552,9 +7552,10 @@ static __init void vmx_set_cpu_caps(void)
 		kvm_cpu_cap_set(X86_FEATURE_UMIP);
 
 	/* CPUID 0xD.1 */
-	supported_xss = 0;
-	if (!cpu_has_vmx_xsaves())
+	if (!cpu_has_vmx_xsaves()) {
 		kvm_cpu_cap_clear(X86_FEATURE_XSAVES);
+		supported_xss = 0;
+	}
 
 	/* CPUID 0x80000001 and 0x7 (RDPID) */
 	if (!cpu_has_vmx_rdtscp()) {
arch/x86/kvm/x86.c +5 -1
index 93b027aed2f3..90b3129a2fbe 100644
@@ -224,6 +224,8 @@ static struct kvm_user_return_msrs __percpu *user_return_msrs;
 				| XFEATURE_MASK_BNDCSR | XFEATURE_MASK_AVX512 \
 				| XFEATURE_MASK_PKRU | XFEATURE_MASK_XTILE)
 
+#define KVM_SUPPORTED_XSS     0
+
 u64 __read_mostly host_efer;
 EXPORT_SYMBOL_GPL(host_efer);
 
@@ -11702,8 +11704,10 @@ int kvm_arch_hardware_setup(void *opaque)
 
 	rdmsrl_safe(MSR_EFER, &host_efer);
 
-	if (boot_cpu_has(X86_FEATURE_XSAVES))
+	if (boot_cpu_has(X86_FEATURE_XSAVES)) {
 		rdmsrl(MSR_IA32_XSS, host_xss);
+		supported_xss = host_xss & KVM_SUPPORTED_XSS;
+	}
 
 	kvm_init_pmu_capability();
 
Signature · 1 line
2.27.0
#10 lore raw

PATCH v12 10/16 KVM: x86/vmx: Check Arch LBR config when return perf capabilities

In reply to Yang Weijiang

Two new bit fields(VM_EXIT_CLEAR_IA32_LBR_CTL, VM_ENTRY_LOAD_IA32_LBR_CTL) are added to support guest Arch LBR. These two bits should be set in order to make Arch LBR workable in both guest and host.

---
 arch/x86/include/asm/vmx.h      |  2 ++
 arch/x86/kvm/vmx/capabilities.h |  9 +++++++++
 arch/x86/kvm/vmx/vmx.c          | 10 ++++++++--
 3 files changed, 19 insertions(+), 2 deletions(-)
arch/x86/include/asm/vmx.h +2 -0
index a84d902952ce..ba991066f4a9 100644
@@ -101,6 +101,7 @@
 #define VM_EXIT_CLEAR_BNDCFGS                   0x00800000
 #define VM_EXIT_PT_CONCEAL_PIP			0x01000000
 #define VM_EXIT_CLEAR_IA32_RTIT_CTL		0x02000000
+#define VM_EXIT_CLEAR_IA32_LBR_CTL		0x04000000
 
 #define VM_EXIT_ALWAYSON_WITHOUT_TRUE_MSR	0x00036dff
 
@@ -114,6 +115,7 @@
 #define VM_ENTRY_LOAD_BNDCFGS                   0x00010000
 #define VM_ENTRY_PT_CONCEAL_PIP			0x00020000
 #define VM_ENTRY_LOAD_IA32_RTIT_CTL		0x00040000
+#define VM_ENTRY_LOAD_IA32_LBR_CTL		0x00200000
 
 #define VM_ENTRY_ALWAYSON_WITHOUT_TRUE_MSR	0x000011ff
 
arch/x86/kvm/vmx/capabilities.h +9 -0
index f14c4bef97e0..dc2cb8a16e76 100644
@@ -404,6 +404,12 @@ static inline bool vmx_pebs_supported(void)
 	return boot_cpu_has(X86_FEATURE_PEBS) && kvm_pmu_cap.pebs_ept;
 }
 
+static inline bool cpu_has_vmx_arch_lbr(void)
+{
+	return (vmcs_config.vmexit_ctrl & VM_EXIT_CLEAR_IA32_LBR_CTL) &&
+		(vmcs_config.vmentry_ctrl & VM_ENTRY_LOAD_IA32_LBR_CTL);
+}
+
 static inline u64 vmx_get_perf_capabilities(void)
 {
 	u64 perf_cap = PMU_CAP_FW_WRITES;
@@ -420,6 +426,9 @@ static inline u64 vmx_get_perf_capabilities(void)
 			perf_cap &= ~PERF_CAP_PEBS_BASELINE;
 	}
 
+	if (boot_cpu_has(X86_FEATURE_ARCH_LBR) && !cpu_has_vmx_arch_lbr())
+		perf_cap &= ~PMU_CAP_LBR_FMT;
+
 	return perf_cap;
 }
 
arch/x86/kvm/vmx/vmx.c +8 -2
index e442b30f1ca3..7238628acb90 100644
@@ -2564,7 +2564,8 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf,
 	      VM_EXIT_LOAD_IA32_EFER |
 	      VM_EXIT_CLEAR_BNDCFGS |
 	      VM_EXIT_PT_CONCEAL_PIP |
-	      VM_EXIT_CLEAR_IA32_RTIT_CTL;
+	      VM_EXIT_CLEAR_IA32_RTIT_CTL |
+	      VM_EXIT_CLEAR_IA32_LBR_CTL;
 	if (adjust_vmx_controls(min, opt, MSR_IA32_VMX_EXIT_CTLS,
 				&_vmexit_control) < 0)
 		return -EIO;
@@ -2588,7 +2589,8 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf,
 	      VM_ENTRY_LOAD_IA32_EFER |
 	      VM_ENTRY_LOAD_BNDCFGS |
 	      VM_ENTRY_PT_CONCEAL_PIP |
-	      VM_ENTRY_LOAD_IA32_RTIT_CTL;
+	      VM_ENTRY_LOAD_IA32_RTIT_CTL |
+	      VM_ENTRY_LOAD_IA32_LBR_CTL;
 	if (adjust_vmx_controls(min, opt, MSR_IA32_VMX_ENTRY_CTLS,
 				&_vmentry_control) < 0)
 		return -EIO;
@@ -6024,6 +6026,10 @@ void dump_vmcs(struct kvm_vcpu *vcpu)
 	    vmentry_ctl & VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL)
 		pr_err("PerfGlobCtl = 0x%016llx\n",
 		       vmcs_read64(GUEST_IA32_PERF_GLOBAL_CTRL));
+	if (kvm_cpu_cap_has(X86_FEATURE_ARCH_LBR) &&
+	    vmentry_ctl & VM_ENTRY_LOAD_IA32_LBR_CTL)
+		pr_err("ArchLBRCtl = 0x%016llx\n",
+		       vmcs_read64(GUEST_IA32_LBR_CTL));
 	if (vmentry_ctl & VM_ENTRY_LOAD_BNDCFGS)
 		pr_err("BndCfgS = 0x%016llx\n", vmcs_read64(GUEST_BNDCFGS));
 	pr_err("Interruptibility = %08x  ActivityState = %08x\n",
Signature · 1 line
2.27.0
#11 lore raw

PATCH v12 11/16 KVM: x86: Add XSAVE Support for Architectural LBR

In reply to Yang Weijiang

From: Like Xu <[email protected]>

On processors supporting XSAVES and XRSTORS, Architectural LBR XSAVE support is enumerated from CPUID.(EAX=0DH, ECX=1):ECX[bit 15]. The detailed sub-leaf for Arch LBR is enumerated in CPUID.(0DH, 0FH).

XSAVES provides a faster means than RDMSR for guest to read all LBRs. When guest IA32_XSS[bit 15] is set, the Arch LBR state can be saved using XSAVES and restored by XRSTORS with the appropriate RFBM.

---
 arch/x86/kvm/vmx/vmx.c | 4 ++++
 arch/x86/kvm/x86.c     | 2 +-
 2 files changed, 5 insertions(+), 1 deletion(-)
arch/x86/kvm/vmx/vmx.c +4 -0
index 7238628acb90..1b7194b9b6bc 100644
@@ -7546,6 +7546,10 @@ static __init void vmx_set_cpu_caps(void)
 		kvm_cpu_cap_check_and_set(X86_FEATURE_DS);
 		kvm_cpu_cap_check_and_set(X86_FEATURE_DTES64);
 	}
+	if (!cpu_has_vmx_arch_lbr()) {
+		kvm_cpu_cap_clear(X86_FEATURE_ARCH_LBR);
+		supported_xss &= ~XFEATURE_MASK_LBR;
+	}
 
 	if (!enable_sgx) {
 		kvm_cpu_cap_clear(X86_FEATURE_SGX);
arch/x86/kvm/x86.c +1 -1
index 90b3129a2fbe..637ecd19c646 100644
@@ -224,7 +224,7 @@ static struct kvm_user_return_msrs __percpu *user_return_msrs;
 				| XFEATURE_MASK_BNDCSR | XFEATURE_MASK_AVX512 \
 				| XFEATURE_MASK_PKRU | XFEATURE_MASK_XTILE)
 
-#define KVM_SUPPORTED_XSS     0
+#define KVM_SUPPORTED_XSS     XFEATURE_MASK_LBR
 
 u64 __read_mostly host_efer;
 EXPORT_SYMBOL_GPL(host_efer);
Signature · 1 line
2.27.0
#12 lore raw

PATCH v12 12/16 KVM: nVMX: Add necessary Arch LBR settings for nested VM

In reply to Yang Weijiang

Arch LBR is not supported in nested VM now. This patch is to add necessary settings to make it pass host KVM checks before L2 VM is launched and also to avoid some warnings reported from L1.

---
 arch/x86/kvm/vmx/nested.c    | 7 +++++--
 arch/x86/kvm/vmx/pmu_intel.c | 2 ++
 arch/x86/kvm/vmx/vmcs12.c    | 1 +
 arch/x86/kvm/vmx/vmcs12.h    | 3 ++-
 4 files changed, 10 insertions(+), 3 deletions(-)
arch/x86/kvm/vmx/nested.c +5 -2
index a6688663da4d..5028a8bfa4e1 100644
@@ -6580,7 +6580,9 @@ void nested_vmx_setup_ctls_msrs(struct nested_vmx_msrs *msrs, u32 ept_caps)
 		VM_EXIT_HOST_ADDR_SPACE_SIZE |
 #endif
 		VM_EXIT_LOAD_IA32_PAT | VM_EXIT_SAVE_IA32_PAT |
-		VM_EXIT_CLEAR_BNDCFGS | VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL;
+		VM_EXIT_CLEAR_BNDCFGS | VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL |
+		VM_EXIT_CLEAR_IA32_LBR_CTL;
+
 	msrs->exit_ctls_high |=
 		VM_EXIT_ALWAYSON_WITHOUT_TRUE_MSR |
 		VM_EXIT_LOAD_IA32_EFER | VM_EXIT_SAVE_IA32_EFER |
@@ -6600,7 +6602,8 @@ void nested_vmx_setup_ctls_msrs(struct nested_vmx_msrs *msrs, u32 ept_caps)
 		VM_ENTRY_IA32E_MODE |
 #endif
 		VM_ENTRY_LOAD_IA32_PAT | VM_ENTRY_LOAD_BNDCFGS |
-		VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL;
+		VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL | VM_ENTRY_LOAD_IA32_LBR_CTL;
+
 	msrs->entry_ctls_high |=
 		(VM_ENTRY_ALWAYSON_WITHOUT_TRUE_MSR | VM_ENTRY_LOAD_IA32_EFER);
 
arch/x86/kvm/vmx/pmu_intel.c +2 -0
index 41a9c7fbad45..f5499f391a8b 100644
@@ -183,6 +183,8 @@ static bool intel_pmu_is_valid_lbr_msr(struct kvm_vcpu *vcpu, u32 index)
 		return false;
 
 	if (index == MSR_ARCH_LBR_DEPTH || index == MSR_ARCH_LBR_CTL) {
+		if (is_guest_mode(vcpu))
+			return false;
 		return kvm_cpu_cap_has(X86_FEATURE_ARCH_LBR) &&
 		       guest_cpuid_has(vcpu, X86_FEATURE_ARCH_LBR);
 	}
arch/x86/kvm/vmx/vmcs12.c +1 -0
index 2251b60920f8..bcda664e4d26 100644
@@ -65,6 +65,7 @@ const unsigned short vmcs12_field_offsets[] = {
 	FIELD64(HOST_IA32_PAT, host_ia32_pat),
 	FIELD64(HOST_IA32_EFER, host_ia32_efer),
 	FIELD64(HOST_IA32_PERF_GLOBAL_CTRL, host_ia32_perf_global_ctrl),
+	FIELD64(GUEST_IA32_LBR_CTL, guest_lbr_ctl),
 	FIELD(PIN_BASED_VM_EXEC_CONTROL, pin_based_vm_exec_control),
 	FIELD(CPU_BASED_VM_EXEC_CONTROL, cpu_based_vm_exec_control),
 	FIELD(EXCEPTION_BITMAP, exception_bitmap),
arch/x86/kvm/vmx/vmcs12.h +2 -1
index 746129ddd5ae..bf50227fe401 100644
@@ -71,7 +71,7 @@ struct __packed vmcs12 {
 	u64 pml_address;
 	u64 encls_exiting_bitmap;
 	u64 tsc_multiplier;
-	u64 padding64[1]; /* room for future expansion */
+	u64 guest_lbr_ctl;
 	/*
 	 * To allow migration of L1 (complete with its L2 guests) between
 	 * machines of different natural widths (32 or 64 bit), we cannot have
@@ -254,6 +254,7 @@ static inline void vmx_check_vmcs12_offsets(void)
 	CHECK_OFFSET(pml_address, 312);
 	CHECK_OFFSET(encls_exiting_bitmap, 320);
 	CHECK_OFFSET(tsc_multiplier, 328);
+	CHECK_OFFSET(guest_lbr_ctl, 336);
 	CHECK_OFFSET(cr0_guest_host_mask, 344);
 	CHECK_OFFSET(cr4_guest_host_mask, 352);
 	CHECK_OFFSET(cr0_read_shadow, 360);
Signature · 1 line
2.27.0
#13 lore raw

PATCH v12 13/16 KVM: x86/vmx: Clear Arch LBREn bit before inject #DB to guest

In reply to Yang Weijiang

On a debug breakpoint event (#DB), IA32_LBR_CTL.LBREn is cleared. So need to clear the bit manually before inject #DB.

---
 arch/x86/kvm/vmx/vmx.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
arch/x86/kvm/vmx/vmx.c +20 -0
index 1b7194b9b6bc..7dfa961d6829 100644
@@ -1608,6 +1608,20 @@ static void vmx_clear_hlt(struct kvm_vcpu *vcpu)
 		vmcs_write32(GUEST_ACTIVITY_STATE, GUEST_ACTIVITY_ACTIVE);
 }
 
+static void disable_arch_lbr_ctl(struct kvm_vcpu *vcpu)
+{
+	struct lbr_desc *lbr_desc = vcpu_to_lbr_desc(vcpu);
+	struct kvm_pmu *pmu = vcpu_to_pmu(vcpu);
+
+	if (kvm_cpu_cap_has(X86_FEATURE_ARCH_LBR) &&
+	    test_bit(INTEL_PMC_IDX_FIXED_VLBR, pmu->pmc_in_use) &&
+	    lbr_desc->event) {
+		u64 ctl = vmcs_read64(GUEST_IA32_LBR_CTL);
+
+		vmcs_write64(GUEST_IA32_LBR_CTL, ctl & ~ARCH_LBR_CTL_LBREN);
+	}
+}
+
 static void vmx_queue_exception(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
@@ -1643,6 +1657,9 @@ static void vmx_queue_exception(struct kvm_vcpu *vcpu)
 	vmcs_write32(VM_ENTRY_INTR_INFO_FIELD, intr_info);
 
 	vmx_clear_hlt(vcpu);
+
+	if (nr == DB_VECTOR)
+		disable_arch_lbr_ctl(vcpu);
 }
 
 static void vmx_setup_uret_msr(struct vcpu_vmx *vmx, unsigned int msr,
@@ -4733,6 +4750,9 @@ static void vmx_inject_nmi(struct kvm_vcpu *vcpu)
 			INTR_TYPE_NMI_INTR | INTR_INFO_VALID_MASK | NMI_VECTOR);
 
 	vmx_clear_hlt(vcpu);
+
+	if (vcpu->arch.exception.nr == DB_VECTOR)
+		disable_arch_lbr_ctl(vcpu);
 }
 
 bool vmx_get_nmi_mask(struct kvm_vcpu *vcpu)
Signature · 1 line
2.27.0
#14 lore raw

PATCH v12 14/16 KVM: x86/vmx: Flip Arch LBREn bit on guest state change

In reply to Yang Weijiang

Per spec:"IA32_LBR_CTL.LBREn is saved and cleared on #SMI, and restored on RSM. On a warm reset, all LBR MSRs, including IA32_LBR_DEPTH, have their values preserved. However, IA32_LBR_CTL.LBREn is cleared to 0, disabling LBRs." At guest SMM entry, store guest IA32_LBR_CTL in SMRAM and clear LBREn in VMCS, do reverse things at SMM exit. Also clear LBREn at warm reset.

---
 arch/x86/kvm/vmx/vmx.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)
arch/x86/kvm/vmx/vmx.c +26 -0
index 7dfa961d6829..9b2f84998b45 100644
@@ -4674,6 +4674,8 @@ static void vmx_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event)
 	if (!init_event) {
 		if (static_cpu_has(X86_FEATURE_ARCH_LBR))
 			vmcs_write64(GUEST_IA32_LBR_CTL, 0);
+	} else {
+		disable_arch_lbr_ctl(vcpu);
 	}
 }
 
@@ -7796,6 +7798,8 @@ static int vmx_smi_allowed(struct kvm_vcpu *vcpu, bool for_injection)
 
 static int vmx_enter_smm(struct kvm_vcpu *vcpu, char *smstate)
 {
+	struct lbr_desc *lbr_desc = vcpu_to_lbr_desc(vcpu);
+	struct kvm_pmu *pmu = vcpu_to_pmu(vcpu);
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 
 	vmx->nested.smm.guest_mode = is_guest_mode(vcpu);
@@ -7805,11 +7809,22 @@ static int vmx_enter_smm(struct kvm_vcpu *vcpu, char *smstate)
 	vmx->nested.smm.vmxon = vmx->nested.vmxon;
 	vmx->nested.vmxon = false;
 	vmx_clear_hlt(vcpu);
+
+	if (kvm_cpu_cap_has(X86_FEATURE_ARCH_LBR) &&
+	    test_bit(INTEL_PMC_IDX_FIXED_VLBR, pmu->pmc_in_use) &&
+	    lbr_desc->event && guest_cpuid_has(vcpu, X86_FEATURE_LM)) {
+		u64 ctl = vmcs_read64(GUEST_IA32_LBR_CTL);
+
+		put_smstate(u64, smstate, 0x7f10, ctl);
+		vmcs_write64(GUEST_IA32_LBR_CTL, ctl & ~ARCH_LBR_CTL_LBREN);
+	}
+
 	return 0;
 }
 
 static int vmx_leave_smm(struct kvm_vcpu *vcpu, const char *smstate)
 {
+	struct lbr_desc *lbr_desc = vcpu_to_lbr_desc(vcpu);
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 	int ret;
 
@@ -7826,6 +7841,17 @@ static int vmx_leave_smm(struct kvm_vcpu *vcpu, const char *smstate)
 		vmx->nested.nested_run_pending = 1;
 		vmx->nested.smm.guest_mode = false;
 	}
+
+	if (kvm_cpu_cap_has(X86_FEATURE_ARCH_LBR) &&
+	    guest_cpuid_has(vcpu, X86_FEATURE_LM)) {
+		u64 ctl = GET_SMSTATE(u64, smstate, 0x7f10);
+
+		vmcs_write64(GUEST_IA32_LBR_CTL, ctl | ARCH_LBR_CTL_LBREN);
+
+		if (intel_pmu_lbr_is_enabled(vcpu) && !lbr_desc->event)
+			intel_pmu_create_guest_lbr_event(vcpu);
+	}
+
 	return 0;
 }
 
Signature · 1 line
2.27.0
#15 lore raw

PATCH v12 15/16 KVM: x86: Add Arch LBR data MSR access interface

In reply to Yang Weijiang

Arch LBR MSRs are xsave-supported, but they're operated as "independent" xsave feature by PMU code, i.e., during thread/process context switch, the MSRs are saved/restored with perf_event_task_sched_{in|out} instead of generic kernel fpu switch code, i.e.,save_fpregs_to_fpstate() and restore_fpregs_from_fpstate(). When vcpu guest/host fpu state swap happens, Arch LBR MSRs are retained so they can be accessed directly.

---
 arch/x86/kvm/vmx/pmu_intel.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
arch/x86/kvm/vmx/pmu_intel.c +10 -0
index f5499f391a8b..c7466ba2918e 100644
@@ -432,6 +432,11 @@ static int intel_pmu_get_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 	case MSR_ARCH_LBR_CTL:
 		msr_info->data = vmcs_read64(GUEST_IA32_LBR_CTL);
 		return 0;
+	case MSR_ARCH_LBR_FROM_0 ... MSR_ARCH_LBR_FROM_0 + 31:
+	case MSR_ARCH_LBR_TO_0 ... MSR_ARCH_LBR_TO_0 + 31:
+	case MSR_ARCH_LBR_INFO_0 ... MSR_ARCH_LBR_INFO_0 + 31:
+		rdmsrl(msr_info->index, msr_info->data);
+		return 0;
 	default:
 		if ((pmc = get_gp_pmc(pmu, msr, MSR_IA32_PERFCTR0)) ||
 		    (pmc = get_gp_pmc(pmu, msr, MSR_IA32_PMC0))) {
@@ -534,6 +539,11 @@ static int intel_pmu_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 		    (data & ARCH_LBR_CTL_LBREN))
 			intel_pmu_create_guest_lbr_event(vcpu);
 		return 0;
+	case MSR_ARCH_LBR_FROM_0 ... MSR_ARCH_LBR_FROM_0 + 31:
+	case MSR_ARCH_LBR_TO_0 ... MSR_ARCH_LBR_TO_0 + 31:
+	case MSR_ARCH_LBR_INFO_0 ... MSR_ARCH_LBR_INFO_0 + 31:
+		wrmsrl(msr_info->index, msr_info->data);
+		return 0;
 	default:
 		if ((pmc = get_gp_pmc(pmu, msr, MSR_IA32_PERFCTR0)) ||
 		    (pmc = get_gp_pmc(pmu, msr, MSR_IA32_PMC0))) {
Signature · 1 line
2.27.0
#16 lore raw

PATCH v12 16/16 KVM: x86/cpuid: Advertise Arch LBR feature in CPUID

In reply to Yang Weijiang

Add Arch LBR feature bit in CPU cap-mask to expose the feature. Only max LBR depth is supported for guest, and it's consistent with host Arch LBR settings.

---
 arch/x86/kvm/cpuid.c | 33 ++++++++++++++++++++++++++++++++-
 1 file changed, 32 insertions(+), 1 deletion(-)
arch/x86/kvm/cpuid.c +32 -1
index b88609847188..1a2fb9a8c0d5 100644
@@ -102,6 +102,16 @@ static int kvm_check_cpuid(struct kvm_vcpu *vcpu,
 		if (vaddr_bits != 48 && vaddr_bits != 57 && vaddr_bits != 0)
 			return -EINVAL;
 	}
+	best = cpuid_entry2_find(entries, nent, 0x1c, 0);
+	if (best) {
+		unsigned int eax, ebx, ecx, edx;
+
+		/* Reject user-space CPUID if depth is different from host's.*/
+		cpuid_count(0x1c, 0, &eax, &ebx, &ecx, &edx);
+
+		if ((best->eax & 0xff) != BIT(fls(eax & 0xff) - 1))
+			return -EINVAL;
+	}
 
 	/*
 	 * Exposing dynamic xfeatures to the guest requires additional
@@ -598,7 +608,7 @@ void kvm_set_cpu_caps(void)
 		F(SPEC_CTRL_SSBD) | F(ARCH_CAPABILITIES) | F(INTEL_STIBP) |
 		F(MD_CLEAR) | F(AVX512_VP2INTERSECT) | F(FSRM) |
 		F(SERIALIZE) | F(TSXLDTRK) | F(AVX512_FP16) |
-		F(AMX_TILE) | F(AMX_INT8) | F(AMX_BF16)
+		F(AMX_TILE) | F(AMX_INT8) | F(AMX_BF16) | F(ARCH_LBR)
 	);
 
 	/* TSC_ADJUST and ARCH_CAPABILITIES are emulated in software. */
@@ -1038,6 +1048,27 @@ static inline int __do_cpuid_func(struct kvm_cpuid_array *array, u32 function)
 				goto out;
 		}
 		break;
+	/* Architectural LBR */
+	case 0x1c: {
+		u32 lbr_depth_mask = entry->eax & 0xff;
+
+		if (!lbr_depth_mask ||
+		    !kvm_cpu_cap_has(X86_FEATURE_ARCH_LBR)) {
+			entry->eax = entry->ebx = entry->ecx = entry->edx = 0;
+			break;
+		}
+		/*
+		 * KVM only exposes the maximum supported depth, which is the
+		 * fixed value used on the host side.
+		 * KVM doesn't allow VMM userspace to adjust LBR depth because
+		 * guest LBR emulation depends on the configuration of host LBR
+		 * driver.
+		 */
+		lbr_depth_mask = BIT((fls(lbr_depth_mask) - 1));
+		entry->eax &= ~0xff;
+		entry->eax |= lbr_depth_mask;
+		break;
+	}
 	/* Intel AMX TILE */
 	case 0x1d:
 		if (!kvm_cpu_cap_has(X86_FEATURE_AMX_TILE)) {
Signature · 1 line
2.27.0