hw/sd: Rework models for eMMC support
v2 cover hw/sd: Rework models for eMMC support
From: Philippe Mathieu-Daudé <[email protected]>
Rebase/respin of Cédric RFC:
https://lore.kernel.org/qemu-devel/[email protected]/
(sorry it took me so long guys...)
Pushed at https://gitlab.com/philmd/qemu/-/commits/emmc-v2
I plan to queue patches 1-12 via sdmmc-next later this week.
Cédric, if you are happy with this series, it should be easy to rebase your other patches on top and address the comments I left on the RFC :)
Regards,
Phil.
Cédric Le Goater (6):
hw/sd: Add sd_emmc_cmd_SEND_OP_CMD() handler hw/sd: Add sd_emmc_cmd_ALL_SEND_CID() handler hw/sd: Add sd_emmc_cmd_SEND_RELATIVE_ADDR() handler hw/sd: Add sd_emmc_cmd_APP_CMD() handler hw/sd: add sd_emmc_cmd_SEND_TUNING_BLOCK() handler hw/sd: Add sd_emmc_cmd_SEND_EXT_CSD() handler
Joel Stanley (4):
hw/sd: Add sd_cmd_SEND_TUNING_BLOCK() handler
hw/sd: Support boot area in emmc image
hw/sd: Subtract bootarea size from blk
hw/sd: Add boot config support
Philippe Mathieu-Daudé (13):
hw/sd/sdcard: Return ILLEGAL for CMD19/CMD23 prior SD spec v3.01 hw/sd: When card is in wrong state, log which state it is hw/sd: When card is in wrong state, log which spec version is used hw/sd: Move proto_name to SDProto structure
hw/sd: Introduce sd_cmd_handler type
hw/sd: Add sd_cmd_illegal() handler
hw/sd: Add sd_cmd_unimplemented() handler
hw/sd: Add sd_cmd_GO_IDLE_STATE() handler
hw/sd: Add sd_cmd_SEND_OP_CMD() handler
hw/sd: Add sd_cmd_ALL_SEND_CID() handler
hw/sd: Add sd_cmd_SEND_RELATIVE_ADDR() handler
hw/sd: Add sd_cmd_SET_BLOCK_COUNT() handler
hw/sd: Basis for eMMC support
Sai Pavan Boddu (2):
hw/sd: Add CMD21 tuning sequence
hw/sd: Add mmc switch function support
hw/sd/sd.c | 645 +++++++++++++++++++++++++++++++++-------- hw/sd/sdmmc-internal.c | 2 +- hw/sd/sdmmc-internal.h | 97 +++++++ include/hw/sd/sd.h | 7 + 4 files changed, 627 insertions(+), 124 deletions(-)
Signature · 1 line
2.36.1
PATCH v2 1/25 hw/sd/sdcard: Return ILLEGAL for CMD19/CMD23 prior SD spec v3.01
From: Philippe Mathieu-Daudé <[email protected]>
CMD19 (SEND_TUNING_BLOCK) and CMD23 (SET_BLOCK_COUNT) were added in the Physical Layer Simplified Specification v3.01. When earlier spec version is requested, we should return ILLEGAL.
Message-Id: <[email protected]>
--- hw/sd/sd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
hw/sd/sd.c +2 -2
@@ -1263,7 +1263,7 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req)case 19 :/* CMD19: SEND_TUNING_BLOCK (SD) */ if (sd->spec_version < SD_PHY_SPECv3_01_VERS) { -break ; + goto bad_cmd; }if (sd->state == sd_transfer_state) { sd->state = sd_sendingdata_state;
@@ -1274,7 +1274,7 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req)case 23 :/* CMD23: SET_BLOCK_COUNT */ if (sd->spec_version < SD_PHY_SPECv3_01_VERS) { -break ; + goto bad_cmd; }switch (sd->state) {case sd_transfer_state:
Signature · 1 line
2.36.1
PATCH v2 2/25 hw/sd: When card is in wrong state, log which state it is
In reply to Philippe Mathieu-DaudéFrom: Philippe Mathieu-Daudé <[email protected]>
We report the card is in an inconsistent state, but don't precise in which state it is. Add this information, as it is useful when debugging problems.
Since we will reuse this code, extract as sd_invalid_state_for_cmd() helper.
Message-Id: <[email protected]>
--- hw/sd/sd.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)
hw/sd/sd.c +9 -3
@@ -966,6 +966,14 @@ static bool address_in_range(SDState *sd, const char *desc,return true; } +static sd_rsp_type_t sd_invalid_state_for_cmd (SDState *sd,SDRequest req) +{ +qemu_log_mask (LOG_GUEST_ERROR ,"SD: CMD%i in a wrong state: %s\n" , + req.cmd,sd_state_name (sd->state)); + +return sd_illegal; +} +static sd_rsp_type_t sd_normal_command (SDState *sd,SDRequest req) {uint32_t rca =0x0000 ;
@@ -1534,9 +1542,7 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req)return sd_illegal; } -qemu_log_mask (LOG_GUEST_ERROR ,"SD: CMD%i in a wrong state: %s\n" , - req.cmd,sd_state_name (sd->state)); -return sd_illegal; +return sd_invalid_state_for_cmd (sd, req); } static sd_rsp_type_t sd_app_command(SDState *sd,
Signature · 1 line
2.36.1
PATCH v2 3/25 hw/sd: When card is in wrong state, log which spec version is used
In reply to Philippe Mathieu-DaudéFrom: Philippe Mathieu-Daudé <[email protected]>
Add the sd_version_str() helper.
--- hw/sd/sd.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-)
hw/sd/sd.c +16 -2
@@ -145,6 +145,19 @@ struct SDState {static void sd_realize (DeviceState *dev,Error **errp); +static const char *sd_version_str (enum SDPhySpecificationVersion version) +{ +static const char *sdphy_version[] = { + [SD_PHY_SPECv1_10_VERS] ="v1.10" , + [SD_PHY_SPECv2_00_VERS] ="v2.00" , + [SD_PHY_SPECv3_01_VERS] ="v3.01" , + }; +if (version >=ARRAY_SIZE (sdphy_version)) { +return "unsupported version" ; + } +return sdphy_version[version]; +} +static const char *sd_state_name (enum SDCardStates state) {static const char *state_name[] = {
@@ -968,8 +981,9 @@ static bool address_in_range(SDState *sd, const char *desc,static sd_rsp_type_t sd_invalid_state_for_cmd (SDState *sd,SDRequest req) { -qemu_log_mask (LOG_GUEST_ERROR ,"SD: CMD%i in a wrong state: %s\n" , - req.cmd,sd_state_name (sd->state)); +qemu_log_mask (LOG_GUEST_ERROR ,"SD: CMD%i in a wrong state: %s (spec %s)\n" , + req.cmd,sd_state_name (sd->state), +sd_version_str (sd->spec_version));return sd_illegal; }
Signature · 1 line
2.36.1
Re: [PATCH v2 03/25] hw/sd: When card is in wrong state, log which spec version is used
Quoted 5 lines · Philippe Mathieu-Daudé
From: Philippe Mathieu-Daudé <[email protected]>
Add the
sd_version_str()helper.Signed-off-by Philippe Mathieu-Daudé <[email protected]>
Quoted 40 lines
--- hw/sd/sd.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-)hw/sd/sd.c +16
-2@@ -145,6 +145,19 @@ struct SDState {static void sd_realize (DeviceState *dev,Error **errp); +static const char *sd_version_str (enum SDPhySpecificationVersion version) +{ +static const char *sdphy_version[] = { + [SD_PHY_SPECv1_10_VERS] ="v1.10" , + [SD_PHY_SPECv2_00_VERS] ="v2.00" , + [SD_PHY_SPECv3_01_VERS] ="v3.01" , + }; +if (version >=ARRAY_SIZE (sdphy_version)) { +return "unsupported version" ; + } +return sdphy_version[version]; +} +static const char *sd_state_name (enum SDCardStates state) {static const char *state_name[] = {@@ -968,8 +981,9 @@ static bool address_in_range(SDState *sd, const char *desc,static sd_rsp_type_t sd_invalid_state_for_cmd (SDState *sd,SDRequest req) { -qemu_log_mask (LOG_GUEST_ERROR ,"SD: CMD%i in a wrong state: %s\n" , - req.cmd,sd_state_name (sd->state)); +qemu_log_mask (LOG_GUEST_ERROR ,"SD: CMD%i in a wrong state: %s (spec %s)\n" , + req.cmd,sd_state_name (sd->state), +sd_version_str (sd->spec_version));return sd_illegal; }
PATCH v2 4/25 hw/sd: Move proto_name to SDProto structure
In reply to Philippe Mathieu-DaudéFrom: Philippe Mathieu-Daudé <[email protected]>
Introduce a new structure to hold the bus protocol specific
fields: SDProto. The first field is the protocol name.
Message-Id: <[email protected]>
--- hw/sd/sd.c | 35 +++++++++++++++++++++++++++-------- include/hw/sd/sd.h | 2 ++ 2 files changed, 29 insertions(+), 8 deletions(-)
hw/sd/sd.c +27 -8
@@ -87,6 +87,10 @@ enum SDCardStates { sd_disconnect_state, }; +typedef struct SDProto { +const char *name; +}SDProto ; +struct SDState {DeviceState parent_obj;
@@ -137,7 +141,6 @@ struct SDState {qemu_irq readonly_cb;qemu_irq inserted_cb;QEMUTimer *ocr_power_timer; -const char *proto_name;bool enable;uint8_t dat_lines;bool cmd_line;
@@ -145,6 +148,13 @@ struct SDState {static void sd_realize (DeviceState *dev,Error **errp); +static const struct SDProto *sd_proto (SDState *sd) +{ +SDCardClass *sc =SD_CARD_GET_CLASS (sd); + +return sc->proto; +} +static const char *sd_version_str (enum SDPhySpecificationVersion version) {static const char *sdphy_version[] = {
@@ -981,8 +991,8 @@ static bool address_in_range(SDState *sd, const char *desc,static sd_rsp_type_t sd_invalid_state_for_cmd (SDState *sd,SDRequest req) { -qemu_log_mask (LOG_GUEST_ERROR ,"SD: CMD%i in a wrong state: %s (spec %s)\n" , - req.cmd,sd_state_name (sd->state), +qemu_log_mask (LOG_GUEST_ERROR ,"%s: CMD%i in a wrong state: %s (spec %s)\n" , +sd_proto (sd)->name, req.cmd,sd_state_name (sd->state),sd_version_str (sd->spec_version));return sd_illegal;
@@ -997,7 +1007,7 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req)* However there is no ACMD55, so we want to trace this particular case. */ if (req.cmd !=55 || sd->expecting_acmd) { -trace_sdcard_normal_command (sd->proto_name, +trace_sdcard_normal_command (sd_proto (sd)->name,sd_cmd_name (req.cmd), req.cmd, req.arg,sd_state_name (sd->state)); }
@@ -1562,7 +1572,7 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req)static sd_rsp_type_t sd_app_command (SDState *sd,SDRequest req) { -trace_sdcard_app_command (sd->proto_name,sd_acmd_name (req.cmd), +trace_sdcard_app_command (sd_proto (sd)->name,sd_acmd_name (req.cmd), req.cmd, req.arg,sd_state_name (sd->state)); sd->card_status |=APP_CMD ;switch (req.cmd) {
@@ -1856,7 +1866,7 @@ void sd_write_byte(SDState *sd, uint8_t value)if (sd->card_status & (ADDRESS_ERROR |WP_VIOLATION ))return ; -trace_sdcard_write_data (sd->proto_name, +trace_sdcard_write_data (sd_proto (sd)->name,sd_acmd_name (sd->current_cmd), sd->current_cmd, value);switch (sd->current_cmd) {
@@ -2012,7 +2022,7 @@ uint8_t sd_read_byte(SDState *sd) io_len = (sd->ocr & (1 <<30 )) ?512 : sd->blk_len; -trace_sdcard_read_data (sd->proto_name, +trace_sdcard_read_data (sd_proto (sd)->name,sd_acmd_name (sd->current_cmd), sd->current_cmd, io_len);switch (sd->current_cmd) {
@@ -2131,6 +2141,14 @@ void sd_enable(SDState *sd, bool enable) sd->enable = enable; } +static const SDProto sd_proto_spi = { + .name ="SPI" , +}; + +static const SDProto sd_proto_sd = { + .name ="SD" , +}; +static void sd_instance_init (Object *obj) {SDState *sd =SD_CARD (obj);
@@ -2149,9 +2167,10 @@ static void sd_instance_finalize(Object *obj)static void sd_realize (DeviceState *dev,Error **errp) {SDState *sd =SD_CARD (dev); +SDCardClass *sc =SD_CARD_GET_CLASS (sd);int ret; - sd->proto_name = sd->spi ?"SPI" :"SD" ; + sc->proto = sd->spi ? &sd_proto_spi : &sd_proto_sd;switch (sd->spec_version) { case SD_PHY_SPECv1_10_VERS
include/hw/sd/sd.h +2 -0
@@ -124,6 +124,8 @@ struct SDCardClass {void (*enable)(SDState *sd,bool enable);bool (*get_inserted)(SDState *sd);bool (*get_readonly)(SDState *sd); + +const struct SDProto *proto; };#define TYPE_SD_BUS "sd-bus"
Signature · 1 line
2.36.1
PATCH v2 5/25 hw/sd: Introduce sd_cmd_handler type
In reply to Philippe Mathieu-DaudéFrom: Philippe Mathieu-Daudé <[email protected]>
Add 2 command handler arrays in SDProto, for CMD and ACMD. Have sd_normal_command() / sd_app_command() use these arrays:
if an command handler is registered, call it, otherwise fall back to current code base.
Message-Id: <[email protected]>
--- hw/sd/sd.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)
hw/sd/sd.c +13 -0
@@ -87,8 +87,12 @@ enum SDCardStates { sd_disconnect_state, }; +typedef sd_rsp_type_t (*sd_cmd_handler )(SDState *sd,SDRequest req); +typedef struct SDProto {const char *name; +sd_cmd_handler cmd[SDMMC_CMD_MAX ]; +sd_cmd_handler acmd[SDMMC_CMD_MAX ]; }SDProto ;struct SDState {
@@ -1031,6 +1035,10 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req)return sd_illegal; } +if (sd_proto (sd)->cmd[req.cmd]) { +return sd_proto (sd)->cmd[req.cmd](sd, req); + } +switch (req.cmd) {/* Basic commands (Class 0 and Class 1) */ case 0 :/* CMD0: GO_IDLE_STATE */
@@ -1575,6 +1583,11 @@ static sd_rsp_type_t sd_app_command(SDState *sd,trace_sdcard_app_command (sd_proto (sd)->name,sd_acmd_name (req.cmd), req.cmd, req.arg,sd_state_name (sd->state)); sd->card_status |=APP_CMD ; + +if (sd_proto (sd)->acmd[req.cmd]) { +return sd_proto (sd)->acmd[req.cmd](sd, req); + } +switch (req.cmd) {case 6 :/* ACMD6: SET_BUS_WIDTH */ if (sd->spi) {
Signature · 1 line
2.36.1
PATCH v2 6/25 hw/sd: Add sd_cmd_illegal() handler
In reply to Philippe Mathieu-DaudéFrom: Philippe Mathieu-Daudé <[email protected]>
Log illegal commands as GUEST_ERROR.
Note: we are logging back the SDIO commands (CMD5, CMD52-54).
Message-Id: <[email protected]>
--- hw/sd/sd.c | 62 +++++++++++++++++++++++------------------------------- 1 file changed, 26 insertions(+), 36 deletions(-)
hw/sd/sd.c +26 -36
@@ -1002,6 +1002,15 @@ static sd_rsp_type_t sd_invalid_state_for_cmd(SDState *sd, SDRequest req)return sd_illegal; } +static sd_rsp_type_t sd_cmd_illegal (SDState *sd,SDRequest req) +{ +qemu_log_mask (LOG_GUEST_ERROR ,"%s: Unknown CMD%i for spec %s\n" , +sd_proto (sd)->name, req.cmd, +sd_version_str (sd->spec_version)); + +return sd_illegal; +} +static sd_rsp_type_t sd_normal_command (SDState *sd,SDRequest req) {uint32_t rca =0x0000 ;
@@ -1054,15 +1063,10 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req)break ;case 1 :/* CMD1: SEND_OP_CMD */ -if (!sd->spi) - goto bad_cmd; - sd->state = sd_transfer_state;return sd_r1;case 2 :/* CMD2: ALL_SEND_CID */ -if (sd->spi) - goto bad_cmd;switch (sd->state) {case sd_ready_state: sd->state = sd_identification_state;
@@ -1074,8 +1078,6 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req)break ;case 3 :/* CMD3: SEND_RELATIVE_ADDR */ -if (sd->spi) - goto bad_cmd;switch (sd->state) {case sd_identification_state:case sd_standby_state:
@@ -1089,8 +1091,6 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req)break ;case 4 :/* CMD4: SEND_DSR */ -if (sd->spi) - goto bad_cmd;switch (sd->state) {case sd_standby_state:break ;
@@ -1100,9 +1100,6 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req) }break ; -case 5 :/* CMD5: reserved for SDIO cards */ -return sd_illegal; -case 6 :/* CMD6: SWITCH_FUNCTION */ switch (sd->mode) {case sd_data_transfer_mode:
@@ -1118,8 +1115,6 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req)break ;case 7 :/* CMD7: SELECT/DESELECT_CARD */ -if (sd->spi) - goto bad_cmd;switch (sd->state) {case sd_standby_state:if (sd->rca != rca)
@@ -1249,8 +1244,6 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req)break ;case 15 :/* CMD15: GO_INACTIVE_STATE */ -if (sd->spi) - goto bad_cmd;switch (sd->mode) {case sd_data_transfer_mode:if (sd->rca != rca)
@@ -1303,7 +1296,7 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req)case 19 :/* CMD19: SEND_TUNING_BLOCK (SD) */ if (sd->spec_version < SD_PHY_SPECv3_01_VERS) { - goto bad_cmd; +return sd_invalid_state_for_cmd (sd, req); }if (sd->state == sd_transfer_state) { sd->state = sd_sendingdata_state;
@@ -1314,7 +1307,7 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req)case 23 :/* CMD23: SET_BLOCK_COUNT */ if (sd->spec_version < SD_PHY_SPECv3_01_VERS) { - goto bad_cmd; +return sd_invalid_state_for_cmd (sd, req); }switch (sd->state) {case sd_transfer_state:
@@ -1357,8 +1350,6 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req)break ;case 26 :/* CMD26: PROGRAM_CID */ -if (sd->spi) - goto bad_cmd;switch (sd->state) {case sd_transfer_state: sd->state = sd_receivingdata_state;
@@ -1508,15 +1499,6 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req) }break ; - case 52 ... 54: -/* CMD52, CMD53, CMD54: reserved for SDIO cards -* (see the SDIO Simplified Specification V2.0) -* Handle as illegal command but do not complain -* on stderr, as some OSes may use these in their -* probing for presence of an SDIO card. -*/ -return sd_illegal; -/* Application specific commands (Class 8) */ case 55 :/* CMD55: APP_CMD */ switch (sd->state) {
@@ -1557,19 +1539,12 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req)break ;case 58 :/* CMD58: READ_OCR (SPI) */ -if (!sd->spi) { - goto bad_cmd; - }return sd_r3;case 59 :/* CMD59: CRC_ON_OFF (SPI) */ -if (!sd->spi) { - goto bad_cmd; - }return sd_r1;default : - bad_cmd:qemu_log_mask (LOG_GUEST_ERROR ,"SD: Unknown CMD%i\n" , req.cmd);return sd_illegal; }
@@ -2156,10 +2131,25 @@ void sd_enable(SDState *sd, bool enable)static const SDProto sd_proto_spi = { .name ="SPI" , + .cmd = { + [2 ...4 ] = sd_cmd_illegal, + [5 ] = sd_cmd_illegal, + [7 ] = sd_cmd_illegal, + [15 ] = sd_cmd_illegal, + [26 ] = sd_cmd_illegal, + [52 ...54 ] = sd_cmd_illegal, + }, };static const SDProto sd_proto_sd = { .name ="SD" , + .cmd = { + [1 ] = sd_cmd_illegal, + [5 ] = sd_cmd_illegal, + [52 ...54 ] = sd_cmd_illegal, + [58 ] = sd_cmd_illegal, + [59 ] = sd_cmd_illegal, + }, };static void sd_instance_init (Object *obj)
Signature · 1 line
2.36.1
PATCH v2 7/25 hw/sd: Add sd_cmd_unimplemented() handler
In reply to Philippe Mathieu-DaudéFrom: Philippe Mathieu-Daudé <[email protected]>
Message-Id: <[email protected]>
--- hw/sd/sd.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-)
hw/sd/sd.c +12 -9
@@ -1011,6 +1011,15 @@ static sd_rsp_type_t sd_cmd_illegal(SDState *sd, SDRequest req)return sd_illegal; } +/* Commands that are recognised but not yet implemented. */ +static sd_rsp_type_t sd_cmd_unimplemented (SDState *sd,SDRequest req) +{ +qemu_log_mask (LOG_UNIMP ,"%s: CMD%i not implemented\n" , +sd_proto (sd)->name, req.cmd); + +return sd_illegal; +} +static sd_rsp_type_t sd_normal_command (SDState *sd,SDRequest req) {uint32_t rca =0x0000 ;
@@ -1565,9 +1574,6 @@ static sd_rsp_type_t sd_app_command(SDState *sd,switch (req.cmd) {case 6 :/* ACMD6: SET_BUS_WIDTH */ -if (sd->spi) { - goto unimplemented_spi_cmd; - }switch (sd->state) {case sd_transfer_state: sd->sd_status[0 ] &=0x3f ;
@@ -1698,12 +1704,6 @@ static sd_rsp_type_t sd_app_command(SDState *sd,default :/* Fall back to standard commands. */ return sd_normal_command (sd, req); - - unimplemented_spi_cmd: -/* Commands that are recognised but not yet implemented in SPI mode. */ -qemu_log_mask (LOG_UNIMP ,"SD: CMD%i not implemented in SPI mode\n" , - req.cmd); -return sd_illegal; }qemu_log_mask (LOG_GUEST_ERROR ,"SD: ACMD%i in a wrong state\n" , req.cmd);
@@ -2139,6 +2139,9 @@ static const SDProto sd_proto_spi = { [26] = sd_cmd_illegal, [52 ... 54] = sd_cmd_illegal, }, + .acmd = { + [6] = sd_cmd_unimplemented, + }, };static const SDProto sd_proto_sd = {
Signature · 1 line
2.36.1
PATCH v2 8/25 hw/sd: Add sd_cmd_GO_IDLE_STATE() handler
In reply to Philippe Mathieu-DaudéFrom: Philippe Mathieu-Daudé <[email protected]>
Message-Id: <[email protected]>
--- hw/sd/sd.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-)
hw/sd/sd.c +12 -12
@@ -1020,6 +1020,16 @@ static sd_rsp_type_t sd_cmd_unimplemented(SDState *sd, SDRequest req)return sd_illegal; } +static sd_rsp_type_t sd_cmd_GO_IDLE_STATE (SDState *sd,SDRequest req) +{ +if (sd->state != sd_inactive_state) { + sd->state = sd_idle_state; +sd_reset (DEVICE (sd)); + } + +return sd->spi ? sd_r1 : sd_r0; +} +static sd_rsp_type_t sd_normal_command (SDState *sd,SDRequest req) {uint32_t rca =0x0000 ;
@@ -1059,18 +1069,6 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req)switch (req.cmd) {/* Basic commands (Class 0 and Class 1) */ -case 0 :/* CMD0: GO_IDLE_STATE */ -switch (sd->state) { -case sd_inactive_state: -return sd->spi ? sd_r1 : sd_r0; - -default : - sd->state = sd_idle_state; -sd_reset (DEVICE (sd)); -return sd->spi ? sd_r1 : sd_r0; - } -break ; -case 1 :/* CMD1: SEND_OP_CMD */ sd->state = sd_transfer_state;return sd_r1;
@@ -2132,6 +2130,7 @@ void sd_enable(SDState *sd, bool enable)static const SDProto sd_proto_spi = { .name ="SPI" , .cmd = { + [0 ] = sd_cmd_GO_IDLE_STATE, [2 ...4 ] = sd_cmd_illegal, [5 ] = sd_cmd_illegal, [7 ] = sd_cmd_illegal,
@@ -2147,6 +2146,7 @@ static const SDProto sd_proto_spi = {static const SDProto sd_proto_sd = { .name ="SD" , .cmd = { + [0 ] = sd_cmd_GO_IDLE_STATE, [1 ] = sd_cmd_illegal, [5 ] = sd_cmd_illegal, [52 ...54 ] = sd_cmd_illegal,
Signature · 1 line
2.36.1
PATCH v2 9/25 hw/sd: Add sd_cmd_SEND_OP_CMD() handler
In reply to Philippe Mathieu-DaudéFrom: Philippe Mathieu-Daudé <[email protected]>
Message-Id: <[email protected]>
--- hw/sd/sd.c | 18 +++++++++--------- hw/sd/sdmmc-internal.c | 2 +- 2 files changed, 10 insertions(+), 10 deletions(-)
hw/sd/sd.c +9 -9
@@ -1030,6 +1030,13 @@ static sd_rsp_type_t sd_cmd_GO_IDLE_STATE(SDState *sd, SDRequest req)return sd->spi ? sd_r1 : sd_r0; } +static sd_rsp_type_t sd_cmd_SEND_OP_CMD (SDState *sd,SDRequest req) +{ + sd->state = sd_transfer_state; + +return sd_r1; +} +static sd_rsp_type_t sd_normal_command (SDState *sd,SDRequest req) {uint32_t rca =0x0000 ;
@@ -1069,10 +1076,6 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req)switch (req.cmd) {/* Basic commands (Class 0 and Class 1) */ -case 1 :/* CMD1: SEND_OP_CMD */ - sd->state = sd_transfer_state; -return sd_r1; -case 2 :/* CMD2: ALL_SEND_CID */ switch (sd->state) {case sd_ready_state:
@@ -1622,11 +1625,6 @@ static sd_rsp_type_t sd_app_command(SDState *sd,break ;case 41 :/* ACMD41: SD_APP_OP_COND */ -if (sd->spi) { -/* SEND_OP_CMD */ - sd->state = sd_transfer_state; -return sd_r1; - }if (sd->state != sd_idle_state) {break ; }
@@ -2131,6 +2129,7 @@ static const SDProto sd_proto_spi = { .name = "SPI", .cmd = { [0] = sd_cmd_GO_IDLE_STATE, + [1] = sd_cmd_SEND_OP_CMD, [2 ... 4] = sd_cmd_illegal, [5] = sd_cmd_illegal, [7] = sd_cmd_illegal,
@@ -2140,6 +2139,7 @@ static const SDProto sd_proto_spi = { }, .acmd = { [6] = sd_cmd_unimplemented, + [41] = sd_cmd_SEND_OP_CMD, }, };
hw/sd/sdmmc-internal.c +1 -1
@@ -14,7 +14,7 @@const char *sd_cmd_name (uint8_t cmd) {static const char *cmd_abbrev[SDMMC_CMD_MAX ] = { - [0 ] ="GO_IDLE_STATE" , + [0 ] ="GO_IDLE_STATE" , [1 ] ="SEND_OP_CMD" , [2 ] ="ALL_SEND_CID" , [3 ] ="SEND_RELATIVE_ADDR" , [4 ] ="SET_DSR" , [5 ] ="IO_SEND_OP_COND" , [6 ] ="SWITCH_FUNC" , [7 ] ="SELECT/DESELECT_CARD" ,
Signature · 1 line
2.36.1
PATCH v2 10/25 hw/sd: Add sd_cmd_ALL_SEND_CID() handler
In reply to Philippe Mathieu-DaudéFrom: Philippe Mathieu-Daudé <[email protected]>
Message-Id: <[email protected]>
--- hw/sd/sd.c | 23 ++++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-)
hw/sd/sd.c +12 -11
@@ -1037,6 +1037,17 @@ static sd_rsp_type_t sd_cmd_SEND_OP_CMD(SDState *sd, SDRequest req)return sd_r1; } +static sd_rsp_type_t sd_cmd_ALL_SEND_CID (SDState *sd,SDRequest req) +{ +if (sd->state != sd_ready_state) { +return sd_invalid_state_for_cmd (sd, req); + } + + sd->state = sd_identification_state; + +return sd_r2_i; +} +static sd_rsp_type_t sd_normal_command (SDState *sd,SDRequest req) {uint32_t rca =0x0000 ;
@@ -1076,17 +1087,6 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req)switch (req.cmd) {/* Basic commands (Class 0 and Class 1) */ -case 2 :/* CMD2: ALL_SEND_CID */ -switch (sd->state) { -case sd_ready_state: - sd->state = sd_identification_state; -return sd_r2_i; - -default : -break ; - } -break ; -case 3 :/* CMD3: SEND_RELATIVE_ADDR */ switch (sd->state) {case sd_identification_state:
@@ -2148,6 +2148,7 @@ static const SDProto sd_proto_sd = { .cmd = { [0] = sd_cmd_GO_IDLE_STATE, [1] = sd_cmd_illegal, + [2] = sd_cmd_ALL_SEND_CID, [5] = sd_cmd_illegal, [52 ... 54] = sd_cmd_illegal, [58] = sd_cmd_illegal,
Signature · 1 line
2.36.1
PATCH v2 11/25 hw/sd: Add sd_cmd_SEND_RELATIVE_ADDR() handler
In reply to Philippe Mathieu-DaudéFrom: Philippe Mathieu-Daudé <[email protected]>
Message-Id: <[email protected]>
--- hw/sd/sd.c | 28 +++++++++++++++------------- 1 file changed, 15 insertions(+), 13 deletions(-)
hw/sd/sd.c +15 -13
@@ -1048,6 +1048,20 @@ static sd_rsp_type_t sd_cmd_ALL_SEND_CID(SDState *sd, SDRequest req)return sd_r2_i; } +static sd_rsp_type_t sd_cmd_SEND_RELATIVE_ADDR (SDState *sd,SDRequest req) +{ +switch (sd->state) { +case sd_identification_state: +case sd_standby_state: + sd->state = sd_standby_state; +sd_set_rca (sd); +return sd_r6; + +default : +return sd_invalid_state_for_cmd (sd, req); + } +} +static sd_rsp_type_t sd_normal_command (SDState *sd,SDRequest req) {uint32_t rca =0x0000 ;
@@ -1087,19 +1101,6 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req)switch (req.cmd) {/* Basic commands (Class 0 and Class 1) */ -case 3 :/* CMD3: SEND_RELATIVE_ADDR */ -switch (sd->state) { -case sd_identification_state: -case sd_standby_state: - sd->state = sd_standby_state; -sd_set_rca (sd); -return sd_r6; - -default : -break ; - } -break ; -case 4 :/* CMD4: SEND_DSR */ switch (sd->state) {case sd_standby_state:
@@ -2149,6 +2150,7 @@ static const SDProto sd_proto_sd = { [0] = sd_cmd_GO_IDLE_STATE, [1] = sd_cmd_illegal, [2] = sd_cmd_ALL_SEND_CID, + [3] = sd_cmd_SEND_RELATIVE_ADDR, [5] = sd_cmd_illegal, [52 ... 54] = sd_cmd_illegal, [58] = sd_cmd_illegal,
Signature · 1 line
2.36.1
PATCH v2 12/25 hw/sd: Add sd_cmd_SEND_TUNING_BLOCK() handler
In reply to Philippe Mathieu-DaudéFrom: Joel Stanley <[email protected]>
--- hw/sd/sd.c | 28 +++++++++++++++++----------- 1 file changed, 17 insertions(+), 11 deletions(-)
hw/sd/sd.c +17 -11
@@ -1062,6 +1062,22 @@ static sd_rsp_type_t sd_cmd_SEND_RELATIVE_ADDR(SDState *sd, SDRequest req) } } +static sd_rsp_type_t sd_cmd_SEND_TUNING_BLOCK (SDState *sd,SDRequest req) +{ +if (sd->spec_version < SD_PHY_SPECv3_01_VERS) { +return sd_cmd_illegal (sd, req); + } + +if (sd->state != sd_transfer_state) { +return sd_invalid_state_for_cmd (sd, req); + } + + sd->state = sd_sendingdata_state; + sd->data_offset =0 ; + +return sd_r1; +} +static sd_rsp_type_t sd_normal_command (SDState *sd,SDRequest req) {uint32_t rca =0x0000 ;
@@ -1305,17 +1321,6 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req) }break ; -case 19 :/* CMD19: SEND_TUNING_BLOCK (SD) */ -if (sd->spec_version < SD_PHY_SPECv3_01_VERS) { -return sd_invalid_state_for_cmd (sd, req); - } -if (sd->state == sd_transfer_state) { - sd->state = sd_sendingdata_state; - sd->data_offset =0 ; -return sd_r1; - } -break ; -case 23 :/* CMD23: SET_BLOCK_COUNT */ if (sd->spec_version < SD_PHY_SPECv3_01_VERS) {return sd_invalid_state_for_cmd (sd, req);
@@ -2152,6 +2157,7 @@ static const SDProto sd_proto_sd = { [2] = sd_cmd_ALL_SEND_CID, [3] = sd_cmd_SEND_RELATIVE_ADDR, [5] = sd_cmd_illegal, + [19] = sd_cmd_SEND_TUNING_BLOCK, [52 ... 54] = sd_cmd_illegal, [58] = sd_cmd_illegal, [59] = sd_cmd_illegal,
Signature · 1 line
2.36.1
PATCH v2 13/25 hw/sd: Add sd_cmd_SET_BLOCK_COUNT() handler
In reply to Philippe Mathieu-DaudéFrom: Philippe Mathieu-Daudé <[email protected]>
--- hw/sd/sd.c | 30 ++++++++++++++++-------------- 1 file changed, 16 insertions(+), 14 deletions(-)
hw/sd/sd.c +16 -14
@@ -1078,6 +1078,21 @@ static sd_rsp_type_t sd_cmd_SEND_TUNING_BLOCK(SDState *sd, SDRequest req)return sd_r1; } +static sd_rsp_type_t sd_cmd_SET_BLOCK_COUNT (SDState *sd,SDRequest req) +{ +if (sd->spec_version < SD_PHY_SPECv3_01_VERS) { +return sd_cmd_illegal (sd, req); + } + +if (sd->state != sd_transfer_state) { +return sd_invalid_state_for_cmd (sd, req); + } + + sd->multi_blk_cnt = req.arg; + +return sd_r1; +} +static sd_rsp_type_t sd_normal_command (SDState *sd,SDRequest req) {uint32_t rca =0x0000 ;
@@ -1321,20 +1336,6 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req) }break ; -case 23 :/* CMD23: SET_BLOCK_COUNT */ -if (sd->spec_version < SD_PHY_SPECv3_01_VERS) { -return sd_invalid_state_for_cmd (sd, req); - } -switch (sd->state) { -case sd_transfer_state: - sd->multi_blk_cnt = req.arg; -return sd_r1; - -default : -break ; - } -break ; -/* Block write commands (Class 4) */ case 24 :/* CMD24: WRITE_SINGLE_BLOCK */ case 25 :/* CMD25: WRITE_MULTIPLE_BLOCK */
@@ -2158,6 +2159,7 @@ static const SDProto sd_proto_sd = { [3] = sd_cmd_SEND_RELATIVE_ADDR, [5] = sd_cmd_illegal, [19] = sd_cmd_SEND_TUNING_BLOCK, + [23] = sd_cmd_SET_BLOCK_COUNT, [52 ... 54] = sd_cmd_illegal, [58] = sd_cmd_illegal, [59] = sd_cmd_illegal,
Signature · 1 line
2.36.1
Re: [PATCH v2 13/25] hw/sd: Add sd_cmd_SET_BLOCK_COUNT() handler
Quoted 3 lines · Philippe Mathieu-Daudé
From: Philippe Mathieu-Daudé <[email protected]>
Signed-off-by Philippe Mathieu-Daudé <[email protected]>
Quoted 59 lines
--- hw/sd/sd.c | 30 ++++++++++++++++-------------- 1 file changed, 16 insertions(+), 14 deletions(-)hw/sd/sd.c +16
-14@@ -1078,6 +1078,21 @@ static sd_rsp_type_t sd_cmd_SEND_TUNING_BLOCK(SDState *sd, SDRequest req)return sd_r1; } +static sd_rsp_type_t sd_cmd_SET_BLOCK_COUNT (SDState *sd,SDRequest req) +{ +if (sd->spec_version < SD_PHY_SPECv3_01_VERS) { +return sd_cmd_illegal (sd, req); + } + +if (sd->state != sd_transfer_state) { +return sd_invalid_state_for_cmd (sd, req); + } + + sd->multi_blk_cnt = req.arg; + +return sd_r1; +} +static sd_rsp_type_t sd_normal_command (SDState *sd,SDRequest req) {uint32_t rca =0x0000 ;@@ -1321,20 +1336,6 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req) }break ; -case 23 :/* CMD23: SET_BLOCK_COUNT */ -if (sd->spec_version < SD_PHY_SPECv3_01_VERS) { -return sd_invalid_state_for_cmd (sd, req); - } -switch (sd->state) { -case sd_transfer_state: - sd->multi_blk_cnt = req.arg; -return sd_r1; - -default : -break ; - } -break ; -/* Block write commands (Class 4) */ case 24 :/* CMD24: WRITE_SINGLE_BLOCK */ case 25 :/* CMD25: WRITE_MULTIPLE_BLOCK */ @@ -2158,6 +2159,7 @@ static const SDProto sd_proto_sd = { [3] = sd_cmd_SEND_RELATIVE_ADDR, [5] = sd_cmd_illegal, [19] = sd_cmd_SEND_TUNING_BLOCK, + [23] = sd_cmd_SET_BLOCK_COUNT, [52 ... 54] = sd_cmd_illegal, [58] = sd_cmd_illegal, [59] = sd_cmd_illegal,
PATCH v2 14/25 hw/sd: Basis for eMMC support
In reply to Philippe Mathieu-DaudéFrom: Philippe Mathieu-Daudé <[email protected]>
The initial eMMC support from Vincent Palatin was largely reworked to match the current SD framework.
---
TODO: Do not inherit TYPE_SD_CARD, duplicate sd_class_init()
--- hw/sd/sd.c | 42 ++++++++++++++++++++++++++++++++++++++++++ include/hw/sd/sd.h | 3 +++ 2 files changed, 45 insertions(+)
hw/sd/sd.c +42 -0
@@ -2166,6 +2166,19 @@ static const SDProto sd_proto_sd = { }, }; +static const SDProto sd_proto_emmc = { + .name ="eMMC" , + .cmd = { + [0 ] = sd_cmd_GO_IDLE_STATE, + [5 ] = sd_cmd_illegal, + [19 ] = sd_cmd_SEND_TUNING_BLOCK, + [41 ] = sd_cmd_illegal, + [52 ...54 ] = sd_cmd_illegal, + [58 ] = sd_cmd_illegal, + [59 ] = sd_cmd_illegal, + }, +}; +static void sd_instance_init (Object *obj) {SDState *sd =SD_CARD (obj);
@@ -2284,9 +2297,38 @@ static const TypeInfo sd_info = { .instance_finalize = sd_instance_finalize, }; +static void emmc_realize (DeviceState *dev,Error **errp) +{ +SDState *sd =SD_CARD (dev); + +if (sd->spec_version < SD_PHY_SPECv3_01_VERS) { +error_setg (errp,"Minimum spec for eMMC is v3.01" ); +return ; + } + +sd_realize (dev, errp); +} + +static void emmc_class_init (ObjectClass *klass,void *data) +{ +DeviceClass *dc =DEVICE_CLASS (klass); +SDCardClass *sc =SD_CARD_CLASS (klass); + + dc->desc ="eMMC" ; + dc->realize = emmc_realize; + sc->proto = &sd_proto_emmc; +} + +static const TypeInfo emmc_info = { + .name =TYPE_EMMC , + .parent =TYPE_SD_CARD , + .class_init = emmc_class_init, + }; +static void sd_register_types (void ) {type_register_static (&sd_info); +type_register_static (&emmc_info); }type_init (sd_register_types)
include/hw/sd/sd.h +3 -0
@@ -93,6 +93,9 @@ typedef struct {#define TYPE_SD_CARD "sd-card" OBJECT_DECLARE_TYPE(SDState, SDCardClass, SD_CARD) +#define TYPE_EMMC "emmc" +DECLARE_INSTANCE_CHECKER(SDState, EMMC, TYPE_EMMC) +struct SDCardClass {/*< private >*/ DeviceClass parent_class;
Signature · 1 line
2.36.1
Re: [PATCH v2 14/25] hw/sd: Basis for eMMC support
Quoted 1 line · Philippe Mathieu-Daudé
From: Philippe Mathieu-Daudé <[email protected]>
I missed something during the cherry-pick, this should be:
From: Cédric Le Goater <[email protected]>
Quoted 89 lines
The initial eMMC support from Vincent Palatin was largely reworked to match the current SD framework.
Signed-off-by Cédric Le Goater <[email protected]>Signed-off-by Philippe Mathieu-Daudé <[email protected]>---
TODO: Do not inheritTYPE_SD_CARD, duplicatesd_class_init()--- hw/sd/sd.c | 42 ++++++++++++++++++++++++++++++++++++++++++ include/hw/sd/sd.h | 3 +++ 2 files changed, 45 insertions(+)hw/sd/sd.c +42
-0@@ -2166,6 +2166,19 @@ static const SDProto sd_proto_sd = { }, }; +static const SDProto sd_proto_emmc = { + .name ="eMMC" , + .cmd = { + [0 ] = sd_cmd_GO_IDLE_STATE, + [5 ] = sd_cmd_illegal, + [19 ] = sd_cmd_SEND_TUNING_BLOCK, + [41 ] = sd_cmd_illegal, + [52 ...54 ] = sd_cmd_illegal, + [58 ] = sd_cmd_illegal, + [59 ] = sd_cmd_illegal, + }, +}; +static void sd_instance_init (Object *obj) {SDState *sd =SD_CARD (obj);@@ -2284,9 +2297,38 @@ static const TypeInfo sd_info = { .instance_finalize = sd_instance_finalize, }; +static void emmc_realize (DeviceState *dev,Error **errp) +{ +SDState *sd =SD_CARD (dev); + +if (sd->spec_version < SD_PHY_SPECv3_01_VERS) { +error_setg (errp,"Minimum spec for eMMC is v3.01" ); +return ; + } + +sd_realize (dev, errp); +} + +static void emmc_class_init (ObjectClass *klass,void *data) +{ +DeviceClass *dc =DEVICE_CLASS (klass); +SDCardClass *sc =SD_CARD_CLASS (klass); + + dc->desc ="eMMC" ; + dc->realize = emmc_realize; + sc->proto = &sd_proto_emmc; +} + +static const TypeInfo emmc_info = { + .name =TYPE_EMMC , + .parent =TYPE_SD_CARD , + .class_init = emmc_class_init, + }; +static void sd_register_types (void ) {type_register_static (&sd_info); +type_register_static (&emmc_info); }type_init (sd_register_types)include/hw/sd/sd.h +3
-0@@ -93,6 +93,9 @@ typedef struct {#define TYPE_SD_CARD "sd-card" OBJECT_DECLARE_TYPE(SDState, SDCardClass, SD_CARD) +#define TYPE_EMMC "emmc" +DECLARE_INSTANCE_CHECKER(SDState, EMMC, TYPE_EMMC) +struct SDCardClass {/*< private >*/ DeviceClass parent_class;
Re: [PATCH v2 14/25] hw/sd: Basis for eMMC support
In reply to Philippe Mathieu-DaudéQuoted 42 lines · Philippe Mathieu-Daudé
From: Philippe Mathieu-Daudé <[email protected]>
The initial eMMC support from Vincent Palatin was largely reworked to match the current SD framework.
Signed-off-by Cédric Le Goater <[email protected]>Signed-off-by Philippe Mathieu-Daudé <[email protected]>---
TODO: Do not inheritTYPE_SD_CARD, duplicatesd_class_init()--- hw/sd/sd.c | 42 ++++++++++++++++++++++++++++++++++++++++++ include/hw/sd/sd.h | 3 +++ 2 files changed, 45 insertions(+)hw/sd/sd.c +13
-0@@ -2166,6 +2166,19 @@ static const SDProto sd_proto_sd = { }, }; +static const SDProto sd_proto_emmc = { + .name ="eMMC" , + .cmd = { + [0 ] = sd_cmd_GO_IDLE_STATE, + [5 ] = sd_cmd_illegal, + [19 ] = sd_cmd_SEND_TUNING_BLOCK, + [41 ] = sd_cmd_illegal, + [52 ...54 ] = sd_cmd_illegal, + [58 ] = sd_cmd_illegal, + [59 ] = sd_cmd_illegal, + }, +}; +static void sd_instance_init (Object *obj) {SDState *sd =SD_CARD (obj);@@ -2284,9 +2297,38 @@ static const TypeInfo sd_info = { .instance_finalize = sd_instance_finalize, };
hw/sd/sd.c static const TypeInfo sd_info = { · line 2309
Quoted 10 lines
hw/sd/sd.c +10
-0+static void emmc_realize (DeviceState *dev,Error **errp) +{ +SDState *sd =SD_CARD (dev); + +if (sd->spec_version < SD_PHY_SPECv3_01_VERS) { +error_setg (errp,"Minimum spec for eMMC is v3.01" ); +return ; + } + +sd_realize (dev, errp);
sd_realize overwrites sc->proto. We should not write to the class anyway.
C.
Quoted 39 lines
hw/sd/sd.c +19
-0+} + +static void emmc_class_init (ObjectClass *klass,void *data) +{ +DeviceClass *dc =DEVICE_CLASS (klass); +SDCardClass *sc =SD_CARD_CLASS (klass); + + dc->desc ="eMMC" ; + dc->realize = emmc_realize; + sc->proto = &sd_proto_emmc; +} + +static const TypeInfo emmc_info = { + .name =TYPE_EMMC , + .parent =TYPE_SD_CARD , + .class_init = emmc_class_init, + }; +static void sd_register_types (void ) {type_register_static (&sd_info); +type_register_static (&emmc_info); }type_init (sd_register_types)include/hw/sd/sd.h +3
-0@@ -93,6 +93,9 @@ typedef struct {#define TYPE_SD_CARD "sd-card" OBJECT_DECLARE_TYPE(SDState, SDCardClass, SD_CARD) +#define TYPE_EMMC "emmc" +DECLARE_INSTANCE_CHECKER(SDState, EMMC, TYPE_EMMC) +struct SDCardClass {/*< private >*/ DeviceClass parent_class;
Re: [PATCH v2 14/25] hw/sd: Basis for eMMC support
In reply to Philippe Mathieu-DaudéQuoted 19 lines · Philippe Mathieu-Daudé
From: Philippe Mathieu-Daudé <[email protected]>
The initial eMMC support from Vincent Palatin was largely reworked to match the current SD framework.
Signed-off-by Cédric Le Goater <[email protected]>Signed-off-by Philippe Mathieu-Daudé <[email protected]>---
TODO: Do not inheritTYPE_SD_CARD, duplicatesd_class_init()--- hw/sd/sd.c | 42 ++++++++++++++++++++++++++++++++++++++++++ include/hw/sd/sd.h | 3 +++ 2 files changed, 45 insertions(+)hw/sd/sd.c +0
-0
hw/sd/sd.c static const SDProto sd_proto_sd = { · line 2173
Quoted 8 lines
hw/sd/sd.c +5
-0@@ -2166,6 +2166,19 @@ static const SDProto sd_proto_sd = { }, }; +static const SDProto sd_proto_emmc = { + .name ="eMMC" , + .cmd = { + [0 ] = sd_cmd_GO_IDLE_STATE, + [5 ] = sd_cmd_illegal,
And this needed an extra :
+ [23] = sd_cmd_SET_BLOCK_COUNT,
Thanks,
C.
Quoted 64 lines
hw/sd/sd.c +37
-0+ [19] = sd_cmd_SEND_TUNING_BLOCK, + [41] = sd_cmd_illegal, + [52 ... 54] = sd_cmd_illegal, + [58] = sd_cmd_illegal, + [59] = sd_cmd_illegal, + }, +}; +static void sd_instance_init (Object *obj) {SDState *sd =SD_CARD (obj);@@ -2284,9 +2297,38 @@ static const TypeInfo sd_info = { .instance_finalize = sd_instance_finalize, }; +static void emmc_realize (DeviceState *dev,Error **errp) +{ +SDState *sd =SD_CARD (dev); + +if (sd->spec_version < SD_PHY_SPECv3_01_VERS) { +error_setg (errp,"Minimum spec for eMMC is v3.01" ); +return ; + } + +sd_realize (dev, errp); +} + +static void emmc_class_init (ObjectClass *klass,void *data) +{ +DeviceClass *dc =DEVICE_CLASS (klass); +SDCardClass *sc =SD_CARD_CLASS (klass); + + dc->desc ="eMMC" ; + dc->realize = emmc_realize; + sc->proto = &sd_proto_emmc; +} + +static const TypeInfo emmc_info = { + .name =TYPE_EMMC , + .parent =TYPE_SD_CARD , + .class_init = emmc_class_init, + }; +static void sd_register_types (void ) {type_register_static (&sd_info); +type_register_static (&emmc_info); }type_init (sd_register_types)include/hw/sd/sd.h +3
-0@@ -93,6 +93,9 @@ typedef struct {#define TYPE_SD_CARD "sd-card" OBJECT_DECLARE_TYPE(SDState, SDCardClass, SD_CARD) +#define TYPE_EMMC "emmc" +DECLARE_INSTANCE_CHECKER(SDState, EMMC, TYPE_EMMC) +struct SDCardClass {/*< private >*/ DeviceClass parent_class;
PATCH v2 15/25 hw/sd: Add sd_emmc_cmd_SEND_OP_CMD() handler
In reply to Philippe Mathieu-DaudéFrom: Cédric Le Goater <[email protected]>
--- hw/sd/sd.c | 7 +++++++ 1 file changed, 7 insertions(+)
hw/sd/sd.c +7 -0
@@ -2166,10 +2166,17 @@ static const SDProto sd_proto_sd = { }, }; +static sd_rsp_type_t sd_emmc_cmd_SEND_OP_CMD (SDState *sd,SDRequest req) +{ + sd->state = sd_ready_state; +return sd_r3; +} +static const SDProto sd_proto_emmc = { .name ="eMMC" , .cmd = { [0 ] = sd_cmd_GO_IDLE_STATE, + [1 ] = sd_emmc_cmd_SEND_OP_CMD, [5 ] = sd_cmd_illegal, [19 ] = sd_cmd_SEND_TUNING_BLOCK, [41 ] = sd_cmd_illegal,
Signature · 1 line
2.36.1
PATCH v2 16/25 hw/sd: Add sd_emmc_cmd_ALL_SEND_CID() handler
In reply to Philippe Mathieu-DaudéFrom: Cédric Le Goater <[email protected]>
--- hw/sd/sd.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)
hw/sd/sd.c +12 -0
@@ -2172,11 +2172,23 @@ static sd_rsp_type_t sd_emmc_cmd_SEND_OP_CMD(SDState *sd, SDRequest req)return sd_r3; } +static sd_rsp_type_t sd_emmc_cmd_ALL_SEND_CID (SDState *sd,SDRequest req) +{ +if (sd->state != sd_ready_state && sd->state != sd_idle_state) { +return sd_invalid_state_for_cmd (sd, req); + } + + sd->state = sd_identification_state; + +return sd_r2_i; +} +static const SDProto sd_proto_emmc = { .name ="eMMC" , .cmd = { [0 ] = sd_cmd_GO_IDLE_STATE, [1 ] = sd_emmc_cmd_SEND_OP_CMD, + [2 ] = sd_emmc_cmd_ALL_SEND_CID, [5 ] = sd_cmd_illegal, [19 ] = sd_cmd_SEND_TUNING_BLOCK, [41 ] = sd_cmd_illegal,
Signature · 1 line
2.36.1
PATCH v2 17/25 hw/sd: Add sd_emmc_cmd_SEND_RELATIVE_ADDR() handler
In reply to Philippe Mathieu-DaudéFrom: Cédric Le Goater <[email protected]>
--- hw/sd/sd.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)
hw/sd/sd.c +20 -0
@@ -1048,6 +1048,25 @@ static sd_rsp_type_t sd_cmd_ALL_SEND_CID(SDState *sd, SDRequest req)return sd_r2_i; } +static void sd_emmc_set_rca (SDState *sd,uint16_t value) +{ + sd->rca = value; +} + +static sd_rsp_type_t sd_emmc_cmd_SEND_RELATIVE_ADDR (SDState *sd,SDRequest req) +{ +switch (sd->state) { +case sd_identification_state: +case sd_standby_state: + sd->state = sd_standby_state; +sd_emmc_set_rca (sd, req.arg >>16 ); +return sd_r1; + +default : +return sd_invalid_state_for_cmd (sd, req); + } +} +static sd_rsp_type_t sd_cmd_SEND_RELATIVE_ADDR (SDState *sd,SDRequest req) {switch (sd->state) {
@@ -2189,6 +2208,7 @@ static const SDProto sd_proto_emmc = { [0] = sd_cmd_GO_IDLE_STATE, [1] = sd_emmc_cmd_SEND_OP_CMD, [2] = sd_emmc_cmd_ALL_SEND_CID, + [3] = sd_emmc_cmd_SEND_RELATIVE_ADDR, [5] = sd_cmd_illegal, [19] = sd_cmd_SEND_TUNING_BLOCK, [41] = sd_cmd_illegal,
Signature · 1 line
2.36.1
PATCH v2 18/25 hw/sd: Add sd_emmc_cmd_APP_CMD() handler
In reply to Philippe Mathieu-DaudéFrom: Cédric Le Goater <[email protected]>
--- hw/sd/sd.c | 6 ++++++ 1 file changed, 6 insertions(+)
hw/sd/sd.c +6 -0
@@ -2202,6 +2202,11 @@ static sd_rsp_type_t sd_emmc_cmd_ALL_SEND_CID(SDState *sd, SDRequest req)return sd_r2_i; } +static sd_rsp_type_t sd_emmc_cmd_APP_CMD (SDState *sd,SDRequest req) +{ +return sd_r0; +} +static const SDProto sd_proto_emmc = { .name ="eMMC" , .cmd = {
@@ -2213,6 +2218,7 @@ static const SDProto sd_proto_emmc = { [19] = sd_cmd_SEND_TUNING_BLOCK, [41] = sd_cmd_illegal, [52 ... 54] = sd_cmd_illegal, + [55] = sd_emmc_cmd_APP_CMD, [58] = sd_cmd_illegal, [59] = sd_cmd_illegal, },
Signature · 1 line
2.36.1
PATCH v2 19/25 hw/sd: add sd_emmc_cmd_SEND_TUNING_BLOCK() handler
In reply to Philippe Mathieu-DaudéFrom: Cédric Le Goater <[email protected]>
--- hw/sd/sd.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)
hw/sd/sd.c +12 -0
@@ -2207,6 +2207,17 @@ static sd_rsp_type_t sd_emmc_cmd_APP_CMD(SDState *sd, SDRequest req)return sd_r0; } +static sd_rsp_type_t sd_emmc_cmd_SEND_TUNING_BLOCK (SDState *sd,SDRequest req) +{ +if (sd->state != sd_transfer_state) { +sd_invalid_state_for_cmd (sd, req); + } + + sd->state = sd_sendingdata_state; + sd->data_offset =0 ; +return sd_r1; +} +static const SDProto sd_proto_emmc = { .name ="eMMC" , .cmd = {
@@ -2216,6 +2227,7 @@ static const SDProto sd_proto_emmc = { [3] = sd_emmc_cmd_SEND_RELATIVE_ADDR, [5] = sd_cmd_illegal, [19] = sd_cmd_SEND_TUNING_BLOCK, + [21] = sd_emmc_cmd_SEND_TUNING_BLOCK, [41] = sd_cmd_illegal, [52 ... 54] = sd_cmd_illegal, [55] = sd_emmc_cmd_APP_CMD,
Signature · 1 line
2.36.1
PATCH v2 20/25 hw/sd: Add CMD21 tuning sequence
In reply to Philippe Mathieu-DaudéFrom: Sai Pavan Boddu <[email protected]>
MMC cards support different tuning sequence for entering HS200 mode.
--- hw/sd/sd.c | 39 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+)
hw/sd/sd.c +39 -0
@@ -2012,6 +2012,30 @@ static const uint8_t sd_tuning_block_pattern[SD_TUNING_BLOCK_SIZE] = { 0xbb, 0xff, 0xf7, 0xff, 0xf7, 0x7f, 0x7b, 0xde, }; +#define EXCSD_BUS_WIDTH_OFFSET 183 +#define BUS_WIDTH_8_MASK 0x4 +#define BUS_WIDTH_4_MASK 0x2 +#define MMC_TUNING_BLOCK_SIZE 128 + +static const uint8_t mmc_tuning_block_pattern[128 ] = { +0xff ,0xff ,0x00 ,0xff ,0xff ,0xff ,0x00 ,0x00 , +0xff ,0xff ,0xcc ,0xcc ,0xcc ,0x33 ,0xcc ,0xcc , +0xcc ,0x33 ,0x33 ,0xcc ,0xcc ,0xcc ,0xff ,0xff , +0xff ,0xee ,0xff ,0xff ,0xff ,0xee ,0xee ,0xff , +0xff ,0xff ,0xdd ,0xff ,0xff ,0xff ,0xdd ,0xdd , +0xff ,0xff ,0xff ,0xbb ,0xff ,0xff ,0xff ,0xbb , +0xbb ,0xff ,0xff ,0xff ,0x77 ,0xff ,0xff ,0xff , +0x77 ,0x77 ,0xff ,0x77 ,0xbb ,0xdd ,0xee ,0xff , +0xff ,0xff ,0xff ,0x00 ,0xff ,0xff ,0xff ,0x00 , +0x00 ,0xff ,0xff ,0xcc ,0xcc ,0xcc ,0x33 ,0xcc , +0xcc ,0xcc ,0x33 ,0x33 ,0xcc ,0xcc ,0xcc ,0xff , +0xff ,0xff ,0xee ,0xff ,0xff ,0xff ,0xee ,0xee , +0xff ,0xff ,0xff ,0xdd ,0xff ,0xff ,0xff ,0xdd , +0xdd ,0xff ,0xff ,0xff ,0xbb ,0xff ,0xff ,0xff , +0xbb ,0xbb ,0xff ,0xff ,0xff ,0x77 ,0xff ,0xff , +0xff ,0x77 ,0x77 ,0xff ,0x77 ,0xbb ,0xdd ,0xee , +}; +uint8_t sd_read_byte (SDState *sd) {/* TODO: Append CRCs */
@@ -2098,6 +2122,21 @@ uint8_t sd_read_byte(SDState *sd) ret = sd_tuning_block_pattern[sd->data_offset++];break ; +case 21 :/* CMD21: SEND_TUNING_BLOCK (MMC) */ +if (sd->data_offset >=MMC_TUNING_BLOCK_SIZE -1 ) { + sd->state = sd_transfer_state; + } +if (sd->ext_csd[EXCSD_BUS_WIDTH_OFFSET ] &BUS_WIDTH_8_MASK ) { + ret = mmc_tuning_block_pattern[sd->data_offset++]; + }else { +/* Return LSB Nibbles of two byte from the 8bit tuning block +* for 4bit mode +*/ + ret = mmc_tuning_block_pattern[sd->data_offset++] &0x0F ; + ret |= (mmc_tuning_block_pattern[sd->data_offset++] &0x0F ) <<4 ; + } +break ; +case 22 :/* ACMD22: SEND_NUM_WR_BLOCKS */ ret = sd->data[sd->data_offset ++];
Signature · 1 line
2.36.1
PATCH v2 21/25 hw/sd: Add mmc switch function support
In reply to Philippe Mathieu-DaudéFrom: Sai Pavan Boddu <[email protected]>
switch operation in mmc cards, updated the ext_csd register to request changes in card operations. Here we implement similar sequence but requests are mostly dummy and make no change.
Implement SWITCH_ERROR if the write operation offset goes beyond length of ext_csd.
--- hw/sd/sd.c | 52 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+)
hw/sd/sd.c +52 -0
@@ -476,6 +476,7 @@ static void sd_set_rca(SDState *sd) FIELD(CSR, AKE_SEQ_ERROR, 3, 1) FIELD(CSR, APP_CMD, 5, 1) FIELD(CSR, FX_EVENT, 6, 1) +FIELD(CSR, SWITCH_ERROR, 7, 1) FIELD(CSR, READY_FOR_DATA, 8, 1) FIELD(CSR, CURRENT_STATE, 9, 4)FIELD (CSR ,ERASE_RESET ,13 ,1 )
@@ -873,6 +874,43 @@ static uint32_t sd_wpbits(SDState *sd, uint64_t addr)return ret; } +enum { +MMC_CMD6_ACCESS_COMMAND_SET =0 , +MMC_CMD6_ACCESS_SET_BITS , +MMC_CMD6_ACCESS_CLEAR_BITS , +MMC_CMD6_ACCESS_WRITE_BYTE , +}; + +static void mmc_function_switch (SDState *sd,uint32_t arg) +{ +uint32_t access =extract32 (arg,24 ,2 ); +uint32_t index =extract32 (arg,16 ,8 ); +uint32_t value =extract32 (arg,8 ,8 ); +uint8_t b = sd->ext_csd[index]; + +switch (access) { +case MMC_CMD6_ACCESS_COMMAND_SET : +qemu_log_mask (LOG_UNIMP ,"MMC Command set switching not supported\n" ); +return ; +case MMC_CMD6_ACCESS_SET_BITS : + b |= value; +break ; +case MMC_CMD6_ACCESS_CLEAR_BITS : + b &= ~value; +break ; +case MMC_CMD6_ACCESS_WRITE_BYTE : + b = value; +break ; + } + +if (index >=192 ) { + sd->card_status |=R_CSR_SWITCH_ERROR_MASK ; +return ; + } + + sd->ext_csd[index] = b; +} +static void sd_function_switch (SDState *sd,uint32_t arg) {int i, mode, new_func;
@@ -2257,6 +2295,19 @@ static sd_rsp_type_t sd_emmc_cmd_SEND_TUNING_BLOCK(SDState *sd, SDRequest req)return sd_r1; } +static sd_rsp_type_t sd_emmc_cmd_SWITCH_FUNCTION (SDState *sd,SDRequest req) +{ +switch (sd->state) { +case sd_transfer_state: + sd->state = sd_programming_state; +mmc_function_switch (sd, req.arg); + sd->state = sd_transfer_state; +return sd_r1b; +default : +return sd_invalid_state_for_cmd (sd, req); + } +} +static const SDProto sd_proto_emmc = { .name ="eMMC" , .cmd = {
@@ -2265,6 +2316,7 @@ static const SDProto sd_proto_emmc = { [2] = sd_emmc_cmd_ALL_SEND_CID, [3] = sd_emmc_cmd_SEND_RELATIVE_ADDR, [5] = sd_cmd_illegal, + [6] = sd_emmc_cmd_SWITCH_FUNCTION, [19] = sd_cmd_SEND_TUNING_BLOCK, [21] = sd_emmc_cmd_SEND_TUNING_BLOCK, [41] = sd_cmd_illegal,
Signature · 1 line
2.36.1
PATCH v2 22/25 hw/sd: Add sd_emmc_cmd_SEND_EXT_CSD() handler
In reply to Philippe Mathieu-DaudéFrom: Cédric Le Goater <[email protected]>
The parameters mimick a real 4GB eMMC, but it can be set to various sizes. Initially from Vincent Palatin <[email protected]>
--- hw/sd/sd.c | 101 ++++++++++++++++++++++++++++++++++++++++- hw/sd/sdmmc-internal.h | 97 +++++++++++++++++++++++++++++++++++++++ include/hw/sd/sd.h | 1 + 3 files changed, 198 insertions(+), 1 deletion(-)
hw/sd/sd.c +100 -1
@@ -142,6 +142,7 @@ struct SDState {uint64_t data_start;uint32_t data_offset;uint8_t data[512 ]; +uint8_t ext_csd[512 ];qemu_irq readonly_cb;qemu_irq inserted_cb;QEMUTimer *ocr_power_timer;
@@ -408,8 +409,85 @@ static const uint8_t sd_csd_rw_mask[16] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xfe, }; +static void mmc_set_ext_csd (SDState *sd,uint64_t size) +{ +uint32_t sectcount = size >>HWBLOCK_SHIFT ; + +memset (sd->ext_csd,0 ,sizeof (sd->ext_csd)); + + sd->ext_csd[EXT_CSD_S_CMD_SET ] =0x1 ;/* supported command sets */ + sd->ext_csd[EXT_CSD_HPI_FEATURES ] =0x3 ;/* HPI features */ + sd->ext_csd[EXT_CSD_BKOPS_SUPPORT ] =0x1 ;/* Background operations */ + sd->ext_csd[241 ] =0xA ;/* 1st initialization time after partitioning */ + sd->ext_csd[EXT_CSD_TRIM_MULT ] =0x1 ;/* Trim multiplier */ + sd->ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT ] =0x15 ;/* Secure feature */ + sd->ext_csd[EXT_CSD_SEC_ERASE_MULT ] =0x96 ;/* Secure erase support */ + sd->ext_csd[EXT_CSD_SEC_TRIM_MULT ] =0x96 ;/* Secure TRIM multiplier */ + sd->ext_csd[EXT_CSD_BOOT_INFO ] =0x7 ;/* Boot information */ + sd->ext_csd[EXT_CSD_BOOT_MULT ] =0x8 ;/* Boot partition size. 128KB unit */ + sd->ext_csd[EXT_CSD_ACC_SIZE ] =0x6 ;/* Access size */ + sd->ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE ] =0x4 ;/* HC Erase unit size */ + sd->ext_csd[EXT_CSD_ERASE_TIMEOUT_MULT ] =0x1 ;/* HC erase timeout */ + sd->ext_csd[EXT_CSD_REL_WR_SEC_C ] =0x1 ;/* Reliable write sector count */ + sd->ext_csd[EXT_CSD_HC_WP_GRP_SIZE ] =0x4 ;/* HC write protect group size */ + sd->ext_csd[EXT_CSD_S_C_VCC ] =0x8 ;/* Sleep current VCC */ + sd->ext_csd[EXT_CSD_S_C_VCCQ ] =0x7 ;/* Sleep current VCCQ */ + sd->ext_csd[EXT_CSD_S_A_TIMEOUT ] =0x11 ;/* Sleep/Awake timeout */ + sd->ext_csd[215 ] = (sectcount >>24 ) &0xff ;/* Sector count */ + sd->ext_csd[214 ] = (sectcount >>16 ) &0xff ;/* ... */ + sd->ext_csd[213 ] = (sectcount >>8 ) &0xff ;/* ... */ + sd->ext_csd[EXT_CSD_SEC_CNT ] = (sectcount &0xff );/* ... */ + sd->ext_csd[210 ] =0xa ;/* Min write perf for 8bit@52Mhz */ + sd->ext_csd[209 ] =0xa ;/* Min read perf for 8bit@52Mhz */ + sd->ext_csd[208 ] =0xa ;/* Min write perf for 4bit@52Mhz */ + sd->ext_csd[207 ] =0xa ;/* Min read perf for 4bit@52Mhz */ + sd->ext_csd[206 ] =0xa ;/* Min write perf for 4bit@26Mhz */ + sd->ext_csd[205 ] =0xa ;/* Min read perf for 4bit@26Mhz */ + sd->ext_csd[EXT_CSD_PART_SWITCH_TIME ] =0x1 ; + sd->ext_csd[EXT_CSD_OUT_OF_INTERRUPT_TIME ] =0x1 ; + sd->ext_csd[EXT_CSD_CARD_TYPE ] =0x7 ; + sd->ext_csd[EXT_CSD_STRUCTURE ] =0x2 ; + sd->ext_csd[EXT_CSD_REV ] =0x5 ; + sd->ext_csd[EXT_CSD_RPMB_MULT ] =0x1 ;/* RPMB size */ + sd->ext_csd[EXT_CSD_PARTITION_SUPPORT ] =0x3 ; + sd->ext_csd[159 ] =0x00 ;/* Max enhanced area size */ + sd->ext_csd[158 ] =0x00 ;/* ... */ + sd->ext_csd[157 ] =0xEC ;/* ... */ +} + +static void sd_emmc_set_csd (SDState *sd,uint64_t size) +{ + sd->csd[0 ] =0xd0 ; + sd->csd[1 ] =0x0f ; + sd->csd[2 ] =0x00 ; + sd->csd[3 ] =0x32 ; + sd->csd[4 ] =0x0f ; +if (size <=2 * GiB) { +/* use 1k blocks */ +uint32_t csize1k = (size >> (CMULT_SHIFT +10 )) -1 ; + sd->csd[5 ] =0x5a ; + sd->csd[6 ] =0x80 | ((csize1k >>10 ) &0xf ); + sd->csd[7 ] = (csize1k >>2 ) &0xff ; + }else {/* >= 2GB : size stored in ext CSD, block addressing */ + sd->csd[5 ] =0x59 ; + sd->csd[6 ] =0x8f ; + sd->csd[7 ] =0xff ; + sd->ocr =FIELD_DP32 (sd->ocr,OCR ,CARD_CAPACITY ,1 ); + } + sd->csd[8 ] =0xff ; + sd->csd[9 ] =0xff ; + sd->csd[10 ] =0xf7 ; + sd->csd[11 ] =0xfe ; + sd->csd[12 ] =0x49 ; + sd->csd[13 ] =0x10 ; + sd->csd[14 ] =0x00 ; + sd->csd[15 ] = (sd_crc7 (sd->csd,15 ) <<1 ) |1 ; +mmc_set_ext_csd (sd, size); +} +static void sd_set_csd (SDState *sd,uint64_t size) { +SDCardClass *sc =SD_CARD_GET_CLASS (sd);int hwblock_shift =HWBLOCK_SHIFT ;uint32_t csize;uint32_t sectsize = (1 << (SECTOR_SHIFT +1 )) -1 ;
@@ -421,7 +499,9 @@ static void sd_set_csd(SDState *sd, uint64_t size) } csize = (size >> (CMULT_SHIFT + hwblock_shift)) -1 ; -if (size <=SDSC_MAX_CAPACITY ) {/* Standard Capacity SD */ +if (sc->set_csd) { + sc->set_csd (sd, size); + }else if (size <=SDSC_MAX_CAPACITY ) {/* Standard Capacity SD */ sd->csd[0 ] =0x00 ;/* CSD structure */ sd->csd[1 ] =0x26 ;/* Data read access-time-1 */ sd->csd[2 ] =0x00 ;/* Data read access-time-2 */
@@ -2279,6 +2359,23 @@ static sd_rsp_type_t sd_emmc_cmd_ALL_SEND_CID(SDState *sd, SDRequest req)return sd_r2_i; } +static sd_rsp_type_t sd_emmc_cmd_SEND_EXT_CSD (SDState *sd,SDRequest req) +{ +uint64_t addr = (sd->ocr & (1 <<30 )) ? (uint64_t ) req.arg <<9 : req.arg; + +switch (sd->state) { +case sd_transfer_state: +/* MMC : Sends the EXT_CSD register as a Block of data */ + sd->state = sd_sendingdata_state; +memcpy (sd->data, sd->ext_csd,sizeof (sd->ext_csd)); + sd->data_start = addr; + sd->data_offset =0 ; +return sd_r1; +default : +return sd_invalid_state_for_cmd (sd, req); + } +} +static sd_rsp_type_t sd_emmc_cmd_APP_CMD (SDState *sd,SDRequest req) {return sd_r0;
@@ -2317,6 +2414,7 @@ static const SDProto sd_proto_emmc = { [3] = sd_emmc_cmd_SEND_RELATIVE_ADDR, [5] = sd_cmd_illegal, [6] = sd_emmc_cmd_SWITCH_FUNCTION, + [8] = sd_emmc_cmd_SEND_EXT_CSD, [19] = sd_cmd_SEND_TUNING_BLOCK, [21] = sd_emmc_cmd_SEND_TUNING_BLOCK, [41] = sd_cmd_illegal,
@@ -2465,6 +2563,7 @@ static void emmc_class_init(ObjectClass *klass, void *data) dc->desc ="eMMC" ; dc->realize = emmc_realize; sc->proto = &sd_proto_emmc; + sc->set_csd = sd_emmc_set_csd; }static const TypeInfo emmc_info = {
hw/sd/sdmmc-internal.h +97 -0
101 lines not on this page · raw message
include/hw/sd/sd.h +1 -0
@@ -129,6 +129,7 @@ struct SDCardClass {bool (*get_readonly)(SDState *sd);const struct SDProto *proto; +void (*set_csd)(SDState *sd,uint64_t size); };#define TYPE_SD_BUS "sd-bus"
Signature · 1 line
2.36.1
Re: [PATCH v2 22/25] hw/sd: Add sd_emmc_cmd_SEND_EXT_CSD() handler
Quoted 7 lines · Philippe Mathieu-Daudé
From: Cédric Le Goater <[email protected]>
The parameters mimick a real 4GB eMMC, but it can be set to various sizes. Initially from Vincent Palatin <[email protected]>
Signed-off-by Cédric Le Goater <[email protected]>[PMD: Remove CMD8 (SEND_EXT_CSD) case in sd_read_byte()]
AFAICT and from the tests, this is still needed.
C.
Quoted 274 lines
Signed-off-by Philippe Mathieu-Daudé <[email protected]>--- hw/sd/sd.c | 101 ++++++++++++++++++++++++++++++++++++++++- hw/sd/sdmmc-internal.h | 97 +++++++++++++++++++++++++++++++++++++++ include/hw/sd/sd.h | 1 + 3 files changed, 198 insertions(+), 1 deletion(-)hw/sd/sd.c +100
-1@@ -142,6 +142,7 @@ struct SDState {uint64_t data_start;uint32_t data_offset;uint8_t data[512 ]; +uint8_t ext_csd[512 ];qemu_irq readonly_cb;qemu_irq inserted_cb;QEMUTimer *ocr_power_timer;@@ -408,8 +409,85 @@ static const uint8_t sd_csd_rw_mask[16] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xfe, }; +static void mmc_set_ext_csd (SDState *sd,uint64_t size) +{ +uint32_t sectcount = size >>HWBLOCK_SHIFT ; + +memset (sd->ext_csd,0 ,sizeof (sd->ext_csd)); + + sd->ext_csd[EXT_CSD_S_CMD_SET ] =0x1 ;/* supported command sets */ + sd->ext_csd[EXT_CSD_HPI_FEATURES ] =0x3 ;/* HPI features */ + sd->ext_csd[EXT_CSD_BKOPS_SUPPORT ] =0x1 ;/* Background operations */ + sd->ext_csd[241 ] =0xA ;/* 1st initialization time after partitioning */ + sd->ext_csd[EXT_CSD_TRIM_MULT ] =0x1 ;/* Trim multiplier */ + sd->ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT ] =0x15 ;/* Secure feature */ + sd->ext_csd[EXT_CSD_SEC_ERASE_MULT ] =0x96 ;/* Secure erase support */ + sd->ext_csd[EXT_CSD_SEC_TRIM_MULT ] =0x96 ;/* Secure TRIM multiplier */ + sd->ext_csd[EXT_CSD_BOOT_INFO ] =0x7 ;/* Boot information */ + sd->ext_csd[EXT_CSD_BOOT_MULT ] =0x8 ;/* Boot partition size. 128KB unit */ + sd->ext_csd[EXT_CSD_ACC_SIZE ] =0x6 ;/* Access size */ + sd->ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE ] =0x4 ;/* HC Erase unit size */ + sd->ext_csd[EXT_CSD_ERASE_TIMEOUT_MULT ] =0x1 ;/* HC erase timeout */ + sd->ext_csd[EXT_CSD_REL_WR_SEC_C ] =0x1 ;/* Reliable write sector count */ + sd->ext_csd[EXT_CSD_HC_WP_GRP_SIZE ] =0x4 ;/* HC write protect group size */ + sd->ext_csd[EXT_CSD_S_C_VCC ] =0x8 ;/* Sleep current VCC */ + sd->ext_csd[EXT_CSD_S_C_VCCQ ] =0x7 ;/* Sleep current VCCQ */ + sd->ext_csd[EXT_CSD_S_A_TIMEOUT ] =0x11 ;/* Sleep/Awake timeout */ + sd->ext_csd[215 ] = (sectcount >>24 ) &0xff ;/* Sector count */ + sd->ext_csd[214 ] = (sectcount >>16 ) &0xff ;/* ... */ + sd->ext_csd[213 ] = (sectcount >>8 ) &0xff ;/* ... */ + sd->ext_csd[EXT_CSD_SEC_CNT ] = (sectcount &0xff );/* ... */ + sd->ext_csd[210 ] =0xa ;/* Min write perf for 8bit@52Mhz */ + sd->ext_csd[209 ] =0xa ;/* Min read perf for 8bit@52Mhz */ + sd->ext_csd[208 ] =0xa ;/* Min write perf for 4bit@52Mhz */ + sd->ext_csd[207 ] =0xa ;/* Min read perf for 4bit@52Mhz */ + sd->ext_csd[206 ] =0xa ;/* Min write perf for 4bit@26Mhz */ + sd->ext_csd[205 ] =0xa ;/* Min read perf for 4bit@26Mhz */ + sd->ext_csd[EXT_CSD_PART_SWITCH_TIME ] =0x1 ; + sd->ext_csd[EXT_CSD_OUT_OF_INTERRUPT_TIME ] =0x1 ; + sd->ext_csd[EXT_CSD_CARD_TYPE ] =0x7 ; + sd->ext_csd[EXT_CSD_STRUCTURE ] =0x2 ; + sd->ext_csd[EXT_CSD_REV ] =0x5 ; + sd->ext_csd[EXT_CSD_RPMB_MULT ] =0x1 ;/* RPMB size */ + sd->ext_csd[EXT_CSD_PARTITION_SUPPORT ] =0x3 ; + sd->ext_csd[159 ] =0x00 ;/* Max enhanced area size */ + sd->ext_csd[158 ] =0x00 ;/* ... */ + sd->ext_csd[157 ] =0xEC ;/* ... */ +} + +static void sd_emmc_set_csd (SDState *sd,uint64_t size) +{ + sd->csd[0 ] =0xd0 ; + sd->csd[1 ] =0x0f ; + sd->csd[2 ] =0x00 ; + sd->csd[3 ] =0x32 ; + sd->csd[4 ] =0x0f ; +if (size <=2 * GiB) { +/* use 1k blocks */ +uint32_t csize1k = (size >> (CMULT_SHIFT +10 )) -1 ; + sd->csd[5 ] =0x5a ; + sd->csd[6 ] =0x80 | ((csize1k >>10 ) &0xf ); + sd->csd[7 ] = (csize1k >>2 ) &0xff ; + }else {/* >= 2GB : size stored in ext CSD, block addressing */ + sd->csd[5 ] =0x59 ; + sd->csd[6 ] =0x8f ; + sd->csd[7 ] =0xff ; + sd->ocr =FIELD_DP32 (sd->ocr,OCR ,CARD_CAPACITY ,1 ); + } + sd->csd[8 ] =0xff ; + sd->csd[9 ] =0xff ; + sd->csd[10 ] =0xf7 ; + sd->csd[11 ] =0xfe ; + sd->csd[12 ] =0x49 ; + sd->csd[13 ] =0x10 ; + sd->csd[14 ] =0x00 ; + sd->csd[15 ] = (sd_crc7 (sd->csd,15 ) <<1 ) |1 ; +mmc_set_ext_csd (sd, size); +} +static void sd_set_csd (SDState *sd,uint64_t size) { +SDCardClass *sc =SD_CARD_GET_CLASS (sd);int hwblock_shift =HWBLOCK_SHIFT ;uint32_t csize;uint32_t sectsize = (1 << (SECTOR_SHIFT +1 )) -1 ;@@ -421,7 +499,9 @@ static void sd_set_csd(SDState *sd, uint64_t size) } csize = (size >> (CMULT_SHIFT + hwblock_shift)) -1 ; -if (size <=SDSC_MAX_CAPACITY ) {/* Standard Capacity SD */ +if (sc->set_csd) { + sc->set_csd (sd, size); + }else if (size <=SDSC_MAX_CAPACITY ) {/* Standard Capacity SD */ sd->csd[0 ] =0x00 ;/* CSD structure */ sd->csd[1 ] =0x26 ;/* Data read access-time-1 */ sd->csd[2 ] =0x00 ;/* Data read access-time-2 */ @@ -2279,6 +2359,23 @@ static sd_rsp_type_t sd_emmc_cmd_ALL_SEND_CID(SDState *sd, SDRequest req)return sd_r2_i; } +static sd_rsp_type_t sd_emmc_cmd_SEND_EXT_CSD (SDState *sd,SDRequest req) +{ +uint64_t addr = (sd->ocr & (1 <<30 )) ? (uint64_t ) req.arg <<9 : req.arg; + +switch (sd->state) { +case sd_transfer_state: +/* MMC : Sends the EXT_CSD register as a Block of data */ + sd->state = sd_sendingdata_state; +memcpy (sd->data, sd->ext_csd,sizeof (sd->ext_csd)); + sd->data_start = addr; + sd->data_offset =0 ; +return sd_r1; +default : +return sd_invalid_state_for_cmd (sd, req); + } +} +static sd_rsp_type_t sd_emmc_cmd_APP_CMD (SDState *sd,SDRequest req) {return sd_r0;@@ -2317,6 +2414,7 @@ static const SDProto sd_proto_emmc = { [3] = sd_emmc_cmd_SEND_RELATIVE_ADDR, [5] = sd_cmd_illegal, [6] = sd_emmc_cmd_SWITCH_FUNCTION, + [8] = sd_emmc_cmd_SEND_EXT_CSD, [19] = sd_cmd_SEND_TUNING_BLOCK, [21] = sd_emmc_cmd_SEND_TUNING_BLOCK, [41] = sd_cmd_illegal,@@ -2465,6 +2563,7 @@ static void emmc_class_init(ObjectClass *klass, void *data) dc->desc ="eMMC" ; dc->realize = emmc_realize; sc->proto = &sd_proto_emmc; + sc->set_csd = sd_emmc_set_csd; }static const TypeInfo emmc_info = {hw/sd/sdmmc-internal.h +97
-0@@ -37,4 +37,101 @@ const char *sd_cmd_name(uint8_t cmd);*/ const char *sd_acmd_name (uint8_t cmd); +/* +* EXT_CSD fields +*/ + +#define EXT_CSD_CMDQ_MODE_EN 15/* R/W */ +#define EXT_CSD_FLUSH_CACHE 32/* W */ +#define EXT_CSD_CACHE_CTRL 33/* R/W */ +#define EXT_CSD_POWER_OFF_NOTIFICATION 34/* R/W */ +#define EXT_CSD_PACKED_FAILURE_INDEX 35/* RO */ +#define EXT_CSD_PACKED_CMD_STATUS 36/* RO */ +#define EXT_CSD_EXP_EVENTS_STATUS 54/* RO, 2 bytes */ +#define EXT_CSD_EXP_EVENTS_CTRL 56/* R/W, 2 bytes */ +#define EXT_CSD_DATA_SECTOR_SIZE 61/* R */ +#define EXT_CSD_GP_SIZE_MULT 143/* R/W */ +#define EXT_CSD_PARTITION_SETTING_COMPLETED 155/* R/W */ +#define EXT_CSD_PARTITION_ATTRIBUTE 156/* R/W */ +#define EXT_CSD_PARTITION_SUPPORT 160/* RO */ +#define EXT_CSD_HPI_MGMT 161/* R/W */ +#define EXT_CSD_RST_N_FUNCTION 162/* R/W */ +#define EXT_CSD_BKOPS_EN 163/* R/W */ +#define EXT_CSD_BKOPS_START 164/* W */ +#define EXT_CSD_SANITIZE_START 165/* W */ +#define EXT_CSD_WR_REL_PARAM 166/* RO */ +#define EXT_CSD_RPMB_MULT 168/* RO */ +#define EXT_CSD_FW_CONFIG 169/* R/W */ +#define EXT_CSD_BOOT_WP 173/* R/W */ +#define EXT_CSD_ERASE_GROUP_DEF 175/* R/W */ +#define EXT_CSD_PART_CONFIG 179/* R/W */ +#define EXT_CSD_ERASED_MEM_CONT 181/* RO */ +#define EXT_CSD_BUS_WIDTH 183/* R/W */ +#define EXT_CSD_STROBE_SUPPORT 184/* RO */ +#define EXT_CSD_HS_TIMING 185/* R/W */ +#define EXT_CSD_POWER_CLASS 187/* R/W */ +#define EXT_CSD_REV 192/* RO */ +#define EXT_CSD_STRUCTURE 194/* RO */ +#define EXT_CSD_CARD_TYPE 196/* RO */ +#define EXT_CSD_DRIVER_STRENGTH 197/* RO */ +#define EXT_CSD_OUT_OF_INTERRUPT_TIME 198/* RO */ +#define EXT_CSD_PART_SWITCH_TIME 199/* RO */ +#define EXT_CSD_PWR_CL_52_195 200/* RO */ +#define EXT_CSD_PWR_CL_26_195 201/* RO */ +#define EXT_CSD_PWR_CL_52_360 202/* RO */ +#define EXT_CSD_PWR_CL_26_360 203/* RO */ +#define EXT_CSD_SEC_CNT 212/* RO, 4 bytes */ +#define EXT_CSD_S_A_TIMEOUT 217/* RO */ +#define EXT_CSD_S_C_VCCQ 219/* RO */ +#define EXT_CSD_S_C_VCC 220/* RO */ +#define EXT_CSD_REL_WR_SEC_C 222/* RO */ +#define EXT_CSD_HC_WP_GRP_SIZE 221/* RO */ +#define EXT_CSD_ERASE_TIMEOUT_MULT 223/* RO */ +#define EXT_CSD_HC_ERASE_GRP_SIZE 224/* RO */ +#define EXT_CSD_ACC_SIZE 225/* RO */ +#define EXT_CSD_BOOT_MULT 226/* RO */ +#define EXT_CSD_BOOT_INFO 228/* RO */ +#define EXT_CSD_SEC_TRIM_MULT 229/* RO */ +#define EXT_CSD_SEC_ERASE_MULT 230/* RO */ +#define EXT_CSD_SEC_FEATURE_SUPPORT 231/* RO */ +#define EXT_CSD_TRIM_MULT 232/* RO */ +#define EXT_CSD_PWR_CL_200_195 236/* RO */ +#define EXT_CSD_PWR_CL_200_360 237/* RO */ +#define EXT_CSD_PWR_CL_DDR_52_195 238/* RO */ +#define EXT_CSD_PWR_CL_DDR_52_360 239/* RO */ +#define EXT_CSD_BKOPS_STATUS 246/* RO */ +#define EXT_CSD_POWER_OFF_LONG_TIME 247/* RO */ +#define EXT_CSD_GENERIC_CMD6_TIME 248/* RO */ +#define EXT_CSD_CACHE_SIZE 249/* RO, 4 bytes */ +#define EXT_CSD_PWR_CL_DDR_200_360 253/* RO */ +#define EXT_CSD_FIRMWARE_VERSION 254/* RO, 8 bytes */ +#define EXT_CSD_PRE_EOL_INFO 267/* RO */ +#define EXT_CSD_DEVICE_LIFE_TIME_EST_TYP_A 268/* RO */ +#define EXT_CSD_DEVICE_LIFE_TIME_EST_TYP_B 269/* RO */ +#define EXT_CSD_CMDQ_DEPTH 307/* RO */ +#define EXT_CSD_CMDQ_SUPPORT 308/* RO */ +#define EXT_CSD_SUPPORTED_MODE 493/* RO */ +#define EXT_CSD_TAG_UNIT_SIZE 498/* RO */ +#define EXT_CSD_DATA_TAG_SUPPORT 499/* RO */ +#define EXT_CSD_MAX_PACKED_WRITES 500/* RO */ +#define EXT_CSD_MAX_PACKED_READS 501/* RO */ +#define EXT_CSD_BKOPS_SUPPORT 502/* RO */ +#define EXT_CSD_HPI_FEATURES 503/* RO */ +#define EXT_CSD_S_CMD_SET 504/* RO */ + +/* +* EXT_CSD field definitions +*/ + +#define EXT_CSD_WR_REL_PARAM_EN (1 << 2) +#define EXT_CSD_WR_REL_PARAM_EN_RPMB_REL_WR (1 << 4) + +#define EXT_CSD_PART_CONFIG_ACC_MASK (0x7) +#define EXT_CSD_PART_CONFIG_ACC_DEFAULT (0x0) +#define EXT_CSD_PART_CONFIG_ACC_BOOT0 (0x1) + +#define EXT_CSD_PART_CONFIG_EN_MASK (0x7 << 3) +#define EXT_CSD_PART_CONFIG_EN_BOOT0 (0x1 << 3) +#define EXT_CSD_PART_CONFIG_EN_USER (0x7 << 3) +#endif include/hw/sd/sd.h +1
-0@@ -129,6 +129,7 @@ struct SDCardClass {bool (*get_readonly)(SDState *sd);const struct SDProto *proto; +void (*set_csd)(SDState *sd,uint64_t size); };#define TYPE_SD_BUS "sd-bus"
PATCH v2 23/25 hw/sd: Support boot area in emmc image
In reply to Philippe Mathieu-DaudéFrom: Joel Stanley <[email protected]>
This assumes a specially constructued image:
dd if=/dev/zero of=mmc-bootarea.img count=2 bs=1M dd if=u-boot-spl.bin of=mmc-bootarea.img conv=notrunc dd if=u-boot.bin of=mmc-bootarea.img conv=notrunc count=64 bs=1K cat mmc-bootarea.img obmc-phosphor-image.wic > mmc.img truncate --size 16GB mmc.img truncate --size 128MB mmc-bootarea.img
For now this still requires a mtd image to load the SPL:
qemu-system-arm -M tacoma-bmc -nographic \ -global driver=sd-card,property=emmc,value=true \ -drive file=mmc.img,if=sd,index=2 \ -drive file=mmc-bootarea.img,if=mtd,format=raw
[clg: - definition renames
- Introduced bootpart_offset
- Introduced sd_boot_capacity_bytes() helper (Philippe) ]
--- hw/sd/sd.c | 39 +++++++++++++++++++++++++++++++++++++++ include/hw/sd/sd.h | 1 + 2 files changed, 40 insertions(+)
hw/sd/sd.c +39 -0
@@ -659,6 +659,12 @@ static inline uint64_t sd_addr_to_wpnum(uint64_t addr)return addr >> (HWBLOCK_SHIFT +SECTOR_SHIFT +WPGROUP_SHIFT ); } + +static unsigned sd_boot_capacity_bytes (SDState *sd) +{ +return sd->ext_csd[EXT_CSD_BOOT_MULT ] <<17 ; +} +static void sd_reset (DeviceState *dev) {SDState *sd =SD_CARD (dev);
@@ -857,9 +863,40 @@ void sd_set_cb(SDState *sd, qemu_irq readonly, qemu_irq insert)qemu_set_irq (insert, sd->blk ?blk_is_inserted (sd->blk) :0 ); } +/* +* This requires a disk image that has two boot partitions inserted at the +* beginning of it. The size of the boot partitions are configured in the +* ext_csd structure, which is hardcoded in qemu. They are currently set to +* 1MB each. +*/ +static uint32_t sd_emmc_bootpart_offset (SDState *sd) +{ +unsigned int access = sd->ext_csd[EXT_CSD_PART_CONFIG ] & +EXT_CSD_PART_CONFIG_ACC_MASK ; +unsigned int boot_capacity =sd_boot_capacity_bytes (sd); + +switch (access) { +case EXT_CSD_PART_CONFIG_ACC_DEFAULT : +return boot_capacity *2 ; +case EXT_CSD_PART_CONFIG_ACC_BOOT0 : +return 0 ; +case EXT_CSD_PART_CONFIG_ACC_BOOT0 +1 : +return boot_capacity *1 ; +default : +g_assert_not_reached (); + } +} + +static uint32_t sd_bootpart_offset (SDState *sd) +{ +SDCardClass *sc =SD_CARD_GET_CLASS (sd); +return sc->bootpart_offset ? sc->bootpart_offset (sd) :0 ; +} +static void sd_blk_read (SDState *sd,uint64_t addr,uint32_t len) {trace_sdcard_read_block (addr, len); + addr +=sd_bootpart_offset (sd);if (!sd->blk ||blk_pread (sd->blk, addr, sd->data, len) <0 ) {fprintf (stderr,"sd_blk_read: read error on host side\n" ); }
@@ -868,6 +905,7 @@ static void sd_blk_read(SDState *sd, uint64_t addr, uint32_t len)static void sd_blk_write (SDState *sd,uint64_t addr,uint32_t len) {trace_sdcard_write_block (addr, len); + addr +=sd_bootpart_offset (sd);if (!sd->blk ||blk_pwrite (sd->blk, addr, sd->data, len,0 ) <0 ) {fprintf (stderr,"sd_blk_write: write error on host side\n" ); }
@@ -2564,6 +2602,7 @@ static void emmc_class_init(ObjectClass *klass, void *data) dc->realize = emmc_realize; sc->proto = &sd_proto_emmc; sc->set_csd = sd_emmc_set_csd; + sc->bootpart_offset = sd_emmc_bootpart_offset; }static const TypeInfo emmc_info = {
include/hw/sd/sd.h +1 -0
@@ -130,6 +130,7 @@ struct SDCardClass {const struct SDProto *proto;void (*set_csd)(SDState *sd,uint64_t size); +uint32_t (*bootpart_offset)(SDState *sd); };#define TYPE_SD_BUS "sd-bus"
Signature · 1 line
2.36.1
PATCH v2 24/25 hw/sd: Subtract bootarea size from blk
In reply to Philippe Mathieu-DaudéFrom: Joel Stanley <[email protected]>
The userdata size is derived from the file the user passes on the command line, but we must take into account the boot areas.
--- hw/sd/sd.c | 5 +++++ 1 file changed, 5 insertions(+)
hw/sd/sd.c +5 -0
@@ -668,6 +668,7 @@ static unsigned sd_boot_capacity_bytes(SDState *sd)static void sd_reset (DeviceState *dev) {SDState *sd =SD_CARD (dev); +SDCardClass *sc =SD_CARD_GET_CLASS (sd);uint64_t size;uint64_t sect;
@@ -679,6 +680,10 @@ static void sd_reset(DeviceState *dev) } size = sect <<9 ; +if (sc->bootpart_offset) { + size -=sd_boot_capacity_bytes (sd) *2 ; + } + sect =sd_addr_to_wpnum (size) +1 ; sd->state = sd_idle_state;
Signature · 1 line
2.36.1
PATCH v2 25/25 hw/sd: Add boot config support
In reply to Philippe Mathieu-DaudéFrom: Joel Stanley <[email protected]>
Introduced "boot-config" property to set CSD 179, the boot config register.
With this correctly set we can use the enable bit to detect if partition support is enabled.
--- hw/sd/sd.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
hw/sd/sd.c +10 -0
@@ -116,6 +116,7 @@ struct SDState {uint8_t spec_version;BlockBackend *blk;bool spi; +uint8_t boot_config;/* Runtime changeables */
@@ -453,6 +454,8 @@ static void mmc_set_ext_csd(SDState *sd, uint64_t size) sd->ext_csd[159 ] =0x00 ;/* Max enhanced area size */ sd->ext_csd[158 ] =0x00 ;/* ... */ sd->ext_csd[157 ] =0xEC ;/* ... */ + + sd->ext_csd[EXT_CSD_PART_CONFIG ] = sd->boot_config; }static void sd_emmc_set_csd (SDState *sd,uint64_t size)
@@ -878,8 +881,14 @@ static uint32_t sd_emmc_bootpart_offset(SDState *sd) {unsigned int access = sd->ext_csd[EXT_CSD_PART_CONFIG ] &EXT_CSD_PART_CONFIG_ACC_MASK ; +unsigned int enable = sd->ext_csd[EXT_CSD_PART_CONFIG ] & +EXT_CSD_PART_CONFIG_EN_MASK ;unsigned int boot_capacity =sd_boot_capacity_bytes (sd); +if (!enable) { +return 0 ; + } +switch (access) {case EXT_CSD_PART_CONFIG_ACC_DEFAULT :return boot_capacity *2 ;
@@ -2548,6 +2557,7 @@ static Property sd_properties[] = {* board to ensure that ssi transfers only occur when the chip select * is asserted. */ DEFINE_PROP_BOOL ("spi" , SDState, spi, false), +DEFINE_PROP_UINT8 ("boot-config" , SDState, boot_config,0x0 ), DEFINE_PROP_END_OF_LIST() };
Signature · 1 line
2.36.1
Quoted 6 lines · Philippe Mathieu-Daudé
From: Philippe Mathieu-Daudé <[email protected]>
Rebase/respin of Cédric RFC:
https://lore.kernel.org/qemu-devel/[email protected]/
(sorry it took me so long guys...)
Quoted 6 lines
Pushed at https://gitlab.com/philmd/qemu/-/commits/emmc-v2
I plan to queue patches 1-12 via sdmmc-next later this week.
Cédric, if you are happy with this series, it should be easy to rebase your other patches on top and address the comments I left on the RFC :)
Sure. I will for the first patches to be merged and I might introduce a base class.
Thanks,
C.
Quoted 44 lines
Regards,
Phil.
Cédric Le Goater (6):
hw/sd: Addsd_emmc_cmd_SEND_OP_CMD()handler hw/sd: Addsd_emmc_cmd_ALL_SEND_CID()handler hw/sd: Addsd_emmc_cmd_SEND_RELATIVE_ADDR()handler hw/sd: Addsd_emmc_cmd_APP_CMD()handler hw/sd: addsd_emmc_cmd_SEND_TUNING_BLOCK()handler hw/sd: Addsd_emmc_cmd_SEND_EXT_CSD()handlerJoel Stanley (4):
hw/sd: Addsd_cmd_SEND_TUNING_BLOCK()handler
hw/sd: Support boot area in emmc image
hw/sd: Subtract bootarea size from blk
hw/sd: Add boot config supportPhilippe Mathieu-Daudé (13):
hw/sd/sdcard: Return ILLEGAL for CMD19/CMD23 prior SD spec v3.01 hw/sd: When card is in wrong state, log which state it is hw/sd: When card is in wrong state, log which spec version is used hw/sd: Moveproto_nameto SDProto structure
hw/sd: Introducesd_cmd_handlertype
hw/sd: Addsd_cmd_illegal()handler
hw/sd: Addsd_cmd_unimplemented()handler
hw/sd: Addsd_cmd_GO_IDLE_STATE()handler
hw/sd: Addsd_cmd_SEND_OP_CMD()handler
hw/sd: Addsd_cmd_ALL_SEND_CID()handler
hw/sd: Addsd_cmd_SEND_RELATIVE_ADDR()handler
hw/sd: Addsd_cmd_SET_BLOCK_COUNT()handler
hw/sd: Basis for eMMC supportSai Pavan Boddu (2):
hw/sd: Add CMD21 tuning sequence
hw/sd: Add mmc switch function supporthw/sd/sd.c | 645 +++++++++++++++++++++++++++++++++-------- hw/sd/sdmmc-internal.c | 2 +- hw/sd/sdmmc-internal.h | 97 +++++++ include/hw/sd/sd.h | 7 + 4 files changed, 627 insertions(+), 124 deletions(-)
Quoted 9 lines · Cédric Le Goater
Quoted 8 lines · Philippe Mathieu-Daudé
From: Philippe Mathieu-Daudé <[email protected]>
Rebase/respin of Cédric RFC:
https://lore.kernel.org/qemu-devel/[email protected]/
(sorry it took me so long guys...)
Quoted 7 lines
Quoted 4 lines
I plan to queue patches 1-12 via sdmmc-next later this week.
Cédric, if you are happy with this series, it should be easy to rebase your other patches on top and address the comments I left on the RFC :)
Sure. I will for the first patches to be merged and I might introduce a base class.
Then consider patches 1-13 queued.
Quoted 8 lines
Thanks,
C.
Quoted 4 lines
Regards,
Phil.
Quoted 5 lines · Philippe Mathieu-Daudé
Quoted 4 lines · Cédric Le Goater
Quoted 2 lines · Philippe Mathieu-Daudé
I plan to queue patches 1-12 via sdmmc-next later this week.
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
Cédric, if you are happy with this series, it should be easy to rebase your other patches on top and address the comments I left on the RFC :)
Sure. I will for the first patches to be merged and I might introduce a base class.
Then consider patches 1-13 queued.
Oops too fast, new patches 3 & 13 are not reviewed.
Quoted 6 lines · Philippe Mathieu-Daudé
From: Philippe Mathieu-Daudé <[email protected]>
Rebase/respin of Cédric RFC:
https://lore.kernel.org/qemu-devel/[email protected]/
(sorry it took me so long guys...)
Quoted 6 lines
Pushed at https://gitlab.com/philmd/qemu/-/commits/emmc-v2
I plan to queue patches 1-12 via sdmmc-next later this week.
Cédric, if you are happy with this series, it should be easy to rebase your other patches on top and address the comments I left on the RFC :)
I pushed an update on :
https://github.com/legoater/qemu/commits/aspeed-7.1
Here is an image :
https://www.kaod.org/qemu/aspeed/mmc-p10bmc.qcow2
run with :
qemu-system-arm -M rainier-bmc -net nic -net user -drive file=./mmc-p10bmc.qcow2,format=qcow2,if=sd,id=sd0,index=2 -nographic -nodefaults -snapshot -serial mon:stdio
Thanks,
C.
Quoted 43 lines
Regards,
Phil.
Cédric Le Goater (6):
hw/sd: Addsd_emmc_cmd_SEND_OP_CMD()handler hw/sd: Addsd_emmc_cmd_ALL_SEND_CID()handler hw/sd: Addsd_emmc_cmd_SEND_RELATIVE_ADDR()handler hw/sd: Addsd_emmc_cmd_APP_CMD()handler hw/sd: addsd_emmc_cmd_SEND_TUNING_BLOCK()handler hw/sd: Addsd_emmc_cmd_SEND_EXT_CSD()handlerJoel Stanley (4):
hw/sd: Addsd_cmd_SEND_TUNING_BLOCK()handler
hw/sd: Support boot area in emmc image
hw/sd: Subtract bootarea size from blk
hw/sd: Add boot config supportPhilippe Mathieu-Daudé (13):
hw/sd/sdcard: Return ILLEGAL for CMD19/CMD23 prior SD spec v3.01 hw/sd: When card is in wrong state, log which state it is hw/sd: When card is in wrong state, log which spec version is used hw/sd: Moveproto_nameto SDProto structure
hw/sd: Introducesd_cmd_handlertype
hw/sd: Addsd_cmd_illegal()handler
hw/sd: Addsd_cmd_unimplemented()handler
hw/sd: Addsd_cmd_GO_IDLE_STATE()handler
hw/sd: Addsd_cmd_SEND_OP_CMD()handler
hw/sd: Addsd_cmd_ALL_SEND_CID()handler
hw/sd: Addsd_cmd_SEND_RELATIVE_ADDR()handler
hw/sd: Addsd_cmd_SET_BLOCK_COUNT()handler
hw/sd: Basis for eMMC supportSai Pavan Boddu (2):
hw/sd: Add CMD21 tuning sequence
hw/sd: Add mmc switch function supporthw/sd/sd.c | 645 +++++++++++++++++++++++++++++++++-------- hw/sd/sdmmc-internal.c | 2 +- hw/sd/sdmmc-internal.h | 97 +++++++ include/hw/sd/sd.h | 7 + 4 files changed, 627 insertions(+), 124 deletions(-)
Quoted 20 lines · Cédric Le Goater
Quoted 6 lines · Philippe Mathieu-Daudé
From: Philippe Mathieu-Daudé <[email protected]>
Rebase/respin of Cédric RFC:
https://lore.kernel.org/qemu-devel/[email protected]/
(sorry it took me so long guys...)Quoted 6 lines
Pushed at https://gitlab.com/philmd/qemu/-/commits/emmc-v2
I plan to queue patches 1-12 via sdmmc-next later this week.
Cédric, if you are happy with this series, it should be easy to rebase your other patches on top and address the comments I left on the RFC :)
I pushed an update on :
https://github.com/legoater/qemu/commits/aspeed-7.1
Here is an image :
Quoted 7 lines
https://www.kaod.org/qemu/aspeed/mmc-p10bmc.qcow2
run with :
qemu-system-arm -M rainier-bmc -net nic -net user -drive
file=./mmc-p10bmc.qcow2,format=qcow2,if=sd,id=sd0,index=2 -nographic -nodefaults -snapshot -serial mon:stdio
Useful, thanks.
I see in hw/arm/aspeed_ast2600.c:
/* Init sd card slot class here so that they're under the correct
parent */
for (i = 0; i < ASPEED_SDHCI_NUM_SLOTS; ++i) {
object_initialize_child(obj, "sd-controller.sdhci[*]",
&s->sdhci.slots[i], TYPE_SYSBUS_SDHCI);
}
object_initialize_child(obj, "emmc-controller.sdhci",
&s->emmc.slots[0],
TYPE_SYSBUS_SDHCI);
/* eMMC Boot Controller stub */
create_unimplemented_device("aspeed.emmc-boot-controller",
sc->memmap[ASPEED_DEV_EMMC_BC],
0x1000);
/* eMMC */
if (!sysbus_realize(SYS_BUS_DEVICE(&s->emmc), errp)) {
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->emmc), 0,
sc->memmap[ASPEED_DEV_EMMC]);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->emmc), 0,
aspeed_soc_get_irq(s, ASPEED_DEV_EMMC));Where is 'emmc-controller.sdhci' realized?
In aspeed_sdhci_realize() you set sd-spec-version" = 2, is that OK with eMMC?
What expects the real hw?
Thanks,
Phil.
Quoted 53 lines · Philippe Mathieu-Daudé
Quoted 18 lines · Cédric Le Goater
Quoted 6 lines · Philippe Mathieu-Daudé
From: Philippe Mathieu-Daudé <[email protected]>
Rebase/respin of Cédric RFC:
https://lore.kernel.org/qemu-devel/[email protected]/
(sorry it took me so long guys...)Quoted 6 lines
Pushed at https://gitlab.com/philmd/qemu/-/commits/emmc-v2
I plan to queue patches 1-12 via sdmmc-next later this week.
Cédric, if you are happy with this series, it should be easy to rebase your other patches on top and address the comments I left on the RFC :)
I pushed an update on :
Quoted 7 lines
Here is an image :
https://www.kaod.org/qemu/aspeed/mmc-p10bmc.qcow2
run with :
qemu-system-arm -M rainier-bmc -net nic -net user -drive file=./mmc-p10bmc.qcow2,format=qcow2,if=sd,id=sd0,index=2 -nographic -nodefaults -snapshot -serial mon:stdio
Useful, thanks.
I see in
hw/arm/aspeed_ast2600.c:/* Init sd card slot class here so that they're under the correct parent */ for (i = 0; i <
ASPEED_SDHCI_NUM_SLOTS; ++i) {object_initialize_child(obj, "sd-controller.sdhci[*]", &s->sdhci.slots[i], TYPE_SYSBUS_SDHCI); }
object_initialize_child(obj, "emmc-controller.sdhci", &s->emmc.slots[0], TYPE_SYSBUS_SDHCI);/* eMMC Boot Controller stub */
create_unimplemented_device("aspeed.emmc-boot-controller", sc->memmap[ASPEED_DEV_EMMC_BC], 0x1000);/* eMMC */
if (!sysbus_realize(SYS_BUS_DEVICE(&s->emmc), errp)) { return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->emmc), 0, sc->memmap[ASPEED_DEV_EMMC]);sysbus_connect_irq(SYS_BUS_DEVICE(&s->emmc), 0, aspeed_soc_get_irq(s, ASPEED_DEV_EMMC));
Quoted 1 line
Where is 'emmc-controller.sdhci' realized?
the slots are realized in aspeed_sdhci_realize(). It's not very symmetric and the names are confusing.
I think that one of the problems is that the instance_init routine of TYPE_ASPEED_SDHCI object doesn't know on how much slots object_initialize_child() should be called since it depends on its flavor : SD/eMMC.
Quoted 2 lines
In
aspeed_sdhci_realize()you set sd-spec-version" = 2, is that OK with eMMC?
ah yes. it boots anyhow.
Quoted 1 line
What expects the real hw?
ast2400 ast2500 ast2600
SDHC card v2.0/v3.0 v2.0/v3.0 v2.0/v3.0
SDIO Host v2.0 v2.0 v2.0
SD slots 2 2 2 eMMC x v4.51 v5.1 eMMC slots x 1 1
on the ast2500, the SDIO and eMMC logics are combined in one controller but since it is not used, QEMU does not model the eMMC part.
Thanks,
C.