Skip to contentSkip to conversation

xsm: refactor and optimize policy loading

PATCH Superseded Daniel P. Smith 3 participants 9 messages May 30, 2022 – May 31, 2022

v2 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

v2 cover xsm: refactor and optimize policy loading

This series was born out of some cleanup work done while crafting the hyperlaunch boot modules patch series. The primary purpose of this series was to stop walking all boot modules when it was not necessary, but the scope creeped during review.

Changes in v2:
* changed init_policy to policy_file_required
* split the patch into a series
* corrected casting of policy buffer
* use IS_ENABLED() instead of #ifdef sequence
* moved #ifdef inside of braces for xsm_dt_policy_init()
* addressed lack of error handling of xsm{mb,dt}_init()

Daniel P. Smith (3):
xsm: only search for a policy file when needed
xsm: consolidate loading the policy buffer
xsm: properly handle error from XSM init

 xen/arch/arm/setup.c  | 10 ++++----
 xen/arch/x86/setup.c  |  9 +++++--
 xen/include/xsm/xsm.h |  2 +-
 xen/xsm/xsm_core.c    | 56 +++++++++++++++++++++----------------------
 xen/xsm/xsm_policy.c  | 31 ++++++++++++++++++++----
 5 files changed, 68 insertions(+), 40 deletions(-)
Signature · 1 line
2.20.1
#1 lore raw

PATCH v2 1/3 xsm: only search for a policy file when needed

It is possible to select a few different build configurations that results in the unnecessary walking of the boot module list looking for a policy module. This specifically occurs when the flask policy is enabled but either the dummy or the SILO policy is selected as the enforcing policy. This is not ideal for configurations like hyperlaunch and dom0less when there could be a number of modules to be walked or doing an unnecessary device tree lookup.

This patch introduces the policy_file_required flag for tracking when an XSM policy module requires a policy file. Only when the policy_file_required flag is set to true, will XSM search the boot modules for a policy file.

---
 xen/xsm/xsm_core.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)
xen/xsm/xsm_core.c +14 -2
index 2286a502e3..4a29ee9558 100644
@@ -55,19 +55,31 @@ static enum xsm_bootparam __initdata xsm_bootparam =
     XSM_BOOTPARAM_DUMMY;
 #endif
 
+static bool __initdata policy_file_required =
+    IS_ENABLED(CONFIG_XSM_FLASK_DEFAULT);
+
 static int __init cf_check parse_xsm_param(const char *s)
 {
     int rc = 0;
 
     if ( !strcmp(s, "dummy") )
+    {
         xsm_bootparam = XSM_BOOTPARAM_DUMMY;
+        policy_file_required = false;
+    }
 #ifdef CONFIG_XSM_FLASK
     else if ( !strcmp(s, "flask") )
+    {
         xsm_bootparam = XSM_BOOTPARAM_FLASK;
+        policy_file_required = true;
+    }
 #endif
 #ifdef CONFIG_XSM_SILO
     else if ( !strcmp(s, "silo") )
+    {
         xsm_bootparam = XSM_BOOTPARAM_SILO;
+        policy_file_required = false;
+    }
 #endif
     else
         rc = -EINVAL;
@@ -148,7 +160,7 @@ int __init xsm_multiboot_init(
 
     printk("XSM Framework v" XSM_FRAMEWORK_VERSION " initialized\n");
 
-    if ( XSM_MAGIC )
+    if ( policy_file_required && XSM_MAGIC )
     {
         ret = xsm_multiboot_policy_init(module_map, mbi, &policy_buffer,
                                         &policy_size);
@@ -176,7 +188,7 @@ int __init xsm_dt_init(void)
 
     printk("XSM Framework v" XSM_FRAMEWORK_VERSION " initialized\n");
 
-    if ( XSM_MAGIC )
+    if ( policy_file_required && XSM_MAGIC )
     {
         ret = xsm_dt_policy_init(&policy_buffer, &policy_size);
         if ( ret )
Signature · 1 line
2.20.1
#2 lore raw

PATCH v2 1/3 xsm: optimize policy loading

In reply to Daniel P. Smith

It is possible to select a few different build configurations that results in the unnecessary walking of the boot module list looking for a policy module. This specifically occurs when the flask policy is enabled but either the dummy or the SILO policy is selected as the enforcing policy. This is not ideal for configurations like hyperlaunch and dom0less when there could be a number of modules to be walked or unnecessary device tree lookups

This patch introduces the policy_file_required flag for tracking when an XSM policy module requires a policy file. Only when the policy_file_required flag is set to true will XSM search the boot modules for a policy file.

---
 xen/xsm/xsm_core.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)
xen/xsm/xsm_core.c +14 -2
index 2286a502e3..4a29ee9558 100644
@@ -55,19 +55,31 @@ static enum xsm_bootparam __initdata xsm_bootparam =
     XSM_BOOTPARAM_DUMMY;
 #endif
 
+static bool __initdata policy_file_required =
+    IS_ENABLED(CONFIG_XSM_FLASK_DEFAULT);
+
 static int __init cf_check parse_xsm_param(const char *s)
 {
     int rc = 0;
 
     if ( !strcmp(s, "dummy") )
+    {
         xsm_bootparam = XSM_BOOTPARAM_DUMMY;
+        policy_file_required = false;
+    }
 #ifdef CONFIG_XSM_FLASK
     else if ( !strcmp(s, "flask") )
+    {
         xsm_bootparam = XSM_BOOTPARAM_FLASK;
+        policy_file_required = true;
+    }
 #endif
 #ifdef CONFIG_XSM_SILO
     else if ( !strcmp(s, "silo") )
+    {
         xsm_bootparam = XSM_BOOTPARAM_SILO;
+        policy_file_required = false;
+    }
 #endif
     else
         rc = -EINVAL;
@@ -148,7 +160,7 @@ int __init xsm_multiboot_init(
 
     printk("XSM Framework v" XSM_FRAMEWORK_VERSION " initialized\n");
 
-    if ( XSM_MAGIC )
+    if ( policy_file_required && XSM_MAGIC )
     {
         ret = xsm_multiboot_policy_init(module_map, mbi, &policy_buffer,
                                         &policy_size);
@@ -176,7 +188,7 @@ int __init xsm_dt_init(void)
 
     printk("XSM Framework v" XSM_FRAMEWORK_VERSION " initialized\n");
 
-    if ( XSM_MAGIC )
+    if ( policy_file_required && XSM_MAGIC )
     {
         ret = xsm_dt_policy_init(&policy_buffer, &policy_size);
         if ( ret )
Signature · 1 line
2.20.1
#3 lore raw

PATCH v2 2/3 xsm: consolidate loading the policy buffer

In reply to Daniel P. Smith

Previously, initializing the policy buffer was split between two functions, xsm_{multiboot,dt}_policy_init() and xsm_core_init(). The latter for loading the policy from boot modules and the former for falling back to built-in policy.

This patch moves all policy buffer initialization logic under the xsm_{multiboot,dt}_policy_init() functions. It then ensures that an error message is printed for every error condition that may occur in the functions. With all policy buffer init contained and only called when the policy buffer must be populated, the respective xsm_{mb,dt}_init() functions will panic if an error occurs attempting to populate the policy buffer.

---
 xen/include/xsm/xsm.h |  2 +-
 xen/xsm/xsm_core.c    | 18 +++---------------
 xen/xsm/xsm_policy.c  | 31 +++++++++++++++++++++++++++----
 3 files changed, 31 insertions(+), 20 deletions(-)
xen/include/xsm/xsm.h +1 -1
index 3e2b7fe3db..1676c261c9 100644
@@ -775,7 +775,7 @@ int xsm_multiboot_init(
     unsigned long *module_map, const multiboot_info_t *mbi);
 int xsm_multiboot_policy_init(
     unsigned long *module_map, const multiboot_info_t *mbi,
-    void **policy_buffer, size_t *policy_size);
+    const unsigned char *policy_buffer[], size_t *policy_size);
 #endif
 
 #ifdef CONFIG_HAS_DEVICE_TREE
xen/xsm/xsm_core.c +3 -15
index 4a29ee9558..8f6c3de8a6 100644
@@ -92,14 +92,6 @@ static int __init xsm_core_init(const void *policy_buffer, size_t policy_size)
 {
     const struct xsm_ops *ops = NULL;
 
-#ifdef CONFIG_XSM_FLASK_POLICY
-    if ( policy_size == 0 )
-    {
-        policy_buffer = xsm_flask_init_policy;
-        policy_size = xsm_flask_init_policy_size;
-    }
-#endif
-
     if ( xsm_ops_registered != XSM_OPS_UNREGISTERED )
     {
         printk(XENLOG_ERR
@@ -155,7 +147,7 @@ int __init xsm_multiboot_init(
     unsigned long *module_map, const multiboot_info_t *mbi)
 {
     int ret = 0;
-    void *policy_buffer = NULL;
+    const unsigned char *policy_buffer;
     size_t policy_size = 0;
 
     printk("XSM Framework v" XSM_FRAMEWORK_VERSION " initialized\n");
@@ -167,8 +159,7 @@ int __init xsm_multiboot_init(
         if ( ret )
         {
             bootstrap_map(NULL);
-            printk(XENLOG_ERR "Error %d initializing XSM policy\n", ret);
-            return -EINVAL;
+            panic(XENLOG_ERR "Error %d initializing XSM policy\n", ret);
         }
     }
 
@@ -192,10 +183,7 @@ int __init xsm_dt_init(void)
     {
         ret = xsm_dt_policy_init(&policy_buffer, &policy_size);
         if ( ret )
-        {
-            printk(XENLOG_ERR "Error %d initializing XSM policy\n", ret);
-            return -EINVAL;
-        }
+            panic(XENLOG_ERR "Error %d initializing XSM policy\n", ret);
     }
 
     ret = xsm_core_init(policy_buffer, policy_size);
xen/xsm/xsm_policy.c +27 -4
index 8dafbc9381..6a4f769aec 100644
@@ -8,7 +8,7 @@
  *  Contributors:
  *  Michael LeMay, <[email protected]>
  *  George Coker, <[email protected]>
- *  
+ *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License version 2,
  *  as published by the Free Software Foundation.
@@ -32,14 +32,21 @@
 #ifdef CONFIG_MULTIBOOT
 int __init xsm_multiboot_policy_init(
     unsigned long *module_map, const multiboot_info_t *mbi,
-    void **policy_buffer, size_t *policy_size)
+    const unsigned char *policy_buffer[], size_t *policy_size)
 {
     int i;
     module_t *mod = (module_t *)__va(mbi->mods_addr);
-    int rc = 0;
+    int rc = -ENOENT;
     u32 *_policy_start;
     unsigned long _policy_len;
 
+#ifdef CONFIG_XSM_FLASK_POLICY
+    /* Initially set to builtin policy, overriden if boot module is found. */
+    *policy_buffer = xsm_flask_init_policy;
+    *policy_size = xsm_flask_init_policy_size;
+    rc = 0;
+#endif
+
     /*
      * Try all modules and see whichever could be the binary policy.
      * Adjust module_map for the module that is the binary policy.
@@ -54,13 +61,14 @@ int __init xsm_multiboot_policy_init(
 
         if ( (xsm_magic_t)(*_policy_start) == XSM_MAGIC )
         {
-            *policy_buffer = _policy_start;
+            *policy_buffer = (unsigned char *)_policy_start;
             *policy_size = _policy_len;
 
             printk("Policy len %#lx, start at %p.\n",
                    _policy_len,_policy_start);
 
             __clear_bit(i, module_map);
+            rc = 0;
             break;
 
         }
@@ -68,6 +76,9 @@ int __init xsm_multiboot_policy_init(
         bootstrap_map(NULL);
     }
 
+    if ( rc == -ENOENT )
+        printk(XENLOG_ERR "xsm: Unable to locate policy file\n");
+
     return rc;
 }
 #endif
@@ -79,7 +90,16 @@ int __init xsm_dt_policy_init(void **policy_buffer, size_t *policy_size)
     paddr_t paddr, len;
 
     if ( !mod || !mod->size )
+    {
+#ifdef CONFIG_XSM_FLASK_POLICY
+        *policy_buffer = (void *)xsm_flask_init_policy;
+        *policy_size = xsm_flask_init_policy_size;
         return 0;
+#else
+        printk(XENLOG_ERR "xsm: Unable to locate policy file\n");
+        return -ENOENT;
+#endif
+    }
 
     paddr = mod->start;
     len = mod->size;
@@ -95,7 +115,10 @@ int __init xsm_dt_policy_init(void **policy_buffer, size_t *policy_size)
 
     *policy_buffer = xmalloc_bytes(len);
     if ( !*policy_buffer )
+    {
+        printk(XENLOG_ERR "xsm: Unable to allocate memory for XSM policy\n");
         return -ENOMEM;
+    }
 
     copy_from_paddr(*policy_buffer, paddr, len);
     *policy_size = len;
Signature · 1 line
2.20.1
#4 lore raw

PATCH v2 2/3 xsm: refactor policy loading

In reply to Daniel P. Smith

Previously initializing the policy buffer was split between two functions, xsm_{multiboot,dt}_policy_init() and xsm_core_init(). The latter for loading the policy from boot modules and the former for falling back to built-in policy.

This patch moves all policy buffer initialization logic under the xsm_{multiboot,dt}_policy_init() functions. It then ensures that an error message is printed for every error condition that may occur in the functions. With all policy buffer init contained and only called when the policy buffer must be populated, the respective xsm_{mb,dt}_init() functions will panic if an error occurs attempting to populate the policy buffer.

---
 xen/include/xsm/xsm.h |  2 +-
 xen/xsm/xsm_core.c    | 18 +++---------------
 xen/xsm/xsm_policy.c  | 31 +++++++++++++++++++++++++++----
 3 files changed, 31 insertions(+), 20 deletions(-)
xen/include/xsm/xsm.h +1 -1
index 3e2b7fe3db..1676c261c9 100644
@@ -775,7 +775,7 @@ int xsm_multiboot_init(
     unsigned long *module_map, const multiboot_info_t *mbi);
 int xsm_multiboot_policy_init(
     unsigned long *module_map, const multiboot_info_t *mbi,
-    void **policy_buffer, size_t *policy_size);
+    const unsigned char *policy_buffer[], size_t *policy_size);
 #endif
 
 #ifdef CONFIG_HAS_DEVICE_TREE
xen/xsm/xsm_core.c +3 -15
index 4a29ee9558..8f6c3de8a6 100644
@@ -92,14 +92,6 @@ static int __init xsm_core_init(const void *policy_buffer, size_t policy_size)
 {
     const struct xsm_ops *ops = NULL;
 
-#ifdef CONFIG_XSM_FLASK_POLICY
-    if ( policy_size == 0 )
-    {
-        policy_buffer = xsm_flask_init_policy;
-        policy_size = xsm_flask_init_policy_size;
-    }
-#endif
-
     if ( xsm_ops_registered != XSM_OPS_UNREGISTERED )
     {
         printk(XENLOG_ERR
@@ -155,7 +147,7 @@ int __init xsm_multiboot_init(
     unsigned long *module_map, const multiboot_info_t *mbi)
 {
     int ret = 0;
-    void *policy_buffer = NULL;
+    const unsigned char *policy_buffer;
     size_t policy_size = 0;
 
     printk("XSM Framework v" XSM_FRAMEWORK_VERSION " initialized\n");
@@ -167,8 +159,7 @@ int __init xsm_multiboot_init(
         if ( ret )
         {
             bootstrap_map(NULL);
-            printk(XENLOG_ERR "Error %d initializing XSM policy\n", ret);
-            return -EINVAL;
+            panic(XENLOG_ERR "Error %d initializing XSM policy\n", ret);
         }
     }
 
@@ -192,10 +183,7 @@ int __init xsm_dt_init(void)
     {
         ret = xsm_dt_policy_init(&policy_buffer, &policy_size);
         if ( ret )
-        {
-            printk(XENLOG_ERR "Error %d initializing XSM policy\n", ret);
-            return -EINVAL;
-        }
+            panic(XENLOG_ERR "Error %d initializing XSM policy\n", ret);
     }
 
     ret = xsm_core_init(policy_buffer, policy_size);
xen/xsm/xsm_policy.c +27 -4
index 8dafbc9381..6a4f769aec 100644
@@ -8,7 +8,7 @@
  *  Contributors:
  *  Michael LeMay, <[email protected]>
  *  George Coker, <[email protected]>
- *  
+ *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License version 2,
  *  as published by the Free Software Foundation.
@@ -32,14 +32,21 @@
 #ifdef CONFIG_MULTIBOOT
 int __init xsm_multiboot_policy_init(
     unsigned long *module_map, const multiboot_info_t *mbi,
-    void **policy_buffer, size_t *policy_size)
+    const unsigned char *policy_buffer[], size_t *policy_size)
 {
     int i;
     module_t *mod = (module_t *)__va(mbi->mods_addr);
-    int rc = 0;
+    int rc = -ENOENT;
     u32 *_policy_start;
     unsigned long _policy_len;
 
+#ifdef CONFIG_XSM_FLASK_POLICY
+    /* Initially set to builtin policy, overriden if boot module is found. */
+    *policy_buffer = xsm_flask_init_policy;
+    *policy_size = xsm_flask_init_policy_size;
+    rc = 0;
+#endif
+
     /*
      * Try all modules and see whichever could be the binary policy.
      * Adjust module_map for the module that is the binary policy.
@@ -54,13 +61,14 @@ int __init xsm_multiboot_policy_init(
 
         if ( (xsm_magic_t)(*_policy_start) == XSM_MAGIC )
         {
-            *policy_buffer = _policy_start;
+            *policy_buffer = (unsigned char *)_policy_start;
             *policy_size = _policy_len;
 
             printk("Policy len %#lx, start at %p.\n",
                    _policy_len,_policy_start);
 
             __clear_bit(i, module_map);
+            rc = 0;
             break;
 
         }
@@ -68,6 +76,9 @@ int __init xsm_multiboot_policy_init(
         bootstrap_map(NULL);
     }
 
+    if ( rc == -ENOENT )
+        printk(XENLOG_ERR "xsm: Unable to locate policy file\n");
+
     return rc;
 }
 #endif
@@ -79,7 +90,16 @@ int __init xsm_dt_policy_init(void **policy_buffer, size_t *policy_size)
     paddr_t paddr, len;
 
     if ( !mod || !mod->size )
+    {
+#ifdef CONFIG_XSM_FLASK_POLICY
+        *policy_buffer = (void *)xsm_flask_init_policy;
+        *policy_size = xsm_flask_init_policy_size;
         return 0;
+#else
+        printk(XENLOG_ERR "xsm: Unable to locate policy file\n");
+        return -ENOENT;
+#endif
+    }
 
     paddr = mod->start;
     len = mod->size;
@@ -95,7 +115,10 @@ int __init xsm_dt_policy_init(void **policy_buffer, size_t *policy_size)
 
     *policy_buffer = xmalloc_bytes(len);
     if ( !*policy_buffer )
+    {
+        printk(XENLOG_ERR "xsm: Unable to allocate memory for XSM policy\n");
         return -ENOMEM;
+    }
 
     copy_from_paddr(*policy_buffer, paddr, len);
     *policy_size = len;
Signature · 1 line
2.20.1
#5 lore raw

PATCH v2 3/3 xsm: properly handle error from XSM init

In reply to Daniel P. Smith

This commit is to move towards providing a uniform interface across architectures to initialize the XSM framework. Specifically, it provides a common handling of initialization failure by providing the printing of a warning message.

For Arm, xsm_dt_init() was tailored to have an Arm specific expansion of the return values. This expansion added a value to reflect whether the security supported XSM policy module was the enforcing policy module. This was then used to determine if a warning message would be printed. Despite this expansion, like x86, Arm does not address any XSM initialization errors that may have occurred.

---
 xen/arch/arm/setup.c | 10 +++++-----
 xen/arch/x86/setup.c |  9 +++++++--
 xen/xsm/xsm_core.c   | 22 +++++++++++-----------
 3 files changed, 23 insertions(+), 18 deletions(-)
xen/arch/arm/setup.c +5 -5
index ea1f5ee3d3..6bf71e1064 100644
@@ -967,11 +967,11 @@ void __init start_xen(unsigned long boot_phys_offset,
 
     tasklet_subsys_init();
 
-    if ( xsm_dt_init() != 1 )
-        warning_add("WARNING: SILO mode is not enabled.\n"
-                    "It has implications on the security of the system,\n"
-                    "unless the communications have been forbidden between\n"
-                    "untrusted domains.\n");
+    if ( xsm_dt_init() )
+        warning_add("WARNING: XSM failed to initialize.\n"
+                    "This has implications on the security of the system,\n"
+                    "as uncontrolled communications between trusted and\n"
+                    "untrusted domains may occur.\n");
 
     init_maintenance_interrupt();
     init_timer_interrupt();
xen/arch/x86/setup.c +7 -2
index 53a73010e0..ed67b50c9d 100644
@@ -24,6 +24,7 @@
 #include <xen/pfn.h>
 #include <xen/nodemask.h>
 #include <xen/virtual_region.h>
+#include <xen/warning.h>
 #include <xen/watchdog.h>
 #include <public/version.h>
 #ifdef CONFIG_COMPAT
@@ -1690,7 +1691,7 @@ void __init noreturn __start_xen(unsigned long mbi_p)
 
     open_softirq(NEW_TLBFLUSH_CLOCK_PERIOD_SOFTIRQ, new_tlbflush_clock_period);
 
-    if ( opt_watchdog ) 
+    if ( opt_watchdog )
         nmi_watchdog = NMI_LOCAL_APIC;
 
     find_smp_config();
@@ -1700,7 +1701,11 @@ void __init noreturn __start_xen(unsigned long mbi_p)
     mmio_ro_ranges = rangeset_new(NULL, "r/o mmio ranges",
                                   RANGESETF_prettyprint_hex);
 
-    xsm_multiboot_init(module_map, mbi);
+    if ( xsm_multiboot_init(module_map, mbi) )
+        warning_add("WARNING: XSM failed to initialize.\n"
+                    "This has implications on the security of the system,\n"
+                    "as uncontrolled communications between trusted and\n"
+                    "untrusted domains may occur.\n");
 
     /*
      * IOMMU-related ACPI table parsing may require some of the system domains
xen/xsm/xsm_core.c +11 -11
index 8f6c3de8a6..6377895e1e 100644
@@ -10,23 +10,17 @@
  *  as published by the Free Software Foundation.
  */
 
-#include <xen/init.h>
 #include <xen/errno.h>
+#include <xen/hypercall.h>
+#include <xen/init.h>
 #include <xen/lib.h>
 #include <xen/param.h>
-
-#include <xen/hypercall.h>
+#include <xen/warning.h>
 #include <xsm/xsm.h>
 
-#ifdef CONFIG_XSM
-
-#ifdef CONFIG_MULTIBOOT
 #include <asm/setup.h>
-#endif
 
-#ifdef CONFIG_HAS_DEVICE_TREE
-#include <asm/setup.h>
-#endif
+#ifdef CONFIG_XSM
 
 #define XSM_FRAMEWORK_VERSION    "1.0.1"
 
@@ -190,7 +184,13 @@ int __init xsm_dt_init(void)
 
     xfree(policy_buffer);
 
-    return ret ?: (xsm_bootparam == XSM_BOOTPARAM_SILO);
+    if ( xsm_bootparam != XSM_BOOTPARAM_SILO )
+        warning_add("WARNING: SILO mode is not enabled.\n"
+                    "It has implications on the security of the system,\n"
+                    "unless the communications have been forbidden between\n"
+                    "untrusted domains.\n");
+
+    return ret;
 }
 
 /**
Signature · 1 line
2.20.1
Reviewed-by on v2 3/3
#6 lore raw

Re: [v2 3/3] xsm: properly handle error from XSM init

Hi Daniel,

Quoted 7 lines · Daniel P. Smith

This commit is to move towards providing a uniform interface across architectures to initialize the XSM framework. Specifically, it provides a common handling of initialization failure by providing the printing of a warning message.

Quoted 8 lines

For Arm, xsm_dt_init() was tailored to have an Arm specific expansion of the return values. This expansion added a value to reflect whether the security supported XSM policy module was the enforcing policy module. This was then used to determine if a warning message would be printed. Despite this expansion, like x86, Arm does not address any XSM initialization errors that may have occurred.

For the arm part:

Cheers
Bertrand

#7 lore raw
In reply to Daniel P. Smith
Quoted 13 lines · Daniel P. Smith

This series was born out of some cleanup work done while crafting the hyperlaunch boot modules patch series. The primary purpose of this series was to stop walking all boot modules when it was not necessary, but the scope creeped during review.

Changes in v2:
* changed init_policy to policy_file_required
* split the patch into a series
* corrected casting of policy buffer
* use IS_ENABLED() instead of #ifdef sequence
* moved #ifdef inside of braces for xsm_dt_policy_init()
* addressed lack of error handling of xsm{mb,dt}_init()

Quoted 4 lines

Daniel P. Smith (3):
xsm: only search for a policy file when needed
xsm: consolidate loading the policy buffer
xsm: properly handle error from XSM init

The thread consists of 5 follow-ups, including two different 1/3 and two different 2/3. This wants sorting and then perhaps (properly) resending.

Jan

#8 lore raw
Quoted 14 lines · Jan Beulich
Quoted 13 lines · Daniel P. Smith

This series was born out of some cleanup work done while crafting the hyperlaunch boot modules patch series. The primary purpose of this series was to stop walking all boot modules when it was not necessary, but the scope creeped during review.

Changes in v2:
* changed init_policy to policy_file_required
* split the patch into a series
* corrected casting of policy buffer
* use IS_ENABLED() instead of #ifdef sequence
* moved #ifdef inside of braces for xsm_dt_policy_init()
* addressed lack of error handling of xsm{mb,dt}_init()

Quoted 7 lines
Quoted 4 lines

Daniel P. Smith (3):
xsm: only search for a policy file when needed
xsm: consolidate loading the policy buffer
xsm: properly handle error from XSM init

The thread consists of 5 follow-ups, including two different 1/3 and two different 2/3. This wants sorting and then perhaps (properly) resending.

Yep, looks like I had stray copies from an internal review spin. My apologies. Will resend clean version.

v/r,
dps