Skip to contentSkip to conversation

arm64: dts: Add i.MX8DXL initial support

PATCH Applied Abel Vesa 5 participants 18 messages Jun 7, 2022 – Oct 12, 2022

Subsystems (7)
lore
Share & tools
lore

Abel Vesa

author
#0 lore raw

v9 cover arm64: dts: Add i.MX8DXL initial support

Changes since v8:
* addressed all comments from Krzysztof
* documented scu ocotp and pd in the yaml [1]
* added Rob's A-b tag to evk binding doc patch

This patchset relies on the following patchset:
[1] https://lore.kernel.org/all/[email protected]/raw

Abel Vesa (8):
arm64: dts: freescale: Add adma subsystem dtsi for imx8dxl
dt-bindings: arm: Document i.MX8DXL EVK board binding
dt-bindings: net: fec: Add i.MX8DXL compatible string
dt-bindings: phy: mxs-usb-phy: Add i.MX8DXL compatible string
dt-bindings: usb: ci-hdrc-usb2: Add i.MX8DXL compatible string
dt-bindings: usb: usbmisc-imx: Add i.MX8DXL compatible string
dt-bindings: arm: freescale: scu-ocotp: Add i.MX8DXL compatible string
dt-bindings: arm: freescale: scu-pd: Add i.MX8DXL compatible string

Jacky Bai (4):
arm64: dts: freescale: Add the imx8dxl connectivity subsys dtsi
arm64: dts: freescale: Add ddr subsys dtsi for imx8dxl
arm64: dts: freescale: Add lsio subsys dtsi for imx8dxl
arm64: dts: freescale: Add the top level dtsi support for imx8dxl

 .../bindings/arm/freescale/fsl,scu-ocotp.yaml |   2 +
 .../bindings/arm/freescale/fsl,scu-pd.yaml    |   1 +
 .../devicetree/bindings/arm/fsl.yaml          |   6 +
 .../devicetree/bindings/net/fsl,fec.yaml      |   4 +
 .../devicetree/bindings/phy/mxs-usb-phy.txt   |   1 +
 .../devicetree/bindings/usb/ci-hdrc-usb2.txt  |   1 +
 .../devicetree/bindings/usb/usbmisc-imx.txt   |   1 +
 .../boot/dts/freescale/imx8dxl-ss-adma.dtsi   |  52 ++++
 .../boot/dts/freescale/imx8dxl-ss-conn.dtsi   | 134 ++++++++++
 .../boot/dts/freescale/imx8dxl-ss-ddr.dtsi    |  37 +++
 .../boot/dts/freescale/imx8dxl-ss-lsio.dtsi   |  78 ++++++
 arch/arm64/boot/dts/freescale/imx8dxl.dtsi    | 241 ++++++++++++++++++
 12 files changed, 558 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl.dtsi

--
2.34.3

author
#1 lore raw

PATCH v9 1/12 arm64: dts: freescale: Add adma subsystem dtsi for imx8dxl

Override the I2Cs, LPUARTs, audio_ipg_clk and dma_ipg_clk with the i.MX8DXL specific properties.

---
 .../boot/dts/freescale/imx8dxl-ss-adma.dtsi   | 52 +++++++++++++++++++
 1 file changed, 52 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi
arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi new file +52 -0
new file mode 100644
index 000000000000..4d0c75bad74c
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019-2021 NXP
+ */
+
+&audio_ipg_clk {
+	clock-frequency = <160000000>;
+};
+
+&dma_ipg_clk {
+	clock-frequency = <160000000>;
+};
+
+&i2c0 {
+	compatible = "fsl,imx8dxl-lpi2c", "fsl,imx7ulp-lpi2c";
+	interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&i2c1 {
+	compatible = "fsl,imx8dxl-lpi2c", "fsl,imx7ulp-lpi2c";
+	interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&i2c2 {
+	compatible = "fsl,imx8dxl-lpi2c", "fsl,imx7ulp-lpi2c";
+	interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&i2c3 {
+	compatible = "fsl,imx8dxl-lpi2c", "fsl,imx7ulp-lpi2c";
+	interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpuart0 {
+	compatible = "fsl,imx8dxl-lpuart", "fsl,imx8qxp-lpuart";
+	interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpuart1 {
+	compatible = "fsl,imx8dxl-lpuart", "fsl,imx8qxp-lpuart";
+	interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpuart2 {
+	compatible = "fsl,imx8dxl-lpuart", "fsl,imx8qxp-lpuart";
+	interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpuart3 {
+	compatible = "fsl,imx8dxl-lpuart", "fsl,imx8qxp-lpuart";
+	interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+};
Signature · 1 line
2.34.3
author
#2 lore raw

PATCH v9 2/12 arm64: dts: freescale: Add the imx8dxl connectivity subsys dtsi

In reply to Abel Vesa

From: Jacky Bai <[email protected]>

On i.MX8DXL, the Connectivity subsystem includes below peripherals:
1x ENET with AVB support, 1x ENET with TSN support, 2x USB OTG, 1x eMMC, 2x SD, 1x NAND.

---
 .../boot/dts/freescale/imx8dxl-ss-conn.dtsi   | 134 ++++++++++++++++++
 1 file changed, 134 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi new file +134 -0
new file mode 100644
index 000000000000..d10d1bf76df7
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019-2021 NXP
+ */
+
+/delete-node/ &enet1_lpcg;
+/delete-node/ &fec2;
+
+&conn_subsys {
+	conn_enet0_root_clk: clock-conn-enet0-root@0 {
+		compatible = "fixed-clock";
+		reg = <0 0>;
+		#clock-cells = <0>;
+		clock-frequency = <250000000>;
+		clock-output-names = "conn_enet0_root_clk";
+	};
+
+	eqos: ethernet@5b050000 {
+		compatible = "nxp,imx8dxl-dwmac-eqos", "snps,dwmac-5.10a";
+		reg = <0x5b050000 0x10000>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "eth_wake_irq", "macirq";
+		clocks = <&eqos_lpcg IMX_LPCG_CLK_2>,
+			 <&eqos_lpcg IMX_LPCG_CLK_4>,
+			 <&eqos_lpcg IMX_LPCG_CLK_0>,
+			 <&eqos_lpcg IMX_LPCG_CLK_3>,
+			 <&eqos_lpcg IMX_LPCG_CLK_1>;
+		clock-names = "stmmaceth", "pclk", "ptp_ref", "tx", "mem";
+		assigned-clocks = <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <125000000>;
+		power-domains = <&pd IMX_SC_R_ENET_1>;
+		status = "disabled";
+	};
+
+	usbotg2: usb@5b0e0000 {
+		compatible = "fsl,imx8dxl-usb", "fsl,imx7ulp-usb";
+		reg = <0x5b0e0000 0x200>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,usbphy = <&usbphy2>;
+		fsl,usbmisc = <&usbmisc2 0>;
+		/*
+		 * usbotg1 and usbotg2 share one clock
+		 * scfw disable clock access and keep it always on
+		 * in case other core (M4) use one of these.
+		 */
+		clocks = <&clk_dummy>;
+		ahb-burst-config = <0x0>;
+		tx-burst-size-dword = <0x10>;
+		rx-burst-size-dword = <0x10>;
+		power-domains = <&pd IMX_SC_R_USB_1>;
+		status = "disabled";
+	};
+
+	usbmisc2: usb@5b0e0200 {
+		#index-cells = <1>;
+		compatible = "fsl,imx8dxl-usbmisc", "fsl,imx7ulp-usbmisc";
+		reg = <0x5b0e0200 0x200>;
+	};
+
+	usbphy2: phy@5b110000 {
+		compatible = "fsl,imx8dxl-usbphy", "fsl,imx7ulp-usbphy";
+		reg = <0x5b110000 0x1000>;
+		clocks = <&usb2_2_lpcg IMX_LPCG_CLK_7>;
+		status = "disabled";
+	};
+
+	eqos_lpcg: clock-controller@5b240000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5b240000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&conn_enet0_root_clk>,
+			 <&conn_axi_clk>,
+			 <&conn_axi_clk>,
+			 <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>,
+			 <&conn_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>,
+				<IMX_LPCG_CLK_2>,
+				<IMX_LPCG_CLK_4>,
+				<IMX_LPCG_CLK_5>,
+				<IMX_LPCG_CLK_6>;
+		clock-output-names = "eqos_ptp",
+				     "eqos_mem_clk",
+				     "eqos_aclk",
+				     "eqos_clk",
+				     "eqos_csr_clk";
+		power-domains = <&pd IMX_SC_R_ENET_1>;
+	};
+
+	usb2_2_lpcg: clock-controller@5b280000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5b280000 0x10000>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_7>;
+		clocks = <&conn_ipg_clk>;
+		clock-output-names = "usboh3_2_phy_ipg_clk";
+	};
+};
+
+&enet0_lpcg {
+	clocks = <&conn_enet0_root_clk>,
+		 <&conn_enet0_root_clk>,
+		 <&conn_axi_clk>,
+		 <&clk IMX_SC_R_ENET_0 IMX_SC_C_TXCLK>,
+		 <&conn_ipg_clk>,
+		 <&conn_ipg_clk>;
+};
+
+&fec1 {
+	compatible = "fsl,imx8dxl-fec", "fsl,imx8qm-fec";
+	interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+	assigned-clocks = <&clk IMX_SC_R_ENET_0 IMX_SC_C_CLKDIV>;
+	assigned-clock-rates = <125000000>;
+};
+
+&usdhc1 {
+	compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc";
+	interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usdhc2 {
+	compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc";
+	interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usdhc3 {
+	compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc";
+	interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+};
Signature · 1 line
2.34.3
author
#3 lore raw

PATCH v9 3/12 arm64: dts: freescale: Add ddr subsys dtsi for imx8dxl

In reply to Abel Vesa

From: Jacky Bai <[email protected]>

Add the ddr subsys dtsi for i.MX8DXL. Additional db pmu is added compared to i.MX8QXP.

---
 .../boot/dts/freescale/imx8dxl-ss-ddr.dtsi    | 37 +++++++++++++++++++
 1 file changed, 37 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi
arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi new file +37 -0
new file mode 100644
index 000000000000..8a91eb33b4ef
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021 NXP
+ */
+
+&ddr_subsys {
+	db_ipg_clk: clock-db-ipg@0 {
+		compatible = "fixed-clock";
+		reg = <0 0>;
+		#clock-cells = <0>;
+		clock-frequency = <456000000>;
+		clock-output-names = "db_ipg_clk";
+	};
+
+	db_pmu0: db-pmu@5ca40000 {
+		compatible = "fsl,imx8dxl-db-pmu";
+		reg = <0x5ca40000 0x10000>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&db_pmu0_lpcg IMX_LPCG_CLK_0>,
+			 <&db_pmu0_lpcg IMX_LPCG_CLK_1>;
+		clock-names = "ipg", "cnt";
+		power-domains = <&pd IMX_SC_R_PERF>;
+	};
+
+	db_pmu0_lpcg: clock-controller@5cae0000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5cae0000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&db_ipg_clk>, <&db_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>,
+				<IMX_LPCG_CLK_1>;
+		clock-output-names = "perf_lpcg_cnt_clk",
+				     "perf_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_PERF>;
+	};
+};
Signature · 1 line
2.34.3
author
#4 lore raw

PATCH v9 4/12 arm64: dts: freescale: Add lsio subsys dtsi for imx8dxl

In reply to Abel Vesa

From: Jacky Bai <[email protected]>

On i.MX8DXL, the LSIO subsystem includes below devices:

1x Inline Encryption Engine (IEE)
1x FlexSPI
4x Pulse Width Modulator (PWM)
5x General Purpose Timer (GPT)
8x GPIO
14x Message Unit (MU)
256KB On-Chip Memory (OCRAM)

compared to the common imx8-ss-lsio dtsi, some nodes' interrupt property need to be updated.

---
 .../boot/dts/freescale/imx8dxl-ss-lsio.dtsi   | 78 +++++++++++++++++++
 1 file changed, 78 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi
arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi new file +78 -0
new file mode 100644
index 000000000000..6aec2ec3a848
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019-2021 NXP
+ */
+&lsio_gpio0 {
+	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+	interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_gpio1 {
+	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+	interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_gpio2 {
+	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+	interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_gpio3 {
+	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+	interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_gpio4 {
+	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+	interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_gpio5 {
+	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+	interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_gpio6 {
+	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+	interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_gpio7 {
+	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+	interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_mu0 {
+	compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+	interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_mu1 {
+	compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+	interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_mu2 {
+	compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+	interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_mu3 {
+	compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+	interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_mu4 {
+	compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+	interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_mu5 {
+	compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+	interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_mu13 {
+	compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+	interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+};
Signature · 1 line
2.34.3
author
#5 lore raw

PATCH v9 5/12 arm64: dts: freescale: Add the top level dtsi support for imx8dxl

In reply to Abel Vesa

From: Jacky Bai <[email protected]>

The i.MX8DXL is a device targeting the automotive and industrial market segments. The flexibility of the architecture allows for use in a wide variety of general embedded applications. The chip is designed to achieve both high performance and low power consumption. The chip relies on the power efficient dual (2x) Cortex-A35 cluster.

Add the reserved memory node property for dsp reserved memory, the wakeup-irq property for SCU node, the rpmsg and the cm4 rproc support.

---
 arch/arm64/boot/dts/freescale/imx8dxl.dtsi | 241 +++++++++++++++++++++
 1 file changed, 241 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl.dtsi
arch/arm64/boot/dts/freescale/imx8dxl.dtsi new file +241 -0
new file mode 100644
index 000000000000..6ed5f42b6f05
@@ -0,0 +1,241 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019-2021 NXP
+ */
+
+#include <dt-bindings/clock/imx8-clock.h>
+#include <dt-bindings/firmware/imx/rsrc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/pads-imx8dxl.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &fec1;
+		ethernet1 = &eqos;
+		gpio0 = &lsio_gpio0;
+		gpio1 = &lsio_gpio1;
+		gpio2 = &lsio_gpio2;
+		gpio3 = &lsio_gpio3;
+		gpio4 = &lsio_gpio4;
+		gpio5 = &lsio_gpio5;
+		gpio6 = &lsio_gpio6;
+		gpio7 = &lsio_gpio7;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mu1 = &lsio_mu1;
+		serial0 = &lpuart0;
+		serial1 = &lpuart1;
+		serial2 = &lpuart2;
+		serial3 = &lpuart3;
+	};
+
+	cpus: cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		/* We have 1 cluster with 2 Cortex-A35 cores */
+		A35_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&A35_L2>;
+			clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>;
+			#cooling-cells = <2>;
+			operating-points-v2 = <&a35_opp_table>;
+		};
+
+		A35_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&A35_L2>;
+			clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>;
+			#cooling-cells = <2>;
+			operating-points-v2 = <&a35_opp_table>;
+		};
+
+		A35_L2: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	a35_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-900000000 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <150000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		dsp_reserved: dsp@92400000 {
+			reg = <0 0x92400000 0 0x2000000>;
+			no-map;
+		};
+	};
+
+	gic: interrupt-controller@51a00000 {
+		compatible = "arm,gic-v3";
+		reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */
+		      <0x0 0x51b00000 0 0xc0000>; /* GICR (RD_base + SGI_base) */
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	scu {
+		compatible = "fsl,imx-scu";
+		mbox-names = "tx0",
+			     "rx0",
+			     "gip3";
+		mboxes = <&lsio_mu1 0 0
+			  &lsio_mu1 1 0
+			  &lsio_mu1 3 3>;
+
+		pd: imx8qx-pd {
+			compatible = "fsl,imx8dxl-scu-pd", "fsl,scu-pd";
+			#power-domain-cells = <1>;
+		};
+
+		clk: clock-controller {
+			compatible = "fsl,imx8dxl-clk", "fsl,scu-clk";
+			#clock-cells = <2>;
+			clocks = <&xtal32k &xtal24m>;
+			clock-names = "xtal_32KHz", "xtal_24Mhz";
+		};
+
+		iomuxc: pinctrl {
+			compatible = "fsl,imx8dxl-iomuxc";
+		};
+
+		ocotp: imx8qx-ocotp {
+			compatible = "fsl,imx8dxl-scu-ocotp", "fsl,imx8qxp-scu-ocotp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			fec_mac0: mac@2c4 {
+				reg = <0x2c4 6>;
+			};
+
+			fec_mac1: mac@2c6 {
+				reg = <0x2c6 6>;
+			};
+		};
+
+		watchdog {
+			compatible = "fsl,imx-sc-wdt";
+			timeout-sec = <60>;
+		};
+
+		tsens: thermal-sensor {
+			compatible = "fsl,imx-sc-thermal";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */
+	};
+
+	thermal_zones: thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tsens IMX_SC_R_SYSTEM>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <107000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit0: trip1 {
+					temperature = <127000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+					<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	clk_dummy: clock-dummy {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "clk_dummy";
+	};
+
+	xtal32k: clock-xtal32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xtal_32KHz";
+	};
+
+	xtal24m: clock-xtal24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal_24MHz";
+	};
+
+	/* sorted in register address */
+	#include "imx8-ss-adma.dtsi"
+	#include "imx8-ss-conn.dtsi"
+	#include "imx8-ss-ddr.dtsi"
+	#include "imx8-ss-lsio.dtsi"
+};
+
+#include "imx8dxl-ss-adma.dtsi"
+#include "imx8dxl-ss-conn.dtsi"
+#include "imx8dxl-ss-lsio.dtsi"
+#include "imx8dxl-ss-ddr.dtsi"
Signature · 1 line
2.34.3
author
#6 lore raw

PATCH v9 6/12 dt-bindings: arm: Document i.MX8DXL EVK board binding

In reply to Abel Vesa

Document devicetree binding of i.XM8DXL EVK board.

---
 Documentation/devicetree/bindings/arm/fsl.yaml | 6 ++++++
 1 file changed, 6 insertions(+)
Documentation/devicetree/bindings/arm/fsl.yaml +6 -0
index ef524378d449..451e06a98ca2 100644
@@ -809,6 +809,12 @@ properties:
               - fsl,imx7ulp-evk           # i.MX7ULP Evaluation Kit
           - const: fsl,imx7ulp
 
+      - description: i.MX8DXL based Boards
+        items:
+          - enum:
+              - fsl,imx8dxl-evk           # i.MX8DXL Evaluation Kit
+          - const: fsl,imx8dxl
+
       - description: i.MX8MM based Boards
         items:
           - enum:
Signature · 1 line
2.34.3
author
#7 lore raw

PATCH v9 7/12 dt-bindings: net: fec: Add i.MX8DXL compatible string

In reply to Abel Vesa

Add the i.MX8DXL compatible string for FEC. It also uses "fsl,imx8qm-fec".

---
 Documentation/devicetree/bindings/net/fsl,fec.yaml | 4 ++++
 1 file changed, 4 insertions(+)
Documentation/devicetree/bindings/net/fsl,fec.yaml +4 -0
index daa2f79a294f..92654823f3dd 100644
@@ -58,6 +58,10 @@ properties:
               - fsl,imx8qxp-fec
           - const: fsl,imx8qm-fec
           - const: fsl,imx6sx-fec
+      - items:
+          - enum:
+              - fsl,imx8dxl-fec
+          - const: fsl,imx8qm-fec
 
   reg:
     maxItems: 1
Signature · 1 line
2.34.3
author
#8 lore raw

PATCH v9 8/12 dt-bindings: phy: mxs-usb-phy: Add i.MX8DXL compatible string

In reply to Abel Vesa

Add compatible for i.MX8DXL USB PHY.

---
 Documentation/devicetree/bindings/phy/mxs-usb-phy.txt | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/phy/mxs-usb-phy.txt +1 -0
index c9f5c0caf8a9..c9e392c64a7c 100644
@@ -8,6 +8,7 @@ Required properties:
 	* "fsl,vf610-usbphy" for Vybrid vf610
 	* "fsl,imx6sx-usbphy" for imx6sx
 	* "fsl,imx7ulp-usbphy" for imx7ulp
+	* "fsl,imx8dxl-usbphy" for imx8dxl
   "fsl,imx23-usbphy" is still a fallback for other strings
 - reg: Should contain registers location and length
 - interrupts: Should contain phy interrupt
Signature · 1 line
2.34.3
maintainer Applied
#9 lore raw

Re: [PATCH v9 08/12] dt-bindings: phy: mxs-usb-phy: Add i.MX8DXL compatible string

Quoted 1 line · Abel Vesa

Add compatible for i.MX8DXL USB PHY.

Applied, thanks

Quoted 27 lines
---
 Documentation/devicetree/bindings/phy/mxs-usb-phy.txt | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/phy/mxs-usb-phy.txt +1 -0
index c9f5c0caf8a9..c9e392c64a7c 100644
@@ -8,6 +8,7 @@ Required properties:
 	* "fsl,vf610-usbphy" for Vybrid vf610
 	* "fsl,imx6sx-usbphy" for imx6sx
 	* "fsl,imx7ulp-usbphy" for imx7ulp
+	* "fsl,imx8dxl-usbphy" for imx8dxl
   "fsl,imx23-usbphy" is still a fallback for other strings
 - reg: Should contain registers location and length
 - interrupts: Should contain phy interrupt
Signature · 7 lines
2.34.3


-- 
linux-phy mailing list
[email protected]
https://lists.infradead.org/mailman/listinfo/linux-phy
Signature · 1 line
~Vinod
#10 lore raw

RE: [PATCH v9 08/12] dt-bindings: phy: mxs-usb-phy: Add i.MX8DXL compatible string

Hi Vinod, Rob, Krzysztof

Quoted 7 lines

Subject: Re: [PATCH v9 08/12] dt-bindings: phy: mxs-usb-phy: Add i.MX8DXL compatible string

Quoted 1 line · Abel Vesa

Add compatible for i.MX8DXL USB PHY.

Applied, thanks

I would like to know the rule that whether such new compatible string or new property added to txt binding doc still is still ok to be accepted?

Or only fixes are accepted for txt binding?

Thanks,
Peng.

Quoted 40 lines

Review

Quoted 9 lines
---
 Documentation/devicetree/bindings/phy/mxs-usb-phy.txt | 1 +
 1 file changed, 1 insertion(+)
(quoted diff) +0 -0

b/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt

Quoted 15 lines

index c9f5c0caf8a9..c9e392c64a7c 100644

Documentation/devicetree/bindings/phy/mxs-usb-phy.txt +1 -1
@@ -8,6 +8,7 @@ Required properties:
 	* "fsl,vf610-usbphy" for Vybrid vf610
 	* "fsl,imx6sx-usbphy" for imx6sx
 	* "fsl,imx7ulp-usbphy" for imx7ulp
+	* "fsl,imx8dxl-usbphy" for imx8dxl
   "fsl,imx23-usbphy" is still a fallback for other strings
 - reg: Should contain registers location and length
 - interrupts: Should contain phy interrupt
--

2.34.3

Quoted 4 lines

--
linux-phy mailing list
[email protected]

https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.i
nfradead.org%2Fmailman%2Flistinfo%2Flinux- phy&amp;data=05%7C01%7Cpeng.fan%40nxp.com%7Cd65b54c2406f44828 a9408da496b20fd%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C6 37903021707349724%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwM DAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C% 7C&amp;sdata=fPitVfeWmcSXvD3APuxTmytkTOS8Wt3z5ExVU4Ct334%3D&a mp;reserved=0

--
~Vinod

Signature · 3 lines
linux-phy mailing list
[email protected]
https://lists.infradead.org/mailman/listinfo/linux-phy
#11 lore raw

Re: [PATCH v9 08/12] dt-bindings: phy: mxs-usb-phy: Add i.MX8DXL compatible string

Quoted 6 lines · Peng Fan

Hi Vinod, Rob, Krzysztof

Quoted 4 lines

Subject: Re: [PATCH v9 08/12] dt-bindings: phy: mxs-usb-phy: Add i.MX8DXL compatible string

On 07-06-22, 14:16, Abel Vesa wrote:

Quoted 8 lines
Quoted 3 lines
Quoted 1 line

Add compatible for i.MX8DXL USB PHY.

Applied, thanks

I would like to know the rule that whether such new compatible string or new property added to txt binding doc still is still ok to be accepted?

Or only fixes are accepted for txt binding?

Adding only compatibles is .

Best regards,
Krzysztof

author
#12 lore raw

PATCH v9 9/12 dt-bindings: usb: ci-hdrc-usb2: Add i.MX8DXL compatible string

In reply to Abel Vesa

Add i.MX8DXL compatible string to ci-hdrc-usb2 bindings documentation.

---
 Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt +1 -0
index ba51fb1252b9..49fda92aaf3c 100644
@@ -11,6 +11,7 @@ Required properties:
 	"fsl,imx6ul-usb"
 	"fsl,imx7d-usb"
 	"fsl,imx7ulp-usb"
+	"fsl,imx8dxl-usb"
 	"lsi,zevio-usb"
 	"qcom,ci-hdrc"
 	"chipidea,usb2"
Signature · 1 line
2.34.3
author
#13 lore raw

PATCH v9 10/12 dt-bindings: usb: usbmisc-imx: Add i.MX8DXL compatible string

In reply to Abel Vesa

Add i.MX8DXL compatible string to the usbmisc-imx bindings.

---
 Documentation/devicetree/bindings/usb/usbmisc-imx.txt | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/usb/usbmisc-imx.txt +1 -0
index b796836d2ce7..6bebb7071c4f 100644
@@ -8,6 +8,7 @@ Required properties:
 	"fsl,imx6sx-usbmisc" for imx6sx
 	"fsl,imx7d-usbmisc" for imx7d
 	"fsl,imx7ulp-usbmisc" for imx7ulp
+	"fsl,imx8dxl-usbmisc" for imx8dxl
 - reg: Should contain registers location and length
 
 Examples:
Signature · 1 line
2.34.3
author
#14 lore raw

PATCH v9 11/12 dt-bindings: arm: freescale: scu-ocotp: Add i.MX8DXL compatible string

In reply to Abel Vesa

Add i.MX8DXL compatible string to the scu-ocotp bindings.

---
 .../devicetree/bindings/arm/freescale/fsl,scu-ocotp.yaml        | 2 ++
 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/arm/freescale/fsl,scu-ocotp.yaml +2 -0
index 1c2d2486f366..73c9bd16ec35 100644
@@ -20,7 +20,9 @@ properties:
           - enum:
               - fsl,imx8qm-scu-ocotp
               - fsl,imx8qxp-scu-ocotp
+              - fsl,imx8dxl-scu-ocotp
       - items:
+          - const: fsl,imx8dxl-scu-ocotp
           - const: fsl,imx8qxp-scu-ocotp
 
   '#address-cells':
Signature · 1 line
2.34.3
maintainer
#15 lore raw

Re: [PATCH v9 11/12] dt-bindings: arm: freescale: scu-ocotp: Add i.MX8DXL compatible string

Quoted 6 lines · Abel Vesa

Add i.MX8DXL compatible string to the scu-ocotp bindings.

---
 .../devicetree/bindings/arm/freescale/fsl,scu-ocotp.yaml        | 2 ++
 1 file changed, 2 insertions(+)

Why are you adding this patch which adds a dependency on v9 of your series?

Documentation/devicetree/bindings/arm/freescale/fsl,scu-ocotp.yaml properties: · line 26

Quoted 13 lines
Documentation/devicetree/bindings/arm/freescale/fsl,scu-ocotp.yaml +2 -0
index 1c2d2486f366..73c9bd16ec35 100644
@@ -20,7 +20,9 @@ properties:
           - enum:
               - fsl,imx8qm-scu-ocotp
               - fsl,imx8qxp-scu-ocotp
+              - fsl,imx8dxl-scu-ocotp
       - items:
+          - const: fsl,imx8dxl-scu-ocotp
           - const: fsl,imx8qxp-scu-ocotp

This doesn't make sense. Either you have a fallback or you don't.

Quoted 6 lines
Documentation/devicetree/bindings/arm/freescale/fsl,scu-ocotp.yaml +0 -0
   '#address-cells':
Signature · 1 line
2.34.3
author
#16 lore raw

PATCH v9 12/12 dt-bindings: arm: freescale: scu-pd: Add i.MX8DXL compatible string

In reply to Abel Vesa

Add i.MX8DXL compatible string to the scu-pd bindings.

---
 Documentation/devicetree/bindings/arm/freescale/fsl,scu-pd.yaml | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/arm/freescale/fsl,scu-pd.yaml +1 -0
index 154a63495436..78d855fc4105 100644
@@ -19,6 +19,7 @@ properties:
   compatible:
     items:
       - enum:
+          - fsl,imx8dxl-scu-pd
           - fsl,imx8qm-scu-pd
           - fsl,imx8qxp-scu-pd
       - const: fsl,scu-pd
Signature · 1 line
2.34.3
maintainer Acked-by on v9 12/12
#17 lore raw

Re: [PATCH v9 12/12] dt-bindings: arm: freescale: scu-pd: Add i.MX8DXL compatible string

Quoted 7 lines · Abel Vesa

Add i.MX8DXL compatible string to the scu-pd bindings.

---
 Documentation/devicetree/bindings/arm/freescale/fsl,scu-pd.yaml | 1 +
 1 file changed, 1 insertion(+)