Skip to contentSkip to conversation

scsi: ufs: Fix PMC and low-power mode on MediaTek UFS platforms

PATCH Superseded Stanley Chu 2 participants 17 messages Jun 14, 2022 – Jun 15, 2022

Subsystems (3)

v3 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

v3 cover scsi: ufs: Fix PMC and low-power mode on MediaTek UFS platforms

Hi Martin,

This series provides some fixes on MediaTek UFS platforms, please consider this patch series for kernel v5.20.

Sorry to change this patch series so frequently since we have to post and backport these patches to Android kernel recently.

- Provide workaround for power mode change for HS-G5
- Fix and provide regulator features

Changes compared to v2:
- Add patches to support multiple VCC sources

Changes compared to v1:
- Add patches to fix and provide VCCQx low-power support

Alice Chao (1):
scsi: ufs-mediatek: Support flexible parameters for smc calls

CC Chou (1):
scsi: ufs-mediatek: Introduce workaround for power mode change

Peter Wang (1):
scsi: ufs-mediatek: Support low-power mode for VCCQ

Po-Wen Kao (2):
scsi: ufs-mediatek: Fix the timing of configuring device regulators
scsi: ufs-mediatek: Prevent device regulators setting as LPM
incorrectly

Stanley Chu (5):
scsi: ufs: Export ufshcd_uic_change_pwr_mode()
scsi: ufs: Fix ADAPT logic for HS-G5
scsi: ufs-mediatek: Support low-power mode for parents of VCCQx
scsi: ufs: Export regulator functions
scsi: ufs-mediatek: Support multiple VCC sources

 drivers/ufs/core/ufshcd.c        |   8 +-
 drivers/ufs/host/ufs-mediatek.c  | 232 ++++++++++++++++++++++++++-----
 drivers/ufs/host/ufs-mediatek.h  |  75 ++++++++++
 drivers/ufs/host/ufshcd-pltfrm.c |   3 +-
 drivers/ufs/host/ufshcd-pltfrm.h |   2 +
 include/ufs/ufshcd.h             |   3 +
 include/ufs/unipro.h             |   1 +
 7 files changed, 289 insertions(+), 35 deletions(-)
Signature · 1 line
2.18.0
#1 lore raw

PATCH v3 1/10 scsi: ufs: Export ufshcd_uic_change_pwr_mode()

Export ufshcd_uic_change_pwr_mode() to allow vendors to use it for SoC-specific power mode change design limitation.

---
 drivers/ufs/core/ufshcd.c | 3 ++-
 include/ufs/ufshcd.h      | 1 +
 2 files changed, 3 insertions(+), 1 deletion(-)
drivers/ufs/core/ufshcd.c +2 -1
index 936a6d5467c9..19e17c898319 100755
@@ -4091,7 +4091,7 @@ static int ufshcd_uic_pwr_ctrl(struct ufs_hba *hba, struct uic_command *cmd)
  *
  * Returns 0 on success, non-zero value on failure
  */
-static int ufshcd_uic_change_pwr_mode(struct ufs_hba *hba, u8 mode)
+int ufshcd_uic_change_pwr_mode(struct ufs_hba *hba, u8 mode)
 {
 	struct uic_command uic_cmd = {0};
 	int ret;
@@ -4116,6 +4116,7 @@ static int ufshcd_uic_change_pwr_mode(struct ufs_hba *hba, u8 mode)
 out:
 	return ret;
 }
+EXPORT_SYMBOL_GPL(ufshcd_uic_change_pwr_mode);
 
 int ufshcd_link_recovery(struct ufs_hba *hba)
 {
include/ufs/ufshcd.h +1 -0
index a92271421718..aa778418703f 100755
@@ -1087,6 +1087,7 @@ extern int ufshcd_dme_get_attr(struct ufs_hba *hba, u32 attr_sel,
 			       u32 *mib_val, u8 peer);
 extern int ufshcd_config_pwr_mode(struct ufs_hba *hba,
 			struct ufs_pa_layer_attr *desired_pwr_mode);
+extern int ufshcd_uic_change_pwr_mode(struct ufs_hba *hba, u8 mode);
 
 /* UIC command interfaces for DME primitives */
 #define DME_LOCAL	0
Signature · 1 line
2.18.0
#2 lore raw

PATCH v3 2/10 scsi: ufs: Fix ADAPT logic for HS-G5

In reply to Stanley Chu

ADAPT now is added not only for HS Gear4 mode but also higher gears. Fix the logic for higher gears.

---
 drivers/ufs/core/ufshcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/ufs/core/ufshcd.c +1 -1
index 19e17c898319..0d16739c67bb 100755
@@ -3802,7 +3802,7 @@ int ufshcd_dme_configure_adapt(struct ufs_hba *hba,
 {
 	int ret;
 
-	if (agreed_gear != UFS_HS_G4)
+	if (agreed_gear < UFS_HS_G4)
 		adapt_val = PA_NO_ADAPT;
 
 	ret = ufshcd_dme_set(hba,
Signature · 1 line
2.18.0
#3 lore raw

PATCH v3 3/10 scsi: ufs-mediatek: Introduce workaround for power mode change

In reply to Stanley Chu

From: CC Chou <[email protected]>

Some MediaTek SoC chips need special flow for power mode change, especially for chips supporting HS-G5.

Enable the workaround by setting the host-specific capability.

---
 drivers/ufs/host/ufs-mediatek.c | 60 +++++++++++++++++++++++++++++++--
 drivers/ufs/host/ufs-mediatek.h |  1 +
 include/ufs/unipro.h            |  1 +
 3 files changed, 60 insertions(+), 2 deletions(-)
drivers/ufs/host/ufs-mediatek.c +58 -2
index beabc3ccd30b..21d591925dc4 100755
@@ -82,6 +82,13 @@ static bool ufs_mtk_is_broken_vcc(struct ufs_hba *hba)
 	return !!(host->caps & UFS_MTK_CAP_BROKEN_VCC);
 }
 
+static bool ufs_mtk_is_pmc_via_fastauto(struct ufs_hba *hba)
+{
+	struct ufs_mtk_host *host = ufshcd_get_variant(hba);
+
+	return (host->caps & UFS_MTK_CAP_PMC_VIA_FASTAUTO);
+}
+
 static void ufs_mtk_cfg_unipro_cg(struct ufs_hba *hba, bool enable)
 {
 	u32 tmp;
@@ -579,6 +586,9 @@ static void ufs_mtk_init_host_caps(struct ufs_hba *hba)
 	if (of_property_read_bool(np, "mediatek,ufs-broken-vcc"))
 		host->caps |= UFS_MTK_CAP_BROKEN_VCC;
 
+	if (of_property_read_bool(np, "mediatek,ufs-pmc-via-fastauto"))
+		host->caps |= UFS_MTK_CAP_PMC_VIA_FASTAUTO;
+
 	dev_info(hba->dev, "caps: 0x%x", host->caps);
 }
 
@@ -754,6 +764,26 @@ static int ufs_mtk_init(struct ufs_hba *hba)
 	return err;
 }
 
+static bool ufs_mtk_pmc_via_fastauto(struct ufs_hba *hba,
+	struct ufs_pa_layer_attr *dev_req_params)
+{
+	if (!ufs_mtk_is_pmc_via_fastauto(hba))
+		return false;
+
+	if (dev_req_params->hs_rate == hba->pwr_info.hs_rate)
+		return false;
+
+	if ((dev_req_params->pwr_tx != FAST_MODE) &&
+		(dev_req_params->gear_tx < UFS_HS_G4))
+		return false;
+
+	if ((dev_req_params->pwr_rx != FAST_MODE) &&
+		(dev_req_params->gear_rx < UFS_HS_G4))
+		return false;
+
+	return true;
+}
+
 static int ufs_mtk_pre_pwr_change(struct ufs_hba *hba,
 				  struct ufs_pa_layer_attr *dev_max_params,
 				  struct ufs_pa_layer_attr *dev_req_params)
@@ -763,8 +793,8 @@ static int ufs_mtk_pre_pwr_change(struct ufs_hba *hba,
 	int ret;
 
 	ufshcd_init_pwr_dev_param(&host_cap);
-	host_cap.hs_rx_gear = UFS_HS_G4;
-	host_cap.hs_tx_gear = UFS_HS_G4;
+	host_cap.hs_rx_gear = UFS_HS_G5;
+	host_cap.hs_tx_gear = UFS_HS_G5;
 
 	ret = ufshcd_get_pwr_dev_param(&host_cap,
 				       dev_max_params,
@@ -774,6 +804,32 @@ static int ufs_mtk_pre_pwr_change(struct ufs_hba *hba,
 			__func__);
 	}
 
+	if (ufs_mtk_pmc_via_fastauto(hba, dev_req_params)) {
+		ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXTERMINATION), true);
+		ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXGEAR), UFS_HS_G1);
+
+		ufshcd_dme_set(hba, UIC_ARG_MIB(PA_RXTERMINATION), true);
+		ufshcd_dme_set(hba, UIC_ARG_MIB(PA_RXGEAR), UFS_HS_G1);
+
+		ufshcd_dme_set(hba, UIC_ARG_MIB(PA_ACTIVETXDATALANES),
+						dev_req_params->lane_tx);
+		ufshcd_dme_set(hba, UIC_ARG_MIB(PA_ACTIVERXDATALANES),
+						dev_req_params->lane_rx);
+		ufshcd_dme_set(hba, UIC_ARG_MIB(PA_HSSERIES),
+						dev_req_params->hs_rate);
+
+		ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXHSADAPTTYPE),
+		     PA_NO_ADAPT);
+
+		ret = ufshcd_uic_change_pwr_mode(hba,
+			FASTAUTO_MODE << 4 | FASTAUTO_MODE);
+
+		if (ret) {
+			dev_err(hba->dev, "%s: HSG1B FASTAUTO failed ret=%d\n",
+				__func__, ret);
+		}
+	}
+
 	if (host->hw_ver.major >= 3) {
 		ret = ufshcd_dme_configure_adapt(hba,
 					   dev_req_params->gear_tx,
drivers/ufs/host/ufs-mediatek.h +1 -0
index 414dca86c09f..7e1913769671 100755
@@ -108,6 +108,7 @@ enum ufs_mtk_host_caps {
 	UFS_MTK_CAP_VA09_PWR_CTRL              = 1 << 1,
 	UFS_MTK_CAP_DISABLE_AH8                = 1 << 2,
 	UFS_MTK_CAP_BROKEN_VCC                 = 1 << 3,
+	UFS_MTK_CAP_PMC_VIA_FASTAUTO           = 1 << 6,
 };
 
 struct ufs_mtk_crypt_cfg {
include/ufs/unipro.h +1 -0
index 0521f887e3ac..4b13fbf8ee18 100755
@@ -229,6 +229,7 @@ enum ufs_hs_gear_tag {
 	UFS_HS_G2,		/* HS Gear 2 */
 	UFS_HS_G3,		/* HS Gear 3 */
 	UFS_HS_G4,		/* HS Gear 4 */
+	UFS_HS_G5		/* HS Gear 5 */
 };
 
 enum ufs_unipro_ver {
Signature · 1 line
2.18.0
#4 lore raw

Re: [PATCH v3 03/10] scsi: ufs-mediatek: Introduce workaround for power mode change

drivers/ufs/host/ufs-mediatek.c static int ufs_mtk_init(struct ufs_hba *hba) · line 782

Quoted 7 lines · Stanley Chu
drivers/ufs/host/ufs-mediatek.c +7 -0
+	if ((dev_req_params->pwr_tx != FAST_MODE) &&
+		(dev_req_params->gear_tx < UFS_HS_G4))
+		return false;
+
+	if ((dev_req_params->pwr_rx != FAST_MODE) &&
+		(dev_req_params->gear_rx < UFS_HS_G4))
+		return false;

Please do not use more parentheses than needed. I think 8 parentheses can be left out from the above code.

Thanks,

Bart.

#5 lore raw

Re: [PATCH v3 03/10] scsi: ufs-mediatek: Introduce workaround for power mode change

Quoted 12 lines · Bart Van Assche

drivers/ufs/host/ufs-mediatek.c static int ufs_mtk_init(struct ufs_hba *hba) · line 782

Quoted 7 lines · Stanley Chu
drivers/ufs/host/ufs-mediatek.c +7 -0
+	if ((dev_req_params->pwr_tx != FAST_MODE) &&
+		(dev_req_params->gear_tx < UFS_HS_G4))
+		return false;
+
+	if ((dev_req_params->pwr_rx != FAST_MODE) &&
+		(dev_req_params->gear_rx < UFS_HS_G4))
+		return false;

Please do not use more parentheses than needed. I think 8 parentheses
can be left out from the above code.

Thanks! fixed in v4.

Quoted 4 lines

Thanks,

Bart.

#6 lore raw

PATCH v3 4/10 scsi: ufs-mediatek: Fix the timing of configuring device regulators

In reply to Stanley Chu

From: Po-Wen Kao <[email protected]>

Currently the LPM configurations of device regulators may not work since VCC is not disabled yet while ufs_mtk_vreg_set_lpm() is executed.

Fix it by changing the timing of invoking ufs_mtk_vreg_set_lpm().

---
 drivers/ufs/host/ufs-mediatek.c | 60 ++++++++++++++++++++++++++++++---
 1 file changed, 55 insertions(+), 5 deletions(-)
drivers/ufs/host/ufs-mediatek.c +55 -5
index 21d591925dc4..3b3fe5470b71 100755
@@ -1082,7 +1082,6 @@ static int ufs_mtk_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op,
 		 * ufshcd_suspend() re-enabling regulators while vreg is still
 		 * in low-power mode.
 		 */
-		ufs_mtk_vreg_set_lpm(hba, true);
 		err = ufs_mtk_mphy_power_on(hba, false);
 		if (err)
 			goto fail;
@@ -1106,12 +1105,13 @@ static int ufs_mtk_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 {
 	int err;
 
+	if (hba->ufshcd_state != UFSHCD_STATE_OPERATIONAL)
+		ufs_mtk_vreg_set_lpm(hba, false);
+
 	err = ufs_mtk_mphy_power_on(hba, true);
 	if (err)
 		goto fail;
 
-	ufs_mtk_vreg_set_lpm(hba, false);
-
 	if (ufshcd_is_link_hibern8(hba)) {
 		err = ufs_mtk_link_set_hpm(hba);
 		if (err)
@@ -1276,9 +1276,59 @@ static int ufs_mtk_remove(struct platform_device *pdev)
 	return 0;
 }
 
+int ufs_mtk_system_suspend(struct device *dev)
+{
+	int ret = 0;
+	struct ufs_hba *hba = dev_get_drvdata(dev);
+
+	ret = ufshcd_system_suspend(dev);
+
+	if (!ret)
+		ufs_mtk_vreg_set_lpm(hba, true);
+
+	return ret;
+}
+
+int ufs_mtk_system_resume(struct device *dev)
+{
+	int ret = 0;
+	struct ufs_hba *hba = dev_get_drvdata(dev);
+
+	ufs_mtk_vreg_set_lpm(hba, false);
+
+	ret = ufshcd_system_resume(dev);
+
+	return ret;
+}
+
+int ufs_mtk_runtime_suspend(struct device *dev)
+{
+	struct ufs_hba *hba = dev_get_drvdata(dev);
+	int ret = 0;
+
+	ret = ufshcd_runtime_suspend(dev);
+
+	if (!ret)
+		ufs_mtk_vreg_set_lpm(hba, true);
+
+	return ret;
+}
+
+int ufs_mtk_runtime_resume(struct device *dev)
+{
+	struct ufs_hba *hba = dev_get_drvdata(dev);
+	int ret = 0;
+
+	ufs_mtk_vreg_set_lpm(hba, false);
+
+	ret = ufshcd_runtime_resume(dev);
+
+	return ret;
+}
+
 static const struct dev_pm_ops ufs_mtk_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(ufshcd_system_suspend, ufshcd_system_resume)
-	SET_RUNTIME_PM_OPS(ufshcd_runtime_suspend, ufshcd_runtime_resume, NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(ufs_mtk_system_suspend, ufs_mtk_system_resume)
+	SET_RUNTIME_PM_OPS(ufs_mtk_runtime_suspend, ufs_mtk_runtime_resume, NULL)
 	.prepare	 = ufshcd_suspend_prepare,
 	.complete	 = ufshcd_resume_complete,
 };
Signature · 1 line
2.18.0
#7 lore raw

Re: [PATCH v3 04/10] scsi: ufs-mediatek: Fix the timing of configuring device regulators

drivers/ufs/host/ufs-mediatek.c static int ufs_mtk_remove(struct platform_device *pdev) · line 1290

Quoted 12 lines · Stanley Chu
drivers/ufs/host/ufs-mediatek.c +12 -0
+int ufs_mtk_system_suspend(struct device *dev)
+{
+	int ret = 0;
+	struct ufs_hba *hba = dev_get_drvdata(dev);
+
+	ret = ufshcd_system_suspend(dev);
+
+	if (!ret)
+		ufs_mtk_vreg_set_lpm(hba, true);
+
+	return ret;
+}

Please use the traditional kernel coding style and return early in case of an error. For the above code, that means to rewrite it as follows:

	struct ufs_hba *hba = dev_get_drvdata(dev);
	int ret;

	ret = ufshcd_system_suspend(dev);
	if (ret)
		return ret;

	ufs_mtk_vreg_set_lpm(hba, true);

	return 0;

drivers/ufs/host/ufs-mediatek.c static int ufs_mtk_remove(struct platform_device *pdev) · line 1302

Quoted 11 lines
drivers/ufs/host/ufs-mediatek.c +11 -0
+int ufs_mtk_system_resume(struct device *dev)
+{
+	int ret = 0;
+	struct ufs_hba *hba = dev_get_drvdata(dev);
+
+	ufs_mtk_vreg_set_lpm(hba, false);
+
+	ret = ufshcd_system_resume(dev);
+
+	return ret;
+}

Please remove the variable 'ret' from the above function.

drivers/ufs/host/ufs-mediatek.c static int ufs_mtk_remove(struct platform_device *pdev) · line 1315

Quoted 12 lines
drivers/ufs/host/ufs-mediatek.c +12 -0
+int ufs_mtk_runtime_suspend(struct device *dev)
+{
+	struct ufs_hba *hba = dev_get_drvdata(dev);
+	int ret = 0;
+
+	ret = ufshcd_runtime_suspend(dev);
+
+	if (!ret)
+		ufs_mtk_vreg_set_lpm(hba, true);
+
+	return ret;
+}

Please use the "early return" style.

drivers/ufs/host/ufs-mediatek.c static int ufs_mtk_remove(struct platform_device *pdev) · line 1327

Quoted 11 lines
drivers/ufs/host/ufs-mediatek.c +11 -0
+int ufs_mtk_runtime_resume(struct device *dev)
+{
+	struct ufs_hba *hba = dev_get_drvdata(dev);
+	int ret = 0;
+
+	ufs_mtk_vreg_set_lpm(hba, false);
+
+	ret = ufshcd_runtime_resume(dev);
+
+	return ret;
+}

Please remove the variable 'ret' from the above function.

Thanks,

Bart.

#8 lore raw

Re: [PATCH v3 04/10] scsi: ufs-mediatek: Fix the timing of configuring device regulators

Quoted 19 lines · Bart Van Assche

drivers/ufs/host/ufs-mediatek.c static int ufs_mtk_remove(struct platform_device *pdev) · line 1290

Quoted 12 lines · Stanley Chu
drivers/ufs/host/ufs-mediatek.c +12 -0
+int ufs_mtk_system_suspend(struct device *dev)
+{
+	int ret = 0;
+	struct ufs_hba *hba = dev_get_drvdata(dev);
+
+	ret = ufshcd_system_suspend(dev);
+
+	if (!ret)
+		ufs_mtk_vreg_set_lpm(hba, true);
+
+	return ret;
+}

Please use the traditional kernel coding style and return early in case
of an error. For the above code, that means to rewrite it as follows:

Quoted 10 lines
	struct ufs_hba *hba = dev_get_drvdata(dev);
	int ret;

	ret = ufshcd_system_suspend(dev);
	if (ret)
		return ret;

	ufs_mtk_vreg_set_lpm(hba, true);

	return 0;

OK! Fixed in v4.

Quoted 14 lines

drivers/ufs/host/ufs-mediatek.c static int ufs_mtk_remove(struct platform_device *pdev) · line 1302

Quoted 12 lines
drivers/ufs/host/ufs-mediatek.c +11 -0
+int ufs_mtk_system_resume(struct device *dev)
+{
+	int ret = 0;
+	struct ufs_hba *hba = dev_get_drvdata(dev);
+
+	ufs_mtk_vreg_set_lpm(hba, false);
+
+	ret = ufshcd_system_resume(dev);
+
+	return ret;
+}

Please remove the variable 'ret' from the above function.

OK! Fixed in v4.

Quoted 15 lines

drivers/ufs/host/ufs-mediatek.c static int ufs_mtk_remove(struct platform_device *pdev) · line 1315

Quoted 13 lines
drivers/ufs/host/ufs-mediatek.c +12 -0
+int ufs_mtk_runtime_suspend(struct device *dev)
+{
+	struct ufs_hba *hba = dev_get_drvdata(dev);
+	int ret = 0;
+
+	ret = ufshcd_runtime_suspend(dev);
+
+	if (!ret)
+		ufs_mtk_vreg_set_lpm(hba, true);
+
+	return ret;
+}

Please use the "early return" style.

OK! Fixed in v4.

Quoted 14 lines

drivers/ufs/host/ufs-mediatek.c static int ufs_mtk_remove(struct platform_device *pdev) · line 1327

Quoted 12 lines
drivers/ufs/host/ufs-mediatek.c +11 -0
+int ufs_mtk_runtime_resume(struct device *dev)
+{
+	struct ufs_hba *hba = dev_get_drvdata(dev);
+	int ret = 0;
+
+	ufs_mtk_vreg_set_lpm(hba, false);
+
+	ret = ufshcd_runtime_resume(dev);
+
+	return ret;
+}

Please remove the variable 'ret' from the above function.

OK! Fixed in v4.

Quoted 4 lines

Thanks,

Bart.

#9 lore raw

PATCH v3 5/10 scsi: ufs-mediatek: Prevent device regulators setting as LPM incorrectly

In reply to Stanley Chu

From: Po-Wen Kao <[email protected]>

Device regulatrs are allowed to enter low-power mode if neither device is not in active mode, nor VCC does not keep on.

Simply fix this by adding conditions before LPM decision.

---
 drivers/ufs/host/ufs-mediatek.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)
drivers/ufs/host/ufs-mediatek.c +10 -2
index 3b3fe5470b71..c9afe373437c 100755
@@ -1034,10 +1034,18 @@ static void ufs_mtk_vreg_set_lpm(struct ufs_hba *hba, bool lpm)
 	if (!hba->vreg_info.vccq2 || !hba->vreg_info.vcc)
 		return;
 
-	if (lpm && !hba->vreg_info.vcc->enabled)
+	/* Bypass LPM when device is still active */
+	if (lpm && ufshcd_is_ufs_dev_active(hba))
+		return;
+
+	/* Bypass LPM if VCC is enabled */
+	if (lpm && hba->vreg_info.vcc->enabled)
+		return;
+
+	if (lpm)
 		regulator_set_mode(hba->vreg_info.vccq2->reg,
 				   REGULATOR_MODE_IDLE);
-	else if (!lpm)
+	else
 		regulator_set_mode(hba->vreg_info.vccq2->reg,
 				   REGULATOR_MODE_NORMAL);
 }
Signature · 1 line
2.18.0
#10 lore raw

PATCH v3 6/10 scsi: ufs-mediatek: Support low-power mode for VCCQ

In reply to Stanley Chu

From: Peter Wang <[email protected]>

Also allow VCCQ to enter low-power mode, and meanwhile remove the restriction of VCC because VCCQ/VCCQ2 can be changed to low-power mode even if VCC keeps on while the device is not in active power mode.

---
 drivers/ufs/host/ufs-mediatek.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)
drivers/ufs/host/ufs-mediatek.c +13 -6
index c9afe373437c..178043ab837c 100755
@@ -1031,7 +1031,13 @@ static int ufs_mtk_link_set_lpm(struct ufs_hba *hba)
 
 static void ufs_mtk_vreg_set_lpm(struct ufs_hba *hba, bool lpm)
 {
-	if (!hba->vreg_info.vccq2 || !hba->vreg_info.vcc)
+	struct ufs_vreg *vccqx = NULL;
+
+	if (!hba->vreg_info.vccq && !hba->vreg_info.vccq2)
+		return;
+
+	/* Skip if VCC is assumed always-on */
+	if (!hba->vreg_info.vcc)
 		return;
 
 	/* Bypass LPM when device is still active */
@@ -1042,12 +1048,13 @@ static void ufs_mtk_vreg_set_lpm(struct ufs_hba *hba, bool lpm)
 	if (lpm && hba->vreg_info.vcc->enabled)
 		return;
 
-	if (lpm)
-		regulator_set_mode(hba->vreg_info.vccq2->reg,
-				   REGULATOR_MODE_IDLE);
+	if (hba->vreg_info.vccq)
+		vccqx = hba->vreg_info.vccq;
 	else
-		regulator_set_mode(hba->vreg_info.vccq2->reg,
-				   REGULATOR_MODE_NORMAL);
+		vccqx = hba->vreg_info.vccq2;
+
+	regulator_set_mode(vccqx->reg,
+		lpm ? REGULATOR_MODE_IDLE : REGULATOR_MODE_NORMAL);
 }
 
 static void ufs_mtk_auto_hibern8_disable(struct ufs_hba *hba)
Signature · 1 line
2.18.0
#11 lore raw

PATCH v3 7/10 scsi: ufs-mediatek: Support flexible parameters for smc calls

In reply to Stanley Chu

From: Alice Chao <[email protected]>

Provide flexible number of parameters for UFS SMC calls to be easily used for future SMC usages.

This is a preparation patch for the next patch.

---
 drivers/ufs/host/ufs-mediatek.c | 16 ----------
 drivers/ufs/host/ufs-mediatek.h | 56 +++++++++++++++++++++++++++++++++
 2 files changed, 56 insertions(+), 16 deletions(-)
drivers/ufs/host/ufs-mediatek.c +0 -16
index 178043ab837c..9337ce27329b 100755
@@ -30,22 +30,6 @@
 #define CREATE_TRACE_POINTS
 #include "ufs-mediatek-trace.h"
 
-#define ufs_mtk_smc(cmd, val, res) \
-	arm_smccc_smc(MTK_SIP_UFS_CONTROL, \
-		      cmd, val, 0, 0, 0, 0, 0, &(res))
-
-#define ufs_mtk_va09_pwr_ctrl(res, on) \
-	ufs_mtk_smc(UFS_MTK_SIP_VA09_PWR_CTRL, on, res)
-
-#define ufs_mtk_crypto_ctrl(res, enable) \
-	ufs_mtk_smc(UFS_MTK_SIP_CRYPTO_CTRL, enable, res)
-
-#define ufs_mtk_ref_clk_notify(on, res) \
-	ufs_mtk_smc(UFS_MTK_SIP_REF_CLK_NOTIFICATION, on, res)
-
-#define ufs_mtk_device_reset_ctrl(high, res) \
-	ufs_mtk_smc(UFS_MTK_SIP_DEVICE_RESET, high, res)
-
 static const struct ufs_dev_quirk ufs_mtk_dev_fixups[] = {
 	{ .wmanufacturerid = UFS_VENDOR_MICRON,
 	  .model = UFS_ANY_MODEL,
drivers/ufs/host/ufs-mediatek.h +56 -0

60 lines not on this page · raw message

Signature · 1 line
2.18.0
#12 lore raw

Re: [PATCH v3 07/10] scsi: ufs-mediatek: Support flexible parameters for smc calls

Quoted 4 lines · Stanley Chu

From: Alice Chao <[email protected]>

Provide flexible number of parameters for UFS SMC calls to be easily used for future SMC usages.

How far in the future? Please only introduce what is needed for this patch series.

Quoted 2 lines

+/*
+ * SMC call wapper function

               ^^^^^^

typo

Quoted 28 lines

+ */

drivers/ufs/host/ufs-mediatek.h +27 -0
+#define _ufs_mtk_smc(cmd, res, v1, v2, v3, v4, v5, v6) \
+		arm_smccc_smc(MTK_SIP_UFS_CONTROL, \
+				  cmd, v1, v2, v3, v4, v5, v6, &(res))
+
+#define _ufs_mtk_smc_0(cmd, res) \
+	_ufs_mtk_smc(cmd, res, 0, 0, 0, 0, 0, 0)
+
+#define _ufs_mtk_smc_1(cmd, res, v1) \
+	_ufs_mtk_smc(cmd, res, v1, 0, 0, 0, 0, 0)
+
+#define _ufs_mtk_smc_2(cmd, res, v1, v2) \
+	_ufs_mtk_smc(cmd, res, v1, v2, 0, 0, 0, 0)
+
+#define _ufs_mtk_smc_3(cmd, res, v1, v2, v3) \
+	_ufs_mtk_smc(cmd, res, v1, v2, v3, 0, 0, 0)
+
+#define _ufs_mtk_smc_4(cmd, res, v1, v2, v3, v4) \
+	_ufs_mtk_smc(cmd, res, v1, v2, v3, v4, 0, 0)
+
+#define _ufs_mtk_smc_5(cmd, res, v1, v2, v3, v4, v5) \
+	_ufs_mtk_smc(cmd, res, v1, v2, v3, v4, v5, 0)
+
+#define _ufs_mtk_smc_6(cmd, res, v1, v2, v3, v4, v5, v6) \
+	_ufs_mtk_smc(cmd, res, v1, v2, v3, v4, v5, v6)
+
+#define _ufs_mtk_smc_selector(cmd, res, v1, v2, v3, v4, v5, v6, FUNC, ...) FUNC
+

drivers/ufs/host/ufs-mediatek.h struct ufs_mtk_host { · line 185

Quoted 10 lines
drivers/ufs/host/ufs-mediatek.h +10 -0
+#define ufs_mtk_smc(...) \
+	_ufs_mtk_smc_selector(__VA_ARGS__, \
+	_ufs_mtk_smc_6(__VA_ARGS__), \
+	_ufs_mtk_smc_5(__VA_ARGS__), \
+	_ufs_mtk_smc_4(__VA_ARGS__), \
+	_ufs_mtk_smc_3(__VA_ARGS__), \
+	_ufs_mtk_smc_2(__VA_ARGS__), \
+	_ufs_mtk_smc_1(__VA_ARGS__), \
+	_ufs_mtk_smc_0(__VA_ARGS__) \
+	)

If _ufs_mtk_smc() would be modified to accept an struct _ufs_mtk_args as its only argument, would that allow to simplify the above into the following?

#define ufs_mtk_smc(...) \
_ufs_mtk_smc((struct _ufs_mtk_args){__VA_ARGS__})

Quoted 3 lines

+/*
+ * Sip kernel interface
+ */

What is "Sip"? Should it perhaps be spelled as "SIP"?

Thanks,

Bart.

#13 lore raw

Re: [PATCH v3 07/10] scsi: ufs-mediatek: Support flexible parameters for smc calls

Hi Bart,

Quoted 8 lines · Bart Van Assche
Quoted 4 lines · Stanley Chu

From: Alice Chao <[email protected]>

Provide flexible number of parameters for UFS SMC calls to be easily used for future SMC usages.

How far in the future? Please only introduce what is needed for this patch series.

Sure, I just rewrote and simplified SMC call macros according to your good suggestions in v4.

Quoted 6 lines
Quoted 3 lines

+/*
+ * SMC call wapper function

                ^^^^^^

typo

Fixed in v4.

Quoted 58 lines
Quoted 30 lines

+ */

drivers/ufs/host/ufs-mediatek.h +26 -0
+#define _ufs_mtk_smc(cmd, res, v1, v2, v3, v4, v5, v6) \
+		arm_smccc_smc(MTK_SIP_UFS_CONTROL, \
+				  cmd, v1, v2, v3, v4, v5, v6, &(res))
+
+#define _ufs_mtk_smc_0(cmd, res) \
+	_ufs_mtk_smc(cmd, res, 0, 0, 0, 0, 0, 0)
+
+#define _ufs_mtk_smc_1(cmd, res, v1) \
+	_ufs_mtk_smc(cmd, res, v1, 0, 0, 0, 0, 0)
+
+#define _ufs_mtk_smc_2(cmd, res, v1, v2) \
+	_ufs_mtk_smc(cmd, res, v1, v2, 0, 0, 0, 0)
+
+#define _ufs_mtk_smc_3(cmd, res, v1, v2, v3) \
+	_ufs_mtk_smc(cmd, res, v1, v2, v3, 0, 0, 0)
+
+#define _ufs_mtk_smc_4(cmd, res, v1, v2, v3, v4) \
+	_ufs_mtk_smc(cmd, res, v1, v2, v3, v4, 0, 0)
+
+#define _ufs_mtk_smc_5(cmd, res, v1, v2, v3, v4, v5) \
+	_ufs_mtk_smc(cmd, res, v1, v2, v3, v4, v5, 0)
+
+#define _ufs_mtk_smc_6(cmd, res, v1, v2, v3, v4, v5, v6) \
+	_ufs_mtk_smc(cmd, res, v1, v2, v3, v4, v5, v6)
+
+#define _ufs_mtk_smc_selector(cmd, res, v1, v2, v3, v4, v5, v6,

FUNC, ...) FUNC

drivers/ufs/host/ufs-mediatek.h +1 -0
+

drivers/ufs/host/ufs-mediatek.h struct ufs_mtk_host { · line 185

Quoted 10 lines
drivers/ufs/host/ufs-mediatek.h +10 -0
+#define ufs_mtk_smc(...) \
+	_ufs_mtk_smc_selector(__VA_ARGS__, \
+	_ufs_mtk_smc_6(__VA_ARGS__), \
+	_ufs_mtk_smc_5(__VA_ARGS__), \
+	_ufs_mtk_smc_4(__VA_ARGS__), \
+	_ufs_mtk_smc_3(__VA_ARGS__), \
+	_ufs_mtk_smc_2(__VA_ARGS__), \
+	_ufs_mtk_smc_1(__VA_ARGS__), \
+	_ufs_mtk_smc_0(__VA_ARGS__) \
+	)

If _ufs_mtk_smc() would be modified to accept an struct _ufs_mtk_args as
its only argument, would that allow to simplify the above into the following?

#define ufs_mtk_smc(...) \
   _ufs_mtk_smc((struct _ufs_mtk_args){__VA_ARGS__})
Quoted 3 lines

+/*
+ * Sip kernel interface
+ */

What is "Sip"? Should it perhaps be spelled as "SIP"?

Thanks,

Bart.

#14 lore raw

PATCH v3 8/10 scsi: ufs-mediatek: Support low-power mode for parents of VCCQx

In reply to Stanley Chu

Provide the facility to configure parents of VCCQx power rails as low-power or full-power mode in MediaTek UFS platforms.

---
 drivers/ufs/host/ufs-mediatek.c | 45 +++++++++++++++++++++++----------
 drivers/ufs/host/ufs-mediatek.h |  4 +++
 2 files changed, 36 insertions(+), 13 deletions(-)
drivers/ufs/host/ufs-mediatek.c +32 -13
index 9337ce27329b..2c1e55f8d7c6 100755
@@ -1013,10 +1013,29 @@ static int ufs_mtk_link_set_lpm(struct ufs_hba *hba)
 	return 0;
 }
 
-static void ufs_mtk_vreg_set_lpm(struct ufs_hba *hba, bool lpm)
+static void ufs_mtk_vccqx_set_lpm(struct ufs_hba *hba, bool lpm)
 {
 	struct ufs_vreg *vccqx = NULL;
 
+	if (hba->vreg_info.vccq)
+		vccqx = hba->vreg_info.vccq;
+	else
+		vccqx = hba->vreg_info.vccq2;
+
+	regulator_set_mode(vccqx->reg,
+		lpm ? REGULATOR_MODE_IDLE : REGULATOR_MODE_NORMAL);
+}
+
+static void ufs_mtk_vsx_set_lpm(struct ufs_hba *hba, bool lpm)
+{
+	struct arm_smccc_res res;
+
+	ufs_mtk_device_pwr_ctrl(!lpm,
+		(unsigned long)hba->dev_info.wspecversion, res);
+}
+
+static void ufs_mtk_dev_vreg_set_lpm(struct ufs_hba *hba, bool lpm)
+{
 	if (!hba->vreg_info.vccq && !hba->vreg_info.vccq2)
 		return;
 
@@ -1032,13 +1051,13 @@ static void ufs_mtk_vreg_set_lpm(struct ufs_hba *hba, bool lpm)
 	if (lpm && hba->vreg_info.vcc->enabled)
 		return;
 
-	if (hba->vreg_info.vccq)
-		vccqx = hba->vreg_info.vccq;
-	else
-		vccqx = hba->vreg_info.vccq2;
-
-	regulator_set_mode(vccqx->reg,
-		lpm ? REGULATOR_MODE_IDLE : REGULATOR_MODE_NORMAL);
+	if (lpm) {
+		ufs_mtk_vccqx_set_lpm(hba, lpm);
+		ufs_mtk_vsx_set_lpm(hba, lpm);
+	} else {
+		ufs_mtk_vsx_set_lpm(hba, lpm);
+		ufs_mtk_vccqx_set_lpm(hba, lpm);
+	}
 }
 
 static void ufs_mtk_auto_hibern8_disable(struct ufs_hba *hba)
@@ -1105,7 +1124,7 @@ static int ufs_mtk_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 	int err;
 
 	if (hba->ufshcd_state != UFSHCD_STATE_OPERATIONAL)
-		ufs_mtk_vreg_set_lpm(hba, false);
+		ufs_mtk_dev_vreg_set_lpm(hba, false);
 
 	err = ufs_mtk_mphy_power_on(hba, true);
 	if (err)
@@ -1283,7 +1302,7 @@ int ufs_mtk_system_suspend(struct device *dev)
 	ret = ufshcd_system_suspend(dev);
 
 	if (!ret)
-		ufs_mtk_vreg_set_lpm(hba, true);
+		ufs_mtk_dev_vreg_set_lpm(hba, true);
 
 	return ret;
 }
@@ -1293,7 +1312,7 @@ int ufs_mtk_system_resume(struct device *dev)
 	int ret = 0;
 	struct ufs_hba *hba = dev_get_drvdata(dev);
 
-	ufs_mtk_vreg_set_lpm(hba, false);
+	ufs_mtk_dev_vreg_set_lpm(hba, false);
 
 	ret = ufshcd_system_resume(dev);
 
@@ -1308,7 +1327,7 @@ int ufs_mtk_runtime_suspend(struct device *dev)
 	ret = ufshcd_runtime_suspend(dev);
 
 	if (!ret)
-		ufs_mtk_vreg_set_lpm(hba, true);
+		ufs_mtk_dev_vreg_set_lpm(hba, true);
 
 	return ret;
 }
@@ -1318,7 +1337,7 @@ int ufs_mtk_runtime_resume(struct device *dev)
 	struct ufs_hba *hba = dev_get_drvdata(dev);
 	int ret = 0;
 
-	ufs_mtk_vreg_set_lpm(hba, false);
+	ufs_mtk_dev_vreg_set_lpm(hba, false);
 
 	ret = ufshcd_runtime_resume(dev);
 
drivers/ufs/host/ufs-mediatek.h +4 -0
index 9117427ca6c4..eb26306a719f 100755
@@ -83,6 +83,7 @@ enum {
 #define UFS_MTK_SIP_DEVICE_RESET          BIT(1)
 #define UFS_MTK_SIP_CRYPTO_CTRL           BIT(2)
 #define UFS_MTK_SIP_REF_CLK_NOTIFICATION  BIT(3)
+#define UFS_MTK_SIP_DEVICE_PWR_CTRL       BIT(7)
 
 /*
  * VS_DEBUGCLOCKENABLE
@@ -199,4 +200,7 @@ struct ufs_mtk_host {
 #define ufs_mtk_device_reset_ctrl(high, res) \
 	ufs_mtk_smc(UFS_MTK_SIP_DEVICE_RESET, res, high)
 
+#define ufs_mtk_device_pwr_ctrl(on, ufs_ver, res) \
+	ufs_mtk_smc(UFS_MTK_SIP_DEVICE_PWR_CTRL, res, on, ufs_ver)
+
 #endif /* !_UFS_MEDIATEK_H */
Signature · 1 line
2.18.0
#15 lore raw

PATCH v3 9/10 scsi: ufs: Export regulator functions

In reply to Stanley Chu

Export below regulator functions to allow vendors to customize regulator configuration in their own platforms.

int ufshcd_populate_vreg(struct device *dev, const char *name,

                         struct ufs_vreg **out_vreg);

int ufshcd_get_vreg(struct device *dev, struct ufs_vreg *vreg);

---
 drivers/ufs/core/ufshcd.c        | 3 ++-
 drivers/ufs/host/ufshcd-pltfrm.c | 3 ++-
 drivers/ufs/host/ufshcd-pltfrm.h | 2 ++
 include/ufs/ufshcd.h             | 2 ++
 4 files changed, 8 insertions(+), 2 deletions(-)
drivers/ufs/core/ufshcd.c +2 -1
index 0d16739c67bb..8131a75e41e5 100755
@@ -8408,7 +8408,7 @@ static int ufshcd_setup_hba_vreg(struct ufs_hba *hba, bool on)
 	return ufshcd_toggle_vreg(hba->dev, info->vdd_hba, on);
 }
 
-static int ufshcd_get_vreg(struct device *dev, struct ufs_vreg *vreg)
+int ufshcd_get_vreg(struct device *dev, struct ufs_vreg *vreg)
 {
 	int ret = 0;
 
@@ -8424,6 +8424,7 @@ static int ufshcd_get_vreg(struct device *dev, struct ufs_vreg *vreg)
 out:
 	return ret;
 }
+EXPORT_SYMBOL_GPL(ufshcd_get_vreg);
 
 static int ufshcd_init_vreg(struct ufs_hba *hba)
 {
drivers/ufs/host/ufshcd-pltfrm.c +2 -1
index e7332cc65b1f..332f66828d80 100755
@@ -109,7 +109,7 @@ static int ufshcd_parse_clock_info(struct ufs_hba *hba)
 }
 
 #define MAX_PROP_SIZE 32
-static int ufshcd_populate_vreg(struct device *dev, const char *name,
+int ufshcd_populate_vreg(struct device *dev, const char *name,
 		struct ufs_vreg **out_vreg)
 {
 	char prop_name[MAX_PROP_SIZE];
@@ -145,6 +145,7 @@ static int ufshcd_populate_vreg(struct device *dev, const char *name,
 	*out_vreg = vreg;
 	return 0;
 }
+EXPORT_SYMBOL_GPL(ufshcd_populate_vreg);
 
 /**
  * ufshcd_parse_regulator_info - get regulator info from device tree
drivers/ufs/host/ufshcd-pltfrm.h +2 -0
index 43c2e412bd99..5130c9471dc2 100755
@@ -32,5 +32,7 @@ void ufshcd_init_pwr_dev_param(struct ufs_dev_params *dev_param);
 int ufshcd_pltfrm_init(struct platform_device *pdev,
 		       const struct ufs_hba_variant_ops *vops);
 void ufshcd_pltfrm_shutdown(struct platform_device *pdev);
+int ufshcd_populate_vreg(struct device *dev, const char *name,
+			 struct ufs_vreg **out_vreg);
 
 #endif /* UFSHCD_PLTFRM_H_ */
include/ufs/ufshcd.h +2 -0
index aa778418703f..18eb253cfd91 100755
@@ -1187,6 +1187,8 @@ void ufshcd_map_desc_id_to_length(struct ufs_hba *hba, enum desc_idn desc_id,
 
 u32 ufshcd_get_local_unipro_ver(struct ufs_hba *hba);
 
+int ufshcd_get_vreg(struct device *dev, struct ufs_vreg *vreg);
+
 int ufshcd_send_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd);
 
 int ufshcd_exec_raw_upiu_cmd(struct ufs_hba *hba,
Signature · 1 line
2.18.0
#16 lore raw

PATCH v3 10/10 scsi: ufs-mediatek: Support multiple VCC sources

In reply to Stanley Chu

Support multiple VCC source in MediaTek UFS platforms.

Two options are provided and distinguished by specific device tree attributes as below examples,

[Option 1: By numbering]
mediatek,ufs-vcc-by-num;
vcc-opt1-supply = <&mt6373_vbuck4_ufs>;
vcc-opt2-supply = <&mt6363_vemc>;

[Option 2: By UFS version]
mediatek,ufs-vcc-by-ver;
vcc-ufs3-supply = <&mt6373_vbuck4_ufs>;

---
 drivers/ufs/host/ufs-mediatek.c | 46 +++++++++++++++++++++++++++++++++
 drivers/ufs/host/ufs-mediatek.h | 14 ++++++++++
 2 files changed, 60 insertions(+)
drivers/ufs/host/ufs-mediatek.c +46 -0
index 2c1e55f8d7c6..a029ec2fc971 100755
@@ -669,6 +669,50 @@ static u32 ufs_mtk_get_ufs_hci_version(struct ufs_hba *hba)
 	return hba->ufs_version;
 }
 
+#define MAX_VCC_NAME 30
+static int ufs_mtk_vreg_fix_vcc(struct ufs_hba *hba)
+{
+	struct ufs_vreg_info *info = &hba->vreg_info;
+	struct device_node *np = hba->dev->of_node;
+	struct device *dev = hba->dev;
+	char vcc_name[MAX_VCC_NAME];
+	struct arm_smccc_res res;
+	int err = 0;
+	int ver;
+
+	if (hba->vreg_info.vcc)
+		return 0;
+
+	if (of_property_read_bool(np, "mediatek,ufs-vcc-by-num")) {
+		ufs_mtk_get_vcc_num(res);
+		if (res.a1 > UFS_VCC_NONE && res.a1 < UFS_VCC_MAX)
+			snprintf(vcc_name, MAX_VCC_NAME, "vcc-opt%u", res.a1);
+		else
+			return -ENODEV;
+	} else if (of_property_read_bool(np, "mediatek,ufs-vcc-by-ver")) {
+		ver = (hba->dev_info.wspecversion & 0xF00) >> 8;
+		snprintf(vcc_name, MAX_VCC_NAME, "vcc-ufs%u", ver);
+	} else {
+		return 0;
+	}
+
+	err = ufshcd_populate_vreg(dev, vcc_name, &info->vcc);
+	if (err)
+		return err;
+
+	err = ufshcd_get_vreg(dev, info->vcc);
+	if (err)
+		return err;
+
+	err = regulator_enable(info->vcc->reg);
+	if (!err) {
+		info->vcc->enabled = true;
+		dev_info(dev, "%s: %s enabled\n", __func__, vcc_name);
+	}
+
+	return err;
+}
+
 /**
  * ufs_mtk_init - find other essential mmio bases
  * @hba: host controller instance
@@ -1179,6 +1223,8 @@ static int ufs_mtk_apply_dev_quirks(struct ufs_hba *hba)
 		ufs_mtk_setup_ref_clk_wait_us(hba,
 					      REFCLK_DEFAULT_WAIT_US);
 
+	ufs_mtk_vreg_fix_vcc(hba);
+
 	return 0;
 }
 
drivers/ufs/host/ufs-mediatek.h +14 -0
index eb26306a719f..b72007ecba05 100755
@@ -83,6 +83,7 @@ enum {
 #define UFS_MTK_SIP_DEVICE_RESET          BIT(1)
 #define UFS_MTK_SIP_CRYPTO_CTRL           BIT(2)
 #define UFS_MTK_SIP_REF_CLK_NOTIFICATION  BIT(3)
+#define UFS_MTK_SIP_GET_VCC_NUM           BIT(6)
 #define UFS_MTK_SIP_DEVICE_PWR_CTRL       BIT(7)
 
 /*
@@ -144,6 +145,16 @@ struct ufs_mtk_host {
 	u32 ip_ver;
 };
 
+/*
+ * Multi-VCC by Numbering
+ */
+enum ufs_mtk_vcc_num {
+	UFS_VCC_NONE = 0,
+	UFS_VCC_1,
+	UFS_VCC_2,
+	UFS_VCC_MAX
+};
+
 /*
  * SMC call wapper function
  */
@@ -200,6 +211,9 @@ struct ufs_mtk_host {
 #define ufs_mtk_device_reset_ctrl(high, res) \
 	ufs_mtk_smc(UFS_MTK_SIP_DEVICE_RESET, res, high)
 
+#define ufs_mtk_get_vcc_num(res) \
+	ufs_mtk_smc(UFS_MTK_SIP_GET_VCC_NUM, res)
+
 #define ufs_mtk_device_pwr_ctrl(on, ufs_ver, res) \
 	ufs_mtk_smc(UFS_MTK_SIP_DEVICE_PWR_CTRL, res, on, ufs_ver)
 
Signature · 1 line
2.18.0