mx6cuboxi: fix board detection while patching device-tree phy nodes
PATCH 1/1 mx6cuboxi: fix board detection while patching device-tree phy nodes
ft_board_setup relies on the board_type() function to optimize which phy nodes need to be enabled for Linux.
Add calls to setup and release the board-detect GPIOs.
Also fix the switch-case statement to only enable phy address 4 for Cubox and unknown devices.
Fixes 741ce308 ("mx6cuboxi: fixup dtb ethernet phy nodes before booting an OS")
Signed-off-by Josua Mayer <[email protected]>
--- board/solidrun/mx6cuboxi/mx6cuboxi.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-)
board/solidrun/mx6cuboxi/mx6cuboxi.c +12 -1
@@ -449,15 +449,26 @@ int ft_board_setup(void *fdt, struct bd_info *bd)int node_phy0, node_phy1, node_phy4;int ret, phy;bool enable_phy0 = false, enable_phy1 = false, enable_phy4 = false; +enum board_type board; + +// detect device +request_detect_gpios (); + board =board_type (); +free_detect_gpios ();// detect phy phy =find_ethernet_phy ();if (phy ==0 || phy ==4 ) { enable_phy0 = true; -switch (board_type ()) { +switch (board) { +case HUMMINGBOARD : +case HUMMINGBOARD2 : +/* atheros phy may appear only at address 0 */ +break ;case CUBOXI :case UNKNOWN :default : +/* atheros phy may appear at either address 0 or 4 */ enable_phy4 = true; } }else if (phy ==1 ) {
Signature · 1 line
2.35.3
PATCH 1/1 mx6cuboxi: fix board detection while patching device-tree phy nodes
Quoted 7 lines
ft_board_setuprelies on theboard_type()function to optimize which phy nodes need to be enabled for Linux.
Add calls to setup and release the board-detect GPIOs.
Also fix the switch-case statement to only enable phy address 4 for Cubox and unknown devices.Fixes 741ce308 ("mx6cuboxi: fixup dtb ethernet phy nodes before booting an OS")Signed-off-by Josua Mayer <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================