arm: dts: imx8mn-evk: sync dts from Linux Kernel
Subsystems (2)
PATCH v2 1/1 arm: dts: imx8mn-evk: sync dts from Linux Kernel
Sync dts for imx8mn-evk with Linux Kernel and change name for PMIC used in spl.
This was synced with linux 5.19-rc3 and contains the following changes:
commit 1cfa1e68af8d40ab233d5d27bc8446e4c5107571("arm64: dts: imx8mn-evk: fix the min/max voltages of the PMIC") commit bc046b952a5494b0dc53be28779460cee1214a3f("arm64: dts: imx8mn-evk: use proper names for PMIC outputs")
---
v2:
- stated the kernel version the sync was done from (thanks Fabio)
- update the patch subject to clarify that changes the evk dts (thanks Tim)
arch/arm/dts/imx8mn-evk.dts | 56 ++++++++++++++++---------------- board/freescale/imx8mn_evk/spl.c | 4 +-- 2 files changed, 30 insertions(+), 30 deletions(-)
arch/arm/dts/imx8mn-evk.dts +28 -28
@@ -31,7 +31,7 @@ }; &i2c1 { - pmic: pca9450@25 { + pmic: pmic@25 { compatible = "nxp,pca9450b"; reg = <0x25>; pinctrl-names = "default";
@@ -41,18 +41,18 @@ regulators { buck1: BUCK1{ - regulator-name = "BUCK1"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <2187500>; + regulator-name = "VDD_SOC"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <950000>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <3125>; }; buck2: BUCK2 { - regulator-name = "BUCK2"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <2187500>; + regulator-name = "VDD_ARM_0V9"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1000000>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <3125>;
@@ -61,63 +61,63 @@ }; buck4: BUCK4{ - regulator-name = "BUCK4"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <3400000>; + regulator-name = "VDD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; }; buck5: BUCK5{ - regulator-name = "BUCK5"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <3400000>; + regulator-name = "VDD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; }; buck6: BUCK6 { - regulator-name = "BUCK6"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <3400000>; + regulator-name = "NVCC_DRAM_1V1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; regulator-boot-on; regulator-always-on; }; ldo1: LDO1 { - regulator-name = "LDO1"; - regulator-min-microvolt = <1600000>; - regulator-max-microvolt = <3300000>; + regulator-name = "NVCC_SNVS_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; }; ldo2: LDO2 { - regulator-name = "LDO2"; + regulator-name = "VDD_SNVS_0V8"; regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1150000>; + regulator-max-microvolt = <800000>; regulator-boot-on; regulator-always-on; }; ldo3: LDO3 { - regulator-name = "LDO3"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3300000>; + regulator-name = "VDDA_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; }; ldo4: LDO4 { - regulator-name = "LDO4"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3300000>; + regulator-name = "VDD_PHY_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; regulator-boot-on; regulator-always-on; }; ldo5: LDO5 { - regulator-name = "LDO5"; + regulator-name = "NVCC_SD2"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-boot-on;
board/freescale/imx8mn_evk/spl.c +2 -2
@@ -69,9 +69,9 @@ int power_init_board(void)struct udevice *dev;int ret; - ret =pmic_get ("pca9450@25" , &dev); + ret =pmic_get ("pmic@25" , &dev);if (ret == -ENODEV ) { -puts ("No pca9450@25\n" ); +puts ("No pmci@25\n" );return 0 ; }if (ret !=0 )
Signature · 1 line
2.30.2
Hi Heiko,
Quoted 5 lines · Heiko Thiery
Sync dts for imx8mn-evk with Linux Kernel and change name for PMIC used in spl.
This was synced with linux 5.19-rc3 and contains the following changes:
Quoted 8 lines
commit 1cfa1e68af8d40ab233d5d27bc8446e4c5107571("arm64: dts: imx8mn-evk: fix the min/max voltages of the PMIC") commit
bc046b952a5494b0dc53be28779460cee1214a3f("arm64: dts: imx8mn-evk: use proper names for PMIC outputs")Signed-off-by Heiko Thiery <[email protected]>---
v2:
- stated the kernel version the sync was done from (thanks Fabio)
- update the patch subject to clarify that changes the evk dts (thanks Tim)
Thanks for the rework. It is clear now: