Skip to contentSkip to conversation

arm: dts: imx8mn-evk: sync dts from Linux Kernel

PATCH In review Heiko Thiery 2 participants 2 messages Jun 24, 2022

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 arm: dts: imx8mn-evk: sync dts from Linux Kernel

Sync dts for imx8mn-evk with Linux Kernel and change name for PMIC used in spl.

This was synced with linux 5.19-rc3 and contains the following changes:

commit 1cfa1e68af8d40ab233d5d27bc8446e4c5107571("arm64: dts: imx8mn-evk: fix the min/max voltages of the PMIC") commit bc046b952a5494b0dc53be28779460cee1214a3f("arm64: dts: imx8mn-evk: use proper names for PMIC outputs")

---
v2:
- stated the kernel version the sync was done from (thanks Fabio)
- update the patch subject to clarify that changes the evk dts (thanks Tim)

 arch/arm/dts/imx8mn-evk.dts      | 56 ++++++++++++++++----------------
 board/freescale/imx8mn_evk/spl.c |  4 +--
 2 files changed, 30 insertions(+), 30 deletions(-)
arch/arm/dts/imx8mn-evk.dts +28 -28
index cd11fb28f5..4eb467df5b 100644
@@ -31,7 +31,7 @@
 };
 
 &i2c1 {
-	pmic: pca9450@25 {
+	pmic: pmic@25 {
 		compatible = "nxp,pca9450b";
 		reg = <0x25>;
 		pinctrl-names = "default";
@@ -41,18 +41,18 @@
 
 		regulators {
 			buck1: BUCK1{
-				regulator-name = "BUCK1";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <2187500>;
+				regulator-name = "VDD_SOC";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <950000>;
 				regulator-boot-on;
 				regulator-always-on;
 				regulator-ramp-delay = <3125>;
 			};
 
 			buck2: BUCK2 {
-				regulator-name = "BUCK2";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <2187500>;
+				regulator-name = "VDD_ARM_0V9";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
 				regulator-boot-on;
 				regulator-always-on;
 				regulator-ramp-delay = <3125>;
@@ -61,63 +61,63 @@
 			};
 
 			buck4: BUCK4{
-				regulator-name = "BUCK4";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <3400000>;
+				regulator-name = "VDD_3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
 
 			buck5: BUCK5{
-				regulator-name = "BUCK5";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <3400000>;
+				regulator-name = "VDD_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
 
 			buck6: BUCK6 {
-				regulator-name = "BUCK6";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <3400000>;
+				regulator-name = "NVCC_DRAM_1V1";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
 
 			ldo1: LDO1 {
-				regulator-name = "LDO1";
-				regulator-min-microvolt = <1600000>;
-				regulator-max-microvolt = <3300000>;
+				regulator-name = "NVCC_SNVS_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
 
 			ldo2: LDO2 {
-				regulator-name = "LDO2";
+				regulator-name = "VDD_SNVS_0V8";
 				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1150000>;
+				regulator-max-microvolt = <800000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
 
 			ldo3: LDO3 {
-				regulator-name = "LDO3";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
+				regulator-name = "VDDA_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
 
 			ldo4: LDO4 {
-				regulator-name = "LDO4";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
+				regulator-name = "VDD_PHY_1V2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
 
 			ldo5: LDO5 {
-				regulator-name = "LDO5";
+				regulator-name = "NVCC_SD2";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
board/freescale/imx8mn_evk/spl.c +2 -2
index 0d9909a662..a830407997 100644
@@ -69,9 +69,9 @@ int power_init_board(void)
 	struct udevice *dev;
 	int ret;
 
-	ret = pmic_get("pca9450@25", &dev);
+	ret = pmic_get("pmic@25", &dev);
 	if (ret == -ENODEV) {
-		puts("No pca9450@25\n");
+		puts("No pmci@25\n");
 		return 0;
 	}
 	if (ret != 0)
Signature · 1 line
2.30.2
reviewer Reviewed-by on v2 1/1
#1 lore raw

Hi Heiko,

Quoted 5 lines · Heiko Thiery

Sync dts for imx8mn-evk with Linux Kernel and change name for PMIC used in spl.

This was synced with linux 5.19-rc3 and contains the following changes:

Quoted 8 lines

commit 1cfa1e68af8d40ab233d5d27bc8446e4c5107571("arm64: dts: imx8mn-evk: fix the min/max voltages of the PMIC") commit bc046b952a5494b0dc53be28779460cee1214a3f("arm64: dts: imx8mn-evk: use proper names for PMIC outputs")

---
v2:
- stated the kernel version the sync was done from (thanks Fabio)
- update the patch subject to clarify that changes the evk dts (thanks Tim)

Thanks for the rework. It is clear now: