Skip to contentSkip to conversation

tisdk-uenv: remove uEnv.txt for k3

PATCH In review Andrew Davis 5 participants 8 messages Jun 9, 2022 – Aug 13, 2025

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 tisdk-uenv: remove uEnv.txt for k3

This fixup should have been done in u-boot and not in a uEnv.txt file. It is not correct for all K3 anymore either. Remove it.

---

Changes from v1:
- Subject s/tiusdk-uenv/tisdk-uenv

 .../tisdk-uenv/tisdk-uenv/k3/uEnv.txt         | 19 -------------------
 1 file changed, 19 deletions(-)
 delete mode 100644 meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt
meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt deleted +0 -19
deleted file mode 100644
index 80ea34f5..00000000
@@ -1,19 +0,0 @@
-# This uEnv.txt file can contain additional environment settings that you
-# want to set in U-Boot at boot time.  This can be simple variables such
-# as the serverip or custom variables.  The format of this file is:
-#    variable=value
-# NOTE: This file will be evaluated after the bootcmd is run and the
-#       bootcmd must be set to load this file if it exists (this is the
-#       default on all newer U-Boot images.  This also means that some
-#       variables such as bootdelay cannot be changed by this file since
-#       it is not evaluated until the bootcmd is run.
-
-# The specific board is not able to be automatically detected. The below is a
-# workaround to set a sane default incase the user has not manually configured
-# a specific board.
-def_board_name="am65x"
-
-# Check if using default board_name when name_overlays is not set
-check_for_board=if test $name_overlays; then echo "Using board_name = $board_name"; else setenv board_name $def_board_name; fi
-
-uenvcmd=run check_for_board; run findfdt
Signature · 1 line
2.36.1
#1 lore raw
Quoted 22 lines · Andrew Davis

This fixup should have been done in u-boot and not in a uEnv.txt file. It is not correct for all K3 anymore either. Remove it.

---

Changes from v1:
- Subject s/tiusdk-uenv/tisdk-uenv

 .../tisdk-uenv/tisdk-uenv/k3/uEnv.txt         | 19 -------------------
 1 file changed, 19 deletions(-)
 delete mode 100644

meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt

meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt deleted +0 -0
deleted file mode 100644
index 80ea34f5..00000000

meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt line 10

Quoted 10 lines
meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt deleted +0 -10
@@ -1,19 +0,0 @@
-# This uEnv.txt file can contain additional environment settings that you
-# want to set in U-Boot at boot time.  This can be simple variables such
-# as the serverip or custom variables.  The format of this file is:
-#    variable=value
-# NOTE: This file will be evaluated after the bootcmd is run and the
-#       bootcmd must be set to load this file if it exists (this is the
-#       default on all newer U-Boot images.  This also means that some
-#       variables such as bootdelay cannot be changed by this file since
-#       it is not evaluated until the bootcmd is run.
-

Shouldn't we keep the above, as this is generic information about how to use uEnv.txt and when it is invoked?

Quoted 15 lines
meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt deleted +0 -2
-# The specific board is not able to be automatically detected. The below is a
-# workaround to set a sane default incase the user has not manually

configured

meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt deleted +0 -5
-# a specific board.
-def_board_name="am65x"
-
-# Check if using default board_name when name_overlays is not set
-check_for_board=if test $name_overlays; then echo "Using board_name =

$board_name"; else setenv board_name $def_board_name; fi

meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt deleted +0 -2
-
-uenvcmd=run check_for_board; run findfdt
Signature · 1 line
2.36.1
#2 lore raw

Ryan, I do not see this patch applied to master. Can you check?

Thanks
Jon

-----Original Message-----
From: [email protected] <[email protected]> On Behalf Of Jonathan Humphreys via lists.yoctoproject.org
Sent: Monday, June 13, 2022 11:18 AM
To: [email protected]
Subject: Re: [meta-arago] [dunfell/master][PATCH v2] tisdk-uenv: remove uEnv.txt for k3

Quoted 27 lines · Andrew Davis

This fixup should have been done in u-boot and not in a uEnv.txt file. It is not correct for all K3 anymore either. Remove it.

---

Changes from v1:
- Subject s/tiusdk-uenv/tisdk-uenv

 .../tisdk-uenv/tisdk-uenv/k3/uEnv.txt         | 19 -------------------
 1 file changed, 19 deletions(-)
 delete mode 100644

meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt

(quoted diff) +0 -0

a/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt b/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt deleted file mode 100644
index 80ea34f5..00000000
---
a/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt +++ /dev/null

(quoted diff) +0 -1
@@ -1,19 +0,0 @@
-# This uEnv.txt file can contain additional environment settings that 

you -# want to set in U-Boot at boot time. This can be simple variables such -# as the serverip or custom variables. The format of this file is:

meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt line 10

Quoted 7 lines
meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt deleted +0 -7
-#    variable=value
-# NOTE: This file will be evaluated after the bootcmd is run and the
-#       bootcmd must be set to load this file if it exists (this is the
-#       default on all newer U-Boot images.  This also means that some
-#       variables such as bootdelay cannot be changed by this file since
-#       it is not evaluated until the bootcmd is run.
-

Shouldn't we keep the above, as this is generic information about how to use uEnv.txt and when it is invoked?

Quoted 11 lines

-# The specific board is not able to be automatically detected. The below is a -# workaround to set a sane default incase the user has not manually configured -# a specific board.

meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt deleted +0 -4
-def_board_name="am65x"
-
-# Check if using default board_name when name_overlays is not set 
-check_for_board=if test $name_overlays; then echo "Using board_name = 

$board_name"; else setenv board_name $def_board_name; fi

meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt deleted +0 -3
-
-uenvcmd=run check_for_board; run findfdt
--
Quoted 3 lines

2.36.1

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#13896): https://lists.yoctoproject.org/g/meta-arago/message/13896
Mute This Topic: https://lists.yoctoproject.org/mt/91650730/3617106
Group Owner: [email protected]
Unsubscribe: https://lists.yoctoproject.org/g/meta-arago/unsub [[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-

#3 lore raw

It is not applied in master yet. I have not had time to keep it in sync with dunfell given all of the layer changes. I believe Denys will be doing another sync up soon.

Quoted 75 lines · Jonathan

Ryan, I do not see this patch applied to master. Can you check?

Thanks
Jon

-----Original Message-----
From: [email protected] <[email protected]> On Behalf Of Jonathan Humphreys via lists.yoctoproject.org
Sent: Monday, June 13, 2022 11:18 AM
To: [email protected]
Subject: Re: [meta-arago] [dunfell/master][PATCH v2] tisdk-uenv: remove uEnv.txt for k3

Quoted 27 lines · Andrew Davis

This fixup should have been done in u-boot and not in a uEnv.txt file. It is not correct for all K3 anymore either. Remove it.

---

Changes from v1:
- Subject s/tiusdk-uenv/tisdk-uenv

  .../tisdk-uenv/tisdk-uenv/k3/uEnv.txt         | 19 -------------------
  1 file changed, 19 deletions(-)

delete mode 100644
meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt

diff --git a/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt b/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt deleted file mode 100644
index 80ea34f5..00000000
---
a/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt +++ /dev/null

(quoted diff) +0 -1
@@ -1,19 +0,0 @@
-# This uEnv.txt file can contain additional environment settings that

you -# want to set in U-Boot at boot time. This can be simple variables such -# as the serverip or custom variables. The format of this file is:

meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt line 10

Quoted 7 lines
meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt deleted +0 -7
-#    variable=value
-# NOTE: This file will be evaluated after the bootcmd is run and the
-#       bootcmd must be set to load this file if it exists (this is the
-#       default on all newer U-Boot images.  This also means that some
-#       variables such as bootdelay cannot be changed by this file since
-#       it is not evaluated until the bootcmd is run.
-

Shouldn't we keep the above, as this is generic information about how to use uEnv.txt and when it is invoked?

Quoted 11 lines

-# The specific board is not able to be automatically detected. The below is a -# workaround to set a sane default incase the user has not manually configured -# a specific board.

meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt deleted +0 -4
-def_board_name="am65x"
-
-# Check if using default board_name when name_overlays is not set
-check_for_board=if test $name_overlays; then echo "Using board_name =

$board_name"; else setenv board_name $def_board_name; fi

meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt deleted +0 -3
-
-uenvcmd=run check_for_board; run findfdt
--
Quoted 3 lines

2.36.1

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#13896): https://lists.yoctoproject.org/g/meta-arago/message/13896
Mute This Topic: https://lists.yoctoproject.org/mt/91650730/3617106
Group Owner: [email protected]
Unsubscribe: https://lists.yoctoproject.org/g/meta-arago/unsub [[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-

Signature · 3 lines
Ryan Eatmon                [email protected]
-----------------------------------------
Texas Instruments, Inc.  -  LCPD  -  MGTS
#4 lore raw

I don't think the layer changes will have any impact on it.

+Denys

-----Original Message-----
From: Eatmon, Ryan <[email protected]>
Sent: Monday, June 27, 2022 11:00 AM
To: Humphreys, Jonathan <[email protected]>; [email protected]
Subject: Re: [meta-arago] [dunfell/master][PATCH v2] tisdk-uenv: remove uEnv.txt for k3

It is not applied in master yet. I have not had time to keep it in sync with dunfell given all of the layer changes. I believe Denys will be doing another sync up soon.

Quoted 80 lines · Jonathan

Ryan, I do not see this patch applied to master. Can you check?

Thanks
Jon

-----Original Message-----
From: [email protected] <[email protected]> On Behalf Of Jonathan Humphreys via lists.yoctoproject.org
Sent: Monday, June 13, 2022 11:18 AM
To: [email protected]
Subject: Re: [meta-arago] [dunfell/master][PATCH v2] tisdk-uenv:
remove uEnv.txt for k3

Quoted 27 lines · Andrew Davis

This fixup should have been done in u-boot and not in a uEnv.txt file. It is not correct for all K3 anymore either. Remove it.

---

Changes from v1:
- Subject s/tiusdk-uenv/tisdk-uenv

  .../tisdk-uenv/tisdk-uenv/k3/uEnv.txt         | 19 -------------------
  1 file changed, 19 deletions(-)

delete mode 100644
meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt

diff --git a/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt b/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt deleted file mode 100644
index 80ea34f5..00000000
---
a/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt +++ /dev/null

(quoted diff) +0 -1
@@ -1,19 +0,0 @@
-# This uEnv.txt file can contain additional environment settings 

that you -# want to set in U-Boot at boot time. This can be simple variables such -# as the serverip or custom variables. The format of this file is:

meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt line 10

Quoted 7 lines
meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt deleted +0 -7
-#    variable=value
-# NOTE: This file will be evaluated after the bootcmd is run and the
-#       bootcmd must be set to load this file if it exists (this is the
-#       default on all newer U-Boot images.  This also means that some
-#       variables such as bootdelay cannot be changed by this file since
-#       it is not evaluated until the bootcmd is run.
-

Shouldn't we keep the above, as this is generic information about how to use uEnv.txt and when it is invoked?

Quoted 11 lines

-# The specific board is not able to be automatically detected. The below is a -# workaround to set a sane default incase the user has not manually configured -# a specific board.

meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt deleted +0 -4
-def_board_name="am65x"
-
-# Check if using default board_name when name_overlays is not set 
-check_for_board=if test $name_overlays; then echo "Using board_name 

= $board_name"; else setenv board_name $def_board_name; fi

meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt deleted +0 -3
-
-uenvcmd=run check_for_board; run findfdt
--
Quoted 3 lines

2.36.1

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group. View/Reply Online (#13896):
https://lists.yoctoproject.org/g/meta-arago/message/13896
Mute This Topic: https://lists.yoctoproject.org/mt/91650730/3617106
Group Owner: [email protected]
Unsubscribe: https://lists.yoctoproject.org/g/meta-arago/unsub
[[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-

Signature · 3 lines
Ryan Eatmon                [email protected]
-----------------------------------------
Texas Instruments, Inc.  -  LCPD  -  MGTS
#5 lore raw

Not this one, but there are a number of other patches in line before it that might be.

Quoted 98 lines · Jonathan

I don't think the layer changes will have any impact on it.

+Denys

-----Original Message-----
From: Eatmon, Ryan <[email protected]>
Sent: Monday, June 27, 2022 11:00 AM
To: Humphreys, Jonathan <[email protected]>; [email protected]
Subject: Re: [meta-arago] [dunfell/master][PATCH v2] tisdk-uenv: remove uEnv.txt for k3

It is not applied in master yet. I have not had time to keep it in sync with dunfell given all of the layer changes. I believe Denys will be doing another sync up soon.

Quoted 80 lines · Jonathan

Ryan, I do not see this patch applied to master. Can you check?

Thanks
Jon

-----Original Message-----
From: [email protected] <[email protected]> On Behalf Of Jonathan Humphreys via lists.yoctoproject.org
Sent: Monday, June 13, 2022 11:18 AM
To: [email protected]
Subject: Re: [meta-arago] [dunfell/master][PATCH v2] tisdk-uenv:
remove uEnv.txt for k3

Quoted 27 lines · Andrew Davis

This fixup should have been done in u-boot and not in a uEnv.txt file. It is not correct for all K3 anymore either. Remove it.

---

Changes from v1:
- Subject s/tiusdk-uenv/tisdk-uenv

   .../tisdk-uenv/tisdk-uenv/k3/uEnv.txt         | 19 -------------------
   1 file changed, 19 deletions(-)

delete mode 100644
meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt

diff --git a/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt b/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt deleted file mode 100644
index 80ea34f5..00000000
---
a/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt +++ /dev/null

(quoted diff) +0 -1
@@ -1,19 +0,0 @@
-# This uEnv.txt file can contain additional environment settings

that you -# want to set in U-Boot at boot time. This can be simple variables such -# as the serverip or custom variables. The format of this file is:

meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt line 10

Quoted 7 lines
meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt deleted +0 -7
-#    variable=value
-# NOTE: This file will be evaluated after the bootcmd is run and the
-#       bootcmd must be set to load this file if it exists (this is the
-#       default on all newer U-Boot images.  This also means that some
-#       variables such as bootdelay cannot be changed by this file since
-#       it is not evaluated until the bootcmd is run.
-

Shouldn't we keep the above, as this is generic information about how to use uEnv.txt and when it is invoked?

Quoted 11 lines

-# The specific board is not able to be automatically detected. The below is a -# workaround to set a sane default incase the user has not manually configured -# a specific board.

meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt deleted +0 -4
-def_board_name="am65x"
-
-# Check if using default board_name when name_overlays is not set
-check_for_board=if test $name_overlays; then echo "Using board_name

= $board_name"; else setenv board_name $def_board_name; fi

meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt deleted +0 -3
-
-uenvcmd=run check_for_board; run findfdt
--
Quoted 3 lines

2.36.1

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group. View/Reply Online (#13896):
https://lists.yoctoproject.org/g/meta-arago/message/13896
Mute This Topic: https://lists.yoctoproject.org/mt/91650730/3617106
Group Owner: [email protected]
Unsubscribe: https://lists.yoctoproject.org/g/meta-arago/unsub
[[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-

Signature · 3 lines
Ryan Eatmon                [email protected]
-----------------------------------------
Texas Instruments, Inc.  -  LCPD  -  MGTS
#6 lore raw

Jon,

This particular change is rather trivial, indeed.

Other changes are more involved due to override syntax change and meta-ti restructure. I am collecting recent changes in Dunfell and will do another sync with Kirkstone/master soon.

Signature · 1 line
Denys
Quoted 88 lines · Ryan Eatmon via lists.yoctoproject.org

Not this one, but there are a number of other patches in line before it that might be.

Quoted 82 lines · Jonathan

I don't think the layer changes will have any impact on it.

+Denys

-----Original Message-----
From: Eatmon, Ryan <[email protected]>
Sent: Monday, June 27, 2022 11:00 AM
To: Humphreys, Jonathan <[email protected]>; [email protected]
Subject: Re: [meta-arago] [dunfell/master][PATCH v2] tisdk-uenv: remove uEnv.txt for k3

It is not applied in master yet. I have not had time to keep it in sync with dunfell given all of the layer changes. I believe Denys will be doing another sync up soon.

Quoted 65 lines · Jonathan

Ryan, I do not see this patch applied to master. Can you check?

Thanks
Jon

-----Original Message-----
From: [email protected] <[email protected]> On Behalf Of Jonathan Humphreys via lists.yoctoproject.org
Sent: Monday, June 13, 2022 11:18 AM
To: [email protected]
Subject: Re: [meta-arago] [dunfell/master][PATCH v2] tisdk-uenv:
remove uEnv.txt for k3

Quoted 27 lines · Andrew Davis

This fixup should have been done in u-boot and not in a uEnv.txt file. It is not correct for all K3 anymore either. Remove it.

---

Changes from v1:
- Subject s/tiusdk-uenv/tisdk-uenv

  .../tisdk-uenv/tisdk-uenv/k3/uEnv.txt         | 19 -------------------
  1 file changed, 19 deletions(-)

delete mode 100644
meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt

diff --git a/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt b/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt deleted file mode 100644
index 80ea34f5..00000000
---
a/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt +++ /dev/null

(quoted diff) +0 -1
@@ -1,19 +0,0 @@
-# This uEnv.txt file can contain additional environment settings

that you -# want to set in U-Boot at boot time. This can be simple variables such -# as the serverip or custom variables. The format of this file is:

meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt line 10

Quoted 7 lines
meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt deleted +0 -7
-#    variable=value
-# NOTE: This file will be evaluated after the bootcmd is run and the
-#       bootcmd must be set to load this file if it exists (this is the
-#       default on all newer U-Boot images.  This also means that some
-#       variables such as bootdelay cannot be changed by this file since
-#       it is not evaluated until the bootcmd is run.
-

Shouldn't we keep the above, as this is generic information about how to use uEnv.txt and when it is invoked?

Quoted 12 lines

-# The specific board is not able to be automatically detected. The below is a -# workaround to set a sane default incase the user has not manually configured -# a specific board.

meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt deleted +0 -4
-def_board_name="am65x"
-
-# Check if using default board_name when name_overlays is not set
-check_for_board=if test $name_overlays; then echo "Using board_name

= $board_name"; else setenv board_name $def_board_name; fi

meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt deleted +0 -3
-
-uenvcmd=run check_for_board; run findfdt
--

2.36.1

#7 lore raw

Re: [meta-arago][dunfell/master][PATCH v2] tisdk-uenv: remove uEnv.txt

In reply to Andrew Davis

meta-arago / na / 20220609170520.31162-1-afd

PRC Results: FAIL

=========================================================
check-yocto-patches: PASS
=========================================================
Patches
----------------------------------------
All patches passed

=========================================================
apply-yocto-patch: FAIL
=========================================================
dunfell
=====================
Summary:
- Patch Series: [meta-arago][dunfell/master][PATCH v2] tisdk-uenv: remove uEnv.txt for k3
- Submitter: From: Andrew Davis <[email protected]>
- Date: Date: Thu, 9 Jun 2022 12:05:20 -0500
- Num Patches: 1
- Mailing List (public inbox) Commit SHA: 8da349cb70fe1f8fe4aeea255ccd9fea800459c5

Applied to:
- Repository: lcpd-prc-meta-arago
- Base Branch: dunfell
- Commit Author: Randolph Sapp <[email protected]>
- Commit Subject: meta-arago-distro: linux-firmware: remove cadence firmware
- Commit SHA: 86d19ced20934c8383c8a39f88d97c72e7e929ee

Patches
----------------------------------------
FAIL - [meta-arago][dunfell/master][PATCH v2] tisdk-uenv: remove uEnv.txt for k3
Applying: tisdk-uenv: remove uEnv.txt for k3
Patch failed at 0001 tisdk-uenv: remove uEnv.txt for k3
error: meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt: does not exist in index

master
=====================
Summary:
- Patch Series: [meta-arago][dunfell/master][PATCH v2] tisdk-uenv: remove uEnv.txt for k3
- Submitter: From: Andrew Davis <[email protected]>
- Date: Date: Thu, 9 Jun 2022 12:05:20 -0500
- Num Patches: 1
- Mailing List (public inbox) Commit SHA: 8da349cb70fe1f8fe4aeea255ccd9fea800459c5

Applied to:
- Repository: lcpd-prc-meta-arago
- Base Branch: master
- Commit Author: LCPD Automation Script <[email protected]>
- Commit Subject: CI/CD Auto-Merger: cicd.master.202508010100
- Commit SHA: 644f8b47f0eef26bda636717f5838871ec67d138

Patches
----------------------------------------
FAIL - [meta-arago][dunfell/master][PATCH v2] tisdk-uenv: remove uEnv.txt for k3
Applying: tisdk-uenv: remove uEnv.txt for k3
Patch failed at 0001 tisdk-uenv: remove uEnv.txt for k3
error: meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt: does not exist in index