tisdk-uenv: remove uEnv.txt for k3
PATCH v2 1/1 tisdk-uenv: remove uEnv.txt for k3
This fixup should have been done in u-boot and not in a uEnv.txt file. It is not correct for all K3 anymore either. Remove it.
---
Changes from v1:
- Subject s/tiusdk-uenv/tisdk-uenv
.../tisdk-uenv/tisdk-uenv/k3/uEnv.txt | 19 ------------------- 1 file changed, 19 deletions(-) delete mode 100644 meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt
meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt deleted +0 -19
@@ -1,19 +0,0 @@ -# This uEnv.txt file can contain additional environment settings that you -# want to set in U-Boot at boot time. This can be simple variables such -# as the serverip or custom variables. The format of this file is: -# variable=value -# NOTE: This file will be evaluated after the bootcmd is run and the -# bootcmd must be set to load this file if it exists (this is the -# default on all newer U-Boot images. This also means that some -# variables such as bootdelay cannot be changed by this file since -# it is not evaluated until the bootcmd is run. - -# The specific board is not able to be automatically detected. The below is a -# workaround to set a sane default incase the user has not manually configured -# a specific board. -def_board_name="am65x" - -# Check if using default board_name when name_overlays is not set -check_for_board=if test $name_overlays; then echo "Using board_name = $board_name"; else setenv board_name $def_board_name; fi - -uenvcmd=run check_for_board; run findfdt
Signature · 1 line
2.36.1
Quoted 22 lines · Andrew Davis
This fixup should have been done in u-boot and not in a uEnv.txt file. It is not correct for all K3 anymore either. Remove it.
Signed-off-by Andrew Davis <[email protected]>---
Changes from v1:
- Subject s/tiusdk-uenv/tisdk-uenv.../tisdk-uenv/tisdk-uenv/k3/uEnv.txt | 19 ------------------- 1 file changed, 19 deletions(-) delete mode 100644
meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txtmeta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt deleted +0
-0
meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt line 10
Quoted 10 lines
meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt deleted +0
-10@@ -1,19 +0,0 @@ -# This uEnv.txt file can contain additional environment settings that you -# want to set in U-Boot at boot time. This can be simple variables such -# as the serverip or custom variables. The format of this file is: -# variable=value -# NOTE: This file will be evaluated after the bootcmd is run and the -# bootcmd must be set to load this file if it exists (this is the -# default on all newer U-Boot images. This also means that some -# variables such as bootdelay cannot be changed by this file since -# it is not evaluated until the bootcmd is run. -
Shouldn't we keep the above, as this is generic information about how to use uEnv.txt and when it is invoked?
Quoted 15 lines
meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt deleted +0
-2-# The specific board is not able to be automatically detected. The below is a -# workaround to set a sane default incase the user has not manuallyconfigured
meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt deleted +0
-5-# a specific board. -def_board_name="am65x" - -# Check if using default board_name when name_overlays is not set -check_for_board=if test $name_overlays; then echo "Using board_name =$board_name"; else setenv
board_name$def_board_name; fimeta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt deleted +0
-2- -uenvcmd=run check_for_board; run findfdtSignature · 1 line
2.36.1
Ryan, I do not see this patch applied to master. Can you check?
Thanks
Jon
-----Original Message-----
From: [email protected] <[email protected]> On Behalf Of Jonathan Humphreys via lists.yoctoproject.org
Sent: Monday, June 13, 2022 11:18 AM
To: [email protected]
Subject: Re: [meta-arago] [dunfell/master][PATCH v2] tisdk-uenv: remove uEnv.txt for k3
Quoted 27 lines · Andrew Davis
This fixup should have been done in u-boot and not in a uEnv.txt file. It is not correct for all K3 anymore either. Remove it.
Signed-off-by Andrew Davis <[email protected]>---
Changes from v1:
- Subject s/tiusdk-uenv/tisdk-uenv.../tisdk-uenv/tisdk-uenv/k3/uEnv.txt | 19 ------------------- 1 file changed, 19 deletions(-) delete mode 100644
meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt(quoted diff) +0
-0
a/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txtb/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txtdeleted file mode 100644
index 80ea34f5..00000000
---a/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt+++/dev/null(quoted diff) +0
-1@@ -1,19 +0,0 @@ -# This uEnv.txt file can contain additional environment settings thatyou -# want to set in U-Boot at boot time. This can be simple variables such -# as the serverip or custom variables. The format of this file is:
meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt line 10
Quoted 7 lines
meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt deleted +0
-7-# variable=value -# NOTE: This file will be evaluated after the bootcmd is run and the -# bootcmd must be set to load this file if it exists (this is the -# default on all newer U-Boot images. This also means that some -# variables such as bootdelay cannot be changed by this file since -# it is not evaluated until the bootcmd is run. -
Shouldn't we keep the above, as this is generic information about how to use uEnv.txt and when it is invoked?
Quoted 11 lines
-# The specific board is not able to be automatically detected. The below is a -# workaround to set a sane default incase the user has not manually configured -# a specific board.
meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt deleted +0
-4-def_board_name="am65x" - -# Check if using default board_name when name_overlays is not set -check_for_board=if test $name_overlays; then echo "Using board_name =$board_name"; else setenv
board_name$def_board_name; fimeta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt deleted +0
-3- -uenvcmd=run check_for_board; run findfdt --
Quoted 3 lines
2.36.1
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#13896): https://lists.yoctoproject.org/g/meta-arago/message/13896
Mute This Topic: https://lists.yoctoproject.org/mt/91650730/3617106
Group Owner: [email protected]
Unsubscribe: https://lists.yoctoproject.org/g/meta-arago/unsub [[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-
It is not applied in master yet. I have not had time to keep it in sync with dunfell given all of the layer changes. I believe Denys will be doing another sync up soon.
Quoted 75 lines · Jonathan
Ryan, I do not see this patch applied to master. Can you check?
Thanks
Jon-----Original Message-----
From: [email protected] <[email protected]> On Behalf Of Jonathan Humphreys via lists.yoctoproject.org
Sent: Monday, June 13, 2022 11:18 AM
To: [email protected]
Subject: Re: [meta-arago] [dunfell/master][PATCH v2] tisdk-uenv: remove uEnv.txt for k3Quoted 27 lines · Andrew Davis
This fixup should have been done in u-boot and not in a uEnv.txt file. It is not correct for all K3 anymore either. Remove it.
Signed-off-by Andrew Davis <[email protected]>---
Changes from v1:
- Subject s/tiusdk-uenv/tisdk-uenv.../tisdk-uenv/tisdk-uenv/k3/uEnv.txt | 19 ------------------- 1 file changed, 19 deletions(-)delete mode 100644
meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txtdiff --git
a/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txtb/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txtdeleted file mode 100644
index 80ea34f5..00000000
---a/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt+++/dev/null(quoted diff) +0
-1@@ -1,19 +0,0 @@ -# This uEnv.txt file can contain additional environment settings thatyou -# want to set in U-Boot at boot time. This can be simple variables such -# as the serverip or custom variables. The format of this file is:
meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt line 10
Quoted 7 lines
meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt deleted +0
-7-# variable=value -# NOTE: This file will be evaluated after the bootcmd is run and the -# bootcmd must be set to load this file if it exists (this is the -# default on all newer U-Boot images. This also means that some -# variables such as bootdelay cannot be changed by this file since -# it is not evaluated until the bootcmd is run. -Shouldn't we keep the above, as this is generic information about how to use uEnv.txt and when it is invoked?
Quoted 11 lines
-# The specific board is not able to be automatically detected. The below is a -# workaround to set a sane default incase the user has not manually configured -# a specific board.
meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt deleted +0
-4-def_board_name="am65x" - -# Check if using default board_name when name_overlays is not set -check_for_board=if test $name_overlays; then echo "Using board_name =$board_name"; else setenv
board_name$def_board_name; fimeta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt deleted +0
-3- -uenvcmd=run check_for_board; run findfdt --Quoted 3 lines
2.36.1
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#13896): https://lists.yoctoproject.org/g/meta-arago/message/13896
Mute This Topic: https://lists.yoctoproject.org/mt/91650730/3617106
Group Owner: [email protected]
Unsubscribe: https://lists.yoctoproject.org/g/meta-arago/unsub [[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-
Signature · 3 lines
Ryan Eatmon [email protected] ----------------------------------------- Texas Instruments, Inc. - LCPD - MGTS
I don't think the layer changes will have any impact on it.
+Denys
-----Original Message-----
From: Eatmon, Ryan <[email protected]>
Sent: Monday, June 27, 2022 11:00 AM
To: Humphreys, Jonathan <[email protected]>; [email protected]
Subject: Re: [meta-arago] [dunfell/master][PATCH v2] tisdk-uenv: remove uEnv.txt for k3
It is not applied in master yet. I have not had time to keep it in sync with dunfell given all of the layer changes. I believe Denys will be doing another sync up soon.
Quoted 80 lines · Jonathan
Ryan, I do not see this patch applied to master. Can you check?
Thanks
Jon-----Original Message-----
From: [email protected] <[email protected]> On Behalf Of Jonathan Humphreys via lists.yoctoproject.org
Sent: Monday, June 13, 2022 11:18 AM
To: [email protected]
Subject: Re: [meta-arago] [dunfell/master][PATCH v2] tisdk-uenv:
remove uEnv.txt for k3Quoted 27 lines · Andrew Davis
This fixup should have been done in u-boot and not in a uEnv.txt file. It is not correct for all K3 anymore either. Remove it.
Signed-off-by Andrew Davis <[email protected]>---
Changes from v1:
- Subject s/tiusdk-uenv/tisdk-uenv.../tisdk-uenv/tisdk-uenv/k3/uEnv.txt | 19 ------------------- 1 file changed, 19 deletions(-)delete mode 100644
meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txtdiff --git
a/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txtb/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txtdeleted file mode 100644
index 80ea34f5..00000000
---a/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt+++/dev/null(quoted diff) +0
-1@@ -1,19 +0,0 @@ -# This uEnv.txt file can contain additional environment settingsthat you -# want to set in U-Boot at boot time. This can be simple variables such -# as the serverip or custom variables. The format of this file is:
meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt line 10
Quoted 7 lines
meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt deleted +0
-7-# variable=value -# NOTE: This file will be evaluated after the bootcmd is run and the -# bootcmd must be set to load this file if it exists (this is the -# default on all newer U-Boot images. This also means that some -# variables such as bootdelay cannot be changed by this file since -# it is not evaluated until the bootcmd is run. -Shouldn't we keep the above, as this is generic information about how to use uEnv.txt and when it is invoked?
Quoted 11 lines
-# The specific board is not able to be automatically detected. The below is a -# workaround to set a sane default incase the user has not manually configured -# a specific board.
meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt deleted +0
-4-def_board_name="am65x" - -# Check if using default board_name when name_overlays is not set -check_for_board=if test $name_overlays; then echo "Using board_name= $board_name"; else setenv
board_name$def_board_name; fimeta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt deleted +0
-3- -uenvcmd=run check_for_board; run findfdt --Quoted 3 lines
2.36.1
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group. View/Reply Online (#13896):
https://lists.yoctoproject.org/g/meta-arago/message/13896
Mute This Topic: https://lists.yoctoproject.org/mt/91650730/3617106
Group Owner: [email protected]
Unsubscribe: https://lists.yoctoproject.org/g/meta-arago/unsub
[[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-
Signature · 3 lines
Ryan Eatmon [email protected] ----------------------------------------- Texas Instruments, Inc. - LCPD - MGTS
Not this one, but there are a number of other patches in line before it that might be.
Quoted 98 lines · Jonathan
I don't think the layer changes will have any impact on it.
+Denys
-----Original Message-----
From: Eatmon, Ryan <[email protected]>
Sent: Monday, June 27, 2022 11:00 AM
To: Humphreys, Jonathan <[email protected]>; [email protected]
Subject: Re: [meta-arago] [dunfell/master][PATCH v2] tisdk-uenv: remove uEnv.txt for k3It is not applied in master yet. I have not had time to keep it in sync with dunfell given all of the layer changes. I believe Denys will be doing another sync up soon.
Quoted 80 lines · Jonathan
Ryan, I do not see this patch applied to master. Can you check?
Thanks
Jon-----Original Message-----
From: [email protected] <[email protected]> On Behalf Of Jonathan Humphreys via lists.yoctoproject.org
Sent: Monday, June 13, 2022 11:18 AM
To: [email protected]
Subject: Re: [meta-arago] [dunfell/master][PATCH v2] tisdk-uenv:
remove uEnv.txt for k3Quoted 27 lines · Andrew Davis
This fixup should have been done in u-boot and not in a uEnv.txt file. It is not correct for all K3 anymore either. Remove it.
Signed-off-by Andrew Davis <[email protected]>---
Changes from v1:
- Subject s/tiusdk-uenv/tisdk-uenv.../tisdk-uenv/tisdk-uenv/k3/uEnv.txt | 19 ------------------- 1 file changed, 19 deletions(-)delete mode 100644
meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txtdiff --git
a/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txtb/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txtdeleted file mode 100644
index 80ea34f5..00000000
---a/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt+++/dev/null(quoted diff) +0
-1@@ -1,19 +0,0 @@ -# This uEnv.txt file can contain additional environment settingsthat you -# want to set in U-Boot at boot time. This can be simple variables such -# as the serverip or custom variables. The format of this file is:
meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt line 10
Quoted 7 lines
meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt deleted +0
-7-# variable=value -# NOTE: This file will be evaluated after the bootcmd is run and the -# bootcmd must be set to load this file if it exists (this is the -# default on all newer U-Boot images. This also means that some -# variables such as bootdelay cannot be changed by this file since -# it is not evaluated until the bootcmd is run. -Shouldn't we keep the above, as this is generic information about how to use uEnv.txt and when it is invoked?
Quoted 11 lines
-# The specific board is not able to be automatically detected. The below is a -# workaround to set a sane default incase the user has not manually configured -# a specific board.
meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt deleted +0
-4-def_board_name="am65x" - -# Check if using default board_name when name_overlays is not set -check_for_board=if test $name_overlays; then echo "Using board_name= $board_name"; else setenv
board_name$def_board_name; fimeta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt deleted +0
-3- -uenvcmd=run check_for_board; run findfdt --Quoted 3 lines
2.36.1
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group. View/Reply Online (#13896):
https://lists.yoctoproject.org/g/meta-arago/message/13896
Mute This Topic: https://lists.yoctoproject.org/mt/91650730/3617106
Group Owner: [email protected]
Unsubscribe: https://lists.yoctoproject.org/g/meta-arago/unsub
[[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-
Signature · 3 lines
Ryan Eatmon [email protected] ----------------------------------------- Texas Instruments, Inc. - LCPD - MGTS
Jon,
This particular change is rather trivial, indeed.
Other changes are more involved due to override syntax change and meta-ti restructure. I am collecting recent changes in Dunfell and will do another sync with Kirkstone/master soon.
Signature · 1 line
Denys
Quoted 88 lines · Ryan Eatmon via lists.yoctoproject.org
Not this one, but there are a number of other patches in line before it that might be.
Quoted 82 lines · Jonathan
I don't think the layer changes will have any impact on it.
+Denys
-----Original Message-----
From: Eatmon, Ryan <[email protected]>
Sent: Monday, June 27, 2022 11:00 AM
To: Humphreys, Jonathan <[email protected]>; [email protected]
Subject: Re: [meta-arago] [dunfell/master][PATCH v2] tisdk-uenv: remove uEnv.txt for k3It is not applied in master yet. I have not had time to keep it in sync with dunfell given all of the layer changes. I believe Denys will be doing another sync up soon.
Quoted 65 lines · Jonathan
Ryan, I do not see this patch applied to master. Can you check?
Thanks
Jon-----Original Message-----
From: [email protected] <[email protected]> On Behalf Of Jonathan Humphreys via lists.yoctoproject.org
Sent: Monday, June 13, 2022 11:18 AM
To: [email protected]
Subject: Re: [meta-arago] [dunfell/master][PATCH v2] tisdk-uenv:
remove uEnv.txt for k3Quoted 27 lines · Andrew Davis
This fixup should have been done in u-boot and not in a uEnv.txt file. It is not correct for all K3 anymore either. Remove it.
Signed-off-by Andrew Davis <[email protected]>---
Changes from v1:
- Subject s/tiusdk-uenv/tisdk-uenv.../tisdk-uenv/tisdk-uenv/k3/uEnv.txt | 19 ------------------- 1 file changed, 19 deletions(-)delete mode 100644
meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txtdiff --git
a/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txtb/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txtdeleted file mode 100644
index 80ea34f5..00000000
---a/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt+++/dev/null(quoted diff) +0
-1@@ -1,19 +0,0 @@ -# This uEnv.txt file can contain additional environment settingsthat you -# want to set in U-Boot at boot time. This can be simple variables such -# as the serverip or custom variables. The format of this file is:
meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt line 10
Quoted 7 lines
meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt deleted +0
-7-# variable=value -# NOTE: This file will be evaluated after the bootcmd is run and the -# bootcmd must be set to load this file if it exists (this is the -# default on all newer U-Boot images. This also means that some -# variables such as bootdelay cannot be changed by this file since -# it is not evaluated until the bootcmd is run. -Shouldn't we keep the above, as this is generic information about how to use uEnv.txt and when it is invoked?
Quoted 12 lines
-# The specific board is not able to be automatically detected. The below is a -# workaround to set a sane default incase the user has not manually configured -# a specific board.
meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt deleted +0
-4-def_board_name="am65x" - -# Check if using default board_name when name_overlays is not set -check_for_board=if test $name_overlays; then echo "Using board_name= $board_name"; else setenv
board_name$def_board_name; fimeta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt deleted +0
-3- -uenvcmd=run check_for_board; run findfdt --2.36.1
Re: [meta-arago][dunfell/master][PATCH v2] tisdk-uenv: remove uEnv.txt
In reply to Andrew Davismeta-arago / na / 20220609170520.31162-1-afd
PRC Results: FAIL
=========================================================
check-yocto-patches: PASS
=========================================================
Patches
----------------------------------------
All patches passed
=========================================================
apply-yocto-patch: FAIL
=========================================================
dunfell
=====================
Summary:
- Patch Series: [meta-arago][dunfell/master][PATCH v2] tisdk-uenv: remove uEnv.txt for k3
- Submitter: From: Andrew Davis <[email protected]>
- Date: Date: Thu, 9 Jun 2022 12:05:20 -0500
- Num Patches: 1
- Mailing List (public inbox) Commit SHA: 8da349cb70fe1f8fe4aeea255ccd9fea800459c5
Applied to:
- Repository: lcpd-prc-meta-arago
- Base Branch: dunfell
- Commit Author: Randolph Sapp <[email protected]>
- Commit Subject: meta-arago-distro: linux-firmware: remove cadence firmware
- Commit SHA: 86d19ced20934c8383c8a39f88d97c72e7e929ee
Patches
----------------------------------------
FAIL - [meta-arago][dunfell/master][PATCH v2] tisdk-uenv: remove uEnv.txt for k3
Applying: tisdk-uenv: remove uEnv.txt for k3
Patch failed at 0001 tisdk-uenv: remove uEnv.txt for k3
error: meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt: does not exist in index
master
=====================
Summary:
- Patch Series: [meta-arago][dunfell/master][PATCH v2] tisdk-uenv: remove uEnv.txt for k3
- Submitter: From: Andrew Davis <[email protected]>
- Date: Date: Thu, 9 Jun 2022 12:05:20 -0500
- Num Patches: 1
- Mailing List (public inbox) Commit SHA: 8da349cb70fe1f8fe4aeea255ccd9fea800459c5
Applied to:
- Repository: lcpd-prc-meta-arago
- Base Branch: master
- Commit Author: LCPD Automation Script <[email protected]>
- Commit Subject: CI/CD Auto-Merger: cicd.master.202508010100
- Commit SHA: 644f8b47f0eef26bda636717f5838871ec67d138
Patches
----------------------------------------
FAIL - [meta-arago][dunfell/master][PATCH v2] tisdk-uenv: remove uEnv.txt for k3
Applying: tisdk-uenv: remove uEnv.txt for k3
Patch failed at 0001 tisdk-uenv: remove uEnv.txt for k3
error: meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/k3/uEnv.txt: does not exist in index