dt-bindings: mmc: sdhci-msm: document resets
PATCH v2 1/2 dt-bindings: mmc: sdhci-msm: document resets
Commit "mmc: sdhci-msm: Reset GCC_SDCC_BCR register for SDHC" added support for utilizing a hardware reset and parsing it from DT, however the bindings were not updated along with it.
So, document the usage of "resets" property with the limit of only one item.
--- Documentation/devicetree/bindings/mmc/sdhci-msm.yaml | 3 +++ 1 file changed, 3 insertions(+)
Documentation/devicetree/bindings/mmc/sdhci-msm.yaml +3 -0
@@ -116,6 +116,9 @@ properties: description: Should specify pin control groups used for this controller. + resets: + maxItems: 1 + qcom,ddr-config: $ref: /schemas/types.yaml#/definitions/uint32 description: platform specific settings for DDR_CONFIG reg.
Signature · 1 line
2.36.1
PATCH v2 2/2 arm64: dts: ipq8074: add reset to SDHCI
Add reset to SDHCI controller so it can be reset to avoid timeout issues after software reset due to bootloader set configuration.
--- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 1 + 1 file changed, 1 insertion(+)
arch/arm64/boot/dts/qcom/ipq8074.dtsi +1 -0
@@ -482,6 +482,7 @@ sdhc_1: mmc@7824900 { <&gcc GCC_SDCC1_APPS_CLK>, <&xo>; clock-names = "iface", "core", "xo"; + resets = <&gcc GCC_SDCC1_BCR>; max-frequency = <384000000>; mmc-ddr-1_8v; mmc-hs200-1_8v;
Signature · 1 line
2.36.1
Re: [PATCH v2 2/2] arm64: dts: ipq8074: add reset to SDHCI
Quoted 4 lines · Robert Marko
Add reset to SDHCI controller so it can be reset to avoid timeout issues after software reset due to bootloader set configuration.
Signed-off-by Robert Marko <[email protected]>
Best regards,
Krzysztof
Re: [PATCH v2 2/2] arm64: dts: ipq8074: add reset to SDHCI
In reply to Robert MarkoQuoted 5 lines · Robert Marko
Add reset to SDHCI controller so it can be reset to avoid timeout issues after software reset due to bootloader set configuration.
Signed-off-by Robert Marko <[email protected]>---
Konrad
Bjorn Andersson
AppliedRe: (subset) [PATCH v2 2/2] arm64: dts: ipq8074: add reset to SDHCI
In reply to Robert MarkoQuoted 4 lines · Robert Marko
Add reset to SDHCI controller so it can be reset to avoid timeout issues after software reset due to bootloader set configuration.
Applied, thanks!
[2/2] arm64: dts: ipq8074: add reset to SDHCI
commit: 730d55d861c63647df3cc9f77904a01c6719201b
Best regards,
Signature · 1 line
Bjorn Andersson <[email protected]>
Quoted 8 lines · Robert Marko
Commit "mmc: sdhci-msm: Reset
GCC_SDCC_BCRregister for SDHC" added support for utilizing a hardware reset and parsing it from DT, however the bindings were not updated along with it.So, document the usage of "resets" property with the limit of only one item.
Signed-off-by Robert Marko <[email protected]>
Best regards,
Krzysztof
Quoted 9 lines · Robert Marko
Commit "mmc: sdhci-msm: Reset
GCC_SDCC_BCRregister for SDHC" added support for utilizing a hardware reset and parsing it from DT, however the bindings were not updated along with it.So, document the usage of "resets" property with the limit of only one item.
Signed-off-by Robert Marko <[email protected]>
Applied for next, thanks!
Kind regards
Uffe
Quoted 21 lines
--- Documentation/devicetree/bindings/mmc/sdhci-msm.yaml | 3 +++ 1 file changed, 3 insertions(+)Documentation/devicetree/bindings/mmc/sdhci-msm.yaml +3
-1@@ -116,6 +116,9 @@ properties: description: Should specify pin control groups used for this controller. + resets: + maxItems: 1 + qcom,ddr-config: $ref: /schemas/types.yaml#/definitions/uint32 description: platform specific settings for DDR_CONFIG reg. --2.36.1