dt-bindings: mfd: stm32-timers: Move fixed string node names under 'properties'
Subsystems (4)
Rob Herring
maintainerPATCH 1/1 dt-bindings: mfd: stm32-timers: Move fixed string node names under 'properties'
Fixed string node names should be under 'properties' rather than 'patternProperties'. Additionally, without beginning and end of line anchors, any prefix or suffix is allowed on the specified node name.
Move the stm32 timers 'counter' and 'timer' nodes to the 'properties' section.
--- .../bindings/mfd/st,stm32-lptimer.yaml | 28 +++++++++---------- .../bindings/mfd/st,stm32-timers.yaml | 20 ++++++------- 2 files changed, 24 insertions(+), 24 deletions(-)
Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml +14 -14
@@ -58,43 +58,43 @@ properties: - "#pwm-cells" - compatible -patternProperties: - "^trigger@[0-9]+$": + counter: type: object properties: compatible: - const: st,stm32-lptimer-trigger - - reg: - description: Identify trigger hardware block. - items: - minimum: 0 - maximum: 2 + const: st,stm32-lptimer-counter required: - compatible - - reg - counter: + timer: type: object properties: compatible: - const: st,stm32-lptimer-counter + const: st,stm32-lptimer-timer required: - compatible - timer: +patternProperties: + "^trigger@[0-9]+$": type: object properties: compatible: - const: st,stm32-lptimer-timer + const: st,stm32-lptimer-trigger + + reg: + description: Identify trigger hardware block. + items: + minimum: 0 + maximum: 2 required: - compatible + - reg required: - "#address-cells"
Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml +10 -10
@@ -87,6 +87,16 @@ properties: - "#pwm-cells" - compatible + counter: + type: object + + properties: + compatible: + const: st,stm32-timer-counter + + required: + - compatible + patternProperties: "^timer@[0-9]+$": type: object
@@ -107,16 +117,6 @@ patternProperties: - compatible - reg - counter: - type: object - - properties: - compatible: - const: st,stm32-timer-counter - - required: - - compatible - required: - compatible - reg
Signature · 1 line
2.34.1
Quoted 8 lines · Rob Herring
Fixed string node names should be under 'properties' rather than 'patternProperties'. Additionally, without beginning and end of line anchors, any prefix or suffix is allowed on the specified node name.
Move the stm32 timers 'counter' and 'timer' nodes to the 'properties' section.
Signed-off-by Rob Herring <[email protected]>
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Quoted 8 lines · Rob Herring
Fixed string node names should be under 'properties' rather than 'patternProperties'. Additionally, without beginning and end of line anchors, any prefix or suffix is allowed on the specified node name.
Move the stm32 timers 'counter' and 'timer' nodes to the 'properties' section.
Signed-off-by Rob Herring <[email protected]>
Hi Rob,
You can add my:
Thanks and Best Regards,
Fabrice
Quoted 105 lines
--- .../bindings/mfd/st,stm32-lptimer.yaml | 28 +++++++++---------- .../bindings/mfd/st,stm32-timers.yaml | 20 ++++++------- 2 files changed, 24 insertions(+), 24 deletions(-)Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml +14
-14@@ -58,43 +58,43 @@ properties: - "#pwm-cells" - compatible -patternProperties: - "^trigger@[0-9]+$": + counter: type: object properties: compatible: - const: st,stm32-lptimer-trigger - - reg: - description: Identify trigger hardware block. - items: - minimum: 0 - maximum: 2 + const: st,stm32-lptimer-counter required: - compatible - - reg - counter: + timer: type: object properties: compatible: - const: st,stm32-lptimer-counter + const: st,stm32-lptimer-timer required: - compatible - timer: +patternProperties: + "^trigger@[0-9]+$": type: object properties: compatible: - const: st,stm32-lptimer-timer + const: st,stm32-lptimer-trigger + + reg: + description: Identify trigger hardware block. + items: + minimum: 0 + maximum: 2 required: - compatible + - reg required: - "#address-cells"Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml +10
-10@@ -87,6 +87,16 @@ properties: - "#pwm-cells" - compatible + counter: + type: object + + properties: + compatible: + const: st,stm32-timer-counter + + required: + - compatible + patternProperties: "^timer@[0-9]+$": type: object@@ -107,16 +117,6 @@ patternProperties: - compatible - reg - counter: - type: object - - properties: - compatible: - const: st,stm32-timer-counter - - required: - - compatible - required: - compatible - reg
Rob Herring
maintainerQuoted 4 lines · Rob Herring
Fixed string node names should be under 'properties' rather than 'patternProperties'. Additionally, without beginning and end of line anchors, any prefix or suffix is allowed on the specified node name.
Quoted 8 lines
Move the stm32 timers 'counter' and 'timer' nodes to the 'properties' section.
Signed-off-by Rob Herring <[email protected]>--- .../bindings/mfd/st,stm32-lptimer.yaml | 28 +++++++++---------- .../bindings/mfd/st,stm32-timers.yaml | 20 ++++++------- 2 files changed, 24 insertions(+), 24 deletions(-)
Lee, going to pick this one up?
Rob
Lee Jones
AppliedQuoted 4 lines · Rob Herring
Fixed string node names should be under 'properties' rather than 'patternProperties'. Additionally, without beginning and end of line anchors, any prefix or suffix is allowed on the specified node name.
Quoted 8 lines
Move the stm32 timers 'counter' and 'timer' nodes to the 'properties' section.
Signed-off-by Rob Herring <[email protected]>--- .../bindings/mfd/st,stm32-lptimer.yaml | 28 +++++++++---------- .../bindings/mfd/st,stm32-timers.yaml | 20 ++++++------- 2 files changed, 24 insertions(+), 24 deletions(-)
Applied, thanks.
Signature · 4 lines
Lee Jones [李琼斯] Principal Technical Lead - Developer Services Linaro.org │ Open source software for Arm SoCs Follow Linaro: Facebook | Twitter | Blog