Skip to contentSkip to conversation

Improve reliability of VM tests

PATCH Superseded John Snow 4 participants 31 messages Jul 7, 2022

v3 of 4 Superseded Latest is v4 →

lore
Share & tools
lore

John Snow

author
#0 lore raw

v3 cover Improve reliability of VM tests

Note: patches 11-13 are included for testing simplicity, they shouldn't be merged. They will be included in a forthcoming block PR.

This patch series attempts to improve the reliability of several of the VM test targets. In particular, both CentOS 8 tests are non-functional because CentOS 8 was EOL at the beginning of this calendar year, with repositories and mirrors going offline.

I also remove the ubuntu.i386 test because we no longer support Ubuntu 18.04 nor do we have explicit need of an i386 build test.

After this series, I am able to successfully run every VM target on an x86_64 host, except:

- ubuntu.aarch64: Hangs often during testing, see below.
- centos.aarch64: Hangs often during testing, see below.
- haiku.x86_64: Build failures not addressed by this series, see
https://lists.gnu.org/archive/html/qemu-devel/2022-06/msg02103.html

The unit tests that I see fail most often under aarch64 are:

- virtio-net-failover: Seems to like to hang on openbsd
- migration-test: Tends to hang under aarch64 tcg

Future work (next version? next series?);

- Try to get centos.aarch64 working reliably under TCG
- Upgrade ubuntu.aarch64 to 20.04 after fixing centos.aarch64
- Fix the Haiku build test, if possible.
- Ensure I can reliably run and pass "make vm-build-all". (Remove VMs from this recipe if necessary.)

John Snow (12):
qga: treat get-guest-fsinfo as "best effort" tests/vm: use 'cp' instead of 'ln' for temporary vm images tests/vm: switch CentOS 8 to CentOS 8 Stream tests/vm: switch centos.aarch64 to CentOS 8 Stream tests/vm: update sha256sum for ubuntu.aarch64 tests/vm: remove ubuntu.i386 VM test
tests/vm: remove duplicate 'centos' VM test tests/vm: add 1GB extra memory per core tests/vm: upgrade Ubuntu 18.04 VM to 20.04 tests/vm: Remove docker cross-compile test from CentOS VM tests/qemu-iotests: hotfix for 307, 223 output tests/qemu-iotests: skip 108 when FUSE is not loaded

Vladimir Sementsov-Ogievskiy (1):
iotests: fix copy-before-write for macOS and FreeBSD

 qga/commands-posix.c                       |   7 +-
 tests/qemu-iotests/108                     |   5 +
 tests/qemu-iotests/223.out                 |   4 +-
 tests/qemu-iotests/307.out                 |   4 +-
 tests/qemu-iotests/tests/copy-before-write |   5 +
 tests/vm/Makefile.include                  |   5 +-
 tests/vm/basevm.py                         |   5 +
 tests/vm/centos                            |   9 +-
 tests/vm/centos.aarch64                    | 174 +++------------------
 tests/vm/ubuntu.aarch64                    |  10 +-
 tests/vm/ubuntu.i386                       |  40 -----
 11 files changed, 62 insertions(+), 206 deletions(-)
 delete mode 100755 tests/vm/ubuntu.i386
Signature · 1 line
2.34.3
author
#1 lore raw

PATCH v3 1/13 qga: treat get-guest-fsinfo as "best effort"

In some container environments, there may be references to block devices witnessable from a container through /proc/self/mountinfo that reference devices we simply don't have access to in the container, and cannot provide information about.

Instead of failing the entire fsinfo command, return stub information for these failed lookups.

This allows test-qga to pass under docker tests, which are in turn used by the CentOS VM tests.

---
 qga/commands-posix.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
qga/commands-posix.c +6 -1
index 0469dc409d4..950c9d72fe7 100644
@@ -1207,7 +1207,12 @@ static void build_guest_fsinfo_for_device(char const *devpath,
 
     syspath = realpath(devpath, NULL);
     if (!syspath) {
-        error_setg_errno(errp, errno, "realpath(\"%s\")", devpath);
+        if (errno == ENOENT) {
+            /* This devpath may not exist because of container config, etc. */
+            fs->name = g_path_get_basename(devpath);
+        } else {
+            error_setg_errno(errp, errno, "realpath(\"%s\")", devpath);
+        }
         return;
     }
 
Signature · 1 line
2.34.3
Reviewed-by on v3 1/13
#2 lore raw

Re: [PATCH v3 01/13] qga: treat get-guest-fsinfo as "best effort"

Quoted 8 lines · John Snow

In some container environments, there may be references to block devices witnessable from a container through /proc/self/mountinfo that reference devices we simply don't have access to in the container, and cannot provide information about.

Instead of failing the entire fsinfo command, return stub information for these failed lookups.

Quoted 7 lines

This allows test-qga to pass under docker tests, which are in turn used by the CentOS VM tests.

---
 qga/commands-posix.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

With regards,
Daniel

Signature · 3 lines
|: https://berrange.com      -o-    https://www.flickr.com/photos/dberrange :|
|: https://libvirt.org         -o-            https://fstop138.berrange.com :|
|: https://entangle-photo.org    -o-    https://www.instagram.com/dberrange :|
#3 lore raw

Re: [PATCH v3 01/13] qga: treat get-guest-fsinfo as "best effort"

In reply to John Snow

Hi

Quoted 30 lines · John Snow

In some container environments, there may be references to block devices witnessable from a container through /proc/self/mountinfo that reference devices we simply don't have access to in the container, and cannot provide information about.

Instead of failing the entire fsinfo command, return stub information for these failed lookups.

This allows test-qga to pass under docker tests, which are in turn used by the CentOS VM tests.

---
 qga/commands-posix.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
qga/commands-posix.c +2 -1
index 0469dc409d4..950c9d72fe7 100644
@@ -1207,7 +1207,12 @@ static void build_guest_fsinfo_for_device(char
 const *devpath,
 
     syspath = realpath(devpath, NULL);
     if (!syspath) {
-        error_setg_errno(errp, errno, "realpath(\"%s\")", devpath);
+        if (errno == ENOENT) {
+            /* This devpath may not exist because of container config,

etc. */

qga/commands-posix.c static void build_guest_fsinfo_for_device(char const *devpath, · line 1215

Quoted 4 lines
qga/commands-posix.c +4 -0
+            fs->name = g_path_get_basename(devpath);
+        } else {
+            error_setg_errno(errp, errno, "realpath(\"%s\")", devpath);
+        }

It looks like this function is called recursively with the same "fs" argument. That's probably why there is a if (!fs->name) check next. You may want to check it too to avoid leaks and incorrect info.

Quoted 8 lines
         return;
     }

--
2.34.3

Signature · 1 line
Marc-André Lureau
author
#4 lore raw

Re: [PATCH v3 01/13] qga: treat get-guest-fsinfo as "best effort"

Quoted 27 lines · Marc-André Lureau

Hi

Quoted 23 lines · John Snow

In some container environments, there may be references to block devices witnessable from a container through /proc/self/mountinfo that reference devices we simply don't have access to in the container, and cannot provide information about.

Instead of failing the entire fsinfo command, return stub information for these failed lookups.

This allows test-qga to pass under docker tests, which are in turn used by the CentOS VM tests.

---
 qga/commands-posix.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
qga/commands-posix.c +0 -0
index 0469dc409d4..950c9d72fe7 100644
@@ -1207,7 +1207,12 @@ static void build_guest_fsinfo_for_device(char const *devpath,
 
Quoted 12 lines

qga/commands-posix.c static void build_guest_fsinfo_for_device(char const *devpath, · line 1215

Quoted 9 lines
qga/commands-posix.c +6 -1
     syspath = realpath(devpath, NULL);
     if (!syspath) {
-        error_setg_errno(errp, errno, "realpath(\"%s\")", devpath);
+        if (errno == ENOENT) {
+            /* This devpath may not exist because of container config, etc. */
+            fs->name = g_path_get_basename(devpath);
+        } else {
+            error_setg_errno(errp, errno, "realpath(\"%s\")", devpath);
+        }

It looks like this function is called recursively with the same "fs" argument. That's probably why there is a if (!fs->name) check next. You may want to check it too to avoid leaks and incorrect info.

Oh, I see what you mean. I am not sure if it will come up in practice*, but I see the theoretical concern at least. I can amend it.

--js

* (Genuinely; I have no idea.)

author
#5 lore raw

PATCH v3 2/13 tests/vm: use 'cp' instead of 'ln' for temporary vm images

In reply to John Snow

If the initial setup fails, you've permanently altered the state of the downloaded image in an unknowable way. Use 'cp' like our other test setup scripts do.

---
 tests/vm/centos | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tests/vm/centos +1 -1
index 5c7bc1c1a9a..be4f6ff2f14 100755
@@ -34,7 +34,7 @@ class CentosVM(basevm.BaseVM):
     def build_image(self, img):
         cimg = self._download_with_cache("https://cloud.centos.org/centos/8/x86_64/images/CentOS-8-GenericCloud-8.3.2011-20201204.2.x86_64.qcow2")
         img_tmp = img + ".tmp"
-        subprocess.check_call(["ln", "-f", cimg, img_tmp])
+        subprocess.check_call(['cp', '-f', cimg, img_tmp])
         self.exec_qemu_img("resize", img_tmp, "50G")
         self.boot(img_tmp, extra_args = ["-cdrom", self.gen_cloud_init_iso()])
         self.wait_ssh()
Signature · 1 line
2.34.3
Reviewed-by on v3 2/13
#6 lore raw

Re: [PATCH v3 02/13] tests/vm: use 'cp' instead of 'ln' for temporary vm images

Quoted 9 lines · John Snow

If the initial setup fails, you've permanently altered the state of the downloaded image in an unknowable way. Use 'cp' like our other test setup scripts do.

---
 tests/vm/centos | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

With regards,
Daniel

Signature · 3 lines
|: https://berrange.com      -o-    https://www.flickr.com/photos/dberrange :|
|: https://libvirt.org         -o-            https://fstop138.berrange.com :|
|: https://entangle-photo.org    -o-    https://www.instagram.com/dberrange :|
author
#7 lore raw

PATCH v3 3/13 tests/vm: switch CentOS 8 to CentOS 8 Stream

In reply to John Snow

The old CentOS image didn't work anymore because it was already EOL at the beginning of 2022.

---
 tests/vm/centos | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
tests/vm/centos +3 -3
index be4f6ff2f14..3a527c47b3d 100755
@@ -1,8 +1,8 @@
 #!/usr/bin/env python3
 #
-# CentOS image
+# CentOS 8 Stream image
 #
-# Copyright 2018 Red Hat Inc.
+# Copyright 2018, 2022 Red Hat Inc.
 #
 # Authors:
 #  Fam Zheng <[email protected]>
@@ -32,7 +32,7 @@ class CentosVM(basevm.BaseVM):
     """
 
     def build_image(self, img):
-        cimg = self._download_with_cache("https://cloud.centos.org/centos/8/x86_64/images/CentOS-8-GenericCloud-8.3.2011-20201204.2.x86_64.qcow2")
+        cimg = self._download_with_cache("https://cloud.centos.org/centos/8-stream/x86_64/images/CentOS-Stream-GenericCloud-8-20220125.1.x86_64.qcow2")
         img_tmp = img + ".tmp"
         subprocess.check_call(['cp', '-f', cimg, img_tmp])
         self.exec_qemu_img("resize", img_tmp, "50G")
Signature · 1 line
2.34.3
Reviewed-by on v3 3/13
#8 lore raw

Re: [PATCH v3 03/13] tests/vm: switch CentOS 8 to CentOS 8 Stream

Quoted 8 lines · John Snow

The old CentOS image didn't work anymore because it was already EOL at the beginning of 2022.

---
 tests/vm/centos | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

With regards,
Daniel

Signature · 3 lines
|: https://berrange.com      -o-    https://www.flickr.com/photos/dberrange :|
|: https://libvirt.org         -o-            https://fstop138.berrange.com :|
|: https://entangle-photo.org    -o-    https://www.instagram.com/dberrange :|
author
#9 lore raw

PATCH v3 4/13 tests/vm: switch centos.aarch64 to CentOS 8 Stream

In reply to John Snow

Switch this test over to using a cloud image like the base CentOS8 VM test, which helps make this script a bit simpler too.

Note: At time of writing, this test seems pretty flaky when run without KVM support for aarch64. Certain unit tests like migration-test, virtio-net-failover, test-hmp and qom-test seem quite prone to fail under TCG. Still, this is an improvement in that at least pure build tests are functional.

---
 tests/vm/centos.aarch64 | 174 ++++++----------------------------------
 1 file changed, 24 insertions(+), 150 deletions(-)
tests/vm/centos.aarch64 +24 -150
index 96c450f8be5..2de7ef6992c 100755
@@ -20,150 +20,38 @@ import time
 import traceback
 import aarch64vm
 
+
 DEFAULT_CONFIG = {
     'cpu'          : "max",
     'machine'      : "virt,gic-version=max",
-    'install_cmds' : "yum install -y make ninja-build git python3 gcc gcc-c++ flex bison, "\
-        "yum install -y glib2-devel perl pixman-devel zlib-devel, "\
-        "alternatives --set python /usr/bin/python3, "\
-        "sudo dnf config-manager "\
-        "--add-repo=https://download.docker.com/linux/centos/docker-ce.repo,"\
-        "sudo dnf install --nobest -y docker-ce.aarch64,"\
-        "systemctl enable docker",
+    'install_cmds' : (
+        "dnf config-manager --set-enabled powertools, "
+        "dnf config-manager --add-repo=https://download.docker.com/linux/centos/docker-ce.repo, "
+        "dnf install -y make ninja-build git python38 gcc gcc-c++ flex bison "\
+            "glib2-devel perl pixman-devel zlib-devel docker-ce.aarch64, "
+        "systemctl enable docker, "
+    ),
     # We increase beyond the default time since during boot
     # it can take some time (many seconds) to log into the VM.
     'ssh_timeout'  : 60,
 }
 
+
 class CentosAarch64VM(basevm.BaseVM):
-    name = "centos.aarch64"
+    name = "centos8.aarch64"
     arch = "aarch64"
-    login_prompt = "localhost login:"
-    prompt = '[root@localhost ~]#'
-    image_name = "CentOS-8-aarch64-1905-dvd1.iso"
-    image_link = "http://mirrors.usc.edu/pub/linux/distributions/centos/8.0.1905/isos/aarch64/"
+    image_name = "CentOS-Stream-GenericCloud-8-20220125.1.aarch64.qcow2"
+    image_link = "https://cloud.centos.org/centos/8-stream/aarch64/images/"
     image_link += image_name
     BUILD_SCRIPT = """
         set -e;
         cd $(mktemp -d);
-        sudo chmod a+r /dev/vdb;
-        tar --checkpoint=.10 -xf /dev/vdb;
+        export SRC_ARCHIVE=/dev/vdb;
+        sudo chmod a+r $SRC_ARCHIVE;
+        tar -xf $SRC_ARCHIVE;
         ./configure {configure_opts};
         make --output-sync {target} -j{jobs} {verbose};
     """
-    def set_key_perm(self):
-        """Set permissions properly on certain files to allow
-           ssh access."""
-        self.console_wait_send(self.prompt,
-                               "/usr/sbin/restorecon -R -v /root/.ssh\n")
-        self.console_wait_send(self.prompt,
-                "/usr/sbin/restorecon -R -v "\
-                "/home/{}/.ssh\n".format(self._config["guest_user"]))
-
-    def create_kickstart(self):
-        """Generate the kickstart file used to generate the centos image."""
-        # Start with the template for the kickstart.
-        ks_file = self._source_path + "/tests/vm/centos-8-aarch64.ks"
-        subprocess.check_call("cp {} ./ks.cfg".format(ks_file), shell=True)
-        # Append the ssh keys to the kickstart file
-        # as the post processing phase of installation.
-        with open("ks.cfg", "a") as f:
-            # Add in the root pw and guest user.
-            rootpw = "rootpw --plaintext {}\n"
-            f.write(rootpw.format(self._config["root_pass"]))
-            add_user = "user --groups=wheel --name={} "\
-                       "--password={} --plaintext\n"
-            f.write(add_user.format(self._config["guest_user"],
-                                    self._config["guest_pass"]))
-            # Add the ssh keys.
-            f.write("%post --log=/root/ks-post.log\n")
-            f.write("mkdir -p /root/.ssh\n")
-            addkey = 'echo "{}" >> /root/.ssh/authorized_keys\n'
-            addkey_cmd = addkey.format(self._config["ssh_pub_key"])
-            f.write(addkey_cmd)
-            f.write('mkdir -p /home/{}/.ssh\n'.format(self._config["guest_user"]))
-            addkey = 'echo "{}" >> /home/{}/.ssh/authorized_keys\n'
-            addkey_cmd = addkey.format(self._config["ssh_pub_key"],
-                                       self._config["guest_user"])
-            f.write(addkey_cmd)
-            f.write("%end\n")
-        # Take our kickstart file and create an .iso from it.
-        # The .iso will be provided to qemu as we boot
-        # from the install dvd.
-        # Anaconda will recognize the label "OEMDRV" and will
-        # start the automated installation.
-        gen_iso_img = 'genisoimage -output ks.iso -volid "OEMDRV" ks.cfg'
-        subprocess.check_call(gen_iso_img, shell=True)
-
-    def wait_for_shutdown(self):
-        """We wait for qemu to shutdown the VM and exit.
-           While this happens we display the console view
-           for easier debugging."""
-        # The image creation is essentially done,
-        # so whether or not the wait is successful we want to
-        # wait for qemu to exit (the self.wait()) before we return.
-        try:
-            self.console_wait("reboot: Power down")
-        except Exception as e:
-            sys.stderr.write("Exception hit\n")
-            if isinstance(e, SystemExit) and e.code == 0:
-                return 0
-            traceback.print_exc()
-        finally:
-            self.wait()
-
-    def build_base_image(self, dest_img):
-        """Run through the centos installer to create
-           a base image with name dest_img."""
-        # We create the temp image, and only rename
-        # to destination when we are done.
-        img = dest_img + ".tmp"
-        # Create an empty image.
-        # We will provide this as the install destination.
-        qemu_img_create = "qemu-img create {} 50G".format(img)
-        subprocess.check_call(qemu_img_create, shell=True)
-
-        # Create our kickstart file to be fed to the installer.
-        self.create_kickstart()
-        # Boot the install dvd with the params as our ks.iso
-        os_img = self._download_with_cache(self.image_link)
-        dvd_iso = "centos-8-dvd.iso"
-        subprocess.check_call(["cp", "-f", os_img, dvd_iso])
-        extra_args = "-cdrom ks.iso"
-        extra_args += " -drive file={},if=none,id=drive1,cache=writeback"
-        extra_args += " -device virtio-blk,drive=drive1,bootindex=1"
-        extra_args = extra_args.format(dvd_iso).split(" ")
-        self.boot(img, extra_args=extra_args)
-        self.console_wait_send("change the selection", "\n")
-        # We seem to need to hit esc (chr(27)) twice to abort the
-        # media check, which takes a long time.
-        # Waiting a bit seems to be more reliable before hitting esc.
-        self.console_wait("Checking")
-        time.sleep(5)
-        self.console_wait_send("Checking", chr(27))
-        time.sleep(5)
-        self.console_wait_send("Checking", chr(27))
-        print("Found Checking")
-        # Give sufficient time for the installer to create the image.
-        self.console_init(timeout=7200)
-        self.wait_for_shutdown()
-        os.rename(img, dest_img)
-        print("Done with base image build: {}".format(dest_img))
-
-    def check_create_base_img(self, img_base, img_dest):
-        """Create a base image using the installer.
-           We will use the base image if it exists.
-           This helps cut down on install time in case we
-           need to restart image creation,
-           since the base image creation can take a long time."""
-        if not os.path.exists(img_base):
-            print("Generate new base image: {}".format(img_base))
-            self.build_base_image(img_base);
-        else:
-            print("Use existing base image: {}".format(img_base))
-        # Save a copy of the base image and copy it to dest.
-        # which we will use going forward.
-        subprocess.check_call(["cp", img_base, img_dest])
 
     def boot(self, img, extra_args=None):
         aarch64vm.create_flash_images(self._tmpdir, self._efi_aarch64)
@@ -185,42 +73,28 @@ class CentosAarch64VM(basevm.BaseVM):
         super(CentosAarch64VM, self).boot(img, extra_args=extra_args)
 
     def build_image(self, img):
+        cimg = self._download_with_cache(self.image_link)
         img_tmp = img + ".tmp"
-        self.check_create_base_img(img + ".base", img_tmp)
-
-        # Boot the new image for the first time to finish installation.
-        self.boot(img_tmp)
-        self.console_init()
-        self.console_wait_send(self.login_prompt, "root\n")
-        self.console_wait_send("Password:",
-                               "{}\n".format(self._config["root_pass"]))
-
-        self.set_key_perm()
-        self.console_wait_send(self.prompt, "rpm -q centos-release\n")
-        enable_adapter = "sed -i 's/ONBOOT=no/ONBOOT=yes/g'" \
-                         " /etc/sysconfig/network-scripts/ifcfg-enp0s1\n"
-        self.console_wait_send(self.prompt, enable_adapter)
-        self.console_wait_send(self.prompt, "ifup enp0s1\n")
-        self.console_wait_send(self.prompt,
-                               'echo "qemu  ALL=(ALL) NOPASSWD:ALL" | '\
-                               'sudo tee /etc/sudoers.d/qemu\n')
-        self.console_wait(self.prompt)
-
-        # Rest of the commands we issue through ssh.
+        subprocess.run(['cp', '-f', cimg, img_tmp])
+        self.exec_qemu_img("resize", img_tmp, "50G")
+        self.boot(img_tmp, extra_args = ["-cdrom", self.gen_cloud_init_iso()])
         self.wait_ssh(wait_root=True)
+        self.ssh_root_check("touch /etc/cloud/cloud-init.disabled")
 
         # If the user chooses *not* to do the second phase,
         # then we will jump right to the graceful shutdown
         if self._config['install_cmds'] != "":
             install_cmds = self._config['install_cmds'].split(',')
             for cmd in install_cmds:
-                self.ssh_root(cmd)
+                self.ssh_root_check(cmd)
+
         self.ssh_root("poweroff")
-        self.wait_for_shutdown()
+        self.wait()
         os.rename(img_tmp, img)
         print("image creation complete: {}".format(img))
         return 0
 
+
 if __name__ == "__main__":
     defaults = aarch64vm.get_config_defaults(CentosAarch64VM, DEFAULT_CONFIG)
     sys.exit(basevm.main(CentosAarch64VM, defaults))
Signature · 1 line
2.34.3
Reviewed-by on v3 4/13
#10 lore raw

Re: [PATCH v3 04/13] tests/vm: switch centos.aarch64 to CentOS 8 Stream

Quoted 9 lines · John Snow

Switch this test over to using a cloud image like the base CentOS8 VM test, which helps make this script a bit simpler too.

Note: At time of writing, this test seems pretty flaky when run without KVM support for aarch64. Certain unit tests like migration-test, virtio-net-failover, test-hmp and qom-test seem quite prone to fail under TCG. Still, this is an improvement in that at least pure build tests are functional.

Quoted 4 lines
---
 tests/vm/centos.aarch64 | 174 ++++++----------------------------------
 1 file changed, 24 insertions(+), 150 deletions(-)

With regards,
Daniel

Signature · 3 lines
|: https://berrange.com      -o-    https://www.flickr.com/photos/dberrange :|
|: https://libvirt.org         -o-            https://fstop138.berrange.com :|
|: https://entangle-photo.org    -o-    https://www.instagram.com/dberrange :|
author
#11 lore raw

PATCH v3 5/13 tests/vm: update sha256sum for ubuntu.aarch64

In reply to John Snow

This checksum changes weekly; use a fixed point image and update the checksum so we don't have to re-download it quite so much.

Note: Just like the centos.aarch64 test, this test currently seems very flaky when run as a TCG test.

---
 tests/vm/ubuntu.aarch64 | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
tests/vm/ubuntu.aarch64 +6 -2
index b291945a7e9..fc9c2ce22ff 100755
@@ -32,9 +32,13 @@ DEFAULT_CONFIG = {
 class UbuntuAarch64VM(ubuntuvm.UbuntuVM):
     name = "ubuntu.aarch64"
     arch = "aarch64"
+    # NOTE: The Ubuntu 18.04 cloud images are updated weekly. The
+    # release below has been chosen as the latest at time of writing.
+    # Using the rolling latest release means the SHA will be wrong
+    # within a week.
     image_name = "ubuntu-18.04-server-cloudimg-arm64.img"
-    image_link = "https://cloud-images.ubuntu.com/releases/18.04/release/" + image_name
-    image_sha256="0fdcba761965735a8a903d8b88df8e47f156f48715c00508e4315c506d7d3cb1"
+    image_link = "https://cloud-images.ubuntu.com/releases/bionic/release-20220610/" + image_name
+    image_sha256="0eacc5142238788365576b15f1d0b6f23dda6d3e545ee22f5306af7bd6ec47bd"
     BUILD_SCRIPT = """
         set -e;
         cd $(mktemp -d);
Signature · 1 line
2.34.3
Reviewed-by on v3 5/13
#12 lore raw

Re: [PATCH v3 05/13] tests/vm: update sha256sum for ubuntu.aarch64

Quoted 10 lines · John Snow

This checksum changes weekly; use a fixed point image and update the checksum so we don't have to re-download it quite so much.

Note: Just like the centos.aarch64 test, this test currently seems very flaky when run as a TCG test.

---
 tests/vm/ubuntu.aarch64 | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

With regards,
Daniel

Signature · 3 lines
|: https://berrange.com      -o-    https://www.flickr.com/photos/dberrange :|
|: https://libvirt.org         -o-            https://fstop138.berrange.com :|
|: https://entangle-photo.org    -o-    https://www.instagram.com/dberrange :|
#13 lore raw

Re: [PATCH v3 05/13] tests/vm: update sha256sum for ubuntu.aarch64

In reply to John Snow
Quoted 16 lines · John Snow

This checksum changes weekly; use a fixed point image and update the checksum so we don't have to re-download it quite so much.

Note: Just like the centos.aarch64 test, this test currently seems very flaky when run as a TCG test.

---
  tests/vm/ubuntu.aarch64 | 8 ++++++--
  1 file changed, 6 insertions(+), 2 deletions(-)
tests/vm/ubuntu.aarch64 +0 -0
index b291945a7e9..fc9c2ce22ff 100755

tests/vm/ubuntu.aarch64 DEFAULT_CONFIG = { · line 38

Quoted 7 lines
tests/vm/ubuntu.aarch64 +4 -0
@@ -32,9 +32,13 @@ DEFAULT_CONFIG = {
  class UbuntuAarch64VM(ubuntuvm.UbuntuVM):
      name = "ubuntu.aarch64"
      arch = "aarch64"
+    # NOTE: The Ubuntu 18.04 cloud images are updated weekly. The
+    # release below has been chosen as the latest at time of writing.
+    # Using the rolling latest release means the SHA will be wrong
+    # within a week.

Isn't 18.04 unsupported now? Surely bumping to 20.04 or 22.04 would be better.

r~

Quoted 8 lines
tests/vm/ubuntu.aarch64 +2 -2
      image_name = "ubuntu-18.04-server-cloudimg-arm64.img"
-    image_link = "https://cloud-images.ubuntu.com/releases/18.04/release/" + image_name
-    image_sha256="0fdcba761965735a8a903d8b88df8e47f156f48715c00508e4315c506d7d3cb1"
+    image_link = "https://cloud-images.ubuntu.com/releases/bionic/release-20220610/" + image_name
+    image_sha256="0eacc5142238788365576b15f1d0b6f23dda6d3e545ee22f5306af7bd6ec47bd"
      BUILD_SCRIPT = """
          set -e;
          cd $(mktemp -d);
author
#14 lore raw

PATCH v3 6/13 tests/vm: remove ubuntu.i386 VM test

In reply to John Snow

Ubuntu 18.04 is out of our support window, and Ubuntu 20.04 does not support i386 anymore. The debian project does, but they do not provide any cloud images for it, a new expect-style script would have to be written.

Since we have i386 cross-compiler tests hosted on GitLab CI, we don't need to support this VM test anymore.

---
 tests/vm/Makefile.include |  3 +--
 tests/vm/ubuntu.i386      | 40 ---------------------------------------
 2 files changed, 1 insertion(+), 42 deletions(-)
 delete mode 100755 tests/vm/ubuntu.i386
tests/vm/Makefile.include +1 -2
index 5f5b1fbfe68..a94f0ebf7f1 100644
@@ -17,7 +17,7 @@ EFI_AARCH64 = $(wildcard $(BUILD_DIR)/pc-bios/edk2-aarch64-code.fd)
 
 X86_IMAGES := freebsd netbsd openbsd centos fedora haiku.x86_64
 ifneq ($(GENISOIMAGE),)
-X86_IMAGES += ubuntu.i386 centos
+X86_IMAGES += centos
 ifneq ($(EFI_AARCH64),)
 ARM64_IMAGES += ubuntu.aarch64 centos.aarch64
 endif
@@ -48,7 +48,6 @@ vm-help vm-test:
 	@echo "  vm-build-fedora                 - Build QEMU in Fedora VM"
 ifneq ($(GENISOIMAGE),)
 	@echo "  vm-build-centos                 - Build QEMU in CentOS VM, with Docker"
-	@echo "  vm-build-ubuntu.i386            - Build QEMU in ubuntu i386 VM"
 ifneq ($(EFI_AARCH64),)
 	@echo "  vm-build-ubuntu.aarch64         - Build QEMU in ubuntu aarch64 VM"
 	@echo "  vm-build-centos.aarch64         - Build QEMU in CentOS aarch64 VM"
tests/vm/ubuntu.i386 deleted +0 -40
deleted file mode 100755
index 47681b6f87d..00000000000
@@ -1,40 +0,0 @@
-#!/usr/bin/env python3
-#
-# Ubuntu i386 image
-#
-# Copyright 2017 Red Hat Inc.
-#
-# Authors:
-#  Fam Zheng <[email protected]>
-#
-# This code is licensed under the GPL version 2 or later.  See
-# the COPYING file in the top-level directory.
-#
-
-import sys
-import basevm
-import ubuntuvm
-
-DEFAULT_CONFIG = {
-    'install_cmds' : "apt-get update,"\
-                     "apt-get build-dep -y qemu,"\
-                     "apt-get install -y libfdt-dev language-pack-en ninja-build",
-}
-
-class UbuntuX86VM(ubuntuvm.UbuntuVM):
-    name = "ubuntu.i386"
-    arch = "i386"
-    image_link="https://cloud-images.ubuntu.com/releases/bionic/"\
-               "release-20191114/ubuntu-18.04-server-cloudimg-i386.img"
-    image_sha256="28969840626d1ea80bb249c08eef1a4533e8904aa51a327b40f37ac4b4ff04ef"
-    BUILD_SCRIPT = """
-        set -e;
-        cd $(mktemp -d);
-        sudo chmod a+r /dev/vdb;
-        tar -xf /dev/vdb;
-        ./configure {configure_opts};
-        make --output-sync {target} -j{jobs} {verbose};
-    """
-
-if __name__ == "__main__":
-    sys.exit(basevm.main(UbuntuX86VM, DEFAULT_CONFIG))
Signature · 1 line
2.34.3
Reviewed-by on v3 6/13
#15 lore raw

Re: [PATCH v3 06/13] tests/vm: remove ubuntu.i386 VM test

Quoted 8 lines · John Snow

Ubuntu 18.04 is out of our support window, and Ubuntu 20.04 does not support i386 anymore. The debian project does, but they do not provide any cloud images for it, a new expect-style script would have to be written.

Since we have i386 cross-compiler tests hosted on GitLab CI, we don't need to support this VM test anymore.

Quoted 7 lines
---
 tests/vm/Makefile.include |  3 +--
 tests/vm/ubuntu.i386      | 40 ---------------------------------------
 2 files changed, 1 insertion(+), 42 deletions(-)
 delete mode 100755 tests/vm/ubuntu.i386

With regards,
Daniel

Signature · 3 lines
|: https://berrange.com      -o-    https://www.flickr.com/photos/dberrange :|
|: https://libvirt.org         -o-            https://fstop138.berrange.com :|
|: https://entangle-photo.org    -o-    https://www.instagram.com/dberrange :|
author
#16 lore raw

PATCH v3 7/13 tests/vm: remove duplicate 'centos' VM test

In reply to John Snow

This is listed twice by accident; we require genisoimage to run the test, so remove the unconditional entry.

---
 tests/vm/Makefile.include | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tests/vm/Makefile.include +1 -1
index a94f0ebf7f1..8d2a164552d 100644
@@ -15,7 +15,7 @@ endif
 
 EFI_AARCH64 = $(wildcard $(BUILD_DIR)/pc-bios/edk2-aarch64-code.fd)
 
-X86_IMAGES := freebsd netbsd openbsd centos fedora haiku.x86_64
+X86_IMAGES := freebsd netbsd openbsd fedora haiku.x86_64
 ifneq ($(GENISOIMAGE),)
 X86_IMAGES += centos
 ifneq ($(EFI_AARCH64),)
Signature · 1 line
2.34.3
Reviewed-by on v3 7/13
#17 lore raw

Re: [PATCH v3 07/13] tests/vm: remove duplicate 'centos' VM test

Quoted 8 lines · John Snow

This is listed twice by accident; we require genisoimage to run the test, so remove the unconditional entry.

---
 tests/vm/Makefile.include | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

With regards,
Daniel

Signature · 3 lines
|: https://berrange.com      -o-    https://www.flickr.com/photos/dberrange :|
|: https://libvirt.org         -o-            https://fstop138.berrange.com :|
|: https://entangle-photo.org    -o-    https://www.instagram.com/dberrange :|
author
#18 lore raw

PATCH v3 8/13 tests/vm: add 1GB extra memory per core

In reply to John Snow

If you try to run a 16 or 32 threaded test, you're going to run out of memory very quickly with qom-test and a few others. Bump the memory limit to try to scale with larger-core machines.

Granted, this means that a 16 core processor is going to ask for 16GB, but you *probably* meet that requirement if you have such a machine.

512MB per core didn't seem to be enough to avoid ENOMEM and SIGABRTs in the test cases in practice on a six core machine; so I bumped it up to 1GB which seemed to help.

Add this magic in early to the configuration process so that the config file, if provided, can still override it.

---
 tests/vm/basevm.py | 5 +++++
 1 file changed, 5 insertions(+)
tests/vm/basevm.py +5 -0
index d7d0413df35..4fd9af10b7f 100644
@@ -99,6 +99,11 @@ def __init__(self, args, config=None):
         self._source_path = args.source_path
         # Allow input config to override defaults.
         self._config = DEFAULT_CONFIG.copy()
+
+        # 1GB per core, minimum of 4. This is only a default.
+        mem = max(4, args.jobs)
+        self._config['memory'] = f"{mem}G"
+
         if config != None:
             self._config.update(config)
         self.validate_ssh_keys()
Signature · 1 line
2.34.3
Reviewed-by on v3 8/13
#19 lore raw

Re: [PATCH v3 08/13] tests/vm: add 1GB extra memory per core

Quoted 10 lines · John Snow

If you try to run a 16 or 32 threaded test, you're going to run out of memory very quickly with qom-test and a few others. Bump the memory limit to try to scale with larger-core machines.

Granted, this means that a 16 core processor is going to ask for 16GB, but you *probably* meet that requirement if you have such a machine.

512MB per core didn't seem to be enough to avoid ENOMEM and SIGABRTs in the test cases in practice on a six core machine; so I bumped it up to 1GB which seemed to help.

RHEL recommends 1.5 GB per virtual CPU, so yeah, allowing only 512 MB was unreasonably small by typical standards.

Quoted 8 lines

Add this magic in early to the configuration process so that the config file, if provided, can still override it.

---
 tests/vm/basevm.py | 5 +++++
 1 file changed, 5 insertions(+)

With regards,
Daniel

Signature · 3 lines
|: https://berrange.com      -o-    https://www.flickr.com/photos/dberrange :|
|: https://libvirt.org         -o-            https://fstop138.berrange.com :|
|: https://entangle-photo.org    -o-    https://www.instagram.com/dberrange :|
author
#20 lore raw

PATCH v3 9/13 tests/vm: upgrade Ubuntu 18.04 VM to 20.04

In reply to John Snow

18.04 has fallen out of our support window, so move ubuntu.aarch64 forward to ubuntu 20.04, which is now our oldest supported Ubuntu release.

---
 tests/vm/ubuntu.aarch64 | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
tests/vm/ubuntu.aarch64 +7 -7
index fc9c2ce22ff..666947393bd 100755
@@ -32,13 +32,13 @@ DEFAULT_CONFIG = {
 class UbuntuAarch64VM(ubuntuvm.UbuntuVM):
     name = "ubuntu.aarch64"
     arch = "aarch64"
-    # NOTE: The Ubuntu 18.04 cloud images are updated weekly. The
-    # release below has been chosen as the latest at time of writing.
-    # Using the rolling latest release means the SHA will be wrong
-    # within a week.
-    image_name = "ubuntu-18.04-server-cloudimg-arm64.img"
-    image_link = "https://cloud-images.ubuntu.com/releases/bionic/release-20220610/" + image_name
-    image_sha256="0eacc5142238788365576b15f1d0b6f23dda6d3e545ee22f5306af7bd6ec47bd"
+    # NOTE: The Ubuntu 20.04 cloud images are periodically updated. The
+    # fixed image chosen below is the latest release at time of
+    # writing. Using a rolling latest instead would mean that the SHA
+    # would be incorrect at an indeterminate point in the future.
+    image_name = "focal-server-cloudimg-arm64.img"
+    image_link = "https://cloud-images.ubuntu.com/focal/20220615/" + image_name
+    image_sha256="95a027336e197debe88c92ff2e554598e23c409139e1e750b71b3b820b514832"
     BUILD_SCRIPT = """
         set -e;
         cd $(mktemp -d);
Signature · 1 line
2.34.3
Reviewed-by on v3 9/13
#21 lore raw

Re: [PATCH v3 09/13] tests/vm: upgrade Ubuntu 18.04 VM to 20.04

Quoted 8 lines · John Snow

18.04 has fallen out of our support window, so move ubuntu.aarch64 forward to ubuntu 20.04, which is now our oldest supported Ubuntu release.

---
 tests/vm/ubuntu.aarch64 | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

With regards,
Daniel

Signature · 3 lines
|: https://berrange.com      -o-    https://www.flickr.com/photos/dberrange :|
|: https://libvirt.org         -o-            https://fstop138.berrange.com :|
|: https://entangle-photo.org    -o-    https://www.instagram.com/dberrange :|
#22 lore raw

Re: [PATCH v3 09/13] tests/vm: upgrade Ubuntu 18.04 VM to 20.04

In reply to John Snow
Quoted 3 lines · John Snow

18.04 has fallen out of our support window, so move ubuntu.aarch64 forward to ubuntu 20.04, which is now our oldest supported Ubuntu release.

Ah. Squash with patch 5?

r~

Quoted 31 lines
---
  tests/vm/ubuntu.aarch64 | 14 +++++++-------
  1 file changed, 7 insertions(+), 7 deletions(-)
tests/vm/ubuntu.aarch64 +7 -7
index fc9c2ce22ff..666947393bd 100755
@@ -32,13 +32,13 @@ DEFAULT_CONFIG = {
  class UbuntuAarch64VM(ubuntuvm.UbuntuVM):
      name = "ubuntu.aarch64"
      arch = "aarch64"
-    # NOTE: The Ubuntu 18.04 cloud images are updated weekly. The
-    # release below has been chosen as the latest at time of writing.
-    # Using the rolling latest release means the SHA will be wrong
-    # within a week.
-    image_name = "ubuntu-18.04-server-cloudimg-arm64.img"
-    image_link = "https://cloud-images.ubuntu.com/releases/bionic/release-20220610/" + image_name
-    image_sha256="0eacc5142238788365576b15f1d0b6f23dda6d3e545ee22f5306af7bd6ec47bd"
+    # NOTE: The Ubuntu 20.04 cloud images are periodically updated. The
+    # fixed image chosen below is the latest release at time of
+    # writing. Using a rolling latest instead would mean that the SHA
+    # would be incorrect at an indeterminate point in the future.
+    image_name = "focal-server-cloudimg-arm64.img"
+    image_link = "https://cloud-images.ubuntu.com/focal/20220615/" + image_name
+    image_sha256="95a027336e197debe88c92ff2e554598e23c409139e1e750b71b3b820b514832"
      BUILD_SCRIPT = """
          set -e;
          cd $(mktemp -d);
author
#23 lore raw

Re: [PATCH v3 09/13] tests/vm: upgrade Ubuntu 18.04 VM to 20.04

Quoted 7 lines · Richard Henderson
Quoted 3 lines · John Snow

18.04 has fallen out of our support window, so move ubuntu.aarch64 forward to ubuntu 20.04, which is now our oldest supported Ubuntu release.

Ah. Squash with patch 5?

Can do. I left it split for testing purposes, but if we want both patches I can merge them. (Testing all of this was a nightmare.)

--js

author
#24 lore raw

PATCH v3 10/13 tests/vm: Remove docker cross-compile test from CentOS VM

In reply to John Snow

The fedora container has since been split apart, so there's no suitable nearby target that would support "test-mingw" as it requires both x32 and x64 support -- so either fedora-cross-win32 nor fedora-cross-win64 would be truly suitable.

Just remove this test as superfluous with our current CI infrastructure.

---
 tests/vm/centos | 1 -
 1 file changed, 1 deletion(-)
tests/vm/centos +0 -1
index 3a527c47b3d..097a9ca14d3 100755
@@ -28,7 +28,6 @@ class CentosVM(basevm.BaseVM):
         tar -xf $SRC_ARCHIVE;
         make docker-test-block@centos8 {verbose} J={jobs} NETWORK=1;
         make docker-test-quick@centos8 {verbose} J={jobs} NETWORK=1;
-        make docker-test-mingw@fedora  {verbose} J={jobs} NETWORK=1;
     """
 
     def build_image(self, img):
Signature · 1 line
2.34.3
Reviewed-by on v3 10/13
#25 lore raw

Re: [PATCH v3 10/13] tests/vm: Remove docker cross-compile test from CentOS VM

Quoted 17 lines · John Snow

The fedora container has since been split apart, so there's no suitable nearby target that would support "test-mingw" as it requires both x32 and x64 support -- so either fedora-cross-win32 nor fedora-cross-win64 would be truly suitable.

Just remove this test as superfluous with our current CI infrastructure.

---
 tests/vm/centos | 1 -
 1 file changed, 1 deletion(-)
tests/vm/centos +0 -0
index 3a527c47b3d..097a9ca14d3 100755

tests/vm/centos class CentosVM(basevm.BaseVM): · line 31

Quoted 4 lines
tests/vm/centos +0 -1
@@ -28,7 +28,6 @@ class CentosVM(basevm.BaseVM):
         tar -xf $SRC_ARCHIVE;
         make docker-test-block@centos8 {verbose} J={jobs} NETWORK=1;
         make docker-test-quick@centos8 {verbose} J={jobs} NETWORK=1;
-        make docker-test-mingw@fedora  {verbose} J={jobs} NETWORK=1;

Well it could have been replaced with two:

      make docker-test-mingw@fedora-cross-win32  {verbose} J={jobs} NETWORK=1;
      make docker-test-mingw@fedora-cross-win64  {verbose} J={jobs} NETWORK=1;

I don't mind either way though, and feel this is quite poiintless anyway, since mingw is trivial to test in containers

With regards,
Daniel

Signature · 3 lines
|: https://berrange.com      -o-    https://www.flickr.com/photos/dberrange :|
|: https://libvirt.org         -o-            https://fstop138.berrange.com :|
|: https://entangle-photo.org    -o-    https://www.instagram.com/dberrange :|
author
#26 lore raw

Re: [PATCH v3 10/13] tests/vm: Remove docker cross-compile test from CentOS VM

Quoted 26 lines · Daniel P. Berrangé
Quoted 17 lines · John Snow

The fedora container has since been split apart, so there's no suitable nearby target that would support "test-mingw" as it requires both x32 and x64 support -- so either fedora-cross-win32 nor fedora-cross-win64 would be truly suitable.

Just remove this test as superfluous with our current CI infrastructure.

---
 tests/vm/centos | 1 -
 1 file changed, 1 deletion(-)
tests/vm/centos +0 -0
index 3a527c47b3d..097a9ca14d3 100755

tests/vm/centos class CentosVM(basevm.BaseVM): · line 31

Quoted 4 lines
tests/vm/centos +0 -1
@@ -28,7 +28,6 @@ class CentosVM(basevm.BaseVM):
         tar -xf $SRC_ARCHIVE;
         make docker-test-block@centos8 {verbose} J={jobs} NETWORK=1;
         make docker-test-quick@centos8 {verbose} J={jobs} NETWORK=1;
-        make docker-test-mingw@fedora  {verbose} J={jobs} NETWORK=1;

Well it could have been replaced with two:

Quoted 2 lines
      make docker-test-mingw@fedora-cross-win32  {verbose} J={jobs} NETWORK=1;
      make docker-test-mingw@fedora-cross-win64  {verbose} J={jobs} NETWORK=1;

but "test-mingw" expects to see the dependencies from both win32 and win64, so I'd have to split the test-mingw target, and I am far off course from what I wanted to be doing as-is.

Quoted 6 lines

I don't mind either way though, and feel this is quite poiintless anyway, since mingw is trivial to test in containers

Thanks :)

--js

Quoted 8 lines

With regards,
Daniel
--

|: https://berrange.com      -o-    https://www.flickr.com/photos/dberrange :|
|: https://libvirt.org         -o-            https://fstop138.berrange.com :|
|: https://entangle-photo.org    -o-    https://www.instagram.com/dberrange :|
#27 lore raw

Re: [PATCH v3 10/13] tests/vm: Remove docker cross-compile test from CentOS VM

Quoted 27 lines · John Snow
Quoted 26 lines · Daniel P. Berrangé
Quoted 17 lines · John Snow

The fedora container has since been split apart, so there's no suitable nearby target that would support "test-mingw" as it requires both x32 and x64 support -- so either fedora-cross-win32 nor fedora-cross-win64 would be truly suitable.

Just remove this test as superfluous with our current CI infrastructure.

---
 tests/vm/centos | 1 -
 1 file changed, 1 deletion(-)
tests/vm/centos +0 -0
index 3a527c47b3d..097a9ca14d3 100755

tests/vm/centos class CentosVM(basevm.BaseVM): · line 31

Quoted 4 lines
tests/vm/centos +0 -1
@@ -28,7 +28,6 @@ class CentosVM(basevm.BaseVM):
         tar -xf $SRC_ARCHIVE;
         make docker-test-block@centos8 {verbose} J={jobs} NETWORK=1;
         make docker-test-quick@centos8 {verbose} J={jobs} NETWORK=1;
-        make docker-test-mingw@fedora  {verbose} J={jobs} NETWORK=1;

Well it could have been replaced with two:

Quoted 6 lines
Quoted 2 lines
      make docker-test-mingw@fedora-cross-win32  {verbose} J={jobs} NETWORK=1;
      make docker-test-mingw@fedora-cross-win64  {verbose} J={jobs} NETWORK=1;

but "test-mingw" expects to see the dependencies from both win32 and win64, so I'd have to split the test-mingw target, and I am far off course from what I wanted to be doing as-is.

Oh right, so we should really drop the 'test-mingw' bit entirely as we have nothing it can be used with now. Instead 'test-build' needs to honour $QEMU_CONFIGURE_OPTS, so we can do

make docker-test-build@fedora-cross-win32 (or any of the non-x86
Linux cross containers)

Separate pre-existing problem though, not related to your series.

With regards,
Daniel

Signature · 3 lines
|: https://berrange.com      -o-    https://www.flickr.com/photos/dberrange :|
|: https://libvirt.org         -o-            https://fstop138.berrange.com :|
|: https://entangle-photo.org    -o-    https://www.instagram.com/dberrange :|
author
#28 lore raw

PATCH v3 11/13 tests/qemu-iotests: hotfix for 307, 223 output

In reply to John Snow

Do not merge; staged in Hanna's branch.

---
 tests/qemu-iotests/223.out | 4 ++--
 tests/qemu-iotests/307.out | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)
tests/qemu-iotests/223.out +2 -2
index 06479415312..26fb347c5da 100644
@@ -93,7 +93,7 @@ exports available: 3
  export: 'n2'
   description: some text
   size:  4194304
-  flags: 0xced ( flush fua trim zeroes df cache fast-zero )
+  flags: 0xded ( flush fua trim zeroes df multi cache fast-zero )
   min block: 1
   opt block: 4096
   max block: 33554432
@@ -212,7 +212,7 @@ exports available: 3
  export: 'n2'
   description: some text
   size:  4194304
-  flags: 0xced ( flush fua trim zeroes df cache fast-zero )
+  flags: 0xded ( flush fua trim zeroes df multi cache fast-zero )
   min block: 1
   opt block: 4096
   max block: 33554432
tests/qemu-iotests/307.out +2 -2
index ec8d2be0e0a..390f05d1b78 100644
@@ -83,7 +83,7 @@ exports available: 2
  export: 'export1'
   description: This is the writable second export
   size:  67108864
-  flags: 0xced ( flush fua trim zeroes df cache fast-zero )
+  flags: 0xded ( flush fua trim zeroes df multi cache fast-zero )
   min block: XXX
   opt block: XXX
   max block: XXX
@@ -109,7 +109,7 @@ exports available: 1
  export: 'export1'
   description: This is the writable second export
   size:  67108864
-  flags: 0xced ( flush fua trim zeroes df cache fast-zero )
+  flags: 0xded ( flush fua trim zeroes df multi cache fast-zero )
   min block: XXX
   opt block: XXX
   max block: XXX
Signature · 1 line
2.34.3
author
#29 lore raw

PATCH v3 12/13 tests/qemu-iotests: skip 108 when FUSE is not loaded

In reply to John Snow

Do not merge: Staged in Hanna's branch.

---
 tests/qemu-iotests/108 | 5 +++++
 1 file changed, 5 insertions(+)
tests/qemu-iotests/108 +5 -0
index 9e923d6a59f..54e935acf28 100755
@@ -60,6 +60,11 @@ if sudo -n losetup &>/dev/null; then
 else
     loopdev=false
 
+    # Check for usable FUSE in the host environment:
+    if test ! -c "/dev/fuse"; then
+        _notrun 'No passwordless sudo nor usable /dev/fuse'
+    fi
+
     # QSD --export fuse will either yield "Parameter 'id' is missing"
     # or "Invalid parameter 'fuse'", depending on whether there is
     # FUSE support or not.
Signature · 1 line
2.34.3
author
#30 lore raw

PATCH v3 13/13 iotests: fix copy-before-write for macOS and FreeBSD

In reply to John Snow

From: Vladimir Sementsov-Ogievskiy <[email protected]>

Do not merge: this is a copy of Vladimir's fix that will be taken in through the iotests tree.

---
 tests/qemu-iotests/tests/copy-before-write | 5 +++++
 1 file changed, 5 insertions(+)
tests/qemu-iotests/tests/copy-before-write +5 -0
index 16efebbf8f0..56937b9dfff 100755
@@ -192,6 +192,11 @@ read 1048576/1048576 bytes at offset 0
 
     def test_timeout_break_guest(self):
         log = self.do_cbw_timeout('break-guest-write')
+        # macOS and FreeBSD tend to represent ETIMEDOUT as
+        # "Operation timed out", when Linux prefer
+        # "Connection timed out"
+        log = log.replace('Operation timed out',
+                          'Connection timed out')
         self.assertEqual(log, """\
 wrote 524288/524288 bytes at offset 0
 512 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
Signature · 1 line
2.34.3