pseries-wdt: initial support for H_WATCHDOG-based watchdog timers
Subsystems (3)
v3 cover pseries-wdt: initial support for H_WATCHDOG-based watchdog timers
PAPR v2.12 defines a new hypercall, H_WATCHDOG. This patch series adds support for this hypercall to powerpc/pseries kernels and introduces a new watchdog driver, "pseries-wdt", for the virtual timers exposed by the hypercall.
This series is preceded by the following:
RFC v1: https://lore.kernel.org/linux-watchdog/[email protected]/
RFC v2: https://lore.kernel.org/linux-watchdog/[email protected]/
PATCH v1: https://lore.kernel.org/linux-watchdog/[email protected]/
PATCH v2: https://lore.kernel.org/linux-watchdog/[email protected]/
Changes of note from PATCH v2:
- Don't keep a pointer to the platform device at registration time. We don't use the pointer for anything and we cannot hotplug the "device".
- Drop the GETFIELD() and SETFIELD() macros: Michael Ellerman really doesn't like them. Use plain integer constants and custom bitfield extraction macros for the capability output instead.
(After making the change I can see the upside to plain constants.)
- Actually use PSERIES_WDTQ_MAX_NUMBER(): check that the hypervisor gave us at least one timer to work with.
- Use MSEC_PER_SEC in a few places instead of the literal 1000 to show the reader what we're doing.
- Use "reverse xmas tree" sorting for automatic variable declarations.
- Note where the max_timeout of (UINT_MAX / 1000) comes from.
- Nix email addresses from the MODULE_AUTHOR() macros, they tend to rot.
PATCH v3 1/4 powerpc/pseries: hvcall.h: add H_WATCHDOG opcode, H_NOOP return code
PAPR v2.12 defines a new hypercall, H_WATCHDOG. The hypercall permits guest control of one or more virtual watchdog timers.
Add the opcode for the H_WATCHDOG hypercall to hvcall.h. While here, add a definition for H_NOOP, a possible return code for H_WATCHDOG.
--- arch/powerpc/include/asm/hvcall.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
arch/powerpc/include/asm/hvcall.h +3 -1
@@ -87,6 +87,7 @@#define H_P7 -60#define H_P8 -61#define H_P9 -62 +#define H_NOOP -63#define H_TOO_BIG -64#define H_UNSUPPORTED -67#define H_OVERLAP -68
@@ -324,7 +325,8 @@#define H_RPT_INVALIDATE 0x448#define H_SCM_FLUSH 0x44C#define H_GET_ENERGY_SCALE_INFO 0x450 -#define MAX_HCALL_OPCODE H_GET_ENERGY_SCALE_INFO +#define H_WATCHDOG 0x45C +#define MAX_HCALL_OPCODE H_WATCHDOG/* Scope args for H_SCM_UNBIND_ALL */ #define H_UNBIND_SCOPE_ALL (0x1)
Signature · 1 line
2.27.0
PATCH v3 2/4 powerpc/pseries: add FW_FEATURE_WATCHDOG flag
In reply to Scott ChelohaPAPR v2.12 specifies a new optional function set, "hcall-watchdog", for the /rtas/ibm,hypertas-functions property. The presence of this function set indicates support for the H_WATCHDOG hypercall.
Check for this function set and, if present, set the new FW_FEATURE_WATCHDOG flag.
--- arch/powerpc/include/asm/firmware.h | 3 ++- arch/powerpc/platforms/pseries/firmware.c | 1 + 2 files changed, 3 insertions(+), 1 deletion(-)
arch/powerpc/include/asm/firmware.h +2 -1
@@ -55,6 +55,7 @@#define FW_FEATURE_RPT_INVALIDATE ASM_CONST(0x0000010000000000)#define FW_FEATURE_FORM2_AFFINITY ASM_CONST(0x0000020000000000)#define FW_FEATURE_ENERGY_SCALE_INFO ASM_CONST(0x0000040000000000) +#define FW_FEATURE_WATCHDOG ASM_CONST(0x0000080000000000)#ifndef __ASSEMBLY__
@@ -76,7 +77,7 @@ enum {FW_FEATURE_DRC_INFO |FW_FEATURE_BLOCK_REMOVE |FW_FEATURE_PAPR_SCM |FW_FEATURE_ULTRAVISOR |FW_FEATURE_RPT_INVALIDATE |FW_FEATURE_FORM2_AFFINITY | -FW_FEATURE_ENERGY_SCALE_INFO , +FW_FEATURE_ENERGY_SCALE_INFO |FW_FEATURE_WATCHDOG ,FW_FEATURE_PSERIES_ALWAYS =0 ,FW_FEATURE_POWERNV_POSSIBLE =FW_FEATURE_OPAL |FW_FEATURE_ULTRAVISOR , FW_FEATURE_POWERNV_ALWAYS = 0,
arch/powerpc/platforms/pseries/firmware.c +1 -0
@@ -67,6 +67,7 @@ hypertas_fw_features_table[] = { {FW_FEATURE_PAPR_SCM, "hcall-scm"}, {FW_FEATURE_RPT_INVALIDATE, "hcall-rpt-invalidate"}, {FW_FEATURE_ENERGY_SCALE_INFO, "hcall-energy-scale-info"}, + {FW_FEATURE_WATCHDOG, "hcall-watchdog"}, };/* Build up the firmware features bitmask using the contents of
Signature · 1 line
2.27.0
PATCH v3 3/4 powerpc/pseries: register pseries-wdt device with platform bus
In reply to Scott ChelohaPAPR v2.12 defines a new hypercall, H_WATCHDOG. The hypercall permits guest control of one or more virtual watchdog timers.
These timers do not conform to PowerPC device conventions. They are not affixed to any extant bus, nor do they have full representation in the device tree.
As a workaround we represent them as platform devices.
This patch registers a single platform device, "pseries-wdt", with the platform bus if the FW_FEATURE_WATCHDOG flag is set.
A driver for this device, "pseries-wdt", will be introduced in a subsequent patch.
--- arch/powerpc/platforms/pseries/setup.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)
arch/powerpc/platforms/pseries/setup.c +13 -0
@@ -14,6 +14,7 @@#include <linux/cpu.h> #include <linux/errno.h> +#include <linux/platform_device.h> #include <linux/sched.h> #include <linux/kernel.h> #include <linux/mm.h>
@@ -169,6 +170,18 @@ static void __init fwnmi_init(void)#endif } +/* +* Affix a device for the first timer to the platform bus if +* we have firmware support for the H_WATCHDOG hypercall. +*/ +static __init int pseries_wdt_init (void ) +{ +if (firmware_has_feature (FW_FEATURE_WATCHDOG )) +platform_device_register_simple ("pseries-wdt" ,0 ,NULL ,0 ); +return 0 ; +} +machine_subsys_initcall (pseries, pseries_wdt_init); +static void pseries_8259_cascade (struct irq_desc *desc) {struct irq_chip *chip =irq_desc_get_chip (desc);
Signature · 1 line
2.27.0
PATCH v3 4/4 watchdog/pseries-wdt: initial support for H_WATCHDOG-based watchdog timers
In reply to Scott ChelohaPAPR v2.12 defines a new hypercall, H_WATCHDOG. The hypercall permits guest control of one or more virtual watchdog timers. The timers have millisecond granularity. The guest is terminated when a timer expires.
This patch adds a watchdog driver for these timers, "pseries-wdt".
pseries_wdt_probe() currently assumes the existence of only one platform device and always assigns it watchdogNumber 1. If we ever expose more than one timer to userspace we will need to devise a way to assign a distinct watchdogNumber to each platform device at device registration time.
--- .../watchdog/watchdog-parameters.rst | 12 + drivers/watchdog/Kconfig | 8 + drivers/watchdog/Makefile | 1 + drivers/watchdog/pseries-wdt.c | 239 ++++++++++++++++++ 4 files changed, 260 insertions(+) create mode 100644 drivers/watchdog/pseries-wdt.c
Documentation/watchdog/watchdog-parameters.rst +12 -0
@@ -425,6 +425,18 @@ pnx833x_wdt: ------------------------------------------------- +pseries-wdt: + action: + Action taken when watchdog expires: 0 (power off), 1 (restart), + 2 (dump and restart). (default=1) + timeout: + Initial watchdog timeout in seconds. (default=60) + nowayout: + Watchdog cannot be stopped once started. + (default=kernel config parameter) + +------------------------------------------------- + rc32434_wdt: timeout: Watchdog timeout value, in seconds (default=20)
drivers/watchdog/Kconfig +8 -0
@@ -1962,6 +1962,14 @@ config MEN_A21_WDT # PPC64 Architecture +config PSERIES_WDT + tristate "POWER Architecture Platform Watchdog Timer" + depends on PPC_PSERIES + select WATCHDOG_CORE + help + Driver for virtual watchdog timers provided by PAPR + hypervisors (e.g. PowerVM, KVM). + config WATCHDOG_RTAS tristate "RTAS watchdog" depends on PPC_RTAS
drivers/watchdog/Makefile +1 -0
@@ -187,6 +187,7 @@ obj-$(CONFIG_BOOKE_WDT) += booke_wdt.o obj-$(CONFIG_MEN_A21_WDT) += mena21_wdt.o # PPC64 Architecture +obj-$(CONFIG_PSERIES_WDT) += pseries-wdt.o obj-$(CONFIG_WATCHDOG_RTAS) += wdrtas.o # S390 Architecture
drivers/watchdog/pseries-wdt.c new file +239 -0
239 lines not on this page · raw message
Signature · 1 line
2.27.0
Re: [PATCH v3 4/4] watchdog/pseries-wdt: initial support for H_WATCHDOG-based watchdog timers
Quoted 7 lines · Scott Cheloha
PAPR v2.12 defines a new hypercall,
H_WATCHDOG. The hypercall permits guest control of one or more virtual watchdog timers. The timers have millisecond granularity. The guest is terminated when a timer expires.This patch adds a watchdog driver for these timers, "pseries-wdt".
Quoted 7 lines
pseries_wdt_probe()currently assumes the existence of only one platform device and always assigns it watchdogNumber 1. If we ever expose more than one timer to userspace we will need to devise a way to assign a distinct watchdogNumber to each platform device at device registration time.Signed-off-by Scott Cheloha <[email protected]>
Quoted 307 lines
--- .../watchdog/watchdog-parameters.rst | 12 + drivers/watchdog/Kconfig | 8 + drivers/watchdog/Makefile | 1 + drivers/watchdog/pseries-wdt.c | 239 ++++++++++++++++++ 4 files changed, 260 insertions(+)create mode 100644
drivers/watchdog/pseries-wdt.cDocumentation/watchdog/watchdog-parameters.rst +12
-0@@ -425,6 +425,18 @@ pnx833x_wdt: ------------------------------------------------- +pseries-wdt: + action: + Action taken when watchdog expires: 0 (power off), 1 (restart), + 2 (dump and restart). (default=1) + timeout: + Initial watchdog timeout in seconds. (default=60) + nowayout: + Watchdog cannot be stopped once started. + (default=kernel config parameter) + +------------------------------------------------- + rc32434_wdt: timeout: Watchdog timeout value, in seconds (default=20)drivers/watchdog/Kconfig +8
-0@@ -1962,6 +1962,14 @@ config MEN_A21_WDT # PPC64 Architecture +config PSERIES_WDT + tristate "POWER Architecture Platform Watchdog Timer" + depends on PPC_PSERIES + select WATCHDOG_CORE + help + Driver for virtual watchdog timers provided by PAPR + hypervisors (e.g. PowerVM, KVM). + config WATCHDOG_RTAS tristate "RTAS watchdog" depends on PPC_RTASdrivers/watchdog/Makefile +1
-0@@ -187,6 +187,7 @@ obj-$(CONFIG_BOOKE_WDT) += booke_wdt.o obj-$(CONFIG_MEN_A21_WDT) += mena21_wdt.o # PPC64 Architecture +obj-$(CONFIG_PSERIES_WDT) += pseries-wdt.o obj-$(CONFIG_WATCHDOG_RTAS) += wdrtas.o # S390 Architecturedrivers/watchdog/pseries-wdt.c new file +239
-0@@ -0,0 +1,239 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* +* Copyright (c) 2022 International Business Machines, Inc. +*/ + +#include <linux/bitops.h> +#include <linux/kernel.h> +#include <linux/limits.h> +#include <linux/math.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/platform_device.h> +#include <linux/time64.h> +#include <linux/watchdog.h> + +#define DRV_NAME "pseries-wdt" + +/* +* H_WATCHDOG Input +* +* R4: "flags": +* +* Bits 48-55: "operation" +*/ +#define PSERIES_WDTF_OP_START 0x100UL/* start timer */ +#define PSERIES_WDTF_OP_STOP 0x200UL/* stop timer */ +#define PSERIES_WDTF_OP_QUERY 0x300UL/* query timer capabilities */ + +/* +* Bits 56-63: "timeoutAction" (for "Start Watchdog" only) +*/ +#define PSERIES_WDTF_ACTION_HARD_POWEROFF 0x1UL/* poweroff */ +#define PSERIES_WDTF_ACTION_HARD_RESTART 0x2UL/* restart */ +#define PSERIES_WDTF_ACTION_DUMP_RESTART 0x3UL/* dump + restart */ + +/* +* H_WATCHDOG Output +* +* R3: Return code +* +* H_SUCCESS The operation completed. +* +* H_BUSY The hypervisor is too busy; retry the operation. +* +* H_PARAMETER The given "flags" are somehow invalid. Either the +* "operation" or "timeoutAction" is invalid, or a +* reserved bit is set. +* +* H_P2 The given "watchdogNumber" is zero or exceeds the +* supported maximum value. +* +* H_P3 The given "timeoutInMs" is below the supported +* minimum value. +* +* H_NOOP The given "watchdogNumber" is already stopped. +* +* H_HARDWARE The operation failed for ineffable reasons. +* +* H_FUNCTION The H_WATCHDOG hypercall is not supported by this +* hypervisor. +* +* R4: +* +* - For the "Query Watchdog Capabilities" operation, a 64-bit +* structure: +*/ +#define PSERIES_WDTQ_MIN_TIMEOUT (cap) (((cap) >> 48) & 0xffff) +#define PSERIES_WDTQ_MAX_NUMBER (cap) (((cap) >> 32) & 0xffff) + +static const unsigned long pseries_wdt_action[] = { + [0 ] =PSERIES_WDTF_ACTION_HARD_POWEROFF , + [1 ] =PSERIES_WDTF_ACTION_HARD_RESTART , + [2 ] =PSERIES_WDTF_ACTION_DUMP_RESTART , +}; + +#define WATCHDOG_ACTION 1 +static unsigned int action =WATCHDOG_ACTION ; +module_param (action, uint,0444 ); +MODULE_PARM_DESC(action, "Action taken when watchdog expires (default=" + __MODULE_STRING(WATCHDOG_ACTION) ")"); + +static bool nowayout =WATCHDOG_NOWAYOUT ; +module_param (nowayout, bool,0444 ); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +#define WATCHDOG_TIMEOUT 60 +static unsigned int timeout =WATCHDOG_TIMEOUT ; +module_param (timeout, uint,0444 ); +MODULE_PARM_DESC(timeout, "Initial watchdog timeout in seconds (default=" + __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); + +struct pseries_wdt { +struct watchdog_device wd; +unsigned long action; +unsigned long num;/* Watchdog numbers are 1-based */ +}; + +static int pseries_wdt_start (struct watchdog_device *wdd) +{ +struct pseries_wdt *pw =watchdog_get_drvdata (wdd); +struct device *dev = wdd->parent; +unsigned long flags, msecs; +long rc; + + flags = pw->action |PSERIES_WDTF_OP_START ; + msecs = wdd->timeout *MSEC_PER_SEC ; + rc =plpar_hcall_norets (H_WATCHDOG , flags, pw->num, msecs); +if (rc !=H_SUCCESS ) { +dev_crit (dev,"H_WATCHDOG: %ld: failed to start timer %lu" , + rc, pw->num); +return -EIO ; + } +return 0 ; +} + +static int pseries_wdt_stop (struct watchdog_device *wdd) +{ +struct pseries_wdt *pw =watchdog_get_drvdata (wdd); +struct device *dev = wdd->parent; +long rc; + + rc =plpar_hcall_norets (H_WATCHDOG ,PSERIES_WDTF_OP_STOP , pw->num); +if (rc !=H_SUCCESS && rc !=H_NOOP ) { +dev_crit (dev,"H_WATCHDOG: %ld: failed to stop timer %lu" , + rc, pw->num); +return -EIO ; + } +return 0 ; +} + +static struct watchdog_info pseries_wdt_info = { + .identity =DRV_NAME , + .options =WDIOF_KEEPALIVEPING |WDIOF_MAGICCLOSE |WDIOF_SETTIMEOUT + |WDIOF_PRETIMEOUT , +}; + +static const struct watchdog_ops pseries_wdt_ops = { + .owner =THIS_MODULE , + .start = pseries_wdt_start, + .stop = pseries_wdt_stop, +}; + +static int pseries_wdt_probe (struct platform_device *pdev) +{ +unsigned long ret[PLPAR_HCALL_BUFSIZE ] = {0 }; +struct pseries_wdt *pw; +unsigned long cap; +long msecs, rc; +int err; + + rc =plpar_hcall (H_WATCHDOG , ret,PSERIES_WDTF_OP_QUERY ); +if (rc ==H_FUNCTION ) +return -ENODEV ; +if (rc !=H_SUCCESS ) +return -EIO ; + cap = ret[0 ]; + + pw =devm_kzalloc (&pdev->dev,sizeof (*pw),GFP_KERNEL ); +if (!pw) +return -ENOMEM ; + +/* +* Assume watchdogNumber 1 for now. If we ever support +* multiple timers we will need to devise a way to choose a +* distinct watchdogNumber for each platform device at device +* registration time. +*/ + pw->num =1 ; +if (PSERIES_WDTQ_MAX_NUMBER (cap) < pw->num) +return -ENODEV ; + +if (action >=ARRAY_SIZE (pseries_wdt_action)) +return -EINVAL ; + pw->action = pseries_wdt_action[action]; + + pw->wd.parent = &pdev->dev; + pw->wd.info = &pseries_wdt_info; + pw->wd.ops = &pseries_wdt_ops; + msecs =PSERIES_WDTQ_MIN_TIMEOUT (cap); + pw->wd.min_timeout =DIV_ROUND_UP (msecs,MSEC_PER_SEC ); + pw->wd.max_timeout =UINT_MAX /1000 ;/* from linux/watchdog.h */ + pw->wd.timeout = timeout; +if (watchdog_init_timeout (&pw->wd,0 ,NULL )) +return -EINVAL ; +watchdog_set_nowayout (&pw->wd, nowayout); +watchdog_stop_on_reboot (&pw->wd); +watchdog_stop_on_unregister (&pw->wd); +watchdog_set_drvdata (&pw->wd, pw); + + err =devm_watchdog_register_device (&pdev->dev, &pw->wd); +if (err) +return err; + +platform_set_drvdata (pdev, &pw->wd); + +return 0 ; +} + +static int pseries_wdt_suspend (struct platform_device *pdev,pm_message_t state) +{ +struct watchdog_device *wd =platform_get_drvdata (pdev); + +if (watchdog_active (wd)) +return pseries_wdt_stop (wd); +return 0 ; +} + +static int pseries_wdt_resume (struct platform_device *pdev) +{ +struct watchdog_device *wd =platform_get_drvdata (pdev); + +if (watchdog_active (wd)) +return pseries_wdt_start (wd); +return 0 ; +} + +static const struct platform_device_id pseries_wdt_id[] = { + { .name ="pseries-wdt" }, + {} +}; +MODULE_DEVICE_TABLE (platform, pseries_wdt_id); + +static struct platform_driver pseries_wdt_driver = { + .driver = { + .name =DRV_NAME , + }, + .id_table = pseries_wdt_id, + .probe = pseries_wdt_probe, + .resume = pseries_wdt_resume, + .suspend = pseries_wdt_suspend, +}; +module_platform_driver (pseries_wdt_driver); + +MODULE_AUTHOR ("Alexey Kardashevskiy" ); +MODULE_AUTHOR ("Scott Cheloha" ); +MODULE_DESCRIPTION ("POWER Architecture Platform Watchdog Driver" ); +MODULE_LICENSE ("GPL" );
Re: [PATCH v3 4/4] watchdog/pseries-wdt: initial support for H_WATCHDOG-based watchdog timers
Quoted 14 lines · Guenter Roeck
Quoted 13 lines · Scott Cheloha
PAPR v2.12 defines a new hypercall,
H_WATCHDOG. The hypercall permits guest control of one or more virtual watchdog timers. The timers have millisecond granularity. The guest is terminated when a timer expires.This patch adds a watchdog driver for these timers, "pseries-wdt".
pseries_wdt_probe()currently assumes the existence of only one platform device and always assigns it watchdogNumber 1. If we ever expose more than one timer to userspace we will need to devise a way to assign a distinct watchdogNumber to each platform device at device registration time.
Quoted 3 lines
Quoted 1 line
Signed-off-by Scott Cheloha <[email protected]>Acked-by Guenter Roeck <[email protected]>
Guenter, Michael,
Which tree is taking this series?
watchdog-next or PPC development?
-Scott
Guenter Roeck
maintainerRe: [PATCH v3 4/4] watchdog/pseries-wdt: initial support for H_WATCHDOG-based watchdog timers
Quoted 15 lines · Scott Cheloha
Quoted 14 lines · Guenter Roeck
Quoted 13 lines · Scott Cheloha
PAPR v2.12 defines a new hypercall,
H_WATCHDOG. The hypercall permits guest control of one or more virtual watchdog timers. The timers have millisecond granularity. The guest is terminated when a timer expires.This patch adds a watchdog driver for these timers, "pseries-wdt".
pseries_wdt_probe()currently assumes the existence of only one platform device and always assigns it watchdogNumber 1. If we ever expose more than one timer to userspace we will need to devise a way to assign a distinct watchdogNumber to each platform device at device registration time.
Quoted 8 lines
Quoted 3 lines
Quoted 1 line
Signed-off-by Scott Cheloha <[email protected]>Acked-by Guenter Roeck <[email protected]>Guenter, Michael,
Which tree is taking this series?
The series includes non-watchdog changes, so my expectation was that some other tree would take it.
Guenter
Quoted 3 lines
watchdog-next or PPC development?
-Scott
Michael Ellerman
reviewerRe: [PATCH v3 4/4] watchdog/pseries-wdt: initial support for H_WATCHDOG-based watchdog timers
Quoted 16 lines · Guenter Roeck
Quoted 15 lines · Scott Cheloha
Quoted 14 lines · Guenter Roeck
Quoted 13 lines · Scott Cheloha
PAPR v2.12 defines a new hypercall,
H_WATCHDOG. The hypercall permits guest control of one or more virtual watchdog timers. The timers have millisecond granularity. The guest is terminated when a timer expires.This patch adds a watchdog driver for these timers, "pseries-wdt".
pseries_wdt_probe()currently assumes the existence of only one platform device and always assigns it watchdogNumber 1. If we ever expose more than one timer to userspace we will need to devise a way to assign a distinct watchdogNumber to each platform device at device registration time.
Quoted 7 lines
Quoted 7 lines
Quoted 3 lines
Quoted 1 line
Signed-off-by Scott Cheloha <[email protected]>Acked-by Guenter Roeck <[email protected]>Guenter, Michael,
Which tree is taking this series?
powerpc.
It's been in next-test/next for about a week.
It's in linux-next today.
Quoted 2 lines
The series includes non-watchdog changes, so my expectation was that some other tree would take it.
Yep, thanks for the ack.
cheers
Michael Ellerman
AppliedQuoted 8 lines · Scott Cheloha
PAPR v2.12 defines a new hypercall,
H_WATCHDOG. This patch series adds support for this hypercall to powerpc/pseries kernels and introduces a new watchdog driver, "pseries-wdt", for the virtual timers exposed by the hypercall.This series is preceded by the following:
[...]
Applied to powerpc/next.
[1/4] powerpc/pseries: hvcall.h: add H_WATCHDOG opcode, H_NOOP return code
https://git.kernel.org/powerpc/c/c6b2bd262b33aa2451f52aec2190131d1762945a [2/4] powerpc/pseries: add FW_FEATURE_WATCHDOG flag https://git.kernel.org/powerpc/c/1621563ec62ff143c7b817dd5eab0884cdfaf89d [3/4] powerpc/pseries: register pseries-wdt device with platform bus https://git.kernel.org/powerpc/c/578030bfe117060bf86c81aaa7b3faead4589810 [4/4] watchdog/pseries-wdt: initial support for H_WATCHDOG-based watchdog timers https://git.kernel.org/powerpc/c/69472ffa6575e3a1c1e3324dd06395af0f63eb71
cheers