dt-bindings: PCI: fsl,imx6q-pcie: Add missing type for 'reset-gpio-active-high'
Subsystems (5)
Rob Herring
maintainerPATCH 1/1 dt-bindings: PCI: fsl,imx6q-pcie: Add missing type for 'reset-gpio-active-high'
'reset-gpio-active-high' is missing a type definition and is not a common property. The type is boolean.
--- Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml +1 -0
@@ -144,6 +144,7 @@ properties: description: If present then the reset sequence using the GPIO specified in the "reset-gpio" property is reversed (H=reset state, L=operation state) (optional required). + type: boolean vpcie-supply: description: Should specify the regulator in charge of PCIe port power.
Signature · 1 line
2.34.1
Hi Rob:
Thanks for your kindly help.
Quoted 14 lines
-----Original Message-----
From: Rob Herring <[email protected]>
Sent: 2022年7月20日 5:51
To: Hongxing Zhu <[email protected]>; Lucas Stach <[email protected]>; Bjorn Helgaas <[email protected]>; Krzysztof Kozlowski <[email protected]>; Shawn Guo <[email protected]>; Sascha Hauer <[email protected]>; Pengutronix Kernel Team <[email protected]>; Fabio Estevam <[email protected]>; dl-linux-imx <[email protected]>
Cc: [email protected]; [email protected]; [email protected]; [email protected]
Subject: [PATCH] dt-bindings: PCI: fsl,imx6q-pcie: Add missing type for 'reset-gpio-active-high'
Quoted 4 lines
'reset-gpio-active-high' is missing a type definition and is not a common property. The type is boolean.
Signed-off-by Rob Herring <[email protected]>
Best Regards
Richard Zhu
Quoted 18 lines
--- Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml | 1 + 1 file changed, 1 insertion(+)Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml +1
-1@@ -144,6 +144,7 @@ properties: description: If present then the reset sequence using the GPIO specified in the "reset-gpio" property is reversed (H=reset state, L=operation state) (optional required). + type: boolean vpcie-supply: description: Should specify the regulator in charge of PCIe port power. --
Quoted 1 line
2.34.1
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Quoted 4 lines · Rob Herring
'reset-gpio-active-high' is missing a type definition and is not a common property. The type is boolean.
Signed-off-by Rob Herring <[email protected]>
You've merged previous updates, Rob, so I assume you'll do the same with this.
Quoted 24 lines
--- Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml | 1 + 1 file changed, 1 insertion(+)Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml +1
-0@@ -144,6 +144,7 @@ properties: description: If present then the reset sequence using the GPIO specified in the "reset-gpio" property is reversed (H=reset state, L=operation state) (optional required). + type: boolean vpcie-supply: description: Should specify the regulator in charge of PCIe port power.Signature · 7 lines
2.34.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Quoted 8 lines · Rob Herring
'reset-gpio-active-high' is missing a type definition and is not a common property. The type is boolean.
Signed-off-by Rob Herring <[email protected]>--- Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml | 1 + 1 file changed, 1 insertion(+)
Applied, thanks!