Skip to contentSkip to conversation

dt-bindings: PCI: fsl,imx6q-pcie: Add missing type for 'reset-gpio-active-high'

PATCH Applied Rob Herring 3 participants 4 messages Jul 19, 2022 – Jul 22, 2022

Subsystems (5)
lore
Share & tools
lore

Rob Herring

author maintainer
#0 lore raw

PATCH 1/1 dt-bindings: PCI: fsl,imx6q-pcie: Add missing type for 'reset-gpio-active-high'

'reset-gpio-active-high' is missing a type definition and is not a common property. The type is boolean.

---
 Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml +1 -0
index 252e5b72aee0..376e739bcad4 100644
@@ -144,6 +144,7 @@ properties:
     description: If present then the reset sequence using the GPIO
       specified in the "reset-gpio" property is reversed (H=reset state,
       L=operation state) (optional required).
+    type: boolean
 
   vpcie-supply:
     description: Should specify the regulator in charge of PCIe port power.
Signature · 1 line
2.34.1
maintainer Acked-by on v1 1/1
#1 lore raw

Hi Rob:
Thanks for your kindly help.

Quoted 14 lines

-----Original Message-----
From: Rob Herring <[email protected]>
Sent: 2022年7月20日 5:51
To: Hongxing Zhu <[email protected]>; Lucas Stach <[email protected]>; Bjorn Helgaas <[email protected]>; Krzysztof Kozlowski <[email protected]>; Shawn Guo <[email protected]>; Sascha Hauer <[email protected]>; Pengutronix Kernel Team <[email protected]>; Fabio Estevam <[email protected]>; dl-linux-imx <[email protected]>
Cc: [email protected]; [email protected]; [email protected]; [email protected]
Subject: [PATCH] dt-bindings: PCI: fsl,imx6q-pcie: Add missing type for 'reset-gpio-active-high'

Quoted 4 lines

'reset-gpio-active-high' is missing a type definition and is not a common property. The type is boolean.

Best Regards
Richard Zhu

Quoted 18 lines
---
 Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml +1 -1
index 252e5b72aee0..376e739bcad4 100644
@@ -144,6 +144,7 @@ properties:
     description: If present then the reset sequence using the GPIO
       specified in the "reset-gpio" property is reversed (H=reset state,
       L=operation state) (optional required).
+    type: boolean
 
   vpcie-supply:
     description: Should specify the regulator in charge of PCIe port power.
--
Quoted 1 line

2.34.1

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

#2 lore raw
In reply to Rob Herring
Quoted 4 lines · Rob Herring

'reset-gpio-active-high' is missing a type definition and is not a common property. The type is boolean.

You've merged previous updates, Rob, so I assume you'll do the same with this.

Quoted 24 lines
---
 Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml +1 -0
index 252e5b72aee0..376e739bcad4 100644
@@ -144,6 +144,7 @@ properties:
     description: If present then the reset sequence using the GPIO
       specified in the "reset-gpio" property is reversed (H=reset state,
       L=operation state) (optional required).
+    type: boolean
 
   vpcie-supply:
     description: Should specify the regulator in charge of PCIe port power.
Signature · 7 lines
2.34.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
author maintainer Applied
#3 lore raw
In reply to Rob Herring
Quoted 8 lines · Rob Herring

'reset-gpio-active-high' is missing a type definition and is not a common property. The type is boolean.

---
 Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml | 1 +
 1 file changed, 1 insertion(+)

Applied, thanks!