Skip to contentSkip to conversation

Add support for parallel port devices Netmos 9900 and Asix 99100

PATCH In review Alexander Baehr 2 participants 5 messages Aug 6, 2022 – Sep 1, 2022

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

cover Add support for parallel port devices Netmos 9900 and Asix 99100

Support for the established parallel port devices Netmos 9900 and Asix 99100 was lacking. This patch queue adds support for them and was successfullly tested on the two devices.

#1 lore raw

PATCH 1/2 Add parport support for Netmos device 9900

The Netmos parallel port 9901 was already supported but the device 9900 was not. This patch adds the required settings for it and was successfully tested with the Netmos device 9900.

---
 drivers/parport/parport_pc.c |    4 ++++
 1 file changed, 4 insertions(+)
drivers/parport/parport_pc.c +4 -0
Index: linux-5.19.0-rt7/drivers/parport/parport_pc.c
===================================================================
@@ -2604,6 +2604,7 @@ enum parport_pc_pci_cards {
 	oxsemi_pcie_pport,
 	aks_0100,
 	mobility_pp,
+	netmos_9900,
 	netmos_9705,
 	netmos_9715,
 	netmos_9755,
@@ -2665,6 +2666,7 @@ static struct parport_pc_pci {
 	/* oxsemi_pcie_pport */		{ 1, { { 0, 1 }, } },
 	/* aks_0100 */                  { 1, { { 0, -1 }, } },
 	/* mobility_pp */		{ 1, { { 0, 1 }, } },
+	/* netmos_9900 */		{ 1, { { 0, -1 }, } },
 
 	/* The netmos entries below are untested */
 	/* netmos_9705 */               { 1, { { 0, -1 }, } },
@@ -2746,6 +2748,8 @@ static const struct pci_device_id parpor
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, aks_0100 },
 	{ 0x14f2, 0x0121, PCI_ANY_ID, PCI_ANY_ID, 0, 0, mobility_pp },
 	/* NetMos communication controllers */
+	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900,
+	  0xA000, 0x2000, 0, 0, netmos_9900 },
 	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9705,
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9705 },
 	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9715,
#2 lore raw

PATCH 2/2 Add parport support for Asix device 99100

In reply to Alexander Baehr

For some reason, Asix decided to produce a parallel port that is fully compatible with Netmos device 9900, but named it 99100. It obviously has another vendor ID, but the device ID is the same. This patch adds the required settings and was successfully tested with the Asix device.

---
 drivers/parport/parport_pc.c |    4 ++++
 include/linux/pci_ids.h      |    3 +++
 2 files changed, 7 insertions(+)
drivers/parport/parport_pc.c +4 -0
Index: linux/drivers/parport/parport_pc.c
===================================================================
@@ -2612,6 +2612,7 @@ enum parport_pc_pci_cards {
 	netmos_9815,
 	netmos_9901,
 	netmos_9865,
+	asix_ax99100,
 	quatech_sppxp100,
 	wch_ch382l,
 };
@@ -2766,6 +2767,9 @@ static const struct pci_device_id parpor
 	  0xA000, 0x1000, 0, 0, netmos_9865 },
 	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
 	  0xA000, 0x2000, 0, 0, netmos_9865 },
+	/* Asix AX99100 Parallel port PCIExpressCard */
+	{ PCI_VENDOR_ID_ASIX, PCI_DEVICE_ID_AX99100,
+	  0xA000, 0x2000, 0, 0, netmos_9900 },
 	/* Quatech SPPXP-100 Parallel port PCI ExpressCard */
 	{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SPPXP_100,
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, quatech_sppxp100 },
include/linux/pci_ids.h +3 -0
Index: linux/include/linux/pci_ids.h
===================================================================
@@ -3108,4 +3108,7 @@
 
 #define PCI_VENDOR_ID_NCUBE		0x10ff
 
+#define PCI_VENDOR_ID_ASIX		0x125b
+#define PCI_DEVICE_ID_AX99100		0x9100
+
 #endif /* _LINUX_PCI_IDS_H */
#3 lore raw

Re: [PATCH 2/2] Add parport support for Asix device 99100

Quoted 38 lines · Alexander Baehr

For some reason, Asix decided to produce a parallel port that is fully compatible with Netmos device 9900, but named it 99100. It obviously has another vendor ID, but the device ID is the same. This patch adds the required settings and was successfully tested with the Asix device.

---
 drivers/parport/parport_pc.c |    4 ++++
 include/linux/pci_ids.h      |    3 +++
 2 files changed, 7 insertions(+)

Index: linux/drivers/parport/parport_pc.c
===================================================================

drivers/parport/parport_pc.c +4 -0
@@ -2612,6 +2612,7 @@ enum parport_pc_pci_cards {
 	netmos_9815,
 	netmos_9901,
 	netmos_9865,
+	asix_ax99100,
 	quatech_sppxp100,
 	wch_ch382l,
 };
@@ -2766,6 +2767,9 @@ static const struct pci_device_id parpor
 	  0xA000, 0x1000, 0, 0, netmos_9865 },
 	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
 	  0xA000, 0x2000, 0, 0, netmos_9865 },
+	/* Asix AX99100 Parallel port PCIExpressCard */
+	{ PCI_VENDOR_ID_ASIX, PCI_DEVICE_ID_AX99100,
+	  0xA000, 0x2000, 0, 0, netmos_9900 },
 	/* Quatech SPPXP-100 Parallel port PCI ExpressCard */
 	{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SPPXP_100,
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, quatech_sppxp100 },

Index: linux/include/linux/pci_ids.h
===================================================================

include/linux/pci_ids.h line 3112

Quoted 5 lines
include/linux/pci_ids.h +2 -0
@@ -3108,4 +3108,7 @@
 
 #define PCI_VENDOR_ID_NCUBE		0x10ff
 
+#define PCI_VENDOR_ID_ASIX		0x125b
+#define PCI_DEVICE_ID_AX99100		0x9100

Please read the top of this file for why we shouldn't be added new entries to it.

thanks,

greg k-h

#4 lore raw

Re: [PATCH 2/2] Add parport support for Asix device 99100

In reply to Alexander Baehr
Quoted 38 lines · Alexander Baehr

For some reason, Asix decided to produce a parallel port that is fully compatible with Netmos device 9900, but named it 99100. It obviously has another vendor ID, but the device ID is the same. This patch adds the required settings and was successfully tested with the Asix device.

---
 drivers/parport/parport_pc.c |    4 ++++
 include/linux/pci_ids.h      |    3 +++
 2 files changed, 7 insertions(+)

Index: linux/drivers/parport/parport_pc.c
===================================================================

drivers/parport/parport_pc.c +4 -0
@@ -2612,6 +2612,7 @@ enum parport_pc_pci_cards {
 	netmos_9815,
 	netmos_9901,
 	netmos_9865,
+	asix_ax99100,
 	quatech_sppxp100,
 	wch_ch382l,
 };
@@ -2766,6 +2767,9 @@ static const struct pci_device_id parpor
 	  0xA000, 0x1000, 0, 0, netmos_9865 },
 	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
 	  0xA000, 0x2000, 0, 0, netmos_9865 },
+	/* Asix AX99100 Parallel port PCIExpressCard */
+	{ PCI_VENDOR_ID_ASIX, PCI_DEVICE_ID_AX99100,
+	  0xA000, 0x2000, 0, 0, netmos_9900 },
 	/* Quatech SPPXP-100 Parallel port PCI ExpressCard */
 	{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SPPXP_100,
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, quatech_sppxp100 },

Index: linux/include/linux/pci_ids.h
===================================================================

include/linux/pci_ids.h line 3112

Quoted 5 lines
include/linux/pci_ids.h +2 -0
@@ -3108,4 +3108,7 @@
 
 #define PCI_VENDOR_ID_NCUBE		0x10ff
 
+#define PCI_VENDOR_ID_ASIX		0x125b
+#define PCI_DEVICE_ID_AX99100		0x9100

Please read the top of this file for why to not add new ids to it.

thanks,

greg k-h