Add support for parallel port devices Netmos 9900 and Asix 99100
Subsystems (2)
cover Add support for parallel port devices Netmos 9900 and Asix 99100
Support for the established parallel port devices Netmos 9900 and Asix 99100 was lacking. This patch queue adds support for them and was successfullly tested on the two devices.
PATCH 1/2 Add parport support for Netmos device 9900
The Netmos parallel port 9901 was already supported but the device 9900 was not. This patch adds the required settings for it and was successfully tested with the Netmos device 9900.
--- drivers/parport/parport_pc.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/parport/parport_pc.c +4 -0
@@ -2604,6 +2604,7 @@ enum parport_pc_pci_cards { oxsemi_pcie_pport, aks_0100, mobility_pp, + netmos_9900, netmos_9705, netmos_9715, netmos_9755,
@@ -2665,6 +2666,7 @@ static struct parport_pc_pci { /* oxsemi_pcie_pport */ { 1, { { 0, 1 }, } }, /* aks_0100 */ { 1, { { 0, -1 }, } }, /* mobility_pp */ { 1, { { 0, 1 }, } }, + /* netmos_9900 */ { 1, { { 0, -1 }, } }, /* The netmos entries below are untested */ /* netmos_9705 */ { 1, { { 0, -1 }, } },
@@ -2746,6 +2748,8 @@ static const struct pci_device_id parpor PCI_ANY_ID, PCI_ANY_ID, 0, 0, aks_0100 }, { 0x14f2, 0x0121, PCI_ANY_ID, PCI_ANY_ID, 0, 0, mobility_pp },/* NetMos communication controllers */ + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900, + 0xA000, 0x2000, 0, 0, netmos_9900 }, { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9705, PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9705 }, { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9715,
PATCH 2/2 Add parport support for Asix device 99100
In reply to Alexander BaehrFor some reason, Asix decided to produce a parallel port that is fully compatible with Netmos device 9900, but named it 99100. It obviously has another vendor ID, but the device ID is the same. This patch adds the required settings and was successfully tested with the Asix device.
--- drivers/parport/parport_pc.c | 4 ++++ include/linux/pci_ids.h | 3 +++ 2 files changed, 7 insertions(+)
drivers/parport/parport_pc.c +4 -0
@@ -2612,6 +2612,7 @@ enum parport_pc_pci_cards { netmos_9815, netmos_9901, netmos_9865, + asix_ax99100, quatech_sppxp100, wch_ch382l, };
@@ -2766,6 +2767,9 @@ static const struct pci_device_id parpor 0xA000, 0x1000, 0, 0, netmos_9865 }, {PCI_VENDOR_ID_NETMOS ,PCI_DEVICE_ID_NETMOS_9865 , 0xA000, 0x2000, 0, 0, netmos_9865 }, +/* Asix AX99100 Parallel port PCIExpressCard */ + { PCI_VENDOR_ID_ASIX, PCI_DEVICE_ID_AX99100, + 0xA000, 0x2000, 0, 0, netmos_9900 },/* Quatech SPPXP-100 Parallel port PCI ExpressCard */ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SPPXP_100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, quatech_sppxp100 },
include/linux/pci_ids.h +3 -0
@@ -3108,4 +3108,7 @@#define PCI_VENDOR_ID_NCUBE 0x10ff +#define PCI_VENDOR_ID_ASIX 0x125b +#define PCI_DEVICE_ID_AX99100 0x9100 +#endif /* _LINUX_PCI_IDS_H */
Re: [PATCH 2/2] Add parport support for Asix device 99100
Quoted 38 lines · Alexander Baehr
For some reason, Asix decided to produce a parallel port that is fully compatible with Netmos device 9900, but named it 99100. It obviously has another vendor ID, but the device ID is the same. This patch adds the required settings and was successfully tested with the Asix device.
Signed-off-by Alexander Baehr <[email protected]>--- drivers/parport/parport_pc.c | 4 ++++ include/linux/pci_ids.h | 3 +++ 2 files changed, 7 insertions(+)Index:
linux/drivers/parport/parport_pc.c
===================================================================drivers/parport/parport_pc.c +4
-0@@ -2612,6 +2612,7 @@ enum parport_pc_pci_cards { netmos_9815, netmos_9901, netmos_9865, + asix_ax99100, quatech_sppxp100, wch_ch382l, };@@ -2766,6 +2767,9 @@ static const struct pci_device_id parpor 0xA000, 0x1000, 0, 0, netmos_9865 }, {PCI_VENDOR_ID_NETMOS ,PCI_DEVICE_ID_NETMOS_9865 , 0xA000, 0x2000, 0, 0, netmos_9865 }, +/* Asix AX99100 Parallel port PCIExpressCard */ + { PCI_VENDOR_ID_ASIX, PCI_DEVICE_ID_AX99100, + 0xA000, 0x2000, 0, 0, netmos_9900 },/* Quatech SPPXP-100 Parallel port PCI ExpressCard */ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SPPXP_100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, quatech_sppxp100 },Index:
linux/include/linux/pci_ids.h
===================================================================
include/linux/pci_ids.h line 3112
Quoted 5 lines
include/linux/pci_ids.h +2
-0@@ -3108,4 +3108,7 @@#define PCI_VENDOR_ID_NCUBE 0x10ff +#define PCI_VENDOR_ID_ASIX 0x125b +#define PCI_DEVICE_ID_AX99100 0x9100
Please read the top of this file for why we shouldn't be added new entries to it.
thanks,
greg k-h
Re: [PATCH 2/2] Add parport support for Asix device 99100
In reply to Alexander BaehrQuoted 38 lines · Alexander Baehr
For some reason, Asix decided to produce a parallel port that is fully compatible with Netmos device 9900, but named it 99100. It obviously has another vendor ID, but the device ID is the same. This patch adds the required settings and was successfully tested with the Asix device.
Signed-off-by Alexander Baehr <[email protected]>--- drivers/parport/parport_pc.c | 4 ++++ include/linux/pci_ids.h | 3 +++ 2 files changed, 7 insertions(+)Index:
linux/drivers/parport/parport_pc.c
===================================================================drivers/parport/parport_pc.c +4
-0@@ -2612,6 +2612,7 @@ enum parport_pc_pci_cards { netmos_9815, netmos_9901, netmos_9865, + asix_ax99100, quatech_sppxp100, wch_ch382l, };@@ -2766,6 +2767,9 @@ static const struct pci_device_id parpor 0xA000, 0x1000, 0, 0, netmos_9865 }, {PCI_VENDOR_ID_NETMOS ,PCI_DEVICE_ID_NETMOS_9865 , 0xA000, 0x2000, 0, 0, netmos_9865 }, +/* Asix AX99100 Parallel port PCIExpressCard */ + { PCI_VENDOR_ID_ASIX, PCI_DEVICE_ID_AX99100, + 0xA000, 0x2000, 0, 0, netmos_9900 },/* Quatech SPPXP-100 Parallel port PCI ExpressCard */ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SPPXP_100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, quatech_sppxp100 },Index:
linux/include/linux/pci_ids.h
===================================================================
include/linux/pci_ids.h line 3112
Quoted 5 lines
include/linux/pci_ids.h +2
-0@@ -3108,4 +3108,7 @@#define PCI_VENDOR_ID_NCUBE 0x10ff +#define PCI_VENDOR_ID_ASIX 0x125b +#define PCI_DEVICE_ID_AX99100 0x9100
Please read the top of this file for why to not add new ids to it.
thanks,
greg k-h