Skip to contentSkip to conversation

r8169: add support for rtl8168h(revid 0x2a) + rtl8211fs fiber application

PATCH Superseded Chunhao Lin 2 participants 2 messages Aug 8, 2022

Subsystems (3)

v2 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 r8169: add support for rtl8168h(revid 0x2a) + rtl8211fs fiber application

rtl8168h(revid 0x2a) + rtl8211fs is for fiber related application. rtl8168h is connected to rtl8211fs mdio bus via its eeprom or gpio pins. In this patch, use bitbanged MDIO framework to access rtl8211fs.

---
 drivers/net/ethernet/realtek/Kconfig      |   1 +
 drivers/net/ethernet/realtek/r8169_main.c | 289 +++++++++++++++++++++-
 2 files changed, 288 insertions(+), 2 deletions(-)
drivers/net/ethernet/realtek/Kconfig +1 -0
index 93d9df55b361..20367114ac72 100644
@@ -100,6 +100,7 @@ config R8169
 	depends on PCI
 	select FW_LOADER
 	select CRC32
+	select MDIO_BITBANG
 	select PHYLIB
 	select REALTEK_PHY
 	help
drivers/net/ethernet/realtek/r8169_main.c +287 -2

350 lines not on this page · raw message

Signature · 1 line
2.25.1
maintainer
#1 lore raw
Quoted 5 lines · On Tue, 9 Aug 2022 00:39:29 +0800 Chunhao Lin wrote:

rtl8168h(revid 0x2a) + rtl8211fs is for fiber related application. rtl8168h is connected to rtl8211fs mdio bus via its eeprom or gpio pins. In this patch, use bitbanged MDIO framework to access rtl8211fs.

You must CC the maintainers of the driver you're making changes to. Also:

# Form letter - net-next is closed

We have already sent the networking pull request for 6.0 and therefore net-next is closed for new drivers, features, code refactoring and optimizations. We are currently accepting bug fixes only.

Please repost when net-next reopens after 6.0-rc1 is cut.

RFC patches sent for review only are obviously welcome at any time.