r8169: add support for rtl8168h(revid 0x2a) + rtl8211fs fiber application
PATCH v2 1/1 r8169: add support for rtl8168h(revid 0x2a) + rtl8211fs fiber application
rtl8168h(revid 0x2a) + rtl8211fs is for fiber related application. rtl8168h is connected to rtl8211fs mdio bus via its eeprom or gpio pins. In this patch, use bitbanged MDIO framework to access rtl8211fs.
--- drivers/net/ethernet/realtek/Kconfig | 1 + drivers/net/ethernet/realtek/r8169_main.c | 289 +++++++++++++++++++++- 2 files changed, 288 insertions(+), 2 deletions(-)
drivers/net/ethernet/realtek/Kconfig +1 -0
@@ -100,6 +100,7 @@ config R8169 depends on PCI select FW_LOADER select CRC32 + select MDIO_BITBANG select PHYLIB select REALTEK_PHY help
drivers/net/ethernet/realtek/r8169_main.c +287 -2
350 lines not on this page · raw message
Signature · 1 line
2.25.1
Jakub Kicinski
maintainerQuoted 5 lines · On Tue, 9 Aug 2022 00:39:29 +0800 Chunhao Lin wrote:
rtl8168h(revid
0x2a) + rtl8211fs is for fiber related application. rtl8168h is connected to rtl8211fs mdio bus via its eeprom or gpio pins. In this patch, use bitbanged MDIO framework to access rtl8211fs.Signed-off-by Chunhao Lin <[email protected]>
You must CC the maintainers of the driver you're making changes to. Also:
# Form letter - net-next is closed
We have already sent the networking pull request for 6.0 and therefore net-next is closed for new drivers, features, code refactoring and optimizations. We are currently accepting bug fixes only.
Please repost when net-next reopens after 6.0-rc1 is cut.
RFC patches sent for review only are obviously welcome at any time.