Skip to contentSkip to conversation

Support restricting address family of DNS resolved Endpoint

PATCH Superseded Daniel Gröber 1 participant 1 message Aug 23, 2022

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 Support restricting address family of DNS resolved Endpoint

When using wireguard tunnels for providing IPv6 connectivity to machines it can be important to pin which IP address family should be used.

Consider a peer using a DNS name with both A/AAAA records, wg will currently blindly follow system policy and use the first address returned by getaddrinfo(). In typical deployments this will cause the IPv6 address of the peer to be used, however when the whole IPv6 internet is being routed over our wireguard all this accomplishes is a traffic black hole.

Naturally this can be worked around by having different DNS names for v4-only / dual-stack addresses, however this may not be possible in some situations where, say, a dynamic-DNS service is also in use.

To fix this we allow users to control which address family they want using the new AddressFamily= config option, see wg.8 for details. We also update reresolve-dns to take the AddressFamily option into account.

We would like to note that the not_oif patch[1] would also alleviate this problem but since this never got merged it's not a workable solution.

[1]: http://marc.info/?t=145452167200014&r=1&w=2

---
 contrib/reresolve-dns/reresolve-dns.sh |  4 ++-
 src/config.c                           | 41 ++++++++++++++++++++------
 src/config.h                           |  2 +-
 src/containers.h                       |  5 ++++
 src/man/wg.8                           |  8 ++++-
 src/set.c                              |  9 +++++-
 src/setconf.c                          |  2 +-
 7 files changed, 57 insertions(+), 14 deletions(-)

--
Changes in v2: Reword commit message

contrib/reresolve-dns/reresolve-dns.sh +3 -1
index 711c332..bdb47ac 100755
@@ -17,7 +17,7 @@ process_peer() {
 	[[ $PEER_SECTION -ne 1 || -z $PUBLIC_KEY || -z $ENDPOINT ]] && return 0
 	[[ $(wg show "$INTERFACE" latest-handshakes) =~ ${PUBLIC_KEY//+/\\+}\	([0-9]+) ]] || return 0
 	(( ($EPOCHSECONDS - ${BASH_REMATCH[1]}) > 135 )) || return 0
-	wg set "$INTERFACE" peer "$PUBLIC_KEY" endpoint "$ENDPOINT"
+	wg set "$INTERFACE" peer "$PUBLIC_KEY" endpoint "$ENDPOINT" address-family "$FAMILY"
 	reset_peer_section
 }
 
@@ -25,6 +25,7 @@ reset_peer_section() {
 	PEER_SECTION=0
 	PUBLIC_KEY=""
 	ENDPOINT=""
+	FAMILY=unspec
 }
 
 reset_peer_section
@@ -38,6 +39,7 @@ while read -r line || [[ -n $line ]]; do
 		case "$key" in
 		PublicKey) PUBLIC_KEY="$value"; continue ;;
 		Endpoint) ENDPOINT="$value"; continue ;;
+		AddressFamily) FAMILY="$value"; continue ;;
 		esac
 	fi
 done < "$CONFIG_FILE"
src/config.c +32 -9

86 lines not on this page · raw message

src/config.h +1 -1
index 443cf21..6f81da2 100644
@@ -22,6 +22,6 @@ struct config_ctx {
 struct wgdevice *config_read_cmd(const char *argv[], int argc);
 bool config_read_init(struct config_ctx *ctx, bool append);
 bool config_read_line(struct config_ctx *ctx, const char *line);
-struct wgdevice *config_read_finish(struct config_ctx *ctx);
+struct wgdevice *config_read_finish(struct wgdevice *device);
 
 #endif
src/containers.h +5 -0
index a82e8dd..c111621 100644
@@ -52,12 +52,15 @@ struct wgpeer {
 	uint8_t public_key[WG_KEY_LEN];
 	uint8_t preshared_key[WG_KEY_LEN];
 
+	char *endpoint_value;
 	union {
 		struct sockaddr addr;
 		struct sockaddr_in addr4;
 		struct sockaddr_in6 addr6;
 	} endpoint;
 
+	int addr_fam;
+
 	struct timespec64 last_handshake_time;
 	uint64_t rx_bytes, tx_bytes;
 	uint16_t persistent_keepalive_interval;
@@ -99,6 +102,8 @@ static inline void free_wgdevice(struct wgdevice *dev)
 	for (struct wgpeer *peer = dev->first_peer, *np = peer ? peer->next_peer : NULL; peer; peer = np, np = peer ? peer->next_peer : NULL) {
 		for (struct wgallowedip *allowedip = peer->first_allowedip, *na = allowedip ? allowedip->next_allowedip : NULL; allowedip; allowedip = na, na = allowedip ? allowedip->next_allowedip : NULL)
 			free(allowedip);
+		if (peer->endpoint_value)
+			free(peer->endpoint_value);
 		free(peer);
 	}
 	free(dev);
src/man/wg.8 +7 -1
index 7984539..fd9fde7 100644
@@ -55,7 +55,7 @@ transfer-rx, transfer-tx, persistent-keepalive.
 Shows the current configuration of \fI<interface>\fP in the format described
 by \fICONFIGURATION FILE FORMAT\fP below.
 .TP
-\fBset\fP \fI<interface>\fP [\fIlisten-port\fP \fI<port>\fP] [\fIfwmark\fP \fI<fwmark>\fP] [\fIprivate-key\fP \fI<file-path>\fP] [\fIpeer\fP \fI<base64-public-key>\fP [\fIremove\fP] [\fIpreshared-key\fP \fI<file-path>\fP] [\fIendpoint\fP \fI<ip>:<port>\fP] [\fIpersistent-keepalive\fP \fI<interval seconds>\fP] [\fIallowed-ips\fP \fI<ip1>/<cidr1>\fP[,\fI<ip2>/<cidr2>\fP]...] ]...
+\fBset\fP \fI<interface>\fP [\fIlisten-port\fP \fI<port>\fP] [\fIfwmark\fP \fI<fwmark>\fP] [\fIprivate-key\fP \fI<file-path>\fP] [\fIpeer\fP \fI<base64-public-key>\fP [\fIremove\fP] [\fIpreshared-key\fP \fI<file-path>\fP] [\fIendpoint\fP \fI<ip>:<port>\fP] [\fIaddress-family\fP \fI<family>\fP] [\fIpersistent-keepalive\fP \fI<interval seconds>\fP] [\fIallowed-ips\fP \fI<ip1>/<cidr1>\fP[,\fI<ip2>/<cidr2>\fP]...] ]...
 Sets configuration values for the specified \fI<interface>\fP. Multiple
 \fIpeer\fPs may be specified, and if the \fIremove\fP argument is given
 for a peer, that peer is removed, not configured. If \fIlisten-port\fP
@@ -163,6 +163,12 @@ port number. This endpoint will be updated automatically to the most recent
 source IP address and port of correctly authenticated packets from the peer.
 Optional.
 .IP \(bu
+AddressFamily \(em one of \fIinet\fP, \fIinet6\fP or \fIunspec\fP. When a
+hostname is given for \fIEndpoint\fP, setting this to \fIinet\fP or
+\fIinet6\fP will allow only addresses of the given family to be
+used. Defaults to \fIunspec\fP, which causes the first returned address of
+any type to be used.
+.IP \(bu
 PersistentKeepalive \(em a seconds interval, between 1 and 65535 inclusive, of
 how often to send an authenticated empty packet to the peer for the purpose of keeping a
 stateful firewall or NAT mapping valid persistently. For example, if the interface
src/set.c +8 -1
index 75560fd..20ee85e 100644
@@ -18,13 +18,20 @@ int set_main(int argc, const char *argv[])
 	int ret = 1;
 
 	if (argc < 3) {
-		fprintf(stderr, "Usage: %s %s <interface> [listen-port <port>] [fwmark <mark>] [private-key <file path>] [peer <base64 public key> [remove] [preshared-key <file path>] [endpoint <ip>:<port>] [persistent-keepalive <interval seconds>] [allowed-ips <ip1>/<cidr1>[,<ip2>/<cidr2>]...] ]...\n", PROG_NAME, argv[0]);
+		fprintf(stderr, "Usage: %s %s <interface> [listen-port <port>] [fwmark <mark>] [private-key <file path>] [peer <base64 public key> [remove] [preshared-key <file path>] [endpoint <ip>:<port>] [address-family <family>] [persistent-keepalive <interval seconds>] [allowed-ips <ip1>/<cidr1>[,<ip2>/<cidr2>]...] ]...\n", PROG_NAME, argv[0]);
 		return 1;
 	}
 
 	device = config_read_cmd(argv + 2, argc - 2);
 	if (!device)
 		goto cleanup;
+
+	device = config_read_finish(device);
+	if (!device) {
+		fprintf(stderr, "Invalid configuration\n");
+		goto cleanup;
+	}
+
 	strncpy(device->name, argv[1], IFNAMSIZ -  1);
 	device->name[IFNAMSIZ - 1] = '\0';
 
src/setconf.c +1 -1
index 1c5b138..c90fd30 100644
@@ -127,7 +127,7 @@ int setconf_main(int argc, const char *argv[])
 			goto cleanup;
 		}
 	}
-	device = config_read_finish(&ctx);
+	device = config_read_finish(ctx.device);
 	if (!device) {
 		fprintf(stderr, "Invalid configuration\n");
 		goto cleanup;
Signature · 1 line
2.30.2