Support restricting address family of DNS resolved Endpoint
PATCH RESEND v3 1/1 Support restricting address family of DNS resolved Endpoint
When using wireguard tunnels for providing IPv6 connectivity to machines it can be important to pin which IP address family should be used.
Consider a peer using a DNS name with both A/AAAA records, wg will currently blindly follow system policy and use the first address returned by getaddrinfo(). In typical deployments this will cause the IPv6 address of the peer to be used, however when the whole IPv6 internet is being routed over our wg iface all this accomplishes is a traffic black hole.
Naturally this can be worked around by having different DNS names for v4-only / dual-stack addresses, however this may not be possible in some situations where, say, a dynamic-DNS service is also in use.
To fix this we allow users to control which address family they want using the new AddressFamily= config option, see wg.8 for details. We also update reresolve-dns to take the AddressFamily option into account.
We would like to note that the not_oif patch[1] would also alleviate this problem but since this never got merged it's not a workable solution.
[1]: http://marc.info/?t=145452167200014&r=1&w=2
--- contrib/reresolve-dns/reresolve-dns.sh | 4 ++- src/config.c | 41 ++++++++++++++++++++------ src/config.h | 2 +- src/containers.h | 5 ++++ src/man/wg.8 | 8 ++++- src/set.c | 9 +++++- src/setconf.c | 2 +- 7 files changed, 57 insertions(+), 14 deletions(-)
contrib/reresolve-dns/reresolve-dns.sh +3 -1
@@ -17,7 +17,7 @@ process_peer() { [[ $PEER_SECTION -ne 1 || -z $PUBLIC_KEY || -z $ENDPOINT ]] && return 0 [[ $(wg show "$INTERFACE" latest-handshakes) =~ ${PUBLIC_KEY//+/\\+}\ ([0-9]+) ]] || return 0 (( ($EPOCHSECONDS - ${BASH_REMATCH[1]}) > 135 )) || return 0 - wg set "$INTERFACE" peer "$PUBLIC_KEY" endpoint "$ENDPOINT" + wg set "$INTERFACE" peer "$PUBLIC_KEY" endpoint "$ENDPOINT" address-family "$FAMILY" reset_peer_section }
@@ -25,6 +25,7 @@ reset_peer_section() { PEER_SECTION=0 PUBLIC_KEY="" ENDPOINT="" + FAMILY=unspec } reset_peer_section
@@ -38,6 +39,7 @@ while read -r line || [[ -n $line ]]; do case "$key" in PublicKey) PUBLIC_KEY="$value"; continue ;; Endpoint) ENDPOINT="$value"; continue ;; + AddressFamily) FAMILY="$value"; continue ;; esac fi done < "$CONFIG_FILE"
src/config.c +32 -9
86 lines not on this page · raw message
src/config.h +1 -1
@@ -22,6 +22,6 @@ struct config_ctx {struct wgdevice *config_read_cmd (const char *argv[],int argc);bool config_read_init (struct config_ctx *ctx,bool append);bool config_read_line (struct config_ctx *ctx,const char *line); -struct wgdevice *config_read_finish (struct config_ctx *ctx); +struct wgdevice *config_read_finish (struct wgdevice *device);#endif
src/containers.h +5 -0
@@ -52,12 +52,15 @@ struct wgpeer {uint8_t public_key[WG_KEY_LEN ];uint8_t preshared_key[WG_KEY_LEN ]; +char *endpoint_value;union {struct sockaddr addr;struct sockaddr_in addr4;struct sockaddr_in6 addr6; } endpoint; +int addr_fam; +struct timespec64 last_handshake_time;uint64_t rx_bytes, tx_bytes;uint16_t persistent_keepalive_interval;
@@ -99,6 +102,8 @@ static inline void free_wgdevice(struct wgdevice *dev)for (struct wgpeer *peer = dev->first_peer, *np = peer ? peer->next_peer :NULL ; peer; peer = np, np = peer ? peer->next_peer :NULL ) {for (struct wgallowedip *allowedip = peer->first_allowedip, *na = allowedip ? allowedip->next_allowedip :NULL ; allowedip; allowedip = na, na = allowedip ? allowedip->next_allowedip :NULL )free (allowedip); +if (peer->endpoint_value) +free (peer->endpoint_value);free (peer); }free (dev);
src/man/wg.8 +7 -1
@@ -55,7 +55,7 @@ transfer-rx, transfer-tx, persistent-keepalive. Shows the current configuration of \fI<interface>\fP in the format described by \fICONFIGURATION FILE FORMAT\fP below. .TP -\fBset\fP \fI<interface>\fP [\fIlisten-port\fP \fI<port>\fP] [\fIfwmark\fP \fI<fwmark>\fP] [\fIprivate-key\fP \fI<file-path>\fP] [\fIpeer\fP \fI<base64-public-key>\fP [\fIremove\fP] [\fIpreshared-key\fP \fI<file-path>\fP] [\fIendpoint\fP \fI<ip>:<port>\fP] [\fIpersistent-keepalive\fP \fI<interval seconds>\fP] [\fIallowed-ips\fP \fI<ip1>/<cidr1>\fP[,\fI<ip2>/<cidr2>\fP]...] ]... +\fBset\fP \fI<interface>\fP [\fIlisten-port\fP \fI<port>\fP] [\fIfwmark\fP \fI<fwmark>\fP] [\fIprivate-key\fP \fI<file-path>\fP] [\fIpeer\fP \fI<base64-public-key>\fP [\fIremove\fP] [\fIpreshared-key\fP \fI<file-path>\fP] [\fIendpoint\fP \fI<ip>:<port>\fP] [\fIaddress-family\fP \fI<family>\fP] [\fIpersistent-keepalive\fP \fI<interval seconds>\fP] [\fIallowed-ips\fP \fI<ip1>/<cidr1>\fP[,\fI<ip2>/<cidr2>\fP]...] ]... Sets configuration values for the specified \fI<interface>\fP. Multiple \fIpeer\fPs may be specified, and if the \fIremove\fP argument is given for a peer, that peer is removed, not configured. If \fIlisten-port\fP
@@ -163,6 +163,12 @@ port number. This endpoint will be updated automatically to the most recent source IP address and port of correctly authenticated packets from the peer. Optional. .IP \(bu +AddressFamily \(em one of \fIinet\fP, \fIinet6\fP or \fIunspec\fP. When a +hostname is given for \fIEndpoint\fP, setting this to \fIinet\fP or +\fIinet6\fP will allow only addresses of the given family to be +used. Defaults to \fIunspec\fP, which causes the first returned address of +any type to be used. +.IP \(bu PersistentKeepalive \(em a seconds interval, between 1 and 65535 inclusive, of how often to send an authenticated empty packet to the peer for the purpose of keeping a stateful firewall or NAT mapping valid persistently. For example, if the interface
src/set.c +8 -1
@@ -18,13 +18,20 @@ int set_main(int argc, const char *argv[])int ret =1 ;if (argc <3 ) { -fprintf (stderr,"Usage: %s %s <interface> [listen-port <port>] [fwmark <mark>] [private-key <file path>] [peer <base64 public key> [remove] [preshared-key <file path>] [endpoint <ip>:<port>] [persistent-keepalive <interval seconds>] [allowed-ips <ip1>/<cidr1>[,<ip2>/<cidr2>]...] ]...\n" ,PROG_NAME , argv[0 ]); +fprintf (stderr,"Usage: %s %s <interface> [listen-port <port>] [fwmark <mark>] [private-key <file path>] [peer <base64 public key> [remove] [preshared-key <file path>] [endpoint <ip>:<port>] [address-family <family>] [persistent-keepalive <interval seconds>] [allowed-ips <ip1>/<cidr1>[,<ip2>/<cidr2>]...] ]...\n" ,PROG_NAME , argv[0 ]);return 1 ; } device =config_read_cmd (argv +2 , argc -2 );if (!device) goto cleanup; + + device =config_read_finish (device); +if (!device) { +fprintf (stderr,"Invalid configuration\n" ); + goto cleanup; + } +strncpy (device->name, argv[1 ],IFNAMSIZ -1 ); device->name[IFNAMSIZ -1 ] ='\0' ;
src/setconf.c +1 -1
@@ -127,7 +127,7 @@ int setconf_main(int argc, const char *argv[]) goto cleanup; } } - device =config_read_finish (&ctx); + device =config_read_finish (ctx.device);if (!device) {fprintf (stderr,"Invalid configuration\n" ); goto cleanup;
Signature · 1 line
2.30.2
src/config.c static inline bool parse_endpoint(struct sockaddr *endpoint, const char *value) · line 287
Quoted 6 lines · On Sun, 19 Feb 2023 19:04:28 +0100 Daniel Gröber <[email protected]> wrote:
src/config.c +6
-0+static inline bool parse_address_family (int *family,const char *value) +{ +if (strcmp (value,"inet" ) ==0 ) + *family =AF_INET ; +else if (strcmp (value,"inet6" ) ==0 ) + *family =AF_INET6 ;
Wouldn't the first condition match "inet6" as well, not ever checking the second condition?
Quoted 7 lines
src/config.c +7
-0+else if (strcmp (value,"unspec" ) ==0 ) + *family =AF_UNSPEC ; +else +return false; + +return true; +}
Signature · 2 lines
With respect, Roman
19.02.2023 21:31, Roman Mamedov пишет:
Quoted 12 lines
src/config.c static inline bool parse_endpoint(struct sockaddr *endpoint, const char *value) · line 287
Quoted 6 lines · On Sun, 19 Feb 2023 19:04:28 +0100 Daniel Gröber <[email protected]> wrote:
src/config.c +6
-0+static inline bool parse_address_family (int *family,const char *value) +{ +if (strcmp (value,"inet" ) ==0 ) + *family =AF_INET ; +else if (strcmp (value,"inet6" ) ==0 ) + *family =AF_INET6 ;Wouldn't the first condition match "inet6" as well, not ever checking the second condition?
No. It is not memcmp.
/mjt