dt-bindings: display: simple: Add EDT ETML1010G0DKA panel
Subsystems (4)
PATCH 1/2 dt-bindings: display: simple: Add EDT ETML1010G0DKA panel
Add binding for the Emerging Display Technology ETML1010G0DKA panel. It's a 10.1" WXGA (1280 x 800) LVDS panel with backlight and capacitive touch.
--- .../devicetree/bindings/display/panel/panel-simple.yaml | 2 ++ 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/display/panel/panel-simple.yaml +2 -0
@@ -143,6 +143,8 @@ properties: - edt,etm0700g0edh6 # Emerging Display Technology Corp. LVDS WSVGA TFT Display with capacitive touch - edt,etml0700y5dha + # Emerging Display Technology Corp. 10.1" LVDS WXGA TFT Display with capacitive touch + - edt,etml1010g0dka # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel with # capacitive touch - edt,etmv570g2dhu
Signature · 1 line
2.25.1
PATCH 2/2 drm/panel: simple: Add EDT ETML1010G0DKA panel
Add support for the EDT ETML1010G0DKA 10.1" 1280x800 LVDS panel.
--- drivers/gpu/drm/panel/panel-simple.c | 29 ++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+)
drivers/gpu/drm/panel/panel-simple.c +29 -0
@@ -1779,6 +1779,32 @@ static const struct panel_desc edt_etml0700y5dha = { .connector_type = DRM_MODE_CONNECTOR_LVDS, }; +static const struct drm_display_mode edt_etml1010g0dka_mode = { + .clock =70000 , + .hdisplay =1280 , + .hsync_start =1280 +100 , + .hsync_end =1280 +100 +19 , + .htotal =1280 +100 +19 +41 , + .vdisplay =800 , + .vsync_start =800 +4 , + .vsync_end =800 +4 +4 , + .vtotal =800 +4 +4 +15 , + .flags =DRM_MODE_FLAG_PHSYNC |DRM_MODE_FLAG_PVSYNC , +}; + +static const struct panel_desc edt_etml1010g0dka = { + .modes = &edt_etml1010g0dka_mode, + .num_modes =1 , + .bpc =8 , + .size = { + .width =216 , + .height =135 , + }, + .bus_format =MEDIA_BUS_FMT_RGB888_1X7X4_SPWG , + .bus_flags =DRM_BUS_FLAG_DE_HIGH , + .connector_type =DRM_MODE_CONNECTOR_LVDS , +}; +static const struct drm_display_mode edt_etmv570g2dhu_mode = { .clock =25175 , .hdisplay =640 ,
@@ -4057,6 +4083,9 @@ static const struct of_device_id platform_of_match[] = { }, { .compatible = "edt,etml0700y5dha", .data = &edt_etml0700y5dha, + }, { + .compatible = "edt,etml1010g0dka", + .data = &edt_etml1010g0dka, }, { .compatible = "edt,etmv570g2dhu", .data = &edt_etmv570g2dhu,
Signature · 1 line
2.25.1
Re: [PATCH 2/2] drm/panel: simple: Add EDT ETML1010G0DKA panel
Hello,
ping here, this one got forgotten.
It still applies on drm-misc-next and v6.2-rc7
Quoted 54 lines · Dominik Haller
Add support for the EDT ETML1010G0DKA 10.1" 1280x800 LVDS panel.
Signed-off-by Dominik Haller <[email protected]>--- drivers/gpu/drm/panel/panel-simple.c | 29 ++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+)drivers/gpu/drm/panel/panel-simple.c +29
-0@@ -1779,6 +1779,32 @@ static const struct panel_desc edt_etml0700y5dha = { .connector_type = DRM_MODE_CONNECTOR_LVDS, }; +static const struct drm_display_mode edt_etml1010g0dka_mode = { + .clock =70000 , + .hdisplay =1280 , + .hsync_start =1280 +100 , + .hsync_end =1280 +100 +19 , + .htotal =1280 +100 +19 +41 , + .vdisplay =800 , + .vsync_start =800 +4 , + .vsync_end =800 +4 +4 , + .vtotal =800 +4 +4 +15 , + .flags =DRM_MODE_FLAG_PHSYNC |DRM_MODE_FLAG_PVSYNC , +}; + +static const struct panel_desc edt_etml1010g0dka = { + .modes = &edt_etml1010g0dka_mode, + .num_modes =1 , + .bpc =8 , + .size = { + .width =216 , + .height =135 , + }, + .bus_format =MEDIA_BUS_FMT_RGB888_1X7X4_SPWG , + .bus_flags =DRM_BUS_FLAG_DE_HIGH , + .connector_type =DRM_MODE_CONNECTOR_LVDS , +}; +static const struct drm_display_mode edt_etmv570g2dhu_mode = { .clock =25175 , .hdisplay =640 ,@@ -4057,6 +4083,9 @@ static const struct of_device_id platform_of_match[] = { }, { .compatible = "edt,etml0700y5dha", .data = &edt_etml0700y5dha, + }, { + .compatible = "edt,etml1010g0dka", + .data = &edt_etml1010g0dka, }, { .compatible = "edt,etmv570g2dhu", .data = &edt_etmv570g2dhu,
Signature · 5 lines
PHYTEC Messtechnik GmbH | Barcelona-Allee 1 | 55129 Mainz, Germany Geschäftsführer: Dipl.-Ing. Michael Mitezki, Dipl.-Ing. Bodo Huber | Handelsregister Mainz HRB 4656 | Finanzamt Mainz-Mitte | St.Nr. 266500608, DE 149059855
Re: [PATCH 2/2] drm/panel: simple: Add EDT ETML1010G0DKA panel
Quoted 1 line · Dominik Haller
Hello,
Neil Armstrong:
It is quite old. Any reason why not pick this patch?
Frank
Quoted 69 lines
ping here, this one got forgotten.
It still applies on drm-misc-next and v6.2-rc7Quoted 45 lines · Dominik Haller
Add support for the EDT ETML1010G0DKA 10.1" 1280x800 LVDS panel.
Signed-off-by Dominik Haller <[email protected]>--- drivers/gpu/drm/panel/panel-simple.c | 29 ++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+)drivers/gpu/drm/panel/panel-simple.c +26
-0@@ -1779,6 +1779,32 @@ static const struct panel_desc edt_etml0700y5dha = { .connector_type = DRM_MODE_CONNECTOR_LVDS, }; +static const struct drm_display_mode edt_etml1010g0dka_mode = { + .clock =70000 , + .hdisplay =1280 , + .hsync_start =1280 +100 , + .hsync_end =1280 +100 +19 , + .htotal =1280 +100 +19 +41 , + .vdisplay =800 , + .vsync_start =800 +4 , + .vsync_end =800 +4 +4 , + .vtotal =800 +4 +4 +15 , + .flags =DRM_MODE_FLAG_PHSYNC |DRM_MODE_FLAG_PVSYNC , +}; + +static const struct panel_desc edt_etml1010g0dka = { + .modes = &edt_etml1010g0dka_mode, + .num_modes =1 , + .bpc =8 , + .size = { + .width =216 , + .height =135 , + }, + .bus_format =MEDIA_BUS_FMT_RGB888_1X7X4_SPWG , + .bus_flags =DRM_BUS_FLAG_DE_HIGH , + .connector_type =DRM_MODE_CONNECTOR_LVDS , +}; +static const struct drm_display_mode edt_etmv570g2dhu_mode = { .clock =25175 , .hdisplay =640 ,drivers/gpu/drm/panel/panel-simple.c static const struct of_device_id platform_of_match[] = { · line 4091
Quoted 9 lines
drivers/gpu/drm/panel/panel-simple.c +3
-0@@ -4057,6 +4083,9 @@ static const struct of_device_id platform_of_match[] = { }, { .compatible = "edt,etml0700y5dha", .data = &edt_etml0700y5dha, + }, { + .compatible = "edt,etml1010g0dka", + .data = &edt_etml1010g0dka, }, { .compatible = "edt,etmv570g2dhu", .data = &edt_etmv570g2dhu,--
PHYTEC Messtechnik GmbH | Barcelona-Allee 1 | 55129 Mainz, GermanyGeschäftsführer: Dipl.-Ing. Michael Mitezki, Dipl.-Ing. Bodo Huber | Handelsregister Mainz HRB 4656 | Finanzamt Mainz-Mitte | St.Nr. 266500608, DE 149059855
Re: [PATCH 2/2] drm/panel: simple: Add EDT ETML1010G0DKA panel
Quoted 6 lines · Frank Li
Quoted 1 line · Dominik Haller
Hello,
Neil Armstrong:
It is quite old. Any reason why not pick this patch?
Hi,
this panel is eol and we've switched to etml1010g3dra and ph128800t006-zhc01 in our kits.
So this patch can be dropped.
Dominik
Quoted 76 lines
Frank
Quoted 74 lines
ping here, this one got forgotten.
It still applies on drm-misc-next and v6.2-rc7Quoted 57 lines · Dominik Haller
Add support for the EDT ETML1010G0DKA 10.1" 1280x800 LVDS panel.
Signed-off-by Dominik Haller <[email protected]>---
drivers/gpu/drm/panel/panel-simple.c| 29
++++++++++++++++++++++++++++1 file changed, 29 insertions(+)drivers/gpu/drm/panel/panel-simple.c +26
-0@@ -1779,6 +1779,32 @@ static const struct panel_desc edt_etml0700y5dha = { .connector_type = DRM_MODE_CONNECTOR_LVDS, }; +static const struct drm_display_mode edt_etml1010g0dka_mode = { + .clock =70000 , + .hdisplay =1280 , + .hsync_start =1280 +100 , + .hsync_end =1280 +100 +19 , + .htotal =1280 +100 +19 +41 , + .vdisplay =800 , + .vsync_start =800 +4 , + .vsync_end =800 +4 +4 , + .vtotal =800 +4 +4 +15 , + .flags =DRM_MODE_FLAG_PHSYNC |DRM_MODE_FLAG_PVSYNC , +}; + +static const struct panel_desc edt_etml1010g0dka = { + .modes = &edt_etml1010g0dka_mode, + .num_modes =1 , + .bpc =8 , + .size = { + .width =216 , + .height =135 , + }, + .bus_format =MEDIA_BUS_FMT_RGB888_1X7X4_SPWG , + .bus_flags =DRM_BUS_FLAG_DE_HIGH , + .connector_type =DRM_MODE_CONNECTOR_LVDS , +}; + static const struct drm_display_mode edt_etmv570g2dhu_mode = { .clock = 25175,.hdisplay = 640,
drivers/gpu/drm/panel/panel-simple.c +3
-0@@ -4057,6 +4083,9 @@ static const struct of_device_id platform_of_match[] = { }, { .compatible = "edt,etml0700y5dha", .data = &edt_etml0700y5dha, + }, { + .compatible = "edt,etml1010g0dka", + .data = &edt_etml1010g0dka, }, { .compatible = "edt,etmv570g2dhu",Quoted 1 line
.data =
&edt_etmv570g2dhu,--
PHYTEC Messtechnik GmbH | Barcelona-Allee 1 | 55129 Mainz, GermanyGeschäftsführer: Dipl.-Ing. Michael Mitezki, Dipl.-Ing. Bodo Huber |
Handelsregister Mainz HRB 4656 | Finanzamt Mainz-Mitte | St.Nr. 266500608, DE 149059855
Quoted 8 lines · Dominik Haller
Add binding for the Emerging Display Technology ETML1010G0DKA panel. It's a 10.1" WXGA (1280 x 800) LVDS panel with backlight and capacitive touch.
Signed-off-by Dominik Haller <[email protected]>--- .../devicetree/bindings/display/panel/panel-simple.yaml | 2 ++ 1 file changed, 2 insertions(+)