regulator: core: Remove "ramp_delay not set" debug message
PATCH 1/1 regulator: core: Remove "ramp_delay not set" debug message
This message shows up occasionally but in bursts (seen as up 30 times per second on my ODROID N2+).
According to Matthias Kaehlcke's comment in 'regulator: core: silence
warning: "VDD1: ramp_delay not set"', this message should have been removed after restructuring previous code that assumed that ramp_delay being zero in that function was an error.
--- drivers/regulator/core.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
drivers/regulator/core.c +1 -3
@@ -3497,10 +3497,8 @@ static int _regulator_set_voltage_time(struct regulator_dev *rdev, (new_uV < old_uV))return rdev->constraints->settling_time_down; -if (ramp_delay ==0 ) { -rdev_dbg (rdev,"ramp_delay not set\n" ); +if (ramp_delay ==0 )return 0 ; - }return DIV_ROUND_UP (abs (new_uV - old_uV), ramp_delay); }
Signature · 1 line
2.36.2
PATCH v2 1/1 regulator: core: Remove "ramp_delay not set" debug message
This message shows up occasionally but in bursts (seen up to 30 times per second on my ODROID N2+).
According to Matthias Kaehlcke's comment in 'regulator: core: silence
warning: "VDD1: ramp_delay not set"', this message should have been removed after restructuring previous code that assumed that ramp_delay being zero in that function was an error.
--- drivers/regulator/core.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
drivers/regulator/core.c +1 -3
@@ -3497,10 +3497,8 @@ static int _regulator_set_voltage_time(struct regulator_dev *rdev, (new_uV < old_uV))return rdev->constraints->settling_time_down; -if (ramp_delay ==0 ) { -rdev_dbg (rdev,"ramp_delay not set\n" ); +if (ramp_delay ==0 )return 0 ; - }return DIV_ROUND_UP (abs (new_uV - old_uV), ramp_delay); }
Signature · 1 line
2.36.2
Quoted 10 lines · Christian Kohlschütter
This message shows up occasionally but in bursts (seen as up 30 times per second on my ODROID N2+).
According to Matthias Kaehlcke's comment in 'regulator: core: silence
warning: "VDD1:ramp_delaynot set"', this message should have been removed after restructuring previous code that assumed thatramp_delaybeing zero in that function was an error.