Skip to contentSkip to conversation

address deprecated warnings

RFC PATCH In review Mimi Zohar 4 participants 31 messages Aug 30, 2022 – Aug 31, 2022 Keys-trusted

lore
Share & tools
lore

Mimi Zohar

author maintainer
#0 lore raw

cover address deprecated warnings

Between travis/ci and OpenSSL v3 a large number of deprecated warnings are being emitted when compiling ima-evm-utils. Start addressing these deprecated warnings by replacing the low level SHA1 and HMAC calls with the EVP_ functions. IMA signature version 1 also uses low level calls, but instead of fixing it, deprecate it as nobody should be using it anyway.

OpenSSL v3 deprecates "engine" support, causing a lot of warnings. Since turning off engine support affects PKCS11 and Streebog, define a "--enable-engine" configuration option.

In addition address some static analysis warnings and other cleanup.

Mimi Zohar (11):
travis: use the distro OpenSSL version on jammy
travis: update dist=focal
Update configure.ac to address a couple of obsolete warnings Deprecate IMA signature version 1
Replace the low level SHA1 calls when calculating the TPM 1.2 PCRs Replace the low level HMAC calls when calculating the EVM HMAC Add missing EVP_MD_CTX_free() call in calc_evm_hash() Deprecate use of OpenSSL 3 "engine" support
Fix potential use after free in read_tpm_banks()
Limit the file hash algorithm name length
Missing template data size lower bounds checking

 .travis.yml               |   4 +-
 acinclude.m4              |   2 +-
 configure.ac              |  25 ++++-
 m4/manpage-docbook-xsl.m4 |   2 +-
 src/Makefile.am           |  18 ++++
 src/evmctl.c              | 219 ++++++++++++++++++++++++++++----------
 src/imaevm.h              |   2 +
 src/libimaevm.c           |  29 ++++-
 tests/functions.sh        |  11 +-
 tests/ima_hash.test       |   9 ++
 tests/sign_verify.test    |  28 +++--
 11 files changed, 277 insertions(+), 72 deletions(-)
Signature · 1 line
2.31.1
author maintainer
#1 lore raw

RFC PATCH 1/11 travis: use the distro OpenSSL version on jammy

Use the distro OpenSSL version on jammy, which is newer than OpenSSL 3-beta.

---
 .travis.yml | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
.travis.yml +1 -1
index 5741116e418a..b18c871be200 100644
@@ -40,7 +40,7 @@ matrix:
           compiler: gcc
 
         - os: linux
-          env: DISTRO=ubuntu:jammy TSS=ibmtss COMPILE_SSL=openssl-3.0.0-beta1
+          env: DISTRO=ubuntu:jammy TSS=ibmtss
           compiler: gcc
 
         - os: linux
Signature · 1 line
2.31.1
Reviewed-by on v1 1/11
#2 lore raw

Re: [RFC PATCH ima-evm-utils 01/11] travis: use the distro OpenSSL version on jammy

Hi Mimi,

Quoted 2 lines

Use the distro OpenSSL version on jammy, which is newer than OpenSSL 3-beta.

Good catch!

Kind regards,
Petr

author maintainer
#3 lore raw

RFC PATCH 2/11 travis: update dist=focal

In reply to Mimi Zohar

Although Github Actions is GA within Github Enterprise Server 3.x single server edition, it is not available in Github Enterprise Server 3.x cluster edition[1]. Continue to support travis.

[1] https://docs.github.com/en/[email protected]/admin/release-notes#github-packages

---
 .travis.yml | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
.travis.yml +1 -1
index b18c871be200..cc76c0adb312 100644
@@ -1,6 +1,6 @@
 # Copyright (c) 2017-2021 Petr Vorel <[email protected]>
 
-dist: bionic
+dist: focal
 language: C
 services:
     - docker
Signature · 1 line
2.31.1
Reviewed-by on v1 2/11
#4 lore raw

Re: [RFC PATCH ima-evm-utils 02/11] travis: update dist=focal

Hi Mimi,

Quoted 3 lines

Although Github Actions is GA within Github Enterprise Server 3.x single server edition, it is not available in Github Enterprise Server 3.x cluster edition[1]. Continue to support travis.

Working on unpaid version as well.

Kind regards,
Petr

author maintainer
#5 lore raw

RFC PATCH 3/11 Update configure.ac to address a couple of obsolete warnings

In reply to Mimi Zohar

Remove AC_PROG_LIBTOOL and AC_HEAD_STDC. Replace AC_HELP_STRING with AS_HELP_STRING.

---
 acinclude.m4              | 2 +-
 configure.ac              | 4 ----
 m4/manpage-docbook-xsl.m4 | 2 +-
 3 files changed, 2 insertions(+), 6 deletions(-)
acinclude.m4 +1 -1
index dd430d4f0565..bb962f81a9c0 100644
@@ -2,7 +2,7 @@
 AC_DEFUN([PKG_ARG_ENABLE],
 	[
 	AC_MSG_CHECKING(whether to enable $1)
-	AC_ARG_ENABLE([$1], AC_HELP_STRING([--enable-$1], [enable $1 (default is $2)]), 
+	AC_ARG_ENABLE([$1], AS_HELP_STRING([--enable-$1], [enable $1 (default is $2)]),
 	[pkg_cv_enable_$1=$enableval],	
 	[AC_CACHE_VAL([pkg_cv_enable_$1], [pkg_cv_enable_$1=$2])])
 	if test $pkg_cv_enable_$1 = yes; then
configure.ac +0 -4
index 1a0f093df562..9d3b23ff8def 100644
@@ -15,16 +15,12 @@ AM_PROG_CC_C_O
 #AC_PROG_CXX
 #AC_PROG_CPP
 AC_PROG_INSTALL
-AC_PROG_LIBTOOL
 #AC_PROG_LN_S
 LT_INIT
 
 # FIXME: Replace `main' with a function in `-lpthread':
 #AC_CHECK_LIB([pthread], [main])
 
-# Checks for header files.
-AC_HEADER_STDC
-
 PKG_CHECK_MODULES(LIBCRYPTO, [libcrypto >= 0.9.8 ])
 AC_SUBST(KERNEL_HEADERS)
 AC_CHECK_HEADER(unistd.h)
m4/manpage-docbook-xsl.m4 +1 -1
index 25c8ce54b068..f2ee912ed1be 100644
@@ -7,7 +7,7 @@ AC_DEFUN([EVMCTL_MANPAGE_DOCBOOK_XSL], [
 
 	AC_PATH_PROGS(XMLCATALOG, xmlcatalog)
 	AC_ARG_WITH([xml-catalog],
-		AC_HELP_STRING([--with-xml-catalog=CATALOG],
+		AS_HELP_STRING([--with-xml-catalog=CATALOG],
 				[path to xml catalog to use]),,
 				[with_xml_catalog=/etc/xml/catalog])
 	XML_CATALOG_FILE="$with_xml_catalog"
Signature · 1 line
2.31.1
Reviewed-by on v1 3/11
#6 lore raw

Re: [RFC PATCH ima-evm-utils 03/11] Update configure.ac to address a couple of obsolete warnings

Hi Mimi,

Quoted 2 lines

Remove AC_PROG_LIBTOOL and AC_HEAD_STDC. Replace AC_HELP_STRING with AS_HELP_STRING.

+1

Kind regards,
Petr

author maintainer
#7 lore raw

RFC PATCH 4/11 Deprecate IMA signature version 1

In reply to Mimi Zohar

The original IMA file signatures were based on a SHA1 hash. Kernel support for other hash algorithms was subsequently upstreamed. Deprecate "--rsa" support.

Define "--enable-sigv1" option to configure signature v1 support.

---
 configure.ac           |  6 ++++++
 src/Makefile.am        | 10 ++++++++++
 src/evmctl.c           | 16 ++++++++++++----
 src/libimaevm.c        | 24 ++++++++++++++++++++++--
 tests/sign_verify.test | 18 ++++++++++++------
 5 files changed, 62 insertions(+), 12 deletions(-)
configure.ac +6 -0
index 9d3b23ff8def..dc666f2bb1fa 100644
@@ -49,6 +49,11 @@ AC_ARG_ENABLE([openssl_conf],
 		AC_DEFINE(DISABLE_OPENSSL_CONF, 1, [Define to disable loading of openssl config by evmctl.])
 	      fi], [enable_openssl_conf=yes])
 
+AC_ARG_ENABLE(sigv1,
+	      AS_HELP_STRING([--enable-sigv1], [Build ima-evm-utils with signature v1 support]))
+	AM_CONDITIONAL([CONFIG_SIGV1], [test "x$enable_sigv1" = "xyes"])
+	AS_IF([test "$enable_sigv1"  != "yes"], [enable_sigv1="no"])
+
 #debug support - yes for a while
 PKG_ARG_ENABLE(debug, "yes", DEBUG, [Enable Debug support])
 if test $pkg_cv_enable_debug = yes; then
@@ -83,5 +88,6 @@ echo	"   openssl-conf: $enable_openssl_conf"
 echo	"      tss2-esys: $ac_cv_lib_tss2_esys_Esys_Free"
 echo	" tss2-rc-decode: $ac_cv_lib_tss2_rc_Tss2_RC_Decode"
 echo    "         ibmtss: $ac_cv_header_ibmtss_tss_h"
+echo    "         sigv1:  $enable_sigv1"
 echo	"            doc: $have_doc"
 echo
src/Makefile.am +10 -0
index 396496bb439d..90c7249020cf 100644
@@ -7,6 +7,10 @@ libimaevm_la_CPPFLAGS = $(AM_CPPFLAGS) $(LIBCRYPTO_CFLAGS)
 libimaevm_la_LDFLAGS = -version-info 3:0:0
 libimaevm_la_LIBADD =  $(LIBCRYPTO_LIBS)
 
+if CONFIG_SIGV1
+libimaevm_la_CFLAGS = -DCONFIG_SIGV1
+endif
+
 include_HEADERS = imaevm.h
 
 nodist_libimaevm_la_SOURCES = hash_info.h
@@ -22,6 +26,12 @@ evmctl_CPPFLAGS = $(AM_CPPFLAGS) $(LIBCRYPTO_CFLAGS)
 evmctl_LDFLAGS = $(LDFLAGS_READLINE)
 evmctl_LDADD =  $(LIBCRYPTO_LIBS) -lkeyutils libimaevm.la
 
+# Enable IMA signature version 1
+if CONFIG_SIGV1
+evmctl_CFLAGS = -DCONFIG_SIGV1
+endif
+
+
 # USE_PCRTSS uses the Intel TSS
 if USE_PCRTSS
  evmctl_SOURCES += pcr_tss.c
src/evmctl.c +12 -4
index 76e2561798fa..621136b5b85f 100644
@@ -987,7 +987,6 @@ static int cmd_verify_ima(struct command *cmd)
 			init_public_keys("/etc/keys/x509_evm.der");
 	}
 
-	errno = 0;
 	if (!file) {
 		log_err("Parameters missing\n");
 		print_usage(cmd);
@@ -1006,6 +1005,7 @@ static int cmd_verify_ima(struct command *cmd)
 
 static int cmd_convert(struct command *cmd)
 {
+#if CONFIG_SIGV1
 	char *inkey;
 	unsigned char _pub[1024], *pub = _pub;
 	int len, err = 0;
@@ -1033,6 +1033,8 @@ static int cmd_convert(struct command *cmd)
 
 	RSA_free(key);
 	return err;
+#endif
+	return 77;
 }
 
 static int cmd_import(struct command *cmd)
@@ -1088,6 +1090,7 @@ static int cmd_import(struct command *cmd)
 		calc_keyid_v2((uint32_t *)keyid, name, pkey);
 		EVP_PKEY_free(pkey);
 	} else {
+#if CONFIG_SIGV1
 		RSA *key = read_pub_key(inkey, imaevm_params.x509);
 
 		if (!key)
@@ -1095,6 +1098,10 @@ static int cmd_import(struct command *cmd)
 		len = key2bin(key, pub);
 		calc_keyid_v1(keyid, name, pub, len);
 		RSA_free(key);
+#else
+		log_info("Importing public RSA key not supported\n");
+		return 1;
+#endif
 	}
 
 	log_info("Importing public key %s from file %s into keyring %d\n", name, inkey, id);
@@ -2598,7 +2605,8 @@ static void usage(void)
 		"  -d, --imahash      make IMA hash\n"
 		"  -f, --sigfile      store IMA signature in .sig file instead of xattr\n"
 		"      --xattr-user   store xattrs in user namespace (for testing purposes)\n"
-		"      --rsa          use RSA key type and signing scheme v1\n"
+
+		"      --rsa          use RSA key type and signing scheme v1 (deprecated)\n"
 		"  -k, --key          path to signing key (default: /etc/keys/{privkey,pubkey}_evm.pem)\n"
 		"                     or a pkcs11 URI\n"
 		"      --keyid n      overwrite signature keyid with a 32-bit value in hex (for signing)\n"
@@ -2637,8 +2645,8 @@ static void usage(void)
 struct command cmds[] = {
 	{"--version", NULL, 0, ""},
 	{"help", cmd_help, 0, "<command>"},
-	{"import", cmd_import, 0, "[--rsa] pubkey keyring", "Import public key into the keyring.\n"},
-	{"convert", cmd_convert, 0, "key", "convert public key into the keyring.\n"},
+	{"import", cmd_import, 0, "[--rsa] pubkey keyring", "Import public key into the keyring. (deprecated)\n"},
+	{"convert", cmd_convert, 0, "key", "convert public key into the keyring. (deprecated)\n"},
 	{"sign", cmd_sign_evm, 0, "[-r] [--imahash | --imasig ] [--key key] [--pass [password] file", "Sign file metadata.\n"},
 	{"verify", cmd_verify_evm, 0, "file", "Verify EVM signature (for debugging).\n"},
 	{"ima_sign", cmd_sign_ima, 0, "[--sigfile] [--key key] [--pass [password] file", "Make file content signature.\n"},
src/libimaevm.c +22 -2
index e4b62b4989b2..cb815f953a80 100644
@@ -294,8 +294,9 @@ out:
 
 RSA *read_pub_key(const char *keyfile, int x509)
 {
+	RSA *key = NULL;
+#if CONFIG_SIGV1
 	EVP_PKEY *pkey;
-	RSA *key;
 
 	pkey = read_pub_pkey(keyfile, x509);
 	if (!pkey)
@@ -307,9 +308,11 @@ RSA *read_pub_key(const char *keyfile, int x509)
 		output_openssl_errors();
 		return NULL;
 	}
+#endif
 	return key;
 }
 
+#if CONFIG_SIGV1
 static int verify_hash_v1(const char *file, const unsigned char *hash, int size,
 			  unsigned char *sig, int siglen, const char *keyfile)
 {
@@ -351,6 +354,7 @@ static int verify_hash_v1(const char *file, const unsigned char *hash, int size,
 
 	return 0;
 }
+#endif
 
 struct public_key_entry {
 	struct public_key_entry *next;
@@ -686,6 +690,7 @@ int verify_hash(const char *file, const unsigned char *hash, int size,
 {
 	/* Get signature type from sig header */
 	if (sig[1] == DIGSIG_VERSION_1) {
+#if CONFIG_SIGV1
 		const char *key = NULL;
 
 		/* Read pubkey from RSA key */
@@ -695,6 +700,10 @@ int verify_hash(const char *file, const unsigned char *hash, int size,
 			key = imaevm_params.keyfile;
 		return verify_hash_v1(file, hash, size, sig + 1, siglen - 1,
 					 key);
+#else
+		log_info("Signature version 1 deprecated.");
+		return -1;
+#endif
 	} else if (sig[1] == DIGSIG_VERSION_2) {
 		return verify_hash_v2(file, hash, size, sig, siglen);
 	} else if (sig[1] == DIGSIG_VERSION_3) {
@@ -747,6 +756,7 @@ int ima_verify_signature(const char *file, unsigned char *sig, int siglen,
  */
 int key2bin(RSA *key, unsigned char *pub)
 {
+#if CONFIG_SIGV1
 	int len, b, offset = 0;
 	struct pubkey_hdr *pkh = (struct pubkey_hdr *)pub;
 	const BIGNUM *n, *e;
@@ -781,10 +791,14 @@ int key2bin(RSA *key, unsigned char *pub)
 	offset += len;
 
 	return offset;
+#else
+	return 77; /* SKIP */
+#endif
 }
 
 void calc_keyid_v1(uint8_t *keyid, char *str, const unsigned char *pkey, int len)
 {
+#if CONFIG_SIGV1
 	uint8_t sha1[SHA_DIGEST_LENGTH];
 	uint64_t id;
 
@@ -799,6 +813,7 @@ void calc_keyid_v1(uint8_t *keyid, char *str, const unsigned char *pkey, int len
 
 	if (imaevm_params.verbose > LOG_INFO)
 		log_info("keyid-v1: %s\n", str);
+#endif
 }
 
 /*
@@ -990,10 +1005,11 @@ err_engine:
 	return NULL;
 }
 
+#if CONFIG_SIGV1
 static RSA *read_priv_key(const char *keyfile, const char *keypass)
 {
+	RSA *key = NULL;
 	EVP_PKEY *pkey;
-	RSA *key;
 
 	pkey = read_priv_pkey(keyfile, keypass);
 	if (!pkey)
@@ -1018,10 +1034,12 @@ static int get_hash_algo_v1(const char *algo)
 
 	return -1;
 }
+#endif
 
 static int sign_hash_v1(const char *hashalgo, const unsigned char *hash,
 			int size, const char *keyfile, unsigned char *sig)
 {
+#if CONFIG_SIGV1
 	int len = -1, hashalgo_idx;
 	SHA_CTX ctx;
 	unsigned char pub[1024];
@@ -1099,6 +1117,8 @@ static int sign_hash_v1(const char *hashalgo, const unsigned char *hash,
 out:
 	RSA_free(key);
 	return len;
+#endif
+	return 77;  /* SKIP */
 }
 
 /*
tests/sign_verify.test +12 -6
index c56290aa4932..948892759424 100755
@@ -17,6 +17,7 @@
 
 cd "$(dirname "$0")" || exit 1
 PATH=../src:$PATH
+SIGV1=0
 source ./functions.sh
 
 _require cmp evmctl getfattr openssl xxd
@@ -368,13 +369,18 @@ try_different_sigs() {
 
 ## Test v1 signatures
 # Signature v1 only supports sha1 and sha256 so any other should fail
-expect_fail \
-  check_sign TYPE=ima KEY=rsa1024 ALG=md5 PREFIX=0x0301 OPTS=--rsa
+if [ $SIGV1 -eq 0 ]; then
+  __skip() { echo "IMA signature v1 tests are skipped: not supported"; return $SKIP; }
+  expect_pass __skip
+else
+   expect_fail \
+      check_sign TYPE=ima KEY=rsa1024 ALG=md5 PREFIX=0x0301 OPTS=--rsa
 
-sign_verify  rsa1024  sha1    0x0301 --rsa
-sign_verify  rsa1024  sha256  0x0301 --rsa
-  try_different_keys
-  try_different_sigs
+   sign_verify  rsa1024  sha1    0x0301 --rsa
+   sign_verify  rsa1024  sha256  0x0301 --rsa
+      try_different_keys
+      try_different_sigs
+fi
 
 ## Test v2 signatures with RSA PKCS#1
 # List of allowed hashes much greater but not all are supported.
Signature · 1 line
2.31.1
Reviewed-by on v1 4/11
#8 lore raw

Re: [RFC PATCH ima-evm-utils 04/11] Deprecate IMA signature version 1

Quoted 5 lines

The original IMA file signatures were based on a SHA1 hash. Kernel support for other hash algorithms was subsequently upstreamed. Deprecate "--rsa" support.

Define "--enable-sigv1" option to configure signature v1 support.

LGTM, few minor comments below.

Kind regards,
Petr

...

Quoted 1 line

+++ b/configure.ac

...

src/evmctl.c static int cmd_convert(struct command *cmd) · line 1037

Quoted 12 lines

static int cmd_convert(struct command *cmd)
{

src/evmctl.c +3 -0
+#if CONFIG_SIGV1
 	char *inkey;
 	unsigned char _pub[1024], *pub = _pub;
 	int len, err = 0;
@@ -1033,6 +1033,8 @@ static int cmd_convert(struct command *cmd)
 
 	RSA_free(key);
 	return err;
+#endif
+	return 77;

What is this this magic number? EBADFD?
Well, git grep shows many places with 77, so it's just a tip for next cleanup :).

...

src/evmctl.c static void usage(void) · line 2608

Quoted 7 lines
src/evmctl.c +1 -1
 	log_info("Importing public key %s from file %s into keyring %d\n", name, inkey, id);
@@ -2598,7 +2605,8 @@ static void usage(void)
 		"  -d, --imahash      make IMA hash\n"
 		"  -f, --sigfile      store IMA signature in .sig file instead of xattr\n"
 		"      --xattr-user   store xattrs in user namespace (for testing purposes)\n"
-		"      --rsa          use RSA key type and signing scheme v1\n"
+

nit: was this blank line intentional?

Quoted 15 lines
src/evmctl.c +3 -2
+		"      --rsa          use RSA key type and signing scheme v1 (deprecated)\n"
 		"  -k, --key          path to signing key (default: /etc/keys/{privkey,pubkey}_evm.pem)\n"
 		"                     or a pkcs11 URI\n"
 		"      --keyid n      overwrite signature keyid with a 32-bit value in hex (for signing)\n"
@@ -2637,8 +2645,8 @@ static void usage(void)
 struct command cmds[] = {
 	{"--version", NULL, 0, ""},
 	{"help", cmd_help, 0, "<command>"},
-	{"import", cmd_import, 0, "[--rsa] pubkey keyring", "Import public key into the keyring.\n"},
-	{"convert", cmd_convert, 0, "key", "convert public key into the keyring.\n"},
+	{"import", cmd_import, 0, "[--rsa] pubkey keyring", "Import public key into the keyring. (deprecated)\n"},
+	{"convert", cmd_convert, 0, "key", "convert public key into the keyring. (deprecated)\n"},
 	{"sign", cmd_sign_evm, 0, "[-r] [--imahash | --imasig ] [--key key] [--pass [password] file", "Sign file metadata.\n"},
 	{"verify", cmd_verify_evm, 0, "file", "Verify EVM signature (for debugging).\n"},
 	{"ima_sign", cmd_sign_ima, 0, "[--sigfile] [--key key] [--pass [password] file", "Make file content signature.\n"},

...

Quoted 1 line

+++ b/src/libimaevm.c

...

src/libimaevm.c err_engine: · line 1011

Quoted 4 lines
src/libimaevm.c +2 -0
+#if CONFIG_SIGV1
 static RSA *read_priv_key(const char *keyfile, const char *keypass)
 {
+	RSA *key = NULL;

nit: NULL is safe, I wonder if it is necessary (was needed before).

Quoted 10 lines
src/libimaevm.c +1 -1
 	EVP_PKEY *pkey;
-	RSA *key;
 
 	pkey = read_priv_pkey(keyfile, keypass);
 	if (!pkey)
@@ -1018,10 +1034,12 @@ static int get_hash_algo_v1(const char *algo)
 
 	return -1;
 }
+#endif
author maintainer
#9 lore raw

Re: [RFC PATCH ima-evm-utils 04/11] Deprecate IMA signature version 1

Hi Petr,

Quoted 9 lines · Petr Vorel
Quoted 5 lines

The original IMA file signatures were based on a SHA1 hash. Kernel support for other hash algorithms was subsequently upstreamed. Deprecate "--rsa" support.

Define "--enable-sigv1" option to configure signature v1 support.

LGTM, few minor comments below.

Thank you for all the reviews!

Quoted 13 lines

...

Quoted 1 line

+++ b/configure.ac

...

Quoted 7 lines

static int cmd_convert(struct command *cmd)
{

src/evmctl.c +1 -0
+#if CONFIG_SIGV1
 	char *inkey;
 	unsigned char _pub[1024], *pub = _pub;
 	int len, err = 0;
@@ -1033,6 +1033,8 @@ static int cmd_convert(struct command *cmd)
Quoted 6 lines

src/evmctl.c static int cmd_convert(struct command *cmd) · line 1037

Quoted 4 lines
src/evmctl.c +2 -0
 	RSA_free(key);
 	return err;
+#endif
+	return 77;

What is this this magic number? EBADFD?
Well, git grep shows many places with 77, so it's just a tip for next cleanup :).

SKIP is defined as 77 in the tests/ directory. Using 77 in src/*.c is incorrect. v2 ifdefs all of cmd_convert(), so this is going away. I'll remove the other occurance of 77 in the src/ directory.

Quoted 26 lines

...

src/evmctl.c static void usage(void) · line 2608

Quoted 7 lines
src/evmctl.c +1 -1
 	log_info("Importing public key %s from file %s into keyring %d\n", name, inkey, id);
@@ -2598,7 +2605,8 @@ static void usage(void)
 		"  -d, --imahash      make IMA hash\n"
 		"  -f, --sigfile      store IMA signature in .sig file instead of xattr\n"
 		"      --xattr-user   store xattrs in user namespace (for testing purposes)\n"
-		"      --rsa          use RSA key type and signing scheme v1\n"
+

nit: was this blank line intentional?

Quoted 15 lines
src/evmctl.c +3 -2
+		"      --rsa          use RSA key type and signing scheme v1 (deprecated)\n"
 		"  -k, --key          path to signing key (default: /etc/keys/{privkey,pubkey}_evm.pem)\n"
 		"                     or a pkcs11 URI\n"
 		"      --keyid n      overwrite signature keyid with a 32-bit value in hex (for signing)\n"
@@ -2637,8 +2645,8 @@ static void usage(void)
 struct command cmds[] = {
 	{"--version", NULL, 0, ""},
 	{"help", cmd_help, 0, "<command>"},
-	{"import", cmd_import, 0, "[--rsa] pubkey keyring", "Import public key into the keyring.\n"},
-	{"convert", cmd_convert, 0, "key", "convert public key into the keyring.\n"},
+	{"import", cmd_import, 0, "[--rsa] pubkey keyring", "Import public key into the keyring. (deprecated)\n"},
+	{"convert", cmd_convert, 0, "key", "convert public key into the keyring. (deprecated)\n"},
 	{"sign", cmd_sign_evm, 0, "[-r] [--imahash | --imasig ] [--key key] [--pass [password] file", "Sign file metadata.\n"},
 	{"verify", cmd_verify_evm, 0, "file", "Verify EVM signature (for debugging).\n"},
 	{"ima_sign", cmd_sign_ima, 0, "[--sigfile] [--key key] [--pass [password] file", "Make file content signature.\n"},

...

Quoted 8 lines
Quoted 1 line

+++ b/src/libimaevm.c

...

src/libimaevm.c err_engine: · line 1011

Quoted 4 lines
src/libimaevm.c +2 -0
+#if CONFIG_SIGV1
 static RSA *read_priv_key(const char *keyfile, const char *keypass)
 {
+	RSA *key = NULL;

nit: NULL is safe, I wonder if it is necessary (was needed before).

Looking at this again, it isn't needed. On failure to set either pkey or key, NULL is returned.

Quoted 10 lines
Quoted 10 lines
src/libimaevm.c +1 -1
 	EVP_PKEY *pkey;
-	RSA *key;
 
 	pkey = read_priv_pkey(keyfile, keypass);
 	if (!pkey)
@@ -1018,10 +1034,12 @@ static int get_hash_algo_v1(const char *algo)
 
 	return -1;
 }
+#endif
Signature · 3 lines
thanks,

Mimi
#10 lore raw

Re: [RFC PATCH ima-evm-utils 04/11] Deprecate IMA signature version 1

In reply to Mimi Zohar
Quoted 104 lines · Mimi Zohar

The original IMA file signatures were based on a SHA1 hash. Kernel support for other hash algorithms was subsequently upstreamed. Deprecate "--rsa" support.

Define "--enable-sigv1" option to configure signature v1 support.

---
  configure.ac           |  6 ++++++
  src/Makefile.am        | 10 ++++++++++
  src/evmctl.c           | 16 ++++++++++++----
  src/libimaevm.c        | 24 ++++++++++++++++++++++--
  tests/sign_verify.test | 18 ++++++++++++------
  5 files changed, 62 insertions(+), 12 deletions(-)
configure.ac +6 -0
index 9d3b23ff8def..dc666f2bb1fa 100644
@@ -49,6 +49,11 @@ AC_ARG_ENABLE([openssl_conf],
  		AC_DEFINE(DISABLE_OPENSSL_CONF, 1, [Define to disable loading of openssl config by evmctl.])
  	      fi], [enable_openssl_conf=yes])
 
+AC_ARG_ENABLE(sigv1,
+	      AS_HELP_STRING([--enable-sigv1], [Build ima-evm-utils with signature v1 support]))
+	AM_CONDITIONAL([CONFIG_SIGV1], [test "x$enable_sigv1" = "xyes"])
+	AS_IF([test "$enable_sigv1"  != "yes"], [enable_sigv1="no"])
+
  #debug support - yes for a while
  PKG_ARG_ENABLE(debug, "yes", DEBUG, [Enable Debug support])
  if test $pkg_cv_enable_debug = yes; then
@@ -83,5 +88,6 @@ echo	"   openssl-conf: $enable_openssl_conf"
  echo	"      tss2-esys: $ac_cv_lib_tss2_esys_Esys_Free"
  echo	" tss2-rc-decode: $ac_cv_lib_tss2_rc_Tss2_RC_Decode"
  echo    "         ibmtss: $ac_cv_header_ibmtss_tss_h"
+echo    "         sigv1:  $enable_sigv1"
  echo	"            doc: $have_doc"
  echo
src/Makefile.am +10 -0
index 396496bb439d..90c7249020cf 100644
@@ -7,6 +7,10 @@ libimaevm_la_CPPFLAGS = $(AM_CPPFLAGS) $(LIBCRYPTO_CFLAGS)
  libimaevm_la_LDFLAGS = -version-info 3:0:0
  libimaevm_la_LIBADD =  $(LIBCRYPTO_LIBS)
 
+if CONFIG_SIGV1
+libimaevm_la_CFLAGS = -DCONFIG_SIGV1
+endif
+
  include_HEADERS = imaevm.h
 
  nodist_libimaevm_la_SOURCES = hash_info.h
@@ -22,6 +26,12 @@ evmctl_CPPFLAGS = $(AM_CPPFLAGS) $(LIBCRYPTO_CFLAGS)
  evmctl_LDFLAGS = $(LDFLAGS_READLINE)
  evmctl_LDADD =  $(LIBCRYPTO_LIBS) -lkeyutils libimaevm.la
 
+# Enable IMA signature version 1
+if CONFIG_SIGV1
+evmctl_CFLAGS = -DCONFIG_SIGV1
+endif
+
+
  # USE_PCRTSS uses the Intel TSS
  if USE_PCRTSS
   evmctl_SOURCES += pcr_tss.c
src/evmctl.c +4 -1
index 76e2561798fa..621136b5b85f 100644
@@ -987,7 +987,6 @@ static int cmd_verify_ima(struct command *cmd)
  			init_public_keys("/etc/keys/x509_evm.der");
  	}
 
-	errno = 0;
  	if (!file) {
  		log_err("Parameters missing\n");
  		print_usage(cmd);
@@ -1006,6 +1005,7 @@ static int cmd_verify_ima(struct command *cmd)
 
  static int cmd_convert(struct command *cmd)
  {
+#if CONFIG_SIGV1
  	char *inkey;
  	unsigned char _pub[1024], *pub = _pub;
  	int len, err = 0;
@@ -1033,6 +1033,8 @@ static int cmd_convert(struct command *cmd)
 
  	RSA_free(key);
  	return err;
+#endif
+	return 77;
  }
 
  static int cmd_import(struct command *cmd)
@@ -1088,6 +1090,7 @@ static int cmd_import(struct command *cmd)
  		calc_keyid_v2((uint32_t *)keyid, name, pkey);
  		EVP_PKEY_free(pkey);
  	} else {
+#if CONFIG_SIGV1
  		RSA *key = read_pub_key(inkey, imaevm_params.x509);
 
  		if (!key)

src/evmctl.c static int cmd_import(struct command *cmd) · line 1102

Quoted 5 lines
src/evmctl.c +2 -0
@@ -1095,6 +1098,10 @@ static int cmd_import(struct command *cmd)
  		len = key2bin(key, pub);
  		calc_keyid_v1(keyid, name, pub, len);
  		RSA_free(key);
+#else
+		log_info("Importing public RSA key not supported\n");

.. key *is* not supported

Quoted 16 lines
src/evmctl.c +4 -1
+		return 1;
+#endif
  	}
 
  	log_info("Importing public key %s from file %s into keyring %d\n", name, inkey, id);
@@ -2598,7 +2605,8 @@ static void usage(void)
  		"  -d, --imahash      make IMA hash\n"
  		"  -f, --sigfile      store IMA signature in .sig file instead of xattr\n"
  		"      --xattr-user   store xattrs in user namespace (for testing purposes)\n"
-		"      --rsa          use RSA key type and signing scheme v1\n"
+
+		"      --rsa          use RSA key type and signing scheme v1 (deprecated)\n"
  		"  -k, --key          path to signing key (default: /etc/keys/{privkey,pubkey}_evm.pem)\n"
  		"                     or a pkcs11 URI\n"
  		"      --keyid n      overwrite signature keyid with a 32-bit value in hex (for signing)\n"

src/evmctl.c static void usage(void) · line 2649

Quoted 7 lines
src/evmctl.c +2 -2
@@ -2637,8 +2645,8 @@ static void usage(void)
  struct command cmds[] = {
  	{"--version", NULL, 0, ""},
  	{"help", cmd_help, 0, "<command>"},
-	{"import", cmd_import, 0, "[--rsa] pubkey keyring", "Import public key into the keyring.\n"},
-	{"convert", cmd_convert, 0, "key", "convert public key into the keyring.\n"},
+	{"import", cmd_import, 0, "[--rsa] pubkey keyring", "Import public key into the keyring. (deprecated)\n"},
+	{"convert", cmd_convert, 0, "key", "convert public key into the keyring. (deprecated)\n"},

Unless CONFIG_SIGV1 is defined it looks like cmd_convert doesn't do anything anymore except return 77? In this case you could just ifdef this command out.

Quoted 66 lines
src/evmctl.c +0 -0
  	{"sign", cmd_sign_evm, 0, "[-r] [--imahash | --imasig ] [--key key] [--pass [password] file", "Sign file metadata.\n"},
  	{"verify", cmd_verify_evm, 0, "file", "Verify EVM signature (for debugging).\n"},
  	{"ima_sign", cmd_sign_ima, 0, "[--sigfile] [--key key] [--pass [password] file", "Make file content signature.\n"},
src/libimaevm.c +11 -1
index e4b62b4989b2..cb815f953a80 100644
@@ -294,8 +294,9 @@ out:
 
  RSA *read_pub_key(const char *keyfile, int x509)
  {
+	RSA *key = NULL;
+#if CONFIG_SIGV1
  	EVP_PKEY *pkey;
-	RSA *key;
 
  	pkey = read_pub_pkey(keyfile, x509);
  	if (!pkey)
@@ -307,9 +308,11 @@ RSA *read_pub_key(const char *keyfile, int x509)
  		output_openssl_errors();
  		return NULL;
  	}
+#endif
  	return key;
  }
 
+#if CONFIG_SIGV1
  static int verify_hash_v1(const char *file, const unsigned char *hash, int size,
  			  unsigned char *sig, int siglen, const char *keyfile)
  {
@@ -351,6 +354,7 @@ static int verify_hash_v1(const char *file, const unsigned char *hash, int size,
 
  	return 0;
  }
+#endif
 
  struct public_key_entry {
  	struct public_key_entry *next;
@@ -686,6 +690,7 @@ int verify_hash(const char *file, const unsigned char *hash, int size,
  {
  	/* Get signature type from sig header */
  	if (sig[1] == DIGSIG_VERSION_1) {
+#if CONFIG_SIGV1
  		const char *key = NULL;
 
  		/* Read pubkey from RSA key */
@@ -695,6 +700,10 @@ int verify_hash(const char *file, const unsigned char *hash, int size,
  			key = imaevm_params.keyfile;
  		return verify_hash_v1(file, hash, size, sig + 1, siglen - 1,
  					 key);
+#else
+		log_info("Signature version 1 deprecated.");
+		return -1;
+#endif
  	} else if (sig[1] == DIGSIG_VERSION_2) {
  		return verify_hash_v2(file, hash, size, sig, siglen);
  	} else if (sig[1] == DIGSIG_VERSION_3) {
@@ -747,6 +756,7 @@ int ima_verify_signature(const char *file, unsigned char *sig, int siglen,
   */
  int key2bin(RSA *key, unsigned char *pub)
  {
+#if CONFIG_SIGV1
  	int len, b, offset = 0;
  	struct pubkey_hdr *pkh = (struct pubkey_hdr *)pub;
  	const BIGNUM *n, *e;

src/libimaevm.c int key2bin(RSA *key, unsigned char *pub) · line 797

Quoted 7 lines
src/libimaevm.c +3 -0
@@ -781,10 +791,14 @@ int key2bin(RSA *key, unsigned char *pub)
  	offset += len;
 
  	return offset;
+#else
+	return 77; /* SKIP */
+#endif
  }

This function has no callers if CONFIG_SIGV1 is not set and otherwise it's useless also if someone was a user of the library only. I would consider ifdef'ing the whole function...

Quoted 87 lines
src/libimaevm.c +8 -1
  void calc_keyid_v1(uint8_t *keyid, char *str, const unsigned char *pkey, int len)
  {
+#if CONFIG_SIGV1
  	uint8_t sha1[SHA_DIGEST_LENGTH];
  	uint64_t id;
 
@@ -799,6 +813,7 @@ void calc_keyid_v1(uint8_t *keyid, char *str, const unsigned char *pkey, int len
 
  	if (imaevm_params.verbose > LOG_INFO)
  		log_info("keyid-v1: %s\n", str);
+#endif
  }
 
  /*
@@ -990,10 +1005,11 @@ err_engine:
  	return NULL;
  }
 
+#if CONFIG_SIGV1
  static RSA *read_priv_key(const char *keyfile, const char *keypass)
  {
+	RSA *key = NULL;
  	EVP_PKEY *pkey;
-	RSA *key;
 
  	pkey = read_priv_pkey(keyfile, keypass);
  	if (!pkey)
@@ -1018,10 +1034,12 @@ static int get_hash_algo_v1(const char *algo)
 
  	return -1;
  }
+#endif
 
  static int sign_hash_v1(const char *hashalgo, const unsigned char *hash,
  			int size, const char *keyfile, unsigned char *sig)
  {
+#if CONFIG_SIGV1
  	int len = -1, hashalgo_idx;
  	SHA_CTX ctx;
  	unsigned char pub[1024];
@@ -1099,6 +1117,8 @@ static int sign_hash_v1(const char *hashalgo, const unsigned char *hash,
  out:
  	RSA_free(key);
  	return len;
+#endif
+	return 77;  /* SKIP */
  }
 
  /*
tests/sign_verify.test +12 -6
index c56290aa4932..948892759424 100755
@@ -17,6 +17,7 @@
 
  cd "$(dirname "$0")" || exit 1
  PATH=../src:$PATH
+SIGV1=0
  source ./functions.sh
 
  _require cmp evmctl getfattr openssl xxd
@@ -368,13 +369,18 @@ try_different_sigs() {
 
  ## Test v1 signatures
  # Signature v1 only supports sha1 and sha256 so any other should fail
-expect_fail \
-  check_sign TYPE=ima KEY=rsa1024 ALG=md5 PREFIX=0x0301 OPTS=--rsa
+if [ $SIGV1 -eq 0 ]; then
+  __skip() { echo "IMA signature v1 tests are skipped: not supported"; return $SKIP; }
+  expect_pass __skip
+else
+   expect_fail \
+      check_sign TYPE=ima KEY=rsa1024 ALG=md5 PREFIX=0x0301 OPTS=--rsa
 
-sign_verify  rsa1024  sha1    0x0301 --rsa
-sign_verify  rsa1024  sha256  0x0301 --rsa
-  try_different_keys
-  try_different_sigs
+   sign_verify  rsa1024  sha1    0x0301 --rsa
+   sign_verify  rsa1024  sha256  0x0301 --rsa
+      try_different_keys
+      try_different_sigs
+fi
 
  ## Test v2 signatures with RSA PKCS#1
  # List of allowed hashes much greater but not all are supported.
author maintainer
#11 lore raw

Re: [RFC PATCH ima-evm-utils 04/11] Deprecate IMA signature version 1

Quoted 11 lines · Stefan Berger
Quoted 11 lines
src/libimaevm.c +1 -0
@@ -747,6 +756,7 @@ int ima_verify_signature(const char *file, unsigned char *sig, int siglen,
   */
  int key2bin(RSA *key, unsigned char *pub)
  {
+#if CONFIG_SIGV1
      int len, b, offset = 0;
      struct pubkey_hdr *pkh = (struct pubkey_hdr *)pub;
      const BIGNUM *n, *e;
@@ -781,10 +791,14 @@ int key2bin(RSA *key, unsigned char *pub)
      offset += len;
 
Quoted 9 lines

src/libimaevm.c int key2bin(RSA *key, unsigned char *pub) · line 797

Quoted 5 lines
src/libimaevm.c +3 -0
      return offset;
+#else
+     return 77; /* SKIP */
+#endif
  }

This function has no callers if CONFIG_SIGV1 is not set and otherwise it's useless also if someone was a user of the library only. I would consider ifdef'ing the whole function...

Agreed. key2bin() and calc_keyid_v1() are now fully commented out in the next version, as well as cmd_convert() and read_pub_key() as you suggested.

Quoted 14 lines
Quoted 14 lines
src/libimaevm.c +2 -0
  void calc_keyid_v1(uint8_t *keyid, char *str, const unsigned char *pkey, int len)
  {
+#if CONFIG_SIGV1
      uint8_t sha1[SHA_DIGEST_LENGTH];
      uint64_t id;
 
@@ -799,6 +813,7 @@ void calc_keyid_v1(uint8_t *keyid, char *str, const unsigned char *pkey, int len
 
      if (imaevm_params.verbose > LOG_INFO)
              log_info("keyid-v1: %s\n", str);
+#endif
  }
Signature · 3 lines
thanks,

Mimi
author maintainer
#12 lore raw

RFC PATCH 5/11 Replace the low level SHA1 calls when calculating the TPM 1.2 PCRs

In reply to Mimi Zohar

OpenSSL v3 emits deprecated warnings for SHA1 functions. Use the EVP_ functions when walking the TPM 1.2 binary bios measurements to calculate the TPM 1.2 PCRs.

---
 src/evmctl.c | 65 +++++++++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 59 insertions(+), 6 deletions(-)
src/evmctl.c +59 -6
index 621136b5b85f..6534950f3683 100644
@@ -2296,6 +2296,11 @@ static int cmd_ima_measurement(struct command *cmd)
 	return ima_measurement(file);
 }
 
+/*
+ * read_binary_bios_measurements - read the TPM 1.2 event log
+ *
+ * Returns 0 on success, 1 on failure.
+ */
 #define MAX_EVENT_DATA_SIZE 200000
 static int read_binary_bios_measurements(char *file, struct tpm_bank_info *bank)
 {
@@ -2308,12 +2313,19 @@ static int read_binary_bios_measurements(char *file, struct tpm_bank_info *bank)
 		} header;
 		unsigned char data[MAX_EVENT_DATA_SIZE];
 	} event;
+	EVP_MD_CTX *mdctx;
+	const EVP_MD *md;
+	unsigned int mdlen;
+	int evp_err = 1;	/* success */
 	struct stat s;
 	FILE *fp;
-	SHA_CTX c;
 	int err = 0;
 	int len;
 	int i;
+#if OPENSSL_VERSION_NUMBER < 0x10100000
+	EVP_MD_CTX ctx;
+	mdctx = &ctx;
+#endif
 
 	if (stat(file, &s) == -1) {
 		errno = 0;
@@ -2335,6 +2347,23 @@ static int read_binary_bios_measurements(char *file, struct tpm_bank_info *bank)
 	if (imaevm_params.verbose > LOG_INFO)
 		log_info("Reading the TPM 1.2 event log %s.\n", file);
 
+	md = EVP_get_digestbyname(bank->algo_name);
+	if (!md) {
+		log_errno("Unknown message digest %s\n", bank->algo_name);
+		errno = 0;
+		fclose(fp);
+		return 1;
+	}
+
+#if OPENSSL_VERSION_NUMBER >= 0x10100000
+	mdctx = EVP_MD_CTX_new();
+	if (!mdctx) {
+		log_err("EVP_MD_CTX_new failed\n");
+		fclose(fp);
+		return 1;
+	}
+#endif
+
 	/* Extend the pseudo TPM PCRs with the event digest */
 	while (fread(&event, sizeof(event.header), 1, fp) == 1) {
 		if (imaevm_params.verbose > LOG_INFO) {
@@ -2343,13 +2372,30 @@ static int read_binary_bios_measurements(char *file, struct tpm_bank_info *bank)
 		}
 		if (event.header.pcr >= NUM_PCRS) {
 			log_err("Invalid PCR %d.\n", event.header.pcr);
-			err = 1;
 			break;
 		}
-		SHA1_Init(&c);
-		SHA1_Update(&c, bank->pcr[event.header.pcr], 20);
-		SHA1_Update(&c, event.header.digest, 20);
-		SHA1_Final(bank->pcr[event.header.pcr], &c);
+
+		evp_err = EVP_DigestInit(mdctx, md);
+		if (evp_err == 0) {
+			log_err("EVP_DigestInit() failed\n");
+			break;
+		}
+
+		evp_err = EVP_DigestUpdate(mdctx, bank->pcr[event.header.pcr], 20);
+		if (evp_err == 0) {
+			log_err("EVP_DigestUpdate() failed\n");
+			break;
+		}
+		evp_err = EVP_DigestUpdate(mdctx, event.header.digest, 20);
+		if (evp_err == 0) {
+			log_err("EVP_DigestUpdate() failed\n");
+			break;
+		}
+		evp_err = EVP_DigestFinal(mdctx, bank->pcr[event.header.pcr], &mdlen);
+		if (evp_err == 0) {
+			log_err("EVP_DigestFinal() failed\n");
+			break;
+		}
 		if (event.header.len > MAX_EVENT_DATA_SIZE) {
 			log_err("Event data event too long.\n");
 			err = 1;
@@ -2358,10 +2404,17 @@ static int read_binary_bios_measurements(char *file, struct tpm_bank_info *bank)
 		len = fread(event.data, event.header.len, 1, fp);
 		if (len != 1) {
 			log_errno("Failed reading event data (short read)\n");
+			err = 1;
 			break;
 		}
 	}
+
+	if (evp_err == 0) /* EVP_ functions return 1 on success, 0 on failure */
+		err = 1;
 	fclose(fp);
+#if OPENSSL_VERSION_NUMBER >= 0x10100000
+	EVP_MD_CTX_free(mdctx);
+#endif
 
 	if (imaevm_params.verbose <= LOG_INFO)
 		return err;
Signature · 1 line
2.31.1
Reviewed-by on v1 5/11
#13 lore raw

Re: [RFC PATCH ima-evm-utils 05/11] Replace the low level SHA1 calls when calculating the TPM 1.2 PCRs

Hi Mimi,

Quoted 3 lines

OpenSSL v3 emits deprecated warnings for SHA1 functions. Use the EVP_ functions when walking the TPM 1.2 binary bios measurements to calculate the TPM 1.2 PCRs.

LGTM.

Kind regards,
Petr

author maintainer
#14 lore raw

RFC PATCH 6/11 Replace the low level HMAC calls when calculating the EVM HMAC

In reply to Mimi Zohar

Calculating the EVM HMAC and labeling the filesystem was originally included in ima-evm-utils for debugging purposes only. For now, instead of removing EVM HMAC support just replace the low level HMAC_ calls with EVP_ calls.

The '-a, --hashalgo' specifies the IMA hash or signature algorithm. The kernel EVM HMAC is limited to SHA1. Fix ima-evm-utils by hard coding the EVM HMAC algorithm to SHA1.

---
 src/evmctl.c | 57 +++++++++++++++++++++++++++++-----------------------
 1 file changed, 32 insertions(+), 25 deletions(-)
src/evmctl.c +32 -25
index 6534950f3683..913b85f6b620 100644
@@ -1160,12 +1160,12 @@ static int cmd_setxattr_ima(struct command *cmd)
 
 static int calc_evm_hmac(const char *file, const char *keyfile, unsigned char *hash)
 {
-        const EVP_MD *md;
+	size_t mdlen;
+	EVP_MD_CTX *pctx;
+	EVP_PKEY *pkey = NULL;
 	struct stat st;
 	int err = -1;
 	uint32_t generation = 0;
-	HMAC_CTX *pctx;
-	unsigned int mdlen;
 	char **xattrname;
 	unsigned char xattr_value[1024];
 	unsigned char *key;
@@ -1176,10 +1176,8 @@ static int calc_evm_hmac(const char *file, const char *keyfile, unsigned char *h
 	struct h_misc_64 hmac_misc;
 	int hmac_size;
 #if OPENSSL_VERSION_NUMBER < 0x10100000
-	HMAC_CTX ctx;
+	EVP_MD_CTX ctx;
 	pctx = &ctx;
-#else
-	pctx = HMAC_CTX_new();
 #endif
 
 	key = file2bin(keyfile, NULL, &keylen);
@@ -1227,19 +1225,26 @@ static int calc_evm_hmac(const char *file, const char *keyfile, unsigned char *h
 		goto out;
 	}
 
-	md = EVP_get_digestbyname(imaevm_params.hash_algo);
-	if (!md) {
-		log_err("EVP_get_digestbyname(%s) failed\n",
-			imaevm_params.hash_algo);
+#if OPENSSL_VERSION_NUMBER >= 0x10100000
+	pctx = EVP_MD_CTX_new();
+	if (!pctx) {
+		log_err("EVP_MD_CTX_new failed\n");
 		goto out;
 	}
+#endif
 
-	err = !HMAC_Init_ex(pctx, evmkey, sizeof(evmkey), md, NULL);
-	if (err) {
+	pkey = EVP_PKEY_new_mac_key(EVP_PKEY_HMAC, NULL, evmkey, sizeof(evmkey));
+	if (!pkey) {
 		log_err("HMAC_Init() failed\n");
 		goto out;
 	}
 
+	err = EVP_DigestSignInit(pctx, NULL, EVP_sha1(), NULL, pkey);
+	if (err != 1) {
+		log_err("EVP_DigestSignInit() failed\n");
+		goto out;
+	}
+
 	for (xattrname = evm_config_xattrnames; *xattrname != NULL; xattrname++) {
 		err = lgetxattr(file, *xattrname, xattr_value, sizeof(xattr_value));
 		if (err < 0) {
@@ -1250,12 +1255,12 @@ static int calc_evm_hmac(const char *file, const char *keyfile, unsigned char *h
 			log_info("skipping xattr: %s\n", *xattrname);
 			continue;
 		}
-		/*log_debug("name: %s, value: %s, size: %d\n", *xattrname, xattr_value, err);*/
 		log_info("name: %s, size: %d\n", *xattrname, err);
 		log_debug_dump(xattr_value, err);
-		err = !HMAC_Update(pctx, xattr_value, err);
-		if (err) {
-			log_err("HMAC_Update() failed\n");
+
+		err = EVP_DigestSignUpdate(pctx, xattr_value, err);
+		if (err != 1) {
+			log_err("EVP_DigestSignUpdate() failed\n");
 			goto out_ctx_cleanup;
 		}
 	}
@@ -1294,23 +1299,24 @@ static int calc_evm_hmac(const char *file, const char *keyfile, unsigned char *h
 	log_debug("hmac_misc (%d): ", hmac_size);
 	log_debug_dump(&hmac_misc, hmac_size);
 
-	err = !HMAC_Update(pctx, (const unsigned char *)&hmac_misc, hmac_size);
-	if (err) {
+	err = EVP_DigestSignUpdate(pctx, &hmac_misc, hmac_size);
+	if (err != 1) {
 		log_err("HMAC_Update() failed\n");
 		goto out_ctx_cleanup;
 	}
-	err = !HMAC_Final(pctx, hash, &mdlen);
-	if (err)
+	err = EVP_DigestSignFinal(pctx, hash, &mdlen);
+	if (err != 1)
 		log_err("HMAC_Final() failed\n");
 out_ctx_cleanup:
-#if OPENSSL_VERSION_NUMBER < 0x10100000
-	HMAC_CTX_cleanup(pctx);
-#else
-	HMAC_CTX_free(pctx);
+	EVP_PKEY_free(pkey);
+#if OPENSSL_VERSION_NUMBER >= 0x10100000
+	EVP_MD_CTX_free(pctx);
 #endif
 out:
 	free(key);
-	return err ?: mdlen;
+	if (err == 1)
+		return mdlen;
+	return err;
 }
 
 static int hmac_evm(const char *file, const char *key)
@@ -1334,6 +1340,7 @@ static int hmac_evm(const char *file, const char *key)
 		err = lsetxattr(file, xattr_evm, sig, len + 1, 0);
 		if (err < 0) {
 			log_err("setxattr failed: %s\n", file);
+			errno = 0;
 			return err;
 		}
 	}
Signature · 1 line
2.31.1
Reviewed-by on v1 6/11
#15 lore raw

Re: [RFC PATCH ima-evm-utils 06/11] Replace the low level HMAC calls when calculating the EVM HMAC

Hi mImi,

Quoted 8 lines

Calculating the EVM HMAC and labeling the filesystem was originally included in ima-evm-utils for debugging purposes only. For now, instead of removing EVM HMAC support just replace the low level HMAC_ calls with EVP_ calls.

The '-a, --hashalgo' specifies the IMA hash or signature algorithm. The kernel EVM HMAC is limited to SHA1. Fix ima-evm-utils by hard coding the EVM HMAC algorithm to SHA1.

LGTM.

Kind regards,
Petr

author maintainer
#16 lore raw

RFC PATCH 7/11 Add missing EVP_MD_CTX_free() call in calc_evm_hash()

In reply to Mimi Zohar

When EVP_MD_CTX_new() call was added, the corresponding EVP_MD_CTX_free() was never called. Properly free it.

Fixes 81010f0d87ef ("ima-evm-utils: Add backward compatible support for openssl 1.1")
---
 src/evmctl.c | 57 ++++++++++++++++++++++++++++++++++++----------------
 1 file changed, 40 insertions(+), 17 deletions(-)
src/evmctl.c +40 -17
index 913b85f6b620..490d355188d0 100644
@@ -331,11 +331,17 @@ err:
 	return -1;
 }
 
+/*
+ * calc_evm_hash - calculate the file metadata hash
+ *
+ * Returns 0 for EVP_ function failures. Return -1 for other failures.
+ * Return hash algorithm size on success.
+ */
 static int calc_evm_hash(const char *file, unsigned char *hash)
 {
         const EVP_MD *md;
 	struct stat st;
-	int err;
+	int err = -1;
 	uint32_t generation = 0;
 	EVP_MD_CTX *pctx;
 	unsigned int mdlen;
@@ -349,12 +355,11 @@ static int calc_evm_hash(const char *file, unsigned char *hash)
 #if OPENSSL_VERSION_NUMBER < 0x10100000
 	EVP_MD_CTX ctx;
 	pctx = &ctx;
-#else
-	pctx = EVP_MD_CTX_new();
 #endif
 
 	if (lstat(file, &st)) {
 		log_err("Failed to stat: %s\n", file);
+		errno = 0;
 		return -1;
 	}
 
@@ -391,20 +396,30 @@ static int calc_evm_hash(const char *file, unsigned char *hash)
 	list_size = llistxattr(file, list, sizeof(list));
 	if (list_size < 0) {
 		log_err("llistxattr() failed\n");
+		errno = 0;
 		return -1;
 	}
 
+#if OPENSSL_VERSION_NUMBER >= 0x10100000
+	pctx = EVP_MD_CTX_new();
+	if (!pctx) {
+		log_err("EVP_MD_CTX_new() failed\n");
+		return 0;
+	}
+#endif
+
 	md = EVP_get_digestbyname(imaevm_params.hash_algo);
 	if (!md) {
 		log_err("EVP_get_digestbyname(%s) failed\n",
 			imaevm_params.hash_algo);
-		return 1;
+		err = 0;
+		goto out;
 	}
 
 	err = EVP_DigestInit(pctx, md);
 	if (!err) {
 		log_err("EVP_DigestInit() failed\n");
-		return 1;
+		goto out;
 	}
 
 	for (xattrname = evm_config_xattrnames; *xattrname != NULL; xattrname++) {
@@ -415,7 +430,8 @@ static int calc_evm_hash(const char *file, unsigned char *hash)
 			if (err > sizeof(xattr_value)) {
 				log_err("selinux[%u] value is too long to fit into xattr[%zu]\n",
 					err, sizeof(xattr_value));
-				return -1;
+				err = -1;
+				goto out;
 			}
 			strcpy(xattr_value, selinux_str);
 		} else if (!strcmp(*xattrname, XATTR_NAME_IMA) && ima_str) {
@@ -423,7 +439,8 @@ static int calc_evm_hash(const char *file, unsigned char *hash)
 			if (err > sizeof(xattr_value)) {
 				log_err("ima[%u] value is too long to fit into xattr[%zu]\n",
 					err, sizeof(xattr_value));
-				return -1;
+				err = -1;
+				goto out;
 			}
 			hex2bin(xattr_value, ima_str, err);
 		} else if (!strcmp(*xattrname, XATTR_NAME_IMA) && evm_portable){
@@ -432,7 +449,7 @@ static int calc_evm_hash(const char *file, unsigned char *hash)
 			if (err < 0) {
 				log_err("EVM portable sig: %s required\n",
 					xattr_ima);
-				return -1;
+				goto out;
 			}
 			use_xattr_ima = 1;
 		} else if (!strcmp(*xattrname, XATTR_NAME_CAPS) && (hmac_flags & HMAC_FLAG_CAPS_SET)) {
@@ -442,7 +459,8 @@ static int calc_evm_hash(const char *file, unsigned char *hash)
 			if (err >= sizeof(xattr_value)) {
 				log_err("caps[%u] value is too long to fit into xattr[%zu]\n",
 					err + 1, sizeof(xattr_value));
-				return -1;
+				err = -1;
+				goto out;
 			}
 			strcpy(xattr_value, caps_str);
 		} else {
@@ -463,7 +481,7 @@ static int calc_evm_hash(const char *file, unsigned char *hash)
 		err = EVP_DigestUpdate(pctx, xattr_value, err);
 		if (!err) {
 			log_err("EVP_DigestUpdate() failed\n");
-			return 1;
+			goto out;
 		}
 	}
 
@@ -517,29 +535,33 @@ static int calc_evm_hash(const char *file, unsigned char *hash)
 	err = EVP_DigestUpdate(pctx, &hmac_misc, hmac_size);
 	if (!err) {
 		log_err("EVP_DigestUpdate() failed\n");
-		return 1;
+		goto out;
 	}
 
 	if (!evm_immutable && !evm_portable &&
 	    !(hmac_flags & HMAC_FLAG_NO_UUID)) {
 		err = get_uuid(&st, uuid);
 		if (err)
-			return -1;
+			goto out;
 
 		err = EVP_DigestUpdate(pctx, (const unsigned char *)uuid, sizeof(uuid));
 		if (!err) {
 			log_err("EVP_DigestUpdate() failed\n");
-			return 1;
+			goto out;
 		}
 	}
 
 	err = EVP_DigestFinal(pctx, hash, &mdlen);
-	if (!err) {
+	if (!err)
 		log_err("EVP_DigestFinal() failed\n");
-		return 1;
-	}
 
-	return mdlen;
+out:
+#if OPENSSL_VERSION_NUMBER >= 0x10100000
+	EVP_MD_CTX_free(pctx);
+#endif
+	if (err == 1)
+		return mdlen;
+	return err;
 }
 
 static int sign_evm(const char *file, const char *key)
@@ -575,6 +597,7 @@ static int sign_evm(const char *file, const char *key)
 		err = lsetxattr(file, xattr_evm, sig, len, 0);
 		if (err < 0) {
 			log_err("setxattr failed: %s\n", file);
+			errno = 0;
 			return err;
 		}
 	}
Signature · 1 line
2.31.1
Reviewed-by on v1 7/11
#17 lore raw

Re: [RFC PATCH ima-evm-utils 07/11] Add missing EVP_MD_CTX_free() call in calc_evm_hash()

Hi Mimi,

Quoted 4 lines

When EVP_MD_CTX_new() call was added, the corresponding EVP_MD_CTX_free() was never called. Properly free it.

Fixes 81010f0d87ef ("ima-evm-utils: Add backward compatible support for openssl 1.1")

Kind regards,
Petr

author maintainer
#18 lore raw

RFC PATCH 8/11 Deprecate use of OpenSSL 3 "engine" support

In reply to Mimi Zohar

OpenSSL 3 "engine" support is deprecated, which results in deprecated build warning messages. In preparation for OpenSSL "engine" support to be removed, define a "--enable-engine" configuration option. If not specified, disable engine support on systems with OpenSSL v3.

When ima-evm-utils engine support is disabled, don't execute the tests requiring it.

---
 configure.ac           | 15 +++++++++++++++
 src/Makefile.am        |  8 ++++++++
 src/evmctl.c           | 17 +++++++++++++++--
 src/imaevm.h           |  2 ++
 src/libimaevm.c        |  5 +++++
 tests/functions.sh     | 11 ++++++++++-
 tests/ima_hash.test    |  9 +++++++++
 tests/sign_verify.test | 10 ++++++++++
 8 files changed, 74 insertions(+), 3 deletions(-)
configure.ac +15 -0
index dc666f2bb1fa..5e0b78eb651b 100644
@@ -54,6 +54,19 @@ AC_ARG_ENABLE(sigv1,
 	AM_CONDITIONAL([CONFIG_SIGV1], [test "x$enable_sigv1" = "xyes"])
 	AS_IF([test "$enable_sigv1"  != "yes"], [enable_sigv1="no"])
 
+AC_ARG_ENABLE(engine,
+	      [AS_HELP_STRING([--enable-engine], [build ima-evm-utils with OpenSSL engine support])])
+
+ssl_version=$(openssl version | sed -e 's/^OpenSSL //' | sed -e 's/ .*//')
+if test -z "$enable_engine"; then
+	if test "${ssl_version::1}" = "3"; then
+		enable_engine="no"
+	else
+		enable_engine="yes"
+	fi
+fi
+AM_CONDITIONAL([CONFIG_ENGINE], [test "x$enable_engine" = "xyes"])
+
 #debug support - yes for a while
 PKG_ARG_ENABLE(debug, "yes", DEBUG, [Enable Debug support])
 if test $pkg_cv_enable_debug = yes; then
@@ -89,5 +102,7 @@ echo	"      tss2-esys: $ac_cv_lib_tss2_esys_Esys_Free"
 echo	" tss2-rc-decode: $ac_cv_lib_tss2_rc_Tss2_RC_Decode"
 echo    "         ibmtss: $ac_cv_header_ibmtss_tss_h"
 echo    "         sigv1:  $enable_sigv1"
+echo    "         engine: $enable_engine"
+echo    "            ssl: $ssl_version"
 echo	"            doc: $have_doc"
 echo
src/Makefile.am +8 -0
index 90c7249020cf..a810d6e0acff 100644
@@ -11,6 +11,10 @@ if CONFIG_SIGV1
 libimaevm_la_CFLAGS = -DCONFIG_SIGV1
 endif
 
+if CONFIG_ENGINE
+libimaevm_la_CFLAGS = -DCONFIG_ENGINE
+endif
+
 include_HEADERS = imaevm.h
 
 nodist_libimaevm_la_SOURCES = hash_info.h
@@ -31,6 +35,10 @@ if CONFIG_SIGV1
 evmctl_CFLAGS = -DCONFIG_SIGV1
 endif
 
+# Enable "--engine" support
+if CONFIG_ENGINE
+evmctl_CFLAGS = -DCONFIG_ENGINE
+endif
 
 # USE_PCRTSS uses the Intel TSS
 if USE_PCRTSS
src/evmctl.c +15 -2
index 490d355188d0..ad96789f1984 100644
@@ -64,7 +64,9 @@
 #include <openssl/hmac.h>
 #include <openssl/err.h>
 #include <openssl/rsa.h>
+#if CONFIG_ENGINE
 #include <openssl/engine.h>
+#endif
 #include <openssl/x509v3.h>
 #include "hash_info.h"
 #include "pcr.h"
@@ -2715,7 +2717,7 @@ static void usage(void)
 		"      --selinux      use custom Selinux label for EVM\n"
 		"      --caps         use custom Capabilities for EVM(unspecified: from FS, empty: do not use)\n"
 		"      --verify-sig   verify measurement list signatures\n"
-		"      --engine e     preload OpenSSL engine e (such as: gost)\n"
+		"      --engine e     preload OpenSSL engine e (such as: gost) id deprecated\n"
 		"      --ignore-violations ignore ToMToU measurement violations\n"
 		"  -v                 increase verbosity level\n"
 		"  -h, --help         display this help and exit\n"
@@ -2828,7 +2830,9 @@ static char *get_password(void)
 
 static ENGINE *setup_engine(const char *engine_id)
 {
+#if CONFIG_ENGINE
 	ENGINE *eng = ENGINE_by_id(engine_id);
+
 	if (!eng) {
 		log_err("engine %s isn't available\n", optarg);
 		ERR_print_errors_fp(stderr);
@@ -2841,6 +2845,9 @@ static ENGINE *setup_engine(const char *engine_id)
 	if (eng)
 		ENGINE_set_default(eng, ENGINE_METHOD_ALL);
 	return eng;
+#endif
+	log_err("OpenSSL 3 \"engine\" support is deprecated\n");
+	return NULL;
 }
 
 int main(int argc, char *argv[])
@@ -2969,8 +2976,12 @@ int main(int argc, char *argv[])
 			break;
 		case 139: /* --engine e */
 			imaevm_params.eng = setup_engine(optarg);
-			if (!imaevm_params.eng)
+			if (!imaevm_params.eng) {
+#ifndef CONFIG_ENGINE
+				err = 77; /* SKIP */
+#endif
 				goto error;
+			}
 			break;
 		case 140: /* --xattr-user */
 			xattr_ima = "user.ima";
@@ -3056,6 +3067,7 @@ int main(int argc, char *argv[])
 	}
 
 error:
+#if CONFIG_ENGINE
 	if (imaevm_params.eng) {
 		ENGINE_finish(imaevm_params.eng);
 		ENGINE_free(imaevm_params.eng);
@@ -3063,6 +3075,7 @@ error:
 		ENGINE_cleanup();
 #endif
 	}
+#endif
 	ERR_free_strings();
 	EVP_cleanup();
 	BIO_free(NULL);
src/imaevm.h +2 -0
index afcf1e042014..ebe8c20d566a 100644
@@ -48,7 +48,9 @@
 #include <errno.h>
 #include <sys/types.h>
 #include <openssl/rsa.h>
+#ifdef CONFIG_ENGINE
 #include <openssl/engine.h>
+#endif
 
 #ifdef USE_FPRINTF
 #define do_log(level, fmt, args...)	\
src/libimaevm.c +5 -0
index cb815f953a80..d81bdbb85250 100644
@@ -965,6 +965,7 @@ static EVP_PKEY *read_priv_pkey(const char *keyfile, const char *keypass)
 	EVP_PKEY *pkey;
 
 	if (!strncmp(keyfile, "pkcs11:", 7)) {
+#ifdef CONFIG_ENGINE
 		if (!imaevm_params.keyid) {
 			log_err("When using a pkcs11 URI you must provide the keyid with an option\n");
 			return NULL;
@@ -981,6 +982,10 @@ static EVP_PKEY *read_priv_pkey(const char *keyfile, const char *keypass)
 			log_err("Failed to load private key %s\n", keyfile);
 			goto err_engine;
 		}
+#else
+		log_err("OpenSSL 3 \"engine\" support is deprecated\n");
+		goto err_engine;
+#endif
 	} else {
 		fp = fopen(keyfile, "r");
 		if (!fp) {
tests/functions.sh +10 -1
index 8f6f02dfcd95..ddc8fe9e5ea6 100755
@@ -312,4 +312,13 @@ _softhsm_teardown() {
   rm -rf "${SOFTHSM_SETUP_CONFIGDIR}"
   unset SOFTHSM_SETUP_CONFIGDIR SOFTHSM2_CONF PKCS11_KEYURI \
     EVMCTL_ENGINE OPENSSL_ENGINE OPENSSL_KEYFORM
-}
\ No newline at end of file
+}
+
+# OpenSSL 3 engine support still works, but is deprecated. In preparation
+# for it being removed, a new ima-evm-utils configuration option
+# "--enable-engine" is defined.`
+_is_engine_supported() {
+  cmd="evmctl --engine pkcs11"
+  $cmd &>/dev/null
+  ENGINE_SUPPORTED=$?
+}
tests/ima_hash.test +9 -0
index e88fd59cc359..0de9e6808af9 100755
@@ -71,6 +71,15 @@ expect_pass check  sha384     0x0405 38b060a751ac96384cd9327eb1b1e36a21fdb71114b
 expect_pass check  sha512     0x0406 cf83e1357eefb8bdf1542850d66d8007d620e4050b5715dc83f4a921d36ce9ce47d0d13c5d85f2b0ff8318d2877eec2f63b931bd47417a81a538327af927da3e
 expect_pass check  rmd160     0x0403 9c1185a5c5e9fc54612808977ee8f548b2258d31
 expect_pass check  sm3        0x0411 1ab21d8355cfa17f8e61194831e81a8f22bec8c728fefb747ed035eb5082aa2b
+
+# Remaining tests require engine support
+_is_engine_supported
+if [ $ENGINE_SUPPORTED -eq 77 ]; then
+  __skip() { echo "Tests requiring engine support are skipped (not supported)"; return $SKIP; }
+  expect_pass __skip
+  exit 0
+fi
+
 _enable_gost_engine
 expect_pass check  md_gost12_256 0x0412 3f539a213e97c802cc229d474c6aa32a825a360b2a933a949fd925208d9ce1bb
 expect_pass check  streebog256   0x0412 3f539a213e97c802cc229d474c6aa32a825a360b2a933a949fd925208d9ce1bb
tests/sign_verify.test +10 -0
index 948892759424..8c005b741916 100755
@@ -18,6 +18,8 @@
 cd "$(dirname "$0")" || exit 1
 PATH=../src:$PATH
 SIGV1=0
+ENGINE_SUPPORTED=0
+
 source ./functions.sh
 
 _require cmp evmctl getfattr openssl xxd
@@ -418,6 +420,14 @@ if [ -x /opt/openssl3/bin/openssl ]; then
     sign_verify  sm2    sm3    0x030211:K:004[345678]
 fi
 
+# Remaining tests require engine support
+_is_engine_supported
+if [ $ENGINE_SUPPORTED -eq 77 ]; then
+  __skip() { echo "Tests requiring engine support are skipped (not supported)"; return $SKIP; }
+  expect_pass __skip
+  exit 0
+fi
+
 # Test v2 signatures with EC-RDSA
 _enable_gost_engine
 sign_verify  gost2012_256-A md_gost12_256 0x030212:K:0040
Signature · 1 line
2.31.1
#19 lore raw

Re: [RFC PATCH ima-evm-utils 08/11] Deprecate use of OpenSSL 3 "engine" support

Mimi,

Quoted 4 lines · Mimi Zohar

OpenSSL 3 "engine" support is deprecated, which results in deprecated build warning messages. In preparation for OpenSSL "engine" support to be removed, define a "--enable-engine" configuration option. If not specified, disable engine support on systems with OpenSSL v3.

This seems to change default behavior.

Many distributions (AFAIK) still contain openssl1, and some contain both openssl1 and openssl3, including devel packages. So they will suddenly drop --engine support on ima-evm-utils update, even though their OpenSSL supports it.

Maybe --disable-engine should be added instead if user wants to avoid compile time deprecation warnings?

(Also, engines aren't just deprecated, they are deprecated in favor of providers.)

Quoted 89 lines

When ima-evm-utils engine support is disabled, don't execute the tests requiring it.

---
 configure.ac           | 15 +++++++++++++++
 src/Makefile.am        |  8 ++++++++
 src/evmctl.c           | 17 +++++++++++++++--
 src/imaevm.h           |  2 ++
 src/libimaevm.c        |  5 +++++
 tests/functions.sh     | 11 ++++++++++-
 tests/ima_hash.test    |  9 +++++++++
 tests/sign_verify.test | 10 ++++++++++
 8 files changed, 74 insertions(+), 3 deletions(-)
configure.ac +15 -0
index dc666f2bb1fa..5e0b78eb651b 100644
@@ -54,6 +54,19 @@ AC_ARG_ENABLE(sigv1,
 	AM_CONDITIONAL([CONFIG_SIGV1], [test "x$enable_sigv1" = "xyes"])
 	AS_IF([test "$enable_sigv1"  != "yes"], [enable_sigv1="no"])
 
+AC_ARG_ENABLE(engine,
+	      [AS_HELP_STRING([--enable-engine], [build ima-evm-utils with OpenSSL engine support])])
+
+ssl_version=$(openssl version | sed -e 's/^OpenSSL //' | sed -e 's/ .*//')
+if test -z "$enable_engine"; then
+	if test "${ssl_version::1}" = "3"; then
+		enable_engine="no"
+	else
+		enable_engine="yes"
+	fi
+fi
+AM_CONDITIONAL([CONFIG_ENGINE], [test "x$enable_engine" = "xyes"])
+
 #debug support - yes for a while
 PKG_ARG_ENABLE(debug, "yes", DEBUG, [Enable Debug support])
 if test $pkg_cv_enable_debug = yes; then
@@ -89,5 +102,7 @@ echo	"      tss2-esys: $ac_cv_lib_tss2_esys_Esys_Free"
 echo	" tss2-rc-decode: $ac_cv_lib_tss2_rc_Tss2_RC_Decode"
 echo    "         ibmtss: $ac_cv_header_ibmtss_tss_h"
 echo    "         sigv1:  $enable_sigv1"
+echo    "         engine: $enable_engine"
+echo    "            ssl: $ssl_version"
 echo	"            doc: $have_doc"
 echo
src/Makefile.am +8 -0
index 90c7249020cf..a810d6e0acff 100644
@@ -11,6 +11,10 @@ if CONFIG_SIGV1
 libimaevm_la_CFLAGS = -DCONFIG_SIGV1
 endif
 
+if CONFIG_ENGINE
+libimaevm_la_CFLAGS = -DCONFIG_ENGINE
+endif
+
 include_HEADERS = imaevm.h
 
 nodist_libimaevm_la_SOURCES = hash_info.h
@@ -31,6 +35,10 @@ if CONFIG_SIGV1
 evmctl_CFLAGS = -DCONFIG_SIGV1
 endif
 
+# Enable "--engine" support
+if CONFIG_ENGINE
+evmctl_CFLAGS = -DCONFIG_ENGINE
+endif
 
 # USE_PCRTSS uses the Intel TSS
 if USE_PCRTSS
src/evmctl.c +2 -0
index 490d355188d0..ad96789f1984 100644
@@ -64,7 +64,9 @@
 #include <openssl/hmac.h>
 #include <openssl/err.h>
 #include <openssl/rsa.h>
+#if CONFIG_ENGINE
 #include <openssl/engine.h>
+#endif
 #include <openssl/x509v3.h>
 #include "hash_info.h"
 #include "pcr.h"

src/evmctl.c static void usage(void) · line 2720

Quoted 5 lines
src/evmctl.c +1 -1
@@ -2715,7 +2717,7 @@ static void usage(void)
 		"      --selinux      use custom Selinux label for EVM\n"
 		"      --caps         use custom Capabilities for EVM(unspecified: from FS, empty: do not use)\n"
 		"      --verify-sig   verify measurement list signatures\n"
-		"      --engine e     preload OpenSSL engine e (such as: gost)\n"
+		"      --engine e     preload OpenSSL engine e (such as: gost) id deprecated\n"

Typo.

Quoted 97 lines
src/evmctl.c +12 -1
 		"      --ignore-violations ignore ToMToU measurement violations\n"
 		"  -v                 increase verbosity level\n"
 		"  -h, --help         display this help and exit\n"
@@ -2828,7 +2830,9 @@ static char *get_password(void)
 
 static ENGINE *setup_engine(const char *engine_id)
 {
+#if CONFIG_ENGINE
 	ENGINE *eng = ENGINE_by_id(engine_id);
+
 	if (!eng) {
 		log_err("engine %s isn't available\n", optarg);
 		ERR_print_errors_fp(stderr);
@@ -2841,6 +2845,9 @@ static ENGINE *setup_engine(const char *engine_id)
 	if (eng)
 		ENGINE_set_default(eng, ENGINE_METHOD_ALL);
 	return eng;
+#endif
+	log_err("OpenSSL 3 \"engine\" support is deprecated\n");
+	return NULL;
 }
 
 int main(int argc, char *argv[])
@@ -2969,8 +2976,12 @@ int main(int argc, char *argv[])
 			break;
 		case 139: /* --engine e */
 			imaevm_params.eng = setup_engine(optarg);
-			if (!imaevm_params.eng)
+			if (!imaevm_params.eng) {
+#ifndef CONFIG_ENGINE
+				err = 77; /* SKIP */
+#endif
 				goto error;
+			}
 			break;
 		case 140: /* --xattr-user */
 			xattr_ima = "user.ima";
@@ -3056,6 +3067,7 @@ int main(int argc, char *argv[])
 	}
 
 error:
+#if CONFIG_ENGINE
 	if (imaevm_params.eng) {
 		ENGINE_finish(imaevm_params.eng);
 		ENGINE_free(imaevm_params.eng);
@@ -3063,6 +3075,7 @@ error:
 		ENGINE_cleanup();
 #endif
 	}
+#endif
 	ERR_free_strings();
 	EVP_cleanup();
 	BIO_free(NULL);
src/imaevm.h +2 -0
index afcf1e042014..ebe8c20d566a 100644
@@ -48,7 +48,9 @@
 #include <errno.h>
 #include <sys/types.h>
 #include <openssl/rsa.h>
+#ifdef CONFIG_ENGINE
 #include <openssl/engine.h>
+#endif
 
 #ifdef USE_FPRINTF
 #define do_log(level, fmt, args...)	\
src/libimaevm.c +5 -0
index cb815f953a80..d81bdbb85250 100644
@@ -965,6 +965,7 @@ static EVP_PKEY *read_priv_pkey(const char *keyfile, const char *keypass)
 	EVP_PKEY *pkey;
 
 	if (!strncmp(keyfile, "pkcs11:", 7)) {
+#ifdef CONFIG_ENGINE
 		if (!imaevm_params.keyid) {
 			log_err("When using a pkcs11 URI you must provide the keyid with an option\n");
 			return NULL;
@@ -981,6 +982,10 @@ static EVP_PKEY *read_priv_pkey(const char *keyfile, const char *keypass)
 			log_err("Failed to load private key %s\n", keyfile);
 			goto err_engine;
 		}
+#else
+		log_err("OpenSSL 3 \"engine\" support is deprecated\n");
+		goto err_engine;
+#endif
 	} else {
 		fp = fopen(keyfile, "r");
 		if (!fp) {
tests/functions.sh +0 -0
index 8f6f02dfcd95..ddc8fe9e5ea6 100755
@@ -312,4 +312,13 @@ _softhsm_teardown() {
   rm -rf "${SOFTHSM_SETUP_CONFIGDIR}"
   unset SOFTHSM_SETUP_CONFIGDIR SOFTHSM2_CONF PKCS11_KEYURI \

tests/functions.sh _softhsm_teardown() { · line 321

Quoted 10 lines
tests/functions.sh +7 -1
     EVMCTL_ENGINE OPENSSL_ENGINE OPENSSL_KEYFORM
-}
\ No newline at end of file
+}
+
+# OpenSSL 3 engine support still works, but is deprecated. In preparation
+# for it being removed, a new ima-evm-utils configuration option
+# "--enable-engine" is defined.`
+_is_engine_supported() {
+  cmd="evmctl --engine pkcs11"

I think pkcs11 engine is optional (and could be in additional package) even if other engines are present.

Also engine could be loaded via openssl.cnf/OPENSSL_CONF, in that case --engine option is not needed but engine is still there to use/test.

Quoted 9 lines
tests/functions.sh +3 -0
+  $cmd &>/dev/null
+  ENGINE_SUPPORTED=$?
+}
tests/ima_hash.test +0 -0
index e88fd59cc359..0de9e6808af9 100755
@@ -71,6 +71,15 @@ expect_pass check  sha384     0x0405 38b060a751ac96384cd9327eb1b1e36a21fdb71114b
 expect_pass check  sha512     0x0406 cf83e1357eefb8bdf1542850d66d8007d620e4050b5715dc83f4a921d36ce9ce47d0d13c5d85f2b0ff8318d2877eec2f63b931bd47417a81a538327af927da3e

tests/ima_hash.test expect_pass check sha384 0x0405 38b060a751ac96384cd9327eb1b1e36a21fdb71114b · line 81

Quoted 10 lines
tests/ima_hash.test +8 -0
 expect_pass check  rmd160     0x0403 9c1185a5c5e9fc54612808977ee8f548b2258d31
 expect_pass check  sm3        0x0411 1ab21d8355cfa17f8e61194831e81a8f22bec8c728fefb747ed035eb5082aa2b
+
+# Remaining tests require engine support
+_is_engine_supported
+if [ $ENGINE_SUPPORTED -eq 77 ]; then
+  __skip() { echo "Tests requiring engine support are skipped (not supported)"; return $SKIP; }
+  expect_pass __skip
+  exit 0
+fi

GOST tests try to handle absence of algorithms (can work w/o --engine option if configured via openssl config) and skip gracefully. Perhaps this check should be moved below them just for pkcs11 tests if they are so sensitive.

Thanks,

Quoted 34 lines
tests/ima_hash.test +1 -0
+
 _enable_gost_engine
 expect_pass check  md_gost12_256 0x0412 3f539a213e97c802cc229d474c6aa32a825a360b2a933a949fd925208d9ce1bb
 expect_pass check  streebog256   0x0412 3f539a213e97c802cc229d474c6aa32a825a360b2a933a949fd925208d9ce1bb
tests/sign_verify.test +10 -0
index 948892759424..8c005b741916 100755
@@ -18,6 +18,8 @@
 cd "$(dirname "$0")" || exit 1
 PATH=../src:$PATH
 SIGV1=0
+ENGINE_SUPPORTED=0
+
 source ./functions.sh
 
 _require cmp evmctl getfattr openssl xxd
@@ -418,6 +420,14 @@ if [ -x /opt/openssl3/bin/openssl ]; then
     sign_verify  sm2    sm3    0x030211:K:004[345678]
 fi
 
+# Remaining tests require engine support
+_is_engine_supported
+if [ $ENGINE_SUPPORTED -eq 77 ]; then
+  __skip() { echo "Tests requiring engine support are skipped (not supported)"; return $SKIP; }
+  expect_pass __skip
+  exit 0
+fi
+
 # Test v2 signatures with EC-RDSA
 _enable_gost_engine
 sign_verify  gost2012_256-A md_gost12_256 0x030212:K:0040
Signature · 1 line
2.31.1
author maintainer
#20 lore raw

Re: [RFC PATCH ima-evm-utils 08/11] Deprecate use of OpenSSL 3 "engine" support

Hi Vitaly,

Quoted 10 lines · Vitaly Chikunov

Mimi,

Quoted 4 lines · Mimi Zohar

OpenSSL 3 "engine" support is deprecated, which results in deprecated build warning messages. In preparation for OpenSSL "engine" support to be removed, define a "--enable-engine" configuration option. If not specified, disable engine support on systems with OpenSSL v3.

This seems to change default behavior.

Quoted 7 lines

Many distributions (AFAIK) still contain openssl1, and some contain both openssl1 and openssl3, including devel packages. So they will suddenly drop --engine support on ima-evm-utils update, even though their OpenSSL supports it.

Maybe --disable-engine should be added instead if user wants to avoid compile time deprecation warnings?

No, engine support is not disabled for previous versions of OpenSSL. It's only disabled for OpenSSL v3, with the --enable-engine option allowing it to be configured. The "-Wno-deprecated-declarations" option could even be added.

Quoted 3 lines

(Also, engines aren't just deprecated, they are deprecated in favor of providers.)

Right. At some point, OpenSSL engine support will be removed. This
is a first step to removing it in ima-evm-utils. I searched but didn't
find any gost providers. Feel free to add it.

Quoted 24 lines
Quoted 24 lines

When ima-evm-utils engine support is disabled, don't execute the tests requiring it.

---
 configure.ac           | 15 +++++++++++++++
 src/Makefile.am        |  8 ++++++++
 src/evmctl.c           | 17 +++++++++++++++--
 src/imaevm.h           |  2 ++
 src/libimaevm.c        |  5 +++++
 tests/functions.sh     | 11 ++++++++++-
 tests/ima_hash.test    |  9 +++++++++
 tests/sign_verify.test | 10 ++++++++++
 8 files changed, 74 insertions(+), 3 deletions(-)
configure.ac +0 -0
index dc666f2bb1fa..5e0b78eb651b 100644
@@ -54,6 +54,19 @@ AC_ARG_ENABLE(sigv1,
 	AM_CONDITIONAL([CONFIG_SIGV1], [test "x$enable_sigv1" = "xyes"])
 	AS_IF([test "$enable_sigv1"  != "yes"], [enable_sigv1="no"])
 
Quoted 12 lines

configure.ac AC_ARG_ENABLE(sigv1, · line 68

Quoted 12 lines
configure.ac +12 -0
+AC_ARG_ENABLE(engine,
+	      [AS_HELP_STRING([--enable-engine], [build ima-evm-utils with OpenSSL engine support])])
+
+ssl_version=$(openssl version | sed -e 's/^OpenSSL //' | sed -e 's/ .*//')
+if test -z "$enable_engine"; then
+	if test "${ssl_version::1}" = "3"; then
+		enable_engine="no"
+	else
+		enable_engine="yes"
+	fi
+fi
+AM_CONDITIONAL([CONFIG_ENGINE], [test "x$enable_engine" = "xyes"])

Above is the code to conditionally disable engine support based on the OpenSSL version.

Quoted 52 lines
Quoted 52 lines
configure.ac +3 -0
+
 #debug support - yes for a while
 PKG_ARG_ENABLE(debug, "yes", DEBUG, [Enable Debug support])
 if test $pkg_cv_enable_debug = yes; then
@@ -89,5 +102,7 @@ echo	"      tss2-esys: $ac_cv_lib_tss2_esys_Esys_Free"
 echo	" tss2-rc-decode: $ac_cv_lib_tss2_rc_Tss2_RC_Decode"
 echo    "         ibmtss: $ac_cv_header_ibmtss_tss_h"
 echo    "         sigv1:  $enable_sigv1"
+echo    "         engine: $enable_engine"
+echo    "            ssl: $ssl_version"
 echo	"            doc: $have_doc"
 echo
src/Makefile.am +8 -0
index 90c7249020cf..a810d6e0acff 100644
@@ -11,6 +11,10 @@ if CONFIG_SIGV1
 libimaevm_la_CFLAGS = -DCONFIG_SIGV1
 endif
 
+if CONFIG_ENGINE
+libimaevm_la_CFLAGS = -DCONFIG_ENGINE
+endif
+
 include_HEADERS = imaevm.h
 
 nodist_libimaevm_la_SOURCES = hash_info.h
@@ -31,6 +35,10 @@ if CONFIG_SIGV1
 evmctl_CFLAGS = -DCONFIG_SIGV1
 endif
 
+# Enable "--engine" support
+if CONFIG_ENGINE
+evmctl_CFLAGS = -DCONFIG_ENGINE
+endif
 
 # USE_PCRTSS uses the Intel TSS
 if USE_PCRTSS
src/evmctl.c +2 -0
index 490d355188d0..ad96789f1984 100644
@@ -64,7 +64,9 @@
 #include <openssl/hmac.h>
 #include <openssl/err.h>
 #include <openssl/rsa.h>
+#if CONFIG_ENGINE
 #include <openssl/engine.h>
+#endif
 #include <openssl/x509v3.h>
 #include "hash_info.h"
 #include "pcr.h"
Quoted 8 lines

src/evmctl.c static void usage(void) · line 2720

Quoted 6 lines
src/evmctl.c +1 -1
@@ -2715,7 +2717,7 @@ static void usage(void)
 		"      --selinux      use custom Selinux label for EVM\n"
 		"      --caps         use custom Capabilities for EVM(unspecified: from FS, empty: do not use)\n"
 		"      --verify-sig   verify measurement list signatures\n"
-		"      --engine e     preload OpenSSL engine e (such as: gost)\n"
+		"      --engine e     preload OpenSSL engine e (such as: gost) id deprecated\n"

Typo.

Thanks.

Quoted 103 lines
Quoted 103 lines
src/evmctl.c +12 -1
 		"      --ignore-violations ignore ToMToU measurement violations\n"
 		"  -v                 increase verbosity level\n"
 		"  -h, --help         display this help and exit\n"
@@ -2828,7 +2830,9 @@ static char *get_password(void)
 
 static ENGINE *setup_engine(const char *engine_id)
 {
+#if CONFIG_ENGINE
 	ENGINE *eng = ENGINE_by_id(engine_id);
+
 	if (!eng) {
 		log_err("engine %s isn't available\n", optarg);
 		ERR_print_errors_fp(stderr);
@@ -2841,6 +2845,9 @@ static ENGINE *setup_engine(const char *engine_id)
 	if (eng)
 		ENGINE_set_default(eng, ENGINE_METHOD_ALL);
 	return eng;
+#endif
+	log_err("OpenSSL 3 \"engine\" support is deprecated\n");
+	return NULL;
 }
 
 int main(int argc, char *argv[])
@@ -2969,8 +2976,12 @@ int main(int argc, char *argv[])
 			break;
 		case 139: /* --engine e */
 			imaevm_params.eng = setup_engine(optarg);
-			if (!imaevm_params.eng)
+			if (!imaevm_params.eng) {
+#ifndef CONFIG_ENGINE
+				err = 77; /* SKIP */
+#endif
 				goto error;
+			}
 			break;
 		case 140: /* --xattr-user */
 			xattr_ima = "user.ima";
@@ -3056,6 +3067,7 @@ int main(int argc, char *argv[])
 	}
 
 error:
+#if CONFIG_ENGINE
 	if (imaevm_params.eng) {
 		ENGINE_finish(imaevm_params.eng);
 		ENGINE_free(imaevm_params.eng);
@@ -3063,6 +3075,7 @@ error:
 		ENGINE_cleanup();
 #endif
 	}
+#endif
 	ERR_free_strings();
 	EVP_cleanup();
 	BIO_free(NULL);
src/imaevm.h +2 -0
index afcf1e042014..ebe8c20d566a 100644
@@ -48,7 +48,9 @@
 #include <errno.h>
 #include <sys/types.h>
 #include <openssl/rsa.h>
+#ifdef CONFIG_ENGINE
 #include <openssl/engine.h>
+#endif
 
 #ifdef USE_FPRINTF
 #define do_log(level, fmt, args...)	\
src/libimaevm.c +5 -0
index cb815f953a80..d81bdbb85250 100644
@@ -965,6 +965,7 @@ static EVP_PKEY *read_priv_pkey(const char *keyfile, const char *keypass)
 	EVP_PKEY *pkey;
 
 	if (!strncmp(keyfile, "pkcs11:", 7)) {
+#ifdef CONFIG_ENGINE
 		if (!imaevm_params.keyid) {
 			log_err("When using a pkcs11 URI you must provide the keyid with an option\n");
 			return NULL;
@@ -981,6 +982,10 @@ static EVP_PKEY *read_priv_pkey(const char *keyfile, const char *keypass)
 			log_err("Failed to load private key %s\n", keyfile);
 			goto err_engine;
 		}
+#else
+		log_err("OpenSSL 3 \"engine\" support is deprecated\n");
+		goto err_engine;
+#endif
 	} else {
 		fp = fopen(keyfile, "r");
 		if (!fp) {
tests/functions.sh +2 -1
index 8f6f02dfcd95..ddc8fe9e5ea6 100755
@@ -312,4 +312,13 @@ _softhsm_teardown() {
   rm -rf "${SOFTHSM_SETUP_CONFIGDIR}"
   unset SOFTHSM_SETUP_CONFIGDIR SOFTHSM2_CONF PKCS11_KEYURI \
     EVMCTL_ENGINE OPENSSL_ENGINE OPENSSL_KEYFORM
-}
\ No newline at end of file
+}
+
Quoted 8 lines

tests/functions.sh _softhsm_teardown() { · line 321

Quoted 5 lines
tests/functions.sh +5 -0
+# OpenSSL 3 engine support still works, but is deprecated. In preparation
+# for it being removed, a new ima-evm-utils configuration option
+# "--enable-engine" is defined.`
+_is_engine_supported() {
+  cmd="evmctl --engine pkcs11"

I think pkcs11 engine is optional (and could be in additional package) even if other engines are present.

We need to move away from OpenSSL engine support towards providers.

Quoted 3 lines

Also engine could be loaded via openssl.cnf/OPENSSL_CONF, in that case --engine option is not needed but engine is still there to use/test.

Thank you for reminding me that engine support based on the OpenSSL configuration also needs to be deprecated.

Quoted 18 lines
Quoted 18 lines
tests/functions.sh +3 -0
+  $cmd &>/dev/null
+  ENGINE_SUPPORTED=$?
+}
tests/ima_hash.test +5 -0
index e88fd59cc359..0de9e6808af9 100755
@@ -71,6 +71,15 @@ expect_pass check  sha384     0x0405 38b060a751ac96384cd9327eb1b1e36a21fdb71114b
 expect_pass check  sha512     0x0406 cf83e1357eefb8bdf1542850d66d8007d620e4050b5715dc83f4a921d36ce9ce47d0d13c5d85f2b0ff8318d2877eec2f63b931bd47417a81a538327af927da3e
 expect_pass check  rmd160     0x0403 9c1185a5c5e9fc54612808977ee8f548b2258d31
 expect_pass check  sm3        0x0411 1ab21d8355cfa17f8e61194831e81a8f22bec8c728fefb747ed035eb5082aa2b
+
+# Remaining tests require engine support
+_is_engine_supported
+if [ $ENGINE_SUPPORTED -eq 77 ]; then
+  __skip() { echo "Tests requiring engine support are skipped (not supported)"; return $SKIP; }
Quoted 8 lines

tests/ima_hash.test expect_pass check sha384 0x0405 38b060a751ac96384cd9327eb1b1e36a21fdb71114b · line 81

Quoted 3 lines
tests/ima_hash.test +3 -0
+  expect_pass __skip
+  exit 0
+fi

GOST tests try to handle absence of algorithms (can work w/o --engine option if configured via openssl config) and skip gracefully. Perhaps this check should be moved below them just for pkcs11 tests if they are so sensitive.

Does OpenSSL v3 differentiate how engines are configured? I assume when engine support is removed, all of it will be removed.

Quoted 37 lines

Thanks,

Quoted 34 lines
tests/ima_hash.test +1 -0
+
 _enable_gost_engine
 expect_pass check  md_gost12_256 0x0412 3f539a213e97c802cc229d474c6aa32a825a360b2a933a949fd925208d9ce1bb
 expect_pass check  streebog256   0x0412 3f539a213e97c802cc229d474c6aa32a825a360b2a933a949fd925208d9ce1bb
tests/sign_verify.test +10 -0
index 948892759424..8c005b741916 100755
@@ -18,6 +18,8 @@
 cd "$(dirname "$0")" || exit 1
 PATH=../src:$PATH
 SIGV1=0
+ENGINE_SUPPORTED=0
+
 source ./functions.sh
 
 _require cmp evmctl getfattr openssl xxd
@@ -418,6 +420,14 @@ if [ -x /opt/openssl3/bin/openssl ]; then
     sign_verify  sm2    sm3    0x030211:K:004[345678]
 fi
 
+# Remaining tests require engine support
+_is_engine_supported
+if [ $ENGINE_SUPPORTED -eq 77 ]; then
+  __skip() { echo "Tests requiring engine support are skipped (not supported)"; return $SKIP; }
+  expect_pass __skip
+  exit 0
+fi
+
 # Test v2 signatures with EC-RDSA
 _enable_gost_engine
 sign_verify  gost2012_256-A md_gost12_256 0x030212:K:0040
Signature · 1 line
2.31.1
#21 lore raw

Re: [RFC PATCH ima-evm-utils 08/11] Deprecate use of OpenSSL 3 "engine" support

Mimi,

Quoted 16 lines · Mimi Zohar
Quoted 15 lines · Vitaly Chikunov

Mimi,

Quoted 4 lines · Mimi Zohar

OpenSSL 3 "engine" support is deprecated, which results in deprecated build warning messages. In preparation for OpenSSL "engine" support to be removed, define a "--enable-engine" configuration option. If not specified, disable engine support on systems with OpenSSL v3.

This seems to change default behavior.

Many distributions (AFAIK) still contain openssl1, and some contain both openssl1 and openssl3, including devel packages. So they will suddenly drop --engine support on ima-evm-utils update, even though their OpenSSL supports it.

Quoted 7 lines
Quoted 2 lines

Maybe --disable-engine should be added instead if user wants to avoid compile time deprecation warnings?

No, engine support is not disabled for previous versions of OpenSSL. It's only disabled for OpenSSL v3, with the --enable-engine option allowing it to be configured. The "-Wno-deprecated-declarations" option could even be added.

IC, but many distributions switched to openssl3 - engine support will suddenly disappear for them if they aren't attentive enough.

OpenSSL can be compiled w/o engine support, I think engine support in evmctl should depend on that and not on ima-evm-utils configure option. If distribution wants to disable engine support they will disable it in OpenSSL and it will be disabled in ima-evm-utils as consequence. Or at least this should be default behavior, and to deviate from it additional --disable-engine option in ima-evm-utils.

Quoted 7 lines
Quoted 3 lines

(Also, engines aren't just deprecated, they are deprecated in favor of providers.)

Right. At some point, OpenSSL engine support will be removed. This
is a first step to removing it in ima-evm-utils. I searched but didn't
find any gost providers. Feel free to add it.

gost-engine already compiles to a provider:
https://github.com/gost-engine/engine#provider

Quoted 21 lines
Quoted 12 lines
Quoted 12 lines
tests/functions.sh +2 -1
index 8f6f02dfcd95..ddc8fe9e5ea6 100755
@@ -312,4 +312,13 @@ _softhsm_teardown() {
   rm -rf "${SOFTHSM_SETUP_CONFIGDIR}"
   unset SOFTHSM_SETUP_CONFIGDIR SOFTHSM2_CONF PKCS11_KEYURI \
     EVMCTL_ENGINE OPENSSL_ENGINE OPENSSL_KEYFORM
-}
\ No newline at end of file
+}
+
Quoted 8 lines

tests/functions.sh _softhsm_teardown() { · line 321

Quoted 5 lines
tests/functions.sh +5 -0
+# OpenSSL 3 engine support still works, but is deprecated. In preparation
+# for it being removed, a new ima-evm-utils configuration option
+# "--enable-engine" is defined.`
+_is_engine_supported() {
+  cmd="evmctl --engine pkcs11"

I think pkcs11 engine is optional (and could be in additional package) even if other engines are present.

Quoted 1 line

We need to move away from OpenSSL engine support towards providers.

Perhaps they will remove engines (it's not certain) in openssl4, but how many years will pass before that? I don't see why we should hurry in that.

Quoted 7 lines
Quoted 4 lines

Also engine could be loaded via openssl.cnf/OPENSSL_CONF, in that case --engine option is not needed but engine is still there to use/test.

Thank you for reminding me that engine support based on the OpenSSL configuration also needs to be deprecated.

I'm curious - how would you deprecate that? As this should be transparent to the libcrypto clients - new functionality and algorithms just appear.

Quoted 28 lines
Quoted 19 lines
Quoted 19 lines
tests/functions.sh +3 -0
+  $cmd &>/dev/null
+  ENGINE_SUPPORTED=$?
+}
tests/ima_hash.test +5 -0
index e88fd59cc359..0de9e6808af9 100755
@@ -71,6 +71,15 @@ expect_pass check  sha384     0x0405 38b060a751ac96384cd9327eb1b1e36a21fdb71114b
 expect_pass check  sha512     0x0406 cf83e1357eefb8bdf1542850d66d8007d620e4050b5715dc83f4a921d36ce9ce47d0d13c5d85f2b0ff8318d2877eec2f63b931bd47417a81a538327af927da3e
 expect_pass check  rmd160     0x0403 9c1185a5c5e9fc54612808977ee8f548b2258d31
 expect_pass check  sm3        0x0411 1ab21d8355cfa17f8e61194831e81a8f22bec8c728fefb747ed035eb5082aa2b
+
+# Remaining tests require engine support
+_is_engine_supported
+if [ $ENGINE_SUPPORTED -eq 77 ]; then
+  __skip() { echo "Tests requiring engine support are skipped (not supported)"; return $SKIP; }
Quoted 8 lines

tests/ima_hash.test expect_pass check sha384 0x0405 38b060a751ac96384cd9327eb1b1e36a21fdb71114b · line 81

Quoted 3 lines
tests/ima_hash.test +3 -0
+  expect_pass __skip
+  exit 0
+fi

GOST tests try to handle absence of algorithms (can work w/o --engine option if configured via openssl config) and skip gracefully. Perhaps this check should be moved below them just for pkcs11 tests if they are so sensitive.

Quoted 2 lines

Does OpenSSL v3 differentiate how engines are configured? I assume when engine support is removed, all of it will be removed.

Perhaps. But providers are configured similarly via config - there config examples for some gost-engine Perl tests:
as engine https://github.com/gost-engine/engine/blob/master/test/engine.cnf
as provider https://github.com/gost-engine/engine/blob/master/test/provider.cnf

Thanks,

#22 lore raw

Re: [RFC PATCH ima-evm-utils 08/11] Deprecate use of OpenSSL 3 "engine" support

Mimi,

Quoted 7 lines · Vitaly Chikunov
Quoted 2 lines · Mimi Zohar

On Tue, 2022-08-30 at 06:03 +0300, Vitaly Chikunov wrote:
We need to move away from OpenSSL engine support towards providers.

Perhaps they will remove engines (it's not certain) in openssl4, but how many years will pass before that? I don't see why we should hurry in that.

https://www.openssl.org/policies/releasestrat.html
Version 3.0 will be supported until 2026-09-07 (LTS).

So all that time there will be engines support, even if they decide to remove it in next major release. So it doesn't look like we need to delete it ASAP.

Thanks,

author maintainer
#23 lore raw

Re: [RFC PATCH ima-evm-utils 08/11] Deprecate use of OpenSSL 3 "engine" support

Hi Vitaly,

Quoted 11 lines · Vitaly Chikunov

Mimi,

Quoted 7 lines · Vitaly Chikunov
Quoted 2 lines · Mimi Zohar

On Tue, 2022-08-30 at 06:03 +0300, Vitaly Chikunov wrote:
We need to move away from OpenSSL engine support towards providers.

Perhaps they will remove engines (it's not certain) in openssl4, but how many years will pass before that? I don't see why we should hurry in that.

Quoted 6 lines

https://www.openssl.org/policies/releasestrat.html
Version 3.0 will be supported until 2026-09-07 (LTS).

So all that time there will be engines support, even if they decide to remove it in next major release. So it doesn't look like we need to delete it ASAP.

Agreed there is no rush. The original intent of this patch set, however, was to address as many deprecated warnings as possible without
turning them off. Once they're turned off, they're out of sight, out
of mind. The only remaining deprecated warnings, without this patch, are the engine related ones.

The two alternatives both require disabling deprecated warnings:
- invert "--enable-engine" to "--disable-engine" and disable the deprecated warnings.
- drop this patch and turn off the deprecated warnings, if compiled with OpenSSL v3.

Mimi

author maintainer
#24 lore raw

Re: [RFC PATCH ima-evm-utils 08/11] Deprecate use of OpenSSL 3 "engine" support

In reply to Vitaly Chikunov
Quoted 9 lines · Vitaly Chikunov
Quoted 5 lines
Quoted 2 lines

Also engine could be loaded via openssl.cnf/OPENSSL_CONF, in that case --engine option is not needed but engine is still there to use/test.

Thank you for reminding me that engine support based on the OpenSSL configuration also needs to be deprecated.

I'm curious - how would you deprecate that? As this should be transparent to the libcrypto clients - new functionality and algorithms just appear.

I'm referring to commit 782224f33cd7 ("ima-evm-utils: Rework openssl init"), which introduced "--disable-openssl-conf".

Quoted 6 lines
Quoted 6 lines
Quoted 5 lines

GOST tests try to handle absence of algorithms (can work w/o --engine option if configured via openssl config) and skip gracefully. Perhaps this check should be moved below them just for pkcs11 tests if they are so sensitive.

Quoted 7 lines
Quoted 2 lines

Does OpenSSL v3 differentiate how engines are configured? I assume when engine support is removed, all of it will be removed.

Perhaps. But providers are configured similarly via config - there config examples for some gost-engine Perl tests:
as engine https://github.com/gost-engine/engine/blob/master/test/engine.cnf
as provider https://github.com/gost-engine/engine/blob/master/test/provider.cnf

Ok. Thank you for the reference.

Mimi

author maintainer
#25 lore raw

RFC PATCH 9/11 Fix potential use after free in read_tpm_banks()

In reply to Mimi Zohar

On failure to read TPM 2.0 bank PCRs 'errmsg' is not properly set to NULL after being freed. Fix potential use after free.

Fixes 3472f9ba9c05 ("ima-evm-utils: read the PCRs for the requested TPM banks")
---
 src/evmctl.c | 1 +
 1 file changed, 1 insertion(+)
src/evmctl.c +1 -0
index ad96789f1984..4bdc62d2e2e4 100644
@@ -2076,6 +2076,7 @@ static int read_tpm_banks(int num_banks, struct tpm_bank_info *bank)
 				log_debug("Failed to read %s PCRs: (%s)\n",
 					  bank[i].algo_name, errmsg);
 				free(errmsg);
+				errmsg = NULL;
 				bank[i].supported = 0;
 			}
 		}
Signature · 1 line
2.31.1
author maintainer
#27 lore raw

RFC PATCH 10/11 Limit the file hash algorithm name length

In reply to Mimi Zohar

Instead of assuming the file hash algorithm is a properly NULL terminated string, properly limit the "algo:<hash>" field size.

---
 src/evmctl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
src/evmctl.c +1 -1
index 4bdc62d2e2e4..4619bb433926 100644
@@ -1603,7 +1603,7 @@ void ima_ng_show(struct template_entry *entry)
 	total_len -= sizeof(field_len);
 
 	algo = (char *)fieldp;
-	len = strlen(algo) + 1;
+	len = strnlen(algo, field_len - 1) + 1;
 	digest_len = field_len - len;
 	digest = fieldp + len;
 
Signature · 1 line
2.31.1
author maintainer
#29 lore raw

RFC PATCH 11/11 Missing template data size lower bounds checking

In reply to Mimi Zohar

Each record in the IMA measurement list must contain some template data. Ensure the template data is not zero length.

---
 src/evmctl.c | 4 ++++
 1 file changed, 4 insertions(+)
src/evmctl.c +4 -0
index 4619bb433926..0d8f93bf5d26 100644
@@ -2189,6 +2189,10 @@ static int ima_measurement(const char *file)
 				log_err("Unable to read template length\n");
 				goto out;
 			}
+			if (entry.template_len == 0) {
+				log_err("Invalid template data len\n");
+				goto out;
+			}
 		} else {
 			entry.template_len = SHA_DIGEST_LENGTH +
 					     TCG_EVENT_NAME_LEN_MAX + 1;
Signature · 1 line
2.31.1
Reviewed-by on v1 11/11
#30 lore raw

Re: [RFC PATCH ima-evm-utils 11/11] Missing template data size lower bounds checking

Hi Mimi,

Quoted 2 lines

Each record in the IMA measurement list must contain some template data. Ensure the template data is not zero length.

Kind regards,
Petr