Skip to contentSkip to conversation

verdin-imx8mm: verdin-imx8mp: various additions and improvements

PATCH New Marcel Ziswiler 2 participants 7 messages Sep 22, 2022 – Oct 24, 2022 Arm i.MX and Layerscape

lore
Share & tools
lore
#0 lore raw

v3 cover verdin-imx8mm: verdin-imx8mp: various additions and improvements

From: Marcel Ziswiler <[email protected]>

Various additions and improvements for the Verdin iMX8M Mini and Verdin iMX8M Plus:

- updated env memory layout
- verdin-imx8mm: prepare for optional job ring driver model (already applied)
- verdin-imx8mm: improve and extend boot devices (already applied)
- various config additions and improvements

Changes in v3:
- Moved loadaddr back by 0.5MB as I meanwhile found out that it is
actually a property of the kernel binary whether or not any additional moving/relocation will (need) to be done. However, a pre-maturely
applied v2 did not take that into account as of yet [1].
[1] https://patchwork.ozlabs.org/project/uboot/cover/[email protected]/#2953792
- Drop SNVS_LP general purpose register LPGPR0 based bootcount
integration in favour of using the environment based one as that is
what our update system uses.
- Update patch 1 again after wrong version got pre-maturely epplied.
- Drop patches 2 and 3 which already got applied.
- Drop SNVS_LP general purpose register LPGPR0 based bootcount
integration in favour of using the environment based one as that is
what our update system uses.

Changes in v2:
- Moved loadaddr by an additional 0.5MB to avoid "Moving Image from 0x48200000 to 0x48280000" during booti plus increasing kernel_comp_size by same 0.5MB.

Marcel Ziswiler (3):
verdin-imx8mm: verdin-imx8mp: update env memory layout (again)
verdin-imx8mm: various config additions and improvements
verdin-imx8mp: various config additions and improvements

 configs/verdin-imx8mm_defconfig |  7 ++-----
 configs/verdin-imx8mp_defconfig | 30 ++++++++++++++++++++++++++----
 include/configs/verdin-imx8mm.h |  2 +-
 include/configs/verdin-imx8mp.h |  2 +-
 4 files changed, 30 insertions(+), 11 deletions(-)
Signature · 1 line
2.35.1
#1 lore raw

PATCH v3 1/3 verdin-imx8mm: verdin-imx8mp: update env memory layout (again)

From: Marcel Ziswiler <[email protected]>

Update the distro config env memory layout for the Verdin iMX8M Mini and Verdin iMX8M Plus again:

- loadaddr=0x48200000 allows for 128MB area for uncompressing (ie FIT images, kernel_comp_addr_r, kernel_comp_size)
- fdt_addr_r = loadaddr + 128MB - allows for 128MB kernel
- scriptaddr = fdt_addr_r + 512KB - allows for 512KB fdt
- ramdisk_addr_r = scriptaddr + 512KB - allows for 512KB script

Memory layout taken from commit fd5c7173ade4
("imx8m{m,n}_venice: update env memory layout").

Note that for our regular BSP Layers and Reference Images for Yocto Project an updated distro boot script is required (see meta-toradex-bsp-common/recipes-bsp/u-boot/u-boot-distro-boot).

Note that this corrects a pre-maturely applied version 2 of the same patch set.

Fixes bbe0089d29e ("verdin-imx8mm: verdin-imx8mp: update env memory layout")

---

Changes in v3:
- Moved loadaddr back by 0.5MB as I meanwhile found out that it is
actually a property of the kernel binary whether or not any additional moving/relocation will (need) to be done. However, a pre-maturely
applied v2 did not take that into account as of yet [1].
[1] https://patchwork.ozlabs.org/project/uboot/cover/[email protected]/#2953792

Changes in v2:
- Moved loadaddr by an additional 0.5MB to avoid "Moving Image from 0x48200000 to 0x48280000" during booti plus increasing kernel_comp_size by same 0.5MB.

 configs/verdin-imx8mm_defconfig | 2 +-
 configs/verdin-imx8mp_defconfig | 2 +-
 include/configs/verdin-imx8mm.h | 2 +-
 include/configs/verdin-imx8mp.h | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)
configs/verdin-imx8mm_defconfig +1 -1
index f65b4a7f307..9b9b684ccbc 100644
@@ -19,7 +19,7 @@ CONFIG_BOOTCOUNT_BOOTLIMIT=3
 CONFIG_SYS_BOOTCOUNT_ADDR=0x30370090
 CONFIG_SPL=y
 CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
-CONFIG_SYS_LOAD_ADDR=0x48280000
+CONFIG_SYS_LOAD_ADDR=0x48200000
 CONFIG_SYS_MEMTEST_START=0x40000000
 CONFIG_SYS_MEMTEST_END=0x80000000
 CONFIG_LTO=y
configs/verdin-imx8mp_defconfig +1 -1
index 5d0c57c52e4..071a2223d41 100644
@@ -22,7 +22,7 @@ CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL=y
 CONFIG_IMX_BOOTAUX=y
 CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
-CONFIG_SYS_LOAD_ADDR=0x48280000
+CONFIG_SYS_LOAD_ADDR=0x48200000
 CONFIG_SYS_MEMTEST_START=0x40000000
 CONFIG_SYS_MEMTEST_END=0x80000000
 CONFIG_DISTRO_DEFAULTS=y
include/configs/verdin-imx8mm.h +1 -1
index 4d20b86591f..ec893763215 100644
@@ -23,7 +23,7 @@
 	"fdt_addr_r=0x50200000\0" \
 	"kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
 	"kernel_comp_addr_r=0x40200000\0" \
-	"kernel_comp_size=0x08080000\0" \
+	"kernel_comp_size=0x08000000\0" \
 	"ramdisk_addr_r=0x50300000\0" \
 	"scriptaddr=0x50280000\0"
 
include/configs/verdin-imx8mp.h +1 -1
index 9b8db223bb2..959c15f598e 100644
@@ -37,7 +37,7 @@
 	"fdt_addr_r=0x50200000\0" \
 	"kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
 	"kernel_comp_addr_r=0x40200000\0" \
-	"kernel_comp_size=0x08080000\0" \
+	"kernel_comp_size=0x08000000\0" \
 	"ramdisk_addr_r=0x50300000\0" \
 	"scriptaddr=0x50280000\0"
 
Signature · 1 line
2.35.1
#2 lore raw

PATCH v3 1/3 verdin-imx8mm: verdin-imx8mp: update env memory layout (again)

Quoted 15 lines

From: Marcel Ziswiler <[email protected]>
Update the distro config env memory layout for the Verdin iMX8M Mini and Verdin iMX8M Plus again:
- loadaddr=0x48200000 allows for 128MB area for uncompressing (ie FIT images, kernel_comp_addr_r, kernel_comp_size)
- fdt_addr_r = loadaddr + 128MB - allows for 128MB kernel
- scriptaddr = fdt_addr_r + 512KB - allows for 512KB fdt
- ramdisk_addr_r = scriptaddr + 512KB - allows for 512KB script Memory layout taken from commit fd5c7173ade4 ("imx8m{m,n}_venice: update env memory layout").
Note that for our regular BSP Layers and Reference Images for Yocto Project an updated distro boot script is required (see meta-toradex-bsp-common/recipes-bsp/u-boot/u-boot-distro-boot). Note that this corrects a pre-maturely applied version 2 of the same patch set.

Quoted 2 lines
Fixes bbe0089d29e ("verdin-imx8mm: verdin-imx8mp: update env memory layout")

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================
#3 lore raw

PATCH v3 2/3 verdin-imx8mm: various config additions and improvements

In reply to Marcel Ziswiler

From: Marcel Ziswiler <[email protected]>

- enable bootcount command
- integrate bootcount using SNVS_LP general purpose register LPGPR0
- enable link-time optimisation
- explicitly set a boot delay of one second
- enable CRC32 and MD5
- enable command for low-level access to data in a partition
- enable time commands
- enable PMIC commands
- improve ETHPRIME configuration
- enable eMMC HS400 functionality
- enable fixed PHY and MDIO driver model
- remove stale PFUZE100 PMIC driver
- enable thermal management unit driver
- enable more USB host functionality
- enable hexdump

---

Changes in v3:
- Drop SNVS_LP general purpose register LPGPR0 based bootcount integration in favour of using the environment based one as that is what our update system uses.

 configs/verdin-imx8mm_defconfig | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)
configs/verdin-imx8mm_defconfig +1 -4
index 9b9b684ccbc..25cd59b185e 100644
@@ -15,10 +15,7 @@ CONFIG_SYS_PROMPT="Verdin iMX8MM # "
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
-CONFIG_BOOTCOUNT_BOOTLIMIT=3
-CONFIG_SYS_BOOTCOUNT_ADDR=0x30370090
 CONFIG_SPL=y
-CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
 CONFIG_SYS_LOAD_ADDR=0x48200000
 CONFIG_SYS_MEMTEST_START=0x40000000
 CONFIG_SYS_MEMTEST_END=0x80000000
@@ -92,7 +89,7 @@ CONFIG_IP_DEFRAG=y
 CONFIG_TFTP_BLOCKSIZE=4096
 CONFIG_SPL_DM=y
 CONFIG_BOOTCOUNT_LIMIT=y
-CONFIG_SYS_BOOTCOUNT_MAGIC=0xB0C40000
+CONFIG_BOOTCOUNT_ENV=y
 CONFIG_SPL_CLK_COMPOSITE_CCF=y
 CONFIG_CLK_COMPOSITE_CCF=y
 CONFIG_SPL_CLK_IMX8MM=y
Signature · 1 line
2.35.1
#4 lore raw

PATCH v3 2/3 verdin-imx8mm: various config additions and improvements

Quoted 16 lines

From: Marcel Ziswiler <[email protected]>
- enable bootcount command
- integrate bootcount using SNVS_LP general purpose register LPGPR0
- enable link-time optimisation
- explicitly set a boot delay of one second
- enable CRC32 and MD5
- enable command for low-level access to data in a partition
- enable time commands
- enable PMIC commands
- improve ETHPRIME configuration
- enable eMMC HS400 functionality
- enable fixed PHY and MDIO driver model
- remove stale PFUZE100 PMIC driver
- enable thermal management unit driver
- enable more USB host functionality
- enable hexdump

Quoted 1 line

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================
#5 lore raw

PATCH v3 3/3 verdin-imx8mp: various config additions and improvements

In reply to Marcel Ziswiler

From: Marcel Ziswiler <[email protected]>

- enable bootcount command
- enable CRC32 and MD5
- enable time commands
- enable GPIO LED support
- enable further eMMC HS400 functionality
- enable fixed PHY and MDIO driver model
- enable USB host functionality
- enable thermal management unit driver
- enable hexdump

---

Changes in v3:
- Update patch 1 again after wrong version got pre-maturely epplied.
- Drop patches 2 and 3 which already got applied.
- Drop SNVS_LP general purpose register LPGPR0 based bootcount integration in favour of using the environment based one as that is what our update system uses.

 configs/verdin-imx8mp_defconfig | 28 +++++++++++++++++++++++++---
 1 file changed, 25 insertions(+), 3 deletions(-)
configs/verdin-imx8mp_defconfig +25 -3
index 071a2223d41..c476b734573 100644
@@ -65,7 +65,9 @@ CONFIG_SYS_PBSIZE=2081
 # CONFIG_BOOTM_NETBSD is not set
 CONFIG_CMD_ASKENV=y
 # CONFIG_CMD_EXPORTENV is not set
-# CONFIG_CMD_CRC32 is not set
+CONFIG_CRC32_VERIFY=y
+CONFIG_CMD_MD5SUM=y
+CONFIG_MD5SUM_VERIFY=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_CLK=y
 CONFIG_CMD_FUSE=y
@@ -74,12 +76,14 @@ CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_READ=y
 CONFIG_CMD_USB=y
+CONFIG_CMD_BOOTCOUNT=y
 CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
 CONFIG_CMD_UUID=y
 CONFIG_CMD_REGULATOR=y
 CONFIG_CMD_EXT4_WRITE=y
 # CONFIG_ISO_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
@@ -106,29 +110,38 @@ CONFIG_DM_PCA953X=y
 CONFIG_DM_I2C=y
 # CONFIG_SPL_DM_I2C is not set
 CONFIG_SPL_SYS_I2C_LEGACY=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
 CONFIG_MISC=y
 CONFIG_I2C_EEPROM=y
 CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_SPL_MMC_IO_VOLTAGE=y
 CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_SPL_MMC_UHS_SUPPORT=y
 CONFIG_MMC_HS400_ES_SUPPORT=y
 CONFIG_MMC_HS400_SUPPORT=y
+CONFIG_SPL_MMC_HS400_SUPPORT=y
 CONFIG_FSL_USDHC=y
 CONFIG_PHY_ADDR_ENABLE=y
 CONFIG_PHY_MICREL=y
 CONFIG_PHY_MICREL_KSZ90X1=y
+CONFIG_PHY_FIXED=y
+CONFIG_DM_MDIO=y
 CONFIG_DM_ETH_PHY=y
 CONFIG_DWC_ETH_QOS=y
 CONFIG_DWC_ETH_QOS_IMX=y
 CONFIG_FEC_MXC=y
 CONFIG_RGMII=y
 CONFIG_MII=y
+CONFIG_PHY_IMX8MQ_USB=y
 CONFIG_PINCTRL=y
 CONFIG_SPL_PINCTRL=y
 CONFIG_PINCTRL_IMX8M=y
 CONFIG_SPL_POWER_LEGACY=y
 CONFIG_POWER_DOMAIN=y
 CONFIG_IMX8M_POWER_DOMAIN=y
+CONFIG_IMX8MP_HSIOMIX_BLKCTRL=y
 CONFIG_DM_REGULATOR=y
 CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_DM_REGULATOR_GPIO=y
@@ -140,8 +153,17 @@ CONFIG_SPL_SYSRESET=y
 CONFIG_SYSRESET_PSCI=y
 CONFIG_SYSRESET_WATCHDOG=y
 CONFIG_DM_THERMAL=y
+CONFIG_IMX_TMU=y
 CONFIG_USB=y
-# CONFIG_SPL_DM_USB is not set
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_XHCI_DWC3_OF_SIMPLE=y
 CONFIG_USB_EHCI_HCD=y
+CONFIG_MXC_USB_OTG_HACTIVE=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
+CONFIG_USB_KEYBOARD=y
+CONFIG_USB_HOST_ETHER=y
 CONFIG_IMX_WATCHDOG=y
+CONFIG_HEXDUMP=y
 CONFIG_OF_LIBFDT_OVERLAY=y
Signature · 1 line
2.35.1
#6 lore raw

PATCH v3 3/3 verdin-imx8mp: various config additions and improvements

Quoted 11 lines

From: Marcel Ziswiler <[email protected]>
- enable bootcount command
- enable CRC32 and MD5
- enable time commands
- enable GPIO LED support
- enable further eMMC HS400 functionality
- enable fixed PHY and MDIO driver model
- enable USB host functionality
- enable thermal management unit driver
- enable hexdump

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================