4.19.260-rc1 review
Subsystems (4)
Greg Kroah-Hartman
maintainercover 4.19.260-rc1 review
This is the start of the stable review cycle for the 4.19.260 release. There are 58 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 28 Sep 2022 10:07:26 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.260-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.19.260-rc1
Raymond Tan <[email protected]>
usb: dwc3: pci: Allow Elkhart Lake to utilize DSM method for PM functionality
Jan Kara <[email protected]>
ext4: make directory inode spreading reflect flexbg size
Tetsuo Handa <[email protected]>
workqueue: don't skip lockdep work dependency in cancel_work_sync()
Nathan Huckleberry <[email protected]>
drm/rockchip: Fix return type of cdn_dp_connector_mode_valid
Yao Wang1 <[email protected]>
drm/amd/display: Limit user regamma to a valid value
Vitaly Kuznetsov <[email protected]>
Drivers: hv: Never allocate anything besides framebuffer from framebuffer memory region
Stefan Haberland <[email protected]>
s390/dasd: fix Oops in dasd_alias_get_start_dev due to missing pavgroup
Ilpo Järvinen <[email protected]>
serial: tegra: Use uart_xmit_advance(), fixes icount.tx accounting
Ilpo Järvinen <[email protected]>
serial: Create uart_xmit_advance()
Sean Anderson <[email protected]>
net: sunhme: Fix packet reception for len < RX_COPY_THRESHOLD
Adrian Hunter <[email protected]>
perf kcore_copy: Do not check /proc/modules is unchanged
Lieven Hey <[email protected]>
perf jit: Include program header in ELF files
Marc Kleine-Budde <[email protected]>
can: gs_usb: gs_can_open(): fix race dev->can.state condition
Florian Westphal <[email protected]>
netfilter: ebtables: fix memory leak when blob is malformed
Liang He <[email protected]>
of: mdio: Add of_node_put() when breaking out of for_each_xx
Michal Jaron <[email protected]>
i40e: Fix set max_tx_rate when it is lower than 1 Mbps
Michal Jaron <[email protected]>
i40e: Fix VF set max MTU size
Randy Dunlap <[email protected]>
MIPS: lantiq: export clk_get_io() for lantiq_wdt.ko
Benjamin Poirier <[email protected]>
net: team: Unsync device addresses on ndo_stop
Lu Wei <[email protected]>
ipvlan: Fix out-of-bound bugs caused by unset skb->mac_header
Brett Creeley <[email protected]>
iavf: Fix cached head and tail value for iavf_get_tx_pending
David Leadbeater <[email protected]>
netfilter: nf_conntrack_irc: Tighten matching on DCC message
Igor Ryzhov <[email protected]>
netfilter: nf_conntrack_sip: fix ct_sip_walk_headers
Fabio Estevam <[email protected]>
arm64: dts: rockchip: Remove 'enable-active-low' from rk3399-puma
zain wang <[email protected]>
arm64: dts: rockchip: Set RK3399-Gru PCLK_EDP to 24 MHz
Chao Yu <[email protected]>
mm/slub: fix to return errno if kmalloc() fails
Al Viro <[email protected]>
riscv: fix a nasty sigreturn bug...
Ard Biesheuvel <[email protected]>
efi: libstub: check Shim mode using MokSBStateRT
Callum Osmotherly <[email protected]>
ALSA: hda/realtek: Enable 4-speaker output Dell Precision 5530 laptop
Kai Vehmanen <[email protected]>
ALSA: hda: add Intel 5 Series / 3400 PCI DID
Mohan Kumar <[email protected]>
ALSA: hda/tegra: set depop delay for tegra
jerry meng <[email protected]>
USB: serial: option: add Quectel RM520N
Carl Yin(殷张成) <[email protected]>
USB: serial: option: add Quectel BG95 0x0203 composition
Alan Stern <[email protected]>
USB: core: Fix RST error in hub.c
Siddh Raman Pant <[email protected]>
wifi: mac80211: Fix UAF in ieee80211_scan_rx()
Heikki Krogerus <[email protected]>
usb: dwc3: pci: add support for the Intel Alder Lake-S
Heikki Krogerus <[email protected]>
usb: dwc3: pci: add support for the Intel Jasper Lake
Heikki Krogerus <[email protected]>
usb: dwc3: pci: add support for the Intel Tiger Lake PCH -H variant
Felipe Balbi <[email protected]>
usb: dwc3: pci: add support for TigerLake Devices
Felipe Balbi <[email protected]>
usb: dwc3: pci: Add Support for Intel Elkhart Lake Devices
Takashi Iwai <[email protected]>
ALSA: hda/sigmatel: Fix unused variable warning for beep power change
Hyunwoo Kim <[email protected]>
video: fbdev: pxa3xx-gcu: Fix integer overflow in pxa3xx_gcu_write
Youling Tang <[email protected]>
mksysmap: Fix the mismatch of 'L0' symbols in System.map
Alexander Sverdlin <[email protected]>
MIPS: OCTEON: irq: Fix octeon_irq_force_ciu_mapping()
jerry.meng <[email protected]>
net: usb: qmi_wwan: add Quectel RM520N
Takashi Iwai <[email protected]>
ALSA: hda/sigmatel: Keep power up while beep is enabled
David Howells <[email protected]>
rxrpc: Fix local destruction being repeated
Xiaolei Wang <[email protected]>
regulator: pfuze100: Fix the global-out-of-bounds access in pfuze100_regulator_probe()
Takashi Iwai <[email protected]>
ASoC: nau8824: Fix semaphore unbalance at error paths
Stefan Metzmacher <[email protected]>
cifs: don't send down the destination address to sendmsg for a SOCK_STREAM
Greg Kroah-Hartman <[email protected]>
mvpp2: no need to check return value of debugfs_create functions
Bart Van Assche <[email protected]>
nvmet: fix a use-after-free
Ard Biesheuvel <[email protected]>
efi: libstub: Disable struct randomization
Sami Tolvanen <[email protected]>
efi/libstub: Disable Shadow Call Stack
Yang Yingliang <[email protected]>
parisc: ccio-dma: Add missing iounmap in error path in ccio_probe()
Stuart Menefy <[email protected]>
drm/meson: Correct OSD1 global alpha value
Pali Rohár <[email protected]>
gpio: mpc8xxx: Fix support for IRQ_TYPE_LEVEL_LOW flow_type in mpc85xx
Sergey Shtylyov <[email protected]>
of: fdt: fix off-by-one error in unflatten_dt_nodes()
-------------
Diffstat:
Makefile | 4 +-- .../boot/dts/rockchip/rk3399-gru-chromebook.dtsi | 8 +++++ arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 1 - arch/mips/cavium-octeon/octeon-irq.c | 10 +++++++ arch/mips/lantiq/clk.c | 1 + arch/riscv/kernel/signal.c | 2 ++ drivers/firmware/efi/libstub/Makefile | 10 +++++++ drivers/firmware/efi/libstub/secureboot.c | 8 ++--- drivers/gpio/gpio-mpc8xxx.c | 1 + .../drm/amd/display/modules/color/color_gamma.c | 4 +++ drivers/gpu/drm/meson/meson_plane.c | 2 +- drivers/gpu/drm/rockchip/cdn-dp-core.c | 5 ++-- drivers/hv/vmbus_drv.c | 10 ++++++- drivers/net/can/usb/gs_usb.c | 4 +-- drivers/net/ethernet/intel/i40e/i40e_main.c | 32 ++++++++++++++++---- drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 20 +++++++++++++ drivers/net/ethernet/intel/i40evf/i40e_txrx.c | 5 +++- drivers/net/ethernet/marvell/mvpp2/mvpp2_debugfs.c | 19 +----------- drivers/net/ethernet/sun/sunhme.c | 4 +-- drivers/net/ipvlan/ipvlan_core.c | 6 ++-- drivers/net/team/team.c | 24 +++++++++++---- drivers/net/usb/qmi_wwan.c | 1 + drivers/nvme/target/core.c | 5 ++-- drivers/of/fdt.c | 2 +- drivers/of/of_mdio.c | 1 + drivers/parisc/ccio-dma.c | 1 + drivers/regulator/pfuze100-regulator.c | 2 +- drivers/s390/block/dasd_alias.c | 9 ++++-- drivers/tty/serial/serial-tegra.c | 5 ++-- drivers/usb/core/hub.c | 2 +- drivers/usb/dwc3/dwc3-pci.c | 23 ++++++++++++++- drivers/usb/serial/option.c | 6 ++++ drivers/video/fbdev/pxa3xx-gcu.c | 2 +- fs/cifs/transport.c | 4 +-- fs/ext4/ialloc.c | 2 +- include/linux/serial_core.h | 17 +++++++++++ kernel/workqueue.c | 6 ++-- mm/slub.c | 5 +++- net/bridge/netfilter/ebtables.c | 4 ++- net/mac80211/scan.c | 11 ++++--- net/netfilter/nf_conntrack_irc.c | 34 ++++++++++++++++++---- net/netfilter/nf_conntrack_sip.c | 4 +-- net/rxrpc/local_object.c | 3 ++ scripts/mksysmap | 2 +- sound/pci/hda/hda_intel.c | 2 ++ sound/pci/hda/patch_hdmi.c | 1 + sound/pci/hda/patch_realtek.c | 1 + sound/pci/hda/patch_sigmatel.c | 24 +++++++++++++++ sound/soc/codecs/nau8824.c | 17 ++++++----- tools/perf/util/genelf.c | 14 +++++++++ tools/perf/util/genelf.h | 4 +++ tools/perf/util/symbol-elf.c | 7 ++--- 52 files changed, 307 insertions(+), 94 deletions(-)
Greg Kroah-Hartman
maintainerPATCH 1/58 of: fdt: fix off-by-one error in unflatten_dt_nodes()
From: Sergey Shtylyov <[email protected]>
[ Upstream commit 2f945a792f67815abca26fa8a5e863ccf3fa1181 ]
Commit 78c44d910d3e ("drivers/of: Fix depth when unflattening devicetree") forgot to fix up the depth check in the loop body in unflatten_dt_nodes() which makes it possible to overflow the nps[] buffer...
Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool.
--- drivers/of/fdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/of/fdt.c +1 -1
@@ -392,7 +392,7 @@ static int unflatten_dt_nodes(const void *blob,for (offset =0 ; offset >=0 && depth >= initial_depth; offset =fdt_next_node (blob, offset, &depth)) { -if (WARN_ON_ONCE (depth >=FDT_MAX_DEPTH )) +if (WARN_ON_ONCE (depth >=FDT_MAX_DEPTH -1 ))continue ; if (!IS_ENABLED(CONFIG_OF_KOBJ) &&
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 2/58 gpio: mpc8xxx: Fix support for IRQ_TYPE_LEVEL_LOW flow_type in mpc85xx
In reply to Greg Kroah-HartmanFrom: Pali Rohár <[email protected]>
[ Upstream commit 279c12df8d2efb28def9d037f288cbfb97c30fe2 ]
Commit e39d5ef67804 ("powerpc/5xxx: extend mpc8xxx_gpio driver to support mpc512x gpios") implemented support for IRQ_TYPE_LEVEL_LOW flow type in mpc512x via falling edge type. Do same for mpc85xx which support was added in commit 345e5c8a1cc3 ("powerpc: Add interrupt support to mpc8xxx_gpio").
Fixes probing of lm90 hwmon driver on mpc85xx based board which use level interrupt. Without it kernel prints error and refuse lm90 to work:
[ 15.258370] genirq: Setting trigger mode 8 for irq 49 failed (mpc8xxx_irq_set_type+0x0/0xf8)
[ 15.267168] lm90 0-004c: cannot request IRQ 49
[ 15.272708] lm90: probe of 0-004c failed with error -22--- drivers/gpio/gpio-mpc8xxx.c | 1 + 1 file changed, 1 insertion(+)
drivers/gpio/gpio-mpc8xxx.c +1 -0
@@ -168,6 +168,7 @@ static int mpc8xxx_irq_set_type(struct irq_data *d, unsigned int flow_type)switch (flow_type) {case IRQ_TYPE_EDGE_FALLING : +case IRQ_TYPE_LEVEL_LOW :raw_spin_lock_irqsave (&mpc8xxx_gc->lock, flags); gc->write_reg (mpc8xxx_gc->regs +GPIO_ICR , gc->read_reg(mpc8xxx_gc->regs + GPIO_ICR)
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 3/58 drm/meson: Correct OSD1 global alpha value
In reply to Greg Kroah-HartmanFrom: Stuart Menefy <[email protected]>
[ Upstream commit 6836829c8ea453c9e3e518e61539e35881c8ed5f ]
VIU_OSD1_CTRL_STAT.GLOBAL_ALPHA is a 9 bit field, so the maximum value is 0x100 not 0xff.
This matches the vendor kernel.
--- drivers/gpu/drm/meson/meson_plane.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/meson/meson_plane.c +1 -1
@@ -101,7 +101,7 @@ static void meson_plane_atomic_update(struct drm_plane *plane,/* Enable OSD and BLK0, set max global alpha */ priv->viu.osd1_ctrl_stat =OSD_ENABLE | - (0xFF <<OSD_GLOBAL_ALPHA_SHIFT ) | + (0x100 <<OSD_GLOBAL_ALPHA_SHIFT ) |OSD_BLK0_ENABLE ;/* Set up BLK0 to point to the right canvas */
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 4/58 parisc: ccio-dma: Add missing iounmap in error path in ccio_probe()
In reply to Greg Kroah-HartmanFrom: Yang Yingliang <[email protected]>
[ Upstream commit 38238be4e881a5d0abbe4872b4cd6ed790be06c8 ]
Add missing iounmap() before return from ccio_probe(), if ccio_init_resources() fails.
--- drivers/parisc/ccio-dma.c | 1 + 1 file changed, 1 insertion(+)
drivers/parisc/ccio-dma.c +1 -0
@@ -1555,6 +1555,7 @@ static int __init ccio_probe(struct parisc_device *dev) }ccio_ioc_init (ioc);if (ccio_init_resources (ioc)) { +iounmap (ioc->ioc_regs);kfree (ioc);return -ENOMEM ; }
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 5/58 efi/libstub: Disable Shadow Call Stack
In reply to Greg Kroah-HartmanFrom: Sami Tolvanen <[email protected]>
[ Upstream commit cc49c71d2abe99c1c2c9bedf0693ad2d3ee4a067 ]
Shadow stacks are not available in the EFI stub, filter out SCS flags.
Stable-dep-of: 1a3887924a7e ("efi: libstub: Disable struct randomization")
--- drivers/firmware/efi/libstub/Makefile | 3 +++ 1 file changed, 3 insertions(+)
drivers/firmware/efi/libstub/Makefile +3 -0
@@ -31,6 +31,9 @@ KBUILD_CFLAGS := $(cflags-y) -DDISABLE_BRANCH_PROFILING \ $(call cc-option,-fno-addrsig) \ -D__DISABLE_EXPORTS +# remove SCS flags from all objects in this directory +KBUILD_CFLAGS := $(filter-out $(CC_FLAGS_SCS), $(KBUILD_CFLAGS)) + GCOV_PROFILE := n KASAN_SANITIZE := n UBSAN_SANITIZE := n
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 6/58 efi: libstub: Disable struct randomization
In reply to Greg Kroah-HartmanFrom: Ard Biesheuvel <[email protected]>
[ Upstream commit 1a3887924a7e6edd331be76da7bf4c1e8eab4b1e ]
The EFI stub is a wrapper around the core kernel that makes it look like a EFI compatible PE/COFF application to the EFI firmware. EFI applications run on top of the EFI runtime, which is heavily based on so-called protocols, which are struct types consisting [mostly] of function pointer members that are instantiated and recorded in a protocol database.
These structs look like the ideal randomization candidates to the randstruct plugin (as they only carry function pointers), but of course, these protocols are contracts between the firmware that exposes them, and the EFI applications (including our stubbed kernel) that invoke them. This means that struct randomization for EFI protocols is not a great idea, and given that the stub shares very little data with the core kernel that is represented as a randomizable struct, we're better off just disabling it completely here.
--- drivers/firmware/efi/libstub/Makefile | 7 +++++++ 1 file changed, 7 insertions(+)
drivers/firmware/efi/libstub/Makefile +7 -0
@@ -31,6 +31,13 @@ KBUILD_CFLAGS := $(cflags-y) -DDISABLE_BRANCH_PROFILING \ $(call cc-option,-fno-addrsig) \ -D__DISABLE_EXPORTS +# +# struct randomization only makes sense for Linux internal types, which the EFI +# stub code never touches, so let's turn off struct randomization for the stub +# altogether +# +KBUILD_CFLAGS := $(filter-out $(RANDSTRUCT_CFLAGS), $(KBUILD_CFLAGS)) + # remove SCS flags from all objects in this directory KBUILD_CFLAGS := $(filter-out $(CC_FLAGS_SCS), $(KBUILD_CFLAGS))
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 7/58 nvmet: fix a use-after-free
In reply to Greg Kroah-HartmanFrom: Bart Van Assche <[email protected]>
[ Upstream commit 6a02a61e81c231cc5c680c5dbf8665275147ac52 ]
Fix the following use-after-free complaint triggered by blktests nvme/004:
BUG: KASAN: user-memory-access in blk_mq_complete_request_remote+0xac/0x350 Read of size 4 at addr 0000607bd1835943 by task kworker/13:1/460 Workqueue: nvmet-wq nvme_loop_execute_work [nvme_loop] Call Trace: show_stack+0x52/0x58 dump_stack_lvl+0x49/0x5e print_report.cold+0x36/0x1e2 kasan_report+0xb9/0xf0 __asan_load4+0x6b/0x80 blk_mq_complete_request_remote+0xac/0x350 nvme_loop_queue_response+0x1df/0x275 [nvme_loop] __nvmet_req_complete+0x132/0x4f0 [nvmet] nvmet_req_complete+0x15/0x40 [nvmet] nvmet_execute_io_connect+0x18a/0x1f0 [nvmet] nvme_loop_execute_work+0x20/0x30 [nvme_loop] process_one_work+0x56e/0xa70 worker_thread+0x2d1/0x640 kthread+0x183/0x1c0 ret_from_fork+0x1f/0x30
--- drivers/nvme/target/core.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/nvme/target/core.c +3 -2
@@ -504,6 +504,7 @@ static void __nvmet_req_complete(struct nvmet_req *req, u16 status) {u32 old_sqhd, new_sqhd;u16 sqhd; +struct nvmet_ns *ns = req->ns;if (status)nvmet_set_status (req, status);
@@ -520,9 +521,9 @@ static void __nvmet_req_complete(struct nvmet_req *req, u16 status) req->rsp->sq_id =cpu_to_le16 (req->sq->qid); req->rsp->command_id = req->cmd->common.command_id; -if (req->ns) -nvmet_put_namespace (req->ns); req->ops->queue_response (req); +if (ns) +nvmet_put_namespace (ns); }void nvmet_req_complete (struct nvmet_req *req,u16 status)
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 8/58 mvpp2: no need to check return value of debugfs_create functions
In reply to Greg Kroah-HartmanFrom: Greg Kroah-Hartman <[email protected]>
[ Upstream commit e6882aa623f6fe0d80fa82ebf3ee78c353bffbe1 ]
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this.
Stable-dep-of: fe2c9c61f668 ("net: mvpp2: debugfs: fix memory leak when using debugfs_lookup()")
--- .../ethernet/marvell/mvpp2/mvpp2_debugfs.c | 19 +------------------ 1 file changed, 1 insertion(+), 18 deletions(-)
drivers/net/ethernet/marvell/mvpp2/mvpp2_debugfs.c +1 -18
@@ -484,8 +484,6 @@ static int mvpp2_dbgfs_flow_port_init(struct dentry *parent,struct dentry *port_dir; port_dir =debugfs_create_dir (port->dev->name, parent); -if (IS_ERR (port_dir)) -return PTR_ERR (port_dir);/* This will be freed by 'hash_opts' release op */ port_entry =kmalloc (sizeof (*port_entry),GFP_KERNEL );
@@ -515,8 +513,6 @@ static int mvpp2_dbgfs_flow_entry_init(struct dentry *parent,sprintf (flow_entry_name,"%02d" , flow); flow_entry_dir =debugfs_create_dir (flow_entry_name, parent); -if (!flow_entry_dir) -return -ENOMEM ;/* This will be freed by 'type' release op */ entry =kmalloc (sizeof (*entry),GFP_KERNEL );
@@ -554,8 +550,6 @@ static int mvpp2_dbgfs_flow_init(struct dentry *parent, struct mvpp2 *priv)int i, ret; flow_dir =debugfs_create_dir ("flows" , parent); -if (!flow_dir) -return -ENOMEM ;for (i =0 ; i <MVPP2_N_FLOWS ; i++) { ret =mvpp2_dbgfs_flow_entry_init (flow_dir, priv, i);
@@ -579,8 +573,6 @@ static int mvpp2_dbgfs_prs_entry_init(struct dentry *parent,sprintf (prs_entry_name,"%03d" , tid); prs_entry_dir =debugfs_create_dir (prs_entry_name, parent); -if (!prs_entry_dir) -return -ENOMEM ;/* The 'valid' entry's ops will free that */ entry =kmalloc (sizeof (*entry),GFP_KERNEL );
@@ -618,8 +610,6 @@ static int mvpp2_dbgfs_prs_init(struct dentry *parent, struct mvpp2 *priv)int i, ret; prs_dir =debugfs_create_dir ("parser" , parent); -if (!prs_dir) -return -ENOMEM ;for (i =0 ; i <MVPP2_PRS_TCAM_SRAM_SIZE ; i++) { ret =mvpp2_dbgfs_prs_entry_init (prs_dir, priv, i);
@@ -636,8 +626,6 @@ static int mvpp2_dbgfs_port_init(struct dentry *parent,struct dentry *port_dir; port_dir =debugfs_create_dir (port->dev->name, parent); -if (IS_ERR (port_dir)) -return PTR_ERR (port_dir);debugfs_create_file ("parser_entries" ,0444 , port_dir, port, &mvpp2_dbgfs_port_parser_fops);
@@ -671,15 +659,10 @@ void mvpp2_dbgfs_init(struct mvpp2 *priv, const char *name)int ret, i; mvpp2_root =debugfs_lookup (MVPP2_DRIVER_NAME ,NULL ); -if (!mvpp2_root) { +if (!mvpp2_root) mvpp2_root =debugfs_create_dir (MVPP2_DRIVER_NAME ,NULL ); -if (IS_ERR (mvpp2_root)) -return ; - } mvpp2_dir =debugfs_create_dir (name, mvpp2_root); -if (IS_ERR (mvpp2_dir)) -return ; priv->dbgfs_dir = mvpp2_dir;
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 9/58 cifs: dont send down the destination address to sendmsg for a SOCK_STREAM
In reply to Greg Kroah-HartmanFrom: Stefan Metzmacher <[email protected]>
commit 17d3df38dc5f4cec9b0ac6eb79c1859b6e2693a4 upstream.
This is ignored anyway by the tcp layer.
--- fs/cifs/transport.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
fs/cifs/transport.c +2 -2
@@ -168,8 +168,8 @@ smb_send_kvec(struct TCP_Server_Info *se *sent =0 ; - smb_msg->msg_name = (struct sockaddr *) &server->dstaddr; - smb_msg->msg_namelen =sizeof (struct sockaddr ); + smb_msg->msg_name =NULL ; + smb_msg->msg_namelen =0 ; smb_msg->msg_control =NULL ; smb_msg->msg_controllen =0 ;if (server->noblocksnd)
Greg Kroah-Hartman
maintainerPATCH 10/58 ASoC: nau8824: Fix semaphore unbalance at error paths
In reply to Greg Kroah-HartmanFrom: Takashi Iwai <[email protected]>
[ Upstream commit 5628560e90395d3812800a8e44a01c32ffa429ec ]
The semaphore of nau8824 wasn't properly unlocked at some error handling code paths, hence this may result in the unbalance (and potential lock-up). Fix them to handle the semaphore up properly.
--- sound/soc/codecs/nau8824.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-)
sound/soc/codecs/nau8824.c +10 -7
@@ -1075,6 +1075,7 @@ static int nau8824_hw_params(struct snd_pcm_substream *substream,struct snd_soc_component *component = dai->component;struct nau8824 *nau8824 =snd_soc_component_get_drvdata (component);unsigned int val_len =0 , osr, ctrl_val, bclk_fs, bclk_div; +int err = -EINVAL ;nau8824_sema_acquire (nau8824,HZ );
@@ -1091,7 +1092,7 @@ static int nau8824_hw_params(struct snd_pcm_substream *substream, osr &=NAU8824_DAC_OVERSAMPLE_MASK ;if (nau8824_clock_check (nau8824, substream->stream, nau8824->fs, osr)) -return -EINVAL ; + goto error;regmap_update_bits (nau8824->regmap,NAU8824_REG_CLK_DIVIDER ,NAU8824_CLK_DAC_SRC_MASK , osr_dac_sel[osr].clk_src <<NAU8824_CLK_DAC_SRC_SFT );
@@ -1101,7 +1102,7 @@ static int nau8824_hw_params(struct snd_pcm_substream *substream, osr &=NAU8824_ADC_SYNC_DOWN_MASK ;if (nau8824_clock_check (nau8824, substream->stream, nau8824->fs, osr)) -return -EINVAL ; + goto error;regmap_update_bits (nau8824->regmap,NAU8824_REG_CLK_DIVIDER ,NAU8824_CLK_ADC_SRC_MASK , osr_adc_sel[osr].clk_src <<NAU8824_CLK_ADC_SRC_SFT );
@@ -1122,7 +1123,7 @@ static int nau8824_hw_params(struct snd_pcm_substream *substream,else if (bclk_fs <=256 ) bclk_div =0 ;else -return -EINVAL ; + goto error; regmap_update_bits(nau8824->regmap, NAU8824_REG_PORT0_I2S_PCM_CTRL_2, NAU8824_I2S_LRC_DIV_MASK | NAU8824_I2S_BLK_DIV_MASK,
@@ -1143,15 +1144,17 @@ static int nau8824_hw_params(struct snd_pcm_substream *substream, val_len |=NAU8824_I2S_DL_32 ;break ;default : -return -EINVAL ; + goto error; }regmap_update_bits (nau8824->regmap,NAU8824_REG_PORT0_I2S_PCM_CTRL_1 ,NAU8824_I2S_DL_MASK , val_len); + err =0 ; + error:nau8824_sema_release (nau8824); -return 0 ; +return err; }static int nau8824_set_fmt (struct snd_soc_dai *dai,unsigned int fmt)
@@ -1160,8 +1163,6 @@ static int nau8824_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)struct nau8824 *nau8824 =snd_soc_component_get_drvdata (component);unsigned int ctrl1_val =0 , ctrl2_val =0 ; -nau8824_sema_acquire (nau8824,HZ ); -switch (fmt &SND_SOC_DAIFMT_MASTER_MASK ) {case SND_SOC_DAIFMT_CBM_CFM : ctrl2_val |=NAU8824_I2S_MS_MASTER ;
@@ -1203,6 +1204,8 @@ static int nau8824_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)return -EINVAL ; } +nau8824_sema_acquire (nau8824,HZ ); +regmap_update_bits (nau8824->regmap,NAU8824_REG_PORT0_I2S_PCM_CTRL_1 ,NAU8824_I2S_DF_MASK |NAU8824_I2S_BP_MASK |NAU8824_I2S_PCMB_EN , ctrl1_val);
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 11/58 regulator: pfuze100: Fix the global-out-of-bounds access in pfuze100_regulator_probe()
In reply to Greg Kroah-HartmanFrom: Xiaolei Wang <[email protected]>
[ Upstream commit 78e1e867f44e6bdc72c0e6a2609a3407642fb30b ]
The pfuze_chip::regulator_descs is an array of size PFUZE100_MAX_REGULATOR, the pfuze_chip::pfuze_regulators is the pointer to the real regulators of a specific device. The number of real regulator is supposed to be less than the PFUZE100_MAX_REGULATOR, so we should use the size of 'regulator_num * sizeof(struct pfuze_regulator)' in memcpy(). This fixes the out of bounds access bug reported by KASAN.
--- drivers/regulator/pfuze100-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/regulator/pfuze100-regulator.c +1 -1
@@ -710,7 +710,7 @@ static int pfuze100_regulator_probe(struct i2c_client *client, ((pfuze_chip->chip_id == PFUZE3000) ? "3000" : "3001"))));memcpy (pfuze_chip->regulator_descs, pfuze_chip->pfuze_regulators, -sizeof (pfuze_chip->regulator_descs)); + regulator_num *sizeof (struct pfuze_regulator )); ret =pfuze_parse_regulators_dt (pfuze_chip);if (ret)
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 12/58 rxrpc: Fix local destruction being repeated
In reply to Greg Kroah-HartmanFrom: David Howells <[email protected]>
[ Upstream commit d3d863036d688313f8d566b87acd7d99daf82749 ]
If the local processor work item for the rxrpc local endpoint gets requeued by an event (such as an incoming packet) between it getting scheduled for destruction and the UDP socket being closed, the rxrpc_local_destroyer() function can get run twice. The second time it can hang because it can end up waiting for cleanup events that will never happen.
--- net/rxrpc/local_object.c | 3 +++ 1 file changed, 3 insertions(+)
net/rxrpc/local_object.c +3 -0
@@ -452,6 +452,9 @@ static void rxrpc_local_processor(struct work_struct *work) container_of(work, struct rxrpc_local, processor);bool again; +if (local->dead) +return ; +trace_rxrpc_local (local->debug_id, rxrpc_local_processing,atomic_read (&local->usage),NULL );
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 13/58 ALSA: hda/sigmatel: Keep power up while beep is enabled
In reply to Greg Kroah-HartmanFrom: Takashi Iwai <[email protected]>
[ Upstream commit 414d38ba871092aeac4ed097ac4ced89486646f7 ]
It seems that the beep playback doesn't work well on IDT codec devices when the codec auto-pm is enabled. Keep the power on while the beep switch is enabled.
--- sound/pci/hda/patch_sigmatel.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)
sound/pci/hda/patch_sigmatel.c +22 -0
@@ -222,6 +222,7 @@ struct sigmatel_spec {/* beep widgets */ hda_nid_t anabeep_nid; +bool beep_power_on;/* SPDIF-out mux */ const char *const *spdif_labels;
@@ -4463,6 +4464,26 @@ static int stac_suspend(struct hda_codec *codec)stac_shutup (codec); return 0; } + +static int stac_check_power_status (struct hda_codec *codec,hda_nid_t nid) +{ +struct sigmatel_spec *spec = codec->spec; +int ret =snd_hda_gen_check_power_status (codec, nid); + +#ifdef CONFIG_SND_HDA_INPUT_BEEP +if (nid == spec->gen.beep_nid && codec->beep) { +if (codec->beep->enabled != spec->beep_power_on) { + spec->beep_power_on = codec->beep->enabled; +if (spec->beep_power_on) +snd_hda_power_up_pm (codec); +else +snd_hda_power_down_pm (codec); + } + ret |= spec->beep_power_on; + } +#endif +return ret; +}#else #define stac_suspend NULL#endif /* CONFIG_PM */
@@ -4475,6 +4496,7 @@ static const struct hda_codec_ops stac_patch_ops = { .unsol_event = snd_hda_jack_unsol_event, #ifdef CONFIG_PM .suspend = stac_suspend, + .check_power_status = stac_check_power_status, #endif .reboot_notify = stac_shutup, };
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 14/58 net: usb: qmi_wwan: add Quectel RM520N
In reply to Greg Kroah-HartmanFrom: jerry.meng <[email protected]>
[ Upstream commit e1091e226a2bab4ded1fe26efba2aee1aab06450 ]
add support for Quectel RM520N which is based on Qualcomm SDX62 chip.
0x0801: DIAG + NMEA + AT + MODEM + RMNET
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0801 Rev= 5.04 S: Manufacturer=Quectel S: Product=RM520N-GL S: SerialNumber=384af524 C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
--- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+)
drivers/net/usb/qmi_wwan.c +1 -0
@@ -1049,6 +1049,7 @@ static const struct usb_device_id products[] = { {QMI_MATCH_FF_FF_FF(0x2c7c, 0x0512)}, /* Quectel EG12/EM12 */ {QMI_MATCH_FF_FF_FF(0x2c7c, 0x0620)}, /* Quectel EM160R-GL */ {QMI_MATCH_FF_FF_FF(0x2c7c, 0x0800)}, /* Quectel RM500Q-GL */ + {QMI_MATCH_FF_FF_FF(0x2c7c, 0x0801)}, /* Quectel RM520N *//* 3. Combined interface devices matching on interface number */ {QMI_FIXED_INTF(0x0408, 0xea42, 4)}, /* Yota / Megafon M100-1 */
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 15/58 MIPS: OCTEON: irq: Fix octeon_irq_force_ciu_mapping()
In reply to Greg Kroah-HartmanFrom: Alexander Sverdlin <[email protected]>
[ Upstream commit ba912afbd611d3a5f22af247721a071ad1d5b9e0 ]
For irq_domain_associate() to work the virq descriptor has to be pre-allocated in advance. Otherwise the following happens:
WARNING: CPU: 0 PID: 0 at .../kernel/irq/irqdomain.c:527 irq_domain_associate+0x298/0x2e8
error: virq128 is not allocated
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.78-... #1
...
Call Trace:
[<ffffffff801344c4>] show_stack+0x9c/0x130
[<ffffffff80769550>] dump_stack+0x90/0xd0
[<ffffffff801576d0>] __warn+0x118/0x130
[<ffffffff80157734>] warn_slowpath_fmt+0x4c/0x70
[<ffffffff801b83c0>] irq_domain_associate+0x298/0x2e8
[<ffffffff80a43bb8>] octeon_irq_init_ciu+0x4c8/0x53c
[<ffffffff80a76cbc>] of_irq_init+0x1e0/0x388
[<ffffffff80a452cc>] init_IRQ+0x4c/0xf4
[<ffffffff80a3cc00>] start_kernel+0x404/0x698Use irq_alloc_desc_at() to avoid the above problem.
--- arch/mips/cavium-octeon/octeon-irq.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
arch/mips/cavium-octeon/octeon-irq.c +10 -0
@@ -127,6 +127,16 @@ static void octeon_irq_free_cd(struct irq_domain *d, unsigned int irq)static int octeon_irq_force_ciu_mapping (struct irq_domain *domain,int irq,int line,int bit) { +struct device_node *of_node; +int ret; + + of_node =irq_domain_get_of_node (domain); +if (!of_node) +return -EINVAL ; + ret =irq_alloc_desc_at (irq,of_node_to_nid (of_node)); +if (ret <0 ) +return ret; +return irq_domain_associate (domain, irq, line <<6 | bit); }
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 16/58 mksysmap: Fix the mismatch of L0 symbols in System.map
In reply to Greg Kroah-HartmanFrom: Youling Tang <[email protected]>
[ Upstream commit c17a2538704f926ee4d167ba625e09b1040d8439 ]
When System.map was generated, the kernel used mksysmap to filter the kernel symbols, we need to filter "L0" symbols in LoongArch architecture.
$ cat System.map | grep L0 9000000000221540 t L0
The L0 symbol exists in System.map, but not in .tmp_System.map. When "cmp -s System.map .tmp_System.map" will show "Inconsistent kallsyms data" error message in link-vmlinux.sh script.
--- scripts/mksysmap | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
scripts/mksysmap +1 -1
@@ -41,4 +41,4 @@ # so we just ignore them to let readprofile continue to work. # (At least sparc64 has __crc_ in the middle). -$NM -n $1 | grep -v '\( [aNUw] \)\|\(__crc_\)\|\( \$[adt]\)\|\( \.L\)' > $2 +$NM -n $1 | grep -v '\( [aNUw] \)\|\(__crc_\)\|\( \$[adt]\)\|\( \.L\)\|\( L0\)' > $2
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 17/58 video: fbdev: pxa3xx-gcu: Fix integer overflow in pxa3xx_gcu_write
In reply to Greg Kroah-HartmanFrom: Hyunwoo Kim <[email protected]>
[ Upstream commit a09d2d00af53b43c6f11e6ab3cb58443c2cac8a7 ]
In pxa3xx_gcu_write, a count parameter of type size_t is passed to words of type int. Then, copy_from_user() may cause a heap overflow because it is used as the third argument of copy_from_user().
--- drivers/video/fbdev/pxa3xx-gcu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/video/fbdev/pxa3xx-gcu.c +1 -1
@@ -394,7 +394,7 @@ pxa3xx_gcu_write(struct file *file, const char *buff,struct pxa3xx_gcu_batch *buffer;struct pxa3xx_gcu_priv *priv =to_pxa3xx_gcu_priv (file); -int words = count /4 ; +size_t words = count /4 ;/* Does not need to be atomic. There's a lock in user space, * but anyhow, this is just for statistics. */
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 18/58 ALSA: hda/sigmatel: Fix unused variable warning for beep power change
In reply to Greg Kroah-HartmanFrom: Takashi Iwai <[email protected]>
commit 51bdc8bb82525cd70feb92279c8b7660ad7948dd upstream.
The newly added stac_check_power_status() caused a compile warning when CONFIG_SND_HDA_INPUT_BEEP is disabled. Fix it.
--- sound/pci/hda/patch_sigmatel.c | 2 ++ 1 file changed, 2 insertions(+)
sound/pci/hda/patch_sigmatel.c +2 -0
@@ -4467,7 +4467,9 @@ static int stac_suspend(struct hda_codecstatic int stac_check_power_status (struct hda_codec *codec,hda_nid_t nid) { +#ifdef CONFIG_SND_HDA_INPUT_BEEP struct sigmatel_spec *spec = codec->spec; +#endif int ret =snd_hda_gen_check_power_status (codec, nid);#ifdef CONFIG_SND_HDA_INPUT_BEEP
Greg Kroah-Hartman
maintainerPATCH 19/58 usb: dwc3: pci: Add Support for Intel Elkhart Lake Devices
In reply to Greg Kroah-HartmanFrom: Felipe Balbi <[email protected]>
[ Upstream commit dbb0569de852fb4576d6f62078d515f989a181ca ]
This patch simply adds a new PCI Device ID
Stable-dep-of: bad0d1d726ac ("usb: dwc3: pci: Add support for Intel Raptor Lake")
--- drivers/usb/dwc3/dwc3-pci.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/usb/dwc3/dwc3-pci.c +4 -0
@@ -36,6 +36,7 @@#define PCI_DEVICE_ID_INTEL_CNPH 0xa36e#define PCI_DEVICE_ID_INTEL_CNPV 0xa3b0#define PCI_DEVICE_ID_INTEL_ICLLP 0x34ee +#define PCI_DEVICE_ID_INTEL_EHLLP 0x4b7e#define PCI_INTEL_BXT_DSM_GUID "732b85d5-b7a7-4a1b-9ba0-4bbd00ffd511"#define PCI_INTEL_BXT_FUNC_PMU_PWR 4
@@ -351,6 +352,9 @@ static const struct pci_device_id dwc3_pci_id_table[] = { {PCI_VDEVICE (INTEL ,PCI_DEVICE_ID_INTEL_ICLLP ), (kernel_ulong_t) &dwc3_pci_intel_properties, }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_EHLLP), + (kernel_ulong_t) &dwc3_pci_intel_properties, }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_NL_USB), (kernel_ulong_t) &dwc3_pci_amd_properties, }, { } /* Terminating Entry */
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 20/58 usb: dwc3: pci: add support for TigerLake Devices
In reply to Greg Kroah-HartmanFrom: Felipe Balbi <[email protected]>
[ Upstream commit b3649dee5fbb0f6585010e6e9313dfcbb075b22b ]
This patch adds the necessary PCI ID for TGP-LP devices.
Stable-dep-of: bad0d1d726ac ("usb: dwc3: pci: Add support for Intel Raptor Lake")
--- drivers/usb/dwc3/dwc3-pci.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/usb/dwc3/dwc3-pci.c +4 -0
@@ -37,6 +37,7 @@#define PCI_DEVICE_ID_INTEL_CNPV 0xa3b0#define PCI_DEVICE_ID_INTEL_ICLLP 0x34ee#define PCI_DEVICE_ID_INTEL_EHLLP 0x4b7e +#define PCI_DEVICE_ID_INTEL_TGPLP 0xa0ee#define PCI_INTEL_BXT_DSM_GUID "732b85d5-b7a7-4a1b-9ba0-4bbd00ffd511"#define PCI_INTEL_BXT_FUNC_PMU_PWR 4
@@ -355,6 +356,9 @@ static const struct pci_device_id dwc3_pci_id_table[] = { {PCI_VDEVICE (INTEL ,PCI_DEVICE_ID_INTEL_EHLLP ), (kernel_ulong_t) &dwc3_pci_intel_properties, }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_TGPLP), + (kernel_ulong_t) &dwc3_pci_intel_properties, }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_NL_USB), (kernel_ulong_t) &dwc3_pci_amd_properties, }, { } /* Terminating Entry */
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 21/58 usb: dwc3: pci: add support for the Intel Tiger Lake PCH -H variant
In reply to Greg Kroah-HartmanFrom: Heikki Krogerus <[email protected]>
[ Upstream commit c3f595a8119207cc0f82b3dc6ec5bbf6f3e6b135 ]
This patch adds the necessary PCI ID for TGP-H devices.
Stable-dep-of: bad0d1d726ac ("usb: dwc3: pci: Add support for Intel Raptor Lake")
--- drivers/usb/dwc3/dwc3-pci.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/usb/dwc3/dwc3-pci.c +4 -0
@@ -38,6 +38,7 @@#define PCI_DEVICE_ID_INTEL_ICLLP 0x34ee#define PCI_DEVICE_ID_INTEL_EHLLP 0x4b7e#define PCI_DEVICE_ID_INTEL_TGPLP 0xa0ee +#define PCI_DEVICE_ID_INTEL_TGPH 0x43ee#define PCI_INTEL_BXT_DSM_GUID "732b85d5-b7a7-4a1b-9ba0-4bbd00ffd511"#define PCI_INTEL_BXT_FUNC_PMU_PWR 4
@@ -359,6 +360,9 @@ static const struct pci_device_id dwc3_pci_id_table[] = { {PCI_VDEVICE (INTEL ,PCI_DEVICE_ID_INTEL_TGPLP ), (kernel_ulong_t) &dwc3_pci_intel_properties, }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_TGPH), + (kernel_ulong_t) &dwc3_pci_intel_properties, }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_NL_USB), (kernel_ulong_t) &dwc3_pci_amd_properties, }, { } /* Terminating Entry */
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 22/58 usb: dwc3: pci: add support for the Intel Jasper Lake
In reply to Greg Kroah-HartmanFrom: Heikki Krogerus <[email protected]>
[ Upstream commit e25d1e8532c3d84f075deca1580a7d61e0f43ce6 ]
This patch adds the necessary PCI ID for Intel Jasper Lake devices.
Stable-dep-of: bad0d1d726ac ("usb: dwc3: pci: Add support for Intel Raptor Lake")
--- drivers/usb/dwc3/dwc3-pci.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/usb/dwc3/dwc3-pci.c +4 -0
@@ -39,6 +39,7 @@#define PCI_DEVICE_ID_INTEL_EHLLP 0x4b7e#define PCI_DEVICE_ID_INTEL_TGPLP 0xa0ee#define PCI_DEVICE_ID_INTEL_TGPH 0x43ee +#define PCI_DEVICE_ID_INTEL_JSP 0x4dee#define PCI_INTEL_BXT_DSM_GUID "732b85d5-b7a7-4a1b-9ba0-4bbd00ffd511"#define PCI_INTEL_BXT_FUNC_PMU_PWR 4
@@ -363,6 +364,9 @@ static const struct pci_device_id dwc3_pci_id_table[] = { {PCI_VDEVICE (INTEL ,PCI_DEVICE_ID_INTEL_TGPH ), (kernel_ulong_t) &dwc3_pci_intel_properties, }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_JSP), + (kernel_ulong_t) &dwc3_pci_intel_properties, }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_NL_USB), (kernel_ulong_t) &dwc3_pci_amd_properties, }, { } /* Terminating Entry */
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 23/58 usb: dwc3: pci: add support for the Intel Alder Lake-S
In reply to Greg Kroah-HartmanFrom: Heikki Krogerus <[email protected]>
[ Upstream commit 1384ab4fee12c4c4f8bd37bc9f8686881587b286 ]
This patch adds the necessary PCI ID for Intel Alder Lake-S devices.
Stable-dep-of: bad0d1d726ac ("usb: dwc3: pci: Add support for Intel Raptor Lake")
--- drivers/usb/dwc3/dwc3-pci.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/usb/dwc3/dwc3-pci.c +4 -0
@@ -40,6 +40,7 @@#define PCI_DEVICE_ID_INTEL_TGPLP 0xa0ee#define PCI_DEVICE_ID_INTEL_TGPH 0x43ee#define PCI_DEVICE_ID_INTEL_JSP 0x4dee +#define PCI_DEVICE_ID_INTEL_ADLS 0x7ae1#define PCI_INTEL_BXT_DSM_GUID "732b85d5-b7a7-4a1b-9ba0-4bbd00ffd511"#define PCI_INTEL_BXT_FUNC_PMU_PWR 4
@@ -367,6 +368,9 @@ static const struct pci_device_id dwc3_pci_id_table[] = { {PCI_VDEVICE (INTEL ,PCI_DEVICE_ID_INTEL_JSP ), (kernel_ulong_t) &dwc3_pci_intel_properties, }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ADLS), + (kernel_ulong_t) &dwc3_pci_intel_properties, }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_NL_USB), (kernel_ulong_t) &dwc3_pci_amd_properties, }, { } /* Terminating Entry */
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 24/58 wifi: mac80211: Fix UAF in ieee80211_scan_rx()
In reply to Greg Kroah-HartmanFrom: Siddh Raman Pant <[email protected]>
[ Upstream commit 60deb9f10eec5c6a20252ed36238b55d8b614a2c ]
ieee80211_scan_rx() tries to access scan_req->flags after a null check, but a UAF is observed when the scan is completed and __ieee80211_scan_completed() executes, which then calls cfg80211_scan_done() leading to the freeing of scan_req.
Since scan_req is rcu_dereference()'d, prevent the racing in __ieee80211_scan_completed() by ensuring that from mac80211's POV it is no longer accessed from an RCU read critical section before we call cfg80211_scan_done().
--- net/mac80211/scan.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-)
net/mac80211/scan.c +7 -4
@@ -412,10 +412,6 @@ static void __ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted) scan_req =rcu_dereference_protected (local->scan_req,lockdep_is_held (&local->mtx)); -if (scan_req != local->int_scan_req) { - local->scan_info.aborted = aborted; -cfg80211_scan_done (scan_req, &local->scan_info); - }RCU_INIT_POINTER (local->scan_req,NULL ); scan_sdata = rcu_dereference_protected(local->scan_sdata,
@@ -425,6 +421,13 @@ static void __ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted) local->scanning =0 ; local->scan_chandef.chan =NULL ; +synchronize_rcu (); + +if (scan_req != local->int_scan_req) { + local->scan_info.aborted = aborted; +cfg80211_scan_done (scan_req, &local->scan_info); + } +/* Set power back to normal operating levels. */ ieee80211_hw_config (local,0 );
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 25/58 USB: core: Fix RST error in hub.c
In reply to Greg Kroah-HartmanFrom: Alan Stern <[email protected]>
commit 766a96dc558385be735a370db867e302c8f22153 upstream.
A recent commit added an invalid RST expression to a kerneldoc comment in hub.c. The fix is trivial.
--- drivers/usb/core/hub.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/core/hub.c +1 -1
@@ -5852,7 +5852,7 @@ re_enumerate_no_bos:* * Return: The same as for usb_reset_and_verify_device(). * However, if a reset is already in progress (for instance, if a -* driver doesn't have pre_ or post_reset() callbacks, and while +* driver doesn't have pre_reset() or post_reset() callbacks, and while * being unbound or re-bound during the ongoing reset its disconnect() * or probe() routine tries to perform a second, nested reset), the * routine returns -EINPROGRESS.
Greg Kroah-Hartman
maintainerPATCH 26/58 USB: serial: option: add Quectel BG95 0x0203 composition
In reply to Greg Kroah-HartmanFrom: Carl Yin(殷张成) <[email protected]>
commit f8f67eff6847f9b8d753fa029723bcc54296055a upstream.
Add support for the following Quectel BG95 composition:
0x0203: Diag + GNSS + Modem + ECM
usb-devices output:
T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0203 Rev= 0.00 S: Manufacturer=Quectel, Incorporated S: Product=Quectel LPWA Module S: SerialNumber=71d3a21b C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA A: FirstIf#= 3 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00 I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms I: If#= 4 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
--- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/usb/serial/option.c +2 -0
@@ -1138,6 +1138,8 @@ static const struct usb_device_id option { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95, 0xff, 0xff, 0xff), .driver_info = NUMEP2 }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95, 0xff, 0, 0) }, + { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, 0x0203, 0xff), /* BG95-M3 */ + .driver_info = ZLP }, { USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96), .driver_info = RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0xff, 0xff),
Greg Kroah-Hartman
maintainerPATCH 27/58 USB: serial: option: add Quectel RM520N
In reply to Greg Kroah-HartmanFrom: jerry meng <[email protected]>
commit d640c4cb8f2f933c0ca896541f9de7fb1ae245f4 upstream.
add support for Quectel RM520N which is based on Qualcomm SDX62 chip.
0x0801: DIAG + NMEA + AT + MODEM + RMNET
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0801 Rev= 5.04 S: Manufacturer=Quectel S: Product=RM520N-GL S: SerialNumber=384af524 C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
--- drivers/usb/serial/option.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/usb/serial/option.c +4 -0
@@ -256,6 +256,7 @@ static void option_instat_callback(struc#define QUECTEL_PRODUCT_EM060K 0x030b#define QUECTEL_PRODUCT_EM12 0x0512#define QUECTEL_PRODUCT_RM500Q 0x0800 +#define QUECTEL_PRODUCT_RM520N 0x0801#define QUECTEL_PRODUCT_EC200S_CN 0x6002#define QUECTEL_PRODUCT_EC200T 0x6026#define QUECTEL_PRODUCT_RM500K 0x7001
@@ -1161,6 +1162,9 @@ static const struct usb_device_id option { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x10), .driver_info = ZLP }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM520N, 0xff, 0xff, 0x30) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM520N, 0xff, 0, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM520N, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200S_CN, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200T, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500K, 0xff, 0x00, 0x00) },
Greg Kroah-Hartman
maintainerPATCH 28/58 ALSA: hda/tegra: set depop delay for tegra
In reply to Greg Kroah-HartmanFrom: Mohan Kumar <[email protected]>
commit 3c4d8c24fb6c44f426e447b04800b0ed61a7b5ae upstream.
Reduce the suspend time by setting depop delay to 10ms for tegra.
--- sound/pci/hda/patch_hdmi.c | 1 + 1 file changed, 1 insertion(+)
sound/pci/hda/patch_hdmi.c +1 -0
@@ -3455,6 +3455,7 @@ static int patch_tegra_hdmi(struct hda_cif (err)return err; + codec->depop_delay =10 ; codec->patch_ops.build_pcms = tegra_hdmi_build_pcms; spec = codec->spec; spec->chmap.ops.chmap_cea_alloc_validate_get_type =
Greg Kroah-Hartman
maintainerPATCH 29/58 ALSA: hda: add Intel 5 Series / 3400 PCI DID
In reply to Greg Kroah-HartmanFrom: Kai Vehmanen <[email protected]>
commit 4d40ceef4745536289012670103c59264e0fb3ec upstream.
Handle 0x3b57 variant with same AZX_DCAPS_INTEL_PCH_NOPM capabilities as 0x3b56. In practise this allow use of HDMI/DP display audio via i915.
--- sound/pci/hda/hda_intel.c | 2 ++ 1 file changed, 2 insertions(+)
sound/pci/hda/hda_intel.c +2 -0
@@ -2634,6 +2634,8 @@ static const struct pci_device_id azx_id/* 5 Series/3400 */ { PCI_DEVICE(0x8086, 0x3b56), .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH_NOPM }, + { PCI_DEVICE(0x8086, 0x3b57), + .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH_NOPM }, /* Poulsbo */ { PCI_DEVICE(0x8086, 0x811b), .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH_BASE },
Greg Kroah-Hartman
maintainerPATCH 30/58 ALSA: hda/realtek: Enable 4-speaker output Dell Precision 5530 laptop
In reply to Greg Kroah-HartmanFrom: Callum Osmotherly <[email protected]>
commit 1885ff13d4c42910b37a0e3f7c2f182520f4eed1 upstream.
Just as with the 5570 (and the other Dell laptops), this enables the two subwoofer speakers on the Dell Precision 5530 together with the main ones, significantly increasing the audio quality. I've tested this myself on a 5530 and can confirm it's working as expected.
--- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+)
sound/pci/hda/patch_realtek.c +1 -0
@@ -7081,6 +7081,7 @@ static const struct snd_pci_quirk alc269SND_PCI_QUIRK (0x1028 ,0x0871 ,"Dell Precision 3630" ,ALC255_FIXUP_DELL_HEADSET_MIC ),SND_PCI_QUIRK (0x1028 ,0x0872 ,"Dell Precision 3630" ,ALC255_FIXUP_DELL_HEADSET_MIC ),SND_PCI_QUIRK (0x1028 ,0x0873 ,"Dell Precision 3930" ,ALC255_FIXUP_DUMMY_LINEOUT_VERB ), +SND_PCI_QUIRK (0x1028 ,0x087d ,"Dell Precision 5530" ,ALC289_FIXUP_DUAL_SPK ),SND_PCI_QUIRK (0x1028 ,0x08ad ,"Dell WYSE AIO" ,ALC225_FIXUP_DELL_WYSE_AIO_MIC_NO_PRESENCE ),SND_PCI_QUIRK (0x1028 ,0x08ae ,"Dell WYSE NB" ,ALC225_FIXUP_DELL1_MIC_NO_PRESENCE ), SND_PCI_QUIRK(0x1028, 0x0935, "Dell", ALC274_FIXUP_DELL_AIO_LINEOUT_VERB),
Greg Kroah-Hartman
maintainerPATCH 31/58 efi: libstub: check Shim mode using MokSBStateRT
In reply to Greg Kroah-HartmanFrom: Ard Biesheuvel <[email protected]>
commit 5f56a74cc0a6d9b9f8ba89cea29cd7c4774cb2b1 upstream.
We currently check the MokSBState variable to decide whether we should treat UEFI secure boot as being disabled, even if the firmware thinks otherwise. This is used by shim to indicate that it is not checking signatures on boot images. In the kernel, we use this to relax lockdown policies.
However, in cases where shim is not even being used, we don't want this variable to interfere with lockdown, given that the variable may be non-volatile and therefore persist across a reboot. This means setting it once will persistently disable lockdown checks on a given system.
So switch to the mirrored version of this variable, called MokSBStateRT, which is supposed to be volatile, and this is something we can check.
--- drivers/firmware/efi/libstub/secureboot.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/firmware/efi/libstub/secureboot.c +4 -4
@@ -21,7 +21,7 @@ static const efi_char16_t efi_SetupMode_/* SHIM variables */ static const efi_guid_t shim_guid =EFI_SHIM_LOCK_GUID ; -static const efi_char16_t shim_MokSBState_name[] =L"MokSBState" ; +static const efi_char16_t shim_MokSBState_name[] =L"MokSBStateRT" ;#define get_efi_var (name, vendor, ...) \ efi_call_runtime(get_variable, \
@@ -60,8 +60,8 @@ enum efi_secureboot_mode efi_get_secureb/* * See if a user has put the shim into insecure mode. If so, and if the -* variable doesn't have the runtime attribute set, we might as well -* honor that. +* variable doesn't have the non-volatile attribute set, we might as +* well honor that. */ size =sizeof (moksbstate); status = get_efi_var(shim_MokSBState_name, &shim_guid,
@@ -70,7 +70,7 @@ enum efi_secureboot_mode efi_get_secureb/* If it fails, we don't care why. Default to secure */ if (status !=EFI_SUCCESS ) goto secure_boot_enabled; -if (!(attr &EFI_VARIABLE_RUNTIME_ACCESS ) && moksbstate ==1 ) +if (!(attr &EFI_VARIABLE_NON_VOLATILE ) && moksbstate ==1 )return efi_secureboot_mode_disabled; secure_boot_enabled:
Greg Kroah-Hartman
maintainerPATCH 32/58 riscv: fix a nasty sigreturn bug...
In reply to Greg Kroah-HartmanFrom: Al Viro <[email protected]>
commit 762df359aa5849e010ef04c3ed79d57588ce17d9 upstream.
riscv has an equivalent of arm bug fixed by 653d48b22166 ("arm: fix really nasty sigreturn bug"); if signal gets caught by an interrupt that hits when we have the right value in a0 (-513), *and* another signal gets delivered upon sigreturn() (e.g. included into the blocked mask for the first signal and posted while the handler had been running), the syscall restart logics will see regs->cause equal to EXC_SYSCALL (we are in a syscall, after all) and a0 already restored to its original value (-513, which happens to be -ERESTARTNOINTR) and assume that we need to apply the usual syscall restart logics.
--- arch/riscv/kernel/signal.c | 2 ++ 1 file changed, 2 insertions(+)
arch/riscv/kernel/signal.c +2 -0
@@ -105,6 +105,8 @@ SYSCALL_DEFINE0(rt_sigreturn)if (restore_altstack (&frame->uc.uc_stack)) goto badframe; + regs->cause =-1UL ; +return regs->a0; badframe:
Greg Kroah-Hartman
maintainerPATCH 33/58 mm/slub: fix to return errno if kmalloc() fails
In reply to Greg Kroah-HartmanFrom: Chao Yu <[email protected]>
commit 7e9c323c52b379d261a72dc7bd38120a761a93cd upstream.
In create_unique_id(), kmalloc(, GFP_KERNEL) can fail due to out-of-memory, if it fails, return errno correctly rather than triggering panic via BUG_ON();
kernel BUG at mm/slub.c:5893!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Call trace: sysfs_slab_add+0x258/0x260 mm/slub.c:5973 __kmem_cache_create+0x60/0x118 mm/slub.c:4899 create_cache mm/slab_common.c:229 [inline] kmem_cache_create_usercopy+0x19c/0x31c mm/slab_common.c:335 kmem_cache_create+0x1c/0x28 mm/slab_common.c:390 f2fs_kmem_cache_create fs/f2fs/f2fs.h:2766 [inline] f2fs_init_xattr_caches+0x78/0xb4 fs/f2fs/xattr.c:808 f2fs_fill_super+0x1050/0x1e0c fs/f2fs/super.c:4149 mount_bdev+0x1b8/0x210 fs/super.c:1400 f2fs_mount+0x44/0x58 fs/f2fs/super.c:4512 legacy_get_tree+0x30/0x74 fs/fs_context.c:610 vfs_get_tree+0x40/0x140 fs/super.c:1530 do_new_mount+0x1dc/0x4e4 fs/namespace.c:3040 path_mount+0x358/0x914 fs/namespace.c:3370 do_mount fs/namespace.c:3383 [inline] __do_sys_mount fs/namespace.c:3591 [inline] __se_sys_mount fs/namespace.c:3568 [inline] __arm64_sys_mount+0x2f8/0x408 fs/namespace.c:3568
--- mm/slub.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
mm/slub.c +4 -1
@@ -5688,7 +5688,8 @@ static char *create_unique_id(struct kmechar *name =kmalloc (ID_STR_LENGTH ,GFP_KERNEL );char *p = name; -BUG_ON (!name); +if (!name) +return ERR_PTR (-ENOMEM ); *p++ =':' ;/*
@@ -5770,6 +5771,8 @@ static int sysfs_slab_add(struct kmem_ca* for the symlinks. */ name =create_unique_id (s); +if (IS_ERR (name)) +return PTR_ERR (name); } s->kobj.kset = kset;
Greg Kroah-Hartman
maintainerPATCH 34/58 arm64: dts: rockchip: Set RK3399-Gru PCLK_EDP to 24 MHz
In reply to Greg Kroah-HartmanFrom: zain wang <[email protected]>
[ Upstream commit 8123437cf46ea5a0f6ca5cb3c528d8b6db97b9c2 ]
We've found the AUX channel to be less reliable with PCLK_EDP at a higher rate (typically 25 MHz). This is especially important on systems with PSR-enabled panels (like Gru-Kevin), since we make heavy, constant use of AUX.
According to Rockchip, using any rate other than 24 MHz can cause "problems between syncing the PHY an PCLK", which leads to all sorts of unreliabilities around register operations.
--- arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+)
arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi +8 -0
@@ -232,6 +232,14 @@ &cdn_dp { &edp { status = "okay"; + /* + * eDP PHY/clk don't sync reliably at anything other than 24 MHz. Only + * set this here, because rk3399-gru.dtsi ensures we can generate this + * off GPLL=600MHz, whereas some other RK3399 boards may not. + */ + assigned-clocks = <&cru PCLK_EDP>; + assigned-clock-rates = <24000000>; + ports { edp_out: port@1 { reg = <1>;
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 35/58 arm64: dts: rockchip: Remove enable-active-low from rk3399-puma
In reply to Greg Kroah-HartmanFrom: Fabio Estevam <[email protected]>
[ Upstream commit a994b34b9abb9c08ee09e835b4027ff2147f9d94 ]
The 'enable-active-low' property is not a valid one.
Only 'enable-active-high' is valid, and when this property is absent the gpio regulator will act as active low by default.
Remove the invalid 'enable-active-low' property.
--- arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 1 - 1 file changed, 1 deletion(-)
arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi +0 -1
@@ -102,7 +102,6 @@ vcc3v3_sys: vcc3v3-sys { vcc5v0_host: vcc5v0-host-regulator { compatible = "regulator-fixed"; gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>; - enable-active-low; pinctrl-names = "default"; pinctrl-0 = <&vcc5v0_host_en>; regulator-name = "vcc5v0_host";
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 36/58 netfilter: nf_conntrack_sip: fix ct_sip_walk_headers
In reply to Greg Kroah-HartmanFrom: Igor Ryzhov <[email protected]>
[ Upstream commit 39aebedeaaa95757f5c1f2ddb5f43fdddbf478ca ]
ct_sip_next_header and ct_sip_get_header return an absolute value of matchoff, not a shift from current dataoff. So dataoff should be assigned matchoff, not incremented by it.
This issue can be seen in the scenario when there are multiple Contact headers and the first one is using a hostname and other headers use IP addresses. In this case, ct_sip_walk_headers will work as follows:
The first ct_sip_get_header call to will find the first Contact header but will return -1 as the header uses a hostname. But matchoff will be changed to the offset of this header. After that, dataoff should be set to matchoff, so that the next ct_sip_get_header call find the next Contact header. But instead of assigning dataoff to matchoff, it is incremented by it, which is not correct, as matchoff is an absolute value of the offset. So on the next call to the ct_sip_get_header, dataoff will be incorrect, and the next Contact header may not be found at all.
--- net/netfilter/nf_conntrack_sip.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
net/netfilter/nf_conntrack_sip.c +2 -2
@@ -471,7 +471,7 @@ static int ct_sip_walk_headers(const struct nf_conn *ct, const char *dptr,return ret;if (ret ==0 )break ; - dataoff += *matchoff; + dataoff = *matchoff; } *in_header =0 ; }
@@ -483,7 +483,7 @@ static int ct_sip_walk_headers(const struct nf_conn *ct, const char *dptr,break ;if (ret ==0 )return ret; - dataoff += *matchoff; + dataoff = *matchoff; }if (in_header)
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 37/58 netfilter: nf_conntrack_irc: Tighten matching on DCC message
In reply to Greg Kroah-HartmanFrom: David Leadbeater <[email protected]>
[ Upstream commit e8d5dfd1d8747b56077d02664a8838c71ced948e ]
CTCP messages should only be at the start of an IRC message, not anywhere within it.
While the helper only decodes packes in the ORIGINAL direction, its possible to make a client send a CTCP message back by empedding one into a PING request. As-is, thats enough to make the helper believe that it saw a CTCP message.
--- net/netfilter/nf_conntrack_irc.c | 34 ++++++++++++++++++++++++++------ 1 file changed, 28 insertions(+), 6 deletions(-)
net/netfilter/nf_conntrack_irc.c +28 -6
@@ -150,15 +150,37 @@ static int help(struct sk_buff *skb, unsigned int protoff, data = ib_ptr; data_limit = ib_ptr + skb->len - dataoff; -/* strlen("\1DCC SENT t AAAAAAAA P\1\n")=24 -* 5+MINMATCHLEN+strlen("t AAAAAAAA P\1\n")=14 */ -while (data < data_limit - (19 +MINMATCHLEN )) { -if (memcmp (data,"\1DCC " ,5 )) { +/* Skip any whitespace */ +while (data < data_limit -10 ) { +if (*data ==' ' || *data =='\r' || *data =='\n' ) + data++; +else +break ; + } + +/* strlen("PRIVMSG x ")=10 */ +if (data < data_limit -10 ) { +if (strncasecmp ("PRIVMSG " , data,8 )) + goto out; + data +=8 ; + } + +/* strlen(" :\1DCC SENT t AAAAAAAA P\1\n")=26 +* 7+MINMATCHLEN+strlen("t AAAAAAAA P\1\n")=26 +*/ +while (data < data_limit - (21 +MINMATCHLEN )) { +/* Find first " :", the start of message */ +if (memcmp (data," :" ,2 )) { data++;continue ; } + data +=2 ; + +/* then check that place only for the DCC command */ +if (memcmp (data,"\1DCC " ,5 )) + goto out; data +=5 ; -/* we have at least (19+MINMATCHLEN)-5 bytes valid data left */ +/* we have at least (21+MINMATCHLEN)-(2+5) bytes valid data left */ iph =ip_hdr (skb); pr_debug("DCC found in master %pI4:%u %pI4:%u\n",
@@ -174,7 +196,7 @@ static int help(struct sk_buff *skb, unsigned int protoff,pr_debug ("DCC %s detected\n" , dccprotos[i]);/* we have at least -* (19+MINMATCHLEN)-5-dccprotos[i].matchlen bytes valid +* (21+MINMATCHLEN)-7-dccprotos[i].matchlen bytes valid * data left (== 14/13 bytes) */ if (parse_dcc (data, data_limit, &dcc_ip, &dcc_port, &addr_beg_p, &addr_end_p)) {
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 38/58 iavf: Fix cached head and tail value for iavf_get_tx_pending
In reply to Greg Kroah-HartmanFrom: Brett Creeley <[email protected]>
[ Upstream commit 809f23c0423a43266e47a7dc67e95b5cb4d1cbfc ]
The underlying hardware may or may not allow reading of the head or tail registers and it really makes no difference if we use the software cached values. So, always used the software cached values.
--- drivers/net/ethernet/intel/i40evf/i40e_txrx.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/net/ethernet/intel/i40evf/i40e_txrx.c +4 -1
@@ -115,8 +115,11 @@ u32 i40evf_get_tx_pending(struct i40e_ring *ring, bool in_sw) {u32 head, tail; +/* underlying hardware might not allow access and/or always return +* 0 for the head/tail registers so just use the cached values +*/ head = ring->next_to_clean; - tail =readl (ring->tail); + tail = ring->next_to_use;if (head != tail) return (head < tail) ?
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 39/58 ipvlan: Fix out-of-bound bugs caused by unset skb->mac_header
In reply to Greg Kroah-HartmanFrom: Lu Wei <[email protected]>
[ Upstream commit 81225b2ea161af48e093f58e8dfee6d705b16af4 ]
If an AF_PACKET socket is used to send packets through ipvlan and the default xmit function of the AF_PACKET socket is changed from dev_queue_xmit() to packet_direct_xmit() via setsockopt() with the option name of PACKET_QDISC_BYPASS, the skb->mac_header may not be reset and remains as the initial value of 65535, this may trigger slab-out-of-bounds bugs as following:
=================================================================
UG: KASAN: slab-out-of-bounds in ipvlan_xmit_mode_l2+0xdb/0x330 [ipvlan]
PU: 2 PID: 1768 Comm: raw_send Kdump: loaded Not tainted 6.0.0-rc4+ #6 ardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 all Trace:
print_address_description.constprop.0+0x1d/0x160 print_report.cold+0x4f/0x112 kasan_report+0xa3/0x130 ipvlan_xmit_mode_l2+0xdb/0x330 [ipvlan] ipvlan_start_xmit+0x29/0xa0 [ipvlan] __dev_direct_xmit+0x2e2/0x380 packet_direct_xmit+0x22/0x60 packet_snd+0x7c9/0xc40 sock_sendmsg+0x9a/0xa0 __sys_sendto+0x18a/0x230 __x64_sys_sendto+0x74/0x90 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd
The root cause is:
1. packet_snd() only reset skb->mac_header when sock->type is SOCK_RAW
and skb->protocol is not specified as in packet_parse_headers()
2. packet_direct_xmit() doesn't reset skb->mac_header as dev_queue_xmit()
In this case, skb->mac_header is 65535 when ipvlan_xmit_mode_l2() is called. So when ipvlan_xmit_mode_l2() gets mac header with eth_hdr() which use "skb->head + skb->mac_header", out-of-bound access occurs.
This patch replaces eth_hdr() with skb_eth_hdr() in ipvlan_xmit_mode_l2() and reset mac header in multicast to solve this out-of-bound bug.
--- drivers/net/ipvlan/ipvlan_core.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/net/ipvlan/ipvlan_core.c +4 -2
@@ -502,7 +502,6 @@ static int ipvlan_process_v6_outbound(struct sk_buff *skb)static int ipvlan_process_outbound (struct sk_buff *skb) { -struct ethhdr *ethh =eth_hdr (skb);int ret =NET_XMIT_DROP ;/* The ipvlan is a pseudo-L2 device, so the packets that we receive
@@ -512,6 +511,8 @@ static int ipvlan_process_outbound(struct sk_buff *skb)if (skb_mac_header_was_set (skb)) {/* In this mode we dont care about * multicast and broadcast traffic */ +struct ethhdr *ethh =eth_hdr (skb); +if (is_multicast_ether_addr (ethh->h_dest)) { pr_debug_ratelimited( "Dropped {multi|broad}cast of type=[%x]\n",
@@ -596,7 +597,7 @@ static int ipvlan_xmit_mode_l3(struct sk_buff *skb, struct net_device *dev)static int ipvlan_xmit_mode_l2 (struct sk_buff *skb,struct net_device *dev) {const struct ipvl_dev *ipvlan =netdev_priv (dev); -struct ethhdr *eth =eth_hdr (skb); +struct ethhdr *eth =skb_eth_hdr (skb);struct ipvl_addr *addr;void *lyr3h;int addr_type;
@@ -626,6 +627,7 @@ static int ipvlan_xmit_mode_l2(struct sk_buff *skb, struct net_device *dev)return dev_forward_skb (ipvlan->phy_dev, skb); }else if (is_multicast_ether_addr (eth->h_dest)) { +skb_reset_mac_header (skb);ipvlan_skb_crossing_ns (skb,NULL );ipvlan_multicast_enqueue (ipvlan->port, skb, true);return NET_XMIT_SUCCESS ;
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 40/58 net: team: Unsync device addresses on ndo_stop
In reply to Greg Kroah-HartmanFrom: Benjamin Poirier <[email protected]>
[ Upstream commit bd60234222b2fd5573526da7bcd422801f271f5f ]
Netdev drivers are expected to call dev_{uc,mc}_sync() in their ndo_set_rx_mode method and dev_{uc,mc}_unsync() in their ndo_stop method. This is mentioned in the kerneldoc for those dev_* functions.
The team driver calls dev_{uc,mc}_unsync() during ndo_uninit instead of ndo_stop. This is ineffective because address lists (dev->{uc,mc}) have already been emptied in unregister_netdevice_many() before ndo_uninit is called. This mistake can result in addresses being leftover on former team ports after a team device has been deleted; see test_LAG_cleanup() in the last patch in this series.
Add unsync calls at their expected location, team_close().
v3:
* When adding or deleting a port, only sync/unsync addresses if the team device is up. In other cases, it is taken care of at the right time by ndo_open/ndo_set_rx_mode/ndo_stop.
--- drivers/net/team/team.c | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-)
drivers/net/team/team.c +18 -6
@@ -1280,10 +1280,12 @@ static int team_port_add(struct team *team, struct net_device *port_dev, } } -netif_addr_lock_bh (dev); -dev_uc_sync_multiple (port_dev, dev); -dev_mc_sync_multiple (port_dev, dev); -netif_addr_unlock_bh (dev); +if (dev->flags &IFF_UP ) { +netif_addr_lock_bh (dev); +dev_uc_sync_multiple (port_dev, dev); +dev_mc_sync_multiple (port_dev, dev); +netif_addr_unlock_bh (dev); + } port->index =-1 ;list_add_tail_rcu (&port->list, &team->port_list);
@@ -1354,8 +1356,10 @@ static int team_port_del(struct team *team, struct net_device *port_dev)netdev_rx_handler_unregister (port_dev);team_port_disable_netpoll (port);vlan_vids_del_by_dev (port_dev, dev); -dev_uc_unsync (port_dev, dev); -dev_mc_unsync (port_dev, dev); +if (dev->flags &IFF_UP ) { +dev_uc_unsync (port_dev, dev); +dev_mc_unsync (port_dev, dev); + }dev_close (port_dev);team_port_leave (team, port);
@@ -1703,6 +1707,14 @@ static int team_open(struct net_device *dev)static int team_close (struct net_device *dev) { +struct team *team =netdev_priv (dev); +struct team_port *port; + +list_for_each_entry (port, &team->port_list, list) { +dev_uc_unsync (port->dev, dev); +dev_mc_unsync (port->dev, dev); + } +return 0 ; }
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 41/58 MIPS: lantiq: export clk_get_io() for lantiq_wdt.ko
In reply to Greg Kroah-HartmanFrom: Randy Dunlap <[email protected]>
[ Upstream commit 502550123bee6a2ffa438409b5b9aad4d6db3a8c ]
The lantiq WDT driver uses clk_get_io(), which is not exported, so export it to fix a build error:
ERROR: modpost: "clk_get_io" [drivers/watchdog/lantiq_wdt.ko] undefined!
--- arch/mips/lantiq/clk.c | 1 + 1 file changed, 1 insertion(+)
arch/mips/lantiq/clk.c +1 -0
@@ -52,6 +52,7 @@ struct clk *clk_get_io(void) {return &cpu_clk_generic[2 ]; } +EXPORT_SYMBOL_GPL (clk_get_io);struct clk *clk_get_ppe (void ) {
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 42/58 i40e: Fix VF set max MTU size
In reply to Greg Kroah-HartmanFrom: Michal Jaron <[email protected]>
[ Upstream commit 372539def2824c43b6afe2403045b140f65c5acc ]
Max MTU sent to VF is set to 0 during memory allocation. It cause that max MTU on VF is changed to IAVF_MAX_RXBUFFER and does not depend on data from HW.
Set max_mtu field in virtchnl_vf_resource struct to inform VF in GET_VF_RESOURCES msg what size should be max frame.
--- .../ethernet/intel/i40e/i40e_virtchnl_pf.c | 20 +++++++++++++++++++ 1 file changed, 20 insertions(+)
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c +20 -0
@@ -1712,6 +1712,25 @@ static void i40e_del_qch(struct i40e_vf *vf) } } +/** +* i40e_vc_get_max_frame_size +* @vf: pointer to the VF +* +* Max frame size is determined based on the current port's max frame size and +* whether a port VLAN is configured on this VF. The VF is not aware whether +* it's in a port VLAN so the PF needs to account for this in max frame size +* checks and sending the max frame size to the VF. +**/ +static u16 i40e_vc_get_max_frame_size (struct i40e_vf *vf) +{ +u16 max_frame_size = vf->pf->hw.phy.link_info.max_frame_size; + +if (vf->port_vlan_id) + max_frame_size -=VLAN_HLEN ; + +return max_frame_size; +} +/** * i40e_vc_get_vf_resources_msg * @vf: pointer to the VF info
@@ -1814,6 +1833,7 @@ static int i40e_vc_get_vf_resources_msg(struct i40e_vf *vf, u8 *msg) vfres->max_vectors = pf->hw.func_caps.num_msix_vectors_vf; vfres->rss_key_size =I40E_HKEY_ARRAY_SIZE ; vfres->rss_lut_size =I40E_VF_HLUT_ARRAY_SIZE ; + vfres->max_mtu =i40e_vc_get_max_frame_size (vf);if (vf->lan_vsi_idx) { vfres->vsi_res[0 ].vsi_id = vf->lan_vsi_id;
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 43/58 i40e: Fix set max_tx_rate when it is lower than 1 Mbps
In reply to Greg Kroah-HartmanFrom: Michal Jaron <[email protected]>
[ Upstream commit 198eb7e1b81d8ba676d0f4f120c092032ae69a8e ]
While converting max_tx_rate from bytes to Mbps, this value was set to 0, if the original value was lower than 125000 bytes (1 Mbps). This would cause no transmission rate limiting to occur. This happened due to lack of check of max_tx_rate against the 1 Mbps value for max_tx_rate and the following division by 125000. Fix this issue by adding a helper i40e_bw_bytes_to_mbits() which sets max_tx_rate to minimum usable value of 50 Mbps, if its value is less than 1 Mbps, otherwise do the required conversion by dividing by 125000.
--- drivers/net/ethernet/intel/i40e/i40e_main.c | 32 +++++++++++++++++---- 1 file changed, 26 insertions(+), 6 deletions(-)
drivers/net/ethernet/intel/i40e/i40e_main.c +26 -6
@@ -5487,6 +5487,26 @@ static int i40e_get_link_speed(struct i40e_vsi *vsi) } } +/** +* i40e_bw_bytes_to_mbits - Convert max_tx_rate from bytes to mbits +* @vsi: Pointer to vsi structure +* @max_tx_rate: max TX rate in bytes to be converted into Mbits +* +* Helper function to convert units before send to set BW limit +**/ +static u64 i40e_bw_bytes_to_mbits (struct i40e_vsi *vsi,u64 max_tx_rate) +{ +if (max_tx_rate <I40E_BW_MBPS_DIVISOR ) { +dev_warn (&vsi->back->pdev->dev, +"Setting max tx rate to minimum usable value of 50Mbps.\n" ); + max_tx_rate =I40E_BW_CREDIT_DIVISOR ; + }else { +do_div (max_tx_rate,I40E_BW_MBPS_DIVISOR ); + } + +return max_tx_rate; +} +/** * i40e_set_bw_limit - setup BW limit for Tx traffic based on max_tx_rate * @vsi: VSI to be configured
@@ -5509,10 +5529,10 @@ int i40e_set_bw_limit(struct i40e_vsi *vsi, u16 seid, u64 max_tx_rate) max_tx_rate, seid);return -EINVAL ; } -if (max_tx_rate && max_tx_rate <50 ) { +if (max_tx_rate && max_tx_rate <I40E_BW_CREDIT_DIVISOR ) {dev_warn (&pf->pdev->dev,"Setting max tx rate to minimum usable value of 50Mbps.\n" ); - max_tx_rate =50 ; + max_tx_rate =I40E_BW_CREDIT_DIVISOR ; }/* Tx rate credits are in values of 50Mbps, 0 is disabled */
@@ -6949,9 +6969,9 @@ static int i40e_setup_tc(struct net_device *netdev, void *type_data)if (pf->flags &I40E_FLAG_TC_MQPRIO ) {if (vsi->mqprio_qopt.max_rate[0 ]) { -u64 max_tx_rate = vsi->mqprio_qopt.max_rate[0 ]; +u64 max_tx_rate =i40e_bw_bytes_to_mbits (vsi, + vsi->mqprio_qopt.max_rate[0 ]); -do_div (max_tx_rate,I40E_BW_MBPS_DIVISOR ); ret =i40e_set_bw_limit (vsi, vsi->seid, max_tx_rate);if (!ret) {u64 credits = max_tx_rate;
@@ -9613,10 +9633,10 @@ static void i40e_rebuild(struct i40e_pf *pf, bool reinit, bool lock_acquired) }if (vsi->mqprio_qopt.max_rate[0 ]) { -u64 max_tx_rate = vsi->mqprio_qopt.max_rate[0 ]; +u64 max_tx_rate =i40e_bw_bytes_to_mbits (vsi, + vsi->mqprio_qopt.max_rate[0 ]);u64 credits =0 ; -do_div (max_tx_rate,I40E_BW_MBPS_DIVISOR ); ret =i40e_set_bw_limit (vsi, vsi->seid, max_tx_rate);if (ret) goto end_unlock;
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 44/58 of: mdio: Add of_node_put() when breaking out of for_each_xx
In reply to Greg Kroah-HartmanFrom: Liang He <[email protected]>
[ Upstream commit 1c48709e6d9d353acaaac1d8e33474756b121d78 ]
In of_mdiobus_register(), we should call of_node_put() for 'child' escaped out of for_each_available_child_of_node().
--- drivers/of/of_mdio.c | 1 + 1 file changed, 1 insertion(+)
drivers/of/of_mdio.c +1 -0
@@ -283,6 +283,7 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)return 0 ; unregister: +of_node_put (child);mdiobus_unregister (mdio);return rc; }
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 45/58 netfilter: ebtables: fix memory leak when blob is malformed
In reply to Greg Kroah-HartmanFrom: Florian Westphal <[email protected]>
[ Upstream commit 62ce44c4fff947eebdf10bb582267e686e6835c9 ]
The bug fix was incomplete, it "replaced" crash with a memory leak. The old code had an assignment to "ret" embedded into the conditional, restore this.
--- net/bridge/netfilter/ebtables.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
net/bridge/netfilter/ebtables.c +3 -1
@@ -1003,8 +1003,10 @@ static int do_replace_finish(struct net *net, struct ebt_replace *repl, goto free_iterate; } -if (repl->valid_hooks != t->valid_hooks) +if (repl->valid_hooks != t->valid_hooks) { + ret = -EINVAL ; goto free_unlock; + }if (repl->num_counters && repl->num_counters != t->private->nentries) { ret = -EINVAL ;
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 46/58 can: gs_usb: gs_can_open(): fix race dev->can.state condition
In reply to Greg Kroah-HartmanFrom: Marc Kleine-Budde <[email protected]>
[ Upstream commit 5440428b3da65408dba0241985acb7a05258b85e ]
The dev->can.state is set to CAN_STATE_ERROR_ACTIVE, after the device has been started. On busy networks the CAN controller might receive CAN frame between and go into an error state before the dev->can.state is assigned.
Assign dev->can.state before starting the controller to close the race window.
--- drivers/net/can/usb/gs_usb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/can/usb/gs_usb.c +2 -2
@@ -686,6 +686,7 @@ static int gs_can_open(struct net_device *netdev) flags |=GS_CAN_MODE_TRIPLE_SAMPLE ;/* finally start device */ + dev->can.state =CAN_STATE_ERROR_ACTIVE ; dm->mode =cpu_to_le32 (GS_CAN_MODE_START ); dm->flags =cpu_to_le32 (flags); rc = usb_control_msg(interface_to_usbdev(dev->iface),
@@ -702,13 +703,12 @@ static int gs_can_open(struct net_device *netdev)if (rc <0 ) {netdev_err (netdev,"Couldn't start device (err=%d)\n" , rc);kfree (dm); + dev->can.state =CAN_STATE_STOPPED ;return rc; }kfree (dm); - dev->can.state =CAN_STATE_ERROR_ACTIVE ; - parent->active_channels++;if (!(dev->can.ctrlmode &CAN_CTRLMODE_LISTENONLY ))netif_start_queue (netdev);
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 47/58 perf jit: Include program header in ELF files
In reply to Greg Kroah-HartmanFrom: Lieven Hey <[email protected]>
[ Upstream commit babd04386b1df8c364cdaa39ac0e54349502e1e5 ]
The missing header makes it hard for programs like elfutils to open these files.
--- tools/perf/util/genelf.c | 14 ++++++++++++++ tools/perf/util/genelf.h | 4 ++++ 2 files changed, 18 insertions(+)
tools/perf/util/genelf.c +14 -0
@@ -256,6 +256,7 @@ jit_write_elf(int fd, uint64_t load_addr, const char *sym,Elf_Data *d;Elf_Scn *scn;Elf_Ehdr *ehdr; +Elf_Phdr *phdr;Elf_Shdr *shdr;uint64_t eh_frame_base_offset;char *strsym =NULL ;
@@ -290,6 +291,19 @@ jit_write_elf(int fd, uint64_t load_addr, const char *sym, ehdr->e_version =EV_CURRENT ; ehdr->e_shstrndx= unwinding ?4 :2 ;/* shdr index for section name */ +/* +* setup program header +*/ + phdr =elf_newphdr (e,1 ); + phdr[0 ].p_type =PT_LOAD ; + phdr[0 ].p_offset =0 ; + phdr[0 ].p_vaddr =0 ; + phdr[0 ].p_paddr =0 ; + phdr[0 ].p_filesz = csize; + phdr[0 ].p_memsz = csize; + phdr[0 ].p_flags =PF_X |PF_R ; + phdr[0 ].p_align =8 ; +/* * setup text section */
tools/perf/util/genelf.h +4 -0
@@ -41,8 +41,10 @@ int jit_add_debug_info(Elf *e, uint64_t code_addr, void *debug, int nr_debug_ent#if GEN_ELF_CLASS ==ELFCLASS64 #define elf_newehdr elf64_newehdr +#define elf_newphdr elf64_newphdr#define elf_getshdr elf64_getshdr#define Elf_Ehdr Elf64_Ehdr +#define Elf_Phdr Elf64_Phdr#define Elf_Shdr Elf64_Shdr#define Elf_Sym Elf64_Sym#define ELF_ST_TYPE (a) ELF64_ST_TYPE(a)
@@ -50,8 +52,10 @@ int jit_add_debug_info(Elf *e, uint64_t code_addr, void *debug, int nr_debug_ent#define ELF_ST_VIS (a) ELF64_ST_VISIBILITY(a)#else #define elf_newehdr elf32_newehdr +#define elf_newphdr elf32_newphdr#define elf_getshdr elf32_getshdr#define Elf_Ehdr Elf32_Ehdr +#define Elf_Phdr Elf32_Phdr#define Elf_Shdr Elf32_Shdr#define Elf_Sym Elf32_Sym#define ELF_ST_TYPE (a) ELF32_ST_TYPE(a)
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 48/58 perf kcore_copy: Do not check /proc/modules is unchanged
In reply to Greg Kroah-HartmanFrom: Adrian Hunter <[email protected]>
[ Upstream commit 5b427df27b94aec1312cace48a746782a0925c53 ]
/proc/kallsyms and /proc/modules are compared before and after the copy in order to ensure no changes during the copy.
However /proc/modules also might change due to reference counts changing even though that does not make any difference.
Any modules loaded or unloaded should be visible in changes to kallsyms, so it is not necessary to check /proc/modules also anyway.
Remove the comparison checking that /proc/modules is unchanged.
--- tools/perf/util/symbol-elf.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-)
tools/perf/util/symbol-elf.c +2 -5
@@ -1871,8 +1871,8 @@ static int kcore_copy__compare_file(const char *from_dir, const char *to_dir,* unusual. One significant peculiarity is that the mapping (start -> pgoff) * is not the same for the kernel map and the modules map. That happens because * the data is copied adjacently whereas the original kcore has gaps. Finally, -* kallsyms and modules files are compared with their copies to check that -* modules have not been loaded or unloaded while the copies were taking place. +* kallsyms file is compared with its copy to check that modules have not been +* loaded or unloaded while the copies were taking place. * * Return: %0 on success, %-1 on failure. */
@@ -1935,9 +1935,6 @@ int kcore_copy(const char *from_dir, const char *to_dir) goto out_extract_close; } -if (kcore_copy__compare_file (from_dir, to_dir,"modules" )) - goto out_extract_close; -if (kcore_copy__compare_file (from_dir, to_dir,"kallsyms" )) goto out_extract_close;
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 49/58 net: sunhme: Fix packet reception for len < RX_COPY_THRESHOLD
In reply to Greg Kroah-HartmanFrom: Sean Anderson <[email protected]>
[ Upstream commit 878e2405710aacfeeb19364c300f38b7a9abfe8f ]
There is a separate receive path for small packets (under 256 bytes). Instead of allocating a new dma-capable skb to be used for the next packet, this path allocates a skb and copies the data into it (reusing the existing sbk for the next packet). There are two bytes of junk data at the beginning of every packet. I believe these are inserted in order to allow aligned DMA and IP headers. We skip over them using skb_reserve. Before copying over the data, we must use a barrier to ensure we see the whole packet. The current code only synchronizes len bytes, starting from the beginning of the packet, including the junk bytes. However, this leaves off the final two bytes in the packet. Synchronize the whole packet.
To reproduce this problem, ping a HME with a payload size between 17 and 214
$ ping -s 17 <hme_address>
which will complain rather loudly about the data mismatch. Small packets (below 60 bytes on the wire) do not have this issue. I suspect this is related to the padding added to increase the minimum packet size.
--- drivers/net/ethernet/sun/sunhme.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/ethernet/sun/sunhme.c +2 -2
@@ -2064,9 +2064,9 @@ static void happy_meal_rx(struct happy_meal *hp, struct net_device *dev)skb_reserve (copy_skb,2 );skb_put (copy_skb, len); -dma_sync_single_for_cpu (hp->dma_dev, dma_addr, len,DMA_FROM_DEVICE ); +dma_sync_single_for_cpu (hp->dma_dev, dma_addr, len +2 ,DMA_FROM_DEVICE );skb_copy_from_linear_data (skb, copy_skb->data, len); -dma_sync_single_for_device (hp->dma_dev, dma_addr, len,DMA_FROM_DEVICE ); +dma_sync_single_for_device (hp->dma_dev, dma_addr, len +2 ,DMA_FROM_DEVICE );/* Reuse original ring buffer. */ hme_write_rxd(hp, this, (RXFLAG_OWN|((RX_BUF_ALLOC_SIZE-RX_OFFSET)<<16)),
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 50/58 serial: Create uart_xmit_advance()
In reply to Greg Kroah-HartmanFrom: Ilpo Järvinen <[email protected]>
commit e77cab77f2cb3a1ca2ba8df4af45bb35617ac16d upstream.
A very common pattern in the drivers is to advance xmit tail index and do bookkeeping of Tx'ed characters. Create uart_xmit_advance() to handle it.
--- include/linux/serial_core.h | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
include/linux/serial_core.h +17 -0
@@ -306,6 +306,23 @@ struct uart_state {/* number of characters left in xmit buffer before we ask for more */ #define WAKEUP_CHARS 256 +/** +* uart_xmit_advance - Advance xmit buffer and account Tx'ed chars +* @up: uart_port structure describing the port +* @chars: number of characters sent +* +* This function advances the tail of circular xmit buffer by the number of +* @chars transmitted and handles accounting of transmitted bytes (into +* @up's icount.tx). +*/ +static inline void uart_xmit_advance (struct uart_port *up,unsigned int chars) +{ +struct circ_buf *xmit = &up->state->xmit; + + xmit->tail = (xmit->tail + chars) & (UART_XMIT_SIZE -1 ); + up->icount.tx += chars; +} +struct module ;struct tty_driver ;
Greg Kroah-Hartman
maintainerPATCH 51/58 serial: tegra: Use uart_xmit_advance(), fixes icount.tx accounting
In reply to Greg Kroah-HartmanFrom: Ilpo Järvinen <[email protected]>
commit 754f68044c7dd6c52534ba3e0f664830285c4b15 upstream.
DMA complete & stop paths did not correctly account Tx'ed characters into icount.tx. Using uart_xmit_advance() fixes the problem.
--- drivers/tty/serial/serial-tegra.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/tty/serial/serial-tegra.c +2 -3
@@ -398,7 +398,7 @@ static void tegra_uart_tx_dma_complete(v count = tup->tx_bytes_requested - state.residue;async_tx_ack (tup->tx_dma_desc);spin_lock_irqsave (&tup->uport.lock, flags); - xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE -1 ); +uart_xmit_advance (&tup->uport, count); tup->tx_in_progress =0 ;if (uart_circ_chars_pending (xmit) <WAKEUP_CHARS )uart_write_wakeup (&tup->uport);
@@ -482,7 +482,6 @@ static unsigned int tegra_uart_tx_empty(static void tegra_uart_stop_tx (struct uart_port *u) {struct tegra_uart_port *tup =to_tegra_uport (u); -struct circ_buf *xmit = &tup->uport.state->xmit;struct dma_tx_state state;unsigned int count;
@@ -493,7 +492,7 @@ static void tegra_uart_stop_tx(struct uadmaengine_tx_status (tup->tx_dma_chan, tup->tx_cookie, &state); count = tup->tx_bytes_requested - state.residue;async_tx_ack (tup->tx_dma_desc); - xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE -1 ); +uart_xmit_advance (&tup->uport, count); tup->tx_in_progress =0 ; }
Greg Kroah-Hartman
maintainerPATCH 52/58 s390/dasd: fix Oops in dasd_alias_get_start_dev due to missing pavgroup
In reply to Greg Kroah-HartmanFrom: Stefan Haberland <[email protected]>
commit db7ba07108a48c0f95b74fabbfd5d63e924f992d upstream.
Fix Oops in dasd_alias_get_start_dev() function caused by the pavgroup pointer being NULL.
The pavgroup pointer is checked on the entrance of the function but without the lcu->lock being held. Therefore there is a race window between dasd_alias_get_start_dev() and _lcu_update() which sets pavgroup to NULL with the lcu->lock held.
Fix by checking the pavgroup pointer with lcu->lock held.
--- drivers/s390/block/dasd_alias.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)
drivers/s390/block/dasd_alias.c +7 -2
@@ -675,12 +675,12 @@ int dasd_alias_remove_device(struct dasdstruct dasd_device *dasd_alias_get_start_dev (struct dasd_device *base_device) {struct dasd_eckd_private *alias_priv, *private = base_device->private; -struct alias_pav_group *group = private->pavgroup;struct alias_lcu *lcu = private->lcu;struct dasd_device *alias_device; +struct alias_pav_group *group;unsigned long flags; -if (!group || !lcu) +if (!lcu)return NULL ;if (lcu->pav ==NO_PAV || lcu->flags & (NEED_UAC_UPDATE |UPDATE_PENDING ))
@@ -697,6 +697,11 @@ struct dasd_device *dasd_alias_get_start }spin_lock_irqsave (&lcu->lock, flags); + group = private->pavgroup; +if (!group) { +spin_unlock_irqrestore (&lcu->lock, flags); +return NULL ; + } alias_device = group->next;if (!alias_device) {if (list_empty (&group->aliaslist)) {
Greg Kroah-Hartman
maintainerPATCH 53/58 Drivers: hv: Never allocate anything besides framebuffer from framebuffer memory region
In reply to Greg Kroah-HartmanFrom: Vitaly Kuznetsov <[email protected]>
[ Upstream commit f0880e2cb7e1f8039a048fdd01ce45ab77247221 ]
Passed through PCI device sometimes misbehave on Gen1 VMs when Hyper-V DRM driver is also loaded. Looking at IOMEM assignment, we can see e.g.
$ cat /proc/iomem
...
f8000000-fffbffff : PCI Bus 0000:00
f8000000-fbffffff : 0000:00:08.0
f8000000-f8001fff : bb8c4f33-2ba2-4808-9f7f-02f3b4da22fe
...
fe0000000-fffffffff : PCI Bus 0000:00
fe0000000-fe07fffff : bb8c4f33-2ba2-4808-9f7f-02f3b4da22fe
fe0000000-fe07fffff : 2ba2:00:02.0
fe0000000-fe07fffff : mlx4_corethe interesting part is the 'f8000000' region as it is actually the VM's framebuffer:
$ lspci -v ... 0000:00:08.0 VGA compatible controller: Microsoft Corporation Hyper-V virtual VGA (prog-if 00 [VGA controller]) Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at f8000000 (32-bit, non-prefetchable) [size=64M] ...
hv_vmbus: registering driver hyperv_drm
hyperv_drm 5620e0c7-8062-4dce-aeb7-520c7ef76171: [drm] Synthvid Version major 3, minor 5 hyperv_drm 0000:00:08.0: vgaarb: deactivate vga console
hyperv_drm 0000:00:08.0: BAR 0: can't reserve [mem 0xf8000000-0xfbffffff]
hyperv_drm 5620e0c7-8062-4dce-aeb7-520c7ef76171: [drm] Cannot request framebuffer, boot fb still active?
Note: "Cannot request framebuffer" is not a fatal error in hyperv_setup_gen1() as the code assumes there's some other framebuffer device there but we actually have some other PCI device (mlx4 in this case) config space there!
The problem appears to be that vmbus_allocate_mmio() can use dedicated framebuffer region to serve any MMIO request from any device. The semantics one might assume of a parameter named "fb_overlap_ok" aren't implemented because !fb_overlap_ok essentially has no effect. The existing semantics are really "prefer_fb_overlap". This patch implements the expected and needed semantics, which is to not allocate from the frame buffer space when !fb_overlap_ok.
Note, Gen2 VMs are usually unaffected by the issue because framebuffer region is already taken by EFI fb (in case kernel supports it) but Gen1 VMs may have this region unclaimed by the time Hyper-V PCI pass-through driver tries allocating MMIO space if Hyper-V DRM/FB drivers load after it. Devices can be brought up in any sequence so let's resolve the issue by always ignoring 'fb_mmio' region for non-FB requests, even if the region is unclaimed.
--- drivers/hv/vmbus_drv.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)
drivers/hv/vmbus_drv.c +9 -1
@@ -1846,7 +1846,7 @@ int vmbus_allocate_mmio(struct resource **new, struct hv_device *device_obj, bool fb_overlap_ok) {struct resource *iter, *shadow; -resource_size_t range_min, range_max, start; +resource_size_t range_min, range_max, start, end;const char *dev_n =dev_name (&device_obj->device);int retval;
@@ -1881,6 +1881,14 @@ int vmbus_allocate_mmio(struct resource **new, struct hv_device *device_obj, range_max = iter->end; start = (range_min + align -1 ) & ~(align -1 );for (; start + size -1 <= range_max; start += align) { + end = start + size -1 ; + +/* Skip the whole fb_mmio region if not fb_overlap_ok */ +if (!fb_overlap_ok && fb_mmio && + (((start >= fb_mmio->start) && (start <= fb_mmio->end)) || + ((end >= fb_mmio->start) && (end <= fb_mmio->end)))) +continue ; + shadow =__request_region (iter, start, size,NULL ,IORESOURCE_BUSY );if (!shadow)
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 54/58 drm/amd/display: Limit user regamma to a valid value
In reply to Greg Kroah-HartmanFrom: Yao Wang1 <[email protected]>
[ Upstream commit 3601d620f22e37740cf73f8278eabf9f2aa19eb7 ]
[Why]
For HDR mode, we get total 512 tf_point and after switching to SDR mode we actually get 400 tf_point and the rest of points(401~512) still use dirty value from HDR mode. We should limit the rest of the points to max value.
[How]
Limit the value when coordinates_x.x > 1, just like what we do in translate_from_linear_space for other re-gamma build paths.
--- drivers/gpu/drm/amd/display/modules/color/color_gamma.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/gpu/drm/amd/display/modules/color/color_gamma.c +4 -0
@@ -1206,6 +1206,7 @@ static void interpolate_user_regamma(uint32_t hw_points_num,struct fixed31_32 lut2;struct fixed31_32 delta_lut;struct fixed31_32 delta_index; +const struct fixed31_32 one =dc_fixpt_from_int (1 ); i =0 ;/* fixed_pt library has problems handling too small values */
@@ -1234,6 +1235,9 @@ static void interpolate_user_regamma(uint32_t hw_points_num, }else hw_x = coordinates_x[i].x; +if (dc_fixpt_le (one, hw_x)) + hw_x = one; + norm_x =dc_fixpt_mul (norm_factor, hw_x); index =dc_fixpt_floor (norm_x);if (index <0 || index >255 )
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 55/58 drm/rockchip: Fix return type of cdn_dp_connector_mode_valid
In reply to Greg Kroah-HartmanFrom: Nathan Huckleberry <[email protected]>
[ Upstream commit b0b9408f132623dc88e78adb5282f74e4b64bb57 ]
The mode_valid field in drm_connector_helper_funcs is expected to be of type:
enum drm_mode_status (* mode_valid) (struct drm_connector *connector,
struct drm_display_mode *mode);
The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition.
The return type of cdn_dp_connector_mode_valid should be changed from int to enum drm_mode_status.
--- drivers/gpu/drm/rockchip/cdn-dp-core.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/gpu/drm/rockchip/cdn-dp-core.c +3 -2
@@ -284,8 +284,9 @@ static int cdn_dp_connector_get_modes(struct drm_connector *connector)return ret; } -static int cdn_dp_connector_mode_valid (struct drm_connector *connector, -struct drm_display_mode *mode) +static enum drm_mode_status +cdn_dp_connector_mode_valid (struct drm_connector *connector, +struct drm_display_mode *mode) {struct cdn_dp_device *dp =connector_to_dp (connector);struct drm_display_info *display_info = &dp->connector.display_info;
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 56/58 workqueue: dont skip lockdep work dependency in cancel_work_sync()
In reply to Greg Kroah-HartmanFrom: Tetsuo Handa <[email protected]>
[ Upstream commit c0feea594e058223973db94c1c32a830c9807c86 ]
Like Hillf Danton mentioned
syzbot should have been able to catch cancel_work_sync() in work context by checking lockdep_map in __flush_work() for both flush and cancel.
in [1], being unable to report an obvious deadlock scenario shown below is broken. From locking dependency perspective, sync version of cancel request should behave as if flush request, for it waits for completion of work if that work has already started execution.
----------
#include <linux/module.h>
#include <linux/sched.h>
static DEFINE_MUTEX(mutex);
static void work_fn(struct work_struct *work)
{
schedule_timeout_uninterruptible(HZ / 5);
mutex_lock(&mutex);
mutex_unlock(&mutex);
}
static DECLARE_WORK(work, work_fn);
static int __init test_init(void)
{
schedule_work(&work);
schedule_timeout_uninterruptible(HZ / 10);
mutex_lock(&mutex);
cancel_work_sync(&work);
mutex_unlock(&mutex);
return -EINVAL;
}
module_init(test_init);
MODULE_LICENSE("GPL");
----------The check this patch restores was added by commit 0976dfc1d0cd80a4 ("workqueue: Catch more locking problems with flush_work()").
Then, lockdep's crossrelease feature was added by commit b09be676e0ff25bd ("locking/lockdep: Implement the 'crossrelease' feature"). As a result, this check was once removed by commit fd1a5b04dfb899f8 ("workqueue: Remove now redundant lock acquisitions wrt. workqueue flushes").
But lockdep's crossrelease feature was removed by commit e966eaeeb623f099 ("locking/lockdep: Remove the cross-release locking checks"). At this point, this check should have been restored.
Then, commit d6e89786bed977f3 ("workqueue: skip lockdep wq dependency in cancel_work_sync()") introduced a boolean flag in order to distinguish flush_work() and cancel_work_sync(), for checking "struct workqueue_struct" dependency when called from cancel_work_sync() was causing false positives.
Then, commit 87915adc3f0acdf0 ("workqueue: re-add lockdep dependencies for flushing") tried to restore "struct work_struct" dependency check, but by error checked this boolean flag. Like an example shown above indicates, "struct work_struct" dependency needs to be checked for both flush_work() and cancel_work_sync().
--- kernel/workqueue.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
kernel/workqueue.c +2 -4
@@ -2917,10 +2917,8 @@ static bool __flush_work(struct work_struct *work, bool from_cancel)if (WARN_ON (!work->func))return false; -if (!from_cancel) { -lock_map_acquire (&work->lockdep_map); -lock_map_release (&work->lockdep_map); - } +lock_map_acquire (&work->lockdep_map); +lock_map_release (&work->lockdep_map);if (start_flush_work (work, &barr, from_cancel)) {wait_for_completion (&barr.done);
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 57/58 ext4: make directory inode spreading reflect flexbg size
In reply to Greg Kroah-HartmanFrom: Jan Kara <[email protected]>
commit 613c5a85898d1cd44e68f28d65eccf64a8ace9cf upstream.
Currently the Orlov inode allocator searches for free inodes for a directory only in flex block groups with at most inodes_per_group/16 more directory inodes than average per flex block group. However with growing size of flex block group this becomes unnecessarily strict. Scale allowed difference from average directory count per flex block group with flex block group size as we do with other metrics.
--- fs/ext4/ialloc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
fs/ext4/ialloc.c +1 -1
@@ -505,7 +505,7 @@ static int find_group_orlov(struct super goto fallback; } - max_dirs = ndirs / ngroups + inodes_per_group /16 ; + max_dirs = ndirs / ngroups + inodes_per_group*flex_size /16 ; min_inodes = avefreei - inodes_per_group*flex_size /4 ;if (min_inodes <1 ) min_inodes =1 ;
Greg Kroah-Hartman
maintainerPATCH 58/58 usb: dwc3: pci: Allow Elkhart Lake to utilize DSM method for PM functionality
In reply to Greg Kroah-HartmanFrom: Raymond Tan <[email protected]>
commit a609ce2a13360d639b384b6ca783b38c1247f2db upstream.
Similar to some other IA platforms, Elkhart Lake too depends on the PMU register write to request transition of Dx power state.
Thus, we add the PCI_DEVICE_ID_INTEL_EHLLP to the list of devices that shall execute the ACPI _DSM method during D0/D3 sequence.
[[email protected]: included Fixes tag]
--- drivers/usb/dwc3/dwc3-pci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/usb/dwc3/dwc3-pci.c +2 -1
@@ -149,7 +149,8 @@ static int dwc3_pci_quirks(struct dwc3_pif (pdev->vendor ==PCI_VENDOR_ID_INTEL ) {if (pdev->device ==PCI_DEVICE_ID_INTEL_BXT || - pdev->device ==PCI_DEVICE_ID_INTEL_BXT_M ) { + pdev->device ==PCI_DEVICE_ID_INTEL_BXT_M || + pdev->device ==PCI_DEVICE_ID_INTEL_EHLLP ) {guid_parse (PCI_INTEL_BXT_DSM_GUID , &dwc->guid); dwc->has_dsm_for_pm = true; }
Hi!
Quoted 4 lines
This is the start of the stable review cycle for the 4.19.260 release. There are 58 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
CIP testing did not find any problems here:
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.19.y
Issues from review were sent separately.
Best regards,
Pavel
Signature · 2 lines
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Quoted 7 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 4.19.260 release. There are 58 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 28 Sep 2022 10:07:26 +0000. Anything received after that time might be too late.
Building riscv:defconfig ... failed
--------------
Error log:arch/riscv/kernel/signal.c: In function 'sys_rt_sigreturn':arch/riscv/kernel/signal.c:108:15: error: 'struct pt_regs' has no member named 'cause'; did you mean 'scause'?
108 | regs->cause = -1UL;
| ^~~~~
| scausemake[2]: *** [scripts/Makefile.build:303: arch/riscv/kernel/signal.o] Error 1 make[2]: *** Waiting for unfinished jobs....
make[1]: *** [Makefile:1073: arch/riscv/kernel] Error 2
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:146: sub-make] Error 2
Greg Kroah-Hartman
maintainerQuoted 15 lines · Guenter Roeck
Quoted 7 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 4.19.260 release. There are 58 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 28 Sep 2022 10:07:26 +0000. Anything received after that time might be too late.
Building riscv:defconfig ... failed
--------------
Error log:arch/riscv/kernel/signal.c: In function 'sys_rt_sigreturn':arch/riscv/kernel/signal.c:108:15: error: 'structpt_regs' has no member named 'cause'; did you mean 'scause'?
Quoted 8 lines
108 | regs->cause = -1UL; | ^~~~~ | scausemake[2]: *** [
scripts/Makefile.build:303:arch/riscv/kernel/signal.o] Error 1 make[2]: *** Waiting for unfinished jobs....
make[1]: *** [Makefile:1073:arch/riscv/kernel] Error 2
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:146: sub-make] Error 2
Will go drop the offending commit, thanks.
greg k-h
Quoted 9 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 4.19.260 release. There are 58 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 28 Sep 2022 10:07:26 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 9 lines
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.260-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-4.19.y
and the diffstat can be found below.thanks,
greg k-h
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah