docs/firmware: Update FW_JUMP documentation
PATCH v4 1/1 docs/firmware: Update FW_JUMP documentation
From: "Nylon.Chen" <[email protected]>
Add a tip for OpenSBI's FW_JUMP which helps
users avoid overwriting the kernel.
Signed-off-by Nylon Chen <[email protected]>
--- docs/firmware/fw_jump.md | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
docs/firmware/fw_jump.md +17 -0
@@ -41,6 +41,23 @@ follows: provided, then the OpenSBI firmware will pass the FDT address passed by the previous booting stage to the next booting stage. + When using the default *FW_JUMP_FDT_ADDR* with *PLATFORM=generic*, you must + ensure *FW_JUMP_FDT_ADDR* is set high enough to avoid overwriting the kernel. + You can use the following method. + + ``` + ${CROSS_COMPILE}objdump -h $KERNEL_ELF | sort -k 5,5 | awk '/^ +[0-9]+ / ' \ + | awk -n '{addr="0x"$3; size="0x"$5; printf "0x""%x\n",addr+size}' | \ + (( `tail -1` > 0x2200000 )) && echo fdt overlaps kernel, \ + increase FW_JUMP_FDT_ADDR + + + ${LLVM}objdump -h --show-lma $KERNEL_ELF | sort -k 5,5 | awk '/^ +[0-9]+ / ' \ + | awk -n '{addr="0x"$3; size="0x"$5; printf "0x""%x\n",addr+size}' | \ + (( `tail -1` > 0x2200000 )) && echo fdt overlaps kernel, \ + increase FW_JUMP_FDT_ADDR + ``` + *FW_JUMP* Example -----------------
Signature · 1 line
2.36.1
PATCH v4 1/1 docs/firmware: Update FW_JUMP documentation
Quoted 41 lines · Nylon Chen
From: "Nylon.Chen" <[email protected]>
Add a tip for OpenSBI's
FW_JUMPwhich helps
users avoid overwriting the kernel.Signed-off-by Nylon Chen <[email protected]>--- docs/firmware/fw_jump.md | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)docs/firmware/fw_jump.md +17
-0@@ -41,6 +41,23 @@ follows: provided, then the OpenSBI firmware will pass the FDT address passed by the previous booting stage to the next booting stage. + When using the default *FW_JUMP_FDT_ADDR* with *PLATFORM=generic*, you must + ensure *FW_JUMP_FDT_ADDR* is set high enough to avoid overwriting the kernel. + You can use the following method. + + ``` + ${CROSS_COMPILE}objdump -h $KERNEL_ELF | sort -k 5,5 | awk '/^ +[0-9]+ / ' \ + | awk -n '{addr="0x"$3; size="0x"$5; printf "0x""%x\n",addr+size}' | \ + (( `tail -1` > 0x2200000 )) && echo fdt overlaps kernel, \ + increase FW_JUMP_FDT_ADDR + + + ${LLVM}objdump -h --show-lma $KERNEL_ELF | sort -k 5,5 | awk '/^ +[0-9]+ / ' \ + | awk -n '{addr="0x"$3; size="0x"$5; printf "0x""%x\n",addr+size}' | \ + (( `tail -1` > 0x2200000 )) && echo fdt overlaps kernel, \ + increase FW_JUMP_FDT_ADDR + ``` + *FW_JUMP* Example -----------------Signature · 1 line
2.36.1
I'd still prefer we merge the two awks together into one awk invocation, but anyway
Reviewed-by Andrew Jones <[email protected]>