docs/firmware: Update FW_JUMP documentation
PATCH v2 1/1 docs/firmware: Update FW_JUMP documentation
From: "Nylon.Chen" <[email protected]>
Add a tip for OpenSBI's FW_JUMP which helps
users avoid overwriting the kernel.
--- docs/firmware/fw_jump.md | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
docs/firmware/fw_jump.md +17 -0
@@ -41,6 +41,23 @@ follows: provided, then the OpenSBI firmware will pass the FDT address passed by the previous booting stage to the next booting stage. + If your *PLATFORM=generic* and your *FW_JUMP_FDT_ADDR* is default, you must + ensure *FW_JUMP_FDT_ADDR* is set high enough to avoid overwriting the kernel + You can use the following method. + + ``` + ${CROSS_COMPILE}objdump -h $KERNEL_ELF | sort -k 5,5 | awk '/^ +[0-9]+ / ' \ + | awk -n '{addr="0x"$3; size="0x"$5; printf "0x""%x\n",addr+size}' | \ + if [[ `tail -n -1` -gt 0x2200000 ]]; then \ + echo fdt overlaps kernel, increase FW_JUMP_FDT_ADDR ; fi + + + ${LLVM}objdump -h --show-lma $KERNEL_ELF | sort -k 5,5 | awk '/^ +[0-9]+ / ' \ + | awk -n '{addr="0x"$3; size="0x"$5; printf "0x""%x\n",addr+size}' | \ + if [[ `tail -n -1` -gt 0x2200000 ]]; then \ + echo fdt overlaps kernel, increase FW_JUMP_FDT_ADDR ; fi + ``` + *FW_JUMP* Example -----------------
Signature · 1 line
2.36.1
PATCH v2 1/1 docs/firmware: Update FW_JUMP documentation
Quoted 15 lines · Nylon Chen
From: "Nylon.Chen" <[email protected]>
Add a tip for OpenSBI's
FW_JUMPwhich helps
users avoid overwriting the kernel.Signed-off-by Nylon Chen <[email protected]>--- docs/firmware/fw_jump.md | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)docs/firmware/fw_jump.md +0
-0
docs/firmware/fw_jump.md follows: · line 44
Quoted 4 lines
docs/firmware/fw_jump.md +1
-0@@ -41,6 +41,23 @@ follows: provided, then the OpenSBI firmware will pass the FDT address passed by the previous booting stage to the next booting stage. + If your *PLATFORM=generic* and your *FW_JUMP_FDT_ADDR* is default, you must
When using the default *FW_JUMP_FDT_ADDR* with *PLATFORM=generic*,
docs/firmware/fw_jump.md follows: · line 45
Quoted 1 line
docs/firmware/fw_jump.md +1
-0+ ensure *FW_JUMP_FDT_ADDR* is set high enough to avoid overwriting the kernel
Missing the period at the end of the sentence.
docs/firmware/fw_jump.md follows: · line 52
Quoted 7 lines
docs/firmware/fw_jump.md +7
-0+ You can use the following method. + + ``` + ${CROSS_COMPILE}objdump -h $KERNEL_ELF | sort -k 5,5 | awk '/^ +[0-9]+ / ' \ + | awk -n '{addr="0x"$3; size="0x"$5; printf "0x""%x\n",addr+size}' | \ + if [[ `tail -n -1` -gt 0x2200000 ]]; then \ + echo fdt overlaps kernel, increase FW_JUMP_FDT_ADDR ; fi
Should be able to merge the awks and drop the -n on tail and just use && instead of if-then. Also can use (( )) with normal math operators and don't need \ after |
${CROSS_COMPILE}objdump -h $KERNEL_ELF | sort -k 5,5 |
awk -n '/^ +[0-9]+ / {addr="0x"$3; size="0x"$5; printf "0x""%x\n",addr+size}' |
(( `tail -1` > 0x2200000 )) && echo fdt overlaps kernel, increase FW_JUMP_FDT_ADDRThanks,
drew
Quoted 14 lines
docs/firmware/fw_jump.md +8
-0+ + + ${LLVM}objdump -h --show-lma $KERNEL_ELF | sort -k 5,5 | awk '/^ +[0-9]+ / ' \ + | awk -n '{addr="0x"$3; size="0x"$5; printf "0x""%x\n",addr+size}' | \ + if [[ `tail -n -1` -gt 0x2200000 ]]; then \ + echo fdt overlaps kernel, increase FW_JUMP_FDT_ADDR ; fi + ``` + *FW_JUMP* Example -----------------Signature · 1 line
2.36.1