tests/kms_content_protection: Test Refactoring
v5 cover tests/kms_content_protection: Test Refactoring
Series includes patches to:
-Cleanup the test
-Convert the test to dynamic
Karthik B S (2):
tests/kms_content_protection: Test Cleanup tests/kms_content_protection: Convert test to dynamic
tests/kms_content_protection.c | 395 ++++++++++++++++++--------------- 1 file changed, 216 insertions(+), 179 deletions(-)
Signature · 1 line
2.22.0
PATCH v5 1/2 tests/kms_content_protection: Test Cleanup
This patch includes:
1.Add a modeset before checking output is HDCP capable.
Test currently skips on multidisplay MST because we're checking if output is HDCP capable before doing a modeset on the output.
2.Call igt_display_reset before starting the subtest. 3.test_fini function added to prepare test for converting to dynamic. 4.Remove redundant mode override.
5.Try other pipe/output combo for MST if failure is seen on one.
v2: -Update commit style in test_content_protection_cleanup.
v3: -Declare 'pipe' variable in this patch which otherwise causes
failure when patch is compiled individually.
--- tests/kms_content_protection.c | 182 +++++++++++++++++---------------- 1 file changed, 94 insertions(+), 88 deletions(-)
tests/kms_content_protection.c +94 -88
@@ -170,18 +170,15 @@ static void modeset_with_fb(const enum pipe pipe, igt_output_t *output, enum igt_commit_style s) {igt_display_t *display = &data.display; -drmModeModeInfo mode; +drmModeModeInfo *mode;igt_plane_t *primary; -igt_assert (kmstest_get_connector_default_mode ( - display->drm_fd, output->config.connector, &mode)); - -igt_output_override_mode (output, &mode); + mode =igt_output_get_mode (output);igt_output_set_pipe (output, pipe); primary =igt_output_get_plane_type (output,DRM_PLANE_TYPE_PRIMARY );igt_plane_set_fb (primary, &data.red); -igt_fb_set_size (&data.red, primary, mode.hdisplay, mode.vdisplay); +igt_fb_set_size (&data.red, primary, mode->hdisplay, mode->vdisplay);igt_display_commit2 (display, s);
@@ -317,90 +314,61 @@ static bool write_srm_as_fw(const __u8 *srm, int len) }static void test_content_protection_on_output (igt_output_t *output, +enum pipe pipe,enum igt_commit_style s,int content_type) {igt_display_t *display = &data.display; -igt_plane_t *primary; -enum pipe pipe;bool ret; -for_each_pipe (display, pipe) { -if (!igt_pipe_connector_valid (pipe, output)) -continue ; - -/* -* If previous subtest of connector failed, pipe -* attached to that connector is not released. -* Because of that we have to choose the non -* attached pipe for this subtest. -*/ -if (!igt_pipe_is_free (display, pipe)) -continue ; - -modeset_with_fb (pipe, output, s); -test_cp_enable_with_retry (output, s,3 , content_type, false, - false); - -if (data.cp_tests &CP_TYPE_CHANGE ) { -/* Type 1 -> Type 0 */ -test_cp_enable_with_retry (output, s,3 , -HDCP_CONTENT_TYPE_0 , false, - true); -/* Type 0 -> Type 1 */ -test_cp_enable_with_retry (output, s,3 , - content_type, false, - true); - } - -if (data.cp_tests &CP_MEI_RELOAD ) { -igt_assert_f (!igt_kmod_unload ("mei_hdcp" ,0 ), -"mei_hdcp unload failed" ); +test_cp_enable_with_retry (output, s,3 , content_type, false, + false); + +if (data.cp_tests &CP_TYPE_CHANGE ) { +/* Type 1 -> Type 0 */ +test_cp_enable_with_retry (output, s,3 , +HDCP_CONTENT_TYPE_0 , false, + true); +/* Type 0 -> Type 1 */ +test_cp_enable_with_retry (output, s,3 , + content_type, false, + true); + } -/* Expected to fail */ -test_cp_enable_with_retry (output, s,3 , - content_type, true, false); +if (data.cp_tests &CP_MEI_RELOAD ) { +igt_assert_f (!igt_kmod_unload ("mei_hdcp" ,0 ), +"mei_hdcp unload failed" ); -igt_assert_f (!igt_kmod_load ("mei_hdcp" ,NULL ), -"mei_hdcp load failed" ); +/* Expected to fail */ +test_cp_enable_with_retry (output, s,3 , + content_type, true, false); -/* Expected to pass */ -test_cp_enable_with_retry (output, s,3 , - content_type, false, false); - } +igt_assert_f (!igt_kmod_load ("mei_hdcp" ,NULL ), +"mei_hdcp load failed" ); -if (data.cp_tests &CP_LIC ) -test_cp_lic (output); +/* Expected to pass */ +test_cp_enable_with_retry (output, s,3 , + content_type, false, false); + } -if (data.cp_tests &CP_DPMS ) { -igt_pipe_set_prop_value (display, pipe, -IGT_CRTC_ACTIVE ,0 ); -igt_display_commit2 (display, s); +if (data.cp_tests &CP_LIC ) +test_cp_lic (output); -igt_pipe_set_prop_value (display, pipe, -IGT_CRTC_ACTIVE ,1 ); -igt_display_commit2 (display, s); +if (data.cp_tests &CP_DPMS ) { +igt_pipe_set_prop_value (display, pipe, +IGT_CRTC_ACTIVE ,0 ); +igt_display_commit2 (display, s); - ret =wait_for_prop_value (output,CP_ENABLED , -KERNEL_AUTH_TIME_ALLOWED_MSEC ); -if (!ret) -test_cp_enable_with_retry (output, s,2 , - content_type, false, - false); - } +igt_pipe_set_prop_value (display, pipe, +IGT_CRTC_ACTIVE ,1 ); +igt_display_commit2 (display, s); -test_cp_disable (output, s); - primary =igt_output_get_plane_type (output, -DRM_PLANE_TYPE_PRIMARY ); -igt_plane_set_fb (primary,NULL ); -igt_output_set_pipe (output,PIPE_NONE ); - -/* -* Testing a output with a pipe is enough for HDCP -* testing. No ROI in testing the connector with other -* pipes. So Break the loop on pipe. -*/ -break ; + ret =wait_for_prop_value (output,CP_ENABLED , +KERNEL_AUTH_TIME_ALLOWED_MSEC ); +if (!ret) +test_cp_enable_with_retry (output, s,2 , + content_type, false, + false); } }
@@ -458,7 +426,8 @@ static bool sink_hdcp2_capable(igt_output_t *output)return strstr (buf,"HDCP2.2" ); } -static void prepare_modeset_on_mst_output (igt_output_t *output) +static void +prepare_modeset_on_mst_output (igt_output_t *output) {drmModeModeInfo *mode;igt_plane_t *primary;
@@ -477,7 +446,8 @@ static void prepare_modeset_on_mst_output(igt_output_t *output)igt_plane_set_size (primary, width, height); } -static bool output_hdcp_capable (igt_output_t *output,int content_type) +static bool +output_hdcp_capable (igt_output_t *output,int content_type) {if (!output->props[IGT_CONNECTOR_CONTENT_PROTECTION ])return false;
@@ -499,22 +469,53 @@ static bool output_hdcp_capable(igt_output_t *output, int content_type)return true; } +static void +test_fini (igt_output_t *output,enum igt_commit_style s) +{ +igt_plane_t *primary; + +test_cp_disable (output, s); + primary =igt_output_get_plane_type (output, +DRM_PLANE_TYPE_PRIMARY ); +igt_plane_set_fb (primary,NULL ); +igt_output_set_pipe (output,PIPE_NONE ); +igt_display_commit2 (&data.display, s); +} +static void test_content_protection (enum igt_commit_style s,int content_type) {igt_display_t *display = &data.display;igt_output_t *output;int valid_tests =0 ; +enum pipe pipe;if (data.cp_tests &CP_MEI_RELOAD )igt_require_f (igt_kmod_is_loaded ("mei_hdcp" ),"mei_hdcp module is not loaded\n" );for_each_connected_output (display, output) { -if (!output_hdcp_capable (output, content_type)) -continue ; +for_each_pipe (display, pipe) { +if (!igt_pipe_connector_valid (pipe, output)) +continue ; + +igt_display_reset (display); +modeset_with_fb (pipe, output, s); + +if (!output_hdcp_capable (output, content_type)) +continue ; + +test_content_protection_on_output (output, pipe, s, content_type); +test_fini (output, s); + +/* +* Testing a output with a pipe is enough for HDCP +* testing. No ROI in testing the connector with other +* pipes. So Break the loop on pipe. +*/ +break ; + } -test_content_protection_on_output (output, s, content_type); valid_tests++; }
@@ -596,6 +597,7 @@ test_content_protection_mst(int content_type)igt_output_t *output;int valid_outputs =0 , dp_mst_outputs =0 , ret, count, max_pipe =0 , i;enum pipe pipe; +bool pipe_found;igt_output_t *mst_output[IGT_MAX_PIPES ], *hdcp_mst_output[IGT_MAX_PIPES ];for_each_pipe (display, pipe)
@@ -607,16 +609,20 @@ test_content_protection_mst(int content_type)if (!output_is_dp_mst (output, dp_mst_outputs))continue ; -igt_assert_f (igt_pipe_connector_valid (pipe, output),"Output-pipe combination invalid\n" ); + pipe_found = false; +for_each_pipe (display, pipe) { +if (igt_pipe_is_free (display, pipe) && +igt_pipe_connector_valid (pipe, output)) { + pipe_found = true; +break ; + } + } + +igt_assert_f (pipe_found,"No valid pipe found for %s\n" , output->name);igt_output_set_pipe (output, pipe);prepare_modeset_on_mst_output (output); mst_output[dp_mst_outputs++] = output; - - pipe++; - -if (pipe > max_pipe) -break ; }igt_require_f (dp_mst_outputs >1 ,"No DP MST set up with >= 2 outputs found in a single topology\n" );
@@ -694,7 +700,7 @@ static void test_content_protection_cleanup(void)continue ;igt_info ("CP Prop being UNDESIRED on %s\n" , output->name); -test_cp_disable (output,COMMIT_ATOMIC ); +test_cp_disable (output, display->is_atomic ?COMMIT_ATOMIC :COMMIT_LEGACY ); }igt_remove_fb (data.drm_fd, &data.red);
Signature · 1 line
2.22.0
Re: [igt-dev] [PATCH i-g-t v5 1/2] tests/kms_content_protection: Test Cleanup
Hi Karthik,
Quoted 8 lines · Karthik B S
This patch includes:
1.Add a modeset before checking output is HDCP capable.
Test currently skips on multidisplay MST because we're checking if output is HDCP capable before doing a modeset on the output.
2.Calligt_display_resetbefore starting the subtest. 3.test_fini function added to prepare test for converting to dynamic. 4.Remove redundant mode override.
5.Try other pipe/output combo for MST if failure is seen on one.
These looks like fix and cleanup, please split out part 1. and 5. into separate patch.
I will not comment on kms parts, only some things spotted, see below.
Quoted 171 lines
v2: -Update commit style in
test_content_protection_cleanup.v3: -Declare 'pipe' variable in this patch which otherwise causes
failure when patch is compiled individually.Signed-off-by Karthik B S <[email protected]>Reviewed-by Bhanuprakash Modem <[email protected]>--- tests/kms_content_protection.c | 182 +++++++++++++++++---------------- 1 file changed, 94 insertions(+), 88 deletions(-)tests/kms_content_protection.c +44
-76@@ -170,18 +170,15 @@ static void modeset_with_fb(const enum pipe pipe, igt_output_t *output, enum igt_commit_style s) {igt_display_t *display = &data.display; -drmModeModeInfo mode; +drmModeModeInfo *mode;igt_plane_t *primary; -igt_assert (kmstest_get_connector_default_mode ( - display->drm_fd, output->config.connector, &mode)); - -igt_output_override_mode (output, &mode); + mode =igt_output_get_mode (output);igt_output_set_pipe (output, pipe); primary =igt_output_get_plane_type (output,DRM_PLANE_TYPE_PRIMARY );igt_plane_set_fb (primary, &data.red); -igt_fb_set_size (&data.red, primary, mode.hdisplay, mode.vdisplay); +igt_fb_set_size (&data.red, primary, mode->hdisplay, mode->vdisplay);igt_display_commit2 (display, s);@@ -317,90 +314,61 @@ static bool write_srm_as_fw(const __u8 *srm, int len) }static void test_content_protection_on_output (igt_output_t *output, +enum pipe pipe,enum igt_commit_style s,int content_type) {igt_display_t *display = &data.display; -igt_plane_t *primary; -enum pipe pipe;bool ret; -for_each_pipe (display, pipe) { -if (!igt_pipe_connector_valid (pipe, output)) -continue ; - -/* -* If previous subtest of connector failed, pipe -* attached to that connector is not released. -* Because of that we have to choose the non -* attached pipe for this subtest. -*/ -if (!igt_pipe_is_free (display, pipe)) -continue ; - -modeset_with_fb (pipe, output, s); -test_cp_enable_with_retry (output, s,3 , content_type, false, - false); - -if (data.cp_tests &CP_TYPE_CHANGE ) { -/* Type 1 -> Type 0 */ -test_cp_enable_with_retry (output, s,3 , -HDCP_CONTENT_TYPE_0 , false, - true); -/* Type 0 -> Type 1 */ -test_cp_enable_with_retry (output, s,3 , - content_type, false, - true); - } - -if (data.cp_tests &CP_MEI_RELOAD ) { -igt_assert_f (!igt_kmod_unload ("mei_hdcp" ,0 ), -"mei_hdcp unload failed" ); +test_cp_enable_with_retry (output, s,3 , content_type, false, + false); + +if (data.cp_tests &CP_TYPE_CHANGE ) { +/* Type 1 -> Type 0 */ +test_cp_enable_with_retry (output, s,3 , +HDCP_CONTENT_TYPE_0 , false, + true); +/* Type 0 -> Type 1 */ +test_cp_enable_with_retry (output, s,3 , + content_type, false, + true); + } -/* Expected to fail */ -test_cp_enable_with_retry (output, s,3 , - content_type, true, false); +if (data.cp_tests &CP_MEI_RELOAD ) { +igt_assert_f (!igt_kmod_unload ("mei_hdcp" ,0 ), +"mei_hdcp unload failed" ); -igt_assert_f (!igt_kmod_load ("mei_hdcp" ,NULL ), -"mei_hdcp load failed" ); +/* Expected to fail */ +test_cp_enable_with_retry (output, s,3 , + content_type, true, false); -/* Expected to pass */ -test_cp_enable_with_retry (output, s,3 , - content_type, false, false); - } +igt_assert_f (!igt_kmod_load ("mei_hdcp" ,NULL ), +"mei_hdcp load failed" ); -if (data.cp_tests &CP_LIC ) -test_cp_lic (output); +/* Expected to pass */ +test_cp_enable_with_retry (output, s,3 , + content_type, false, false); + } -if (data.cp_tests &CP_DPMS ) { -igt_pipe_set_prop_value (display, pipe, -IGT_CRTC_ACTIVE ,0 ); -igt_display_commit2 (display, s); +if (data.cp_tests &CP_LIC ) +test_cp_lic (output); -igt_pipe_set_prop_value (display, pipe, -IGT_CRTC_ACTIVE ,1 ); -igt_display_commit2 (display, s); +if (data.cp_tests &CP_DPMS ) { +igt_pipe_set_prop_value (display, pipe, +IGT_CRTC_ACTIVE ,0 ); +igt_display_commit2 (display, s); - ret =wait_for_prop_value (output,CP_ENABLED , -KERNEL_AUTH_TIME_ALLOWED_MSEC ); -if (!ret) -test_cp_enable_with_retry (output, s,2 , - content_type, false, - false); - } +igt_pipe_set_prop_value (display, pipe, +IGT_CRTC_ACTIVE ,1 ); +igt_display_commit2 (display, s); -test_cp_disable (output, s); - primary =igt_output_get_plane_type (output, -DRM_PLANE_TYPE_PRIMARY ); -igt_plane_set_fb (primary,NULL ); -igt_output_set_pipe (output,PIPE_NONE ); - -/* -* Testing a output with a pipe is enough for HDCP -* testing. No ROI in testing the connector with other -* pipes. So Break the loop on pipe. -*/ -break ; + ret =wait_for_prop_value (output,CP_ENABLED , +KERNEL_AUTH_TIME_ALLOWED_MSEC ); +if (!ret) +test_cp_enable_with_retry (output, s,2 , + content_type, false, + false); } }
tests/kms_content_protection.c static bool sink_hdcp2_capable(igt_output_t *output) · line 430
Quoted 6 lines
tests/kms_content_protection.c +2
-1@@ -458,7 +426,8 @@ static bool sink_hdcp2_capable(igt_output_t *output)return strstr (buf,"HDCP2.2" ); } -static void prepare_modeset_on_mst_output (igt_output_t *output) +static void +prepare_modeset_on_mst_output (igt_output_t *output)
Please drop this and keep old line here. Do not mix cosmetic changes with functional cleanup. Smaller patches are easier to review.
tests/kms_content_protection.c static void prepare_modeset_on_mst_output(igt_output_t *output) · line 450
Quoted 10 lines
tests/kms_content_protection.c +2
-1{drmModeModeInfo *mode;igt_plane_t *primary;@@ -477,7 +446,8 @@ static void prepare_modeset_on_mst_output(igt_output_t *output)igt_plane_set_size (primary, width, height); } -static bool output_hdcp_capable (igt_output_t *output,int content_type) +static bool +output_hdcp_capable (igt_output_t *output,int content_type)
Same here.
tests/kms_content_protection.c static bool output_hdcp_capable(igt_output_t *output, int content_type) · line 473
Quoted 9 lines
tests/kms_content_protection.c +2
-0{if (!output->props[IGT_CONNECTOR_CONTENT_PROTECTION ])return false;@@ -499,22 +469,53 @@ static bool output_hdcp_capable(igt_output_t *output, int content_type)return true; } +static void +test_fini (igt_output_t *output,enum igt_commit_style s)
I would prefere to have it in one line but I see that below is used other convention so it may stay.
Quoted 27 lines
tests/kms_content_protection.c +13
-2+{ +igt_plane_t *primary; + +test_cp_disable (output, s); + primary =igt_output_get_plane_type (output, +DRM_PLANE_TYPE_PRIMARY ); +igt_plane_set_fb (primary,NULL ); +igt_output_set_pipe (output,PIPE_NONE ); +igt_display_commit2 (&data.display, s); +} +static void test_content_protection (enum igt_commit_style s,int content_type) {igt_display_t *display = &data.display;igt_output_t *output;int valid_tests =0 ; +enum pipe pipe;if (data.cp_tests &CP_MEI_RELOAD )igt_require_f (igt_kmod_is_loaded ("mei_hdcp" ),"mei_hdcp module is not loaded\n" );for_each_connected_output (display, output) { -if (!output_hdcp_capable (output, content_type)) -continue ; +for_each_pipe (display, pipe) {
tests/kms_content_protection.c static bool output_hdcp_capable(igt_output_t *output, int content_type) · line 508
Quoted 10 lines
tests/kms_content_protection.c +10
-0+if (!igt_pipe_connector_valid (pipe, output)) +continue ; + +igt_display_reset (display); +modeset_with_fb (pipe, output, s); + +if (!output_hdcp_capable (output, content_type)) +continue ; + +test_content_protection_on_output (output, pipe, s, content_type);
Here should be increasing valid_tests var, see below.
tests/kms_content_protection.c static bool output_hdcp_capable(igt_output_t *output, int content_type) · line 519
Quoted 12 lines
tests/kms_content_protection.c +9
-1+test_fini (output, s); + +/* +* Testing a output with a pipe is enough for HDCP +* testing. No ROI in testing the connector with other +* pipes. So Break the loop on pipe. +*/ +break ; + } -test_content_protection_on_output (output, s, content_type); valid_tests++;
--------------- ^
imho this one also should be moved after call totest_content_protection_on_output()
Regards,
Kamil
Quoted 49 lines
tests/kms_content_protection.c +12
-7}@@ -596,6 +597,7 @@ test_content_protection_mst(int content_type)igt_output_t *output;int valid_outputs =0 , dp_mst_outputs =0 , ret, count, max_pipe =0 , i;enum pipe pipe; +bool pipe_found;igt_output_t *mst_output[IGT_MAX_PIPES ], *hdcp_mst_output[IGT_MAX_PIPES ];for_each_pipe (display, pipe)@@ -607,16 +609,20 @@ test_content_protection_mst(int content_type)if (!output_is_dp_mst (output, dp_mst_outputs))continue ; -igt_assert_f (igt_pipe_connector_valid (pipe, output),"Output-pipe combination invalid\n" ); + pipe_found = false; +for_each_pipe (display, pipe) { +if (igt_pipe_is_free (display, pipe) && +igt_pipe_connector_valid (pipe, output)) { + pipe_found = true; +break ; + } + } + +igt_assert_f (pipe_found,"No valid pipe found for %s\n" , output->name);igt_output_set_pipe (output, pipe);prepare_modeset_on_mst_output (output); mst_output[dp_mst_outputs++] = output; - - pipe++; - -if (pipe > max_pipe) -break ; }igt_require_f (dp_mst_outputs >1 ,"No DP MST set up with >= 2 outputs found in a single topology\n" );@@ -694,7 +700,7 @@ static void test_content_protection_cleanup(void)continue ;igt_info ("CP Prop being UNDESIRED on %s\n" , output->name); -test_cp_disable (output,COMMIT_ATOMIC ); +test_cp_disable (output, display->is_atomic ?COMMIT_ATOMIC :COMMIT_LEGACY ); }igt_remove_fb (data.drm_fd, &data.red);Signature · 1 line
2.22.0
Re: [igt-dev] [PATCH i-g-t v5 1/2] tests/kms_content_protection: Test Cleanup
Quoted 1 line · Kamil Konieczny
Hi Karthik,
Hi Kamil,
Quoted 10 lines · Karthik B S
Quoted 8 lines
This patch includes:
1.Add a modeset before checking output is HDCP capable.
Test currently skips on multidisplay MST because we're checking if output is HDCP capable before doing a modeset on the output.
2.Calligt_display_resetbefore starting the subtest. 3.test_fini function added to prepare test for converting to dynamic. 4.Remove redundant mode override.
5.Try other pipe/output combo for MST if failure is seen on one.
Quoted 2 lines
These looks like fix and cleanup, please split out part 1. and 5. into separate patch.
Thank you for the review. Sure, will split this patch.
Quoted 176 lines
I will not comment on kms parts, only some things spotted, see below.
Quoted 173 lines
v2: -Update commit style in
test_content_protection_cleanup.v3: -Declare 'pipe' variable in this patch which otherwise causes
failure when patch is compiled individually.Signed-off-by Karthik B S <[email protected]>Reviewed-by Bhanuprakash Modem <[email protected]>--- tests/kms_content_protection.c | 182 +++++++++++++++++---------------- 1 file changed, 94 insertions(+), 88 deletions(-)tests/kms_content_protection.c +44
-76@@ -170,18 +170,15 @@ static void modeset_with_fb(const enum pipe pipe, igt_output_t *output, enum igt_commit_style s) {igt_display_t *display = &data.display; -drmModeModeInfo mode; +drmModeModeInfo *mode;igt_plane_t *primary; -igt_assert (kmstest_get_connector_default_mode ( - display->drm_fd, output->config.connector, &mode)); - -igt_output_override_mode (output, &mode); + mode =igt_output_get_mode (output);igt_output_set_pipe (output, pipe); primary =igt_output_get_plane_type (output,DRM_PLANE_TYPE_PRIMARY );igt_plane_set_fb (primary, &data.red); -igt_fb_set_size (&data.red, primary, mode.hdisplay, mode.vdisplay); +igt_fb_set_size (&data.red, primary, mode->hdisplay, mode->vdisplay);igt_display_commit2 (display, s);@@ -317,90 +314,61 @@ static bool write_srm_as_fw(const __u8 *srm, int len) }static void test_content_protection_on_output (igt_output_t *output, +enum pipe pipe,enum igt_commit_style s,int content_type) {igt_display_t *display = &data.display; -igt_plane_t *primary; -enum pipe pipe;bool ret; -for_each_pipe (display, pipe) { -if (!igt_pipe_connector_valid (pipe, output)) -continue ; - -/* -* If previous subtest of connector failed, pipe -* attached to that connector is not released. -* Because of that we have to choose the non -* attached pipe for this subtest. -*/ -if (!igt_pipe_is_free (display, pipe)) -continue ; - -modeset_with_fb (pipe, output, s); -test_cp_enable_with_retry (output, s,3 , content_type, false, - false); - -if (data.cp_tests &CP_TYPE_CHANGE ) { -/* Type 1 -> Type 0 */ -test_cp_enable_with_retry (output, s,3 , -HDCP_CONTENT_TYPE_0 , false, - true); -/* Type 0 -> Type 1 */ -test_cp_enable_with_retry (output, s,3 , - content_type, false, - true); - } - -if (data.cp_tests &CP_MEI_RELOAD ) { -igt_assert_f (!igt_kmod_unload ("mei_hdcp" ,0 ), -"mei_hdcp unload failed" ); +test_cp_enable_with_retry (output, s,3 , content_type, false, + false); + +if (data.cp_tests &CP_TYPE_CHANGE ) { +/* Type 1 -> Type 0 */ +test_cp_enable_with_retry (output, s,3 , +HDCP_CONTENT_TYPE_0 , false, + true); +/* Type 0 -> Type 1 */ +test_cp_enable_with_retry (output, s,3 , + content_type, false, + true); + } -/* Expected to fail */ -test_cp_enable_with_retry (output, s,3 , - content_type, true, false); +if (data.cp_tests &CP_MEI_RELOAD ) { +igt_assert_f (!igt_kmod_unload ("mei_hdcp" ,0 ), +"mei_hdcp unload failed" ); -igt_assert_f (!igt_kmod_load ("mei_hdcp" ,NULL ), -"mei_hdcp load failed" ); +/* Expected to fail */ +test_cp_enable_with_retry (output, s,3 , + content_type, true, false); -/* Expected to pass */ -test_cp_enable_with_retry (output, s,3 , - content_type, false, false); - } +igt_assert_f (!igt_kmod_load ("mei_hdcp" ,NULL ), +"mei_hdcp load failed" ); -if (data.cp_tests &CP_LIC ) -test_cp_lic (output); +/* Expected to pass */ +test_cp_enable_with_retry (output, s,3 , + content_type, false, false); + } -if (data.cp_tests &CP_DPMS ) { -igt_pipe_set_prop_value (display, pipe, -IGT_CRTC_ACTIVE ,0 ); -igt_display_commit2 (display, s); +if (data.cp_tests &CP_LIC ) +test_cp_lic (output); -igt_pipe_set_prop_value (display, pipe, -IGT_CRTC_ACTIVE ,1 ); -igt_display_commit2 (display, s); +if (data.cp_tests &CP_DPMS ) { +igt_pipe_set_prop_value (display, pipe, +IGT_CRTC_ACTIVE ,0 ); +igt_display_commit2 (display, s); - ret =wait_for_prop_value (output,CP_ENABLED , -KERNEL_AUTH_TIME_ALLOWED_MSEC ); -if (!ret) -test_cp_enable_with_retry (output, s,2 , - content_type, false, - false); - } +igt_pipe_set_prop_value (display, pipe, +IGT_CRTC_ACTIVE ,1 ); +igt_display_commit2 (display, s); -test_cp_disable (output, s); - primary =igt_output_get_plane_type (output, -DRM_PLANE_TYPE_PRIMARY ); -igt_plane_set_fb (primary,NULL ); -igt_output_set_pipe (output,PIPE_NONE ); - -/* -* Testing a output with a pipe is enough for HDCP -* testing. No ROI in testing the connector with other -* pipes. So Break the loop on pipe. -*/ -break ; + ret =wait_for_prop_value (output,CP_ENABLED , +KERNEL_AUTH_TIME_ALLOWED_MSEC ); +if (!ret) +test_cp_enable_with_retry (output, s,2 , + content_type, false, + false); } }@@ -458,7 +426,8 @@ static bool sink_hdcp2_capable(igt_output_t *output)return strstr (buf,"HDCP2.2" ); }
Quoted 6 lines
tests/kms_content_protection.c static bool sink_hdcp2_capable(igt_output_t *output) · line 430
Quoted 3 lines
tests/kms_content_protection.c +2
-1-static void prepare_modeset_on_mst_output (igt_output_t *output) +static void +prepare_modeset_on_mst_output (igt_output_t *output)Please drop this and keep old line here. Do not mix cosmetic changes with functional cleanup. Smaller patches are easier to review.
Sure, will update this.
Quoted 8 lines
Quoted 8 lines
tests/kms_content_protection.c +0
-0{drmModeModeInfo *mode;igt_plane_t *primary;@@ -477,7 +446,8 @@ static void prepare_modeset_on_mst_output(igt_output_t *output)igt_plane_set_size (primary, width, height); }
Quoted 4 lines
tests/kms_content_protection.c static void prepare_modeset_on_mst_output(igt_output_t *output) · line 450
Quoted 3 lines
tests/kms_content_protection.c +2
-1-static bool output_hdcp_capable (igt_output_t *output,int content_type) +static bool +output_hdcp_capable (igt_output_t *output,int content_type)Same here.
Sure.
Quoted 8 lines
Quoted 8 lines
tests/kms_content_protection.c +0
-0{if (!output->props[IGT_CONNECTOR_CONTENT_PROTECTION ])return false;@@ -499,22 +469,53 @@ static bool output_hdcp_capable(igt_output_t *output, int content_type)return true; }
Quoted 4 lines
tests/kms_content_protection.c static bool output_hdcp_capable(igt_output_t *output, int content_type) · line 473
Quoted 2 lines
tests/kms_content_protection.c +2
-0+static void +test_fini (igt_output_t *output,enum igt_commit_style s)I would prefere to have it in one line but I see that below is used other convention so it may stay.
Okay.
Quoted 50 lines
Quoted 28 lines
tests/kms_content_protection.c +13
-2+{ +igt_plane_t *primary; + +test_cp_disable (output, s); + primary =igt_output_get_plane_type (output, +DRM_PLANE_TYPE_PRIMARY ); +igt_plane_set_fb (primary,NULL ); +igt_output_set_pipe (output,PIPE_NONE ); +igt_display_commit2 (&data.display, s); +} +static void test_content_protection (enum igt_commit_style s,int content_type) {igt_display_t *display = &data.display;igt_output_t *output;int valid_tests =0 ; +enum pipe pipe;if (data.cp_tests &CP_MEI_RELOAD )igt_require_f (igt_kmod_is_loaded ("mei_hdcp" ),"mei_hdcp module is not loaded\n" );for_each_connected_output (display, output) { -if (!output_hdcp_capable (output, content_type)) -continue ; +for_each_pipe (display, pipe) {tests/kms_content_protection.c static bool output_hdcp_capable(igt_output_t *output, int content_type) · line 508
Quoted 10 lines
tests/kms_content_protection.c +10
-0+if (!igt_pipe_connector_valid (pipe, output)) +continue ; + +igt_display_reset (display); +modeset_with_fb (pipe, output, s); + +if (!output_hdcp_capable (output, content_type)) +continue ; + +test_content_protection_on_output (output, pipe, s, content_type);Here should be increasing
valid_testsvar, see below.Quoted 10 lines
tests/kms_content_protection.c +9
-0+test_fini (output, s); + +/* +* Testing a output with a pipe is enough for HDCP +* testing. No ROI in testing the connector with other +* pipes. So Break the loop on pipe. +*/ +break ; + }
Quoted 6 lines
tests/kms_content_protection.c static bool output_hdcp_capable(igt_output_t *output, int content_type) · line 519
Quoted 2 lines
tests/kms_content_protection.c +0
-1-test_content_protection_on_output (output, s, content_type); valid_tests++;--------------- ^
imho this one also should be moved after call to
test_content_protection_on_output()
Sure will move this.
Thanks,Karthik.B.S
Quoted 53 lines
Regards,
KamilQuoted 49 lines
tests/kms_content_protection.c +12
-7}@@ -596,6 +597,7 @@ test_content_protection_mst(int content_type)igt_output_t *output;int valid_outputs =0 , dp_mst_outputs =0 , ret, count, max_pipe =0 , i;enum pipe pipe; +bool pipe_found;igt_output_t *mst_output[IGT_MAX_PIPES ], *hdcp_mst_output[IGT_MAX_PIPES ];for_each_pipe (display, pipe)@@ -607,16 +609,20 @@ test_content_protection_mst(int content_type)if (!output_is_dp_mst (output, dp_mst_outputs))continue ; -igt_assert_f (igt_pipe_connector_valid (pipe, output),"Output-pipe combination invalid\n" ); + pipe_found = false; +for_each_pipe (display, pipe) { +if (igt_pipe_is_free (display, pipe) && +igt_pipe_connector_valid (pipe, output)) { + pipe_found = true; +break ; + } + } + +igt_assert_f (pipe_found,"No valid pipe found for %s\n" , output->name);igt_output_set_pipe (output, pipe);prepare_modeset_on_mst_output (output); mst_output[dp_mst_outputs++] = output; - - pipe++; - -if (pipe > max_pipe) -break ; }igt_require_f (dp_mst_outputs >1 ,"No DP MST set up with >= 2 outputs found in a single topology\n" );@@ -694,7 +700,7 @@ static void test_content_protection_cleanup(void)continue ;igt_info ("CP Prop being UNDESIRED on %s\n" , output->name); -test_cp_disable (output,COMMIT_ATOMIC ); +test_cp_disable (output, display->is_atomic ?COMMIT_ATOMIC :COMMIT_LEGACY ); }igt_remove_fb (data.drm_fd, &data.red);Signature · 1 line
2.22.0
PATCH v5 2/2 tests/kms_content_protection: Convert test to dynamic
In reply to Karthik B SCovert the existing subtests to dynamic subtests at pipe/output level.
--- tests/kms_content_protection.c | 219 +++++++++++++++++++-------------- 1 file changed, 125 insertions(+), 94 deletions(-)
tests/kms_content_protection.c +125 -94
@@ -487,13 +487,17 @@ test_content_protection(enum igt_commit_style s, int content_type) {igt_display_t *display = &data.display;igt_output_t *output; -int valid_tests =0 ;enum pipe pipe;if (data.cp_tests &CP_MEI_RELOAD )igt_require_f (igt_kmod_is_loaded ("mei_hdcp" ),"mei_hdcp module is not loaded\n" ); +if (data.cp_tests &CP_UEVENT ) { + data.uevent_monitor =igt_watch_uevents (); +igt_flush_uevents (data.uevent_monitor); + } +for_each_connected_output (display, output) {for_each_pipe (display, pipe) {if (!igt_pipe_connector_valid (pipe, output))
@@ -505,9 +509,10 @@ test_content_protection(enum igt_commit_style s, int content_type)if (!output_hdcp_capable (output, content_type))continue ; -test_content_protection_on_output (output, pipe, s, content_type); -test_fini (output, s); + igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipe), output->name) +test_content_protection_on_output (output, pipe, s, content_type); +test_fini (output, s);/* * Testing a output with a pipe is enough for HDCP * testing. No ROI in testing the connector with other
@@ -515,11 +520,10 @@ test_content_protection(enum igt_commit_style s, int content_type)*/ break ; } - - valid_tests++; } -igt_require_f (valid_tests,"No connector found with HDCP capability\n" ); +if (data.cp_tests &CP_UEVENT ) +igt_cleanup_uevents (data.uevent_monitor); }static int parse_path_blob (char *blob_data)
@@ -729,6 +733,94 @@ static void create_fbs(void) 0.f, 1.f, 0.f, &data.green); } +static const struct { +const char *desc; +const char *name; +unsigned int cp_tests; +bool content_type; +} subtests[] = { + { .desc ="Test content protection with atomic modesetting" , + .name ="atomic" , + .cp_tests =0 , + .content_type =HDCP_CONTENT_TYPE_0 + }, + { .desc ="Test content protection with DPMS ON/OFF during atomic modesetting." , + .name ="atomic-dpms" , + .cp_tests =CP_DPMS , + .content_type =HDCP_CONTENT_TYPE_0 + }, + { .desc ="Test for the integrity of link." , + .name ="LIC" , + .cp_tests =CP_LIC , + .content_type =HDCP_CONTENT_TYPE_0 , + }, + { .desc ="Test content protection with content type 1 " +"that can be handled only through HDCP2.2." , + .name ="type1" , + .cp_tests =0 , + .content_type =HDCP_CONTENT_TYPE_1 , + }, + { .desc ="Test the teardown and rebuild of the interface between " +"I915 and mei hdcp." , + .name ="mei_interface" , + .cp_tests =CP_MEI_RELOAD , + .content_type =HDCP_CONTENT_TYPE_1 , + }, + { .desc ="Test the content type change when the content protection already enabled" , + .name ="content_type_change" , + .cp_tests =CP_TYPE_CHANGE , + .content_type =HDCP_CONTENT_TYPE_1 , + }, + { .desc ="Test to detect the HDCP status change when we are reading the uevent " +"sent with the corresponding connector id and property id." , + .name ="uevent" , + .cp_tests =CP_UEVENT , + .content_type =HDCP_CONTENT_TYPE_0 , + }, +/* +* Testing the revocation check through SRM needs a HDCP sink with +* programmable Ksvs or we need a uAPI from kernel to read the +* connected HDCP sink's Ksv. With that we would be able to add that +* Ksv into a SRM and send in for revocation check. Since we dont have +* either of these options, we test SRM writing from userspace and +* validation of the same at kernel. Something is better than nothing. +*/ + { .desc ="This test writes the facsimile SRM into the /lib/firmware/ " +"and check the kernel parsing of it by invoking the hdcp authentication." , + .name ="srm" , + .cp_tests =0 , + .content_type =HDCP_CONTENT_TYPE_0 , + }, +}; + +static const struct { +const char *desc; +const char *name; +unsigned int cp_tests; +bool content_type; +} mst_subtests[] = { + { .desc ="Test Content protection(Type 0) over DP MST." , + .name ="dp-mst-type-0" , + .cp_tests =0 , + .content_type =HDCP_CONTENT_TYPE_0 + }, + { .desc ="Test Content protection(Type 0) over DP MST with LIC." , + .name ="dp-mst-lic-type-0" , + .cp_tests =CP_LIC , + .content_type =HDCP_CONTENT_TYPE_0 + }, + { .desc ="Test Content protection(Type 1) over DP MST." , + .name ="dp-mst-type-1" , + .cp_tests =0 , + .content_type =HDCP_CONTENT_TYPE_1 , + }, + { .desc ="Test Content protection(Type 1) over DP MST with LIC." , + .name ="dp-mst-lic-type-1" , + .cp_tests =CP_LIC , + .content_type =HDCP_CONTENT_TYPE_1 , + }, +}; +igt_main { igt_fixture {
@@ -739,107 +831,46 @@ igt_main }igt_describe ("Test content protection with legacy style commit." ); - igt_subtest("legacy") { + igt_subtest_with_dynamic("legacy") { data.cp_tests =0 ;test_content_protection (COMMIT_LEGACY ,HDCP_CONTENT_TYPE_0 ); } -igt_describe ("Test content protection with atomic modesetting" ); - igt_subtest("atomic") { -igt_require (data.display.is_atomic); - data.cp_tests =0 ; -test_content_protection (COMMIT_ATOMIC ,HDCP_CONTENT_TYPE_0 ); - } - -igt_describe ("Test content protection with DPMS ON/OFF during atomic modesetting." ); - igt_subtest("atomic-dpms") { -igt_require (data.display.is_atomic); - data.cp_tests =CP_DPMS ; -test_content_protection (COMMIT_ATOMIC ,HDCP_CONTENT_TYPE_0 ); - } - -igt_describe ("Test for the integrity of link." ); - igt_subtest("LIC") { -igt_require (data.display.is_atomic); - data.cp_tests =CP_LIC ; -test_content_protection (COMMIT_ATOMIC ,HDCP_CONTENT_TYPE_0 ); - } - -igt_describe ("Test content protection with content type 1 that " -"can be handled only through HDCP2.2." ); - igt_subtest("type1") { -igt_require (data.display.is_atomic); -test_content_protection (COMMIT_ATOMIC ,HDCP_CONTENT_TYPE_1 ); - } + igt_subtest_group { +igt_fixture + igt_require(data.display.is_atomic); -igt_describe ("Test the teardown and rebuild of the interface between " -"I915 and mei hdcp." ); - igt_subtest("mei_interface") { -igt_require (data.display.is_atomic); - data.cp_tests =CP_MEI_RELOAD ; -test_content_protection (COMMIT_ATOMIC ,HDCP_CONTENT_TYPE_1 ); - } +for (int i =0 ; i <ARRAY_SIZE (subtests); i++) { +igt_describe_f ("%s" , subtests[i].desc); -igt_describe ("Test the content type change when the content protection already " -"enabled." ); - igt_subtest("content_type_change") { -igt_require (data.display.is_atomic); - data.cp_tests =CP_TYPE_CHANGE ; -test_content_protection (COMMIT_ATOMIC ,HDCP_CONTENT_TYPE_1 ); - } + igt_subtest_with_dynamic(subtests[i].name) { + data.cp_tests = subtests[i].cp_tests; -igt_describe ("Test to detect the HDCP status change when we are reading the uevent " -"sent with the corresponding connector id and property id." ); - igt_subtest("uevent") { -igt_require (data.display.is_atomic); - data.cp_tests =CP_UEVENT ; - data.uevent_monitor =igt_watch_uevents (); -igt_flush_uevents (data.uevent_monitor); -test_content_protection (COMMIT_ATOMIC ,HDCP_CONTENT_TYPE_0 ); -igt_cleanup_uevents (data.uevent_monitor); - } +if (!strcmp (subtests[i].name,"srm" )) { +bool ret; -/* -* Testing the revocation check through SRM needs a HDCP sink with -* programmable Ksvs or we need a uAPI from kernel to read the -* connected HDCP sink's Ksv. With that we would be able to add that -* Ksv into a SRM and send in for revocation check. Since we dont have -* either of these options, we test SRM writing from userspace and -* validation of the same at kernel. Something is better than nothing. -*/ -igt_describe ("This test writes the facsimile SRM into the /lib/firmware/ " -"and check the kernel parsing of it by invoking the hdcp authentication." ); - igt_subtest("srm") { -bool ret; - -igt_require (data.display.is_atomic); - data.cp_tests =0 ; - ret =write_srm_as_fw ((const __u8 *)facsimile_srm, -sizeof (facsimile_srm)); -igt_assert_f (ret,"SRM update failed" ); -test_content_protection (COMMIT_ATOMIC ,HDCP_CONTENT_TYPE_0 ); - } + ret =write_srm_as_fw ((const __u8 *)facsimile_srm, +sizeof (facsimile_srm)); +igt_assert_f (ret,"SRM update failed" ); + } -igt_describe ("Test Content protection over DP MST" ); - igt_subtest("dp-mst-type-0") { -test_content_protection_mst (HDCP_CONTENT_TYPE_0 ); +test_content_protection (COMMIT_ATOMIC , subtests[i].content_type); + } + } } -igt_describe ("Test Content protection over DP MST with LIC" ); - igt_subtest("dp-mst-lic-type-0") { - data.cp_tests =CP_LIC ; -test_content_protection_mst (HDCP_CONTENT_TYPE_0 ); - } + igt_subtest_group { +igt_fixture + igt_require(data.display.is_atomic); -igt_describe ("Test Content protection over DP MST" ); - igt_subtest("dp-mst-type-1") { -test_content_protection_mst (HDCP_CONTENT_TYPE_1 ); - } +for (int i =0 ; i <ARRAY_SIZE (mst_subtests); i++) { +igt_describe_f ("%s" , mst_subtests[i].desc); -igt_describe ("Test Content protection over DP MST with LIC" ); - igt_subtest("dp-mst-lic-type-1") { - data.cp_tests =CP_LIC ; -test_content_protection_mst (HDCP_CONTENT_TYPE_1 ); + igt_subtest(mst_subtests[i].name) { + data.cp_tests = mst_subtests[i].cp_tests; +test_content_protection_mst (mst_subtests[i].content_type); + } + } } igt_fixture {
Signature · 1 line
2.22.0
Patchwork
CI[igt-dev] ✓ Fi.CI.BAT: success for tests/kms_content_protection: Test Refactoring (rev3)
In reply to Karthik B S== Series Details ==
== Series Details ==
Series: tests/kms_content_protection: Test Refactoring (rev3)
URL : https://patchwork.freedesktop.org/series/108484/
State : success
== Summary ==
CI Bug Log - changes from IGT_6667 -> IGTPW_7855
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/index.html
Participating hosts (45 -> 44)
------------------------------
Missing (1): fi-bdw-samus
Known issues
------------
Here are the changes found in IGTPW_7855 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@runner@aborted:
- fi-bdw-5557u: NOTRUN -> [FAIL][1] ([i915#4312])
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/fi-bdw-5557u/igt@[email protected]
#### Possible fixes ####
* igt@gem_exec_suspend@basic-s3@smem:
- {bat-adlm-1}: [DMESG-WARN][2] ([i915#2867]) -> [PASS][3]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6667/bat-adlm-1/igt@gem_exec_suspend@[email protected]
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/bat-adlm-1/igt@gem_exec_suspend@[email protected]
* igt@kms_pipe_crc_basic@suspend-read-crc@pipe-d-dp-2:
- {bat-dg2-11}: [FAIL][4] ([i915#6818]) -> [PASS][5] +1 similar issue
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6667/bat-dg2-11/igt@kms_pipe_crc_basic@[email protected]
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/bat-dg2-11/igt@kms_pipe_crc_basic@[email protected]
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[i915#2867]: https://gitlab.freedesktop.org/drm/intel/issues/2867
[i915#4312]: https://gitlab.freedesktop.org/drm/intel/issues/4312
[i915#6818]: https://gitlab.freedesktop.org/drm/intel/issues/6818
Build changes
-------------
* CI: CI-20190529 -> None
* IGT: IGT_6667 -> IGTPW_7855
CI-20190529: 20190529
CI_DRM_12193: 0f0716dcfd8446cde4391475c9c3656ca670b55f @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_7855: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/index.html
IGT_6667: 97ec0c0a3c6b9d02a4f63cf4ac699cee3dc6ac53 @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/index.html
Patchwork
CI[igt-dev] ✗ Fi.CI.IGT: failure for tests/kms_content_protection: Test Refactoring (rev3)
In reply to Karthik B S== Series Details ==
== Series Details ==
Series: tests/kms_content_protection: Test Refactoring (rev3)
URL : https://patchwork.freedesktop.org/series/108484/
State : failure
== Summary ==
CI Bug Log - changes from IGT_6667_full -> IGTPW_7855_full
====================================================
Summary
-------
**FAILURE**
Serious unknown changes coming with IGTPW_7855_full absolutely need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in IGTPW_7855_full, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/index.html
Participating hosts (7 -> 6)
------------------------------
Missing (1): shard-rkl
Possible new issues
-------------------
Here are the unknown changes that may have been introduced in IGTPW_7855_full:
### IGT changes ###
#### Possible regressions ####
* igt@kms_async_flips@crc@pipe-a-edp-1:
- shard-tglb: [PASS][1] -> [INCOMPLETE][2] +1 similar issue
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6667/shard-tglb2/igt@kms_async_flips@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-tglb8/igt@kms_async_flips@[email protected]
* {igt@kms_content_protection@lic@pipe-a-dp-1} (NEW):
- shard-apl: NOTRUN -> [INCOMPLETE][3] +3 similar issues
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-apl7/igt@kms_content_protection@[email protected]
* {igt@kms_content_protection@uevent@pipe-a-dp-1} (NEW):
- shard-apl: NOTRUN -> [FAIL][4]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-apl8/igt@kms_content_protection@[email protected]
* igt@kms_plane_alpha_blend@pipe-a-alpha-7efc:
- shard-tglb: NOTRUN -> [SKIP][5] +31 similar issues
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-tglb7/igt@[email protected]
* igt@kms_plane_alpha_blend@pipe-c-constant-alpha-mid:
- shard-iclb: NOTRUN -> [SKIP][6] +34 similar issues
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-iclb8/igt@[email protected]
#### Warnings ####
* igt@kms_content_protection@atomic-dpms:
- shard-tglb: [SKIP][7] ([i915#1063]) -> [SKIP][8] +6 similar issues
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6667/shard-tglb3/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-tglb7/igt@[email protected]
* igt@kms_content_protection@uevent:
- shard-iclb: [SKIP][9] ([fdo#109300] / [fdo#111066]) -> [SKIP][10] +6 similar issues
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6667/shard-iclb4/igt@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-iclb8/igt@[email protected]
New tests
---------
New tests have been introduced between IGT_6667_full and IGTPW_7855_full:
### New IGT tests (5) ###
* igt@kms_content_protection@atomic-dpms@pipe-a-dp-1:
- Statuses : 1 incomplete(s)
- Exec time: [0.0] s
* igt@kms_content_protection@atomic@pipe-a-dp-1:
- Statuses : 1 incomplete(s)
- Exec time: [0.0] s
* igt@kms_content_protection@lic@pipe-a-dp-1:
- Statuses : 1 incomplete(s)
- Exec time: [0.0] s
* igt@kms_content_protection@srm@pipe-a-dp-1:
- Statuses : 1 incomplete(s)
- Exec time: [0.0] s
* igt@kms_content_protection@uevent@pipe-a-dp-1:
- Statuses : 1 fail(s)
- Exec time: [34.73] s
Known issues
------------
Here are the changes found in IGTPW_7855_full that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_busy@close-race:
- shard-snb: [PASS][11] -> [TIMEOUT][12] ([i915#5748])
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6667/shard-snb6/igt@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-snb7/igt@[email protected]
* igt@gem_ccs@suspend-resume:
- shard-iclb: NOTRUN -> [SKIP][13] ([i915#5327])
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-iclb3/igt@[email protected]
* igt@gem_ctx_persistence@process:
- shard-snb: NOTRUN -> [SKIP][14] ([fdo#109271] / [i915#1099]) +1 similar issue
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-snb4/igt@[email protected]
* igt@gem_exec_balancer@parallel-keep-submit-fence:
- shard-iclb: [PASS][15] -> [SKIP][16] ([i915#4525])
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6667/shard-iclb4/igt@[email protected]
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-iclb3/igt@[email protected]
* igt@gem_exec_balancer@parallel-ordering:
- shard-iclb: NOTRUN -> [SKIP][17] ([i915#4525])
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-iclb5/igt@[email protected]
* igt@gem_exec_fair@basic-pace-share@rcs0:
- shard-glk: NOTRUN -> [FAIL][18] ([i915#2842])
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-glk3/igt@gem_exec_fair@[email protected]
- shard-tglb: NOTRUN -> [FAIL][19] ([i915#2842])
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-tglb3/igt@gem_exec_fair@[email protected]
* igt@gem_exec_fair@basic-throttle@rcs0:
- shard-glk: [PASS][20] -> [FAIL][21] ([i915#2842]) +2 similar issues
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6667/shard-glk5/igt@gem_exec_fair@[email protected]
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-glk2/igt@gem_exec_fair@[email protected]
* igt@gem_lmem_swapping@parallel-random:
- shard-iclb: NOTRUN -> [SKIP][22] ([i915#4613]) +2 similar issues
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-iclb7/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][23] ([i915#4613])
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-tglb3/igt@[email protected]
- shard-glk: NOTRUN -> [SKIP][24] ([fdo#109271] / [i915#4613])
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-glk3/igt@[email protected]
* igt@gem_pxp@regular-baseline-src-copy-readible:
- shard-tglb: NOTRUN -> [SKIP][25] ([i915#4270])
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-tglb7/igt@[email protected]
* igt@gem_pxp@verify-pxp-stale-buf-optout-execution:
- shard-iclb: NOTRUN -> [SKIP][26] ([i915#4270]) +1 similar issue
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-iclb6/igt@[email protected]
* igt@gem_softpin@evict-single-offset:
- shard-tglb: [PASS][27] -> [FAIL][28] ([i915#4171])
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6667/shard-tglb1/igt@[email protected]
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-tglb8/igt@[email protected]
* igt@gem_userptr_blits@access-control:
- shard-iclb: NOTRUN -> [SKIP][29] ([i915#3297])
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-iclb7/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][30] ([i915#3297])
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-tglb1/igt@[email protected]
* igt@gem_userptr_blits@input-checking:
- shard-iclb: NOTRUN -> [DMESG-WARN][31] ([i915#4991])
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-iclb8/igt@[email protected]
- shard-snb: NOTRUN -> [DMESG-WARN][32] ([i915#4991])
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-snb5/igt@[email protected]
- shard-tglb: NOTRUN -> [DMESG-WARN][33] ([i915#4991])
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-tglb5/igt@[email protected]
- shard-glk: NOTRUN -> [DMESG-WARN][34] ([i915#4991])
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-glk6/igt@[email protected]
* igt@gen7_exec_parse@basic-allocation:
- shard-iclb: NOTRUN -> [SKIP][35] ([fdo#109289]) +2 similar issues
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-iclb1/igt@[email protected]
* igt@gen7_exec_parse@load-register-reg:
- shard-tglb: NOTRUN -> [SKIP][36] ([fdo#109289])
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-tglb3/igt@[email protected]
* igt@gen9_exec_parse@bb-start-param:
- shard-iclb: NOTRUN -> [SKIP][37] ([i915#2856]) +1 similar issue
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-iclb2/igt@[email protected]
* igt@i915_selftest@mock@sanitycheck:
- shard-snb: [PASS][38] -> [SKIP][39] ([fdo#109271])
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6667/shard-snb5/igt@i915_selftest@[email protected]
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-snb6/igt@i915_selftest@[email protected]
* igt@kms_atomic@atomic_plane_damage:
- shard-iclb: NOTRUN -> [SKIP][40] ([i915#4765])
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-iclb8/igt@kms_atomic@atomic_plane_damage.html
* igt@kms_atomic_transition@plane-all-modeset-transition-fencing-internal-panels:
- shard-iclb: NOTRUN -> [SKIP][41] ([i915#1769] / [i915#3555])
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-iclb5/igt@kms_atomic_transition@plane-all-modeset-transition-fencing-internal-panels.html
* igt@kms_big_fb@4-tiled-8bpp-rotate-270:
- shard-iclb: NOTRUN -> [SKIP][42] ([i915#5286])
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-iclb3/igt@[email protected]
* igt@kms_big_fb@x-tiled-16bpp-rotate-270:
- shard-tglb: NOTRUN -> [SKIP][43] ([fdo#111614])
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-tglb1/igt@[email protected]
* igt@kms_big_fb@y-tiled-8bpp-rotate-90:
- shard-iclb: NOTRUN -> [SKIP][44] ([fdo#110725] / [fdo#111614]) +2 similar issues
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-iclb8/igt@[email protected]
* igt@kms_big_fb@yf-tiled-max-hw-stride-64bpp-rotate-180:
- shard-tglb: NOTRUN -> [SKIP][45] ([fdo#111615])
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-tglb7/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][46] ([fdo#110723])
[46]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-iclb8/igt@[email protected]
* igt@kms_ccs@pipe-a-bad-pixel-format-4_tiled_dg2_mc_ccs:
- shard-tglb: NOTRUN -> [SKIP][47] ([i915#6095])
[47]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-tglb1/igt@kms_ccs@pipe-a-bad-pixel-format-4_tiled_dg2_mc_ccs.html
* igt@kms_ccs@pipe-a-ccs-on-another-bo-y_tiled_gen12_rc_ccs_cc:
- shard-apl: NOTRUN -> [SKIP][48] ([fdo#109271] / [i915#3886]) +2 similar issues
[48]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-apl7/igt@kms_ccs@pipe-a-ccs-on-another-bo-y_tiled_gen12_rc_ccs_cc.html
* igt@kms_ccs@pipe-c-ccs-on-another-bo-y_tiled_gen12_rc_ccs_cc:
- shard-iclb: NOTRUN -> [SKIP][49] ([fdo#109278] / [i915#3886])
[49]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-iclb7/igt@kms_ccs@pipe-c-ccs-on-another-bo-y_tiled_gen12_rc_ccs_cc.html
* igt@kms_ccs@pipe-c-crc-sprite-planes-basic-4_tiled_dg2_mc_ccs:
- shard-tglb: NOTRUN -> [SKIP][50] ([i915#3689] / [i915#6095]) +1 similar issue
[50]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-tglb8/igt@kms_ccs@pipe-c-crc-sprite-planes-basic-4_tiled_dg2_mc_ccs.html
* igt@kms_ccs@pipe-d-bad-aux-stride-yf_tiled_ccs:
- shard-tglb: NOTRUN -> [SKIP][51] ([fdo#111615] / [i915#3689]) +1 similar issue
[51]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-tglb1/igt@kms_ccs@pipe-d-bad-aux-stride-yf_tiled_ccs.html
* igt@kms_cdclk@plane-scaling:
- shard-iclb: NOTRUN -> [SKIP][52] ([i915#3742])
[52]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-iclb3/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][53] ([i915#3742])
[53]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-tglb8/igt@[email protected]
* igt@kms_chamelium@dp-hpd-enable-disable-mode:
- shard-iclb: NOTRUN -> [SKIP][54] ([fdo#109284] / [fdo#111827]) +1 similar issue
[54]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-iclb8/igt@[email protected]
* igt@kms_chamelium@hdmi-crc-multiple:
- shard-glk: NOTRUN -> [SKIP][55] ([fdo#109271] / [fdo#111827])
[55]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-glk3/igt@[email protected]
- shard-snb: NOTRUN -> [SKIP][56] ([fdo#109271] / [fdo#111827])
[56]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-snb5/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][57] ([fdo#109284] / [fdo#111827])
[57]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-tglb3/igt@[email protected]
* igt@kms_chamelium@hdmi-hpd-storm:
- shard-apl: NOTRUN -> [SKIP][58] ([fdo#109271] / [fdo#111827]) +4 similar issues
[58]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-apl2/igt@[email protected]
* igt@kms_cursor_crc@cursor-random-512x512:
- shard-iclb: NOTRUN -> [SKIP][59] ([i915#3359])
[59]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-iclb8/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][60] ([i915#3359])
[60]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-tglb8/igt@[email protected]
* igt@kms_flip@2x-modeset-vs-vblank-race-interruptible:
- shard-iclb: NOTRUN -> [SKIP][61] ([fdo#109274]) +10 similar issues
[61]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-iclb3/igt@[email protected]
* igt@kms_flip@2x-wf_vblank-ts-check-interruptible:
- shard-tglb: NOTRUN -> [SKIP][62] ([fdo#109274] / [fdo#111825] / [i915#3637]) +1 similar issue
[62]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-tglb1/igt@kms_flip@2x-wf_vblank-ts-check-interruptible.html
* igt@kms_flip_scaled_crc@flip-32bpp-4tile-to-32bpp-4tiledg2rcccs-upscaling@pipe-a-default-mode:
- shard-iclb: NOTRUN -> [SKIP][63] ([i915#2672]) +6 similar issues
[63]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-iclb2/igt@kms_flip_scaled_crc@flip-32bpp-4tile-to-32bpp-4tiledg2rcccs-upscaling@pipe-a-default-mode.html
* igt@kms_flip_scaled_crc@flip-32bpp-ytileccs-to-64bpp-ytile-downscaling@pipe-a-default-mode:
- shard-iclb: [PASS][64] -> [SKIP][65] ([i915#3555])
[64]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6667/shard-iclb3/igt@kms_flip_scaled_crc@flip-32bpp-ytileccs-to-64bpp-ytile-downscaling@pipe-a-default-mode.html
[65]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-iclb2/igt@kms_flip_scaled_crc@flip-32bpp-ytileccs-to-64bpp-ytile-downscaling@pipe-a-default-mode.html
* igt@kms_flip_scaled_crc@flip-64bpp-4tile-to-32bpp-4tiledg2rcccs-downscaling@pipe-a-valid-mode:
- shard-iclb: NOTRUN -> [SKIP][66] ([i915#2587] / [i915#2672]) +3 similar issues
[66]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-iclb8/igt@kms_flip_scaled_crc@flip-64bpp-4tile-to-32bpp-4tiledg2rcccs-downscaling@pipe-a-valid-mode.html
* igt@kms_flip_scaled_crc@flip-64bpp-xtile-to-32bpp-xtile-downscaling@pipe-a-default-mode:
- shard-iclb: NOTRUN -> [SKIP][67] ([i915#3555]) +1 similar issue
[67]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-iclb2/igt@kms_flip_scaled_crc@flip-64bpp-xtile-to-32bpp-xtile-downscaling@pipe-a-default-mode.html
* igt@kms_flip_scaled_crc@flip-64bpp-yftile-to-32bpp-yftile-upscaling@pipe-a-valid-mode:
- shard-tglb: NOTRUN -> [SKIP][68] ([i915#2587] / [i915#2672]) +1 similar issue
[68]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-tglb3/igt@kms_flip_scaled_crc@flip-64bpp-yftile-to-32bpp-yftile-upscaling@pipe-a-valid-mode.html
* igt@kms_flip_scaled_crc@flip-64bpp-ytile-to-32bpp-ytilegen12rcccs-upscaling@pipe-a-default-mode:
- shard-iclb: NOTRUN -> [SKIP][69] ([i915#2672] / [i915#3555])
[69]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-iclb2/igt@kms_flip_scaled_crc@flip-64bpp-ytile-to-32bpp-ytilegen12rcccs-upscaling@pipe-a-default-mode.html
* igt@kms_frontbuffer_tracking@fbc-2p-primscrn-shrfb-msflip-blt:
- shard-iclb: NOTRUN -> [SKIP][70] ([fdo#109280]) +18 similar issues
[70]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-iclb6/igt@[email protected]
* igt@kms_frontbuffer_tracking@fbc-suspend:
- shard-apl: [PASS][71] -> [DMESG-WARN][72] ([i915#180]) +3 similar issues
[71]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6667/shard-apl8/igt@[email protected]
[72]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-apl1/igt@[email protected]
* igt@kms_frontbuffer_tracking@fbcpsr-rgb101010-draw-mmap-wc:
- shard-tglb: NOTRUN -> [SKIP][73] ([i915#6497]) +1 similar issue
[73]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-tglb5/igt@[email protected]
* igt@kms_frontbuffer_tracking@psr-2p-scndscrn-pri-indfb-draw-pwrite:
- shard-tglb: NOTRUN -> [SKIP][74] ([fdo#109280] / [fdo#111825]) +6 similar issues
[74]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-tglb5/igt@kms_frontbuffer_tracking@psr-2p-scndscrn-pri-indfb-draw-pwrite.html
* igt@kms_frontbuffer_tracking@psr-2p-scndscrn-spr-indfb-draw-render:
- shard-apl: NOTRUN -> [SKIP][75] ([fdo#109271]) +171 similar issues
[75]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-apl2/igt@kms_frontbuffer_tracking@psr-2p-scndscrn-spr-indfb-draw-render.html
* igt@kms_hdr@bpc-switch-dpms:
- shard-tglb: NOTRUN -> [SKIP][76] ([i915#3555])
[76]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-tglb7/igt@[email protected]
* igt@kms_plane_scaling@plane-downscale-with-modifiers-factor-0-5@pipe-d-edp-1:
- shard-tglb: NOTRUN -> [SKIP][77] ([i915#5176]) +3 similar issues
[77]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-tglb8/igt@kms_plane_scaling@[email protected]
* igt@kms_plane_scaling@plane-downscale-with-rotation-factor-0-5@pipe-b-edp-1:
- shard-iclb: NOTRUN -> [SKIP][78] ([i915#5176]) +5 similar issues
[78]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-iclb5/igt@kms_plane_scaling@[email protected]
* igt@kms_plane_scaling@planes-downscale-factor-0-25@pipe-a-edp-1:
- shard-iclb: NOTRUN -> [SKIP][79] ([i915#5235]) +2 similar issues
[79]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-iclb1/igt@kms_plane_scaling@[email protected]
* igt@kms_plane_scaling@planes-upscale-factor-0-25-downscale-factor-0-5@pipe-a-edp-1:
- shard-iclb: [PASS][80] -> [SKIP][81] ([i915#5235]) +5 similar issues
[80]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6667/shard-iclb6/igt@kms_plane_scaling@planes-upscale-factor-0-25-downscale-factor-0-5@pipe-a-edp-1.html
[81]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-iclb2/igt@kms_plane_scaling@planes-upscale-factor-0-25-downscale-factor-0-5@pipe-a-edp-1.html
* igt@kms_prime@basic-crc-hybrid:
- shard-iclb: NOTRUN -> [SKIP][82] ([i915#6524])
[82]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-iclb7/igt@[email protected]
* igt@kms_psr@psr2_primary_render:
- shard-tglb: NOTRUN -> [FAIL][83] ([i915#132] / [i915#3467])
[83]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-tglb8/igt@kms_psr@psr2_primary_render.html
- shard-iclb: NOTRUN -> [SKIP][84] ([fdo#109441])
[84]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-iclb3/igt@kms_psr@psr2_primary_render.html
* igt@kms_psr@psr2_sprite_plane_move:
- shard-iclb: [PASS][85] -> [SKIP][86] ([fdo#109441]) +2 similar issues
[85]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6667/shard-iclb2/igt@kms_psr@psr2_sprite_plane_move.html
[86]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-iclb4/igt@kms_psr@psr2_sprite_plane_move.html
* igt@kms_rotation_crc@primary-4-tiled-reflect-x-180:
- shard-iclb: NOTRUN -> [SKIP][87] ([i915#5289])
[87]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-iclb2/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][88] ([i915#5289])
[88]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-tglb2/igt@[email protected]
* igt@kms_vblank@pipe-d-query-forked-hang:
- shard-iclb: NOTRUN -> [SKIP][89] ([fdo#109278]) +10 similar issues
[89]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-iclb8/igt@[email protected]
* igt@nouveau_crc@pipe-b-source-outp-inactive:
- shard-tglb: NOTRUN -> [SKIP][90] ([i915#6971]) +46 similar issues
[90]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-tglb5/igt@[email protected]
* igt@nouveau_crc@pipe-d-ctx-flip-detection:
- shard-glk: NOTRUN -> [SKIP][91] ([fdo#109271]) +115 similar issues
[91]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-glk2/igt@[email protected]
* igt@prime_nv_pcopy@test3_5:
- shard-snb: NOTRUN -> [SKIP][92] ([fdo#109271]) +131 similar issues
[92]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-snb5/igt@prime_nv_pcopy@test3_5.html
* igt@prime_nv_test@i915_blt_fill_nv_read:
- shard-iclb: NOTRUN -> [SKIP][93] ([i915#6971]) +47 similar issues
[93]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-iclb3/igt@prime_nv_test@i915_blt_fill_nv_read.html
* igt@prime_vgem@fence-write-hang:
- shard-iclb: NOTRUN -> [SKIP][94] ([fdo#109295])
[94]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-iclb8/igt@[email protected]
* igt@sysfs_clients@split-50:
- shard-iclb: NOTRUN -> [SKIP][95] ([i915#2994])
[95]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-iclb8/igt@[email protected]
#### Possible fixes ####
* igt@gem_eio@in-flight-contexts-1us:
- shard-apl: [TIMEOUT][96] ([i915#3063]) -> [PASS][97]
[96]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6667/shard-apl3/igt@[email protected]
[97]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-apl2/igt@[email protected]
* igt@gem_exec_balancer@parallel-out-fence:
- shard-iclb: [SKIP][98] ([i915#4525]) -> [PASS][99] +2 similar issues
[98]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6667/shard-iclb3/igt@[email protected]
[99]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-iclb4/igt@[email protected]
* igt@gem_exec_fair@basic-pace@rcs0:
- shard-glk: [FAIL][100] ([i915#2842]) -> [PASS][101] +1 similar issue
[100]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6667/shard-glk3/igt@gem_exec_fair@[email protected]
[101]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-glk1/igt@gem_exec_fair@[email protected]
* igt@i915_pm_rps@engine-order:
- shard-apl: [FAIL][102] ([i915#6537]) -> [PASS][103]
[102]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6667/shard-apl3/igt@[email protected]
[103]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-apl2/igt@[email protected]
* igt@kms_big_fb@linear-32bpp-rotate-0:
- shard-glk: [DMESG-FAIL][104] ([i915#118] / [i915#1888]) -> [PASS][105]
[104]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6667/shard-glk2/igt@[email protected]
[105]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-glk6/igt@[email protected]
* igt@kms_cursor_legacy@flip-vs-cursor@atomic-transitions:
- shard-glk: [FAIL][106] ([i915#2346]) -> [PASS][107]
[106]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6667/shard-glk1/igt@kms_cursor_legacy@[email protected]
[107]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-glk3/igt@kms_cursor_legacy@[email protected]
* igt@kms_fbcon_fbt@fbc-suspend:
- shard-apl: [INCOMPLETE][108] ([i915#180] / [i915#1982] / [i915#4939]) -> [PASS][109]
[108]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6667/shard-apl8/igt@[email protected]
[109]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-apl3/igt@[email protected]
* igt@kms_flip_scaled_crc@flip-32bpp-ytile-to-64bpp-ytile-downscaling@pipe-a-default-mode:
- shard-iclb: [SKIP][110] ([i915#3555]) -> [PASS][111]
[110]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6667/shard-iclb2/igt@kms_flip_scaled_crc@flip-32bpp-ytile-to-64bpp-ytile-downscaling@pipe-a-default-mode.html
[111]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-iclb3/igt@kms_flip_scaled_crc@flip-32bpp-ytile-to-64bpp-ytile-downscaling@pipe-a-default-mode.html
* igt@kms_frontbuffer_tracking@fbc-rgb101010-draw-mmap-cpu:
- shard-snb: [SKIP][112] ([fdo#109271]) -> [PASS][113]
[112]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6667/shard-snb2/igt@[email protected]
[113]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-snb6/igt@[email protected]
* igt@kms_hdr@bpc-switch-suspend@pipe-a-dp-1:
- shard-apl: [DMESG-WARN][114] ([i915#180]) -> [PASS][115] +2 similar issues
[114]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6667/shard-apl6/igt@kms_hdr@[email protected]
[115]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-apl2/igt@kms_hdr@[email protected]
* igt@kms_plane_scaling@planes-downscale-factor-0-5@pipe-a-edp-1:
- shard-iclb: [SKIP][116] ([i915#5235]) -> [PASS][117] +2 similar issues
[116]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6667/shard-iclb2/igt@kms_plane_scaling@[email protected]
[117]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-iclb1/igt@kms_plane_scaling@[email protected]
* igt@kms_psr@psr2_primary_page_flip:
- shard-iclb: [SKIP][118] ([fdo#109441]) -> [PASS][119] +2 similar issues
[118]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6667/shard-iclb3/igt@kms_psr@psr2_primary_page_flip.html
[119]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-iclb2/igt@kms_psr@psr2_primary_page_flip.html
* igt@kms_psr_stress_test@flip-primary-invalidate-overlay:
- shard-iclb: [SKIP][120] ([i915#5519]) -> [PASS][121]
[120]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6667/shard-iclb4/igt@[email protected]
[121]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-iclb8/igt@[email protected]
#### Warnings ####
* igt@kms_content_protection@uevent:
- shard-tglb: [SKIP][122] ([i915#1063]) -> [SKIP][123] ([i915#6944])
[122]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6667/shard-tglb7/igt@[email protected]
[123]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-tglb7/igt@[email protected]
* igt@kms_psr2_sf@overlay-plane-move-continuous-exceed-fully-sf:
- shard-iclb: [SKIP][124] ([i915#658]) -> [SKIP][125] ([i915#2920])
[124]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6667/shard-iclb4/igt@[email protected]
[125]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-iclb2/igt@[email protected]
* igt@kms_psr2_sf@overlay-plane-move-continuous-sf:
- shard-iclb: [SKIP][126] ([i915#2920]) -> [SKIP][127] ([i915#658])
[126]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6667/shard-iclb2/igt@[email protected]
[127]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-iclb3/igt@[email protected]
* igt@kms_psr2_sf@overlay-plane-update-sf-dmg-area:
- shard-iclb: [SKIP][128] ([i915#2920]) -> [SKIP][129] ([fdo#111068] / [i915#658]) +1 similar issue
[128]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6667/shard-iclb2/igt@[email protected]
[129]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-iclb4/igt@[email protected]
* igt@runner@aborted:
- shard-apl: ([FAIL][130], [FAIL][131], [FAIL][132], [FAIL][133], [FAIL][134], [FAIL][135]) ([i915#180] / [i915#3002] / [i915#4312]) -> ([FAIL][136], [FAIL][137], [FAIL][138], [FAIL][139], [FAIL][140]) ([fdo#109271] / [i915#180] / [i915#4312])
[130]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6667/shard-apl8/igt@[email protected]
[131]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6667/shard-apl3/igt@[email protected]
[132]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6667/shard-apl6/igt@[email protected]
[133]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6667/shard-apl2/igt@[email protected]
[134]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6667/shard-apl8/igt@[email protected]
[135]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6667/shard-apl7/igt@[email protected]
[136]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-apl8/igt@[email protected]
[137]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-apl3/igt@[email protected]
[138]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-apl6/igt@[email protected]
[139]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-apl1/igt@[email protected]
[140]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/shard-apl1/igt@[email protected]
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109274]: https://bugs.freedesktop.org/show_bug.cgi?id=109274
[fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278
[fdo#109280]: https://bugs.freedesktop.org/show_bug.cgi?id=109280
[fdo#109284]: https://bugs.freedesktop.org/show_bug.cgi?id=109284
[fdo#109289]: https://bugs.freedesktop.org/show_bug.cgi?id=109289
[fdo#109295]: https://bugs.freedesktop.org/show_bug.cgi?id=109295
[fdo#109300]: https://bugs.freedesktop.org/show_bug.cgi?id=109300
[fdo#109441]: https://bugs.freedesktop.org/show_bug.cgi?id=109441
[fdo#110723]: https://bugs.freedesktop.org/show_bug.cgi?id=110723
[fdo#110725]: https://bugs.freedesktop.org/show_bug.cgi?id=110725
[fdo#111066]: https://bugs.freedesktop.org/show_bug.cgi?id=111066
[fdo#111068]: https://bugs.freedesktop.org/show_bug.cgi?id=111068
[fdo#111614]: https://bugs.freedesktop.org/show_bug.cgi?id=111614
[fdo#111615]: https://bugs.freedesktop.org/show_bug.cgi?id=111615
[fdo#111825]: https://bugs.freedesktop.org/show_bug.cgi?id=111825
[fdo#111827]: https://bugs.freedesktop.org/show_bug.cgi?id=111827
[i915#1063]: https://gitlab.freedesktop.org/drm/intel/issues/1063
[i915#1099]: https://gitlab.freedesktop.org/drm/intel/issues/1099
[i915#118]: https://gitlab.freedesktop.org/drm/intel/issues/118
[i915#132]: https://gitlab.freedesktop.org/drm/intel/issues/132
[i915#1769]: https://gitlab.freedesktop.org/drm/intel/issues/1769
[i915#180]: https://gitlab.freedesktop.org/drm/intel/issues/180
[i915#1888]: https://gitlab.freedesktop.org/drm/intel/issues/1888
[i915#1982]: https://gitlab.freedesktop.org/drm/intel/issues/1982
[i915#2346]: https://gitlab.freedesktop.org/drm/intel/issues/2346
[i915#2587]: https://gitlab.freedesktop.org/drm/intel/issues/2587
[i915#2672]: https://gitlab.freedesktop.org/drm/intel/issues/2672
[i915#2842]: https://gitlab.freedesktop.org/drm/intel/issues/2842
[i915#2856]: https://gitlab.freedesktop.org/drm/intel/issues/2856
[i915#2920]: https://gitlab.freedesktop.org/drm/intel/issues/2920
[i915#2994]: https://gitlab.freedesktop.org/drm/intel/issues/2994
[i915#3002]: https://gitlab.freedesktop.org/drm/intel/issues/3002
[i915#3063]: https://gitlab.freedesktop.org/drm/intel/issues/3063
[i915#3297]: https://gitlab.freedesktop.org/drm/intel/issues/3297
[i915#3359]: https://gitlab.freedesktop.org/drm/intel/issues/3359
[i915#3467]: https://gitlab.freedesktop.org/drm/intel/issues/3467
[i915#3555]: https://gitlab.freedesktop.org/drm/intel/issues/3555
[i915#3637]: https://gitlab.freedesktop.org/drm/intel/issues/3637
[i915#3689]: https://gitlab.freedesktop.org/drm/intel/issues/3689
[i915#3742]: https://gitlab.freedesktop.org/drm/intel/issues/3742
[i915#3886]: https://gitlab.freedesktop.org/drm/intel/issues/3886
[i915#4171]: https://gitlab.freedesktop.org/drm/intel/issues/4171
[i915#4270]: https://gitlab.freedesktop.org/drm/intel/issues/4270
[i915#4312]: https://gitlab.freedesktop.org/drm/intel/issues/4312
[i915#4525]: https://gitlab.freedesktop.org/drm/intel/issues/4525
[i915#4613]: https://gitlab.freedesktop.org/drm/intel/issues/4613
[i915#4765]: https://gitlab.freedesktop.org/drm/intel/issues/4765
[i915#4939]: https://gitlab.freedesktop.org/drm/intel/issues/4939
[i915#4991]: https://gitlab.freedesktop.org/drm/intel/issues/4991
[i915#5176]: https://gitlab.freedesktop.org/drm/intel/issues/5176
[i915#5235]: https://gitlab.freedesktop.org/drm/intel/issues/5235
[i915#5286]: https://gitlab.freedesktop.org/drm/intel/issues/5286
[i915#5289]: https://gitlab.freedesktop.org/drm/intel/issues/5289
[i915#5327]: https://gitlab.freedesktop.org/drm/intel/issues/5327
[i915#5519]: https://gitlab.freedesktop.org/drm/intel/issues/5519
[i915#5748]: https://gitlab.freedesktop.org/drm/intel/issues/5748
[i915#6095]: https://gitlab.freedesktop.org/drm/intel/issues/6095
[i915#6497]: https://gitlab.freedesktop.org/drm/intel/issues/6497
[i915#6524]: https://gitlab.freedesktop.org/drm/intel/issues/6524
[i915#6537]: https://gitlab.freedesktop.org/drm/intel/issues/6537
[i915#658]: https://gitlab.freedesktop.org/drm/intel/issues/658
[i915#6944]: https://gitlab.freedesktop.org/drm/intel/issues/6944
[i915#6971]: https://gitlab.freedesktop.org/drm/intel/issues/6971
Build changes
-------------
* CI: CI-20190529 -> None
* IGT: IGT_6667 -> IGTPW_7855
CI-20190529: 20190529
CI_DRM_12193: 0f0716dcfd8446cde4391475c9c3656ca670b55f @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_7855: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/index.html
IGT_6667: 97ec0c0a3c6b9d02a4f63cf4ac699cee3dc6ac53 @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_7855/index.html