Skip to contentSkip to conversation

Add IMX8 SCU GPIO support

PATCH New Shenwei Wang 1 participant 1 message Sep 29, 2022 Arm i.MX and Layerscape

lore
Share & tools
lore
#0 lore raw

cover Add IMX8 SCU GPIO support

The system controller (SCU) is the central unit to manage the resources on i.MX8 platforms. The SCU firmware provides a set of APIs to access the GPIO PINs on the SCU domain.

This patch series implements the standard GPIO driver over the SCU firmware APIs, so that the GPIOs on the SCU domain could be accessed like a local GPIO PINs.

Shenwei Wang (3):
dt-bindings: gpio: Add imx-scu gpio driver bindings
dt-bindings: firmware: imx: Add imx-scu gpio node
firmware: imx: add imx-scu GPIO driver

 .../devicetree/bindings/firmware/fsl,scu.yaml |   5 +
 .../bindings/gpio/fsl,imx8-scu-gpio.yaml      |  39 +++++
 drivers/firmware/imx/Kconfig                  |   6 +
 drivers/firmware/imx/Makefile                 |   1 +
 drivers/firmware/imx/imx-scu-gpio.c           | 139 ++++++++++++++++++
 5 files changed, 190 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpio/fsl,imx8-scu-gpio.yaml
 create mode 100644 drivers/firmware/imx/imx-scu-gpio.c

--
2.25.1