Skip to content

Add IMX8 SCU GPIO support

Shenwei Wang imx 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 3 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 3 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH v1 0/3] Add IMX8 SCU GPIO support

The system controller (SCU) is the central unit to manage the resources on i.MX8 platforms. The SCU firmware provides a set of APIs to access the GPIO PINs on the SCU domain.

This patch series implements the standard GPIO driver over the SCU firmware APIs, so that the GPIOs on the SCU domain could be accessed like a local GPIO PINs.

Shenwei Wang (3):
dt-bindings: gpio: Add imx-scu gpio driver bindings
dt-bindings: firmware: imx: Add imx-scu gpio node
firmware: imx: add imx-scu GPIO driver

 .../devicetree/bindings/firmware/fsl,scu.yaml |   5 +
 .../bindings/gpio/fsl,imx8-scu-gpio.yaml      |  39 +++++
 drivers/firmware/imx/Kconfig                  |   6 +
 drivers/firmware/imx/Makefile                 |   1 +
 drivers/firmware/imx/imx-scu-gpio.c           | 139 ++++++++++++++++++
 5 files changed, 190 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpio/fsl,imx8-scu-gpio.yaml
 create mode 100644 drivers/firmware/imx/imx-scu-gpio.c

--
2.25.1