add device Xiaomi Mi 6 (codename sagit) and board binding

Add initial support for Xiaomi Mi 6 phone (codename sagit)

Dzmitry Sankouski (2):
arm64: dts: qcom: sagit: add initial device tree for sagit
dt-bindings: arm: add xiaomi,sagit board based on msm8998 chip

 .../devicetree/bindings/arm/qcom.yaml         |   1 +
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 .../boot/dts/qcom/msm8998-xiaomi-sagit.dts    | 689 ++++++++++++++++++
 arch/arm64/boot/dts/qcom/pm8998.dtsi          |   6 +
 4 files changed, 697 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts

2.30.2

New device support - Xiaomi Mi6 phone

What works:
- storage
- usb
- power regulators

---
Changes for v4:
- regulators nodes renamed to match pattern 'regulators-[01]'
- duplicate cci1-default node deleted
- add state suffix to pinctrl
- fix compilation errors

 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 .../boot/dts/qcom/msm8998-xiaomi-sagit.dts    | 689 ++++++++++++++++++
 arch/arm64/boot/dts/qcom/pm8998.dtsi          |   6 +
 3 files changed, 696 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts

index 1d86a33de528..0460aabf1b59 100644
@@ -46,6 +46,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-oneplus-dumpling.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-sony-xperia-yoshino-lilac.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-sony-xperia-yoshino-maple.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-sony-xperia-yoshino-poplar.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-xiaomi-sagit.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-1000.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qrb5165-rb5.dtb

index d09f2954b6f9..4551af463081 100644
@@ -52,6 +52,12 @@ pm8998_pwrkey: pwrkey {
 				bias-pull-up;
 				linux,code = <KEY_POWER>;
 			};
+
+			pm8998_resin: resin {
+				compatible = "qcom,pm8941-resin";
+				bias-pull-up;
+				interrupts = <GIC_SPI 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+			};
 		};
 
 		pm8998_temp: temp-alarm@2400 {

2.30.2

add xiaomi,sagit board (Xiaomi Mi 6) binding

---
Changes for v4:
- remove unused 'sagit' compatible line

 Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
 1 file changed, 1 insertion(+)

index fb1d00bcc847..294075bafb97 100644
@@ -239,6 +239,7 @@ properties:
               - sony,xperia-lilac
               - sony,xperia-maple
               - sony,xperia-poplar
+              - xiaomi,sagit
           - const: qcom,msm8998
 
       - items:

2.30.2