Skip to contentSkip to conversation

Add support for T-HEAD C9xx PMU extensions

PATCH Superseded Heiko Stuebner 4 participants 16 messages Oct 4, 2022 – Oct 13, 2022 Arm/Allwinner sunXi SoC support

lore
Share & tools
lore
#0 lore raw

v5 cover Add support for T-HEAD C9xx PMU extensions

The T-HEAD C9XX cores implement functionality very similar to SSCOFPMF. Instead of implementing a separate interface into SBI as done in v1, we can add the C9XX tidbits with quite minimal overhead and leaverage the existing SBI pmu interface including giving access to the firmware counters.

The current only hickup is the detection override in sbi_hart, where I still need to find out why the MHPMCOUNTERs are not writeable at _that_ point of the boot, but with this series on top of openSBI 1.1 and the matching kernel perf patch I get reasonable results for example for:

perf stat -e cycles -e instructions -e L1-icache-load-misses -e L1-icache-loads ls

Performance counter stats for 'ls':

          17119496      cycles
           2867765      instructions              #    0.17  insn per cycle
             55929      L1-icache-load-misses     #    1.61% of all L1-icache accesses
           3467346      L1-icache-loads
       0.030156216 seconds time elapsed

       0.000000000 seconds user
       0.023496000 seconds sys

changes in v5:
- use csr_set, csr_clear in allwinner pmu functions
- expose hart_features struct into header
- make hart_features param for extension_init callback to allow platforms to override specific settings

changes in v4:
- use the new sbi_pmu_device structure for holding the overrides and extend it where needed

changes in v3:
- follow Atish's advice and implement an abstraction to not pollute the core pmu with cpu-specific variants

changes in v2:
- don't implement a separate interface but instead modify the sbi-pmu to allow the c9xx to use standard pmu interface

Heiko Stuebner (5):
lib: sbi_pmu: move pmu irq information into pmu itself
lib: sbi_hart: move hart_features struct to a public location
lib: sbi_platform: expose hart_features to extension_init callback
platform: generic: add extensions_init handler and platform-override
platform: generic: allwinner: add support for c9xx pmu

 include/sbi/sbi_hart.h                       |  11 ++
 include/sbi/sbi_platform.h                   |   8 +-
 include/sbi/sbi_pmu.h                        |   8 ++
 lib/sbi/sbi_hart.c                           |  43 +++----
 lib/sbi/sbi_pmu.c                            |  12 ++
 platform/generic/allwinner/sun20i-d1.c       |  60 +++++++++
 platform/generic/include/platform_override.h |   3 +
 platform/generic/include/thead_c9xx.h        | 127 +++++++++++++++++++
 platform/generic/platform.c                  |  10 ++
 9 files changed, 253 insertions(+), 29 deletions(-)
 create mode 100644 platform/generic/include/thead_c9xx.h
Signature · 1 line
2.35.1
#1 lore raw

PATCH v5 1/5 lib: sbi_pmu: move pmu irq information into pmu itself

Don't spread checking for pmu extensions through the code but instead introduce a sbi-pmu function that other code can call to get the correct information about the existence of the pmu interrupt.

Add a sbi_pmu_device override function to allow overridung this bit as well if needed.

---
 include/sbi/sbi_pmu.h |  8 ++++++++
 lib/sbi/sbi_hart.c    |  4 ++--
 lib/sbi/sbi_pmu.c     | 12 ++++++++++++
 3 files changed, 22 insertions(+), 2 deletions(-)
include/sbi/sbi_pmu.h +8 -0
index a2ce42d..c365243 100644
@@ -73,6 +73,11 @@ struct sbi_pmu_device {
 	 * Note: 0 <= counter_index < SBI_PMU_HW_CTR_MAX
 	 */
 	void (*hw_counter_disable_irq)(uint32_t counter_index);
+
+	/**
+	 * Custom function returning the machine-specific irq-bit.
+	 */
+	int (*hw_counter_irq_bit)(void);
 };
 
 /** Get the PMU platform device */
@@ -87,6 +92,9 @@ int sbi_pmu_init(struct sbi_scratch *scratch, bool cold_boot);
 /** Reset PMU during hart exit */
 void sbi_pmu_exit(struct sbi_scratch *scratch);
 
+/** Return the pmu irq bit depending on extension existence */
+int sbi_pmu_irq_bit(void);
+
 /**
  * Add the hardware event to counter mapping information. This should be called
  * from the platform code to update the mapping table.
lib/sbi/sbi_hart.c +2 -2
index 1294868..447f99e 100644
@@ -19,6 +19,7 @@
 #include <sbi/sbi_hart.h>
 #include <sbi/sbi_math.h>
 #include <sbi/sbi_platform.h>
+#include <sbi/sbi_pmu.h>
 #include <sbi/sbi_string.h>
 #include <sbi/sbi_trap.h>
 
@@ -208,8 +209,7 @@ static int delegate_traps(struct sbi_scratch *scratch)
 
 	/* Send M-mode interrupts and most exceptions to S-mode */
 	interrupts = MIP_SSIP | MIP_STIP | MIP_SEIP;
-	if (sbi_hart_has_extension(scratch, SBI_HART_EXT_SSCOFPMF))
-		interrupts |= MIP_LCOFIP;
+	interrupts |= sbi_pmu_irq_bit();
 
 	exceptions = (1U << CAUSE_MISALIGNED_FETCH) | (1U << CAUSE_BREAKPOINT) |
 		     (1U << CAUSE_USER_ECALL);
lib/sbi/sbi_pmu.c +12 -0
index 214d5e8..91d9ccc 100644
@@ -344,6 +344,18 @@ skip_inhibit_update:
 	return 0;
 }
 
+int sbi_pmu_irq_bit(void)
+{
+	struct sbi_scratch *scratch = sbi_scratch_thishart_ptr();
+
+	if (sbi_hart_has_extension(scratch, SBI_HART_EXT_SSCOFPMF))
+		return MIP_LCOFIP;
+	if (pmu_dev && pmu_dev->hw_counter_irq_bit)
+		return pmu_dev->hw_counter_irq_bit();
+
+	return 0;
+}
+
 static int pmu_ctr_start_fw(uint32_t cidx, uint32_t event_code,
 			    uint64_t ival, bool ival_update)
 {
Signature · 1 line
2.35.1
#2 lore raw

PATCH v5 1/5 lib: sbi_pmu: move pmu irq information into pmu itself

Quoted 6 lines · Heiko Stuebner

Don't spread checking for pmu extensions through the code but instead introduce a sbi-pmu function that other code can call to get the correct information about the existence of the pmu interrupt.

Quoted 6 lines

Add a sbi_pmu_device override function to allow overridung this bit as well if needed.

Looks good to me.

Regards,
Anup

Quoted 85 lines
---
 include/sbi/sbi_pmu.h |  8 ++++++++
 lib/sbi/sbi_hart.c    |  4 ++--
 lib/sbi/sbi_pmu.c     | 12 ++++++++++++
 3 files changed, 22 insertions(+), 2 deletions(-)
include/sbi/sbi_pmu.h +8 -0
index a2ce42d..c365243 100644
@@ -73,6 +73,11 @@ struct sbi_pmu_device {
         * Note: 0 <= counter_index < SBI_PMU_HW_CTR_MAX
         */
        void (*hw_counter_disable_irq)(uint32_t counter_index);
+
+       /**
+        * Custom function returning the machine-specific irq-bit.
+        */
+       int (*hw_counter_irq_bit)(void);
 };
 
 /** Get the PMU platform device */
@@ -87,6 +92,9 @@ int sbi_pmu_init(struct sbi_scratch *scratch, bool cold_boot);
 /** Reset PMU during hart exit */
 void sbi_pmu_exit(struct sbi_scratch *scratch);
 
+/** Return the pmu irq bit depending on extension existence */
+int sbi_pmu_irq_bit(void);
+
 /**
  * Add the hardware event to counter mapping information. This should be called
  * from the platform code to update the mapping table.
lib/sbi/sbi_hart.c +2 -2
index 1294868..447f99e 100644
@@ -19,6 +19,7 @@
 #include <sbi/sbi_hart.h>
 #include <sbi/sbi_math.h>
 #include <sbi/sbi_platform.h>
+#include <sbi/sbi_pmu.h>
 #include <sbi/sbi_string.h>
 #include <sbi/sbi_trap.h>
 
@@ -208,8 +209,7 @@ static int delegate_traps(struct sbi_scratch *scratch)
 
        /* Send M-mode interrupts and most exceptions to S-mode */
        interrupts = MIP_SSIP | MIP_STIP | MIP_SEIP;
-       if (sbi_hart_has_extension(scratch, SBI_HART_EXT_SSCOFPMF))
-               interrupts |= MIP_LCOFIP;
+       interrupts |= sbi_pmu_irq_bit();
 
        exceptions = (1U << CAUSE_MISALIGNED_FETCH) | (1U << CAUSE_BREAKPOINT) |
                     (1U << CAUSE_USER_ECALL);
lib/sbi/sbi_pmu.c +12 -1
index 214d5e8..91d9ccc 100644
@@ -344,6 +344,18 @@ skip_inhibit_update:
        return 0;
 }
 
+int sbi_pmu_irq_bit(void)
+{
+       struct sbi_scratch *scratch = sbi_scratch_thishart_ptr();
+
+       if (sbi_hart_has_extension(scratch, SBI_HART_EXT_SSCOFPMF))
+               return MIP_LCOFIP;
+       if (pmu_dev && pmu_dev->hw_counter_irq_bit)
+               return pmu_dev->hw_counter_irq_bit();
+
+       return 0;
+}
+
 static int pmu_ctr_start_fw(uint32_t cidx, uint32_t event_code,
                            uint64_t ival, bool ival_update)
 {
--

2.35.1

--
opensbi mailing list
opensbi at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/opensbi

#3 lore raw

PATCH v5 2/5 lib: sbi_hart: move hart_features struct to a public location

In reply to Heiko Stuebner

Platforms may need to override auto-detected hart features in their override functions. So move the hart_features struct to the sbi_hart.h header allowing us to pass it over to platform-handlers.

---
 include/sbi/sbi_hart.h | 11 +++++++++++
 lib/sbi/sbi_hart.c     | 36 +++++++++++++-----------------------
 2 files changed, 24 insertions(+), 23 deletions(-)
include/sbi/sbi_hart.h +11 -0
index 0032364..95b40e7 100644
@@ -41,6 +41,17 @@ enum sbi_hart_extensions {
 	SBI_HART_EXT_MAX,
 };
 
+struct sbi_hart_features {
+	bool detected;
+	int priv_version;
+	unsigned long extensions;
+	unsigned int pmp_count;
+	unsigned int pmp_addr_bits;
+	unsigned long pmp_gran;
+	unsigned int mhpm_count;
+	unsigned int mhpm_bits;
+};
+
 struct sbi_scratch;
 
 int sbi_hart_reinit(struct sbi_scratch *scratch);
lib/sbi/sbi_hart.c +13 -23
index 447f99e..d0a6295 100644
@@ -28,16 +28,6 @@ extern void __sbi_expected_trap_hext(void);
 
 void (*sbi_hart_expected_trap)(void) = &__sbi_expected_trap;
 
-struct hart_features {
-	bool detected;
-	int priv_version;
-	unsigned long extensions;
-	unsigned int pmp_count;
-	unsigned int pmp_addr_bits;
-	unsigned long pmp_gran;
-	unsigned int mhpm_count;
-	unsigned int mhpm_bits;
-};
 static unsigned long hart_features_offset;
 
 static void mstatus_init(struct sbi_scratch *scratch)
@@ -254,7 +244,7 @@ void sbi_hart_delegation_dump(struct sbi_scratch *scratch,
 
 unsigned int sbi_hart_mhpm_count(struct sbi_scratch *scratch)
 {
-	struct hart_features *hfeatures =
+	struct sbi_hart_features *hfeatures =
 			sbi_scratch_offset_ptr(scratch, hart_features_offset);
 
 	return hfeatures->mhpm_count;
@@ -262,7 +252,7 @@ unsigned int sbi_hart_mhpm_count(struct sbi_scratch *scratch)
 
 unsigned int sbi_hart_pmp_count(struct sbi_scratch *scratch)
 {
-	struct hart_features *hfeatures =
+	struct sbi_hart_features *hfeatures =
 			sbi_scratch_offset_ptr(scratch, hart_features_offset);
 
 	return hfeatures->pmp_count;
@@ -270,7 +260,7 @@ unsigned int sbi_hart_pmp_count(struct sbi_scratch *scratch)
 
 unsigned long sbi_hart_pmp_granularity(struct sbi_scratch *scratch)
 {
-	struct hart_features *hfeatures =
+	struct sbi_hart_features *hfeatures =
 			sbi_scratch_offset_ptr(scratch, hart_features_offset);
 
 	return hfeatures->pmp_gran;
@@ -278,7 +268,7 @@ unsigned long sbi_hart_pmp_granularity(struct sbi_scratch *scratch)
 
 unsigned int sbi_hart_pmp_addrbits(struct sbi_scratch *scratch)
 {
-	struct hart_features *hfeatures =
+	struct sbi_hart_features *hfeatures =
 			sbi_scratch_offset_ptr(scratch, hart_features_offset);
 
 	return hfeatures->pmp_addr_bits;
@@ -286,7 +276,7 @@ unsigned int sbi_hart_pmp_addrbits(struct sbi_scratch *scratch)
 
 unsigned int sbi_hart_mhpm_bits(struct sbi_scratch *scratch)
 {
-	struct hart_features *hfeatures =
+	struct sbi_hart_features *hfeatures =
 			sbi_scratch_offset_ptr(scratch, hart_features_offset);
 
 	return hfeatures->mhpm_bits;
@@ -336,7 +326,7 @@ int sbi_hart_pmp_configure(struct sbi_scratch *scratch)
 
 int sbi_hart_priv_version(struct sbi_scratch *scratch)
 {
-	struct hart_features *hfeatures =
+	struct sbi_hart_features *hfeatures =
 			sbi_scratch_offset_ptr(scratch, hart_features_offset);
 
 	return hfeatures->priv_version;
@@ -346,7 +336,7 @@ void sbi_hart_get_priv_version_str(struct sbi_scratch *scratch,
 				   char *version_str, int nvstr)
 {
 	char *temp;
-	struct hart_features *hfeatures =
+	struct sbi_hart_features *hfeatures =
 			sbi_scratch_offset_ptr(scratch, hart_features_offset);
 
 	switch (hfeatures->priv_version) {
@@ -368,7 +358,7 @@ void sbi_hart_get_priv_version_str(struct sbi_scratch *scratch,
 }
 
 static inline void __sbi_hart_update_extension(
-					struct hart_features *hfeatures,
+					struct sbi_hart_features *hfeatures,
 					enum sbi_hart_extensions ext,
 					bool enable)
 {
@@ -389,7 +379,7 @@ void sbi_hart_update_extension(struct sbi_scratch *scratch,
 			       enum sbi_hart_extensions ext,
 			       bool enable)
 {
-	struct hart_features *hfeatures =
+	struct sbi_hart_features *hfeatures =
 			sbi_scratch_offset_ptr(scratch, hart_features_offset);
 
 	__sbi_hart_update_extension(hfeatures, ext, enable);
@@ -405,7 +395,7 @@ void sbi_hart_update_extension(struct sbi_scratch *scratch,
 bool sbi_hart_has_extension(struct sbi_scratch *scratch,
 			    enum sbi_hart_extensions ext)
 {
-	struct hart_features *hfeatures =
+	struct sbi_hart_features *hfeatures =
 			sbi_scratch_offset_ptr(scratch, hart_features_offset);
 
 	if (hfeatures->extensions & BIT(ext))
@@ -453,7 +443,7 @@ static inline char *sbi_hart_extension_id2string(int ext)
 void sbi_hart_get_extensions_str(struct sbi_scratch *scratch,
 				 char *extensions_str, int nestr)
 {
-	struct hart_features *hfeatures =
+	struct sbi_hart_features *hfeatures =
 			sbi_scratch_offset_ptr(scratch, hart_features_offset);
 	int offset = 0, ext = 0;
 	char *temp;
@@ -539,7 +529,7 @@ static int hart_pmu_get_allowed_bits(void)
 static int hart_detect_features(struct sbi_scratch *scratch)
 {
 	struct sbi_trap_info trap = {0};
-	struct hart_features *hfeatures =
+	struct sbi_hart_features *hfeatures =
 		sbi_scratch_offset_ptr(scratch, hart_features_offset);
 	unsigned long val, oldval;
 	int rc;
@@ -718,7 +708,7 @@ int sbi_hart_init(struct sbi_scratch *scratch, bool cold_boot)
 			sbi_hart_expected_trap = &__sbi_expected_trap_hext;
 
 		hart_features_offset = sbi_scratch_alloc_offset(
-						sizeof(struct hart_features));
+					sizeof(struct sbi_hart_features));
 		if (!hart_features_offset)
 			return SBI_ENOMEM;
 	}
Signature · 1 line
2.35.1
#4 lore raw

PATCH v5 2/5 lib: sbi_hart: move hart_features struct to a public location

Quoted 8 lines · Heiko Stuebner

Platforms may need to override auto-detected hart features in their override functions. So move the hart_features struct to the sbi_hart.h header allowing us to pass it over to platform-handlers.

Looks good to me.

Regards,
Anup

Quoted 173 lines
---
 include/sbi/sbi_hart.h | 11 +++++++++++
 lib/sbi/sbi_hart.c     | 36 +++++++++++++-----------------------
 2 files changed, 24 insertions(+), 23 deletions(-)
include/sbi/sbi_hart.h +11 -0
index 0032364..95b40e7 100644
@@ -41,6 +41,17 @@ enum sbi_hart_extensions {
        SBI_HART_EXT_MAX,
 };
 
+struct sbi_hart_features {
+       bool detected;
+       int priv_version;
+       unsigned long extensions;
+       unsigned int pmp_count;
+       unsigned int pmp_addr_bits;
+       unsigned long pmp_gran;
+       unsigned int mhpm_count;
+       unsigned int mhpm_bits;
+};
+
 struct sbi_scratch;
 
 int sbi_hart_reinit(struct sbi_scratch *scratch);
lib/sbi/sbi_hart.c +13 -24
index 447f99e..d0a6295 100644
@@ -28,16 +28,6 @@ extern void __sbi_expected_trap_hext(void);
 
 void (*sbi_hart_expected_trap)(void) = &__sbi_expected_trap;
 
-struct hart_features {
-       bool detected;
-       int priv_version;
-       unsigned long extensions;
-       unsigned int pmp_count;
-       unsigned int pmp_addr_bits;
-       unsigned long pmp_gran;
-       unsigned int mhpm_count;
-       unsigned int mhpm_bits;
-};
 static unsigned long hart_features_offset;
 
 static void mstatus_init(struct sbi_scratch *scratch)
@@ -254,7 +244,7 @@ void sbi_hart_delegation_dump(struct sbi_scratch *scratch,
 
 unsigned int sbi_hart_mhpm_count(struct sbi_scratch *scratch)
 {
-       struct hart_features *hfeatures =
+       struct sbi_hart_features *hfeatures =
                        sbi_scratch_offset_ptr(scratch, hart_features_offset);
 
        return hfeatures->mhpm_count;
@@ -262,7 +252,7 @@ unsigned int sbi_hart_mhpm_count(struct sbi_scratch *scratch)
 
 unsigned int sbi_hart_pmp_count(struct sbi_scratch *scratch)
 {
-       struct hart_features *hfeatures =
+       struct sbi_hart_features *hfeatures =
                        sbi_scratch_offset_ptr(scratch, hart_features_offset);
 
        return hfeatures->pmp_count;
@@ -270,7 +260,7 @@ unsigned int sbi_hart_pmp_count(struct sbi_scratch *scratch)
 
 unsigned long sbi_hart_pmp_granularity(struct sbi_scratch *scratch)
 {
-       struct hart_features *hfeatures =
+       struct sbi_hart_features *hfeatures =
                        sbi_scratch_offset_ptr(scratch, hart_features_offset);
 
        return hfeatures->pmp_gran;
@@ -278,7 +268,7 @@ unsigned long sbi_hart_pmp_granularity(struct sbi_scratch *scratch)
 
 unsigned int sbi_hart_pmp_addrbits(struct sbi_scratch *scratch)
 {
-       struct hart_features *hfeatures =
+       struct sbi_hart_features *hfeatures =
                        sbi_scratch_offset_ptr(scratch, hart_features_offset);
 
        return hfeatures->pmp_addr_bits;
@@ -286,7 +276,7 @@ unsigned int sbi_hart_pmp_addrbits(struct sbi_scratch *scratch)
 
 unsigned int sbi_hart_mhpm_bits(struct sbi_scratch *scratch)
 {
-       struct hart_features *hfeatures =
+       struct sbi_hart_features *hfeatures =
                        sbi_scratch_offset_ptr(scratch, hart_features_offset);
 
        return hfeatures->mhpm_bits;
@@ -336,7 +326,7 @@ int sbi_hart_pmp_configure(struct sbi_scratch *scratch)
 
 int sbi_hart_priv_version(struct sbi_scratch *scratch)
 {
-       struct hart_features *hfeatures =
+       struct sbi_hart_features *hfeatures =
                        sbi_scratch_offset_ptr(scratch, hart_features_offset);
 
        return hfeatures->priv_version;
@@ -346,7 +336,7 @@ void sbi_hart_get_priv_version_str(struct sbi_scratch *scratch,
                                   char *version_str, int nvstr)
 {
        char *temp;
-       struct hart_features *hfeatures =
+       struct sbi_hart_features *hfeatures =
                        sbi_scratch_offset_ptr(scratch, hart_features_offset);
 
        switch (hfeatures->priv_version) {
@@ -368,7 +358,7 @@ void sbi_hart_get_priv_version_str(struct sbi_scratch *scratch,
 }
 
 static inline void __sbi_hart_update_extension(
-                                       struct hart_features *hfeatures,
+                                       struct sbi_hart_features *hfeatures,
                                        enum sbi_hart_extensions ext,
                                        bool enable)
 {
@@ -389,7 +379,7 @@ void sbi_hart_update_extension(struct sbi_scratch *scratch,
                               enum sbi_hart_extensions ext,
                               bool enable)
 {
-       struct hart_features *hfeatures =
+       struct sbi_hart_features *hfeatures =
                        sbi_scratch_offset_ptr(scratch, hart_features_offset);
 
        __sbi_hart_update_extension(hfeatures, ext, enable);
@@ -405,7 +395,7 @@ void sbi_hart_update_extension(struct sbi_scratch *scratch,
 bool sbi_hart_has_extension(struct sbi_scratch *scratch,
                            enum sbi_hart_extensions ext)
 {
-       struct hart_features *hfeatures =
+       struct sbi_hart_features *hfeatures =
                        sbi_scratch_offset_ptr(scratch, hart_features_offset);
 
        if (hfeatures->extensions & BIT(ext))
@@ -453,7 +443,7 @@ static inline char *sbi_hart_extension_id2string(int ext)
 void sbi_hart_get_extensions_str(struct sbi_scratch *scratch,
                                 char *extensions_str, int nestr)
 {
-       struct hart_features *hfeatures =
+       struct sbi_hart_features *hfeatures =
                        sbi_scratch_offset_ptr(scratch, hart_features_offset);
        int offset = 0, ext = 0;
        char *temp;
@@ -539,7 +529,7 @@ static int hart_pmu_get_allowed_bits(void)
 static int hart_detect_features(struct sbi_scratch *scratch)
 {
        struct sbi_trap_info trap = {0};
-       struct hart_features *hfeatures =
+       struct sbi_hart_features *hfeatures =
                sbi_scratch_offset_ptr(scratch, hart_features_offset);
        unsigned long val, oldval;
        int rc;
@@ -718,7 +708,7 @@ int sbi_hart_init(struct sbi_scratch *scratch, bool cold_boot)
                        sbi_hart_expected_trap = &__sbi_expected_trap_hext;
 
                hart_features_offset = sbi_scratch_alloc_offset(
-                                               sizeof(struct hart_features));
+                                       sizeof(struct sbi_hart_features));
                if (!hart_features_offset)
                        return SBI_ENOMEM;
        }
--

2.35.1

--
opensbi mailing list
opensbi at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/opensbi

#5 lore raw

PATCH v5 3/5 lib: sbi_platform: expose hart_features to extension_init callback

In reply to Heiko Stuebner

The platform-specific extension_init callback is supposed to set specific things for the platform opensbi is running on.

So it's also the right place to override specific hart_features if needed - when it's know that autodetection has provided wrong results for example.

---
 include/sbi/sbi_platform.h | 8 +++++---
 lib/sbi/sbi_hart.c         | 3 ++-
 2 files changed, 7 insertions(+), 4 deletions(-)
include/sbi/sbi_platform.h +5 -3
index 87024db..722f27a 100644
@@ -48,6 +48,7 @@
 struct sbi_domain_memregion;
 struct sbi_trap_info;
 struct sbi_trap_regs;
+struct sbi_hart_features;
 
 /** Possible feature flags of a platform */
 enum sbi_platform_features {
@@ -90,7 +91,7 @@ struct sbi_platform_operations {
 	int (*misa_get_xlen)(void);
 
 	/** Initialize (or populate) HART extensions for the platform */
-	int (*extensions_init)(void);
+	int (*extensions_init)(struct sbi_hart_features *hfeatures);
 
 	/** Initialize (or populate) domains for the platform */
 	int (*domains_init)(void);
@@ -464,10 +465,11 @@ static inline int sbi_platform_misa_xlen(const struct sbi_platform *plat)
  * @return 0 on success and negative error code on failure
  */
 static inline int sbi_platform_extensions_init(
-					const struct sbi_platform *plat)
+					const struct sbi_platform *plat,
+					struct sbi_hart_features *hfeatures)
 {
 	if (plat && sbi_platform_ops(plat)->extensions_init)
-		return sbi_platform_ops(plat)->extensions_init();
+		return sbi_platform_ops(plat)->extensions_init(hfeatures);
 	return 0;
 }
 
lib/sbi/sbi_hart.c +2 -1
index d0a6295..dacab1a 100644
@@ -672,7 +672,8 @@ __mhpm_skip:
 	}
 
 	/* Let platform populate extensions */
-	rc = sbi_platform_extensions_init(sbi_platform_thishart_ptr());
+	rc = sbi_platform_extensions_init(sbi_platform_thishart_ptr(),
+					  hfeatures);
 	if (rc)
 		return rc;
 
Signature · 1 line
2.35.1
#6 lore raw

PATCH v5 3/5 lib: sbi_platform: expose hart_features to extension_init callback

Quoted 10 lines · Heiko Stuebner

The platform-specific extension_init callback is supposed to set specific things for the platform opensbi is running on.

So it's also the right place to override specific hart_features if needed - when it's know that autodetection has provided wrong results for example.

Looks good to me.

Regards,
Anup

Quoted 62 lines
---
 include/sbi/sbi_platform.h | 8 +++++---
 lib/sbi/sbi_hart.c         | 3 ++-
 2 files changed, 7 insertions(+), 4 deletions(-)
include/sbi/sbi_platform.h +5 -3
index 87024db..722f27a 100644
@@ -48,6 +48,7 @@
 struct sbi_domain_memregion;
 struct sbi_trap_info;
 struct sbi_trap_regs;
+struct sbi_hart_features;
 
 /** Possible feature flags of a platform */
 enum sbi_platform_features {
@@ -90,7 +91,7 @@ struct sbi_platform_operations {
        int (*misa_get_xlen)(void);
 
        /** Initialize (or populate) HART extensions for the platform */
-       int (*extensions_init)(void);
+       int (*extensions_init)(struct sbi_hart_features *hfeatures);
 
        /** Initialize (or populate) domains for the platform */
        int (*domains_init)(void);
@@ -464,10 +465,11 @@ static inline int sbi_platform_misa_xlen(const struct sbi_platform *plat)
  * @return 0 on success and negative error code on failure
  */
 static inline int sbi_platform_extensions_init(
-                                       const struct sbi_platform *plat)
+                                       const struct sbi_platform *plat,
+                                       struct sbi_hart_features *hfeatures)
 {
        if (plat && sbi_platform_ops(plat)->extensions_init)
-               return sbi_platform_ops(plat)->extensions_init();
+               return sbi_platform_ops(plat)->extensions_init(hfeatures);
        return 0;
 }
 
lib/sbi/sbi_hart.c +2 -2
index d0a6295..dacab1a 100644
@@ -672,7 +672,8 @@ __mhpm_skip:
        }
 
        /* Let platform populate extensions */
-       rc = sbi_platform_extensions_init(sbi_platform_thishart_ptr());
+       rc = sbi_platform_extensions_init(sbi_platform_thishart_ptr(),
+                                         hfeatures);
        if (rc)
                return rc;
 
--

2.35.1

--
opensbi mailing list
opensbi at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/opensbi

#7 lore raw

PATCH v5 4/5 platform: generic: add extensions_init handler and platform-override

In reply to Heiko Stuebner

Init of non-standard extensions is a platform-specific thing, so allow generic platforms to do this via a platform-override.

---
 platform/generic/include/platform_override.h |  3 +++
 platform/generic/platform.c                  | 10 ++++++++++
 2 files changed, 13 insertions(+)
platform/generic/include/platform_override.h +3 -0
index e55da25..7f1558d 100644
@@ -10,6 +10,7 @@
 #ifndef __PLATFORM_OVERRIDE_H__
 #define __PLATFORM_OVERRIDE_H__
 
+#include <sbi/sbi_hart.h>
 #include <sbi/sbi_types.h>
 #include <sbi/sbi_trap.h>
 
@@ -22,6 +23,8 @@ struct platform_override {
 	void (*early_exit)(const struct fdt_match *match);
 	void (*final_exit)(const struct fdt_match *match);
 	int (*fdt_fixup)(void *fdt, const struct fdt_match *match);
+	int (*extensions_init)(const struct fdt_match *match,
+			       struct sbi_hart_features *hfeatures);
 	int (*vendor_ext_check)(long extid, const struct fdt_match *match);
 	int (*vendor_ext_provider)(long extid, long funcid,
 				   const struct sbi_trap_regs *regs,
platform/generic/platform.c +10 -0
index bf51aba..595b0fd 100644
@@ -204,6 +204,15 @@ static void generic_final_exit(void)
 		generic_plat->final_exit(generic_plat_match);
 }
 
+static int generic_extensions_init(struct sbi_hart_features *hfeatures)
+{
+	if (generic_plat && generic_plat->extensions_init)
+		return generic_plat->extensions_init(generic_plat_match,
+						     hfeatures);
+
+	return 0;
+}
+
 static int generic_domains_init(void)
 {
 	return fdt_domains_populate(fdt_get_address());
@@ -257,6 +266,7 @@ const struct sbi_platform_operations platform_ops = {
 	.final_init		= generic_final_init,
 	.early_exit		= generic_early_exit,
 	.final_exit		= generic_final_exit,
+	.extensions_init	= generic_extensions_init,
 	.domains_init		= generic_domains_init,
 	.console_init		= generic_console_init,
 	.irqchip_init		= fdt_irqchip_init,
Signature · 1 line
2.35.1
#8 lore raw

PATCH v5 4/5 platform: generic: add extensions_init handler and platform-override

Quoted 5 lines · Heiko Stuebner

Init of non-standard extensions is a platform-specific thing, so allow generic platforms to do this via a platform-override.

Looks good to me.

Regards,
Anup

Quoted 62 lines
---
 platform/generic/include/platform_override.h |  3 +++
 platform/generic/platform.c                  | 10 ++++++++++
 2 files changed, 13 insertions(+)
platform/generic/include/platform_override.h +3 -0
index e55da25..7f1558d 100644
@@ -10,6 +10,7 @@
 #ifndef __PLATFORM_OVERRIDE_H__
 #define __PLATFORM_OVERRIDE_H__
 
+#include <sbi/sbi_hart.h>
 #include <sbi/sbi_types.h>
 #include <sbi/sbi_trap.h>
 
@@ -22,6 +23,8 @@ struct platform_override {
        void (*early_exit)(const struct fdt_match *match);
        void (*final_exit)(const struct fdt_match *match);
        int (*fdt_fixup)(void *fdt, const struct fdt_match *match);
+       int (*extensions_init)(const struct fdt_match *match,
+                              struct sbi_hart_features *hfeatures);
        int (*vendor_ext_check)(long extid, const struct fdt_match *match);
        int (*vendor_ext_provider)(long extid, long funcid,
                                   const struct sbi_trap_regs *regs,
platform/generic/platform.c +10 -1
index bf51aba..595b0fd 100644
@@ -204,6 +204,15 @@ static void generic_final_exit(void)
                generic_plat->final_exit(generic_plat_match);
 }
 
+static int generic_extensions_init(struct sbi_hart_features *hfeatures)
+{
+       if (generic_plat && generic_plat->extensions_init)
+               return generic_plat->extensions_init(generic_plat_match,
+                                                    hfeatures);
+
+       return 0;
+}
+
 static int generic_domains_init(void)
 {
        return fdt_domains_populate(fdt_get_address());
@@ -257,6 +266,7 @@ const struct sbi_platform_operations platform_ops = {
        .final_init             = generic_final_init,
        .early_exit             = generic_early_exit,
        .final_exit             = generic_final_exit,
+       .extensions_init        = generic_extensions_init,
        .domains_init           = generic_domains_init,
        .console_init           = generic_console_init,
        .irqchip_init           = fdt_irqchip_init,
--

2.35.1

--
opensbi mailing list
opensbi at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/opensbi

#9 lore raw

PATCH v5 5/5 platform: generic: allwinner: add support for c9xx pmu

In reply to Heiko Stuebner

With the T-HEAD C9XX cores being designed before or during ratification of the SSCOFPMF extension, they implement a PMU extension that behaves very similar but not equal to it by providing overflow interrupts though in a slightly different registers format.

The sun20i-d1 is using this core. So implement the necessary overrides to allow its pmu to be used via the standard sbi-pmu extension.

For now it's also the only soc using this core, so keep the additional code in the d1-space for now.

---
 platform/generic/allwinner/sun20i-d1.c |  60 ++++++++++++
 platform/generic/include/thead_c9xx.h  | 127 +++++++++++++++++++++++++
 2 files changed, 187 insertions(+)
 create mode 100644 platform/generic/include/thead_c9xx.h
platform/generic/allwinner/sun20i-d1.c +60 -0
index 5b2656c..6a502e5 100644
@@ -5,11 +5,13 @@
  */
 
 #include <platform_override.h>
+#include <thead_c9xx.h>
 #include <sbi/riscv_io.h>
 #include <sbi/sbi_bitops.h>
 #include <sbi/sbi_ecall_interface.h>
 #include <sbi/sbi_error.h>
 #include <sbi/sbi_hsm.h>
+#include <sbi/sbi_pmu.h>
 #include <sbi_utils/fdt/fdt_helper.h>
 #include <sbi_utils/irqchip/fdt_irqchip_plic.h>
 
@@ -199,6 +201,63 @@ static int sun20i_d1_final_init(bool cold_boot, const struct fdt_match *match)
 	return 0;
 }
 
+#include <sbi/sbi_console.h>
+
+static void thead_c9xx_pmu_ctr_enable_irq(uint32_t ctr_idx)
+{
+	unsigned long mip_val;
+
+	if (ctr_idx >= SBI_PMU_HW_CTR_MAX)
+		return;
+
+	mip_val = csr_read(CSR_MIP);
+	/**
+	 * Clear out the OF bit so that next interrupt can be enabled.
+	 * This should be done only when the corresponding overflow interrupt
+	 * bit is cleared. That indicates that software has already handled the
+	 * previous interrupts or the hardware yet to set an overflow interrupt.
+	 * Otherwise, there will be race conditions where we may clear the bit
+	 * the software is yet to handle the interrupt.
+	 */
+	if (!(mip_val & THEAD_C9XX_MIP_MOIP))
+		csr_clear(THEAD_C9XX_CSR_MCOUNTEROF, BIT(ctr_idx));
+
+	/**
+	 * SSCOFPMF uses the OF bit for enabling/disabling the interrupt,
+	 * while the C9XX has designated enable bits.
+	 * So enable per-counter interrupt on C9xx here.
+	 */
+	csr_set(THEAD_C9XX_CSR_MCOUNTERINTEN, BIT(ctr_idx));
+}
+
+static void thead_c9xx_pmu_ctr_disable_irq(uint32_t ctr_idx)
+{
+	csr_clear(THEAD_C9XX_CSR_MCOUNTERINTEN, BIT(ctr_idx));
+}
+
+static int thead_c9xx_pmu_irq_bit(void)
+{
+	return THEAD_C9XX_MIP_MOIP;
+}
+
+const struct sbi_pmu_device thead_c9xx_pmu_device = {
+	.hw_counter_enable_irq = thead_c9xx_pmu_ctr_enable_irq,
+	.hw_counter_disable_irq = thead_c9xx_pmu_ctr_disable_irq,
+	.hw_counter_irq_bit = thead_c9xx_pmu_irq_bit,
+};
+
+static int sun20i_d1_extensions_init(const struct fdt_match *match,
+				     struct sbi_hart_features *hfeatures)
+{
+	sbi_pmu_set_device(&thead_c9xx_pmu_device);
+
+	/* auto-detection doesn't work on t-head c9xx cores */
+	hfeatures->mhpm_count = 29;
+	hfeatures->mhpm_bits = 64;
+
+	return 0;
+}
+
 static const struct fdt_match sun20i_d1_match[] = {
 	{ .compatible = "allwinner,sun20i-d1" },
 	{ },
@@ -207,4 +266,5 @@ static const struct fdt_match sun20i_d1_match[] = {
 const struct platform_override sun20i_d1 = {
 	.match_table	= sun20i_d1_match,
 	.final_init	= sun20i_d1_final_init,
+	.extensions_init = sun20i_d1_extensions_init,
 };
platform/generic/include/thead_c9xx.h new file +127 -0

127 lines not on this page · raw message

Signature · 1 line
2.35.1
#10 lore raw

PATCH v5 5/5 platform: generic: allwinner: add support for c9xx pmu

Quoted 6 lines · Heiko Stuebner

With the T-HEAD C9XX cores being designed before or during ratification of the SSCOFPMF extension, they implement a PMU extension that behaves very similar but not equal to it by providing overflow interrupts though in a slightly different registers format.

Quoted 8 lines

The sun20i-d1 is using this core. So implement the necessary overrides to allow its pmu to be used via the standard sbi-pmu extension.

For now it's also the only soc using this core, so keep the additional code in the d1-space for now.

Looks good to me.

Regards,
Anup

Quoted 235 lines
---
 platform/generic/allwinner/sun20i-d1.c |  60 ++++++++++++
 platform/generic/include/thead_c9xx.h  | 127 +++++++++++++++++++++++++
 2 files changed, 187 insertions(+)
 create mode 100644 platform/generic/include/thead_c9xx.h
platform/generic/allwinner/sun20i-d1.c +60 -0
index 5b2656c..6a502e5 100644
@@ -5,11 +5,13 @@
  */
 
 #include <platform_override.h>
+#include <thead_c9xx.h>
 #include <sbi/riscv_io.h>
 #include <sbi/sbi_bitops.h>
 #include <sbi/sbi_ecall_interface.h>
 #include <sbi/sbi_error.h>
 #include <sbi/sbi_hsm.h>
+#include <sbi/sbi_pmu.h>
 #include <sbi_utils/fdt/fdt_helper.h>
 #include <sbi_utils/irqchip/fdt_irqchip_plic.h>
 
@@ -199,6 +201,63 @@ static int sun20i_d1_final_init(bool cold_boot, const struct fdt_match *match)
        return 0;
 }
 
+#include <sbi/sbi_console.h>
+
+static void thead_c9xx_pmu_ctr_enable_irq(uint32_t ctr_idx)
+{
+       unsigned long mip_val;
+
+       if (ctr_idx >= SBI_PMU_HW_CTR_MAX)
+               return;
+
+       mip_val = csr_read(CSR_MIP);
+       /**
+        * Clear out the OF bit so that next interrupt can be enabled.
+        * This should be done only when the corresponding overflow interrupt
+        * bit is cleared. That indicates that software has already handled the
+        * previous interrupts or the hardware yet to set an overflow interrupt.
+        * Otherwise, there will be race conditions where we may clear the bit
+        * the software is yet to handle the interrupt.
+        */
+       if (!(mip_val & THEAD_C9XX_MIP_MOIP))
+               csr_clear(THEAD_C9XX_CSR_MCOUNTEROF, BIT(ctr_idx));
+
+       /**
+        * SSCOFPMF uses the OF bit for enabling/disabling the interrupt,
+        * while the C9XX has designated enable bits.
+        * So enable per-counter interrupt on C9xx here.
+        */
+       csr_set(THEAD_C9XX_CSR_MCOUNTERINTEN, BIT(ctr_idx));
+}
+
+static void thead_c9xx_pmu_ctr_disable_irq(uint32_t ctr_idx)
+{
+       csr_clear(THEAD_C9XX_CSR_MCOUNTERINTEN, BIT(ctr_idx));
+}
+
+static int thead_c9xx_pmu_irq_bit(void)
+{
+       return THEAD_C9XX_MIP_MOIP;
+}
+
+const struct sbi_pmu_device thead_c9xx_pmu_device = {
+       .hw_counter_enable_irq = thead_c9xx_pmu_ctr_enable_irq,
+       .hw_counter_disable_irq = thead_c9xx_pmu_ctr_disable_irq,
+       .hw_counter_irq_bit = thead_c9xx_pmu_irq_bit,
+};
+
+static int sun20i_d1_extensions_init(const struct fdt_match *match,
+                                    struct sbi_hart_features *hfeatures)
+{
+       sbi_pmu_set_device(&thead_c9xx_pmu_device);
+
+       /* auto-detection doesn't work on t-head c9xx cores */
+       hfeatures->mhpm_count = 29;
+       hfeatures->mhpm_bits = 64;
+
+       return 0;
+}
+
 static const struct fdt_match sun20i_d1_match[] = {
        { .compatible = "allwinner,sun20i-d1" },
        { },
@@ -207,4 +266,5 @@ static const struct fdt_match sun20i_d1_match[] = {
 const struct platform_override sun20i_d1 = {
        .match_table    = sun20i_d1_match,
        .final_init     = sun20i_d1_final_init,
+       .extensions_init = sun20i_d1_extensions_init,
 };
platform/generic/include/thead_c9xx.h new file +127 -1
new file mode 100644
index 0000000..bab0408
@@ -0,0 +1,127 @@
+#ifndef __RISCV_THEAD_C9XX_H____
+#define __RISCV_THEAD_C9XX_H____
+
+/* T-HEAD C9xx M mode CSR.  */
+#define THEAD_C9XX_CSR_MXSTATUS                0x7c0
+#define THEAD_C9XX_CSR_MHCR            0x7c1
+#define THEAD_C9XX_CSR_MCOR            0x7c2
+#define THEAD_C9XX_CSR_MCCR2           0x7c3
+#define THEAD_C9XX_CSR_MCER2           0x7c4
+#define THEAD_C9XX_CSR_MHINT           0x7c5
+#define THEAD_C9XX_CSR_MRMR            0x7c6
+#define THEAD_C9XX_CSR_MRVBR           0x7c7
+#define THEAD_C9XX_CSR_MCER            0x7c8
+#define THEAD_C9XX_CSR_MCOUNTERWEN     0x7c9
+#define THEAD_C9XX_CSR_MCOUNTERINTEN   0x7ca
+#define THEAD_C9XX_CSR_MCOUNTEROF      0x7cb
+#define THEAD_C9XX_CSR_MHINT2          0x7cc
+#define THEAD_C9XX_CSR_MHINT3          0x7cd
+#define THEAD_C9XX_CSR_MRADDR          0x7e0
+#define THEAD_C9XX_CSR_MEXSTATUS       0x7e1
+#define THEAD_C9XX_CSR_MNMICAUSE       0x7e2
+#define THEAD_C9XX_CSR_MNMIPC          0x7e3
+#define THEAD_C9XX_CSR_MHPMCR          0x7f0
+#define THEAD_C9XX_CSR_MHPMSR          0x7f1
+#define THEAD_C9XX_CSR_MHPMER          0x7f2
+#define THEAD_C9XX_CSR_MSMPR           0x7f3
+#define THEAD_C9XX_CSR_MTEECFG         0x7f4
+#define THEAD_C9XX_CSR_MZONEID         0x7f5
+#define THEAD_C9XX_CSR_ML2CPID         0x7f6
+#define THEAD_C9XX_CSR_ML2WP           0x7f7
+#define THEAD_C9XX_CSR_MDTCMCR         0x7f8
+#define THEAD_C9XX_CSR_USP             0x7d1
+#define THEAD_C9XX_CSR_MCINS           0x7d2
+#define THEAD_C9XX_CSR_MCINDEX         0x7d3
+#define THEAD_C9XX_CSR_MCDATA0         0x7d4
+#define THEAD_C9XX_CSR_MCDATA1         0x7d5
+#define THEAD_C9XX_CSR_MEICR           0x7d6
+#define THEAD_C9XX_CSR_MEICR2          0x7d7
+#define THEAD_C9XX_CSR_MBEADDR         0x7d8
+#define THEAD_C9XX_CSR_MCPUID          0xfc0
+#define THEAD_C9XX_CSR_MAPBADDR                0xfc1
+#define THEAD_C9XX_CSR_MWMSR           0xfc2
+#define THEAD_C9XX_CSR_MHALTCAUSE      0xfe0
+#define THEAD_C9XX_CSR_MDBGINFO                0xfe1
+#define THEAD_C9XX_CSR_MPCFIFO         0xfe2
+
+/* T-HEAD C9xx S mode CSR.  */
+#define THEAD_C9XX_CSR_SXSTATUS                0x5c0
+#define THEAD_C9XX_CSR_SHCR            0x5c1
+#define THEAD_C9XX_CSR_SCER2           0x5c2
+#define THEAD_C9XX_CSR_SCER            0x5c3
+#define THEAD_C9XX_CSR_SCOUNTERINTEN   0x5c4
+#define THEAD_C9XX_CSR_SCOUNTEROF      0x5c5
+#define THEAD_C9XX_CSR_SHINT           0x5c6
+#define THEAD_C9XX_CSR_SHINT2          0x5c7
+#define THEAD_C9XX_CSR_SHPMINHIBIT     0x5c8
+#define THEAD_C9XX_CSR_SHPMCR          0x5c9
+#define THEAD_C9XX_CSR_SHPMSR          0x5ca
+#define THEAD_C9XX_CSR_SHPMER          0x5cb
+#define THEAD_C9XX_CSR_SL2CPID         0x5cc
+#define THEAD_C9XX_CSR_SL2WP           0x5cd
+#define THEAD_C9XX_CSR_SBEADDR         0x5d0
+#define THEAD_C9XX_CSR_SCYCLE          0x5e0
+#define THEAD_C9XX_CSR_SHPMCOUNTER1    0x5e1
+#define THEAD_C9XX_CSR_SHPMCOUNTER2    0x5e2
+#define THEAD_C9XX_CSR_SHPMCOUNTER3    0x5e3
+#define THEAD_C9XX_CSR_SHPMCOUNTER4    0x5e4
+#define THEAD_C9XX_CSR_SHPMCOUNTER5    0x5e5
+#define THEAD_C9XX_CSR_SHPMCOUNTER6    0x5e6
+#define THEAD_C9XX_CSR_SHPMCOUNTER7    0x5e7
+#define THEAD_C9XX_CSR_SHPMCOUNTER8    0x5e8
+#define THEAD_C9XX_CSR_SHPMCOUNTER9    0x5e9
+#define THEAD_C9XX_CSR_SHPMCOUNTER10   0x5ea
+#define THEAD_C9XX_CSR_SHPMCOUNTER11   0x5eb
+#define THEAD_C9XX_CSR_SHPMCOUNTER12   0x5ec
+#define THEAD_C9XX_CSR_SHPMCOUNTER13   0x5ed
+#define THEAD_C9XX_CSR_SHPMCOUNTER14   0x5ee
+#define THEAD_C9XX_CSR_SHPMCOUNTER15   0x5ef
+#define THEAD_C9XX_CSR_SHPMCOUNTER16   0x5f0
+#define THEAD_C9XX_CSR_SHPMCOUNTER17   0x5f1
+#define THEAD_C9XX_CSR_SHPMCOUNTER18   0x5f2
+#define THEAD_C9XX_CSR_SHPMCOUNTER19   0x5f3
+#define THEAD_C9XX_CSR_SHPMCOUNTER20   0x5f4
+#define THEAD_C9XX_CSR_SHPMCOUNTER21   0x5f5
+#define THEAD_C9XX_CSR_SHPMCOUNTER22   0x5f6
+#define THEAD_C9XX_CSR_SHPMCOUNTER23   0x5f7
+#define THEAD_C9XX_CSR_SHPMCOUNTER24   0x5f8
+#define THEAD_C9XX_CSR_SHPMCOUNTER25   0x5f9
+#define THEAD_C9XX_CSR_SHPMCOUNTER26   0x5fa
+#define THEAD_C9XX_CSR_SHPMCOUNTER27   0x5fb
+#define THEAD_C9XX_CSR_SHPMCOUNTER28   0x5fc
+#define THEAD_C9XX_CSR_SHPMCOUNTER29   0x5fd
+#define THEAD_C9XX_CSR_SHPMCOUNTER30   0x5fe
+#define THEAD_C9XX_CSR_SHPMCOUNTER31   0x5ff
+
+/* T-HEAD C9xx U mode CSR.  */
+#define THEAD_C9XX_CSR_FXCR            0x800
+
+/* T-HEAD C9xx MMU extentions.  */
+#define THEAD_C9XX_CSR_SMIR            0x9c0
+#define THEAD_C9XX_CSR_SMEL            0x9c1
+#define THEAD_C9XX_CSR_SMEH            0x9c2
+#define THEAD_C9XX_CSR_SMCIR           0x9c3
+
+/* T-HEAD C9xx Security CSR(May be droped).  */
+#define THEAD_C9XX_CSR_MEBR            0xbe0
+#define THEAD_C9XX_CSR_NT_MSTATUS      0xbe1
+#define THEAD_C9XX_CSR_NT_MIE          0xbe2
+#define THEAD_C9XX_CSR_NT_MTVEC                0xbe3
+#define THEAD_C9XX_CSR_NT_MTVT         0xbe4
+#define THEAD_C9XX_CSR_NT_MEPC         0xbe5
+#define THEAD_C9XX_CSR_NT_MCAUSE       0xbe6
+#define THEAD_C9XX_CSR_NT_MIP          0xbe7
+#define THEAD_C9XX_CSR_NT_MINTSTATE    0xbe8
+#define THEAD_C9XX_CSR_NT_MXSTATUS     0xbe9
+#define THEAD_C9XX_CSR_NT_MEBR         0xbea
+#define THEAD_C9XX_CSR_NT_MSP          0xbeb
+#define THEAD_C9XX_CSR_T_USP           0xbec
+#define THEAD_C9XX_CSR_T_MDCR          0xbed
+#define THEAD_C9XX_CSR_T_MPCR          0xbee
+#define THEAD_C9XX_CSR_PMPTEECFG       0xbef
+
+/* T-HEAD C9xx MIP CSR extension */
+#define THEAD_C9XX_IRQ_PMU_OVF         17
+#define THEAD_C9XX_MIP_MOIP            (_UL(1) << THEAD_C9XX_IRQ_PMU_OVF)
+
+#endif
--

2.35.1

--
opensbi mailing list
opensbi at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/opensbi

#11 lore raw

v5 cover Add support for T-HEAD C9xx PMU extensions

In reply to Heiko Stuebner
Quoted 52 lines · Heiko Stuebner

The T-HEAD C9XX cores implement functionality very similar to SSCOFPMF. Instead of implementing a separate interface into SBI as done in v1, we can add the C9XX tidbits with quite minimal overhead and leaverage the existing SBI pmu interface including giving access to the firmware counters.

The current only hickup is the detection override in sbi_hart, where I still need to find out why the MHPMCOUNTERs are not writeable at _that_ point of the boot, but with this series on top of openSBI 1.1 and the matching kernel perf patch I get reasonable results for example for:

perf stat -e cycles -e instructions -e L1-icache-load-misses -e L1-icache-loads ls

Performance counter stats for 'ls':

          17119496      cycles
           2867765      instructions              #    0.17  insn per cycle
             55929      L1-icache-load-misses     #    1.61% of all L1-icache accesses
           3467346      L1-icache-loads
       0.030156216 seconds time elapsed

       0.000000000 seconds user
       0.023496000 seconds sys

changes in v5:
- use csr_set, csr_clear in allwinner pmu functions
- expose hart_features struct into header
- make hart_features param for extension_init callback to allow platforms to override specific settings

changes in v4:
- use the new sbi_pmu_device structure for holding the overrides and extend it where needed

changes in v3:
- follow Atish's advice and implement an abstraction to not pollute the core pmu with cpu-specific variants

changes in v2:
- don't implement a separate interface but instead modify the sbi-pmu to allow the c9xx to use standard pmu interface

Heiko Stuebner (5):
lib: sbi_pmu: move pmu irq information into pmu itself
lib: sbi_hart: move hart_features struct to a public location
lib: sbi_platform: expose hart_features to extension_init callback
platform: generic: add extensions_init handler and platform-override
platform: generic: allwinner: add support for c9xx pmu

Quoted 20 lines
 include/sbi/sbi_hart.h                       |  11 ++
 include/sbi/sbi_platform.h                   |   8 +-
 include/sbi/sbi_pmu.h                        |   8 ++
 lib/sbi/sbi_hart.c                           |  43 +++----
 lib/sbi/sbi_pmu.c                            |  12 ++
 platform/generic/allwinner/sun20i-d1.c       |  60 +++++++++
 platform/generic/include/platform_override.h |   3 +
 platform/generic/include/thead_c9xx.h        | 127 +++++++++++++++++++
 platform/generic/platform.c                  |  10 ++
 9 files changed, 253 insertions(+), 29 deletions(-)
 create mode 100644 platform/generic/include/thead_c9xx.h
Signature · 7 lines
2.35.1


-- 
opensbi mailing list
opensbi at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/opensbi

For the series

#12 lore raw

v5 cover Add support for T-HEAD C9xx PMU extensions

For the series

Quoted 78 lines · Andrew Jones
Quoted 64 lines · Heiko Stuebner

The T-HEAD C9XX cores implement functionality very similar to SSCOFPMF. Instead of implementing a separate interface into SBI as done in v1, we can add the C9XX tidbits with quite minimal overhead and leaverage the existing SBI pmu interface including giving access to the firmware counters.

The current only hickup is the detection override in sbi_hart, where I still need to find out why the MHPMCOUNTERs are not writeable at _that_ point of the boot, but with this series on top of openSBI 1.1 and the matching kernel perf patch I get reasonable results for example for:

perf stat -e cycles -e instructions -e L1-icache-load-misses -e L1-icache-loads ls

Performance counter stats for 'ls':

          17119496      cycles
           2867765      instructions              #    0.17  insn per cycle
             55929      L1-icache-load-misses     #    1.61% of all L1-icache accesses
           3467346      L1-icache-loads
       0.030156216 seconds time elapsed

       0.000000000 seconds user
       0.023496000 seconds sys

changes in v5:
- use csr_set, csr_clear in allwinner pmu functions
- expose hart_features struct into header
- make hart_features param for extension_init callback to allow platforms to override specific settings

changes in v4:
- use the new sbi_pmu_device structure for holding the overrides and extend it where needed

changes in v3:
- follow Atish's advice and implement an abstraction to not pollute the core pmu with cpu-specific variants

changes in v2:
- don't implement a separate interface but instead modify the sbi-pmu to allow the c9xx to use standard pmu interface

Heiko Stuebner (5):
lib: sbi_pmu: move pmu irq information into pmu itself
lib: sbi_hart: move hart_features struct to a public location
lib: sbi_platform: expose hart_features to extension_init callback
platform: generic: add extensions_init handler and platform-override
platform: generic: allwinner: add support for c9xx pmu

 include/sbi/sbi_hart.h                       |  11 ++
 include/sbi/sbi_platform.h                   |   8 +-
 include/sbi/sbi_pmu.h                        |   8 ++
 lib/sbi/sbi_hart.c                           |  43 +++----
 lib/sbi/sbi_pmu.c                            |  12 ++
 platform/generic/allwinner/sun20i-d1.c       |  60 +++++++++
 platform/generic/include/platform_override.h |   3 +
 platform/generic/include/thead_c9xx.h        | 127 +++++++++++++++++++
 platform/generic/platform.c                  |  10 ++
 9 files changed, 253 insertions(+), 29 deletions(-)
 create mode 100644 platform/generic/include/thead_c9xx.h
Quoted 8 lines

--
2.35.1

--
opensbi mailing list
opensbi at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/opensbi

For the series

Signature · 2 lines
Best Regards
 Guo Ren
Applied
#13 lore raw

v5 cover Add support for T-HEAD C9xx PMU extensions

In reply to Heiko Stuebner
Quoted 46 lines · Heiko Stuebner

The T-HEAD C9XX cores implement functionality very similar to SSCOFPMF. Instead of implementing a separate interface into SBI as done in v1, we can add the C9XX tidbits with quite minimal overhead and leaverage the existing SBI pmu interface including giving access to the firmware counters.

The current only hickup is the detection override in sbi_hart, where I still need to find out why the MHPMCOUNTERs are not writeable at _that_ point of the boot, but with this series on top of openSBI 1.1 and the matching kernel perf patch I get reasonable results for example for:

perf stat -e cycles -e instructions -e L1-icache-load-misses -e L1-icache-loads ls

Performance counter stats for 'ls':

          17119496      cycles
           2867765      instructions              #    0.17  insn per cycle
             55929      L1-icache-load-misses     #    1.61% of all L1-icache accesses
           3467346      L1-icache-loads
       0.030156216 seconds time elapsed

       0.000000000 seconds user
       0.023496000 seconds sys

changes in v5:
- use csr_set, csr_clear in allwinner pmu functions
- expose hart_features struct into header
- make hart_features param for extension_init callback to allow platforms to override specific settings

changes in v4:
- use the new sbi_pmu_device structure for holding the overrides and extend it where needed

changes in v3:
- follow Atish's advice and implement an abstraction to not pollute the core pmu with cpu-specific variants

changes in v2:
- don't implement a separate interface but instead modify the sbi-pmu to allow the c9xx to use standard pmu interface

Quoted 6 lines

Heiko Stuebner (5):
lib: sbi_pmu: move pmu irq information into pmu itself
lib: sbi_hart: move hart_features struct to a public location
lib: sbi_platform: expose hart_features to extension_init callback
platform: generic: add extensions_init handler and platform-override
platform: generic: allwinner: add support for c9xx pmu

Applied this series to the riscv/opensbi repo.

Thanks,
Anup

Quoted 21 lines
 include/sbi/sbi_hart.h                       |  11 ++
 include/sbi/sbi_platform.h                   |   8 +-
 include/sbi/sbi_pmu.h                        |   8 ++
 lib/sbi/sbi_hart.c                           |  43 +++----
 lib/sbi/sbi_pmu.c                            |  12 ++
 platform/generic/allwinner/sun20i-d1.c       |  60 +++++++++
 platform/generic/include/platform_override.h |   3 +
 platform/generic/include/thead_c9xx.h        | 127 +++++++++++++++++++
 platform/generic/platform.c                  |  10 ++
 9 files changed, 253 insertions(+), 29 deletions(-)
 create mode 100644 platform/generic/include/thead_c9xx.h

--
2.35.1

--
opensbi mailing list
opensbi at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/opensbi

#14 lore raw

v5 cover Add support for T-HEAD C9xx PMU extensions

Am Donnerstag, 13. Oktober 2022, 06:26:43 CEST schrieb Anup Patel:

Quoted 47 lines · Heiko Stuebner
Quoted 46 lines

The T-HEAD C9XX cores implement functionality very similar to SSCOFPMF. Instead of implementing a separate interface into SBI as done in v1, we can add the C9XX tidbits with quite minimal overhead and leaverage the existing SBI pmu interface including giving access to the firmware counters.

The current only hickup is the detection override in sbi_hart, where I still need to find out why the MHPMCOUNTERs are not writeable at _that_ point of the boot, but with this series on top of openSBI 1.1 and the matching kernel perf patch I get reasonable results for example for:

perf stat -e cycles -e instructions -e L1-icache-load-misses -e L1-icache-loads ls

Performance counter stats for 'ls':

          17119496      cycles
           2867765      instructions              #    0.17  insn per cycle
             55929      L1-icache-load-misses     #    1.61% of all L1-icache accesses
           3467346      L1-icache-loads
       0.030156216 seconds time elapsed

       0.000000000 seconds user
       0.023496000 seconds sys

changes in v5:
- use csr_set, csr_clear in allwinner pmu functions
- expose hart_features struct into header
- make hart_features param for extension_init callback to allow platforms to override specific settings

changes in v4:
- use the new sbi_pmu_device structure for holding the overrides and extend it where needed

changes in v3:
- follow Atish's advice and implement an abstraction to not pollute the core pmu with cpu-specific variants

changes in v2:
- don't implement a separate interface but instead modify the sbi-pmu to allow the c9xx to use standard pmu interface

Quoted 8 lines
Quoted 6 lines

Heiko Stuebner (5):
lib: sbi_pmu: move pmu irq information into pmu itself
lib: sbi_hart: move hart_features struct to a public location
lib: sbi_platform: expose hart_features to extension_init callback
platform: generic: add extensions_init handler and platform-override
platform: generic: allwinner: add support for c9xx pmu

Applied this series to the riscv/opensbi repo.

Very cool, thanks a lot for picking this up :-)

Thanks
Heiko

Quoted 21 lines
Quoted 20 lines
 include/sbi/sbi_hart.h                       |  11 ++
 include/sbi/sbi_platform.h                   |   8 +-
 include/sbi/sbi_pmu.h                        |   8 ++
 lib/sbi/sbi_hart.c                           |  43 +++----
 lib/sbi/sbi_pmu.c                            |  12 ++
 platform/generic/allwinner/sun20i-d1.c       |  60 +++++++++
 platform/generic/include/platform_override.h |   3 +
 platform/generic/include/thead_c9xx.h        | 127 +++++++++++++++++++
 platform/generic/platform.c                  |  10 ++
 9 files changed, 253 insertions(+), 29 deletions(-)
 create mode 100644 platform/generic/include/thead_c9xx.h

--
2.35.1

--
opensbi mailing list
opensbi at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/opensbi

#15 lore raw

v5 cover Add support for T-HEAD C9xx PMU extensions

Great! Thx Anup, and Heiko.

Quoted 89 lines · Heiko Stuebner

Am Donnerstag, 13. Oktober 2022, 06:26:43 CEST schrieb Anup Patel:

Quoted 47 lines · Heiko Stuebner
Quoted 46 lines

The T-HEAD C9XX cores implement functionality very similar to SSCOFPMF. Instead of implementing a separate interface into SBI as done in v1, we can add the C9XX tidbits with quite minimal overhead and leaverage the existing SBI pmu interface including giving access to the firmware counters.

The current only hickup is the detection override in sbi_hart, where I still need to find out why the MHPMCOUNTERs are not writeable at _that_ point of the boot, but with this series on top of openSBI 1.1 and the matching kernel perf patch I get reasonable results for example for:

perf stat -e cycles -e instructions -e L1-icache-load-misses -e L1-icache-loads ls

Performance counter stats for 'ls':

          17119496      cycles
           2867765      instructions              #    0.17  insn per cycle
             55929      L1-icache-load-misses     #    1.61% of all L1-icache accesses
           3467346      L1-icache-loads
       0.030156216 seconds time elapsed

       0.000000000 seconds user
       0.023496000 seconds sys

changes in v5:
- use csr_set, csr_clear in allwinner pmu functions
- expose hart_features struct into header
- make hart_features param for extension_init callback to allow platforms to override specific settings

changes in v4:
- use the new sbi_pmu_device structure for holding the overrides and extend it where needed

changes in v3:
- follow Atish's advice and implement an abstraction to not pollute the core pmu with cpu-specific variants

changes in v2:
- don't implement a separate interface but instead modify the sbi-pmu to allow the c9xx to use standard pmu interface

Quoted 8 lines
Quoted 6 lines

Heiko Stuebner (5):
lib: sbi_pmu: move pmu irq information into pmu itself
lib: sbi_hart: move hart_features struct to a public location
lib: sbi_platform: expose hart_features to extension_init callback
platform: generic: add extensions_init handler and platform-override
platform: generic: allwinner: add support for c9xx pmu

Applied this series to the riscv/opensbi repo.

Very cool, thanks a lot for picking this up :-)

Thanks
Heiko

Quoted 21 lines
Quoted 20 lines
 include/sbi/sbi_hart.h                       |  11 ++
 include/sbi/sbi_platform.h                   |   8 +-
 include/sbi/sbi_pmu.h                        |   8 ++
 lib/sbi/sbi_hart.c                           |  43 +++----
 lib/sbi/sbi_pmu.c                            |  12 ++
 platform/generic/allwinner/sun20i-d1.c       |  60 +++++++++
 platform/generic/include/platform_override.h |   3 +
 platform/generic/include/thead_c9xx.h        | 127 +++++++++++++++++++
 platform/generic/platform.c                  |  10 ++
 9 files changed, 253 insertions(+), 29 deletions(-)
 create mode 100644 platform/generic/include/thead_c9xx.h

--
2.35.1

--
opensbi mailing list
opensbi at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/opensbi

Signature · 2 lines
Best Regards
 Guo Ren