doc: board: j721e_evm: Add DM firmware steps
PATCH 1/1 doc: board: j721e_evm: Add DM firmware steps
J721e needs DM firmware when using updated SYSFW. Add steps to fetch, build, and deploy the same.
--- doc/board/ti/j721e_evm.rst | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-)
doc/board/ti/j721e_evm.rst +10 -6
@@ -142,7 +142,11 @@ Sources: Tree: https://github.com/OP-TEE/optee_os.git Branch: master -4. U-Boot: +4. DM: + Tree: git://git.ti.com/processor-firmware/ti-linux-firmware.git + Branch: ti-linux-firmware + +5. U-Boot: Tree: https://source.denx.de/u-boot/u-boot Branch: master
@@ -152,7 +156,7 @@ Build procedure: .. code-block:: text - $ make CROSS_COMPILE=arm-linux-gnueabihf- + $ make CROSS_COMPILE=arm-linux-gnueabihf- SOC=j721e 2. ATF:
@@ -172,15 +176,15 @@ Build procedure: .. code-block:: text - $ make CROSS_COMPILE=arm-linux-gnueabihf- j721e_evm_r5_defconfig O=/tmp/r5 - $ make CROSS_COMPILE=arm-linux-gnueabihf- O=/tmp/r5 + $ make CROSS_COMPILE=arm-linux-gnueabihf- j721e_evm_r5_defconfig O=build/r5 + $ make CROSS_COMPILE=arm-linux-gnueabihf- O=build/r5 * 4.2 A72: .. code-block:: text - $ make CROSS_COMPILE=aarch64-linux-gnu- j721e_evm_a72_defconfig O=/tmp/a72 - $ make CROSS_COMPILE=aarch64-linux-gnu- ATF=<path to ATF dir>/build/k3/generic/release/bl31.bin TEE=<path to OPTEE OS dir>/out/arm-plat-k3/core/tee-pager_v2.bin DM=<path to DM firmware image> O=/tmp/a72 + $ make CROSS_COMPILE=aarch64-linux-gnu- j721e_evm_a72_defconfig O=build/a72 + $ make CROSS_COMPILE=aarch64-linux-gnu- ATF=<ATF dir>/build/k3/generic/release/bl31.bin TEE=<OPTEE OS dir>/out/arm-plat-k3/core/tee-pager_v2.bin DM=DM=<DM firmware>/ti-dm/j721e/ipc_echo_testb_mcu1_0_release_strip.xer5f O=build/a72 Target Images --------------
Signature · 1 line
2.37.3
Quoted 26 lines · Andrew Davis
J721e needs DM firmware when using updated SYSFW. Add steps to fetch, build, and deploy the same.
Signed-off-by Andrew Davis <[email protected]>--- doc/board/ti/j721e_evm.rst | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-)doc/board/ti/j721e_evm.rst +5
-1@@ -142,7 +142,11 @@ Sources: Tree: https://github.com/OP-TEE/optee_os.git Branch: master -4. U-Boot: +4. DM: + Tree: git://git.ti.com/processor-firmware/ti-linux-firmware.git + Branch: ti-linux-firmware + +5. U-Boot: Tree: https://source.denx.de/u-boot/u-boot Branch: master
doc/board/ti/j721e_evm.rst Build procedure: · line 157
Quoted 2 lines
doc/board/ti/j721e_evm.rst +0
-0@@ -152,7 +156,7 @@ Build procedure: .. code-block:: text
Thanks for updating the documentation.
The code-blocks look like bash and not text. Please, correct this information to allow syntax highlighting.
doc/board/ti/j721e_evm.rst Build procedure: · line 159
Quoted 3 lines
doc/board/ti/j721e_evm.rst +1
-1- $ make CROSS_COMPILE=arm-linux-gnueabihf- + $ make CROSS_COMPILE=arm-linux-gnueabihf- SOC=j721e
Please, remove the leading $-signs which are not helpful when copying to the console.
Please indent code blocks by 4 spaces. Otherwise Sphinx cannot recognize them.
Best regards
Heinrich
Quoted 23 lines
doc/board/ti/j721e_evm.rst +4
-42. ATF:@@ -172,15 +176,15 @@ Build procedure: .. code-block:: text - $ make CROSS_COMPILE=arm-linux-gnueabihf- j721e_evm_r5_defconfig O=/tmp/r5 - $ make CROSS_COMPILE=arm-linux-gnueabihf- O=/tmp/r5 + $ make CROSS_COMPILE=arm-linux-gnueabihf- j721e_evm_r5_defconfig O=build/r5 + $ make CROSS_COMPILE=arm-linux-gnueabihf- O=build/r5 * 4.2 A72: .. code-block:: text - $ make CROSS_COMPILE=aarch64-linux-gnu- j721e_evm_a72_defconfig O=/tmp/a72 - $ make CROSS_COMPILE=aarch64-linux-gnu- ATF=<path to ATF dir>/build/k3/generic/release/bl31.bin TEE=<path to OPTEE OS dir>/out/arm-plat-k3/core/tee-pager_v2.bin DM=<path to DM firmware image> O=/tmp/a72 + $ make CROSS_COMPILE=aarch64-linux-gnu- j721e_evm_a72_defconfig O=build/a72 + $ make CROSS_COMPILE=aarch64-linux-gnu- ATF=<ATF dir>/build/k3/generic/release/bl31.bin TEE=<OPTEE OS dir>/out/arm-plat-k3/core/tee-pager_v2.bin DM=DM=<DM firmware>/ti-dm/j721e/ipc_echo_testb_mcu1_0_release_strip.xer5f O=build/a72 Target Images --------------
Quoted 36 lines · Heinrich Schuchardt
Quoted 27 lines · Andrew Davis
J721e needs DM firmware when using updated SYSFW. Add steps to fetch, build, and deploy the same.
Signed-off-by Andrew Davis <[email protected]>---
doc/board/ti/j721e_evm.rst| 16 ++++++++++------1 file changed, 10 insertions(+), 6 deletions(-)doc/board/ti/j721e_evm.rst +0
-0@@ -142,7 +142,11 @@ Sources:Tree: https://github.com/OP-TEE/optee_os.git
Branch: master-4. U-Boot:
+4. DM:
+ Tree:git://git.ti.com/processor-firmware/ti-linux-firmware.git
+ Branch: ti-linux-firmware
+
+5. U-Boot:
Tree: https://source.denx.de/u-boot/u-boot
Branch: masterdoc/board/ti/j721e_evm.rst +0
-0@@ -152,7 +156,7 @@ Build procedure:Quoted 1 line
.. code-block:: text
Thanks for updating the documentation.
The code-blocks look like bash and not text. Please, correct this information to allow syntax highlighting.
Quoted 1 line
Quoted 9 lines
Quoted 2 lines
- $ make CROSS_COMPILE=arm-linux-gnueabihf-
+ $ make CROSS_COMPILE=arm-linux-gnueabihf- SOC=j721ePlease, remove the leading $-signs which are not helpful when copying to the console.
Please indent code blocks by 4 spaces. Otherwise Sphinx cannot recognize them.
Will fix all the code blocks then in a single patch, add it to this as a follow up in a series.
Thanks,
Andrew
Quoted 28 lines
Best regards
Heinrich
Quoted 23 lines
2. ATF:
doc/board/ti/j721e_evm.rst +0
-0@@ -172,15 +176,15 @@ Build procedure:.. code-block:: text
- $ make CROSS_COMPILE=arm-linux-gnueabihf-
j721e_evm_r5_defconfigO=/tmp/r5
- $ make CROSS_COMPILE=arm-linux-gnueabihf- O=/tmp/r5
+ $ make CROSS_COMPILE=arm-linux-gnueabihf-j721e_evm_r5_defconfigO=build/r5
+ $ make CROSS_COMPILE=arm-linux-gnueabihf- O=build/r5* 4.2 A72:
.. code-block:: text
- $ make CROSS_COMPILE=aarch64-linux-gnu-
j721e_evm_a72_defconfigO=/tmp/a72
- $ make CROSS_COMPILE=aarch64-linux-gnu- ATF=<path to ATF dir>/build/k3/generic/release/bl31.bin TEE=<path to OPTEE OS dir>/out/arm-plat-k3/core/tee-pager_v2.bin DM=<path to DM firmware image> O=/tmp/a72
+ $ make CROSS_COMPILE=aarch64-linux-gnu-j721e_evm_a72_defconfigO=build/a72
+ $ make CROSS_COMPILE=aarch64-linux-gnu- ATF=<ATF dir>/build/k3/generic/release/bl31.bin TEE=<OPTEE OS dir>/out/arm-plat-k3/core/tee-pager_v2.bin DM=DM=<DM firmware>/ti-dm/j721e/ipc_echo_testb_mcu1_0_release_strip.xer5f O=build/a72Target Images
--------------
Quoted 18 lines · Andrew Davis
Quoted 17 lines · Heinrich Schuchardt
Quoted 16 lines · Andrew Davis
J721e needs DM firmware when using updated SYSFW. Add steps to fetch, build, and deploy the same.
Signed-off-by Andrew Davis <[email protected]>---
doc/board/ti/j721e_evm.rst| 16 ++++++++++------1 file changed, 10 insertions(+), 6 deletions(-)doc/board/ti/j721e_evm.rst +0
-0@@ -142,7 +142,11 @@ Sources:Tree: https://github.com/OP-TEE/optee_os.git
Branch: master
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
-4. U-Boot:
+4. DM:
DM in the context of U-Boot is used as abbreviation for driver model.
Please, provide a meaningful title.
Best regards
Heinrich
Quoted 74 lines
Quoted 17 lines
Quoted 10 lines
+ Tree:
git://git.ti.com/processor-firmware/ti-linux-firmware.git
+ Branch: ti-linux-firmware
+
+5. U-Boot:
Tree: https://source.denx.de/u-boot/u-boot
Branch: masterdoc/board/ti/j721e_evm.rst +0
-0@@ -152,7 +156,7 @@ Build procedure:.. code-block:: text
Thanks for updating the documentation.
The code-blocks look like bash and not text. Please, correct this information to allow syntax highlighting.
Quoted 1 line
Quoted 9 lines
Quoted 2 lines
- $ make CROSS_COMPILE=arm-linux-gnueabihf-
+ $ make CROSS_COMPILE=arm-linux-gnueabihf- SOC=j721ePlease, remove the leading $-signs which are not helpful when copying to the console.
Please indent code blocks by 4 spaces. Otherwise Sphinx cannot recognize them.
Will fix all the code blocks then in a single patch, add it to this as a follow up in a series.
Thanks,
AndrewQuoted 39 lines
Best regards
Heinrich
Quoted 34 lines
2. ATF:
doc/board/ti/j721e_evm.rst +0
-0@@ -172,15 +176,15 @@ Build procedure:.. code-block:: text
- $ make CROSS_COMPILE=arm-linux-gnueabihf-
j721e_evm_r5_defconfigO=/tmp/r5
- $ make CROSS_COMPILE=arm-linux-gnueabihf- O=/tmp/r5
+ $ make CROSS_COMPILE=arm-linux-gnueabihf-j721e_evm_r5_defconfigO=build/r5
+ $ make CROSS_COMPILE=arm-linux-gnueabihf- O=build/r5* 4.2 A72:
.. code-block:: text
- $ make CROSS_COMPILE=aarch64-linux-gnu-
j721e_evm_a72_defconfigO=/tmp/a72
- $ make CROSS_COMPILE=aarch64-linux-gnu- ATF=<path to ATF dir>/build/k3/generic/release/bl31.bin TEE=<path to OPTEE OS dir>/out/arm-plat-k3/core/tee-pager_v2.bin DM=<path to DM firmware image> O=/tmp/a72
+ $ make CROSS_COMPILE=aarch64-linux-gnu-j721e_evm_a72_defconfigO=build/a72
+ $ make CROSS_COMPILE=aarch64-linux-gnu- ATF=<ATF dir>/build/k3/generic/release/bl31.bin TEE=<OPTEE OS dir>/out/arm-plat-k3/core/tee-pager_v2.bin DM=DM=<DM firmware>/ti-dm/j721e/ipc_echo_testb_mcu1_0_release_strip.xer5f O=build/a72Target Images
--------------
Quoted 19 lines · Heinrich Schuchardt
Quoted 18 lines · Andrew Davis
Quoted 17 lines · Heinrich Schuchardt
Quoted 16 lines · Andrew Davis
J721e needs DM firmware when using updated SYSFW. Add steps to fetch, build, and deploy the same.
Signed-off-by Andrew Davis <[email protected]>---
doc/board/ti/j721e_evm.rst| 16 ++++++++++------1 file changed, 10 insertions(+), 6 deletions(-)doc/board/ti/j721e_evm.rst +0
-0@@ -142,7 +142,11 @@ Sources:Tree: https://github.com/OP-TEE/optee_os.git
Branch: master
Quoted 7 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
-4. U-Boot:
+4. DM:DM in the context of U-Boot is used as abbreviation for driver model.
Please, provide a meaningful title.
Will rename to "DM Firmware" for v3.
Thanks,
Andrew
Quoted 79 lines
Best regards
Heinrich
Quoted 74 lines
Quoted 17 lines
Quoted 10 lines
+ Tree:
git://git.ti.com/processor-firmware/ti-linux-firmware.git
+ Branch: ti-linux-firmware
+
+5. U-Boot:
Tree: https://source.denx.de/u-boot/u-boot
Branch: masterdoc/board/ti/j721e_evm.rst +0
-0@@ -152,7 +156,7 @@ Build procedure:.. code-block:: text
Thanks for updating the documentation.
The code-blocks look like bash and not text. Please, correct this information to allow syntax highlighting.
Quoted 1 line
Quoted 9 lines
Quoted 2 lines
- $ make CROSS_COMPILE=arm-linux-gnueabihf-
+ $ make CROSS_COMPILE=arm-linux-gnueabihf- SOC=j721ePlease, remove the leading $-signs which are not helpful when copying to the console.
Please indent code blocks by 4 spaces. Otherwise Sphinx cannot recognize them.
Will fix all the code blocks then in a single patch, add it to this as a follow up in a series.
Thanks,
AndrewQuoted 39 lines
Best regards
Heinrich
Quoted 34 lines
2. ATF:
doc/board/ti/j721e_evm.rst +0
-0@@ -172,15 +176,15 @@ Build procedure:.. code-block:: text
- $ make CROSS_COMPILE=arm-linux-gnueabihf-
j721e_evm_r5_defconfigO=/tmp/r5
- $ make CROSS_COMPILE=arm-linux-gnueabihf- O=/tmp/r5
+ $ make CROSS_COMPILE=arm-linux-gnueabihf-j721e_evm_r5_defconfigO=build/r5
+ $ make CROSS_COMPILE=arm-linux-gnueabihf- O=build/r5* 4.2 A72:
.. code-block:: text
- $ make CROSS_COMPILE=aarch64-linux-gnu-
j721e_evm_a72_defconfigO=/tmp/a72
- $ make CROSS_COMPILE=aarch64-linux-gnu- ATF=<path to ATF dir>/build/k3/generic/release/bl31.bin TEE=<path to OPTEE OS dir>/out/arm-plat-k3/core/tee-pager_v2.bin DM=<path to DM firmware image> O=/tmp/a72
+ $ make CROSS_COMPILE=aarch64-linux-gnu-j721e_evm_a72_defconfigO=build/a72
+ $ make CROSS_COMPILE=aarch64-linux-gnu- ATF=<ATF dir>/build/k3/generic/release/bl31.bin TEE=<OPTEE OS dir>/out/arm-plat-k3/core/tee-pager_v2.bin DM=DM=<DM firmware>/ti-dm/j721e/ipc_echo_testb_mcu1_0_release_strip.xer5f O=build/a72Target Images
--------------