wifi: brcmfmac: fix invalid address access when enabling SCAN log level
Subsystems (7)
Sasha Levin
maintainerPATCH 1/23 wifi: brcmfmac: fix invalid address access when enabling SCAN log level
From: Wright Feng <[email protected]>
[ Upstream commit aa666b68e73fc06d83c070d96180b9010cf5a960 ]
The variable i is changed when setting random MAC address and causes invalid address access when printing the value of pi->reqs[i]->reqid.
We replace reqs index with ri to fix the issue.
[ 136.726473] Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000000 [ 136.737365] Mem abort info: [ 136.740172] ESR = 0x96000004 [ 136.743359] Exception class = DABT (current EL), IL = 32 bits [ 136.749294] SET = 0, FnV = 0 [ 136.752481] EA = 0, S1PTW = 0 [ 136.755635] Data abort info: [ 136.758514] ISV = 0, ISS = 0x00000004 [ 136.762487] CM = 0, WnR = 0 [ 136.765522] user pgtable: 4k pages, 48-bit VAs, pgdp = 000000005c4e2577 [ 136.772265] [0000000000000000] pgd=0000000000000000 [ 136.777160] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 136.782732] Modules linked in: brcmfmac(O) brcmutil(O) cfg80211(O) compat(O) [ 136.789788] Process wificond (pid: 3175, stack limit = 0x00000000053048fb) [ 136.796664] CPU: 3 PID: 3175 Comm: wificond Tainted: G O 4.19.42-00001-g531a5f5 #1 [ 136.805532] Hardware name: Freescale i.MX8MQ EVK (DT) [ 136.810584] pstate: 60400005 (nZCv daif +PAN -UAO) [ 136.815429] pc : brcmf_pno_config_sched_scans+0x6cc/0xa80 [brcmfmac] [ 136.821811] lr : brcmf_pno_config_sched_scans+0x67c/0xa80 [brcmfmac] [ 136.828162] sp : ffff00000e9a3880 [ 136.831475] x29: ffff00000e9a3890 x28: ffff800020543400 [ 136.836786] x27: ffff8000b1008880 x26: ffff0000012bf6a0 [ 136.842098] x25: ffff80002054345c x24: ffff800088d22400 [ 136.847409] x23: ffff0000012bf638 x22: ffff0000012bf6d8 [ 136.852721] x21: ffff8000aced8fc0 x20: ffff8000ac164400 [ 136.858032] x19: ffff00000e9a3946 x18: 0000000000000000 [ 136.863343] x17: 0000000000000000 x16: 0000000000000000 [ 136.868655] x15: ffff0000093f3b37 x14: 0000000000000050 [ 136.873966] x13: 0000000000003135 x12: 0000000000000000 [ 136.879277] x11: 0000000000000000 x10: ffff000009a61888 [ 136.884589] x9 : 000000000000000f x8 : 0000000000000008 [ 136.889900] x7 : 303a32303d726464 x6 : ffff00000a1f957d [ 136.895211] x5 : 0000000000000000 x4 : ffff00000e9a3942 [ 136.900523] x3 : 0000000000000000 x2 : ffff0000012cead8 [ 136.905834] x1 : ffff0000012bf6d8 x0 : 0000000000000000 [ 136.911146] Call trace: [ 136.913623] brcmf_pno_config_sched_scans+0x6cc/0xa80 [brcmfmac] [ 136.919658] brcmf_pno_start_sched_scan+0xa4/0x118 [brcmfmac] [ 136.925430] brcmf_cfg80211_sched_scan_start+0x80/0xe0 [brcmfmac] [ 136.931636] nl80211_start_sched_scan+0x140/0x308 [cfg80211] [ 136.937298] genl_rcv_msg+0x358/0x3f4 [ 136.940960] netlink_rcv_skb+0xb4/0x118 [ 136.944795] genl_rcv+0x34/0x48 [ 136.947935] netlink_unicast+0x264/0x300 [ 136.951856] netlink_sendmsg+0x2e4/0x33c [ 136.955781] __sys_sendto+0x120/0x19c
--- .../net/wireless/broadcom/brcm80211/brcmfmac/pno.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c +6 -6
@@ -163,12 +163,12 @@ static int brcmf_pno_set_random(struct brcmf_if *ifp, struct brcmf_pno_info *pi)struct brcmf_pno_macaddr_le pfn_mac;u8 *mac_addr =NULL ;u8 *mac_mask =NULL ; -int err, i; +int err, i, ri; -for (i =0 ; i < pi->n_reqs; i++) -if (pi->reqs[i]->flags &NL80211_SCAN_FLAG_RANDOM_ADDR ) { - mac_addr = pi->reqs[i]->mac_addr; - mac_mask = pi->reqs[i]->mac_addr_mask; +for (ri =0 ; ri < pi->n_reqs; ri++) +if (pi->reqs[ri]->flags &NL80211_SCAN_FLAG_RANDOM_ADDR ) { + mac_addr = pi->reqs[ri]->mac_addr; + mac_mask = pi->reqs[ri]->mac_addr_mask;break ; }
@@ -190,7 +190,7 @@ static int brcmf_pno_set_random(struct brcmf_if *ifp, struct brcmf_pno_info *pi) pfn_mac.mac[0 ] |=0x02 ;brcmf_dbg (SCAN ,"enabling random mac: reqid=%llu mac=%pM\n" , - pi->reqs[i]->reqid, pfn_mac.mac); + pi->reqs[ri]->reqid, pfn_mac.mac); err =brcmf_fil_iovar_data_set (ifp,"pfn_macaddr" , &pfn_mac,sizeof (pfn_mac));if (err)
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 2/23 openvswitch: Fix double reporting of drops in dropwatch
From: Mike Pattrick <[email protected]>
[ Upstream commit 1100248a5c5ccd57059eb8d02ec077e839a23826 ]
Frames sent to userspace can be reported as dropped in ovs_dp_process_packet, however, if they are dropped in the netlink code then netlink_attachskb will report the same frame as dropped.
This patch checks for error codes which indicate that the frame has already been freed.
--- net/openvswitch/datapath.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-)
net/openvswitch/datapath.c +10 -3
@@ -276,10 +276,17 @@ void ovs_dp_process_packet(struct sk_buff *skb, struct sw_flow_key *key) upcall.portid =ovs_vport_find_upcall_portid (p, skb); upcall.mru =OVS_CB (skb)->mru; error =ovs_dp_upcall (dp, skb, key, &upcall,0 ); -if (unlikely (error)) -kfree_skb (skb); -else +switch (error) { +case 0 : +case -EAGAIN : +case -ERESTARTSYS : +case -EINTR :consume_skb (skb); +break ; +default : +kfree_skb (skb); +break ; + } stats_counter = &stats->n_missed; goto out; }
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 3/23 openvswitch: Fix overreporting of drops in dropwatch
In reply to Sasha LevinFrom: Mike Pattrick <[email protected]>
[ Upstream commit c21ab2afa2c64896a7f0e3cbc6845ec63dcfad2e ]
Currently queue_userspace_packet will call kfree_skb for all frames, whether or not an error occurred. This can result in a single dropped frame being reported as multiple drops in dropwatch. This functions caller may also call kfree_skb in case of an error. This patch will consume the skbs instead and allow caller's to use kfree_skb.
--- net/openvswitch/datapath.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
net/openvswitch/datapath.c +3 -2
@@ -553,8 +553,9 @@ static int queue_userspace_packet(struct datapath *dp, struct sk_buff *skb, out:if (err)skb_tx_error (skb); -kfree_skb (user_skb); -kfree_skb (nskb); +consume_skb (user_skb); +consume_skb (nskb); +return err; }
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 4/23 tcp: annotate data-race around tcp_md5sig_pool_populated
In reply to Sasha LevinFrom: Eric Dumazet <[email protected]>
[ Upstream commit aacd467c0a576e5e44d2de4205855dc0fe43f6fb ]
tcp_md5sig_pool_populated can be read while another thread changes its value.
The race has no consequence because allocations are protected with tcp_md5sig_mutex.
This patch adds READ_ONCE() and WRITE_ONCE() to document the race and silence KCSAN.
--- net/ipv4/tcp.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-)
net/ipv4/tcp.c +10 -4
@@ -3316,12 +3316,16 @@ static void __tcp_alloc_md5sig_pool(void)* to memory. See smp_rmb() in tcp_get_md5sig_pool() */ smp_wmb (); - tcp_md5sig_pool_populated = true; +/* Paired with READ_ONCE() from tcp_alloc_md5sig_pool() +* and tcp_get_md5sig_pool(). +*/ +WRITE_ONCE (tcp_md5sig_pool_populated, true); }bool tcp_alloc_md5sig_pool (void ) { -if (unlikely (!tcp_md5sig_pool_populated)) { +/* Paired with WRITE_ONCE() from __tcp_alloc_md5sig_pool() */ +if (unlikely (!READ_ONCE (tcp_md5sig_pool_populated))) {mutex_lock (&tcp_md5sig_mutex);if (!tcp_md5sig_pool_populated)
@@ -3329,7 +3333,8 @@ bool tcp_alloc_md5sig_pool(void)mutex_unlock (&tcp_md5sig_mutex); } -return tcp_md5sig_pool_populated; +/* Paired with WRITE_ONCE() from __tcp_alloc_md5sig_pool() */ +return READ_ONCE (tcp_md5sig_pool_populated); }EXPORT_SYMBOL (tcp_alloc_md5sig_pool);
@@ -3345,7 +3350,8 @@ struct tcp_md5sig_pool *tcp_get_md5sig_pool(void) {local_bh_disable (); -if (tcp_md5sig_pool_populated) { +/* Paired with WRITE_ONCE() from __tcp_alloc_md5sig_pool() */ +if (READ_ONCE (tcp_md5sig_pool_populated)) {/* coupled with smp_wmb() in __tcp_alloc_md5sig_pool() */ smp_rmb ();return this_cpu_ptr (&tcp_md5sig_pool);
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 5/23 wifi: ath9k: avoid uninit memory read in ath9k_htc_rx_msg()
In reply to Sasha LevinFrom: Tetsuo Handa <[email protected]>
[ Upstream commit b383e8abed41cc6ff1a3b34de75df9397fa4878c ]
syzbot is reporting uninit value at ath9k_htc_rx_msg() [1], for ioctl(USB_RAW_IOCTL_EP_WRITE) can call ath9k_hif_usb_rx_stream() with pkt_len = 0 but ath9k_hif_usb_rx_stream() uses __dev_alloc_skb(pkt_len + 32, GFP_ATOMIC) based on an assumption that pkt_len is valid. As a result, ath9k_hif_usb_rx_stream() allocates skb with uninitialized memory and ath9k_htc_rx_msg() is reading from uninitialized memory.
Since bytes accessed by ath9k_htc_rx_msg() is not known until ath9k_htc_rx_msg() is called, it would be difficult to check minimal valid pkt_len at "if (pkt_len > 2 * MAX_RX_BUF_SIZE) {" line in ath9k_hif_usb_rx_stream().
We have two choices. One is to workaround by adding __GFP_ZERO so that ath9k_htc_rx_msg() sees 0 if pkt_len is invalid. The other is to let ath9k_htc_rx_msg() validate pkt_len before accessing. This patch chose the latter.
Note that I'm not sure threshold condition is correct, for I can't find details on possible packet length used by this protocol.
--- drivers/net/wireless/ath/ath9k/htc_hst.c | 43 +++++++++++++++--------- 1 file changed, 28 insertions(+), 15 deletions(-)
drivers/net/wireless/ath/ath9k/htc_hst.c +28 -15
@@ -367,33 +367,27 @@ void ath9k_htc_txcompletion_cb(struct htc_target *htc_handle, }static void ath9k_htc_fw_panic_report (struct htc_target *htc_handle, -struct sk_buff *skb) +struct sk_buff *skb,u32 len) {uint32_t *pattern = (uint32_t *)skb->data; -switch (*pattern) { -case 0x33221199 : - { +if (*pattern ==0x33221199 && len >=sizeof (struct htc_panic_bad_vaddr )) {struct htc_panic_bad_vaddr *htc_panic; htc_panic = (struct htc_panic_bad_vaddr *) skb->data;dev_err (htc_handle->dev,"ath: firmware panic! " "exccause: 0x%08x; pc: 0x%08x; badvaddr: 0x%08x.\n" , htc_panic->exccause, htc_panic->pc, htc_panic->badvaddr); -break ; - } -case 0x33221299 : - { +return ; + } +if (*pattern ==0x33221299 ) {struct htc_panic_bad_epid *htc_panic; htc_panic = (struct htc_panic_bad_epid *) skb->data;dev_err (htc_handle->dev,"ath: firmware panic! " "bad epid: 0x%08x\n" , htc_panic->epid); -break ; - } -default : -dev_err (htc_handle->dev,"ath: unknown panic pattern!\n" ); -break ; +return ; } +dev_err (htc_handle->dev,"ath: unknown panic pattern!\n" ); }/*
@@ -414,16 +408,26 @@ void ath9k_htc_rx_msg(struct htc_target *htc_handle,if (!htc_handle || !skb)return ; +/* A valid message requires len >= 8. +* +* sizeof(struct htc_frame_hdr) == 8 +* sizeof(struct htc_ready_msg) == 8 +* sizeof(struct htc_panic_bad_vaddr) == 16 +* sizeof(struct htc_panic_bad_epid) == 8 +*/ +if (unlikely (len <sizeof (struct htc_frame_hdr ))) + goto invalid; htc_hdr = (struct htc_frame_hdr *) skb->data; epid = htc_hdr->endpoint_id;if (epid ==0x99 ) { -ath9k_htc_fw_panic_report (htc_handle, skb); +ath9k_htc_fw_panic_report (htc_handle, skb, len);kfree_skb (skb);return ; }if (epid <0 || epid >=ENDPOINT_MAX ) { +invalid:if (pipe_id !=USB_REG_IN_PIPE )dev_kfree_skb_any (skb);else
@@ -435,21 +439,30 @@ void ath9k_htc_rx_msg(struct htc_target *htc_handle,/* Handle trailer */ if (htc_hdr->flags &HTC_FLAGS_RECV_TRAILER ) { -if (be32_to_cpu (*(__be32 *) skb->data) ==0x00C60000 ) +if (be32_to_cpu (*(__be32 *) skb->data) ==0x00C60000 ) {/* Move past the Watchdog pattern */ htc_hdr = (struct htc_frame_hdr *)(skb->data +4 ); + len -=4 ; + } }/* Get the message ID */ +if (unlikely (len <sizeof (struct htc_frame_hdr ) +sizeof (__be16))) + goto invalid; msg_id = (__be16 *) ((void *) htc_hdr +sizeof (struct htc_frame_hdr ));/* Now process HTC messages */ switch (be16_to_cpu (*msg_id)) {case HTC_MSG_READY_ID : +if (unlikely (len <sizeof (struct htc_ready_msg ))) + goto invalid;htc_process_target_rdy (htc_handle, htc_hdr);break ;case HTC_MSG_CONNECT_SERVICE_RESPONSE_ID : +if (unlikely (len <sizeof (struct htc_frame_hdr ) + +sizeof (struct htc_conn_svc_rspmsg ))) + goto invalid;htc_process_conn_rsp (htc_handle, htc_hdr);break ;default :
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 6/23 xfrm: Update ipcomp_scratches with NULL when freed
In reply to Sasha LevinFrom: Khalid Masum <[email protected]>
[ Upstream commit 8a04d2fc700f717104bfb95b0f6694e448a4537f ]
Currently if ipcomp_alloc_scratches() fails to allocate memory ipcomp_scratches holds obsolete address. So when we try to free the percpu scratches using ipcomp_free_scratches() it tries to vfree non existent vm area. Described below:
static void * __percpu *ipcomp_alloc_scratches(void)
{
...
scratches = alloc_percpu(void *);
if (!scratches)
return NULL;
ipcomp_scratches does not know about this allocation failure.
Therefore holding the old obsolete address.
...
}So when we free,
static void ipcomp_free_scratches(void)
{
...
scratches = ipcomp_scratches;Assigning obsolete address from ipcomp_scratches
if (!scratches)
return;
for_each_possible_cpu(i)
vfree(*per_cpu_ptr(scratches, i));
Trying to free non existent page, causing warning: trying to vfree
existent vm area.
...
}Fix this breakage by updating ipcomp_scrtches with NULL when scratches is freed
--- net/xfrm/xfrm_ipcomp.c | 1 + 1 file changed, 1 insertion(+)
net/xfrm/xfrm_ipcomp.c +1 -0
@@ -216,6 +216,7 @@ static void ipcomp_free_scratches(void)vfree (*per_cpu_ptr (scratches, i));free_percpu (scratches); + ipcomp_scratches =NULL ; }static void *__percpu *ipcomp_alloc_scratches (void )
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 7/23 net: xscale: Fix return type for implementation of ndo_start_xmit
In reply to Sasha LevinFrom: GUO Zihua <[email protected]>
[ Upstream commit 0dbaf0fa62329d9fe452d9041a707a33f6274f1f ]
Since Linux now supports CFI, it will be a good idea to fix mismatched return type for implementation of hooks. Otherwise this might get cought out by CFI and cause a panic.
eth_xmit() would return either NETDEV_TX_BUSY or NETDEV_TX_OK, so change the return type to netdev_tx_t directly.
--- drivers/net/ethernet/xscale/ixp4xx_eth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/xscale/ixp4xx_eth.c +1 -1
@@ -835,7 +835,7 @@ static void eth_txdone_irq(void *unused) } } -static int eth_xmit (struct sk_buff *skb,struct net_device *dev) +static netdev_tx_t eth_xmit (struct sk_buff *skb,struct net_device *dev) {struct port *port =netdev_priv (dev);unsigned int txreadyq = port->plat->txreadyq;
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 8/23 net: lantiq_etop: Fix return type for implementation of ndo_start_xmit
In reply to Sasha LevinFrom: GUO Zihua <[email protected]>
[ Upstream commit c8ef3c94bda0e21123202d057d4a299698fa0ed9 ]
Since Linux now supports CFI, it will be a good idea to fix mismatched return type for implementation of hooks. Otherwise this might get cought out by CFI and cause a panic.
ltq_etop_tx() would return either NETDEV_TX_BUSY or NETDEV_TX_OK, so change the return type to netdev_tx_t directly.
--- drivers/net/ethernet/lantiq_etop.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/lantiq_etop.c +1 -1
@@ -464,7 +464,7 @@ ltq_etop_stop(struct net_device *dev)return 0 ; } -static int +static netdev_tx_t ltq_etop_tx (struct sk_buff *skb,struct net_device *dev) {int queue =skb_get_queue_mapping (skb);
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 9/23 net: ftmac100: fix endianness-related issues from 'sparse'
In reply to Sasha LevinFrom: Sergei Antonov <[email protected]>
[ Upstream commit 9df696b3b3a4c96c3219eb87c7bf03fb50e490b8 ]
Sparse found a number of endianness-related issues of these kinds:
.../ftmac100.c:192:32: warning: restricted __le32 degrades to integer
.../ftmac100.c:208:23: warning: incorrect type in assignment (different base types).../ftmac100.c:208:23: expected unsigned int rxdes0.../ftmac100.c:208:23: got restricted __le32 [usertype]
.../ftmac100.c:249:23: warning: invalid assignment: &=.../ftmac100.c:249:23: left side has type unsigned int.../ftmac100.c:249:23: right side has type restricted __le32
.../ftmac100.c:527:16: warning: cast to restricted __le32
Change type of some fields from 'unsigned int' to '__le32' to fix it.
--- drivers/net/ethernet/faraday/ftmac100.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/net/ethernet/faraday/ftmac100.h +6 -6
@@ -135,9 +135,9 @@* Transmit descriptor, aligned to 16 bytes */ struct ftmac100_txdes { -unsigned int txdes0; -unsigned int txdes1; -unsigned int txdes2;/* TXBUF_BADR */ +__le32 txdes0; +__le32 txdes1; +__le32 txdes2;/* TXBUF_BADR */ unsigned int txdes3;/* not used by HW */ } __attribute__ ((aligned (16 )));
@@ -156,9 +156,9 @@ struct ftmac100_txdes {* Receive descriptor, aligned to 16 bytes */ struct ftmac100_rxdes { -unsigned int rxdes0; -unsigned int rxdes1; -unsigned int rxdes2;/* RXBUF_BADR */ +__le32 rxdes0; +__le32 rxdes1; +__le32 rxdes2;/* RXBUF_BADR */ unsigned int rxdes3;/* not used by HW */ } __attribute__ ((aligned (16 )));
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 10/23 wifi: brcmfmac: fix use-after-free bug in brcmf_netdev_start_xmit()
In reply to Sasha LevinFrom: Alexander Coffin <[email protected]>
[ Upstream commit 3f42faf6db431e04bf942d2ebe3ae88975723478 ]
Quoted 1 line
ret =
brcmf_proto_tx_queue_data(drvr, ifp->ifidx, skb);
may be schedule, and then complete before the line
Quoted 1 line
ndev->stats.tx_bytes+=skb->len;
[ 46.912801] ================================================================== [ 46.920552] BUG: KASAN: use-after-free in brcmf_netdev_start_xmit+0x718/0x8c8 [brcmfmac] [ 46.928673] Read of size 4 at addr ffffff803f5882e8 by task systemd-resolve/328 [ 46.935991] [ 46.937514] CPU: 1 PID: 328 Comm: systemd-resolve Tainted: G O 5.4.199-[REDACTED] #1 [ 46.947255] Hardware name: [REDACTED] [ 46.954568] Call trace: [ 46.957037] dump_backtrace+0x0/0x2b8 [ 46.960719] show_stack+0x24/0x30 [ 46.964052] dump_stack+0x128/0x194 [ 46.967557] print_address_description.isra.0+0x64/0x380 [ 46.972877] __kasan_report+0x1d4/0x240 [ 46.976723] kasan_report+0xc/0x18 [ 46.980138] __asan_report_load4_noabort+0x18/0x20 [ 46.985027] brcmf_netdev_start_xmit+0x718/0x8c8 [brcmfmac] [ 46.990613] dev_hard_start_xmit+0x1bc/0xda0 [ 46.994894] sch_direct_xmit+0x198/0xd08 [ 46.998827] __qdisc_run+0x37c/0x1dc0 [ 47.002500] __dev_queue_xmit+0x1528/0x21f8 [ 47.006692] dev_queue_xmit+0x24/0x30 [ 47.010366] neigh_resolve_output+0x37c/0x678 [ 47.014734] ip_finish_output2+0x598/0x2458 [ 47.018927] __ip_finish_output+0x300/0x730 [ 47.023118] ip_output+0x2e0/0x430 [ 47.026530] ip_local_out+0x90/0x140 [ 47.030117] igmpv3_sendpack+0x14c/0x228 [ 47.034049] igmpv3_send_cr+0x384/0x6b8 [ 47.037895] igmp_ifc_timer_expire+0x4c/0x118 [ 47.042262] call_timer_fn+0x1cc/0xbe8 [ 47.046021] __run_timers+0x4d8/0xb28 [ 47.049693] run_timer_softirq+0x24/0x40 [ 47.053626] __do_softirq+0x2c0/0x117c [ 47.057387] irq_exit+0x2dc/0x388 [ 47.060715] __handle_domain_irq+0xb4/0x158 [ 47.064908] gic_handle_irq+0x58/0xb0 [ 47.068581] el0_irq_naked+0x50/0x5c [ 47.072162] [ 47.073665] Allocated by task 328: [ 47.077083] save_stack+0x24/0xb0 [ 47.080410] __kasan_kmalloc.isra.0+0xc0/0xe0 [ 47.084776] kasan_slab_alloc+0x14/0x20 [ 47.088622] kmem_cache_alloc+0x15c/0x468 [ 47.092643] __alloc_skb+0xa4/0x498 [ 47.096142] igmpv3_newpack+0x158/0xd78 [ 47.099987] add_grhead+0x210/0x288 [ 47.103485] add_grec+0x6b0/0xb70 [ 47.106811] igmpv3_send_cr+0x2e0/0x6b8 [ 47.110657] igmp_ifc_timer_expire+0x4c/0x118 [ 47.115027] call_timer_fn+0x1cc/0xbe8 [ 47.118785] __run_timers+0x4d8/0xb28 [ 47.122457] run_timer_softirq+0x24/0x40 [ 47.126389] __do_softirq+0x2c0/0x117c [ 47.130142] [ 47.131643] Freed by task 180: [ 47.134712] save_stack+0x24/0xb0 [ 47.138041] __kasan_slab_free+0x108/0x180 [ 47.142146] kasan_slab_free+0x10/0x18 [ 47.145904] slab_free_freelist_hook+0xa4/0x1b0 [ 47.150444] kmem_cache_free+0x8c/0x528 [ 47.154292] kfree_skbmem+0x94/0x108 [ 47.157880] consume_skb+0x10c/0x5a8 [ 47.161466] __dev_kfree_skb_any+0x88/0xa0 [ 47.165598] brcmu_pkt_buf_free_skb+0x44/0x68 [brcmutil] [ 47.171023] brcmf_txfinalize+0xec/0x190 [brcmfmac] [ 47.176016] brcmf_proto_bcdc_txcomplete+0x1c0/0x210 [brcmfmac] [ 47.182056] brcmf_sdio_sendfromq+0x8dc/0x1e80 [brcmfmac] [ 47.187568] brcmf_sdio_dpc+0xb48/0x2108 [brcmfmac] [ 47.192529] brcmf_sdio_dataworker+0xc8/0x238 [brcmfmac] [ 47.197859] process_one_work+0x7fc/0x1a80 [ 47.201965] worker_thread+0x31c/0xc40 [ 47.205726] kthread+0x2d8/0x370 [ 47.208967] ret_from_fork+0x10/0x18 [ 47.212546] [ 47.214051] The buggy address belongs to the object at ffffff803f588280 [ 47.214051] which belongs to the cache skbuff_head_cache of size 208 [ 47.227086] The buggy address is located 104 bytes inside of [ 47.227086] 208-byte region [ffffff803f588280, ffffff803f588350) [ 47.238814] The buggy address belongs to the page: [ 47.243618] page:ffffffff00dd6200 refcount:1 mapcount:0 mapping:ffffff804b6bf800 index:0xffffff803f589900 compound_mapcount: 0 [ 47.255007] flags: 0x10200(slab|head) [ 47.258689] raw: 0000000000010200 ffffffff00dfa980 0000000200000002 ffffff804b6bf800 [ 47.266439] raw: ffffff803f589900 0000000080190018 00000001ffffffff 0000000000000000 [ 47.274180] page dumped because: kasan: bad access detected [ 47.279752] [ 47.281251] Memory state around the buggy address: [ 47.286051] ffffff803f588180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 47.293277] ffffff803f588200: fb fb fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 47.300502] >ffffff803f588280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 47.307723] ^ [ 47.314343] ffffff803f588300: fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc fc [ 47.321569] ffffff803f588380: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb [ 47.328789] ==================================================================
--- drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c +2 -1
@@ -200,6 +200,7 @@ static netdev_tx_t brcmf_netdev_start_xmit(struct sk_buff *skb,struct brcmf_pub *drvr = ifp->drvr;struct ethhdr *eh;int head_delta; +unsigned int tx_bytes = skb->len;brcmf_dbg (DATA ,"Enter, bsscfgidx=%d\n" , ifp->bsscfgidx);
@@ -254,7 +255,7 @@ static netdev_tx_t brcmf_netdev_start_xmit(struct sk_buff *skb, ndev->stats.tx_dropped++; }else { ndev->stats.tx_packets++; - ndev->stats.tx_bytes += skb->len; + ndev->stats.tx_bytes += tx_bytes; }/* Return ok: we always eat the packet */
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 11/23 Bluetooth: L2CAP: initialize delayed works at l2cap_chan_create()
In reply to Sasha LevinFrom: Tetsuo Handa <[email protected]>
[ Upstream commit 2d2cb3066f2c90cd8ca540b36ba7a55e7f2406e0 ]
syzbot is reporting cancel_delayed_work() without INIT_DELAYED_WORK() at l2cap_chan_del() [1], for CONF_NOT_COMPLETE flag (which meant to prevent l2cap_chan_del() from calling cancel_delayed_work()) is cleared by timer which fires before l2cap_chan_del() is called by closing file descriptor created by socket(AF_BLUETOOTH, SOCK_STREAM, BTPROTO_L2CAP).
l2cap_bredr_sig_cmd(L2CAP_CONF_REQ) and l2cap_bredr_sig_cmd(L2CAP_CONF_RSP) are calling l2cap_ertm_init(chan), and they call l2cap_chan_ready() (which clears CONF_NOT_COMPLETE flag) only when l2cap_ertm_init(chan) succeeded.
l2cap_sock_init() does not call l2cap_ertm_init(chan), and it instead sets CONF_NOT_COMPLETE flag by calling l2cap_chan_set_defaults(). However, when connect() is requested, "command 0x0409 tx timeout" happens after 2 seconds
from connect() request, and CONF_NOT_COMPLETE flag is cleared after 4
seconds from connect() request, for l2cap_conn_start() from l2cap_info_timeout() callback scheduled by
schedule_delayed_work(&conn->info_timer, L2CAP_INFO_TIMEOUT);
in l2cap_connect() is calling l2cap_chan_ready().
Fix this problem by initializing delayed works used by L2CAP_MODE_ERTM mode as soon as l2cap_chan_create() allocates a channel, like I did in commit be8597239379f0f5 ("Bluetooth: initialize skb_queue_head at l2cap_chan_create()").
--- net/bluetooth/l2cap_core.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)
net/bluetooth/l2cap_core.c +6 -4
@@ -63,6 +63,9 @@ static void l2cap_send_disconn_req(struct l2cap_chan *chan, int err);static void l2cap_tx (struct l2cap_chan *chan,struct l2cap_ctrl *control,struct sk_buff_head *skbs,u8 event); +static void l2cap_retrans_timeout (struct work_struct *work); +static void l2cap_monitor_timeout (struct work_struct *work); +static void l2cap_ack_timeout (struct work_struct *work);static inline u8 bdaddr_type (u8 link_type,u8 bdaddr_type) {
@@ -470,6 +473,9 @@ struct l2cap_chan *l2cap_chan_create(void)write_unlock (&chan_list_lock);INIT_DELAYED_WORK (&chan->chan_timer, l2cap_chan_timeout); +INIT_DELAYED_WORK (&chan->retrans_timer, l2cap_retrans_timeout); +INIT_DELAYED_WORK (&chan->monitor_timer, l2cap_monitor_timeout); +INIT_DELAYED_WORK (&chan->ack_timer, l2cap_ack_timeout); chan->state =BT_OPEN ;
@@ -3154,10 +3160,6 @@ int l2cap_ertm_init(struct l2cap_chan *chan) chan->rx_state =L2CAP_RX_STATE_RECV ; chan->tx_state =L2CAP_TX_STATE_XMIT ; -INIT_DELAYED_WORK (&chan->retrans_timer, l2cap_retrans_timeout); -INIT_DELAYED_WORK (&chan->monitor_timer, l2cap_monitor_timeout); -INIT_DELAYED_WORK (&chan->ack_timer, l2cap_ack_timeout); -skb_queue_head_init (&chan->srej_q); err =l2cap_seq_list_init (&chan->srej_list, chan->tx_win);
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 12/23 net: davicom: Fix return type of dm9000_start_xmit
In reply to Sasha LevinFrom: Nathan Huckleberry <[email protected]>
[ Upstream commit 0191580b000d50089a0b351f7cdbec4866e3d0d2 ]
The ndo_start_xmit field in net_device_ops is expected to be of type netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev).
The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition.
The return type of dm9000_start_xmit should be changed from int to netdev_tx_t.
--- drivers/net/ethernet/davicom/dm9000.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/davicom/dm9000.c +1 -1
@@ -1025,7 +1025,7 @@ static void dm9000_send_packet(struct net_device *dev,* Hardware start transmission. * Send a packet to media from the upper layer. */ -static int +static netdev_tx_t dm9000_start_xmit (struct sk_buff *skb,struct net_device *dev) {unsigned long flags;
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 13/23 net: ethernet: ti: davinci_emac: Fix return type of emac_dev_xmit
In reply to Sasha LevinFrom: Nathan Huckleberry <[email protected]>
[ Upstream commit 5972ca946098487c5155fe13654743f9010f5ed5 ]
The ndo_start_xmit field in net_device_ops is expected to be of type netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev).
The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition.
The return type of emac_dev_xmit should be changed from int to netdev_tx_t.
--- drivers/net/ethernet/ti/davinci_emac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/ti/davinci_emac.c +1 -1
@@ -955,7 +955,7 @@ static void emac_tx_handler(void *token, int len, int status)* * Returns success(NETDEV_TX_OK) or error code (typically out of desc's) */ -static int emac_dev_xmit (struct sk_buff *skb,struct net_device *ndev) +static netdev_tx_t emac_dev_xmit (struct sk_buff *skb,struct net_device *ndev) {struct device *emac_dev = &ndev->dev;int ret_code;
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 14/23 net: korina: Fix return type of korina_send_packet
In reply to Sasha LevinFrom: Nathan Huckleberry <[email protected]>
[ Upstream commit 106c67ce46f3c82dd276e983668a91d6ed631173 ]
The ndo_start_xmit field in net_device_ops is expected to be of type netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev).
The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition.
The return type of korina_send_packet should be changed from int to netdev_tx_t.
--- drivers/net/ethernet/korina.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/net/ethernet/korina.c +2 -1
@@ -193,7 +193,8 @@ static void korina_chain_rx(struct korina_private *lp, }/* transmit packet */ -static int korina_send_packet (struct sk_buff *skb,struct net_device *dev) +static netdev_tx_t korina_send_packet (struct sk_buff *skb, +struct net_device *dev) {struct korina_private *lp =netdev_priv (dev);unsigned long flags;
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 15/23 Bluetooth: hci_sysfs: Fix attempting to call device_add multiple times
In reply to Sasha LevinFrom: Luiz Augusto von Dentz <[email protected]>
[ Upstream commit 448a496f760664d3e2e79466aa1787e6abc922b5 ]
device_add shall not be called multiple times as stated in its documentation:
'Do not call this routine or device_register() more than once for any device structure'
Syzkaller reports a bug as follows [1]:
------------[ cut here ]------------ kernel BUG at lib/list_debug.c:33! invalid opcode: 0000 [#1] PREEMPT SMP KASAN [...] Call Trace: <TASK> __list_add include/linux/list.h:69 [inline] list_add_tail include/linux/list.h:102 [inline] kobj_kset_join lib/kobject.c:164 [inline] kobject_add_internal+0x18f/0x8f0 lib/kobject.c:214 kobject_add_varg lib/kobject.c:358 [inline] kobject_add+0x150/0x1c0 lib/kobject.c:410 device_add+0x368/0x1e90 drivers/base/core.c:3452 hci_conn_add_sysfs+0x9b/0x1b0 net/bluetooth/hci_sysfs.c:53 hci_le_cis_estabilished_evt+0x57c/0xae0 net/bluetooth/hci_event.c:6799 hci_le_meta_evt+0x2b8/0x510 net/bluetooth/hci_event.c:7110 hci_event_func net/bluetooth/hci_event.c:7440 [inline] hci_event_packet+0x63d/0xfd0 net/bluetooth/hci_event.c:7495 hci_rx_work+0xae7/0x1230 net/bluetooth/hci_core.c:4007 process_one_work+0x991/0x1610 kernel/workqueue.c:2289 worker_thread+0x665/0x1080 kernel/workqueue.c:2436 kthread+0x2e4/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 </TASK>
--- net/bluetooth/hci_sysfs.c | 3 +++ 1 file changed, 3 insertions(+)
net/bluetooth/hci_sysfs.c +3 -0
@@ -48,6 +48,9 @@ void hci_conn_add_sysfs(struct hci_conn *conn)BT_DBG ("conn %p" , conn); +if (device_is_registered (&conn->dev)) +return ; +dev_set_name (&conn->dev,"%s:%d" , hdev->name, conn->handle);if (device_add (&conn->dev) <0 ) {
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 16/23 can: bcm: check the result of can_send() in bcm_can_tx()
In reply to Sasha LevinFrom: Ziyang Xuan <[email protected]>
[ Upstream commit 3fd7bfd28cfd68ae80a2fe92ea1615722cc2ee6e ]
If can_send() fail, it should not update frames_abs counter in bcm_can_tx(). Add the result check for can_send() in bcm_can_tx().
--- net/can/bcm.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
net/can/bcm.c +4 -3
@@ -286,6 +286,7 @@ static void bcm_can_tx(struct bcm_op *op)struct sk_buff *skb;struct net_device *dev;struct canfd_frame *cf = op->frames + op->cfsiz * op->currframe; +int err;/* no target device? => exit */ if (!op->ifindex)
@@ -310,11 +311,11 @@ static void bcm_can_tx(struct bcm_op *op)/* send with loopback */ skb->dev = dev;can_skb_set_owner (skb, op->sk); -can_send (skb,1 ); + err =can_send (skb,1 ); +if (!err) + op->frames_abs++; -/* update statistics */ op->currframe++; - op->frames_abs++;/* reached last frame? */ if (op->currframe >= op->nframes)
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 17/23 wifi: rt2x00: don't run Rt5592 IQ calibration on MT7620
In reply to Sasha LevinFrom: Daniel Golle <[email protected]>
[ Upstream commit d3aad83d05aec0cfd7670cf0028f2ad4b81de92e ]
The function rt2800_iq_calibrate is intended for Rt5592 only. Don't call it for MT7620 which has it's own calibration functions.
--- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/net/wireless/ralink/rt2x00/rt2800lib.c +2 -1
@@ -3835,7 +3835,8 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev, reg +=2 * rt2x00dev->lna_gain;rt2800_bbp_write_with_rx_chain (rt2x00dev,66 , reg); -rt2800_iq_calibrate (rt2x00dev, rf->channel); +if (rt2x00_rt (rt2x00dev,RT5592 )) +rt2800_iq_calibrate (rt2x00dev, rf->channel); } bbp =rt2800_bbp_read (rt2x00dev,4 );
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 18/23 wifi: rt2x00: set correct TX_SW_CFG1 MAC register for MT7620
In reply to Sasha LevinFrom: Daniel Golle <[email protected]>
[ Upstream commit eeb50acf15762b61921f9df18663f839f387c054 ]
Set correct TX_SW_CFG1 MAC register as it is done also in v3 of the vendor driver[1].
--- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/ralink/rt2x00/rt2800lib.c +1 -1
@@ -5315,7 +5315,7 @@ static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)rt2800_register_write (rt2x00dev,TX_SW_CFG0 ,0x00000404 ); }else if (rt2x00_rt (rt2x00dev,RT6352 )) {rt2800_register_write (rt2x00dev,TX_SW_CFG0 ,0x00000401 ); -rt2800_register_write (rt2x00dev,TX_SW_CFG1 ,0x000C0000 ); +rt2800_register_write (rt2x00dev,TX_SW_CFG1 ,0x000C0001 );rt2800_register_write (rt2x00dev,TX_SW_CFG2 ,0x00000000 );rt2800_register_write (rt2x00dev,MIMO_PS_CFG ,0x00000002 );rt2800_register_write (rt2x00dev,TX_PIN_CFG ,0x00150F0F );
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 19/23 wifi: rt2x00: set SoC wmac clock register
In reply to Sasha LevinFrom: Daniel Golle <[email protected]>
[ Upstream commit cbde6ed406a51092d9e8a2df058f5f8490f27443 ]
Instead of using the default value 33 (pci), set US_CYC_CNT init based on Programming guide:
If available, set chipset bus clock with fallback to cpu clock/3.
--- .../net/wireless/ralink/rt2x00/rt2800lib.c | 21 +++++++++++++++++++ 1 file changed, 21 insertions(+)
drivers/net/wireless/ralink/rt2x00/rt2800lib.c +21 -0
@@ -5567,6 +5567,27 @@ static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev) reg =rt2800_register_read (rt2x00dev,US_CYC_CNT );rt2x00_set_field32 (®,US_CYC_CNT_CLOCK_CYCLE ,125 );rt2800_register_write (rt2x00dev,US_CYC_CNT , reg); + }else if (rt2x00_is_soc (rt2x00dev)) { +struct clk *clk =clk_get_sys ("bus" ,NULL ); +int rate; + +if (IS_ERR (clk)) { + clk =clk_get_sys ("cpu" ,NULL ); + +if (IS_ERR (clk)) { + rate =125 ; + }else { + rate =clk_get_rate (clk) /3000000 ; +clk_put (clk); + } + }else { + rate =clk_get_rate (clk) /1000000 ; +clk_put (clk); + } + + reg =rt2800_register_read (rt2x00dev,US_CYC_CNT ); +rt2x00_set_field32 (®,US_CYC_CNT_CLOCK_CYCLE , rate); +rt2800_register_write (rt2x00dev,US_CYC_CNT , reg); } reg =rt2800_register_read (rt2x00dev,HT_FBK_CFG0 );
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 20/23 wifi: rt2x00: correctly set BBP register 86 for MT7620
In reply to Sasha LevinFrom: Daniel Golle <[email protected]>
[ Upstream commit c9aada64fe6493461127f1522d7e2f01792d2424 ]
Instead of 0 set the correct value for BBP register 86 for MT7620.
--- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/net/wireless/ralink/rt2x00/rt2800lib.c +4 -1
@@ -3655,7 +3655,10 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,rt2800_bbp_write (rt2x00dev,62 ,0x37 - rt2x00dev->lna_gain);rt2800_bbp_write (rt2x00dev,63 ,0x37 - rt2x00dev->lna_gain);rt2800_bbp_write (rt2x00dev,64 ,0x37 - rt2x00dev->lna_gain); -rt2800_bbp_write (rt2x00dev,86 ,0 ); +if (rt2x00_rt (rt2x00dev,RT6352 )) +rt2800_bbp_write (rt2x00dev,86 ,0x38 ); +else +rt2800_bbp_write (rt2x00dev,86 ,0 ); }if (rf->channel <=14 ) {
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 21/23 net: If sock is dead don't access sock's sk_wq in sk_stream_wait_memory
In reply to Sasha LevinFrom: Liu Jian <[email protected]>
[ Upstream commit 3f8ef65af927db247418d4e1db49164d7a158fc5 ]
Fixes the below NULL pointer dereference:
[...]
[ 14.471200] Call Trace: [ 14.471562] <TASK> [ 14.471882] lock_acquire+0x245/0x2e0 [ 14.472416] ? remove_wait_queue+0x12/0x50 [ 14.473014] ? _raw_spin_lock_irqsave+0x17/0x50 [ 14.473681] _raw_spin_lock_irqsave+0x3d/0x50 [ 14.474318] ? remove_wait_queue+0x12/0x50 [ 14.474907] remove_wait_queue+0x12/0x50 [ 14.475480] sk_stream_wait_memory+0x20d/0x340 [ 14.476127] ? do_wait_intr_irq+0x80/0x80 [ 14.476704] do_tcp_sendpages+0x287/0x600 [ 14.477283] tcp_bpf_push+0xab/0x260 [ 14.477817] tcp_bpf_sendmsg_redir+0x297/0x500 [ 14.478461] ? __local_bh_enable_ip+0x77/0xe0 [ 14.479096] tcp_bpf_send_verdict+0x105/0x470 [ 14.479729] tcp_bpf_sendmsg+0x318/0x4f0 [ 14.480311] sock_sendmsg+0x2d/0x40 [ 14.480822] ____sys_sendmsg+0x1b4/0x1c0 [ 14.481390] ? copy_msghdr_from_user+0x62/0x80 [ 14.482048] ___sys_sendmsg+0x78/0xb0 [ 14.482580] ? vmf_insert_pfn_prot+0x91/0x150 [ 14.483215] ? __do_fault+0x2a/0x1a0 [ 14.483738] ? do_fault+0x15e/0x5d0 [ 14.484246] ? __handle_mm_fault+0x56b/0x1040 [ 14.484874] ? lock_is_held_type+0xdf/0x130 [ 14.485474] ? find_held_lock+0x2d/0x90 [ 14.486046] ? __sys_sendmsg+0x41/0x70 [ 14.486587] __sys_sendmsg+0x41/0x70 [ 14.487105] ? intel_pmu_drain_pebs_core+0x350/0x350 [ 14.487822] do_syscall_64+0x34/0x80 [ 14.488345] entry_SYSCALL_64_after_hwframe+0x63/0xcd [...]
The test scenario has the following flow:
thread1 thread2
----------- ---------------
tcp_bpf_sendmsg
tcp_bpf_send_verdict
tcp_bpf_sendmsg_redir sock_close
tcp_bpf_push_locked __sock_release
tcp_bpf_push //inet_release
do_tcp_sendpages sock->ops->release
sk_stream_wait_memory // tcp_close
sk_wait_event sk->sk_prot->close
release_sock(__sk);
***
lock_sock(sk);
__tcp_close
sock_orphan(sk)
sk->sk_wq = NULL
release_sock
****
lock_sock(__sk);
remove_wait_queue(sk_sleep(sk), &wait);
sk_sleep(sk)
//NULL pointer dereference
&rcu_dereference_raw(sk->sk_wq)->waitWhile waiting for memory in thread1, the socket is released with its wait queue because thread2 has closed it. This caused by tcp_bpf_send_verdict didn't increase the f_count of psock->sk_redir->sk_socket->file in thread1.
We should check if SOCK_DEAD flag is set on wakeup in sk_stream_wait_memory before accessing the wait queue.
--- net/core/stream.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
net/core/stream.c +2 -1
@@ -159,7 +159,8 @@ int sk_stream_wait_memory(struct sock *sk, long *timeo_p) *timeo_p = current_timeo; } out: -remove_wait_queue (sk_sleep (sk), &wait); +if (!sock_flag (sk,SOCK_DEAD )) +remove_wait_queue (sk_sleep (sk), &wait);return err; do_error:
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 22/23 Bluetooth: L2CAP: Fix user-after-free
In reply to Sasha LevinFrom: Luiz Augusto von Dentz <[email protected]>
[ Upstream commit 35fcbc4243aad7e7d020b7c1dfb14bb888b20a4f ]
This uses l2cap_chan_hold_unless_zero() after calling __l2cap_get_chan_blah() to prevent the following trace:
Bluetooth: l2cap_core.c:static void l2cap_chan_destroy(struct kref *kref)
Bluetooth: chan 0000000023c4974d
Bluetooth: parent 00000000ae861c08
==================================================================
BUG: KASAN: use-after-free in __mutex_waiter_is_first kernel/locking/mutex.c:191 [inline] BUG: KASAN: use-after-free in __mutex_lock_common kernel/locking/mutex.c:671 [inline] BUG: KASAN: use-after-free in __mutex_lock+0x278/0x400 kernel/locking/mutex.c:729 Read of size 8 at addr ffff888006a49b08 by task kworker/u3:2/389
--- net/bluetooth/l2cap_core.c | 7 +++++++ 1 file changed, 7 insertions(+)
net/bluetooth/l2cap_core.c +7 -0
@@ -4049,6 +4049,12 @@ static int l2cap_connect_create_rsp(struct l2cap_conn *conn, } } + chan =l2cap_chan_hold_unless_zero (chan); +if (!chan) { + err = -EBADSLT ; + goto unlock; + } + err =0 ;l2cap_chan_lock (chan);
@@ -4078,6 +4084,7 @@ static int l2cap_connect_create_rsp(struct l2cap_conn *conn, }l2cap_chan_unlock (chan); +l2cap_chan_put (chan); unlock:mutex_unlock (&conn->chan_lock);
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 23/23 r8152: Rate limit overflow messages
In reply to Sasha LevinFrom: Andrew Gaul <[email protected]>
[ Upstream commit 93e2be344a7db169b7119de21ac1bf253b8c6907 ]
My system shows almost 10 million of these messages over a 24-hour period which pollutes my logs.
--- drivers/net/usb/r8152.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/net/usb/r8152.c +3 -1
@@ -1382,7 +1382,9 @@ static void intr_callback(struct urb *urb) "Stop submitting intr, status %d\n", status);return ;case -EOVERFLOW : -netif_info (tp, intr, tp->netdev,"intr status -EOVERFLOW\n" ); +if (net_ratelimit ()) +netif_info (tp, intr, tp->netdev, +"intr status -EOVERFLOW\n" ); goto resubmit;/* -EPIPE: should clear the halt */ default :
Signature · 1 line
2.35.1