Skip to contentSkip to conversation

Debix Model A board devicetree

PATCH Superseded Daniel Scally 4 participants 12 messages Oct 10, 2022 – Oct 12, 2022

Subsystems (2)

v2 of 6 Superseded Latest is v6 →

lore
Share & tools
lore
#0 lore raw

v2 cover Debix Model A board devicetree

Hello

This series adds a .dts file for the Polyhex Debix Model A board [1] A binding for the vendor is also added.

[1] http://www.polyhex.net/product/embedded-motherboard/board/nxp.html?id=483

Thanks
Dan

Daniel Scally (3):
dt-bindings: vendor-prefixes: Add Polyhex Technology Co.
dt-bindings: arm: fsl: Enumerate Debix Model A Board
arm64: dts: Add device tree for the Debix Model A Board

 .../devicetree/bindings/arm/fsl.yaml          |   1 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../dts/freescale/imx8mp-debix-model-a.dts    | 550 ++++++++++++++++++
 4 files changed, 554 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
Signature · 1 line
2.34.1
#1 lore raw

PATCH v2 1/3 dt-bindings: vendor-prefixes: Add Polyhex Technology Co.

Add an entry for Polyhex Technology Co. to vendor-prefixes.yaml

---
Changes in v2:

- None

 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/vendor-prefixes.yaml +2 -0
index 2f0151e9f6be..7ba1d2c11aa9 100644
@@ -995,6 +995,8 @@ patternProperties:
     description: PocketBook International SA
   "^polaroid,.*":
     description: Polaroid Corporation
+  "^polyhex,.*":
+    description: Polyhex Technology Co. Ltd.
   "^portwell,.*":
     description: Portwell Inc.
   "^poslab,.*":
Signature · 1 line
2.34.1
#2 lore raw

PATCH v2 2/3 dt-bindings: arm: fsl: Enumerate Debix Model A Board

In reply to Daniel Scally

Add an entry to the list of imx8mp boards denoting the Debix Model A board from Polyhex Technology Co.

---
Changes in v2:

- Dropped 2gb suffix, added hyphens for readability (Laurent)

 Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/arm/fsl.yaml +1 -0
index 7431579ab0e8..fc0c8eb15114 100644
@@ -931,6 +931,7 @@ properties:
               - dh,imx8mp-dhcom-pdk2      # i.MX8MP DHCOM SoM on PDK2 board
               - fsl,imx8mp-evk            # i.MX8MP EVK Board
               - gateworks,imx8mp-gw74xx   # i.MX8MP Gateworks Board
+              - polyhex,imx8mp-debix-model-a # Polyhex Debix Model A (2GB) Board
               - toradex,verdin-imx8mp     # Verdin iMX8M Plus Modules
               - toradex,verdin-imx8mp-nonwifi  # Verdin iMX8M Plus Modules without Wi-Fi / BT
               - toradex,verdin-imx8mp-wifi  # Verdin iMX8M Plus Wi-Fi / BT Modules
Signature · 1 line
2.34.1
#3 lore raw

Re: [PATCH v2 2/3] dt-bindings: arm: fsl: Enumerate Debix Model A Board

Quoting Daniel Scally (2022-10-10 14:31:45)

Quoted 19 lines

Add an entry to the list of imx8mp boards denoting the Debix Model A board from Polyhex Technology Co.

---
Changes in v2:

- Dropped 2gb suffix, added hyphens for readability (Laurent)

 Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/arm/fsl.yaml +0 -0
index 7431579ab0e8..fc0c8eb15114 100644

Documentation/devicetree/bindings/arm/fsl.yaml properties: · line 934

Quoted 4 lines
Documentation/devicetree/bindings/arm/fsl.yaml +1 -0
@@ -931,6 +931,7 @@ properties:
               - dh,imx8mp-dhcom-pdk2      # i.MX8MP DHCOM SoM on PDK2 board
               - fsl,imx8mp-evk            # i.MX8MP EVK Board
               - gateworks,imx8mp-gw74xx   # i.MX8MP Gateworks Board
+              - polyhex,imx8mp-debix-model-a # Polyhex Debix Model A (2GB) Board

If we've dropped the 2gb suffix from the compatible string, does that mean we should drop it from the description too? I presume the implication is that we can support different sizes from the same compat string.

Quoted 6 lines
Documentation/devicetree/bindings/arm/fsl.yaml +0 -0
               - toradex,verdin-imx8mp     # Verdin iMX8M Plus Modules
               - toradex,verdin-imx8mp-nonwifi  # Verdin iMX8M Plus Modules without Wi-Fi / BT
               - toradex,verdin-imx8mp-wifi  # Verdin iMX8M Plus Wi-Fi / BT Modules
Signature · 1 line
2.34.1
author
#4 lore raw

Re: [PATCH v2 2/3] dt-bindings: arm: fsl: Enumerate Debix Model A Board

Hi Kieran

Quoted 15 lines · Kieran Bingham

Quoting Daniel Scally (2022-10-10 14:31:45)

Quoted 14 lines

Add an entry to the list of imx8mp boards denoting the Debix Model A board from Polyhex Technology Co.

---
Changes in v2:

- Dropped 2gb suffix, added hyphens for readability (Laurent)

  Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
  1 file changed, 1 insertion(+)
Quoted 13 lines

Documentation/devicetree/bindings/arm/fsl.yaml properties: · line 934

Quoted 9 lines
Documentation/devicetree/bindings/arm/fsl.yaml +1 -0
index 7431579ab0e8..fc0c8eb15114 100644
@@ -931,6 +931,7 @@ properties:
                - dh,imx8mp-dhcom-pdk2      # i.MX8MP DHCOM SoM on PDK2 board
                - fsl,imx8mp-evk            # i.MX8MP EVK Board
                - gateworks,imx8mp-gw74xx   # i.MX8MP Gateworks Board
+              - polyhex,imx8mp-debix-model-a # Polyhex Debix Model A (2GB) Board

If we've dropped the 2gb suffix from the compatible string, does that mean we should drop it from the description too? I presume the implication is that we can support different sizes from the same compat string.

Argh! Yes, my bad - I'll fix that.

Quoted 7 lines
Quoted 7 lines
Documentation/devicetree/bindings/arm/fsl.yaml +0 -0
                - toradex,verdin-imx8mp     # Verdin iMX8M Plus Modules
                - toradex,verdin-imx8mp-nonwifi  # Verdin iMX8M Plus Modules without Wi-Fi / BT
                - toradex,verdin-imx8mp-wifi  # Verdin iMX8M Plus Wi-Fi / BT Modules
Signature · 1 line
2.34.1
Reviewed-by
#5 lore raw

Re: [PATCH v2 2/3] dt-bindings: arm: fsl: Enumerate Debix Model A Board

Quoted 31 lines · Dan Scally
Quoted 15 lines · Kieran Bingham

Quoting Daniel Scally (2022-10-10 14:31:45)

Quoted 14 lines

Add an entry to the list of imx8mp boards denoting the Debix Model A board from Polyhex Technology Co.

---
Changes in v2:

- Dropped 2gb suffix, added hyphens for readability (Laurent)

  Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
  1 file changed, 1 insertion(+)
Quoted 14 lines

Documentation/devicetree/bindings/arm/fsl.yaml properties: · line 934

Quoted 9 lines
Documentation/devicetree/bindings/arm/fsl.yaml +1 -0
index 7431579ab0e8..fc0c8eb15114 100644
@@ -931,6 +931,7 @@ properties:
                - dh,imx8mp-dhcom-pdk2      # i.MX8MP DHCOM SoM on PDK2 board
                - fsl,imx8mp-evk            # i.MX8MP EVK Board
                - gateworks,imx8mp-gw74xx   # i.MX8MP Gateworks Board
+              - polyhex,imx8mp-debix-model-a # Polyhex Debix Model A (2GB) Board

If we've dropped the 2gb suffix from the compatible string, does that mean we should drop it from the description too? I presume the implication is that we can support different sizes from the same compat string.

Quoted 1 line

Argh! Yes, my bad - I'll fix that.

What that change,

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Documentation/devicetree/bindings/arm/fsl.yaml +0 -0
                - toradex,verdin-imx8mp     # Verdin iMX8M Plus Modules
                - toradex,verdin-imx8mp-nonwifi  # Verdin iMX8M Plus Modules without Wi-Fi / BT
                - toradex,verdin-imx8mp-wifi  # Verdin iMX8M Plus Wi-Fi / BT Modules
Signature · 3 lines
Regards,

Laurent Pinchart
#6 lore raw

PATCH v2 3/3 arm64: dts: Add device tree for the Debix Model A Board

In reply to Daniel Scally

Add a device tree file describing the Debix Model A board from Polyhex Technology Co.

---
Changes in v2:

- Fixed the interrupt flag for i2c1/pmic@25
- Fixed the node name for i2c4/rtc@51 (was "hym8563@51")
- Fixed a group control name that didn't match the bindings pattern
- Re-compared the rest of the DT with the EVK's .dts file to try to make sure it complies with the way things should be, hopefully without missing anything...

 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../dts/freescale/imx8mp-debix-model-a.dts    | 550 ++++++++++++++++++
 2 files changed, 551 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
arch/arm64/boot/dts/freescale/Makefile +1 -0
index 8bf7f7ecebaa..6a33a08946ac 100644
@@ -80,6 +80,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-tqma8mqnl-mba8mx.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-venice-gw7902.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-debix-model-a.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb
arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts new file +550 -0

550 lines not on this page · raw message

Signature · 1 line
2.34.1
Reviewed-by on v2 3/3
#7 lore raw

Re: [PATCH v2 3/3] arm64: dts: Add device tree for the Debix Model A Board

Hi Dan,

Thank you for the patch.

Quoted 37 lines · Daniel Scally

Add a device tree file describing the Debix Model A board from Polyhex Technology Co.

---
Changes in v2:

- Fixed the interrupt flag for i2c1/pmic@25
- Fixed the node name for i2c4/rtc@51 (was "hym8563@51")
- Fixed a group control name that didn't match the bindings pattern
- Re-compared the rest of the DT with the EVK's .dts file to try to make sure it complies with the way things should be, hopefully without missing anything...

 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../dts/freescale/imx8mp-debix-model-a.dts    | 550 ++++++++++++++++++
 2 files changed, 551 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
arch/arm64/boot/dts/freescale/Makefile +1 -0
index 8bf7f7ecebaa..6a33a08946ac 100644
@@ -80,6 +80,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-tqma8mqnl-mba8mx.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-venice-gw7902.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-debix-model-a.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb
arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts new file +0 -0
new file mode 100644
index 000000000000..71c0fbfef180

arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts line 3

Quoted 3 lines
arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts new file +3 -0
@@ -0,0 +1,550 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP

Not entirely sure about this one.

arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts line 15

Quoted 12 lines
arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts new file +12 -0
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/usb/pd.h>
+
+#include "imx8mp.dtsi"
+
+/ {
+	model = "Polyhex Debix Model A (2GB) i.MX8MPlus board";

s/(2GB) //

Quoted 80 lines
arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts new file +80 -0
+	compatible = "polyhex,imx8mp-debix-model-a", "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		status-led {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-connection-type = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			reset-gpios = <&gpio4 18 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <20>;
+			reset-deassert-us = <200000>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-connection-type = "rgmii-id";
+	phy-handle = <&ethphy1>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;

arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts line 105

Quoted 10 lines
arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts new file +10 -0
+
+		ethphy1: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			reset-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10>;
+			reset-deassert-us = <150>;
+		};
+	};
+};

Unless I'm mistaken, only one of the two ethernet controllers is used on the base board, the second one requires the I/O extension board. I would remove the one used by the I/O board from this DT file, and add it to the (future) overlay for the I/O board.

Quoted 237 lines
arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts new file +237 -0
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@25 {
+		reg = <0x25>;
+		compatible = "nxp,pca9450c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			buck4: BUCK4{
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5{
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xin32k";
+		interrupt-parent = <&gpio2>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc_int>;
+	};
+};
+
+&i2c6 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c6>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL					0x400001c3
+			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA					0x400001c3
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD						0x40000019
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC						0x40000019
+		>;
+	};
+
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC							0x3
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO						0x3
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0					0x91
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1					0x91
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2					0x91
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3					0x91
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL				0x91
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0					0x1f
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1					0x1f
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2					0x1f
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3					0x1f
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL				0x1f
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f
+			MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN				0x1f
+			MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT				0x1f
+			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18							0x19
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC							0x3
+			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO							0x3
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0						0x91
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1						0x91
+			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2						0x91
+			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3						0x91
+			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC						0x91
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL					0x91
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0						0x1f
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1						0x1f
+			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2						0x1f
+			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3						0x1f
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL					0x1f
+			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC						0x1f
+			MX8MP_IOMUXC_SAI1_RXD1__ENET1_1588_EVENT1_OUT				0x1f
+			MX8MP_IOMUXC_SAI1_RXD0__ENET1_1588_EVENT1_IN				0x1f
+			MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19							0x19
+		>;
+	};
+
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16						0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL								0x400001c2
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA								0x400001c2
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL								0x400001c2
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA								0x400001c2
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL								0x400001c2
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA								0x400001c2
+		>;
+	};
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL								0x400001c3
+			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA								0x400001c3
+		>;

arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts line 352

Quoted 10 lines
arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts new file +10 -0
+	};
+
+	pinctrl_i2c6: i2c6grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXFS__I2C6_SCL							0x400001c3
+			MX8MP_IOMUXC_SAI5_RXC__I2C6_SDA								0x400001c3
+		>;
+	};
+
+	pinctrl_rtc_int: rtcintgrp {

This should go a bit below in alphabetical order.

Quoted 198 lines
arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts new file +198 -0
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11							0x140
+		>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03							0x41
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19						0x41
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX						0x14f
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX						0x14f
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX						0x49
+			MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX						0x49
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX						0x49
+			MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX						0x49
+		>;
+	};
+
+	pinctrl_usb1_vbus: usb1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25							0x19
+			MX8MP_IOMUXC_SAI2_TXD0__GPIO4_IO26							0x19
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK							0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD							0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0						0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1						0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2						0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3						0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT						0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK							0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD							0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0						0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1						0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2						0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3						0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT						0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK							0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD							0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0						0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1						0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2						0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3						0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT						0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12							0x1c4
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK							0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD							0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0						0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1						0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2						0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3						0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4						0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5						0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6						0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7							0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE						0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK							0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD							0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0						0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1						0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2						0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3						0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4						0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5						0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6						0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7							0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE						0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK							0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD							0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0						0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1						0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2						0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3						0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4						0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5						0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6						0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7							0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE						0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B						0xc6
+		>;
+	};
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart2 {
+	/* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+/* SD Card */
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+/* eMMc */
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
Signature · 3 lines
Regards,

Laurent Pinchart
#8 lore raw
In reply to Daniel Scally

Hello Daniel,

Quoted 2 lines · Daniel Scally

This series adds a .dts file for the Polyhex Debix Model A board [1] A binding for the vendor is also added.

A bit off-topic, how cooperative is Polyhex when it comes to the datasheets of the board and the expansion boards?

regards,
Marc

Signature · 4 lines
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |
#9 lore raw
Quoted 8 lines · Marc Kleine-Budde

Hello Daniel,

Quoted 2 lines · Daniel Scally

This series adds a .dts file for the Polyhex Debix Model A board [1] A binding for the vendor is also added.

A bit off-topic, how cooperative is Polyhex when it comes to the datasheets of the board and the expansion boards?

There is public documentation, including reduced schematics that provide just the pinout of the connectors. When it comes to availability of non-public documentation to selected upstream developers, I'll let Polyhex answer that question. More detailed schematics would certainly be useful to develop and review the upstream device tree integration for the board.

Signature · 3 lines
Regards,

Laurent Pinchart
#10 lore raw
Quoted 6 lines · Laurent Pinchart
Quoted 5 lines
Quoted 2 lines

This series adds a .dts file for the Polyhex Debix Model A board [1] A binding for the vendor is also added.

A bit off-topic, how cooperative is Polyhex when it comes to the datasheets of the board and the expansion boards?

Quoted 6 lines

There is public documentation, including reduced schematics that provide just the pinout of the connectors. When it comes to availability of non-public documentation to selected upstream developers, I'll let Polyhex answer that question. More detailed schematics would certainly be useful to develop and review the upstream device tree integration for the board.

Thanks, I've found the "reduced" schematics. Do you have a direct contact to ask for more detailed schematics (e.g. for the IO board)?

regards,
Marc

Signature · 4 lines
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |
#11 lore raw

Quoting Marc Kleine-Budde (2022-10-11 07:43:16)

Quoted 14 lines · Laurent Pinchart
Quoted 6 lines
Quoted 5 lines
Quoted 2 lines

This series adds a .dts file for the Polyhex Debix Model A board [1] A binding for the vendor is also added.

A bit off-topic, how cooperative is Polyhex when it comes to the datasheets of the board and the expansion boards?

Quoted 6 lines

There is public documentation, including reduced schematics that provide just the pinout of the connectors. When it comes to availability of non-public documentation to selected upstream developers, I'll let Polyhex answer that question. More detailed schematics would certainly be useful to develop and review the upstream device tree integration for the board.

Quoted 2 lines

Thanks, I've found the "reduced" schematics. Do you have a direct contact to ask for more detailed schematics (e.g. for the IO board)?

There's a discord channel/server at https://discord.gg/adaHHaDkH2
and [email protected], already on Cc of this mail thread.

--
Kieran

Quoted 9 lines

regards,
Marc

Signature · 4 lines
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |