Debix Model A board devicetree
Subsystems (2)
v6 cover Debix Model A board devicetree
Hello
This series adds a .dts file for the Polyhex Debix Model A board [1] A binding for the vendor is also added.
[1] http://www.polyhex.net/product/embedded-motherboard/board/nxp.html?id=483
Thanks
Dan
Daniel Scally (3):
dt-bindings: vendor-prefixes: Add Polyhex Technology Co.
dt-bindings: arm: fsl: Enumerate Debix Model A Board
arm64: dts: Add device tree for the Debix Model A Board
.../devicetree/bindings/arm/fsl.yaml | 2 + .../devicetree/bindings/vendor-prefixes.yaml | 2 + arch/arm64/boot/dts/freescale/Makefile | 1 + .../dts/freescale/imx8mp-debix-model-a.dts | 506 ++++++++++++++++++ 4 files changed, 511 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
Signature · 7 lines
2.34.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH v6 1/3 dt-bindings: vendor-prefixes: Add Polyhex Technology Co.
Add an entry for Polyhex Technology Co. to vendor-prefixes.yaml
---
Changes since v1:
- None
Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/vendor-prefixes.yaml +2 -0
@@ -1013,6 +1013,8 @@ patternProperties: description: PocketBook International SA "^polaroid,.*": description: Polaroid Corporation + "^polyhex,.*": + description: Polyhex Technology Co. Ltd. "^portwell,.*": description: Portwell Inc. "^poslab,.*":
Signature · 7 lines
2.34.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH v6 2/3 dt-bindings: arm: fsl: Enumerate Debix Model A Board
In reply to Daniel ScallyAdd entries to the list of imx8mp boards denoting the Debix Model A board from Polyhex Technology Co, along with a more generic entry that can be used where both the Model A and Model B are supported.
---
Changes in v6:
- None
Changes in v5:
- Added the polyhex,imx8mp-debix entry (Ahmad)
changes in v4:
- None
Changes in v3:
- Dropped (2GB) from the comment too (Kieran)
Changes in v2:
- Dropped 2gb suffix, added hyphens for readability (Laurent)
Documentation/devicetree/bindings/arm/fsl.yaml | 2 ++ 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/arm/fsl.yaml +2 -0
@@ -935,6 +935,8 @@ properties: - dh,imx8mp-dhcom-pdk2 # i.MX8MP DHCOM SoM on PDK2 board - fsl,imx8mp-evk # i.MX8MP EVK Board - gateworks,imx8mp-gw74xx # i.MX8MP Gateworks Board + - polyhex,imx8mp-debix # Polyhex Debix boards + - polyhex,imx8mp-debix-model-a # Polyhex Debix Model A Board - toradex,verdin-imx8mp # Verdin iMX8M Plus Modules - toradex,verdin-imx8mp-nonwifi # Verdin iMX8M Plus Modules without Wi-Fi / BT - toradex,verdin-imx8mp-wifi # Verdin iMX8M Plus Wi-Fi / BT Modules
Signature · 7 lines
2.34.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH v6 3/3 arm64: dts: Add device tree for the Debix Model A Board
In reply to Daniel ScallyAdd a device tree file describing the Debix Model A board from Polyhex Technology Co.
---
Changes in v6:
- Re-ordered the iomuxc to be at the end of the file (Marco)
- Removed some orphaned attributes (where one of a pair was left after the other had been removed) (Marco, Fabio)
Changes in v5:
- Fixed some formatting (blank lines, compatible property order) (Shawn)
- Renamed the led nodes (Shawn)
- Added the less specific compatible string (Ahmad)
- Added a comment describing the eth phy (Ahmad)
- Removed some elements that turn out to be unused (Ahmad)
Changes in v4 (Laurent):
- Aligned the pinctrl group values with each other
Changes in v3 (Laurent):
- Added IOB copyright notice
- Removed the eth node for the connector that's on the separate I/O board
- Re-ordered some pinctrl groups so they're alphabetical
Changes in v2:
- Fixed the interrupt flag for i2c1/pmic@25
- Fixed the node name for i2c4/rtc@51 (was "hym8563@51")
- Fixed a group control name that didn't match the bindings pattern
- Re-compared the rest of the DT with the EVK's .dts file to try to make sure it complies with the way things should be, hopefully without missing anything...
arch/arm64/boot/dts/freescale/Makefile | 1 + .../dts/freescale/imx8mp-debix-model-a.dts | 506 ++++++++++++++++++ 2 files changed, 507 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
arch/arm64/boot/dts/freescale/Makefile +1 -0
@@ -86,6 +86,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-tqma8mqnl-mba8mx.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-venice-gw7902.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-debix-model-a.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb
arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts new file +506 -0
506 lines not on this page · raw message
Signature · 7 lines
2.34.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Hi Daniel,
Quoted 7 lines · Daniel Scally
Hello
This series adds a .dts file for the Polyhex Debix Model A board [1] A binding for the vendor is also added.
[1] http://www.polyhex.net/product/embedded-motherboard/board/nxp.html?id=483
Quoted 7 lines
Thanks
DanDaniel Scally (3):
dt-bindings: vendor-prefixes: Add Polyhex Technology Co.
dt-bindings: arm: fsl: Enumerate Debix Model A Board
arm64: dts: Add device tree for the Debix Model A Board
Whole series lgtm, feel free to add my
Quoted 12 lines
.../devicetree/bindings/arm/fsl.yaml | 2 + .../devicetree/bindings/vendor-prefixes.yaml | 2 + arch/arm64/boot/dts/freescale/Makefile | 1 + .../dts/freescale/imx8mp-debix-model-a.dts | 506 ++++++++++++++++++ 4 files changed, 511 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dtsSignature · 1 line
2.34.1
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Morning Marco
Quoted 13 lines · Marco Felsch
Hi Daniel,
Quoted 10 lines · Daniel Scally
Hello
This series adds a .dts file for the Polyhex Debix Model A board [1] A binding for the vendor is also added.
[1] http://www.polyhex.net/product/embedded-motherboard/board/nxp.html?id=483
Thanks
Dan
Quoted 7 lines
Quoted 4 lines
Daniel Scally (3):
dt-bindings: vendor-prefixes: Add Polyhex Technology Co.
dt-bindings: arm: fsl: Enumerate Debix Model A Board
arm64: dts: Add device tree for the Debix Model A BoardWhole series lgtm, feel free to add my
Reviewed-by Marco Felsch <[email protected]>
Thanks very much :)
Quoted 8 lines
Quoted 8 lines
.../devicetree/bindings/arm/fsl.yaml | 2 + .../devicetree/bindings/vendor-prefixes.yaml | 2 + arch/arm64/boot/dts/freescale/Makefile | 1 + .../dts/freescale/imx8mp-debix-model-a.dts | 506 ++++++++++++++++++ 4 files changed, 511 insertions(+)create mode 100644
arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
Quoted 4 lines
Quoted 4 lines
Signature · 1 line
2.34.1
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Shawn Guo
AppliedQuoted 7 lines · Daniel Scally
Hello
This series adds a .dts file for the Polyhex Debix Model A board [1] A binding for the vendor is also added.
[1] http://www.polyhex.net/product/embedded-motherboard/board/nxp.html?id=483
Quoted 7 lines
Thanks
DanDaniel Scally (3):
dt-bindings: vendor-prefixes: Add Polyhex Technology Co.
dt-bindings: arm: fsl: Enumerate Debix Model A Board
arm64: dts: Add device tree for the Debix Model A Board
Applied all, thanks!
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel