Skip to contentSkip to conversation

Debix Model A board devicetree

PATCH Applied Daniel Scally 3 participants 7 messages Dec 13, 2022 – Dec 31, 2022

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

v6 cover Debix Model A board devicetree

Hello

This series adds a .dts file for the Polyhex Debix Model A board [1] A binding for the vendor is also added.

[1] http://www.polyhex.net/product/embedded-motherboard/board/nxp.html?id=483

Thanks
Dan

Daniel Scally (3):
dt-bindings: vendor-prefixes: Add Polyhex Technology Co.
dt-bindings: arm: fsl: Enumerate Debix Model A Board
arm64: dts: Add device tree for the Debix Model A Board

 .../devicetree/bindings/arm/fsl.yaml          |   2 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../dts/freescale/imx8mp-debix-model-a.dts    | 506 ++++++++++++++++++
 4 files changed, 511 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
Signature · 7 lines
2.34.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
#1 lore raw

PATCH v6 1/3 dt-bindings: vendor-prefixes: Add Polyhex Technology Co.

Add an entry for Polyhex Technology Co. to vendor-prefixes.yaml

---

Changes since v1:

- None

 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/vendor-prefixes.yaml +2 -0
index cbe12da61b06..4ce51befb73d 100644
@@ -1013,6 +1013,8 @@ patternProperties:
     description: PocketBook International SA
   "^polaroid,.*":
     description: Polaroid Corporation
+  "^polyhex,.*":
+    description: Polyhex Technology Co. Ltd.
   "^portwell,.*":
     description: Portwell Inc.
   "^poslab,.*":
Signature · 7 lines
2.34.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
#2 lore raw

PATCH v6 2/3 dt-bindings: arm: fsl: Enumerate Debix Model A Board

In reply to Daniel Scally

Add entries to the list of imx8mp boards denoting the Debix Model A board from Polyhex Technology Co, along with a more generic entry that can be used where both the Model A and Model B are supported.

---

Changes in v6:

- None

Changes in v5:

- Added the polyhex,imx8mp-debix entry (Ahmad)

changes in v4:

- None

Changes in v3:

- Dropped (2GB) from the comment too (Kieran)

Changes in v2:

- Dropped 2gb suffix, added hyphens for readability (Laurent)

 Documentation/devicetree/bindings/arm/fsl.yaml | 2 ++
 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/arm/fsl.yaml +2 -0
index 0a5c4e29067a..40fb4b603c37 100644
@@ -935,6 +935,8 @@ properties:
               - dh,imx8mp-dhcom-pdk2      # i.MX8MP DHCOM SoM on PDK2 board
               - fsl,imx8mp-evk            # i.MX8MP EVK Board
               - gateworks,imx8mp-gw74xx   # i.MX8MP Gateworks Board
+              - polyhex,imx8mp-debix      # Polyhex Debix boards
+              - polyhex,imx8mp-debix-model-a # Polyhex Debix Model A Board
               - toradex,verdin-imx8mp     # Verdin iMX8M Plus Modules
               - toradex,verdin-imx8mp-nonwifi  # Verdin iMX8M Plus Modules without Wi-Fi / BT
               - toradex,verdin-imx8mp-wifi  # Verdin iMX8M Plus Wi-Fi / BT Modules
Signature · 7 lines
2.34.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
#3 lore raw

PATCH v6 3/3 arm64: dts: Add device tree for the Debix Model A Board

In reply to Daniel Scally

Add a device tree file describing the Debix Model A board from Polyhex Technology Co.

---
Changes in v6:

- Re-ordered the iomuxc to be at the end of the file (Marco)
- Removed some orphaned attributes (where one of a pair was left after the other had been removed) (Marco, Fabio)

Changes in v5:

- Fixed some formatting (blank lines, compatible property order) (Shawn)
- Renamed the led nodes (Shawn)
- Added the less specific compatible string (Ahmad)
- Added a comment describing the eth phy (Ahmad)
- Removed some elements that turn out to be unused (Ahmad)

Changes in v4 (Laurent):

- Aligned the pinctrl group values with each other

Changes in v3 (Laurent):

- Added IOB copyright notice
- Removed the eth node for the connector that's on the separate I/O board
- Re-ordered some pinctrl groups so they're alphabetical

Changes in v2:

- Fixed the interrupt flag for i2c1/pmic@25
- Fixed the node name for i2c4/rtc@51 (was "hym8563@51")
- Fixed a group control name that didn't match the bindings pattern
- Re-compared the rest of the DT with the EVK's .dts file to try to make sure it complies with the way things should be, hopefully without missing anything...

 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../dts/freescale/imx8mp-debix-model-a.dts    | 506 ++++++++++++++++++
 2 files changed, 507 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
arch/arm64/boot/dts/freescale/Makefile +1 -0
index ef6f364eaa18..e0f6a7970f58 100644
@@ -86,6 +86,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-tqma8mqnl-mba8mx.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-venice-gw7902.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-debix-model-a.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb
arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts new file +506 -0

506 lines not on this page · raw message

Signature · 7 lines
2.34.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Reviewed-by on the v6 series
#4 lore raw
In reply to Daniel Scally

Hi Daniel,

Quoted 7 lines · Daniel Scally

Hello

This series adds a .dts file for the Polyhex Debix Model A board [1] A binding for the vendor is also added.

[1] http://www.polyhex.net/product/embedded-motherboard/board/nxp.html?id=483

Quoted 7 lines

Thanks
Dan

Daniel Scally (3):
dt-bindings: vendor-prefixes: Add Polyhex Technology Co.
dt-bindings: arm: fsl: Enumerate Debix Model A Board
arm64: dts: Add device tree for the Debix Model A Board

Whole series lgtm, feel free to add my

Quoted 12 lines
 .../devicetree/bindings/arm/fsl.yaml          |   2 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../dts/freescale/imx8mp-debix-model-a.dts    | 506 ++++++++++++++++++
 4 files changed, 511 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
Signature · 1 line
2.34.1

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

author
#5 lore raw

Morning Marco

Quoted 13 lines · Marco Felsch

Hi Daniel,

Quoted 10 lines · Daniel Scally

Hello

This series adds a .dts file for the Polyhex Debix Model A board [1] A binding for the vendor is also added.

[1] http://www.polyhex.net/product/embedded-motherboard/board/nxp.html?id=483

Thanks
Dan

Quoted 7 lines
Quoted 4 lines

Daniel Scally (3):
dt-bindings: vendor-prefixes: Add Polyhex Technology Co.
dt-bindings: arm: fsl: Enumerate Debix Model A Board
arm64: dts: Add device tree for the Debix Model A Board

Whole series lgtm, feel free to add my

Thanks very much :)

Quoted 8 lines
Quoted 8 lines
  .../devicetree/bindings/arm/fsl.yaml          |   2 +
  .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
  arch/arm64/boot/dts/freescale/Makefile        |   1 +
  .../dts/freescale/imx8mp-debix-model-a.dts    | 506 ++++++++++++++++++
  4 files changed, 511 insertions(+)

create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts

Quoted 4 lines
Quoted 4 lines
Signature · 1 line
2.34.1

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Applied
#6 lore raw
In reply to Daniel Scally
Quoted 7 lines · Daniel Scally

Hello

This series adds a .dts file for the Polyhex Debix Model A board [1] A binding for the vendor is also added.

[1] http://www.polyhex.net/product/embedded-motherboard/board/nxp.html?id=483

Quoted 7 lines

Thanks
Dan

Daniel Scally (3):
dt-bindings: vendor-prefixes: Add Polyhex Technology Co.
dt-bindings: arm: fsl: Enumerate Debix Model A Board
arm64: dts: Add device tree for the Debix Model A Board

Applied all, thanks!

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel