Skip to contentSkip to conversation

rerandomize RNG seeds on reboot and handle record&replay

PATCH Superseded Jason A. Donenfeld 4 participants 14 messages Oct 11, 2022 – Oct 17, 2022

Subsystems (3)

v2 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

v2 cover rerandomize RNG seeds on reboot and handle record&replay

When the system reboots, the rng seed that QEMU passes should be re-randomized, so that the new boot gets a new seed. This series wires that up for FDT.

Then, since the record&replay subsystem makes use of reset as well, we add a new reset cause for record&replay, so that we can avoid re-randomizing in these cases.

Jason A. Donenfeld (8):
device-tree: add re-randomization helper function
arm: re-randomize rng-seed on reboot
riscv: re-randomize rng-seed on reboot
openrisc: re-randomize rng-seed on reboot
rx: re-randomize rng-seed on reboot
mips: re-randomize rng-seed on reboot
reset: allow registering handlers that aren't called by snapshot
loading
reset: do not re-randomize RNG seed on snapshot load

 hw/arm/aspeed.c              |  4 ++--
 hw/arm/boot.c                |  2 ++
 hw/arm/mps2-tz.c             |  4 ++--
 hw/core/reset.c              | 15 ++++++++++++++-
 hw/hppa/machine.c            |  4 ++--
 hw/i386/microvm.c            |  4 ++--
 hw/i386/pc.c                 |  6 +++---
 hw/i386/x86.c                |  2 +-
 hw/mips/boston.c             |  3 +++
 hw/openrisc/boot.c           |  3 +++
 hw/ppc/pegasos2.c            |  4 ++--
 hw/ppc/pnv.c                 |  4 ++--
 hw/ppc/spapr.c               |  4 ++--
 hw/riscv/boot.c              |  3 +++
 hw/rx/rx-gdbsim.c            |  3 +++
 hw/s390x/s390-virtio-ccw.c   |  4 ++--
 include/hw/boards.h          |  2 +-
 include/sysemu/device_tree.h |  9 +++++++++
 include/sysemu/reset.h       |  5 ++++-
 migration/savevm.c           |  2 +-
 qapi/run-state.json          |  4 +++-
 softmmu/device_tree.c        | 21 +++++++++++++++++++++
 softmmu/runstate.c           |  4 ++--
 23 files changed, 89 insertions(+), 27 deletions(-)
Signature · 1 line
2.37.3
#1 lore raw

PATCH v2 1/8 device-tree: add re-randomization helper function

When the system reboots, the rng-seed that the FDT has should be re-randomized, so that the new boot gets a new seed. Several architectures require this functionality, so export a function for injecting a new seed into the given FDT.

Cc Alistair Francis <[email protected]>
Cc David Gibson <[email protected]>
---
 include/sysemu/device_tree.h |  9 +++++++++
 softmmu/device_tree.c        | 21 +++++++++++++++++++++
 2 files changed, 30 insertions(+)
include/sysemu/device_tree.h +9 -0
index ef060a9759..d552f324b6 100644
@@ -196,6 +196,15 @@ int qemu_fdt_setprop_sized_cells_from_array(void *fdt,
                                                 qdt_tmp);                 \
     })
 
+
+/**
+ * qemu_fdt_randomize_seeds:
+ * @fdt: device tree blob
+ *
+ * Re-randomize all "rng-seed" properties with new seeds.
+ */
+void qemu_fdt_randomize_seeds(void *fdt);
+
 #define FDT_PCI_RANGE_RELOCATABLE          0x80000000
 #define FDT_PCI_RANGE_PREFETCHABLE         0x40000000
 #define FDT_PCI_RANGE_ALIASED              0x20000000
softmmu/device_tree.c +21 -0
index 6ca3fad285..d986c7b7b3 100644
@@ -22,6 +22,7 @@
 #include "qemu/option.h"
 #include "qemu/bswap.h"
 #include "qemu/cutils.h"
+#include "qemu/guest-random.h"
 #include "sysemu/device_tree.h"
 #include "hw/loader.h"
 #include "hw/boards.h"
@@ -643,3 +644,23 @@ out:
     g_free(propcells);
     return ret;
 }
+
+void qemu_fdt_randomize_seeds(void *fdt)
+{
+    int noffset, poffset, len;
+    const char *name;
+    uint8_t *data;
+
+    for (noffset = fdt_next_node(fdt, 0, NULL);
+         noffset >= 0;
+         noffset = fdt_next_node(fdt, noffset, NULL)) {
+        for (poffset = fdt_first_property_offset(fdt, noffset);
+             poffset >= 0;
+             poffset = fdt_next_property_offset(fdt, poffset)) {
+            data = (uint8_t *)fdt_getprop_by_offset(fdt, poffset, &name, &len);
+            if (!data || strcmp(name, "rng-seed"))
+                continue;
+            qemu_guest_getrandom_nofail(data, len);
+        }
+    }
+}
Signature · 1 line
2.37.3
Reviewed-by on v2 1/8
#2 lore raw

Re: [PATCH v2 1/8] device-tree: add re-randomization helper function

Quoted 9 lines · Jason A. Donenfeld

When the system reboots, the rng-seed that the FDT has should be re-randomized, so that the new boot gets a new seed. Several architectures require this functionality, so export a function for injecting a new seed into the given FDT.

Cc Alistair Francis <[email protected]>
Cc David Gibson <[email protected]>

Alistair

Quoted 65 lines
---
 include/sysemu/device_tree.h |  9 +++++++++
 softmmu/device_tree.c        | 21 +++++++++++++++++++++
 2 files changed, 30 insertions(+)
include/sysemu/device_tree.h +9 -0
index ef060a9759..d552f324b6 100644
@@ -196,6 +196,15 @@ int qemu_fdt_setprop_sized_cells_from_array(void *fdt,
                                                 qdt_tmp);                 \
     })
 
+
+/**
+ * qemu_fdt_randomize_seeds:
+ * @fdt: device tree blob
+ *
+ * Re-randomize all "rng-seed" properties with new seeds.
+ */
+void qemu_fdt_randomize_seeds(void *fdt);
+
 #define FDT_PCI_RANGE_RELOCATABLE          0x80000000
 #define FDT_PCI_RANGE_PREFETCHABLE         0x40000000
 #define FDT_PCI_RANGE_ALIASED              0x20000000
softmmu/device_tree.c +21 -1
index 6ca3fad285..d986c7b7b3 100644
@@ -22,6 +22,7 @@
 #include "qemu/option.h"
 #include "qemu/bswap.h"
 #include "qemu/cutils.h"
+#include "qemu/guest-random.h"
 #include "sysemu/device_tree.h"
 #include "hw/loader.h"
 #include "hw/boards.h"
@@ -643,3 +644,23 @@ out:
     g_free(propcells);
     return ret;
 }
+
+void qemu_fdt_randomize_seeds(void *fdt)
+{
+    int noffset, poffset, len;
+    const char *name;
+    uint8_t *data;
+
+    for (noffset = fdt_next_node(fdt, 0, NULL);
+         noffset >= 0;
+         noffset = fdt_next_node(fdt, noffset, NULL)) {
+        for (poffset = fdt_first_property_offset(fdt, noffset);
+             poffset >= 0;
+             poffset = fdt_next_property_offset(fdt, poffset)) {
+            data = (uint8_t *)fdt_getprop_by_offset(fdt, poffset, &name, &len);
+            if (!data || strcmp(name, "rng-seed"))
+                continue;
+            qemu_guest_getrandom_nofail(data, len);
+        }
+    }
+}
--

2.37.3

#3 lore raw

PATCH v2 2/8 arm: re-randomize rng-seed on reboot

In reply to Jason A. Donenfeld

When the system reboots, the rng-seed that the FDT has should be re-randomized, so that the new boot gets a new seed. Since the FDT is in the ROM region at this point, we add a hook right after the ROM has been added, so that we have a pointer to that copy of the FDT.

---
 hw/arm/boot.c | 1 +
 1 file changed, 1 insertion(+)
hw/arm/boot.c +1 -0
index ada2717f76..6a6f4c92c2 100644
@@ -683,6 +683,7 @@ int arm_load_dtb(hwaddr addr, const struct arm_boot_info *binfo,
      * the DTB is copied again upon reset, even if addr points into RAM.
      */
     rom_add_blob_fixed_as("dtb", fdt, size, addr, as);
+    qemu_register_reset(qemu_fdt_randomize_seeds, rom_ptr_for_as(as, addr, size));
 
     g_free(fdt);
 
Signature · 1 line
2.37.3
#4 lore raw

PATCH v2 3/8 riscv: re-randomize rng-seed on reboot

In reply to Jason A. Donenfeld

When the system reboots, the rng-seed that the FDT has should be re-randomized, so that the new boot gets a new seed. Since the FDT is in the ROM region at this point, we add a hook right after the ROM has been added, so that we have a pointer to that copy of the FDT.

---
 hw/riscv/boot.c | 3 +++
 1 file changed, 3 insertions(+)
hw/riscv/boot.c +3 -0
index 1ae7596873..aaecf21543 100644
@@ -30,6 +30,7 @@
 #include "sysemu/device_tree.h"
 #include "sysemu/qtest.h"
 #include "sysemu/kvm.h"
+#include "sysemu/reset.h"
 
 #include <libfdt.h>
 
@@ -241,6 +242,8 @@ uint64_t riscv_load_fdt(hwaddr dram_base, uint64_t mem_size, void *fdt)
 
     rom_add_blob_fixed_as("fdt", fdt, fdtsize, fdt_addr,
                           &address_space_memory);
+    qemu_register_reset(qemu_fdt_randomize_seeds,
+                        rom_ptr_for_as(&address_space_memory, fdt_addr, fdtsize));
 
     return fdt_addr;
 }
Signature · 1 line
2.37.3
Reviewed-by on v2 3/8
#5 lore raw

Re: [PATCH v2 3/8] riscv: re-randomize rng-seed on reboot

Quoted 11 lines · Jason A. Donenfeld

When the system reboots, the rng-seed that the FDT has should be re-randomized, so that the new boot gets a new seed. Since the FDT is in the ROM region at this point, we add a hook right after the ROM has been added, so that we have a pointer to that copy of the FDT.

Alistair

Quoted 29 lines
---
 hw/riscv/boot.c | 3 +++
 1 file changed, 3 insertions(+)
hw/riscv/boot.c +3 -1
index 1ae7596873..aaecf21543 100644
@@ -30,6 +30,7 @@
 #include "sysemu/device_tree.h"
 #include "sysemu/qtest.h"
 #include "sysemu/kvm.h"
+#include "sysemu/reset.h"
 
 #include <libfdt.h>
 
@@ -241,6 +242,8 @@ uint64_t riscv_load_fdt(hwaddr dram_base, uint64_t mem_size, void *fdt)
 
     rom_add_blob_fixed_as("fdt", fdt, fdtsize, fdt_addr,
                           &address_space_memory);
+    qemu_register_reset(qemu_fdt_randomize_seeds,
+                        rom_ptr_for_as(&address_space_memory, fdt_addr, fdtsize));
 
     return fdt_addr;
 }
--

2.37.3

#6 lore raw

PATCH v2 4/8 openrisc: re-randomize rng-seed on reboot

In reply to Jason A. Donenfeld

When the system reboots, the rng-seed that the FDT has should be re-randomized, so that the new boot gets a new seed. Since the FDT is in the ROM region at this point, we add a hook right after the ROM has been added, so that we have a pointer to that copy of the FDT.

---
 hw/openrisc/boot.c | 3 +++
 1 file changed, 3 insertions(+)
hw/openrisc/boot.c +3 -0
index 128ccbcba2..8b9f11b6d8 100644
@@ -14,6 +14,7 @@
 #include "hw/openrisc/boot.h"
 #include "sysemu/device_tree.h"
 #include "sysemu/qtest.h"
+#include "sysemu/reset.h"
 
 #include <libfdt.h>
 
@@ -111,6 +112,8 @@ uint32_t openrisc_load_fdt(void *fdt, hwaddr load_start,
 
     rom_add_blob_fixed_as("fdt", fdt, fdtsize, fdt_addr,
                           &address_space_memory);
+    qemu_register_reset(qemu_fdt_randomize_seeds,
+                        rom_ptr_for_as(&address_space_memory, fdt_addr, fdtsize));
 
     return fdt_addr;
 }
Signature · 1 line
2.37.3
#7 lore raw

PATCH v2 5/8 rx: re-randomize rng-seed on reboot

In reply to Jason A. Donenfeld

When the system reboots, the rng-seed that the FDT has should be re-randomized, so that the new boot gets a new seed. Since the FDT is in the ROM region at this point, we add a hook right after the ROM has been added, so that we have a pointer to that copy of the FDT.

---
 hw/rx/rx-gdbsim.c | 3 +++
 1 file changed, 3 insertions(+)
hw/rx/rx-gdbsim.c +3 -0
index 8ffe1b8035..198d048964 100644
@@ -25,6 +25,7 @@
 #include "hw/rx/rx62n.h"
 #include "sysemu/qtest.h"
 #include "sysemu/device_tree.h"
+#include "sysemu/reset.h"
 #include "hw/boards.h"
 #include "qom/object.h"
 
@@ -148,6 +149,8 @@ static void rx_gdbsim_init(MachineState *machine)
             dtb_offset = ROUND_DOWN(machine->ram_size - dtb_size, 16);
             rom_add_blob_fixed("dtb", dtb, dtb_size,
                                SDRAM_BASE + dtb_offset);
+            qemu_register_reset(qemu_fdt_randomize_seeds,
+                                rom_ptr(SDRAM_BASE + dtb_offset, dtb_size));
             /* Set dtb address to R1 */
             RX_CPU(first_cpu)->env.regs[1] = SDRAM_BASE + dtb_offset;
         }
Signature · 1 line
2.37.3
Reviewed-by on v2 5/8
#8 lore raw

Re: [PATCH v2 5/8] rx: re-randomize rng-seed on reboot

Quoted 36 lines · Jason A. Donenfeld

When the system reboots, the rng-seed that the FDT has should be re-randomized, so that the new boot gets a new seed. Since the FDT is in the ROM region at this point, we add a hook right after the ROM has been added, so that we have a pointer to that copy of the FDT.

---
 hw/rx/rx-gdbsim.c | 3 +++
 1 file changed, 3 insertions(+)
hw/rx/rx-gdbsim.c +3 -0
index 8ffe1b8035..198d048964 100644
@@ -25,6 +25,7 @@
 #include "hw/rx/rx62n.h"
 #include "sysemu/qtest.h"
 #include "sysemu/device_tree.h"
+#include "sysemu/reset.h"
 #include "hw/boards.h"
 #include "qom/object.h"
 
@@ -148,6 +149,8 @@ static void rx_gdbsim_init(MachineState *machine)
             dtb_offset = ROUND_DOWN(machine->ram_size - dtb_size, 16);
             rom_add_blob_fixed("dtb", dtb, dtb_size,
                                SDRAM_BASE + dtb_offset);
+            qemu_register_reset(qemu_fdt_randomize_seeds,
+                                rom_ptr(SDRAM_BASE + dtb_offset, dtb_size));
             /* Set dtb address to R1 */
             RX_CPU(first_cpu)->env.regs[1] = SDRAM_BASE + dtb_offset;
         }
Signature · 1 line
2.37.3
Signature · 1 line
Yosinori Sato
#9 lore raw

PATCH v2 6/8 mips: re-randomize rng-seed on reboot

In reply to Jason A. Donenfeld

When the system reboots, the rng-seed that the FDT has should be re-randomized, so that the new boot gets a new seed. Since the FDT is in the ROM region at this point, we add a hook right after the ROM has been added, so that we have a pointer to that copy of the FDT.

Cc Aleksandar Rikalo <[email protected]>
Cc Paul Burton <[email protected]>
Cc Philippe Mathieu-Daudé <[email protected]>
---
 hw/mips/boston.c | 3 +++
 1 file changed, 3 insertions(+)
hw/mips/boston.c +3 -0
index d2ab9da1a0..a560ce0324 100644
@@ -41,6 +41,7 @@
 #include "sysemu/sysemu.h"
 #include "sysemu/qtest.h"
 #include "sysemu/runstate.h"
+#include "sysemu/reset.h"
 
 #include <libfdt.h>
 #include "qom/object.h"
@@ -810,6 +811,8 @@ static void boston_mach_init(MachineState *machine)
             /* Calculate real fdt size after filter */
             dt_size = fdt_totalsize(dtb_load_data);
             rom_add_blob_fixed("dtb", dtb_load_data, dt_size, dtb_paddr);
+            qemu_register_reset(qemu_fdt_randomize_seeds,
+                                rom_ptr(dtb_paddr, dt_size));
         } else {
             /* Try to load file as FIT */
             fit_err = load_fit(&boston_fit_loader, machine->kernel_filename, s);
Signature · 1 line
2.37.3
#10 lore raw

PATCH v2 7/8 reset: allow registering handlers that aren't called by snapshot loading

In reply to Jason A. Donenfeld

Snapshot loading only expects to call deterministic handlers, not non-deterministic ones. So introduce a way of registering handlers that won't be called when reseting for snapshots.

---
 hw/arm/aspeed.c            |  4 ++--
 hw/arm/mps2-tz.c           |  4 ++--
 hw/core/reset.c            | 15 ++++++++++++++-
 hw/hppa/machine.c          |  4 ++--
 hw/i386/microvm.c          |  4 ++--
 hw/i386/pc.c               |  6 +++---
 hw/ppc/pegasos2.c          |  4 ++--
 hw/ppc/pnv.c               |  4 ++--
 hw/ppc/spapr.c             |  4 ++--
 hw/s390x/s390-virtio-ccw.c |  4 ++--
 include/hw/boards.h        |  2 +-
 include/sysemu/reset.h     |  5 ++++-
 migration/savevm.c         |  2 +-
 qapi/run-state.json        |  4 +++-
 softmmu/runstate.c         |  4 ++--
 15 files changed, 44 insertions(+), 26 deletions(-)
hw/arm/aspeed.c +2 -2
index bc3ecdb619..69cadb1c37 100644
@@ -1349,12 +1349,12 @@ static void aspeed_machine_bletchley_class_init(ObjectClass *oc, void *data)
         aspeed_soc_num_cpus(amc->soc_name);
 }
 
-static void fby35_reset(MachineState *state)
+static void fby35_reset(MachineState *state, ShutdownCause reason)
 {
     AspeedMachineState *bmc = ASPEED_MACHINE(state);
     AspeedGPIOState *gpio = &bmc->soc.gpio;
 
-    qemu_devices_reset();
+    qemu_devices_reset(reason);
 
     /* Board ID: 7 (Class-1, 4 slots) */
     object_property_set_bool(OBJECT(gpio), "gpioV4", true, &error_fatal);
hw/arm/mps2-tz.c +2 -2
index 394192b9b2..284c09c91d 100644
@@ -1239,7 +1239,7 @@ static void mps2_set_remap(Object *obj, const char *value, Error **errp)
     }
 }
 
-static void mps2_machine_reset(MachineState *machine)
+static void mps2_machine_reset(MachineState *machine, ShutdownCause reason)
 {
     MPS2TZMachineState *mms = MPS2TZ_MACHINE(machine);
 
@@ -1249,7 +1249,7 @@ static void mps2_machine_reset(MachineState *machine)
      * reset see the correct mapping.
      */
     remap_memory(mms, mms->remap);
-    qemu_devices_reset();
+    qemu_devices_reset(reason);
 }
 
 static void mps2tz_class_init(ObjectClass *oc, void *data)
hw/core/reset.c +14 -1
index 36be82c491..bcf323d6dd 100644
@@ -33,6 +33,7 @@ typedef struct QEMUResetEntry {
     QTAILQ_ENTRY(QEMUResetEntry) entry;
     QEMUResetHandler *func;
     void *opaque;
+    bool skip_on_snapshot_load;
 } QEMUResetEntry;
 
 static QTAILQ_HEAD(, QEMUResetEntry) reset_handlers =
@@ -47,6 +48,16 @@ void qemu_register_reset(QEMUResetHandler *func, void *opaque)
     QTAILQ_INSERT_TAIL(&reset_handlers, re, entry);
 }
 
+void qemu_register_reset_nosnapshotload(QEMUResetHandler *func, void *opaque)
+{
+    QEMUResetEntry *re = g_new0(QEMUResetEntry, 1);
+
+    re->func = func;
+    re->opaque = opaque;
+    re->skip_on_snapshot_load = true;
+    QTAILQ_INSERT_TAIL(&reset_handlers, re, entry);
+}
+
 void qemu_unregister_reset(QEMUResetHandler *func, void *opaque)
 {
     QEMUResetEntry *re;
@@ -60,12 +71,14 @@ void qemu_unregister_reset(QEMUResetHandler *func, void *opaque)
     }
 }
 
-void qemu_devices_reset(void)
+void qemu_devices_reset(ShutdownCause reason)
 {
     QEMUResetEntry *re, *nre;
 
     /* reset all devices */
     QTAILQ_FOREACH_SAFE(re, &reset_handlers, entry, nre) {
+        if (reason == SHUTDOWN_CAUSE_SNAPSHOT_LOAD && re->skip_on_snapshot_load)
+            continue;
         re->func(re->opaque);
     }
 }
hw/hppa/machine.c +2 -2
index e53d5f0fa7..19ea7c2c66 100644
@@ -411,12 +411,12 @@ static void machine_hppa_init(MachineState *machine)
     cpu[0]->env.gr[19] = FW_CFG_IO_BASE;
 }
 
-static void hppa_machine_reset(MachineState *ms)
+static void hppa_machine_reset(MachineState *ms, ShutdownCause reason)
 {
     unsigned int smp_cpus = ms->smp.cpus;
     int i;
 
-    qemu_devices_reset();
+    qemu_devices_reset(reason);
 
     /* Start all CPUs at the firmware entry point.
      *  Monarch CPU will initialize firmware, secondary CPUs
hw/i386/microvm.c +2 -2
index 7fe8cce03e..860cfa00f5 100644
@@ -467,7 +467,7 @@ static void microvm_machine_state_init(MachineState *machine)
     microvm_devices_init(mms);
 }
 
-static void microvm_machine_reset(MachineState *machine)
+static void microvm_machine_reset(MachineState *machine, ShutdownCause reason)
 {
     MicrovmMachineState *mms = MICROVM_MACHINE(machine);
     CPUState *cs;
@@ -480,7 +480,7 @@ static void microvm_machine_reset(MachineState *machine)
         mms->kernel_cmdline_fixed = true;
     }
 
-    qemu_devices_reset();
+    qemu_devices_reset(reason);
 
     CPU_FOREACH(cs) {
         cpu = X86_CPU(cs);
hw/i386/pc.c +3 -3
index 566accf7e6..66a0245a65 100644
@@ -1846,12 +1846,12 @@ static void pc_machine_initfn(Object *obj)
     cxl_machine_init(obj, &pcms->cxl_devices_state);
 }
 
-static void pc_machine_reset(MachineState *machine)
+static void pc_machine_reset(MachineState *machine, ShutdownCause reason)
 {
     CPUState *cs;
     X86CPU *cpu;
 
-    qemu_devices_reset();
+    qemu_devices_reset(reason);
 
     /* Reset APIC after devices have been reset to cancel
      * any changes that qemu_devices_reset() might have done.
@@ -1868,7 +1868,7 @@ static void pc_machine_reset(MachineState *machine)
 static void pc_machine_wakeup(MachineState *machine)
 {
     cpu_synchronize_all_states();
-    pc_machine_reset(machine);
+    pc_machine_reset(machine, SHUTDOWN_CAUSE_NONE);
     cpu_synchronize_all_post_reset();
 }
 
hw/ppc/pegasos2.c +2 -2
index 61f4263953..919d5008ea 100644
@@ -248,14 +248,14 @@ static void pegasos2_pci_config_write(Pegasos2MachineState *pm, int bus,
     pegasos2_mv_reg_write(pm, pcicfg + 4, len, val);
 }
 
-static void pegasos2_machine_reset(MachineState *machine)
+static void pegasos2_machine_reset(MachineState *machine, ShutdownCause reason)
 {
     Pegasos2MachineState *pm = PEGASOS2_MACHINE(machine);
     void *fdt;
     uint64_t d[2];
     int sz;
 
-    qemu_devices_reset();
+    qemu_devices_reset(reason);
     if (!pm->vof) {
         return; /* Firmware should set up machine so nothing to do */
     }
hw/ppc/pnv.c +2 -2
index 78e00afb9b..358a64b397 100644
@@ -643,13 +643,13 @@ static void pnv_powerdown_notify(Notifier *n, void *opaque)
     }
 }
 
-static void pnv_reset(MachineState *machine)
+static void pnv_reset(MachineState *machine, ShutdownCause reason)
 {
     PnvMachineState *pnv = PNV_MACHINE(machine);
     IPMIBmc *bmc;
     void *fdt;
 
-    qemu_devices_reset();
+    qemu_devices_reset(reason);
 
     /*
      * The machine should provide by default an internal BMC simulator.
hw/ppc/spapr.c +2 -2
index 8bbaf4f8a4..6377e4cdb5 100644
@@ -1623,7 +1623,7 @@ void spapr_check_mmu_mode(bool guest_radix)
     }
 }
 
-static void spapr_machine_reset(MachineState *machine)
+static void spapr_machine_reset(MachineState *machine, ShutdownCause reason)
 {
     SpaprMachineState *spapr = SPAPR_MACHINE(machine);
     PowerPCCPU *first_ppc_cpu;
@@ -1649,7 +1649,7 @@ static void spapr_machine_reset(MachineState *machine)
         spapr_setup_hpt(spapr);
     }
 
-    qemu_devices_reset();
+    qemu_devices_reset(reason);
 
     spapr_ovec_cleanup(spapr->ov5_cas);
     spapr->ov5_cas = spapr_ovec_new();
hw/s390x/s390-virtio-ccw.c +2 -2
index 03855c7231..8017acb1d5 100644
@@ -405,7 +405,7 @@ static void s390_pv_prepare_reset(S390CcwMachineState *ms)
     s390_pv_prep_reset();
 }
 
-static void s390_machine_reset(MachineState *machine)
+static void s390_machine_reset(MachineState *machine, ShutdownCause reason)
 {
     S390CcwMachineState *ms = S390_CCW_MACHINE(machine);
     enum s390_reset reset_type;
@@ -427,7 +427,7 @@ static void s390_machine_reset(MachineState *machine)
             s390_machine_unprotect(ms);
         }
 
-        qemu_devices_reset();
+        qemu_devices_reset(reason);
         s390_crypto_reset();
 
         /* configure and start the ipl CPU only */
include/hw/boards.h +1 -1
index 311ed17e18..90f1dd3aeb 100644
@@ -231,7 +231,7 @@ struct MachineClass {
     const char *deprecation_reason;
 
     void (*init)(MachineState *state);
-    void (*reset)(MachineState *state);
+    void (*reset)(MachineState *state, ShutdownCause reason);
     void (*wakeup)(MachineState *state);
     int (*kvm_type)(MachineState *machine, const char *arg);
 
include/sysemu/reset.h +4 -1
index 0b0d6d7598..609e4d50c2 100644
@@ -1,10 +1,13 @@
 #ifndef QEMU_SYSEMU_RESET_H
 #define QEMU_SYSEMU_RESET_H
 
+#include "qapi/qapi-events-run-state.h"
+
 typedef void QEMUResetHandler(void *opaque);
 
 void qemu_register_reset(QEMUResetHandler *func, void *opaque);
+void qemu_register_reset_nosnapshotload(QEMUResetHandler *func, void *opaque);
 void qemu_unregister_reset(QEMUResetHandler *func, void *opaque);
-void qemu_devices_reset(void);
+void qemu_devices_reset(ShutdownCause reason);
 
 #endif
migration/savevm.c +1 -1
index 48e85c052c..a0cdb714f7 100644
@@ -3058,7 +3058,7 @@ bool load_snapshot(const char *name, const char *vmstate,
         goto err_drain;
     }
 
-    qemu_system_reset(SHUTDOWN_CAUSE_NONE);
+    qemu_system_reset(SHUTDOWN_CAUSE_SNAPSHOT_LOAD);
     mis->from_src_file = f;
 
     if (!yank_register_instance(MIGRATION_YANK_INSTANCE, errp)) {
qapi/run-state.json +3 -1
index 9273ea6516..74ed0ac93c 100644
@@ -86,12 +86,14 @@
 #                   ignores --no-reboot. This is useful for sanitizing
 #                   hypercalls on s390 that are used during kexec/kdump/boot
 #
+# @snapshot-load: A snapshot is being loaded by the record & replay subsystem.
+#
 ##
 { 'enum': 'ShutdownCause',
   # Beware, shutdown_caused_by_guest() depends on enumeration order
   'data': [ 'none', 'host-error', 'host-qmp-quit', 'host-qmp-system-reset',
             'host-signal', 'host-ui', 'guest-shutdown', 'guest-reset',
-            'guest-panic', 'subsystem-reset'] }
+            'guest-panic', 'subsystem-reset', 'snapshot-load'] }
 
 ##
 # @StatusInfo:
softmmu/runstate.c +2 -2
index 1e68680b9d..03e1ee3a8a 100644
@@ -441,9 +441,9 @@ void qemu_system_reset(ShutdownCause reason)
     cpu_synchronize_all_states();
 
     if (mc && mc->reset) {
-        mc->reset(current_machine);
+        mc->reset(current_machine, reason);
     } else {
-        qemu_devices_reset();
+        qemu_devices_reset(reason);
     }
     if (reason && reason != SHUTDOWN_CAUSE_SUBSYSTEM_RESET) {
         qapi_event_send_reset(shutdown_caused_by_guest(reason), reason);
Signature · 1 line
2.37.3
#11 lore raw

PATCH v2 8/8 reset: do not re-randomize RNG seed on snapshot load

In reply to Jason A. Donenfeld

Snapshot loading is supposed to be deterministic, so we shouldn't re-randomize the various seeds used.

---
 hw/arm/boot.c      | 3 ++-
 hw/i386/x86.c      | 2 +-
 hw/mips/boston.c   | 2 +-
 hw/openrisc/boot.c | 2 +-
 hw/riscv/boot.c    | 2 +-
 hw/rx/rx-gdbsim.c  | 2 +-
 6 files changed, 7 insertions(+), 6 deletions(-)
hw/arm/boot.c +2 -1
index 6a6f4c92c2..511f7b22b1 100644
@@ -683,7 +683,8 @@ int arm_load_dtb(hwaddr addr, const struct arm_boot_info *binfo,
      * the DTB is copied again upon reset, even if addr points into RAM.
      */
     rom_add_blob_fixed_as("dtb", fdt, size, addr, as);
-    qemu_register_reset(qemu_fdt_randomize_seeds, rom_ptr_for_as(as, addr, size));
+    qemu_register_reset_nosnapshotload(qemu_fdt_randomize_seeds,
+                                       rom_ptr_for_as(as, addr, size));
 
     g_free(fdt);
 
hw/i386/x86.c +1 -1
index 1148f70c03..bd50a064a3 100644
@@ -1111,7 +1111,7 @@ void x86_load_linux(X86MachineState *x86ms,
         setup_data->type = cpu_to_le32(SETUP_RNG_SEED);
         setup_data->len = cpu_to_le32(RNG_SEED_LENGTH);
         qemu_guest_getrandom_nofail(setup_data->data, RNG_SEED_LENGTH);
-        qemu_register_reset(reset_rng_seed, setup_data);
+        qemu_register_reset_nosnapshotload(reset_rng_seed, setup_data);
         fw_cfg_add_bytes_callback(fw_cfg, FW_CFG_KERNEL_DATA, reset_rng_seed, NULL,
                                   setup_data, kernel, kernel_size, true);
     } else {
hw/mips/boston.c +1 -1
index a560ce0324..cab63f43bf 100644
@@ -811,7 +811,7 @@ static void boston_mach_init(MachineState *machine)
             /* Calculate real fdt size after filter */
             dt_size = fdt_totalsize(dtb_load_data);
             rom_add_blob_fixed("dtb", dtb_load_data, dt_size, dtb_paddr);
-            qemu_register_reset(qemu_fdt_randomize_seeds,
+            qemu_register_reset_nosnapshotload(qemu_fdt_randomize_seeds,
                                 rom_ptr(dtb_paddr, dt_size));
         } else {
             /* Try to load file as FIT */
hw/openrisc/boot.c +1 -1
index 8b9f11b6d8..007e80cd5a 100644
@@ -112,7 +112,7 @@ uint32_t openrisc_load_fdt(void *fdt, hwaddr load_start,
 
     rom_add_blob_fixed_as("fdt", fdt, fdtsize, fdt_addr,
                           &address_space_memory);
-    qemu_register_reset(qemu_fdt_randomize_seeds,
+    qemu_register_reset_nosnapshotload(qemu_fdt_randomize_seeds,
                         rom_ptr_for_as(&address_space_memory, fdt_addr, fdtsize));
 
     return fdt_addr;
hw/riscv/boot.c +1 -1
index aaecf21543..c389edb3cd 100644
@@ -242,7 +242,7 @@ uint64_t riscv_load_fdt(hwaddr dram_base, uint64_t mem_size, void *fdt)
 
     rom_add_blob_fixed_as("fdt", fdt, fdtsize, fdt_addr,
                           &address_space_memory);
-    qemu_register_reset(qemu_fdt_randomize_seeds,
+    qemu_register_reset_nosnapshotload(qemu_fdt_randomize_seeds,
                         rom_ptr_for_as(&address_space_memory, fdt_addr, fdtsize));
 
     return fdt_addr;
hw/rx/rx-gdbsim.c +1 -1
index 198d048964..47c17026c7 100644
@@ -149,7 +149,7 @@ static void rx_gdbsim_init(MachineState *machine)
             dtb_offset = ROUND_DOWN(machine->ram_size - dtb_size, 16);
             rom_add_blob_fixed("dtb", dtb, dtb_size,
                                SDRAM_BASE + dtb_offset);
-            qemu_register_reset(qemu_fdt_randomize_seeds,
+            qemu_register_reset_nosnapshotload(qemu_fdt_randomize_seeds,
                                 rom_ptr(SDRAM_BASE + dtb_offset, dtb_size));
             /* Set dtb address to R1 */
             RX_CPU(first_cpu)->env.regs[1] = SDRAM_BASE + dtb_offset;
Signature · 1 line
2.37.3
#12 lore raw
In reply to Jason A. Donenfeld
Quoted 8 lines · Jason A. Donenfeld

When the system reboots, the rng seed that QEMU passes should be re-randomized, so that the new boot gets a new seed. This series wires that up for FDT.

Then, since the record&replay subsystem makes use of reset as well, we add a new reset cause for record&replay, so that we can avoid re-randomizing in these cases.

Quoted 10 lines

Jason A. Donenfeld (8):
device-tree: add re-randomization helper function
arm: re-randomize rng-seed on reboot
riscv: re-randomize rng-seed on reboot
openrisc: re-randomize rng-seed on reboot
rx: re-randomize rng-seed on reboot
mips: re-randomize rng-seed on reboot
reset: allow registering handlers that aren't called by snapshot
loading
reset: do not re-randomize RNG seed on snapshot load

You need to invert the patch order so that the series is bisectable. At the moment you still introduce the reported bug, then fix it in the final patch.

r~

#13 lore raw
Quoted 20 lines · Richard Henderson
Quoted 8 lines · Jason A. Donenfeld

When the system reboots, the rng seed that QEMU passes should be re-randomized, so that the new boot gets a new seed. This series wires that up for FDT.

Then, since the record&replay subsystem makes use of reset as well, we add a new reset cause for record&replay, so that we can avoid re-randomizing in these cases.

Quoted 10 lines

Jason A. Donenfeld (8):
device-tree: add re-randomization helper function
arm: re-randomize rng-seed on reboot
riscv: re-randomize rng-seed on reboot
openrisc: re-randomize rng-seed on reboot
rx: re-randomize rng-seed on reboot
mips: re-randomize rng-seed on reboot
reset: allow registering handlers that aren't called by snapshot
loading
reset: do not re-randomize RNG seed on snapshot load

Quoted 2 lines

You need to invert the patch order so that the series is bisectable. At the moment you still introduce the reported bug, then fix it in the final patch.

I was afraid of that. Okay, will do. v+1 coming your way.

Jason