drm/ast: Convert ast driver to SHMEM
Subsystems (3)
Thomas Zimmermann
maintainerv2 cover drm/ast: Convert ast driver to SHMEM
This patchset converts ast to GEM SHMEM helpers. Fixes problems with memory allocation and BMC scanout updates.
Patches 1 to 3 are fixes for various minor problems in the ast driver. We should merge them even without SHMEM support.
Patches 4 to 6 prepare the driver for the conversion. The cursor double buffering is not required and prevents reuse among the plane code. Style issues are being fixed separately from the conversion.
The conversion itself is in patch 7. Not only does it fix problems with memory allocation, it also brings back several high-res display modes that got lost during the ast driver's conversion to atomic modesetting. There was an earlier RFC patch of this code that had issues with rendering performance. [1] We've meanwhile improved in these area and performance was acceptable on the test systems.
With SHMEM in place, the scanout address for the primary plane does not have to be changed often. Patch 8 fixes a performance problem where the BMC output freezes for several seconds after reprogramming the scanout address or scanline offset.
Tested on AST 2100 and 2300 with fbdev emulation, weston, and Gnome in X11 and Wayland mode.
v2:
* additional fixes for BMC output (Jocelyn)
* fix typos in commit messages (Jocelyn)
[1] https://lore.kernel.org/dri-devel/[email protected]/
Thomas Zimmermann (8):
drm/ast: Acquire I/O-register lock in atomic_commit_tail function drm/ast: Call drm_atomic_helper_check_plane_state() unconditionally drm/ast: Do not call drm_atomic_add_affected_planes() drm/ast: Remove cursor double buffering
drm/ast: Rename struct ast_cursor_plane to struct ast_plane drm/ast: Style cleanups in plane code
drm/ast: Convert ast to SHMEM
drm/ast: Avoid reprogramming primary-plane scanout address
drivers/gpu/drm/ast/Kconfig | 4 +- drivers/gpu/drm/ast/ast_drv.c | 4 +- drivers/gpu/drm/ast/ast_drv.h | 34 +-- drivers/gpu/drm/ast/ast_main.c | 5 +- drivers/gpu/drm/ast/ast_mm.c | 14 +- drivers/gpu/drm/ast/ast_mode.c | 404 ++++++++++++++++----------------- 6 files changed, 222 insertions(+), 243 deletions(-)
base-commit: 74e2443e7681e4d442b45f551ddf12d09a6f00c3
Signature · 1 line
2.37.3
Thomas Zimmermann
maintainerPATCH v2 1/8 drm/ast: Acquire I/O-register lock in atomic_commit_tail function
Hold I/O-register lock in atomic_commit_tail to protect all pipeline updates at once. Protects modesetting against concurrent EDID reads.
Complex modesetting operations involve mode changes and plane updates. These steps used to be protected individually against concurrent I/O. Make all this atomic wrt to reading display modes via EDID. The EDID code in the connector's get_modes helper already acquires the necessary lock.
A similar issue was fixed in commit 2d70b9a1482e ("drm/mgag200: Acquire I/O-register lock in atomic_commit_tail function") for mgag200.
v2:
* fix typo in commit message (Jocelyn)
--- drivers/gpu/drm/ast/ast_mode.c | 34 ++++++++++++++++------------------ 1 file changed, 16 insertions(+), 18 deletions(-)
drivers/gpu/drm/ast/ast_mode.c +16 -18
@@ -1200,20 +1200,6 @@ static int ast_crtc_helper_atomic_check(struct drm_crtc *crtc,return drm_atomic_add_affected_planes (state, crtc); } -static void ast_crtc_helper_atomic_begin (struct drm_crtc *crtc,struct drm_atomic_state *state) -{ -struct drm_device *dev = crtc->dev; -struct ast_private *ast =to_ast_private (dev); - -/* -* Concurrent operations could possibly trigger a call to -* drm_connector_helper_funcs.get_modes by trying to read the -* display modes. Protect access to I/O registers by acquiring -* the I/O-register lock. Released in atomic_flush(). -*/ -mutex_lock (&ast->ioregs_lock); -} -static void ast_crtc_helper_atomic_flush (struct drm_crtc *crtc,struct drm_atomic_state *state)
@@ -1241,8 +1227,6 @@ ast_crtc_helper_atomic_flush(struct drm_crtc *crtc,//Set Aspeed Display-Port if (ast->tx_chip_types &AST_TX_ASTDP_BIT )ast_dp_set_mode (crtc, vbios_mode_info); - -mutex_unlock (&ast->ioregs_lock); } static void
@@ -1301,7 +1285,6 @@ ast_crtc_helper_atomic_disable(struct drm_crtc *crtc,static const struct drm_crtc_helper_funcs ast_crtc_helper_funcs = { .mode_valid = ast_crtc_helper_mode_valid, .atomic_check = ast_crtc_helper_atomic_check, - .atomic_begin = ast_crtc_helper_atomic_begin, .atomic_flush = ast_crtc_helper_atomic_flush, .atomic_enable = ast_crtc_helper_atomic_enable, .atomic_disable = ast_crtc_helper_atomic_disable,
@@ -1771,8 +1754,23 @@ static int ast_astdp_output_init(struct ast_private *ast)* Mode config */ +static void ast_mode_config_helper_atomic_commit_tail (struct drm_atomic_state *state) +{ +struct ast_private *ast =to_ast_private (state->dev); + +/* +* Concurrent operations could possibly trigger a call to +* drm_connector_helper_funcs.get_modes by trying to read the +* display modes. Protect access to I/O registers by acquiring +* the I/O-register lock. Released in atomic_flush(). +*/ +mutex_lock (&ast->ioregs_lock); +drm_atomic_helper_commit_tail_rpm (state); +mutex_unlock (&ast->ioregs_lock); +} +static const struct drm_mode_config_helper_funcs ast_mode_config_helper_funcs = { - .atomic_commit_tail = drm_atomic_helper_commit_tail_rpm, + .atomic_commit_tail = ast_mode_config_helper_atomic_commit_tail, };static const struct drm_mode_config_funcs ast_mode_config_funcs = {
Signature · 1 line
2.37.3
Thomas Zimmermann
maintainerPATCH v2 2/8 drm/ast: Call drm_atomic_helper_check_plane_state() unconditionally
In reply to Thomas ZimmermannAlways call drm_atomic_helper_check_plane_state() in each plane's atomic_check function. At the minimum, it needs to set or clear the plane state's 'visible' field. Otherwise the plane-state handling is bogus and would keep updating planes that have been disabled.
While at it, also warn if the primary plane has been enabled, but is not visible. This cannot legally happen as the plane always covers the entire screen.
--- drivers/gpu/drm/ast/ast_mode.c | 35 +++++++++++++++------------------- 1 file changed, 15 insertions(+), 20 deletions(-)
drivers/gpu/drm/ast/ast_mode.c +15 -20
@@ -578,27 +578,28 @@ static const uint32_t ast_primary_plane_formats[] = {static int ast_primary_plane_helper_atomic_check (struct drm_plane *plane,struct drm_atomic_state *state) { +struct drm_device *dev = plane->dev;struct drm_plane_state *new_plane_state =drm_atomic_get_new_plane_state (state, plane); -struct drm_crtc_state *crtc_state; +struct drm_crtc_state *crtc_state =NULL ;struct ast_crtc_state *ast_crtc_state;int ret; -if (!new_plane_state->crtc) -return 0 ; - - crtc_state =drm_atomic_get_new_crtc_state (state, - new_plane_state->crtc); +if (new_plane_state->crtc) + crtc_state =drm_atomic_get_new_crtc_state (state, new_plane_state->crtc); ret =drm_atomic_helper_check_plane_state (new_plane_state, crtc_state,DRM_PLANE_NO_SCALING ,DRM_PLANE_NO_SCALING , false, true); -if (ret) +if (ret) {return ret; - -if (!new_plane_state->visible) -return 0 ; + }else if (!new_plane_state->visible) { +if (drm_WARN_ON (dev, new_plane_state->crtc))/* cannot legally happen */ +return -EINVAL ; +else +return 0 ; + } ast_crtc_state =to_ast_crtc_state (crtc_state);
@@ -805,25 +806,19 @@ static int ast_cursor_plane_helper_atomic_check(struct drm_plane *plane,struct drm_plane_state *new_plane_state =drm_atomic_get_new_plane_state (state, plane);struct drm_framebuffer *fb = new_plane_state->fb; -struct drm_crtc_state *crtc_state; +struct drm_crtc_state *crtc_state =NULL ;int ret; -if (!new_plane_state->crtc) -return 0 ; - - crtc_state =drm_atomic_get_new_crtc_state (state, - new_plane_state->crtc); +if (new_plane_state->crtc) + crtc_state =drm_atomic_get_new_crtc_state (state, new_plane_state->crtc); ret =drm_atomic_helper_check_plane_state (new_plane_state, crtc_state,DRM_PLANE_NO_SCALING ,DRM_PLANE_NO_SCALING , true, true); -if (ret) +if (ret || !new_plane_state->visible)return ret; -if (!new_plane_state->visible) -return 0 ; -if (fb->width >AST_MAX_HWC_WIDTH || fb->height >AST_MAX_HWC_HEIGHT )return -EINVAL ;
Signature · 1 line
2.37.3
Thomas Zimmermann
maintainerPATCH v2 3/8 drm/ast: Do not call drm_atomic_add_affected_planes()
In reply to Thomas ZimmermannThere's no need to add planes to the atomic state. Remove the call to drm_atomic_add_affected_planes() from ast.
On full modesets, the DRM helpers already add a CRTC's planes to the atomic state; see drm_atomic_helper_check_modeset(). There's no reason to call drm_atomic_add_affected_planes() unconditionally in the CRTC's atomic_check() in ast. It's also too late, as the atomic_check() of the added planes will not be called before the commit.
--- drivers/gpu/drm/ast/ast_mode.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/gpu/drm/ast/ast_mode.c +2 -3
@@ -1157,7 +1157,7 @@ static int ast_crtc_helper_atomic_check(struct drm_crtc *crtc,int ret;if (!crtc_state->enable) - goto out; +return 0 ; ret =drm_atomic_helper_check_crtc_primary_plane (crtc_state);if (ret)
@@ -1191,8 +1191,7 @@ static int ast_crtc_helper_atomic_check(struct drm_crtc *crtc,if (!succ)return -EINVAL ; -out: -return drm_atomic_add_affected_planes (state, crtc); +return 0 ; } static void
Signature · 1 line
2.37.3
Thomas Zimmermann
maintainerPATCH v2 4/8 drm/ast: Remove cursor double buffering
In reply to Thomas ZimmermannUpdate the cursor image via damage handling in-place. The cursor's double buffering has no visible effect on the output, so remove it.
Done in preparation of switching ast to GEM SHMEM helpers. Removing double buffering will allow us to use the same data structure for primary and cursor plane.
--- drivers/gpu/drm/ast/ast_drv.h | 12 ++--- drivers/gpu/drm/ast/ast_mode.c | 83 +++++++++++++--------------------- 2 files changed, 35 insertions(+), 60 deletions(-)
drivers/gpu/drm/ast/ast_drv.h +3 -9
@@ -96,8 +96,6 @@ enum ast_tx_chip {#define AST_HWC_SIZE (AST_MAX_HWC_WIDTH * AST_MAX_HWC_HEIGHT * 2)#define AST_HWC_SIGNATURE_SIZE 32 -#define AST_DEFAULT_HWC_NUM 2 -/* define for signature structure */ #define AST_HWC_SIGNATURE_CHECKSUM 0x00#define AST_HWC_SIGNATURE_SizeX 0x04
@@ -110,13 +108,9 @@ enum ast_tx_chip {struct ast_cursor_plane {struct drm_plane base; -struct { -struct drm_gem_vram_object *gbo; -struct iosys_map map; -u64 off; - } hwc[AST_DEFAULT_HWC_NUM ]; - -unsigned int next_hwc_index; +struct drm_gem_vram_object *gbo; +struct iosys_map map; +u64 off; }; static inline struct ast_cursor_plane *
drivers/gpu/drm/ast/ast_mode.c +32 -51
132 lines not on this page · raw message
Signature · 1 line
2.37.3
Thomas Zimmermann
maintainerPATCH v2 5/8 drm/ast: Rename struct ast_cursor_plane to struct ast_plane
In reply to Thomas ZimmermannRename the plane structure struct ast_cursor_plane to struct ast_plane as it will be used for the primary plane as well. No functional changes.
--- drivers/gpu/drm/ast/ast_drv.h | 15 +++++++++------ drivers/gpu/drm/ast/ast_mode.c | 22 +++++++++++----------- 2 files changed, 20 insertions(+), 17 deletions(-)
drivers/gpu/drm/ast/ast_drv.h +9 -6
@@ -87,7 +87,7 @@ enum ast_tx_chip {#define AST_DRAM_8Gx16 8/* -* Cursor plane +* Hardware cursor */ #define AST_MAX_HWC_WIDTH 64
@@ -105,7 +105,11 @@ enum ast_tx_chip {#define AST_HWC_SIGNATURE_HOTSPOTX 0x14#define AST_HWC_SIGNATURE_HOTSPOTY 0x18 -struct ast_cursor_plane { +/* +* Planes +*/ + +struct ast_plane {struct drm_plane base;struct drm_gem_vram_object *gbo;
@@ -113,10 +117,9 @@ struct ast_cursor_plane {u64 off; }; -static inline struct ast_cursor_plane * -to_ast_cursor_plane (struct drm_plane *plane) +static inline struct ast_plane *to_ast_plane (struct drm_plane *plane) { - return container_of(plane, struct ast_cursor_plane, base); + return container_of(plane, struct ast_plane, base); }/*
@@ -170,7 +173,7 @@ struct ast_private {uint32_t mclk;struct drm_plane primary_plane; -struct ast_cursor_plane cursor_plane; +struct ast_plane cursor_plane;struct drm_crtc crtc; struct { struct {
drivers/gpu/drm/ast/ast_mode.c +11 -11
@@ -829,7 +829,7 @@ static void ast_cursor_plane_helper_atomic_update(struct drm_plane *plane, struct drm_atomic_state *state) { - struct ast_cursor_plane *ast_cursor_plane = to_ast_cursor_plane(plane); + struct ast_plane *ast_plane = to_ast_plane(plane);struct drm_plane_state *old_state =drm_atomic_get_old_plane_state (state, plane); struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state,
@@ -837,8 +837,8 @@ ast_cursor_plane_helper_atomic_update(struct drm_plane *plane,struct drm_shadow_plane_state *shadow_plane_state =to_drm_shadow_plane_state (new_state);struct drm_framebuffer *fb = new_state->fb;struct ast_private *ast =to_ast_private (plane->dev); -struct iosys_map dst_map = ast_cursor_plane->map; -u64 dst_off = ast_cursor_plane->off; +struct iosys_map dst_map = ast_plane->map; +u64 dst_off = ast_plane->off;struct iosys_map src_map = shadow_plane_state->data[0 ];unsigned int offset_x, offset_y;u16 x, y;
@@ -910,9 +910,9 @@ static const struct drm_plane_helper_funcs ast_cursor_plane_helper_funcs = {static void ast_cursor_plane_destroy (struct drm_plane *plane) { -struct ast_cursor_plane *ast_cursor_plane =to_ast_cursor_plane (plane); -struct drm_gem_vram_object *gbo = ast_cursor_plane->gbo; -struct iosys_map map = ast_cursor_plane->map; +struct ast_plane *ast_plane =to_ast_plane (plane); +struct drm_gem_vram_object *gbo = ast_plane->gbo; +struct iosys_map map = ast_plane->map;drm_gem_vram_vunmap (gbo, &map);drm_gem_vram_unpin (gbo);
@@ -931,8 +931,8 @@ static const struct drm_plane_funcs ast_cursor_plane_funcs = {static int ast_cursor_plane_init (struct ast_private *ast) {struct drm_device *dev = &ast->base; -struct ast_cursor_plane *ast_cursor_plane = &ast->cursor_plane; -struct drm_plane *cursor_plane = &ast_cursor_plane->base; +struct ast_plane *ast_plane = &ast->cursor_plane; +struct drm_plane *cursor_plane = &ast_plane->base;size_t size;struct drm_gem_vram_object *gbo;struct iosys_map map;
@@ -963,9 +963,9 @@ static int ast_cursor_plane_init(struct ast_private *ast) goto err_drm_gem_vram_vunmap; } - ast_cursor_plane->gbo = gbo; - ast_cursor_plane->map = map; - ast_cursor_plane->off = off; + ast_plane->gbo = gbo; + ast_plane->map = map; + ast_plane->off = off;/* * Create the cursor plane. The plane's destroy callback will release
Signature · 1 line
2.37.3
Thomas Zimmermann
maintainerPATCH v2 6/8 drm/ast: Style cleanups in plane code
In reply to Thomas ZimmermannRename some of the variables in the plane code to better reflect the old and new state during checks and updates. Change some indention as well. No functional changes.
--- drivers/gpu/drm/ast/ast_mode.c | 104 ++++++++++++++------------------- 1 file changed, 45 insertions(+), 59 deletions(-)
drivers/gpu/drm/ast/ast_mode.c +45 -59
@@ -579,16 +579,15 @@ static int ast_primary_plane_helper_atomic_check(struct drm_plane *plane, struct drm_atomic_state *state) {struct drm_device *dev = plane->dev; -struct drm_plane_state *new_plane_state =drm_atomic_get_new_plane_state (state, - plane); -struct drm_crtc_state *crtc_state =NULL ; -struct ast_crtc_state *ast_crtc_state; +struct drm_plane_state *new_plane_state =drm_atomic_get_new_plane_state (state, plane); +struct drm_crtc_state *new_crtc_state =NULL ; +struct ast_crtc_state *new_ast_crtc_state;int ret;if (new_plane_state->crtc) - crtc_state =drm_atomic_get_new_crtc_state (state, new_plane_state->crtc); + new_crtc_state =drm_atomic_get_new_crtc_state (state, new_plane_state->crtc); - ret =drm_atomic_helper_check_plane_state (new_plane_state, crtc_state, + ret =drm_atomic_helper_check_plane_state (new_plane_state, new_crtc_state,DRM_PLANE_NO_SCALING ,DRM_PLANE_NO_SCALING , false, true);
@@ -601,30 +600,28 @@ static int ast_primary_plane_helper_atomic_check(struct drm_plane *plane,return 0 ; } - ast_crtc_state =to_ast_crtc_state (crtc_state); + new_ast_crtc_state =to_ast_crtc_state (new_crtc_state); - ast_crtc_state->format = new_plane_state->fb->format; + new_ast_crtc_state->format = new_plane_state->fb->format;return 0 ; } -static void -ast_primary_plane_helper_atomic_update (struct drm_plane *plane, -struct drm_atomic_state *state) +static void ast_primary_plane_helper_atomic_update (struct drm_plane *plane, +struct drm_atomic_state *state) { -struct drm_plane_state *old_state =drm_atomic_get_old_plane_state (state, - plane);struct drm_device *dev = plane->dev;struct ast_private *ast =to_ast_private (dev); -struct drm_plane_state *new_state =drm_atomic_get_new_plane_state (state, - plane); +struct drm_plane_state *plane_state =drm_atomic_get_new_plane_state (state, plane); +struct drm_framebuffer *fb = plane_state->fb; +struct drm_plane_state *old_plane_state =drm_atomic_get_old_plane_state (state, plane); +struct drm_framebuffer *old_fb = old_plane_state->fb;struct drm_gem_vram_object *gbo;s64 gpu_addr; -struct drm_framebuffer *fb = new_state->fb; -struct drm_framebuffer *old_fb = old_state->fb;if (!old_fb || (fb->format != old_fb->format)) { -struct drm_crtc_state *crtc_state = new_state->crtc->state; +struct drm_crtc *crtc = plane_state->crtc; +struct drm_crtc_state *crtc_state =drm_atomic_get_new_crtc_state (state, crtc);struct ast_crtc_state *ast_crtc_state =to_ast_crtc_state (crtc_state);struct ast_vbios_mode_info *vbios_mode_info = &ast_crtc_state->vbios_mode_info;
@@ -643,9 +640,8 @@ ast_primary_plane_helper_atomic_update(struct drm_plane *plane,ast_set_index_reg_mask (ast,AST_IO_SEQ_PORT ,0x1 ,0xdf ,0x00 ); } -static void -ast_primary_plane_helper_atomic_disable (struct drm_plane *plane, -struct drm_atomic_state *state) +static void ast_primary_plane_helper_atomic_disable (struct drm_plane *plane, +struct drm_atomic_state *state) {struct ast_private *ast =to_ast_private (plane->dev);
@@ -803,39 +799,36 @@ static const uint32_t ast_cursor_plane_formats[] = {static int ast_cursor_plane_helper_atomic_check (struct drm_plane *plane,struct drm_atomic_state *state) { -struct drm_plane_state *new_plane_state =drm_atomic_get_new_plane_state (state, - plane); -struct drm_framebuffer *fb = new_plane_state->fb; -struct drm_crtc_state *crtc_state =NULL ; +struct drm_plane_state *new_plane_state =drm_atomic_get_new_plane_state (state, plane); +struct drm_framebuffer *new_fb = new_plane_state->fb; +struct drm_crtc_state *new_crtc_state =NULL ;int ret;if (new_plane_state->crtc) - crtc_state =drm_atomic_get_new_crtc_state (state, new_plane_state->crtc); + new_crtc_state =drm_atomic_get_new_crtc_state (state, new_plane_state->crtc); - ret =drm_atomic_helper_check_plane_state (new_plane_state, crtc_state, + ret =drm_atomic_helper_check_plane_state (new_plane_state, new_crtc_state,DRM_PLANE_NO_SCALING ,DRM_PLANE_NO_SCALING , true, true);if (ret || !new_plane_state->visible)return ret; -if (fb->width >AST_MAX_HWC_WIDTH || fb->height >AST_MAX_HWC_HEIGHT ) +if (new_fb->width >AST_MAX_HWC_WIDTH || new_fb->height >AST_MAX_HWC_HEIGHT )return -EINVAL ;return 0 ; } -static void -ast_cursor_plane_helper_atomic_update (struct drm_plane *plane, -struct drm_atomic_state *state) +static void ast_cursor_plane_helper_atomic_update (struct drm_plane *plane, +struct drm_atomic_state *state) {struct ast_plane *ast_plane =to_ast_plane (plane); -struct drm_plane_state *old_state =drm_atomic_get_old_plane_state (state, - plane); -struct drm_plane_state *new_state =drm_atomic_get_new_plane_state (state, - plane); -struct drm_shadow_plane_state *shadow_plane_state =to_drm_shadow_plane_state (new_state); -struct drm_framebuffer *fb = new_state->fb; +struct drm_plane_state *plane_state =drm_atomic_get_new_plane_state (state, plane); +struct drm_shadow_plane_state *shadow_plane_state =to_drm_shadow_plane_state (plane_state); +struct drm_framebuffer *fb = plane_state->fb; +struct drm_plane_state *old_plane_state =drm_atomic_get_old_plane_state (state, plane); +struct drm_framebuffer *old_fb = old_plane_state->fb;struct ast_private *ast =to_ast_private (plane->dev);struct iosys_map dst_map = ast_plane->map;u64 dst_off = ast_plane->off;
@@ -858,32 +851,32 @@ ast_cursor_plane_helper_atomic_update(struct drm_plane *plane,ast_update_cursor_image (dst, src, fb->width, fb->height); -if (new_state->fb != old_state->fb) +if (fb != old_fb)ast_set_cursor_base (ast, dst_off);/* * Update location in HWC signature and registers. */ -writel (new_state->crtc_x, sig +AST_HWC_SIGNATURE_X ); -writel (new_state->crtc_y, sig +AST_HWC_SIGNATURE_Y ); +writel (plane_state->crtc_x, sig +AST_HWC_SIGNATURE_X ); +writel (plane_state->crtc_y, sig +AST_HWC_SIGNATURE_Y ); offset_x =AST_MAX_HWC_WIDTH - fb->width; offset_y =AST_MAX_HWC_HEIGHT - fb->height; -if (new_state->crtc_x <0 ) { - x_offset = (-new_state->crtc_x) + offset_x; +if (plane_state->crtc_x <0 ) { + x_offset = (-plane_state->crtc_x) + offset_x; x =0 ; }else { x_offset = offset_x; - x = new_state->crtc_x; + x = plane_state->crtc_x; } -if (new_state->crtc_y <0 ) { - y_offset = (-new_state->crtc_y) + offset_y; +if (plane_state->crtc_y <0 ) { + y_offset = (-plane_state->crtc_y) + offset_y; y =0 ; }else { y_offset = offset_y; - y = new_state->crtc_y; + y = plane_state->crtc_y; }ast_set_cursor_location (ast, x, y, x_offset, y_offset);
@@ -892,9 +885,8 @@ ast_cursor_plane_helper_atomic_update(struct drm_plane *plane,ast_set_cursor_enabled (ast, true); } -static void -ast_cursor_plane_helper_atomic_disable (struct drm_plane *plane, -struct drm_atomic_state *state) +static void ast_cursor_plane_helper_atomic_disable (struct drm_plane *plane, +struct drm_atomic_state *state) {struct ast_private *ast =to_ast_private (plane->dev);
@@ -1204,13 +1196,11 @@ ast_crtc_helper_atomic_flush(struct drm_crtc *crtc,ast_dp_set_mode (crtc, vbios_mode_info); } -static void -ast_crtc_helper_atomic_enable (struct drm_crtc *crtc, -struct drm_atomic_state *state) +static void ast_crtc_helper_atomic_enable (struct drm_crtc *crtc,struct drm_atomic_state *state) {struct drm_device *dev = crtc->dev;struct ast_private *ast =to_ast_private (dev); -struct drm_crtc_state *crtc_state = crtc->state; +struct drm_crtc_state *crtc_state =drm_atomic_get_new_crtc_state (state, crtc);struct ast_crtc_state *ast_crtc_state =to_ast_crtc_state (crtc_state);struct ast_vbios_mode_info *vbios_mode_info = &ast_crtc_state->vbios_mode_info;
@@ -1227,12 +1217,9 @@ ast_crtc_helper_atomic_enable(struct drm_crtc *crtc,ast_crtc_dpms (crtc,DRM_MODE_DPMS_ON ); } -static void -ast_crtc_helper_atomic_disable (struct drm_crtc *crtc, -struct drm_atomic_state *state) +static void ast_crtc_helper_atomic_disable (struct drm_crtc *crtc,struct drm_atomic_state *state) { -struct drm_crtc_state *old_crtc_state =drm_atomic_get_old_crtc_state (state, - crtc); +struct drm_crtc_state *old_crtc_state =drm_atomic_get_old_crtc_state (state, crtc);struct drm_device *dev = crtc->dev;struct ast_private *ast =to_ast_private (dev);
@@ -1787,7 +1774,6 @@ int ast_mode_config_init(struct ast_private *ast) dev->mode_config.helper_private = &ast_mode_config_helper_funcs; - ret =ast_primary_plane_init (ast);if (ret)return ret;
Signature · 1 line
2.37.3
Thomas Zimmermann
maintainerPATCH v2 7/8 drm/ast: Convert ast to SHMEM
In reply to Thomas ZimmermannReplace GEM VRAM helpers with GEM SHMEM helpers in ast. Avoids OOM errors when allocating video memory. Also adds support for dma-buf functionality.
Aspeed display hardware supports display resolutions of FullHD and higher at 32-bit pixel depth. But the amount of video memory is in the range of 8 MiB to 32 MiB, which adds constraints to the actually available resolutions. As atomic modesetting with VRAM helpers requires double buffering in video memory, ast fails to pageflip in some configurations. For example, FullHD with an active cursor plane does not work on devices with 16 MiB of video memory.
Resolve this problem by converting the ast driver to GEM SHMEM helpers. Keep the buffer objects in system memory and copy to video memory on pageflips via shadow-plane helpers. Userspace used to require shadow planes for decent performance, but that's now provided by the driver. To replace the memory management, the patch also implements damage handling for the primary plane.
With GEM SHMEM helpers, dma-buf import and export is now supported by ast. This allows easier screen mirroring across devices or with an Aspeed-based BMC. A corresponding feature request is available at [1].
v2:
* fix typos in commit message (Jocelyn)
--- drivers/gpu/drm/ast/Kconfig | 4 +- drivers/gpu/drm/ast/ast_drv.c | 4 +- drivers/gpu/drm/ast/ast_drv.h | 13 ++- drivers/gpu/drm/ast/ast_main.c | 5 +- drivers/gpu/drm/ast/ast_mm.c | 14 +-- drivers/gpu/drm/ast/ast_mode.c | 204 +++++++++++++++++---------------- 6 files changed, 129 insertions(+), 115 deletions(-)
drivers/gpu/drm/ast/Kconfig +1 -3
@@ -2,10 +2,8 @@ config DRM_AST tristate "AST server chips" depends on DRM && PCI && MMU + select DRM_GEM_SHMEM_HELPER select DRM_KMS_HELPER - select DRM_VRAM_HELPER - select DRM_TTM - select DRM_TTM_HELPER help Say yes for experimental AST GPU driver. Do not enable this driver without having a working -modesetting,
drivers/gpu/drm/ast/ast_drv.c +2 -2
@@ -33,7 +33,7 @@#include <drm/drm_atomic_helper.h> #include <drm/drm_crtc_helper.h> #include <drm/drm_drv.h> -#include <drm/drm_gem_vram_helper.h> +#include <drm/drm_gem_shmem_helper.h> #include <drm/drm_module.h> #include <drm/drm_probe_helper.h>
@@ -63,7 +63,7 @@ static const struct drm_driver ast_driver = { .minor = DRIVER_MINOR, .patchlevel = DRIVER_PATCHLEVEL, -DRM_GEM_VRAM_DRIVER +DRM_GEM_SHMEM_DRIVER_OPS };/*
drivers/gpu/drm/ast/ast_drv.h +9 -4
@@ -112,9 +112,9 @@ enum ast_tx_chip {struct ast_plane {struct drm_plane base; -struct drm_gem_vram_object *gbo; -struct iosys_map map; -u64 off; +void __iomem *vaddr; +u64 offset; +unsigned long size; };static inline struct ast_plane *to_ast_plane (struct drm_plane *plane)
@@ -172,7 +172,12 @@ struct ast_private {uint32_t dram_type;uint32_t mclk; -struct drm_plane primary_plane; +void __iomem *vram; +unsigned long vram_base; +unsigned long vram_size; +unsigned long vram_fb_available; + +struct ast_plane primary_plane;struct ast_plane cursor_plane;struct drm_crtc crtc;struct {
drivers/gpu/drm/ast/ast_main.c +2 -3
@@ -32,7 +32,6 @@#include <drm/drm_crtc_helper.h> #include <drm/drm_drv.h> #include <drm/drm_gem.h> -#include <drm/drm_gem_vram_helper.h> #include <drm/drm_managed.h> #include "ast_drv.h"
@@ -461,8 +460,8 @@ struct ast_private *ast_device_create(const struct drm_driver *drv,/* map reserved buffer */ ast->dp501_fw_buf =NULL ; -if (dev->vram_mm->vram_size <pci_resource_len (pdev,0 )) { - ast->dp501_fw_buf =pci_iomap_range (pdev,0 , dev->vram_mm->vram_size,0 ); +if (ast->vram_size <pci_resource_len (pdev,0 )) { + ast->dp501_fw_buf =pci_iomap_range (pdev,0 , ast->vram_size,0 );if (!ast->dp501_fw_buf)drm_info (dev,"failed to map reserved buffer!\n" ); }
drivers/gpu/drm/ast/ast_mm.c +7 -7
@@ -28,7 +28,6 @@#include <linux/pci.h> -#include <drm/drm_gem_vram_helper.h> #include <drm/drm_managed.h> #include <drm/drm_print.h>
@@ -80,7 +79,6 @@ int ast_mm_init(struct ast_private *ast)struct pci_dev *pdev =to_pci_dev (dev->dev);resource_size_t base, size;u32 vram_size; -int ret; base =pci_resource_start (pdev,0 ); size =pci_resource_len (pdev,0 );
@@ -91,11 +89,13 @@ int ast_mm_init(struct ast_private *ast) vram_size =ast_get_vram_size (ast); - ret =drmm_vram_helper_init (dev, base, vram_size); -if (ret) { -drm_err (dev,"Error initializing VRAM MM; %d\n" , ret); -return ret; - } + ast->vram =devm_ioremap_wc (dev->dev, base, vram_size); +if (!ast->vram) +return -ENOMEM ; + + ast->vram_base = base; + ast->vram_size = vram_size; + ast->vram_fb_available = vram_size;return 0 ; }
drivers/gpu/drm/ast/ast_mode.c +108 -96
331 lines not on this page · raw message
Signature · 1 line
2.37.3
Thomas Zimmermann
maintainerPATCH v2 8/8 drm/ast: Avoid reprogramming primary-plane scanout address
In reply to Thomas ZimmermannSome AST-based BMCs stop display output for up to 5 seconds after reprogramming the scanout address. As the address is fixed, avoid re-setting the address' value.
v2:
* only update offset if it changed (Jocelyn)
--- drivers/gpu/drm/ast/ast_mode.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-)
drivers/gpu/drm/ast/ast_mode.c +13 -4
@@ -671,10 +671,19 @@ static void ast_primary_plane_helper_atomic_update(struct drm_plane *plane,ast_handle_damage (ast_plane, shadow_plane_state->data, fb, &damage); } -ast_set_offset_reg (ast, fb); -ast_set_start_address_crt1 (ast, (u32 )ast_plane->offset); - -ast_set_index_reg_mask (ast,AST_IO_SEQ_PORT ,0x1 ,0xdf ,0x00 ); +/* +* Some BMCs stop scanning out the video signal after the driver +* reprogrammed the offset or scanout address. This stalls display +* output for several seconds and makes the display unusable. +* Therefore only update the offset if it changes and reprogram the +* address after enabling the plane. +*/ +if (!old_fb || old_fb->pitches[0 ] != fb->pitches[0 ]) +ast_set_offset_reg (ast, fb); +if (!old_fb) { +ast_set_start_address_crt1 (ast, (u32 )ast_plane->offset); +ast_set_index_reg_mask (ast,AST_IO_SEQ_PORT ,0x1 ,0xdf ,0x00 ); + } } static void ast_primary_plane_helper_atomic_disable(struct drm_plane *plane,
Signature · 1 line
2.37.3