arm64: dts: mt8195: Add Ethernet controller
Subsystems (2)
v4 cover arm64: dts: mt8195: Add Ethernet controller
Changes in v4:
1. remove {address,size}-cells = <0> to avoid warning as Angelo's feedback.
2. Add reviewd-by as Angelo's comments.
Changes in v3:
1. move stmmac-axi-config, rx-queues-config, tx-queues-configs inside ethernet node as Angelo's comments.
2. add {address,size}-cells = <0> in ethernet node as Angelo's comments.
Changes in v2:
1. modify pinctrl node used by ethernet to match rules in pinctrl-mt8195.yaml, which is pointed by Krzysztof.
2. remove "mac-address" property in ethernet node as comments of Krzysztof.
Changes in v1:
add dts node for MT8195 Ethernet controller
Biao Huang (1):
arm64: dts: mt8195: Add Ethernet controller
arch/arm64/boot/dts/mediatek/mt8195-demo.dts | 88 ++++++++++++++++++++ arch/arm64/boot/dts/mediatek/mt8195.dtsi | 86 +++++++++++++++++++ 2 files changed, 174 insertions(+)
Signature · 1 line
2.18.0
PATCH v4 1/1 arm64: dts: mt8195: Add Ethernet controller
Add Ethernet controller node for mt8195.
--- arch/arm64/boot/dts/mediatek/mt8195-demo.dts | 88 ++++++++++++++++++++ arch/arm64/boot/dts/mediatek/mt8195.dtsi | 86 +++++++++++++++++++ 2 files changed, 174 insertions(+)
arch/arm64/boot/dts/mediatek/mt8195-demo.dts +88 -0
@@ -258,6 +258,72 @@ &mt6359_vsram_others_ldo_reg { }; &pio { + eth_default_pins: eth-default-pins { + pins-txd { + pinmux = <PINMUX_GPIO77__FUNC_GBE_TXD3>, + <PINMUX_GPIO78__FUNC_GBE_TXD2>, + <PINMUX_GPIO79__FUNC_GBE_TXD1>, + <PINMUX_GPIO80__FUNC_GBE_TXD0>; + drive-strength = <MTK_DRIVE_8mA>; + }; + pins-cc { + pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>, + <PINMUX_GPIO88__FUNC_GBE_TXEN>, + <PINMUX_GPIO87__FUNC_GBE_RXDV>, + <PINMUX_GPIO86__FUNC_GBE_RXC>; + drive-strength = <MTK_DRIVE_8mA>; + }; + pins-rxd { + pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>, + <PINMUX_GPIO82__FUNC_GBE_RXD2>, + <PINMUX_GPIO83__FUNC_GBE_RXD1>, + <PINMUX_GPIO84__FUNC_GBE_RXD0>; + }; + pins-mdio { + pinmux = <PINMUX_GPIO89__FUNC_GBE_MDC>, + <PINMUX_GPIO90__FUNC_GBE_MDIO>; + input-enable; + }; + pins-power { + pinmux = <PINMUX_GPIO91__FUNC_GPIO91>, + <PINMUX_GPIO92__FUNC_GPIO92>; + output-high; + }; + }; + + eth_sleep_pins: eth-sleep-pins { + pins-txd { + pinmux = <PINMUX_GPIO77__FUNC_GPIO77>, + <PINMUX_GPIO78__FUNC_GPIO78>, + <PINMUX_GPIO79__FUNC_GPIO79>, + <PINMUX_GPIO80__FUNC_GPIO80>; + }; + pins-cc { + pinmux = <PINMUX_GPIO85__FUNC_GPIO85>, + <PINMUX_GPIO88__FUNC_GPIO88>, + <PINMUX_GPIO87__FUNC_GPIO87>, + <PINMUX_GPIO86__FUNC_GPIO86>; + }; + pins-rxd { + pinmux = <PINMUX_GPIO81__FUNC_GPIO81>, + <PINMUX_GPIO82__FUNC_GPIO82>, + <PINMUX_GPIO83__FUNC_GPIO83>, + <PINMUX_GPIO84__FUNC_GPIO84>; + }; + pins-mdio { + pinmux = <PINMUX_GPIO89__FUNC_GPIO89>, + <PINMUX_GPIO90__FUNC_GPIO90>; + input-disable; + bias-disable; + }; + pins-power { + pinmux = <PINMUX_GPIO91__FUNC_GPIO91>, + <PINMUX_GPIO92__FUNC_GPIO92>; + input-disable; + bias-disable; + }; + }; + gpio_keys_pins: gpio-keys-pins { pins { pinmux = <PINMUX_GPIO106__FUNC_GPIO106>;
@@ -434,6 +500,28 @@ &xhci0 { status = "okay"; }; +ð { + phy-mode ="rgmii-rxid"; + phy-handle = <ðernet_phy0>; + snps,reset-gpio = <&pio 93 GPIO_ACTIVE_HIGH>; + snps,reset-delays-us = <0 10000 10000>; + mediatek,tx-delay-ps = <2030>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <ð_default_pins>; + pinctrl-1 = <ð_sleep_pins>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + ethernet_phy0: ethernet-phy@1 { + compatible = "ethernet-phy-id001c.c916"; + reg = <0x1>; + }; + }; +}; + &xhci1 { vusb33-supply = <&mt6359_vusb_ldo_reg>; status = "okay";
arch/arm64/boot/dts/mediatek/mt8195.dtsi +86 -0
92 lines not on this page · raw message
Signature · 1 line
2.25.1
Quoted 4 lines · Biao Huang
Add Ethernet controller node for mt8195.
Signed-off-by Biao Huang <[email protected]>Reviewed-by AngeloGioacchino Del Regno <[email protected]>
Dear Matthias,
Biao also found this patch for ethernet node seems missing in 6.2 dts pull-request.
Just a remind for this patch.
Please help to review this patch if you have time. Thanks!
Quoted 198 lines
--- arch/arm64/boot/dts/mediatek/mt8195-demo.dts | 88 ++++++++++++++++++++ arch/arm64/boot/dts/mediatek/mt8195.dtsi | 86 +++++++++++++++++++ 2 files changed, 174 insertions(+)arch/arm64/boot/dts/mediatek/mt8195-demo.dts +88
-0@@ -258,6 +258,72 @@ &mt6359_vsram_others_ldo_reg { }; &pio { + eth_default_pins: eth-default-pins { + pins-txd { + pinmux = <PINMUX_GPIO77__FUNC_GBE_TXD3>, + <PINMUX_GPIO78__FUNC_GBE_TXD2>, + <PINMUX_GPIO79__FUNC_GBE_TXD1>, + <PINMUX_GPIO80__FUNC_GBE_TXD0>; + drive-strength = <MTK_DRIVE_8mA>; + }; + pins-cc { + pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>, + <PINMUX_GPIO88__FUNC_GBE_TXEN>, + <PINMUX_GPIO87__FUNC_GBE_RXDV>, + <PINMUX_GPIO86__FUNC_GBE_RXC>; + drive-strength = <MTK_DRIVE_8mA>; + }; + pins-rxd { + pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>, + <PINMUX_GPIO82__FUNC_GBE_RXD2>, + <PINMUX_GPIO83__FUNC_GBE_RXD1>, + <PINMUX_GPIO84__FUNC_GBE_RXD0>; + }; + pins-mdio { + pinmux = <PINMUX_GPIO89__FUNC_GBE_MDC>, + <PINMUX_GPIO90__FUNC_GBE_MDIO>; + input-enable; + }; + pins-power { + pinmux = <PINMUX_GPIO91__FUNC_GPIO91>, + <PINMUX_GPIO92__FUNC_GPIO92>; + output-high; + }; + }; + + eth_sleep_pins: eth-sleep-pins { + pins-txd { + pinmux = <PINMUX_GPIO77__FUNC_GPIO77>, + <PINMUX_GPIO78__FUNC_GPIO78>, + <PINMUX_GPIO79__FUNC_GPIO79>, + <PINMUX_GPIO80__FUNC_GPIO80>; + }; + pins-cc { + pinmux = <PINMUX_GPIO85__FUNC_GPIO85>, + <PINMUX_GPIO88__FUNC_GPIO88>, + <PINMUX_GPIO87__FUNC_GPIO87>, + <PINMUX_GPIO86__FUNC_GPIO86>; + }; + pins-rxd { + pinmux = <PINMUX_GPIO81__FUNC_GPIO81>, + <PINMUX_GPIO82__FUNC_GPIO82>, + <PINMUX_GPIO83__FUNC_GPIO83>, + <PINMUX_GPIO84__FUNC_GPIO84>; + }; + pins-mdio { + pinmux = <PINMUX_GPIO89__FUNC_GPIO89>, + <PINMUX_GPIO90__FUNC_GPIO90>; + input-disable; + bias-disable; + }; + pins-power { + pinmux = <PINMUX_GPIO91__FUNC_GPIO91>, + <PINMUX_GPIO92__FUNC_GPIO92>; + input-disable; + bias-disable; + }; + }; + gpio_keys_pins: gpio-keys-pins { pins { pinmux = <PINMUX_GPIO106__FUNC_GPIO106>;@@ -434,6 +500,28 @@ &xhci0 { status = "okay"; }; +ð { + phy-mode ="rgmii-rxid"; + phy-handle = <ðernet_phy0>; + snps,reset-gpio = <&pio 93 GPIO_ACTIVE_HIGH>; + snps,reset-delays-us = <0 10000 10000>; + mediatek,tx-delay-ps = <2030>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <ð_default_pins>; + pinctrl-1 = <ð_sleep_pins>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + ethernet_phy0: ethernet-phy@1 { + compatible = "ethernet-phy-id001c.c916"; + reg = <0x1>; + }; + }; +}; + &xhci1 { vusb33-supply = <&mt6359_vusb_ldo_reg>; status = "okay";arch/arm64/boot/dts/mediatek/mt8195.dtsi +79
-0@@ -1042,6 +1042,92 @@ spis1: spi@1101e000 { status = "disabled"; }; + eth: ethernet@11021000 { + compatible = "mediatek,mt8195-gmac", "snps,dwmac-5.10a"; + reg = <0 0x11021000 0 0x4000>; + interrupts = <GIC_SPI 716 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "macirq"; + clock-names = "axi", + "apb", + "mac_cg", + "mac_main", + "ptp_ref", + "rmii_internal"; + clocks = <&pericfg_ao CLK_PERI_AO_ETHERNET>, + <&pericfg_ao CLK_PERI_AO_ETHERNET_BUS>, + <&pericfg_ao CLK_PERI_AO_ETHERNET_MAC>, + <&topckgen CLK_TOP_SNPS_ETH_250M>, + <&topckgen CLK_TOP_SNPS_ETH_62P4M_PTP>, + <&topckgen CLK_TOP_SNPS_ETH_50M_RMII>; + assigned-clocks = <&topckgen CLK_TOP_SNPS_ETH_250M>, + <&topckgen CLK_TOP_SNPS_ETH_62P4M_PTP>, + <&topckgen CLK_TOP_SNPS_ETH_50M_RMII>; + assigned-clock-parents = <&topckgen CLK_TOP_ETHPLL_D2>, + <&topckgen CLK_TOP_ETHPLL_D8>, + <&topckgen CLK_TOP_ETHPLL_D10>; + power-domains = <&spm MT8195_POWER_DOMAIN_ETHER>; + mediatek,pericfg = <&infracfg_ao>; + snps,axi-config = <&stmmac_axi_setup>; + snps,mtl-rx-config = <&mtl_rx_setup>; + snps,mtl-tx-config = <&mtl_tx_setup>; + snps,txpbl = <16>; + snps,rxpbl = <16>; + snps,clk-csr = <0>; + status = "disabled"; + + stmmac_axi_setup: stmmac-axi-config { + snps,wr_osr_lmt = <0x7>; + snps,rd_osr_lmt = <0x7>; + snps,blen = <0 0 0 0 16 8 4>; + }; + + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <4>; + snps,rx-sched-sp; + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + }; + queue1 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + }; + queue2 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + }; + queue3 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + }; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <4>; + snps,tx-sched-wrr; + queue0 { + snps,weight = <0x10>; + snps,dcb-algorithm; + snps,priority = <0x0>; + }; + queue1 { + snps,weight = <0x11>; + snps,dcb-algorithm; + snps,priority = <0x1>; + }; + queue2 { + snps,weight = <0x12>; + snps,dcb-algorithm; + snps,priority = <0x2>; + }; + queue3 {
arch/arm64/boot/dts/mediatek/mt8195.dtsi spis1: spi@1101e000 { · line 1133
Quoted 10 lines
arch/arm64/boot/dts/mediatek/mt8195.dtsi +7
-0+ snps,weight = <0x13>; + snps,dcb-algorithm; + snps,priority = <0x3>; + }; + }; + }; + xhci0: usb@11200000 { compatible = "mediatek,mt8195-xhci", "mediatek,mtk-xhci";
Regards,
Macpaul Lin