bpftool: Add LLVM as default library for disassembling JIT-ed programs
v3 cover bpftool: Add LLVM as default library for disassembling JIT-ed programs
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
To disassemble instructions for JIT-ed programs, bpftool has relied on the libbfd library. This has been problematic in the past: libbfd's interface is not meant to be stable and has changed several times, hence the detection of the two related features from the Makefile (disassembler-four-args and disassembler-init-styled). When it comes to shipping bpftool, this has also caused issues with several distribution maintainers unwilling to support the feature (for example, Debian's page for binutils-dev, libbfd's package, says: "Note that building Debian packages which depend on the shared libbfd is Not Allowed.").
This patchset adds support for LLVM as the primary library for disassembling instructions for JIT-ed programs.
We keep libbfd as a fallback. One reason for this is that currently it works well, we have all we need in terms of features detection in the Makefile, so it provides a fallback for disassembling JIT-ed programs if libbfd is installed but LLVM is not. The other reason is that libbfd supports nfp instruction for Netronome's SmartNICs and can be used to disassemble offloaded programs, something that LLVM cannot do (Niklas confirmed that the feature is still in use). However, if libbfd's interface breaks again in the future, we might reconsider keeping support for it.
v3:
- Extend commit description (patch 6) with notes on llvm-dev and LLVM's disassembler stability.
v2:
- Pass callback when creating the LLVM disassembler, so that the branch targets are printed as addresses (instead of byte offsets).
- Add last commit to "support" other arch with LLVM, although we don't know any supported triple yet.
- Use $(LLVM_CONFIG) instead of llvm-config in Makefile.
- Pass components to llvm-config --libs to limit the number of libraries to pass on the command line, in Makefile.
- Rebase split of FEATURE_TESTS and FEATURE_DISPLAY in Makefile.
Quentin Monnet (8):
bpftool: Define _GNU_SOURCE only once
bpftool: Remove asserts from JIT disassembler
bpftool: Split FEATURE_TESTS/FEATURE_DISPLAY definitions in Makefile
bpftool: Group libbfd defs in Makefile, only pass them if we use
libbfd
bpftool: Refactor disassembler for JIT-ed programs
bpftool: Add LLVM as default library for disassembling JIT-ed programs
bpftool: Support setting alternative arch for JIT disasm with LLVM
bpftool: Add llvm feature to "bpftool version"
.../bpftool/Documentation/common_options.rst | 8 +- tools/bpf/bpftool/Makefile | 72 +++-- tools/bpf/bpftool/common.c | 12 +- tools/bpf/bpftool/iter.c | 2 + tools/bpf/bpftool/jit_disasm.c | 261 +++++++++++++++--- tools/bpf/bpftool/main.c | 10 + tools/bpf/bpftool/main.h | 32 +-- tools/bpf/bpftool/map.c | 1 - tools/bpf/bpftool/net.c | 2 + tools/bpf/bpftool/perf.c | 2 + tools/bpf/bpftool/prog.c | 23 +- tools/bpf/bpftool/xlated_dumper.c | 2 + 12 files changed, 322 insertions(+), 105 deletions(-)
Signature · 1 line
2.34.1
PATCH v3 1/8 bpftool: Define _GNU_SOURCE only once
_GNU_SOURCE is defined in several source files for bpftool, but only one of them takes the precaution of checking whether the value is already defined. Add #ifndef for other occurrences too.
This is in preparation for the support of disassembling JIT-ed programs with LLVM, with $(llvm-config --cflags) passing -D_GNU_SOURCE as a compilation argument.
--- tools/bpf/bpftool/common.c | 2 ++ tools/bpf/bpftool/iter.c | 2 ++ tools/bpf/bpftool/jit_disasm.c | 2 ++ tools/bpf/bpftool/net.c | 2 ++ tools/bpf/bpftool/perf.c | 2 ++ tools/bpf/bpftool/prog.c | 2 ++ tools/bpf/bpftool/xlated_dumper.c | 2 ++ 7 files changed, 14 insertions(+)
tools/bpf/bpftool/common.c +2 -0
@@ -1,7 +1,9 @@// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) /* Copyright (C) 2017-2018 Netronome Systems, Inc. */ +#ifndef _GNU_SOURCE#define _GNU_SOURCE +#endif #include <ctype.h> #include <errno.h> #include <fcntl.h>
tools/bpf/bpftool/iter.c +2 -0
@@ -1,7 +1,9 @@// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) // Copyright (C) 2020 Facebook +#ifndef _GNU_SOURCE#define _GNU_SOURCE +#endif #include <unistd.h> #include <linux/err.h> #include <bpf/libbpf.h>
tools/bpf/bpftool/jit_disasm.c +2 -0
@@ -11,7 +11,9 @@* Licensed under the GNU General Public License, version 2.0 (GPLv2) */ +#ifndef _GNU_SOURCE#define _GNU_SOURCE +#endif #include <stdio.h> #include <stdarg.h> #include <stdint.h>
tools/bpf/bpftool/net.c +2 -0
@@ -1,7 +1,9 @@// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) // Copyright (C) 2018 Facebook +#ifndef _GNU_SOURCE#define _GNU_SOURCE +#endif #include <errno.h> #include <fcntl.h> #include <stdlib.h>
tools/bpf/bpftool/perf.c +2 -0
@@ -2,7 +2,9 @@// Copyright (C) 2018 Facebook // Author: Yonghong Song <[email protected]> +#ifndef _GNU_SOURCE#define _GNU_SOURCE +#endif #include <ctype.h> #include <errno.h> #include <fcntl.h>
tools/bpf/bpftool/prog.c +2 -0
@@ -1,7 +1,9 @@// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) /* Copyright (C) 2017-2018 Netronome Systems, Inc. */ +#ifndef _GNU_SOURCE#define _GNU_SOURCE +#endif #include <errno.h> #include <fcntl.h> #include <signal.h>
tools/bpf/bpftool/xlated_dumper.c +2 -0
@@ -1,7 +1,9 @@// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) /* Copyright (C) 2018 Netronome Systems, Inc. */ +#ifndef _GNU_SOURCE#define _GNU_SOURCE +#endif #include <stdarg.h> #include <stdio.h> #include <stdlib.h>
Signature · 1 line
2.34.1
PATCH v3 2/8 bpftool: Remove asserts from JIT disassembler
In reply to Quentin MonnetThe JIT disassembler in bpftool is the only components (with the JSON writer) using asserts to check the return values of functions. But it does not do so in a consistent way, and diasm_print_insn() returns no value, although sometimes the operation failed.
Remove the asserts, and instead check the return values, print messages on errors, and propagate the error to the caller from prog.c.
Remove the inclusion of assert.h from jit_disasm.c, and also from map.c where it is unused.
--- tools/bpf/bpftool/jit_disasm.c | 51 +++++++++++++++++++++++----------- tools/bpf/bpftool/main.h | 25 +++++++++-------- tools/bpf/bpftool/map.c | 1 - tools/bpf/bpftool/prog.c | 15 ++++++---- 4 files changed, 57 insertions(+), 35 deletions(-)
tools/bpf/bpftool/jit_disasm.c +35 -16
@@ -18,7 +18,6 @@#include <stdarg.h> #include <stdint.h> #include <stdlib.h> -#include <assert.h> #include <unistd.h> #include <string.h> #include <bfd.h>
@@ -31,14 +30,18 @@#include "json_writer.h" #include "main.h" -static void get_exec_path (char *tpath,size_t size) +static int get_exec_path (char *tpath,size_t size) {const char *path ="/proc/self/exe" ;ssize_t len; len =readlink (path, tpath, size -1 ); -assert (len >0 ); +if (len <=0 ) +return -1 ; + tpath[len] =0 ; + +return 0 ; }static int oper_count;
@@ -99,30 +102,39 @@ static int fprintf_json_styled(void *out,return r; } -void disasm_print_insn (unsigned char *image,ssize_t len,int opcodes, -const char *arch,const char *disassembler_options, -const struct btf *btf, -const struct bpf_prog_linfo *prog_linfo, -__u64 func_ksym,unsigned int func_idx, -bool linum) +int disasm_print_insn (unsigned char *image,ssize_t len,int opcodes, +const char *arch,const char *disassembler_options, +const struct btf *btf, +const struct bpf_prog_linfo *prog_linfo, +__u64 func_ksym,unsigned int func_idx, +bool linum) {const struct bpf_line_info *linfo =NULL ;disassembler_ftype disassemble; +int count, i, pc =0 , err =-1 ;struct disassemble_info info;unsigned int nr_skip =0 ; -int count, i, pc =0 ;char tpath[PATH_MAX ];bfd *bfdf;if (!len) -return ; +return -1 ;memset (tpath,0 ,sizeof (tpath)); -get_exec_path (tpath,sizeof (tpath)); +if (get_exec_path (tpath,sizeof (tpath))) { +p_err ("failed to create disasembler (get_exec_path)" ); +return -1 ; + } bfdf =bfd_openr (tpath,NULL ); -assert (bfdf); -assert (bfd_check_format (bfdf, bfd_object)); +if (!bfdf) { +p_err ("failed to create disassembler (bfd_openr)" ); +return -1 ; + } +if (!bfd_check_format (bfdf, bfd_object)) { +p_err ("failed to create disassembler (bfd_check_format)" ); + goto exit_close; + }if (json_output) init_disassemble_info_compat(&info, stdout,
@@ -141,7 +153,7 @@ void disasm_print_insn(unsigned char *image, ssize_t len, int opcodes, bfdf->arch_info = inf; }else {p_err ("No libbfd support for %s" , arch); -return ; + goto exit_close; } }
@@ -162,7 +174,10 @@ void disasm_print_insn(unsigned char *image, ssize_t len, int opcodes,#else disassemble =disassembler (bfdf);#endif -assert (disassemble); +if (!disassemble) { +p_err ("failed to create disassembler" ); + goto exit_close; + }if (json_output)jsonw_start_array (json_wtr);
@@ -226,7 +241,11 @@ void disasm_print_insn(unsigned char *image, ssize_t len, int opcodes,if (json_output)jsonw_end_array (json_wtr); + err =0 ; + +exit_close:bfd_close (bfdf); +return err; }int disasm_init (void )
tools/bpf/bpftool/main.h +13 -12
@@ -173,22 +173,23 @@ int map_parse_fd_and_info(int *argc, char ***argv, void *info, __u32 *info_len);struct bpf_prog_linfo ;#ifdef HAVE_LIBBFD_SUPPORT -void disasm_print_insn (unsigned char *image,ssize_t len,int opcodes, -const char *arch,const char *disassembler_options, -const struct btf *btf, -const struct bpf_prog_linfo *prog_linfo, -__u64 func_ksym,unsigned int func_idx, -bool linum); +int disasm_print_insn (unsigned char *image,ssize_t len,int opcodes, +const char *arch,const char *disassembler_options, +const struct btf *btf, +const struct bpf_prog_linfo *prog_linfo, +__u64 func_ksym,unsigned int func_idx, +bool linum);int disasm_init (void );#else static inline -void disasm_print_insn (unsigned char *image,ssize_t len,int opcodes, -const char *arch,const char *disassembler_options, -const struct btf *btf, -const struct bpf_prog_linfo *prog_linfo, -__u64 func_ksym,unsigned int func_idx, -bool linum) +int disasm_print_insn (unsigned char *image,ssize_t len,int opcodes, +const char *arch,const char *disassembler_options, +const struct btf *btf, +const struct bpf_prog_linfo *prog_linfo, +__u64 func_ksym,unsigned int func_idx, +bool linum) { +return 0 ; }static inline int disasm_init (void ) {
tools/bpf/bpftool/map.c +0 -1
@@ -1,7 +1,6 @@// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) /* Copyright (C) 2017-2018 Netronome Systems, Inc. */ -#include <assert.h> #include <errno.h> #include <fcntl.h> #include <linux/err.h>
tools/bpf/bpftool/prog.c +9 -6
@@ -822,10 +822,11 @@ prog_dump(struct bpf_prog_info *info, enum dump_mode mode,printf ("%s:\n" , sym_name); } -disasm_print_insn (img, lens[i], opcodes, - name, disasm_opt, btf, - prog_linfo, ksyms[i], i, - linum); +if (disasm_print_insn (img, lens[i], opcodes, + name, disasm_opt, btf, + prog_linfo, ksyms[i], i, + linum)) + goto exit_free; img += lens[i];
@@ -838,8 +839,10 @@ prog_dump(struct bpf_prog_info *info, enum dump_mode mode,if (json_output)jsonw_end_array (json_wtr); }else { -disasm_print_insn (buf, member_len, opcodes, name, - disasm_opt, btf,NULL ,0 ,0 , false); +if (disasm_print_insn (buf, member_len, opcodes, name, + disasm_opt, btf,NULL ,0 ,0 , + false)) + goto exit_free; } }else if (visual) {if (json_output)
Signature · 1 line
2.34.1
PATCH v3 3/8 bpftool: Split FEATURE_TESTS/FEATURE_DISPLAY definitions in Makefile
In reply to Quentin MonnetMake FEATURE_TESTS and FEATURE_DISPLAY easier to read and less likely to be subject to conflicts on updates by having one feature per line.
--- tools/bpf/bpftool/Makefile | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-)
tools/bpf/bpftool/Makefile +14 -5
@@ -93,11 +93,20 @@ INSTALL ?= install RM ?= rm -f FEATURE_USER = .bpftool -FEATURE_TESTS = libbfd libbfd-liberty libbfd-liberty-z \ - disassembler-four-args disassembler-init-styled libcap \ - clang-bpf-co-re -FEATURE_DISPLAY = libbfd libbfd-liberty libbfd-liberty-z \ - libcap clang-bpf-co-re + +FEATURE_TESTS := clang-bpf-co-re +FEATURE_TESTS += libcap +FEATURE_TESTS += libbfd +FEATURE_TESTS += libbfd-liberty +FEATURE_TESTS += libbfd-liberty-z +FEATURE_TESTS += disassembler-four-args +FEATURE_TESTS += disassembler-init-styled + +FEATURE_DISPLAY := clang-bpf-co-re +FEATURE_DISPLAY += libcap +FEATURE_DISPLAY += libbfd +FEATURE_DISPLAY += libbfd-liberty +FEATURE_DISPLAY += libbfd-liberty-z check_feat := 1 NON_CHECK_FEAT_TARGETS := clean uninstall doc doc-clean doc-install doc-uninstall
Signature · 1 line
2.34.1
PATCH v3 4/8 bpftool: Group libbfd defs in Makefile, only pass them if we use libbfd
In reply to Quentin MonnetBpftool uses libbfd for disassembling JIT-ed programs. But the feature is optional, and the tool can be compiled without libbfd support. The Makefile sets the relevant variables accordingly. It also sets variables related to libbfd's interface, given that it has changed over time.
Group all those libbfd-related definitions so that it's easier to understand what we are testing for, and only use variables related to libbfd's interface if we need libbfd in the first place.
In addition to make the Makefile clearer, grouping the definitions related to disassembling JIT-ed programs will help support alternatives to libbfd.
--- tools/bpf/bpftool/Makefile | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-)
tools/bpf/bpftool/Makefile +15 -12
@@ -124,13 +124,6 @@ include $(FEATURES_DUMP) endif endif -ifeq ($(feature-disassembler-four-args), 1) -CFLAGS += -DDISASM_FOUR_ARGS_SIGNATURE -endif -ifeq ($(feature-disassembler-init-styled), 1) - CFLAGS += -DDISASM_INIT_STYLED -endif - LIBS = $(LIBBPF) -lelf -lz LIBS_BOOTSTRAP = $(LIBBPF_BOOTSTRAP) -lelf -lz ifeq ($(feature-libcap), 1)
@@ -142,9 +135,7 @@ include $(wildcard $(OUTPUT)*.d) all: $(OUTPUT)bpftool -BFD_SRCS = jit_disasm.c - -SRCS = $(filter-out $(BFD_SRCS),$(wildcard *.c)) +SRCS := $(wildcard *.c) ifeq ($(feature-libbfd),1) LIBS += -lbfd -ldl -lopcodes
@@ -154,9 +145,21 @@ else ifeq ($(feature-libbfd-liberty-z),1) LIBS += -lbfd -ldl -lopcodes -liberty -lz endif +# If one of the above feature combinations is set, we support libbfd ifneq ($(filter -lbfd,$(LIBS)),) -CFLAGS += -DHAVE_LIBBFD_SUPPORT -SRCS += $(BFD_SRCS) + CFLAGS += -DHAVE_LIBBFD_SUPPORT + + # Libbfd interface changed over time, figure out what we need + ifeq ($(feature-disassembler-four-args), 1) + CFLAGS += -DDISASM_FOUR_ARGS_SIGNATURE + endif + ifeq ($(feature-disassembler-init-styled), 1) + CFLAGS += -DDISASM_INIT_STYLED + endif +endif +ifeq ($(filter -DHAVE_LIBBFD_SUPPORT,$(CFLAGS)),) + # No support for JIT disassembly + SRCS := $(filter-out jit_disasm.c,$(SRCS)) endif HOST_CFLAGS = $(subst -I$(LIBBPF_INCLUDE),-I$(LIBBPF_BOOTSTRAP_INCLUDE),\
Signature · 1 line
2.34.1
PATCH v3 5/8 bpftool: Refactor disassembler for JIT-ed programs
In reply to Quentin MonnetRefactor disasm_print_insn() to extract the code specific to libbfd and move it to dedicated functions. There is no functional change. This is in preparation for supporting an alternative library for disassembling the instructions.
--- tools/bpf/bpftool/jit_disasm.c | 133 ++++++++++++++++++++++----------- 1 file changed, 88 insertions(+), 45 deletions(-)
tools/bpf/bpftool/jit_disasm.c +88 -45
@@ -30,6 +30,14 @@#include "json_writer.h" #include "main.h" +static int oper_count; + +typedef struct { +struct disassemble_info *info; +disassembler_ftype disassemble; +bfd *bfdf; +}disasm_ctx_t ; +static int get_exec_path (char *tpath,size_t size) {const char *path ="/proc/self/exe" ;
@@ -44,7 +52,6 @@ static int get_exec_path(char *tpath, size_t size)return 0 ; } -static int oper_count;static int printf_json (void *out,const char *fmt,va_list ap) {char *s;
@@ -102,46 +109,44 @@ static int fprintf_json_styled(void *out,return r; } -int disasm_print_insn (unsigned char *image,ssize_t len,int opcodes, -const char *arch,const char *disassembler_options, -const struct btf *btf, -const struct bpf_prog_linfo *prog_linfo, -__u64 func_ksym,unsigned int func_idx, -bool linum) +static int init_context (disasm_ctx_t *ctx,const char *arch, +const char *disassembler_options, +unsigned char *image,ssize_t len) { -const struct bpf_line_info *linfo =NULL ; -disassembler_ftype disassemble; -int count, i, pc =0 , err =-1 ; -struct disassemble_info info; -unsigned int nr_skip =0 ; +struct disassemble_info *info;char tpath[PATH_MAX ];bfd *bfdf; -if (!len) -return -1 ; -memset (tpath,0 ,sizeof (tpath));if (get_exec_path (tpath,sizeof (tpath))) {p_err ("failed to create disasembler (get_exec_path)" );return -1 ; } - bfdf =bfd_openr (tpath,NULL ); -if (!bfdf) { + ctx->bfdf =bfd_openr (tpath,NULL ); +if (!ctx->bfdf) {p_err ("failed to create disassembler (bfd_openr)" );return -1 ; } -if (!bfd_check_format (bfdf, bfd_object)) { +if (!bfd_check_format (ctx->bfdf, bfd_object)) {p_err ("failed to create disassembler (bfd_check_format)" ); - goto exit_close; + goto err_close; } + bfdf = ctx->bfdf; + + ctx->info =malloc (sizeof (struct disassemble_info )); +if (!ctx->info) { +p_err ("mem alloc failed" ); + goto err_close; + } + info = ctx->info;if (json_output) -init_disassemble_info_compat (&info, stdout, +init_disassemble_info_compat (info, stdout, (fprintf_ftype ) fprintf_json, fprintf_json_styled);else -init_disassemble_info_compat (&info, stdout, +init_disassemble_info_compat (info, stdout, (fprintf_ftype ) fprintf, fprintf_styled);
@@ -153,31 +158,76 @@ int disasm_print_insn(unsigned char *image, ssize_t len, int opcodes, bfdf->arch_info = inf; }else {p_err ("No libbfd support for %s" , arch); - goto exit_close; + goto err_free; } } - info.arch =bfd_get_arch (bfdf); - info.mach =bfd_get_mach (bfdf); + info->arch =bfd_get_arch (bfdf); + info->mach =bfd_get_mach (bfdf);if (disassembler_options) - info.disassembler_options = disassembler_options; - info.buffer = image; - info.buffer_length = len; + info->disassembler_options = disassembler_options; + info->buffer = image; + info->buffer_length = len; -disassemble_init_for_target (&info); +disassemble_init_for_target (info);#ifdef DISASM_FOUR_ARGS_SIGNATURE - disassemble =disassembler (info.arch, -bfd_big_endian (bfdf), - info.mach, - bfdf); + ctx->disassemble =disassembler (info->arch, +bfd_big_endian (bfdf), + info->mach, + bfdf);#else - disassemble =disassembler (bfdf); + ctx->disassemble =disassembler (bfdf);#endif -if (!disassemble) { +if (!ctx->disassemble) {p_err ("failed to create disassembler" ); - goto exit_close; + goto err_free; } +return 0 ; + +err_free: +free (info); +err_close: +bfd_close (ctx->bfdf); +return -1 ; +} + +static void destroy_context (disasm_ctx_t *ctx) +{ +free (ctx->info); +bfd_close (ctx->bfdf); +} + +static int +disassemble_insn (disasm_ctx_t *ctx,__maybe_unused unsigned char *image, +__maybe_unused ssize_t len,int pc) +{ +return ctx->disassemble (pc, ctx->info); +} + +int disasm_init (void ) +{ +bfd_init (); +return 0 ; +} + +int disasm_print_insn (unsigned char *image,ssize_t len,int opcodes, +const char *arch,const char *disassembler_options, +const struct btf *btf, +const struct bpf_prog_linfo *prog_linfo, +__u64 func_ksym,unsigned int func_idx, +bool linum) +{ +const struct bpf_line_info *linfo =NULL ; +unsigned int nr_skip =0 ; +int count, i, pc =0 ; +disasm_ctx_t ctx; + +if (!len) +return -1 ; + +if (init_context (&ctx, arch, disassembler_options, image, len)) +return -1 ;if (json_output)jsonw_start_array (json_wtr);
@@ -205,7 +255,8 @@ int disasm_print_insn(unsigned char *image, ssize_t len, int opcodes,printf ("%4x:\t" , pc); } - count =disassemble (pc, &info); + count =disassemble_insn (&ctx, image, len, pc); +if (json_output) {/* Operand array, was started in fprintf_json. Before * that, make sure we have a _null_ value if no operand
@@ -241,15 +292,7 @@ int disasm_print_insn(unsigned char *image, ssize_t len, int opcodes,if (json_output)jsonw_end_array (json_wtr); - err =0 ; +destroy_context (&ctx); -exit_close: -bfd_close (bfdf); -return err; -} - -int disasm_init (void ) -{ -bfd_init ();return 0 ; }
Signature · 1 line
2.34.1
PATCH v3 6/8 bpftool: Add LLVM as default library for disassembling JIT-ed programs
In reply to Quentin MonnetTo disassemble instructions for JIT-ed programs, bpftool has relied on the libbfd library. This has been problematic in the past: libbfd's interface is not meant to be stable and has changed several times. For building bpftool, we have to detect how the libbfd version on the system behaves, which is why we have to handle features disassembler-four-args and disassembler-init-styled in the Makefile. When it comes to shipping bpftool, this has also caused issues with several distribution maintainers unwilling to support the feature (see for example Debian's page for binutils-dev, which ships libbfd: "Note that building Debian packages which depend on the shared libbfd is Not Allowed." [0]).
For these reasons, we add support for LLVM as an alternative to libbfd for disassembling instructions of JIT-ed programs. Thanks to the preparation work in the previous commits, it's easy to add the library by passing the relevant compilation options in the Makefile, and by adding the functions for setting up the LLVM disassembler in file jit_disasm.c.
The LLVM disassembler requires the LLVM development package (usually llvm-dev or llvm-devel).
The expectation is that the interface for this disassembler will be more stable. There is a note in LLVM's Developer Policy [1] stating that the stability for the C API is "best effort" and not guaranteed, but at least there is some effort to keep compatibility when possible (which hasn't really been the case for libbfd so far). Furthermore, the Debian page for the related LLVM package does not caution against linking to the lib, as binutils-dev page does.
Naturally, the display of disassembled instructions comes with a few minor differences. Here is a sample output with libbfd (already supported before this patch):
# bpftool prog dump jited id 56
bpf_prog_6deef7357e7b4530:
0: nopl 0x0(%rax,%rax,1)
5: xchg %ax,%ax
7: push %rbp
8: mov %rsp,%rbp
b: push %rbx
c: push %r13
e: push %r14
10: mov %rdi,%rbx
13: movzwq 0xb4(%rbx),%r13
1b: xor %r14d,%r14d
1e: or $0x2,%r14d
22: mov $0x1,%eax
27: cmp $0x2,%r14
2b: jne 0x000000000000002f
2d: xor %eax,%eax
2f: pop %r14
31: pop %r13
33: pop %rbx
34: leave
35: retLLVM supports several variants that we could set when initialising the disassembler, for example with:
LLVMSetDisasmOptions(*ctx,
LLVMDisassembler_Option_AsmPrinterVariant);but the default printer is used for now. Here is the output with LLVM:
# bpftool prog dump jited id 56
bpf_prog_6deef7357e7b4530:
0: nopl (%rax,%rax)
5: nop
7: pushq %rbp
8: movq %rsp, %rbp
b: pushq %rbx
c: pushq %r13
e: pushq %r14
10: movq %rdi, %rbx
13: movzwq 180(%rbx), %r13
1b: xorl %r14d, %r14d
1e: orl $2, %r14d
22: movl $1, %eax
27: cmpq $2, %r14
2b: jne 0x2f
2d: xorl %eax, %eax
2f: popq %r14
31: popq %r13
33: popq %rbx
34: leave
35: retqThe LLVM disassembler comes as the default choice, with libbfd as a fall-back.
Of course, we could replace libbfd entirely and avoid supporting two different libraries. One reason for keeping libbfd is that, right now, it works well, we have all we need in terms of features detection in the Makefile, so it provides a fallback for disassembling JIT-ed programs if libbfd is installed but LLVM is not. The other motivation is that libbfd supports nfp instruction for Netronome's SmartNICs and can be used to disassemble offloaded programs, something that LLVM cannot do. If libbfd's interface breaks again in the future, we might reconsider keeping support for it.
[0] https://packages.debian.org/buster/binutils-dev
[1] https://llvm.org/docs/DeveloperPolicy.html#c-api-changes
--- tools/bpf/bpftool/Makefile | 46 +++++++++----- tools/bpf/bpftool/jit_disasm.c | 112 ++++++++++++++++++++++++++++++++- tools/bpf/bpftool/main.h | 4 +- 3 files changed, 140 insertions(+), 22 deletions(-)
tools/bpf/bpftool/Makefile +29 -17
@@ -95,6 +95,7 @@ RM ?= rm -f FEATURE_USER = .bpftool FEATURE_TESTS := clang-bpf-co-re +FEATURE_TESTS += llvm FEATURE_TESTS += libcap FEATURE_TESTS += libbfd FEATURE_TESTS += libbfd-liberty
@@ -103,6 +104,7 @@ FEATURE_TESTS += disassembler-four-args FEATURE_TESTS += disassembler-init-styled FEATURE_DISPLAY := clang-bpf-co-re +FEATURE_DISPLAY += llvm FEATURE_DISPLAY += libcap FEATURE_DISPLAY += libbfd FEATURE_DISPLAY += libbfd-liberty
@@ -137,27 +139,37 @@ all: $(OUTPUT)bpftool SRCS := $(wildcard *.c) -ifeq ($(feature-libbfd),1) - LIBS += -lbfd -ldl -lopcodes -else ifeq ($(feature-libbfd-liberty),1) - LIBS += -lbfd -ldl -lopcodes -liberty -else ifeq ($(feature-libbfd-liberty-z),1) - LIBS += -lbfd -ldl -lopcodes -liberty -lz -endif +ifeq ($(feature-llvm),1) + # If LLVM is available, use it for JIT disassembly + CFLAGS += -DHAVE_LLVM_SUPPORT + LLVM_CONFIG_LIB_COMPONENTS := mcdisassembler all-targets + CFLAGS += $(shell $(LLVM_CONFIG) --cflags --libs $(LLVM_CONFIG_LIB_COMPONENTS)) + LIBS += $(shell $(LLVM_CONFIG) --libs $(LLVM_CONFIG_LIB_COMPONENTS)) + LDFLAGS += $(shell $(LLVM_CONFIG) --ldflags) +else + # Fall back on libbfd + ifeq ($(feature-libbfd),1) + LIBS += -lbfd -ldl -lopcodes + else ifeq ($(feature-libbfd-liberty),1) + LIBS += -lbfd -ldl -lopcodes -liberty + else ifeq ($(feature-libbfd-liberty-z),1) + LIBS += -lbfd -ldl -lopcodes -liberty -lz + endif -# If one of the above feature combinations is set, we support libbfd -ifneq ($(filter -lbfd,$(LIBS)),) - CFLAGS += -DHAVE_LIBBFD_SUPPORT + # If one of the above feature combinations is set, we support libbfd + ifneq ($(filter -lbfd,$(LIBS)),) + CFLAGS += -DHAVE_LIBBFD_SUPPORT - # Libbfd interface changed over time, figure out what we need - ifeq ($(feature-disassembler-four-args), 1) - CFLAGS += -DDISASM_FOUR_ARGS_SIGNATURE - endif - ifeq ($(feature-disassembler-init-styled), 1) - CFLAGS += -DDISASM_INIT_STYLED + # Libbfd interface changed over time, figure out what we need + ifeq ($(feature-disassembler-four-args), 1) + CFLAGS += -DDISASM_FOUR_ARGS_SIGNATURE + endif + ifeq ($(feature-disassembler-init-styled), 1) + CFLAGS += -DDISASM_INIT_STYLED + endif endif endif -ifeq ($(filter -DHAVE_LIBBFD_SUPPORT,$(CFLAGS)),) +ifeq ($(filter -DHAVE_LLVM_SUPPORT -DHAVE_LIBBFD_SUPPORT,$(CFLAGS)),) # No support for JIT disassembly SRCS := $(filter-out jit_disasm.c,$(SRCS)) endif
tools/bpf/bpftool/jit_disasm.c +109 -3
140 lines not on this page · raw message
tools/bpf/bpftool/main.h +2 -2
@@ -172,7 +172,7 @@ int map_parse_fds(int *argc, char ***argv, int **fds);int map_parse_fd_and_info (int *argc,char ***argv,void *info,__u32 *info_len);struct bpf_prog_linfo ; -#ifdef HAVE_LIBBFD_SUPPORT +#if defined(HAVE_LLVM_SUPPORT ) || defined(HAVE_LIBBFD_SUPPORT ) int disasm_print_insn(unsigned char *image, ssize_t len, int opcodes, const char *arch, const char *disassembler_options, const struct btf *btf,
@@ -193,7 +193,7 @@ int disasm_print_insn(unsigned char *image, ssize_t len, int opcodes, }static inline int disasm_init (void ) { -p_err ("No libbfd support" ); +p_err ("No JIT disassembly support" );return -1 ; }#endif
Signature · 1 line
2.34.1
Quoted 5 lines · Quentin Monnet
tools/bpf/bpftool/jit_disasm.c +4
-0+ +/* This callback to set the ref_type is necessary to have the LLVM disassembler +* print PC-relative addresses instead of byte offsets for branch instruction +* targets.
tools/bpf/bpftool/jit_disasm.c line 78
Quoted 10 lines
tools/bpf/bpftool/jit_disasm.c +10
-0+*/ +static const char * +symbol_lookup_callback (__maybe_unused void *disasm_info, +__maybe_unused uint64_t ref_value, +uint64_t *ref_type,__maybe_unused uint64_t ref_PC, +__maybe_unused const char **ref_name) +{ + *ref_type = LLVMDisassembler_ReferenceType_InOut_None; +return NULL ; +}
Could you give an example before/after for asm
that contains 'call foo' instructions?
I'm not sure that above InOut_None will not break
symbolization.
2022-10-20 10:49 UTC-0700 ~ Alexei Starovoitov
<[email protected]>
Quoted 13 lines · Quentin Monnet
Quoted 12 lines
tools/bpf/bpftool/jit_disasm.c +11
-0+ +/* This callback to set the ref_type is necessary to have the LLVM disassembler +* print PC-relative addresses instead of byte offsets for branch instruction +* targets. +*/ +static const char * +symbol_lookup_callback (__maybe_unused void *disasm_info, +__maybe_unused uint64_t ref_value, +uint64_t *ref_type,__maybe_unused uint64_t ref_PC, +__maybe_unused const char **ref_name) +{
Quoted 8 lines
tools/bpf/bpftool/jit_disasm.c line 78
Quoted 3 lines
tools/bpf/bpftool/jit_disasm.c +3
-0+ *ref_type = LLVMDisassembler_ReferenceType_InOut_None; +return NULL ; +}Could you give an example before/after for asm
that contains 'call foo' instructions?
I'm not sure that aboveInOut_Nonewill not break
symbolization.
Hi Alexei, I ran a quick test and it doesn't seem we lose any information. Building from:
#include <linux/bpf.h>
#include "bpf_helper_defs.h"
#define SEC(name) __attribute__((section(name), used))
static __attribute__((noinline))
int bar(int b) {
return bpf_get_prandom_u32() > b;
}
SEC("xdp")
int foo(struct xdp_md *ctx) {
void *data = (void *)(long)ctx->data;
void *data_end = (void *)(long)ctx->data_end;
return bar(data_end - data);
}Here is the output from the existing version (using libbfd):
# bpftool version bpftool v7.1.0 using libbpf v1.1 features: libbfd, libbpf_strict, skeletons
# bpftool prog dump jited name foo int foo(struct xdp_md * ctx): bpf_prog_65e359e7b0251046_foo: ; void *data = (void *)(long)ctx->data; 0: nopl 0x0(%rax,%rax,1) 5: xchg %ax,%ax 7: push %rbp 8: mov %rsp,%rbp b: mov 0x0(%rdi),%rsi ; void *data_end = (void *)(long)ctx->data_end; f: mov 0x8(%rdi),%rdi ; return bar(data_end - data); 13: sub %esi,%edi ; return bar(data_end - data); 15: call 0x0000000000000038 ; return bar(data_end - data); 1a: leave 1b: ret
int bar(int b):
bpf_prog_9b001d67a67f01cc_bar:
; int bar(int b) {
0: nopl 0x0(%rax,%rax,1)
5: xchg %ax,%ax
7: push %rbp
8: mov %rsp,%rbp
b: push %rbx
c: mov %edi,%ebx
; return bpf_get_prandom_u32() > b;
e: call 0xffffffffcab00454
13: mov %eax,%edi
15: mov $0x1,%eax
; return bpf_get_prandom_u32() > b;
1a: cmp %ebx,%edi
1c: ja 0x0000000000000020
1e: xor %eax,%eax
; return bpf_get_prandom_u32() > b;
20: pop %rbx
21: leave
22: retDid you expect "bar" to appear on insn '15:'? I don't think we get this from bpftool at the moment? Or did I misunderstand your question?
The output from LLVM's disassembler comes below:
# ./bpftool version bpftool v7.1.0 using libbpf v1.1 features: llvm, libbpf_strict, skeletons
# ./bpftool prog dump jited name foo int foo(struct xdp_md * ctx): bpf_prog_65e359e7b0251046_foo: ; void *data = (void *)(long)ctx->data; 0: nopl (%rax,%rax) 5: nop 7: pushq %rbp 8: movq %rsp, %rbp b: movq (%rdi), %rsi ; void *data_end = (void *)(long)ctx->data_end; f: movq 8(%rdi), %rdi ; return bar(data_end - data); 13: subl %esi, %edi ; return bar(data_end - data); 15: callq 0x38 ; return bar(data_end - data); 1a: leave 1b: retq
int bar(int b):
bpf_prog_9b001d67a67f01cc_bar:
; int bar(int b) {
0: nopl (%rax,%rax)
5: nop
7: pushq %rbp
8: movq %rsp, %rbp
b: pushq %rbx
c: movl %edi, %ebx
; return bpf_get_prandom_u32() > b;
e: callq 0xffffffffcab00454
13: movl %eax, %edi
15: movl $1, %eax
; return bpf_get_prandom_u32() > b;
1a: cmpl %ebx, %edi
1c: ja 0x20
1e: xorl %eax, %eax
; return bpf_get_prandom_u32() > b;
20: popq %rbx
21: leave
22: retqLLVM, but _without_ the LLVMDisassembler_ReferenceType_InOut_None:
int foo(struct xdp_md * ctx):
bpf_prog_65e359e7b0251046_foo:
; void *data = (void *)(long)ctx->data;
0: nopl (%rax,%rax)
5: nop
7: pushq %rbp
8: movq %rsp, %rbp
b: movq (%rdi), %rsi
; void *data_end = (void *)(long)ctx->data_end;
f: movq 8(%rdi), %rdi
; return bar(data_end - data);
13: subl %esi, %edi
; return bar(data_end - data);
15: callq 30
; return bar(data_end - data);
1a: leave
1b: retq
int bar(int b):
bpf_prog_9b001d67a67f01cc_bar:
; int bar(int b) {
0: nopl (%rax,%rax)
5: nop
7: pushq %rbp
8: movq %rsp, %rbp
b: pushq %rbx
c: movl %edi, %ebx
; return bpf_get_prandom_u32() > b;
e: callq -894434239
13: movl %eax, %edi
15: movl $1, %eax
; return bpf_get_prandom_u32() > b;
1a: cmpl %ebx, %edi
1c: ja 2
1e: xorl %eax, %eax
; return bpf_get_prandom_u32() > b;
20: popq %rbx
21: leave
22: retqQuoted 25 lines · Quentin Monnet
2022-10-20 10:49 UTC-0700 ~ Alexei Starovoitov
<[email protected]>Quoted 13 lines · Quentin Monnet
Quoted 12 lines
tools/bpf/bpftool/jit_disasm.c +11
-0+ +/* This callback to set the ref_type is necessary to have the LLVM disassembler +* print PC-relative addresses instead of byte offsets for branch instruction +* targets. +*/ +static const char * +symbol_lookup_callback (__maybe_unused void *disasm_info, +__maybe_unused uint64_t ref_value, +uint64_t *ref_type,__maybe_unused uint64_t ref_PC, +__maybe_unused const char **ref_name) +{Quoted 8 lines
tools/bpf/bpftool/jit_disasm.c line 78
Quoted 3 lines
tools/bpf/bpftool/jit_disasm.c +3
-0+ *ref_type = LLVMDisassembler_ReferenceType_InOut_None; +return NULL ; +}Could you give an example before/after for asm
that contains 'call foo' instructions?
I'm not sure that aboveInOut_Nonewill not break
symbolization.
Quoted 2 lines
Hi Alexei, I ran a quick test and it doesn't seem we lose any information. Building from:
Thanks for checking. The output looks good.
Quoted 27 lines · Alexei Starovoitov
Quoted 25 lines · Quentin Monnet
2022-10-20 10:49 UTC-0700 ~ Alexei Starovoitov
<[email protected]>Quoted 21 lines · Quentin Monnet
Quoted 5 lines
tools/bpf/bpftool/jit_disasm.c +4
-0+ +/* This callback to set the ref_type is necessary to have the LLVM disassembler +* print PC-relative addresses instead of byte offsets for branch instruction +* targets. tools/bpf/bpftool/jit_disasm.c line 78
Quoted 10 lines
tools/bpf/bpftool/jit_disasm.c +10
-0+*/ +static const char * +symbol_lookup_callback (__maybe_unused void *disasm_info, +__maybe_unused uint64_t ref_value, +uint64_t *ref_type,__maybe_unused uint64_t ref_PC, +__maybe_unused const char **ref_name) +{ + *ref_type = LLVMDisassembler_ReferenceType_InOut_None; +return NULL ; +}Could you give an example before/after for asm
that contains 'call foo' instructions?
I'm not sure that aboveInOut_Nonewill not break
symbolization.
Quoted 4 lines
Quoted 2 lines
Hi Alexei, I ran a quick test and it doesn't seem we lose any information. Building from:
Thanks for checking. The output looks good.
Please rebase. It doesn't apply anymore.
PATCH v3 7/8 bpftool: Support setting alternative arch for JIT disasm with LLVM
In reply to Quentin MonnetFor offloaded BPF programs, instead of failing to create the LLVM disassembler without even looking for a triple at all, do run the function that attempts to retrieve a valid architecture name for the device.
It will still fail for the LLVM disassembler, because currently we have no valid triple to return (NFP disassembly is not supported by LLVM). But failing in that function is more logical than to assume in jit_disasm.c that passing an "arch" name is simply not supported.
--- tools/bpf/bpftool/common.c | 10 ++++++---- tools/bpf/bpftool/jit_disasm.c | 15 +++++++-------- tools/bpf/bpftool/main.h | 3 +-- tools/bpf/bpftool/prog.c | 6 ++---- 4 files changed, 16 insertions(+), 18 deletions(-)
tools/bpf/bpftool/common.c +6 -4
@@ -627,12 +627,11 @@ static int read_sysfs_netdev_hex_int(char *devname, const char *entry_name) }const char * -ifindex_to_bfd_params (__u32 ifindex,__u64 ns_dev,__u64 ns_ino, -const char **opt) +ifindex_to_arch (__u32 ifindex,__u64 ns_dev,__u64 ns_ino,const char **opt) { +__maybe_unused int device_id;char devname[IF_NAMESIZE ];int vendor_id; -int device_id;if (!ifindex_to_name_ns (ifindex, ns_dev, ns_ino, devname)) { p_err("Can't get net device name for ifindex %d: %s", ifindex,
@@ -647,6 +646,7 @@ ifindex_to_bfd_params(__u32 ifindex, __u64 ns_dev, __u64 ns_ino, }switch (vendor_id) { +#ifdef HAVE_LIBBFD_SUPPORT case 0x19ee : device_id =read_sysfs_netdev_hex_int (devname,"device" ); if (device_id != 0x4000 &&
@@ -655,8 +655,10 @@ ifindex_to_bfd_params(__u32 ifindex, __u64 ns_dev, __u64 ns_ino,p_info ("Unknown NFP device ID, assuming it is NFP-6xxx arch" ); *opt ="ctx4" ;return "NFP-6xxx" ; +#endif /* HAVE_LIBBFD_SUPPORT */ +/* No NFP support in LLVM, we have no valid triple to return. */ default : -p_err ("Can't get bfd arch name for device vendor id 0x%04x" , +p_err ("Can't get arch name for device vendor id 0x%04x" , vendor_id);return NULL ; }
tools/bpf/bpftool/jit_disasm.c +7 -8
@@ -84,12 +84,10 @@ init_context(disasm_ctx_t *ctx, const char *arch, {char *triple; -if (arch) { -p_err ("Architecture %s not supported" , arch); -return -1 ; - } - - triple =LLVMGetDefaultTargetTriple (); +if (arch) + triple =LLVMNormalizeTargetTriple (arch); +else + triple =LLVMGetDefaultTargetTriple ();if (!triple) {p_err ("Failed to retrieve triple" );return -1 ;
@@ -128,8 +126,9 @@ disassemble_insn(disasm_ctx_t *ctx, unsigned char *image, ssize_t len, int pc)int disasm_init (void ) { -LLVMInitializeNativeTarget (); -LLVMInitializeNativeDisassembler (); +LLVMInitializeAllTargetInfos (); +LLVMInitializeAllTargetMCs (); +LLVMInitializeAllDisassemblers ();return 0 ; }#endif /* HAVE_LLVM_SUPPORT */
tools/bpf/bpftool/main.h +1 -2
@@ -203,8 +203,7 @@ void print_hex_data_json(uint8_t *data, size_t len);unsigned int get_page_size (void );unsigned int get_possible_cpus (void );const char * -ifindex_to_bfd_params (__u32 ifindex,__u64 ns_dev,__u64 ns_ino, -const char **opt); +ifindex_to_arch (__u32 ifindex,__u64 ns_dev,__u64 ns_ino,const char **opt);struct btf_dumper {const struct btf *btf;
tools/bpf/bpftool/prog.c +2 -4
@@ -764,10 +764,8 @@ prog_dump(struct bpf_prog_info *info, enum dump_mode mode,const char *name =NULL ;if (info->ifindex) { - name =ifindex_to_bfd_params (info->ifindex, - info->netns_dev, - info->netns_ino, - &disasm_opt); + name =ifindex_to_arch (info->ifindex, info->netns_dev, + info->netns_ino, &disasm_opt);if (!name) goto exit_free; }
Signature · 1 line
2.34.1
PATCH v3 8/8 bpftool: Add llvm feature to "bpftool version"
In reply to Quentin MonnetSimilarly to "libbfd", add a "llvm" feature to the output of command "bpftool version" to indicate that LLVM is used for disassembling JIT-ed programs. This feature is mutually exclusive with "libbfd".
---
Note: There's a conflict on this change with the patch at
https://lore.kernel.org/bpf/[email protected]/
Supposiing both are accepted, I will of course rebase one or the other, accordingly.
--- tools/bpf/bpftool/Documentation/common_options.rst | 8 ++++---- tools/bpf/bpftool/main.c | 10 ++++++++++ 2 files changed, 14 insertions(+), 4 deletions(-)
tools/bpf/bpftool/Documentation/common_options.rst +4 -4
@@ -7,10 +7,10 @@ Print bpftool's version number (similar to **bpftool version**), the number of the libbpf version in use, and optional features that were included when bpftool was compiled. Optional features include linking - against libbfd to provide the disassembler for JIT-ted programs - (**bpftool prog dump jited**) and usage of BPF skeletons (some - features like **bpftool prog profile** or showing pids associated to - BPF objects may rely on it). + against LLVM or libbfd to provide the disassembler for JIT-ted + programs (**bpftool prog dump jited**) and usage of BPF skeletons + (some features like **bpftool prog profile** or showing pids + associated to BPF objects may rely on it). -j, --json Generate JSON output. For commands that cannot produce JSON, this
tools/bpf/bpftool/main.c +10 -0
@@ -89,6 +89,11 @@ static int do_version(int argc, char **argv)#else const bool has_libbfd = false;#endif +#ifdef HAVE_LLVM_SUPPORT +const bool has_llvm = true; +#else +const bool has_llvm = false; +#endif #ifdef BPFTOOL_WITHOUT_SKELETONS const bool has_skeletons = false;#else
@@ -112,6 +117,7 @@ static int do_version(int argc, char **argv)jsonw_name (json_wtr,"features" );jsonw_start_object (json_wtr);/* features */ jsonw_bool_field (json_wtr,"libbfd" , has_libbfd); +jsonw_bool_field (json_wtr,"llvm" , has_llvm);jsonw_bool_field (json_wtr,"libbpf_strict" , !legacy_libbpf);jsonw_bool_field (json_wtr,"skeletons" , has_skeletons);jsonw_end_object (json_wtr);/* features */
@@ -132,6 +138,10 @@ static int do_version(int argc, char **argv)printf (" libbfd" ); nb_features++; } +if (has_llvm) { +printf (" llvm" ); + nb_features++; + }if (!legacy_libbpf) {printf ("%s libbpf_strict" , nb_features++ ?"," :"" ); nb_features++;
Signature · 1 line
2.34.1
Re: [PATCH bpf-next v3 8/8] bpftool: Add llvm feature to "bpftool version"
Quoted 62 lines · Quentin Monnet
Similarly to "libbfd", add a "llvm" feature to the output of command "bpftool version" to indicate that LLVM is used for disassembling JIT-ed programs. This feature is mutually exclusive with "libbfd".
Signed-off-by Quentin Monnet <[email protected]>Tested-by Niklas Söderlund <[email protected]>Acked-by Yonghong Song <[email protected]>---
Note: There's a conflict on this change with the patch at
https://lore.kernel.org/bpf/[email protected]/
Supposiing both are accepted, I will of course rebase one or the other, accordingly.--- tools/bpf/bpftool/Documentation/common_options.rst | 8 ++++---- tools/bpf/bpftool/main.c | 10 ++++++++++ 2 files changed, 14 insertions(+), 4 deletions(-)tools/bpf/bpftool/Documentation/common_options.rst +4
-4@@ -7,10 +7,10 @@ Print bpftool's version number (similar to **bpftool version**), the number of the libbpf version in use, and optional features that were included when bpftool was compiled. Optional features include linking - against libbfd to provide the disassembler for JIT-ted programs - (**bpftool prog dump jited**) and usage of BPF skeletons (some - features like **bpftool prog profile** or showing pids associated to - BPF objects may rely on it). + against LLVM or libbfd to provide the disassembler for JIT-ted + programs (**bpftool prog dump jited**) and usage of BPF skeletons + (some features like **bpftool prog profile** or showing pids + associated to BPF objects may rely on it). -j, --json Generate JSON output. For commands that cannot produce JSON, thistools/bpf/bpftool/main.c +6
-0@@ -89,6 +89,11 @@ static int do_version(int argc, char **argv)#else const bool has_libbfd = false;#endif +#ifdef HAVE_LLVM_SUPPORT +const bool has_llvm = true; +#else +const bool has_llvm = false; +#endif #ifdef BPFTOOL_WITHOUT_SKELETONS const bool has_skeletons = false;#else @@ -112,6 +117,7 @@ static int do_version(int argc, char **argv)jsonw_name (json_wtr,"features" );jsonw_start_object (json_wtr);/* features */ jsonw_bool_field (json_wtr,"libbfd" , has_libbfd); +jsonw_bool_field (json_wtr,"llvm" , has_llvm);jsonw_bool_field (json_wtr,"libbpf_strict" , !legacy_libbpf);jsonw_bool_field (json_wtr,"skeletons" , has_skeletons);jsonw_end_object (json_wtr);/* features */
tools/bpf/bpftool/main.c static int do_version(int argc, char **argv) · line 145
Quoted 8 lines
tools/bpf/bpftool/main.c +4
-0@@ -132,6 +138,10 @@ static int do_version(int argc, char **argv)printf (" libbfd" ); nb_features++; } +if (has_llvm) { +printf (" llvm" ); + nb_features++; + }if (!legacy_libbpf) {
completely unrelated to your patch set, but we don't have legacy libbpf anymore, right? let's clean this part up (separately from this patch set, of course)?
Quoted 5 lines
tools/bpf/bpftool/main.c +0
-1printf ("%s libbpf_strict" , nb_features++ ?"," :"" ); nb_features++; --2.34.1
Re: [PATCH bpf-next v3 8/8] bpftool: Add llvm feature to "bpftool version"
2022-10-21 15:38 UTC-0700 ~ Andrii Nakryiko <[email protected]>
Quoted 67 lines · Quentin Monnet
Quoted 66 lines
Similarly to "libbfd", add a "llvm" feature to the output of command "bpftool version" to indicate that LLVM is used for disassembling JIT-ed programs. This feature is mutually exclusive with "libbfd".
Signed-off-by Quentin Monnet <[email protected]>Tested-by Niklas Söderlund <[email protected]>Acked-by Yonghong Song <[email protected]>---
Note: There's a conflict on this change with the patch at
https://lore.kernel.org/bpf/[email protected]/
Supposiing both are accepted, I will of course rebase one or the other, accordingly.--- tools/bpf/bpftool/Documentation/common_options.rst | 8 ++++---- tools/bpf/bpftool/main.c | 10 ++++++++++ 2 files changed, 14 insertions(+), 4 deletions(-)tools/bpf/bpftool/Documentation/common_options.rst +4
-4@@ -7,10 +7,10 @@ Print bpftool's version number (similar to **bpftool version**), the number of the libbpf version in use, and optional features that were included when bpftool was compiled. Optional features include linking - against libbfd to provide the disassembler for JIT-ted programs - (**bpftool prog dump jited**) and usage of BPF skeletons (some - features like **bpftool prog profile** or showing pids associated to - BPF objects may rely on it). + against LLVM or libbfd to provide the disassembler for JIT-ted + programs (**bpftool prog dump jited**) and usage of BPF skeletons + (some features like **bpftool prog profile** or showing pids + associated to BPF objects may rely on it). -j, --json Generate JSON output. For commands that cannot produce JSON, thistools/bpf/bpftool/main.c +7
-0@@ -89,6 +89,11 @@ static int do_version(int argc, char **argv)#else const bool has_libbfd = false;#endif +#ifdef HAVE_LLVM_SUPPORT +const bool has_llvm = true; +#else +const bool has_llvm = false; +#endif #ifdef BPFTOOL_WITHOUT_SKELETONS const bool has_skeletons = false;#else @@ -112,6 +117,7 @@ static int do_version(int argc, char **argv)jsonw_name (json_wtr,"features" );jsonw_start_object (json_wtr);/* features */ jsonw_bool_field (json_wtr,"libbfd" , has_libbfd); +jsonw_bool_field (json_wtr,"llvm" , has_llvm);jsonw_bool_field (json_wtr,"libbpf_strict" , !legacy_libbpf);jsonw_bool_field (json_wtr,"skeletons" , has_skeletons);jsonw_end_object (json_wtr);/* features */ @@ -132,6 +138,10 @@ static int do_version(int argc, char **argv)printf (" libbfd" ); nb_features++; } +if (has_llvm) {
Quoted 8 lines
tools/bpf/bpftool/main.c static int do_version(int argc, char **argv) · line 145
Quoted 4 lines
tools/bpf/bpftool/main.c +3
-0+printf (" llvm" ); + nb_features++; + }if (!legacy_libbpf) {completely unrelated to your patch set, but we don't have legacy libbpf anymore, right? let's clean this part up (separately from this patch set, of course)?
Yes agreed, this and the related warning in prog.c. And cleaning up all the libbpf_get_error() too. I'll work on this when I find some time.
Thanks,
Quentin