Skip to contentSkip to conversation

Shadow stacks for userspace

PATCH Superseded Rick Edgecombe 8 participants 104 messages Nov 4, 2022 – Nov 22, 2022

Subsystems (23)

v3 of 9 Superseded Latest is v9 →

lore
Share & tools
lore
#0 lore raw

v3 cover Shadow stacks for userspace

Hi,

This series implements Shadow Stacks for userspace using x86's Control-flow enforcement technology (CET). CET consists of two related security features:
Shadow Stacks and Indirect Branch Tracking. This series implements just the Shadow Stack part of this feature, and just for userspace.

The main use case for shadow stack is providing protection against return oriented programming attacks. It works by maintaining a secondary (shadow) stack using a special memory type that has protections against modification. When executing a CALL instruction, the processor pushes the return address to both the normal stack and to the special permissioned shadow stack. Upon RET, the processor pops the shadow stack copy and compares it to the normal stack copy. For more details, see the coverletter from v1 [0].

Thanks to all the reviewers of v2 [1]. There was a lot of very helpful feedback. For v3 there are a lot of small changes, but not really any big ones. I think the only remaining unresolved big issue is what to do about the existing binaries that will fail if glibc is updated to utilize the shadow stack kernel support. I am honestly not sure what is the right way forward. More discussion on this below.

Other notable changes were:
- Dropping sigaltshstk support. It sounded like this could be a future enhancement.
- Remove AMD patch (Thanks for Tested-by from John Allen)
- Promote ptrace/criu patches from OPTIONAL. If we might not have a new shadow stack bit on day 1, we should give ptrace users something to work with.
- Detangle arch_prctl() numbers from LAM

Smaller changes are in the patches after the break.

This is off of v6.1-rc3 and this cleanup series [2]. Find the full tree here [3].

Existing package compatibility problems
=======================================

This feature has a history of compatibility issues with existing userspace due to the userspace enabling landing upstream ahead of the kernel support. The first major issue encountered was the classic bad kernel regression - that some existing distros would fail to boot on CET enabled kernels. This was due to upstream glibc targeting an old abandoned CET kernel interface. It was resolved with v1 of this series by switching the kernel enabling interface so old glibc can’t find it, and is no longer an issue.

However there are still some lesser compatibility issues that are worth discussing, and possibly help avoid on the kernel's side. These are around apps being marked as shadow stack compatible when they actually are not.

When a binary is compatible with shadow stack it is supposed to be marked with a specific elf bit . The design of the shadow stack implementation is that glibc will detect this bit, and call kernel APIs to enable shadow stack.

Upstream glibc does not yet know how to do this. So the kernel’s shadow stack implementation, and any compatibility issues, will remain dormant until these CET glibc changes make it there. But many application binaries with the bit marked exist today, and critically, it was applied widely and automatically by some popular distro builds without verification that the packages actually support shadow stack. So when glibc is updated, shadow stack will suddenly turn on very widely with some missing verification.

In an ideal world this would be ok, because glibc has resolved many of the shadow stack violating conditions internally. So as long as apps stick to the normal usage of the glibc implementations for doing exotic stack things, then apps *should* just work. However, in the real world there are apps that don't stick to this. Especially JITs can violate the shadow stack enforcement.

In internal testing we have found one popular package, node.js, crashes on startup. It's unknown how many other apps would crash with more complicated usage than a basic startup test. My assumption is that there are more that would.

The other compatibility issue that comes from the widespread presence of this elf bit, is ptrace using applications. Some like, CRIU, do unusual shadow-stack-violating things to the seized process as part of basic operation. So while the application may not have issues in itself, they run into trouble working with shadow stack enabled tracees. Others, like GDB, would fail when doing some limited specific things like the "call a function" operation. While it’s not unusual to have a new feature break saving and restoring an individual target app, it is a bit unusual to have a new feature break CRIU usage for most apps on the system. The kernel changes required for a fixed CRIU and GDB are included in this series, but the userspace fixes are not upstream.

Blocking CET for the existing binaries
======================================

So we are not talking about a traditional kernel regression, where a fresh kernel update breaks userspace. Instead we are talking about a userspace component choosing to break existing apps by using new kernel functionality. I’m not sure if it is the kernel’s job to stop this or not. But the kernel actually could. It could detect the shadow stack elf bit and then later return failure for the APIs that enable shadow stack. This would result in these apps simply running normally without shadow stack.

Florian Weimer points out that this is a bit nasty, and I have to agree. I think the workaround for this belongs in glibc. The best thing would be to pick a new elf bit and have glibc look for this new one instead when deciding to call the kernel shadow stack APIs. Then the old binaries could continue to work without shadow stack, and new, more highly tested ones could be marked with the new bit. Since there would then be kernel support and also there is a lot of supporting HW out there, any CET enabling issues would be caught much earlier when starting over with a new bit. So you could have a normal slow rollout instead of a big bang.

But it doesn’t seem like the glibc developers are interested in working on a solution. So I included a patch to do the detection and disable on the kernel side and marked it RFC.

Distro’s could easily remove any kernel side check, and they can also fix userspace regressions with package updates, or even before they turn on shadow stack for their kernels. So we are talking about protecting users who will want to use bleeding edge kernels and glibcs they build themselves. Probably not the biggest category of users, but a helpful one to upstream developers.

This RFC patch also includes the ability for the kernel to allow broken binaries by Kconfig, gated by CONFIG_EXPERT. So with this kernel patch, a user who wants to try out CET would end up reading the Kconfig option and understanding the situation before encountering breakage. But having this release valve also is less of a forcing function to drive creation of a new elf bit. So if that never happens, allowing broken binaries (ones with the existing elf bit) would probably eventually have to become the default.

Another option might be a sysctl knob to toggle allowing these binaries instead of a Kconfig option.

[0] https://lore.kernel.org/lkml/[email protected]/
[1] https://lore.kernel.org/lkml/[email protected]/
[2] https://lore.kernel.org/lkml/[email protected]/
[3] https://github.com/rpedgeco/linux/tree/user_shstk_v3

Kirill A. Shutemov (1):
x86: Introduce userspace API for CET enabling

Mike Rapoport (1):
x86/cet/shstk: Add ARCH_CET_UNLOCK

Rick Edgecombe (10):
x86/fpu: Add helper for modifying xstate
mm: Don't allow write GUPs to shadow stack memory
mm: Warn on shadow stack memory in wrong vma x86/shstk: Introduce map_shadow_stack syscall x86/shstk: Support wrss for userspace
x86: Expose thread features in /proc/$PID/status x86/cet/shstk: Wire in CET interface selftests/x86: Add shadow stack test x86/fpu: Add helper for initing features fs/binfmt_elf: Block old shstk elf bit

Yu-cheng Yu (25):
Documentation/x86: Add CET description
x86/cet/shstk: Add Kconfig option for Shadow Stack x86/cpufeatures: Add CPU feature flags for shadow stacks x86/cpufeatures: Enable CET CR4 bit for shadow stack x86/fpu/xstate: Introduce CET MSR and XSAVES supervisor states x86/cet: Add user control-protection fault handler x86/mm: Remove _PAGE_DIRTY from kernel RO pages x86/mm: Move pmd_write(), pud_write() up in the file x86/mm: Introduce _PAGE_COW
x86/mm: Update pte_modify for _PAGE_COW
x86/mm: Update ptep_set_wrprotect() and pmdp_set_wrprotect() for
transition from _PAGE_DIRTY to _PAGE_COW
mm: Move VM_UFFD_MINOR_BIT from 37 to 38
mm: Introduce VM_SHADOW_STACK for shadow stack memory x86/mm: Check Shadow Stack page fault errors
x86/mm: Update maybe_mkwrite() for shadow stack
mm: Fixup places that call pte_mkwrite() directly
mm: Add guard pages around a shadow stack.
mm/mmap: Add shadow stack pages to memory accounting mm/mprotect: Exclude shadow stack from preserve_write
mm: Re-introduce vm_flags to do_mmap()
x86/shstk: Add user-mode shadow stack support x86/shstk: Handle thread shadow stack
x86/shstk: Introduce routines modifying shstk x86/shstk: Handle signals for shadow stack
x86/cet: Add PTRACE interface for CET

 Documentation/filesystems/proc.rst            |   1 +
 Documentation/x86/cet.rst                     | 151 +++++
 Documentation/x86/index.rst                   |   1 +
 arch/arm/kernel/signal.c                      |   2 +-
 arch/arm64/include/asm/elf.h                  |   5 +
 arch/arm64/kernel/signal.c                    |   2 +-
 arch/arm64/kernel/signal32.c                  |   2 +-
 arch/sparc/kernel/signal32.c                  |   2 +-
 arch/sparc/kernel/signal_64.c                 |   2 +-
 arch/x86/Kconfig                              |  37 ++
 arch/x86/Kconfig.assembler                    |   5 +
 arch/x86/entry/syscalls/syscall_64.tbl        |   1 +
 arch/x86/ia32/ia32_signal.c                   |   1 +
 arch/x86/include/asm/cet.h                    |  42 ++
 arch/x86/include/asm/cpufeatures.h            |   2 +
 arch/x86/include/asm/disabled-features.h      |  17 +-
 arch/x86/include/asm/elf.h                    |  11 +
 arch/x86/include/asm/fpu/api.h                |   9 +
 arch/x86/include/asm/fpu/regset.h             |   7 +-
 arch/x86/include/asm/fpu/sched.h              |   3 +-
 arch/x86/include/asm/fpu/types.h              |  14 +-
 arch/x86/include/asm/fpu/xstate.h             |   6 +-
 arch/x86/include/asm/idtentry.h               |   2 +-
 arch/x86/include/asm/mmu_context.h            |   2 +
 arch/x86/include/asm/msr-index.h              |   5 +
 arch/x86/include/asm/msr.h                    |  11 +
 arch/x86/include/asm/pgtable.h                | 321 ++++++++--
 arch/x86/include/asm/pgtable_types.h          |  65 +-
 arch/x86/include/asm/processor.h              |   9 +
 arch/x86/include/asm/special_insns.h          |  13 +
 arch/x86/include/asm/trap_pf.h                |   2 +
 arch/x86/include/uapi/asm/mman.h              |   3 +
 arch/x86/include/uapi/asm/prctl.h             |  11 +
 arch/x86/kernel/Makefile                      |   2 +
 arch/x86/kernel/cpu/common.c                  |  35 +-
 arch/x86/kernel/cpu/cpuid-deps.c              |   1 +
 arch/x86/kernel/cpu/proc.c                    |  23 +
 arch/x86/kernel/fpu/core.c                    |  60 +-
 arch/x86/kernel/fpu/regset.c                  |  90 +++
 arch/x86/kernel/fpu/xstate.c                  | 148 +++--
 arch/x86/kernel/fpu/xstate.h                  |   6 +
 arch/x86/kernel/idt.c                         |   2 +-
 arch/x86/kernel/process.c                     |  18 +-
 arch/x86/kernel/process_64.c                  |  41 +-
 arch/x86/kernel/ptrace.c                      |  20 +
 arch/x86/kernel/shstk.c                       | 499 +++++++++++++++
 arch/x86/kernel/signal.c                      |   7 +
 arch/x86/kernel/signal_compat.c               |   2 +-
 arch/x86/kernel/traps.c                       | 107 +++-
 arch/x86/mm/fault.c                           |  26 +
 arch/x86/mm/mmap.c                            |  23 +
 arch/x86/mm/pat/set_memory.c                  |   2 +-
 arch/x86/mm/pgtable.c                         |   6 +
 arch/x86/xen/enlighten_pv.c                   |   2 +-
 arch/x86/xen/xen-asm.S                        |   2 +-
 fs/aio.c                                      |   2 +-
 fs/binfmt_elf.c                               |  24 +-
 fs/proc/array.c                               |   6 +
 fs/proc/task_mmu.c                            |   3 +
 include/linux/elf.h                           |   6 +
 include/linux/mm.h                            |  37 +-
 include/linux/pgtable.h                       |  35 ++
 include/linux/proc_fs.h                       |   2 +
 include/linux/syscalls.h                      |   1 +
 include/uapi/asm-generic/siginfo.h            |   3 +-
 include/uapi/asm-generic/unistd.h             |   2 +-
 include/uapi/linux/elf.h                      |  16 +
 ipc/shm.c                                     |   2 +-
 kernel/sys_ni.c                               |   1 +
 mm/gup.c                                      |   2 +-
 mm/huge_memory.c                              |  19 +-
 mm/memory.c                                   |   7 +-
 mm/migrate_device.c                           |   4 +-
 mm/mmap.c                                     |  19 +-
 mm/mprotect.c                                 |   7 +
 mm/nommu.c                                    |   4 +-
 mm/userfaultfd.c                              |  10 +-
 mm/util.c                                     |   2 +-
 tools/testing/selftests/x86/Makefile          |   4 +-
 .../testing/selftests/x86/test_shadow_stack.c | 574 ++++++++++++++++++
 80 files changed, 2502 insertions(+), 179 deletions(-)
 create mode 100644 Documentation/x86/cet.rst
 create mode 100644 arch/x86/include/asm/cet.h
 create mode 100644 arch/x86/kernel/shstk.c
 create mode 100644 tools/testing/selftests/x86/test_shadow_stack.c
Signature · 1 line
2.17.1
#1 lore raw

PATCH v3 1/37 Documentation/x86: Add CET description

From: Yu-cheng Yu <[email protected]>

Introduce a new document on Control-flow Enforcement Technology (CET).

---

v3:
- Clarify kernel IBT is supported by the kernel. (Kees, Andrew Cooper)
- Clarify which arch_prctl's can take multiple bits. (Kees)
- Describe ASLR characteristics of thread shadow stacks. (Kees)
- Add exec section. (Andrew Cooper)
- Fix some capitalization (Bagas Sanjaya)
- Update new location of enablement status proc.
- Add info about new user_shstk software capability.
- Add more info about what the kernel pushes to the shadow stack on signal.

v2:
- Updated to new arch_prctl() API
- Add bit about new proc status

v1:
- Update and clarify the docs.
- Moved kernel parameters documentation to other patch.

 Documentation/x86/cet.rst   | 147 ++++++++++++++++++++++++++++++++++++
 Documentation/x86/index.rst |   1 +
 2 files changed, 148 insertions(+)
 create mode 100644 Documentation/x86/cet.rst
Documentation/x86/cet.rst new file +147 -0
new file mode 100644
index 000000000000..b56811566531
@@ -0,0 +1,147 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========================================
+Control-flow Enforcement Technology (CET)
+=========================================
+
+Overview
+========
+
+Control-flow Enforcement Technology (CET) is term referring to several
+related x86 processor features that provides protection against control
+flow hijacking attacks. The HW feature itself can be set up to protect
+both applications and the kernel.
+
+CET introduces Shadow Stack and Indirect Branch Tracking (IBT). Shadow stack
+is a secondary stack allocated from memory and cannot be directly modified by
+applications. When executing a CALL instruction, the processor pushes the
+return address to both the normal stack and the shadow stack. Upon
+function return, the processor pops the shadow stack copy and compares it
+to the normal stack copy. If the two differ, the processor raises a
+control-protection fault. IBT verifies indirect CALL/JMP targets are intended
+as marked by the compiler with 'ENDBR' opcodes. Not all CPU's have both Shadow
+Stack and Indirect Branch Tracking. Today in the 64-bit kernel, only userspace
+Shadow Stack and kernel IBT is supported in the kernel.
+
+The Kconfig option is X86_USER_SHADOW_STACK, and it can be disabled with
+the kernel parameter clearcpuid, like this: "clearcpuid=user_shstk".
+
+To build a user shadow stack enabled kernel, Binutils v2.29 or LLVM v6 or later
+are required.
+
+At run time, /proc/cpuinfo shows CET features if the processor supports
+CET. "shstk" and "ibt" relate to the individual HW features. "user_shstk"
+relates to whether the userspace shadow stack specifically is supported.
+
+Application Enabling
+====================
+
+An application's CET capability is marked in its ELF note and can be verified
+from readelf/llvm-readelf output:
+
+    readelf -n <application> | grep -a SHSTK
+        properties: x86 feature: SHSTK
+
+The kernel does not process these applications markers directly. Applications
+or loaders must enable CET features using the interface described in section 4.
+Typically this would be done in dynamic loader or static runtime objects, as is
+the case in GLIBC.
+
+CET arch_prctl()'s
+==================
+
+Elf features should be enabled by the loader using the below arch_prctl's.
+
+arch_prctl(ARCH_CET_ENABLE, unsigned int feature)
+    Enable a single feature specified in 'feature'. Can only operate on
+    one feature at a time.
+
+arch_prctl(ARCH_CET_DISABLE, unsigned int feature)
+    Disable a single feature specified in 'feature'. Can only operate on
+    one feature at a time.
+
+arch_prctl(ARCH_CET_LOCK, unsigned int features)
+    Lock in features at their current enabled or disabled status. 'features'
+    is a mask of all features to lock. All bits set are processed, unset bits
+    are ignored. The mask is ORed with the existing value. So any feature bits
+    set here cannot be enabled or disabled afterwards.
+
+The return values are as following:
+    On success, return 0. On error, errno can be::
+
+        -EPERM if any of the passed feature are locked.
+        -EOPNOTSUPP if the feature is not supported by the hardware or
+         disabled by kernel parameter.
+        -EINVAL arguments (non existing feature, etc)
+
+Currently shadow stack and WRSS are supported via this interface. WRSS
+can only be enabled with shadow stack, and is automatically disabled
+if shadow stack is disabled.
+
+Proc status
+===========
+To check if an application is actually running with shadow stack, the
+user can read the /proc/$PID/status. It will report "wrss" or "shstk"
+depending on what is enabled. The lines look like this::
+
+    x86_Thread_features: shstk wrss
+    x86_Thread_features_locked: shstk wrss
+
+The implementation of the Shadow Stack
+======================================
+
+Shadow Stack size
+-----------------
+
+A task's shadow stack is allocated from memory to a fixed size of
+MIN(RLIMIT_STACK, 4 GB). In other words, the shadow stack is allocated to
+the maximum size of the normal stack, but capped to 4 GB. However,
+a compat-mode application's address space is smaller, each of its thread's
+shadow stack size is MIN(1/4 RLIMIT_STACK, 4 GB).
+
+Signal
+------
+
+By default, the main program and its signal handlers use the same shadow
+stack. Because the shadow stack stores only return addresses, a large
+shadow stack covers the condition that both the program stack and the
+signal alternate stack run out.
+
+When a signal happens, the old pre-signal state is pushed on the stack. When
+shadow stack is enabled, the shadow stack specific state is pushed onto the
+shadow stack. Today this is only the old SSP (shadow stack pointer), pushed
+in a special format with bit 63 set. On sigreturn this old SSP token is
+verified and restored by the kernel. The kernel will also push the normal
+restorer address to the shadow stack to help userspace avoid a shadow stack
+violation on the sigreturn path that goes through the restorer.
+
+So the shadow stack signal frame format is as follows::
+
+    |1...old SSP| - Pointer to old pre-signal ssp in sigframe token format
+                    (bit 63 set to 1)
+    |        ...| - Other state may be added in the future
+
+
+
+Fork
+----
+
+The shadow stack's vma has VM_SHADOW_STACK flag set; its PTEs are required
+to be read-only and dirty. When a shadow stack PTE is not RO and dirty, a
+shadow access triggers a page fault with the shadow stack access bit set
+in the page fault error code.
+
+When a task forks a child, its shadow stack PTEs are copied and both the
+parent's and the child's shadow stack PTEs are cleared of the dirty bit.
+Upon the next shadow stack access, the resulting shadow stack page fault
+is handled by page copy/re-use.
+
+When a pthread child is created, the kernel allocates a new shadow stack
+for the new thread. New shadow stack's behave like mmap() with respect to
+ASLR behavior.
+
+Exec
+----
+
+On exec, shadow stack features are disabled by the kernel. At which point,
+userspace can choose to re-enable, or lock them.
Documentation/x86/index.rst +1 -0
index c73d133fd37c..9ac03055c4b5 100644
@@ -22,6 +22,7 @@ x86-specific Documentation
    mtrr
    pat
    intel-hfi
+   cet
    iommu
    intel_txt
    amd-memory-encryption
Signature · 1 line
2.17.1
#2 lore raw

PATCH v3 2/37 x86/cet/shstk: Add Kconfig option for Shadow Stack

In reply to Rick Edgecombe

From: Yu-cheng Yu <[email protected]>

Shadow Stack provides protection for applications against function return address corruption. It is active when the processor supports it, the kernel has CONFIG_X86_SHADOW_STACK enabled, and the application is built for the feature. This is only implemented for the 64-bit kernel. When it is enabled, legacy non-Shadow Stack applications continue to work, but without protection.

Since there is another feature that utilizes CET (Kernel IBT) that will share implementation with Shadow Stacks, create CONFIG_CET to signify that at least one CET feature is configured.

---

v3:
- Add X86_CET (Kees)
- Add back WRUSS dependency (Kees)
- Fix verbiage (Dave)
- Change from promt to bool (Kirill)
- Add more to commit log

v2:
- Remove already wrong kernel size increase info (tlgx)
- Change prompt to remove "Intel" (tglx)
- Update line about what CPUs are supported (Dave)

Yu-cheng v25:
- Remove X86_CET and use X86_SHADOW_STACK directly.

Yu-cheng v24:
- Update for the splitting X86_CET to X86_SHADOW_STACK and X86_IBT.

 arch/x86/Kconfig           | 24 ++++++++++++++++++++++++
 arch/x86/Kconfig.assembler |  5 +++++
 2 files changed, 29 insertions(+)
arch/x86/Kconfig +24 -0
index 67745ceab0db..f3d14f5accce 100644
@@ -1852,6 +1852,11 @@ config CC_HAS_IBT
 		  (CC_IS_CLANG && CLANG_VERSION >= 140000)) && \
 		  $(as-instr,endbr64)
 
+config X86_CET
+	def_bool n
+	help
+	  CET features configured (Shadow Stack or IBT)
+
 config X86_KERNEL_IBT
 	prompt "Indirect Branch Tracking"
 	bool
@@ -1859,6 +1864,7 @@ config X86_KERNEL_IBT
 	# https://github.com/llvm/llvm-project/commit/9d7001eba9c4cb311e03cd8cdc231f9e579f2d0f
 	depends on !LD_IS_LLD || LLD_VERSION >= 140000
 	select OBJTOOL
+	select X86_CET
 	help
 	  Build the kernel with support for Indirect Branch Tracking, a
 	  hardware support course-grain forward-edge Control Flow Integrity
@@ -1953,6 +1959,24 @@ config X86_SGX
 
 	  If unsure, say N.
 
+config X86_USER_SHADOW_STACK
+	bool "X86 Userspace Shadow Stack"
+	depends on AS_WRUSS
+	depends on X86_64
+	select ARCH_USES_HIGH_VMA_FLAGS
+	select X86_CET
+	help
+	  Shadow Stack protection is a hardware feature that detects function
+	  return address corruption.  This helps mitigate ROP attacks.
+	  Applications must be enabled to use it, and old userspace does not
+	  get protection "for free".
+
+	  CPUs supporting shadow stacks were first released in 2020.
+
+	  See Documentation/x86/cet.rst for more information.
+
+	  If unsure, say N.
+
 config EFI
 	bool "EFI runtime service support"
 	depends on ACPI
arch/x86/Kconfig.assembler +5 -0
index 26b8c08e2fc4..00c79dd93651 100644
@@ -19,3 +19,8 @@ config AS_TPAUSE
 	def_bool $(as-instr,tpause %ecx)
 	help
 	  Supported by binutils >= 2.31.1 and LLVM integrated assembler >= V7
+
+config AS_WRUSS
+	def_bool $(as-instr,wrussq %rax$(comma)(%rbx))
+	help
+	  Supported by binutils >= 2.31 and LLVM integrated assembler
Signature · 1 line
2.17.1
#3 lore raw

PATCH v3 3/37 x86/cpufeatures: Add CPU feature flags for shadow stacks

In reply to Rick Edgecombe

From: Yu-cheng Yu <[email protected]>

The Control-Flow Enforcement Technology contains two related features, one of which is Shadow Stacks. Future patches will utilize this feature for shadow stack support in KVM, so add a CPU feature flags for Shadow Stacks (CPUID.(EAX=7,ECX=0):ECX[bit 7]).

To protect shadow stack state from malicious modification, the registers are only accessible in supervisor mode. This implementation context-switches the registers with XSAVES. Make X86_FEATURE_SHSTK depend on XSAVES.

The shadow stack feature, enumerated by the CPUID bit described above, encompasses both supervisor and userspace support for shadow stack. In near future patches, only userspace shadow stack will be enabled. In expectation of future supervisor shadow stack support, create a software CPU capability to enumerate kernel utilization of userspace shadow stack support. This will also allow for userspace shadow stack to be disabled, while leaving the shadow stack hardware capability exposed in the cpuinfo proc. This user shadow stack bit should depend on the HW "shstk" capability and that logic will be implemented in future patches.

---

v3:
- Add user specific shadow stack cpu cap (Andrew Cooper)
- Drop reviewed-bys from Boris and Kees due to the above change.

v2:
- Remove IBT reference in commit log (Kees)
- Describe xsaves dependency using text from (Dave)

v1:
- Remove IBT, can be added in a follow on IBT series.

Yu-cheng v25:
- Make X86_FEATURE_IBT depend on X86_FEATURE_SHSTK.

 arch/x86/include/asm/cpufeatures.h       | 2 ++
 arch/x86/include/asm/disabled-features.h | 9 ++++++++-
 arch/x86/kernel/cpu/cpuid-deps.c         | 1 +
 3 files changed, 11 insertions(+), 1 deletion(-)
arch/x86/include/asm/cpufeatures.h +2 -0
index b71f4f2ecdd5..5626ecb8a080 100644
@@ -304,6 +304,7 @@
 #define X86_FEATURE_UNRET		(11*32+15) /* "" AMD BTB untrain return */
 #define X86_FEATURE_USE_IBPB_FW		(11*32+16) /* "" Use IBPB during runtime firmware calls */
 #define X86_FEATURE_RSB_VMEXIT_LITE	(11*32+17) /* "" Fill RSB on VM exit when EIBRS is enabled */
+#define X86_FEATURE_USER_SHSTK		(11*32+18) /* Shadow stack support for user mode applications */
 
 /* Intel-defined CPU features, CPUID level 0x00000007:1 (EAX), word 12 */
 #define X86_FEATURE_AVX_VNNI		(12*32+ 4) /* AVX VNNI instructions */
@@ -365,6 +366,7 @@
 #define X86_FEATURE_OSPKE		(16*32+ 4) /* OS Protection Keys Enable */
 #define X86_FEATURE_WAITPKG		(16*32+ 5) /* UMONITOR/UMWAIT/TPAUSE Instructions */
 #define X86_FEATURE_AVX512_VBMI2	(16*32+ 6) /* Additional AVX512 Vector Bit Manipulation Instructions */
+#define X86_FEATURE_SHSTK		(16*32+ 7) /* Shadow Stack */
 #define X86_FEATURE_GFNI		(16*32+ 8) /* Galois Field New Instructions */
 #define X86_FEATURE_VAES		(16*32+ 9) /* Vector AES */
 #define X86_FEATURE_VPCLMULQDQ		(16*32+10) /* Carry-Less Multiplication Double Quadword */
arch/x86/include/asm/disabled-features.h +8 -1
index 33d2cd04d254..30cd12905499 100644
@@ -87,6 +87,12 @@
 # define DISABLE_TDX_GUEST	(1 << (X86_FEATURE_TDX_GUEST & 31))
 #endif
 
+#ifdef CONFIG_X86_USER_SHADOW_STACK
+#define DISABLE_USER_SHSTK	0
+#else
+#define DISABLE_USER_SHSTK	(1 << (X86_FEATURE_USER_SHSTK & 31))
+#endif
+
 /*
  * Make sure to add features to the correct mask
  */
@@ -101,7 +107,8 @@
 #define DISABLED_MASK8	(DISABLE_TDX_GUEST)
 #define DISABLED_MASK9	(DISABLE_SGX)
 #define DISABLED_MASK10	0
-#define DISABLED_MASK11	(DISABLE_RETPOLINE|DISABLE_RETHUNK|DISABLE_UNRET)
+#define DISABLED_MASK11	(DISABLE_RETPOLINE|DISABLE_RETHUNK|DISABLE_UNRET| \
+			 DISABLE_USER_SHSTK)
 #define DISABLED_MASK12	0
 #define DISABLED_MASK13	0
 #define DISABLED_MASK14	0
arch/x86/kernel/cpu/cpuid-deps.c +1 -0
index c881bcafba7d..bf1b55a1ba21 100644
@@ -78,6 +78,7 @@ static const struct cpuid_dep cpuid_deps[] = {
 	{ X86_FEATURE_XFD,			X86_FEATURE_XSAVES    },
 	{ X86_FEATURE_XFD,			X86_FEATURE_XGETBV1   },
 	{ X86_FEATURE_AMX_TILE,			X86_FEATURE_XFD       },
+	{ X86_FEATURE_SHSTK,			X86_FEATURE_XSAVES    },
 	{}
 };
 
Signature · 1 line
2.17.1
maintainer
#4 lore raw

Re: [PATCH v3 03/37] x86/cpufeatures: Add CPU feature flags for shadow stacks

arch/x86/include/asm/cpufeatures.h line 307

Quoted 9 lines · Rick Edgecombe
arch/x86/include/asm/cpufeatures.h +1 -0
index b71f4f2ecdd5..5626ecb8a080 100644
@@ -304,6 +304,7 @@
 #define X86_FEATURE_UNRET		(11*32+15) /* "" AMD BTB untrain return */
 #define X86_FEATURE_USE_IBPB_FW		(11*32+16) /* "" Use IBPB during runtime firmware calls */
 #define X86_FEATURE_RSB_VMEXIT_LITE	(11*32+17) /* "" Fill RSB on VM exit when EIBRS is enabled */
+#define X86_FEATURE_USER_SHSTK		(11*32+18) /* Shadow stack support for user mode applications */

This clashes with the calldepth tracking in tip, see updated diff below.

Quoted 1 line

This is off of v6.1-rc3

In the future, please do all your x86 patches against latest tip/master so that there's no issues like that.

Thx.

---

arch/x86/include/asm/cpufeatures.h +2 -0
index 97669aaf1202..8d67249f5232 100644
@@ -306,6 +306,7 @@
 #define X86_FEATURE_RSB_VMEXIT_LITE	(11*32+17) /* "" Fill RSB on VM exit when EIBRS is enabled */
 #define X86_FEATURE_SGX_EDECCSSA	(11*32+18) /* "" SGX EDECCSSA user leaf function */
 #define X86_FEATURE_CALL_DEPTH		(11*32+19) /* "" Call depth tracking for RSB stuffing */
+#define X86_FEATURE_USER_SHSTK		(11*32+20) /* Shadow stack support for user mode applications */
 
 /* Intel-defined CPU features, CPUID level 0x00000007:1 (EAX), word 12 */
 #define X86_FEATURE_AVX_VNNI		(12*32+ 4) /* AVX VNNI instructions */
@@ -367,6 +368,7 @@
 #define X86_FEATURE_OSPKE		(16*32+ 4) /* OS Protection Keys Enable */
 #define X86_FEATURE_WAITPKG		(16*32+ 5) /* UMONITOR/UMWAIT/TPAUSE Instructions */
 #define X86_FEATURE_AVX512_VBMI2	(16*32+ 6) /* Additional AVX512 Vector Bit Manipulation Instructions */
+#define X86_FEATURE_SHSTK		(16*32+ 7) /* Shadow Stack */
 #define X86_FEATURE_GFNI		(16*32+ 8) /* Galois Field New Instructions */
 #define X86_FEATURE_VAES		(16*32+ 9) /* Vector AES */
 #define X86_FEATURE_VPCLMULQDQ		(16*32+10) /* Carry-Less Multiplication Double Quadword */
arch/x86/include/asm/disabled-features.h +7 -1
index bbb03b25263e..79fbb7799526 100644
@@ -93,6 +93,12 @@
 # define DISABLE_TDX_GUEST	(1 << (X86_FEATURE_TDX_GUEST & 31))
 #endif
 
+#ifdef CONFIG_X86_USER_SHADOW_STACK
+#define DISABLE_USER_SHSTK	0
+#else
+#define DISABLE_USER_SHSTK	(1 << (X86_FEATURE_USER_SHSTK & 31))
+#endif
+
 /*
  * Make sure to add features to the correct mask
  */
@@ -108,7 +114,7 @@
 #define DISABLED_MASK9	(DISABLE_SGX)
 #define DISABLED_MASK10	0
 #define DISABLED_MASK11	(DISABLE_RETPOLINE|DISABLE_RETHUNK|DISABLE_UNRET| \
-			 DISABLE_CALL_DEPTH_TRACKING)
+			 DISABLE_CALL_DEPTH_TRACKING|DISABLE_USER_SHSTK)
 #define DISABLED_MASK12	0
 #define DISABLED_MASK13	0
 #define DISABLED_MASK14	0
arch/x86/kernel/cpu/cpuid-deps.c +1 -0
index d95221117129..c3e4e5246df9 100644
@@ -79,6 +79,7 @@ static const struct cpuid_dep cpuid_deps[] = {
 	{ X86_FEATURE_XFD,			X86_FEATURE_XSAVES    },
 	{ X86_FEATURE_XFD,			X86_FEATURE_XGETBV1   },
 	{ X86_FEATURE_AMX_TILE,			X86_FEATURE_XFD       },
+	{ X86_FEATURE_SHSTK,			X86_FEATURE_XSAVES    },
 	{}
 };
 
Signature · 4 lines
Regards/Gruss,
    Boris.

https://people.kernel.org/tglx/notes-about-netiquette
#5 lore raw

PATCH v3 4/37 x86/cpufeatures: Enable CET CR4 bit for shadow stack

In reply to Rick Edgecombe

From: Yu-cheng Yu <[email protected]>

Setting CR4.CET is a prerequisite for utilizing any CET features, most of which also require setting MSRs.

Kernel IBT already enables the CET CR4 bit when it detects IBT HW support and is configured with kernel IBT. However, future patches that enable userspace shadow stack support will need the bit set as well. So change the logic to enable it in either case.

Clear MSR_IA32_U_CET in cet_disable() so that it can't live to see userspace in a new kexec-ed kernel that has CR4.CET set from kernel IBT.

---

v3:
- Remove stay new line (Boris)
- Simplify commit log (Andrew Cooper)

v2:
- In the shadow stack case, go back to only setting CR4.CET if the kernel is compiled with user shadow stack support.
- Clear MSR_IA32_U_CET as well. (PeterZ)

KVM refresh:
- Set CR4.CET if SHSTK or IBT are supported by HW, so that KVM can support CET even if IBT is disabled.
- Drop no_user_shstk (Dave Hansen)
- Elaborate on what the CR4 bit does in the commit log
- Integrate with Kernel IBT logic

v1:
- Moved kernel-parameters.txt changes here from patch 1.

 arch/x86/kernel/cpu/common.c | 35 +++++++++++++++++++++++++++++------
 1 file changed, 29 insertions(+), 6 deletions(-)
arch/x86/kernel/cpu/common.c +29 -6
index 3e508f239098..0ba0a136adcb 100644
@@ -596,28 +596,51 @@ __noendbr void ibt_restore(u64 save)
 
 #endif
 
+#ifdef CONFIG_X86_CET
 static __always_inline void setup_cet(struct cpuinfo_x86 *c)
 {
-	u64 msr = CET_ENDBR_EN;
+	bool kernel_ibt = HAS_KERNEL_IBT && cpu_feature_enabled(X86_FEATURE_IBT);
+	bool user_shstk;
+	u64 msr = 0;
 
-	if (!HAS_KERNEL_IBT ||
-	    !cpu_feature_enabled(X86_FEATURE_IBT))
+	/*
+	 * Enable user shadow stack only if the Linux defined user shadow stack
+	 * cap was not cleared by command line.
+	 */
+	user_shstk = cpu_feature_enabled(X86_FEATURE_SHSTK) &&
+		     IS_ENABLED(CONFIG_X86_USER_SHADOW_STACK) &&
+		     !test_bit(X86_FEATURE_USER_SHSTK, (unsigned long *)cpu_caps_cleared);
+
+	if (!kernel_ibt && !user_shstk)
 		return;
 
+	if (user_shstk)
+		set_cpu_cap(c, X86_FEATURE_USER_SHSTK);
+
+	if (kernel_ibt)
+		msr = CET_ENDBR_EN;
+
 	wrmsrl(MSR_IA32_S_CET, msr);
 	cr4_set_bits(X86_CR4_CET);
 
-	if (!ibt_selftest()) {
+	if (kernel_ibt && !ibt_selftest()) {
 		pr_err("IBT selftest: Failed!\n");
 		setup_clear_cpu_cap(X86_FEATURE_IBT);
 		return;
 	}
 }
+#else /* CONFIG_X86_CET */
+static inline void setup_cet(struct cpuinfo_x86 *c) {}
+#endif
 
 __noendbr void cet_disable(void)
 {
-	if (cpu_feature_enabled(X86_FEATURE_IBT))
-		wrmsrl(MSR_IA32_S_CET, 0);
+	if (!(cpu_feature_enabled(X86_FEATURE_IBT) ||
+	      cpu_feature_enabled(X86_FEATURE_SHSTK)))
+		return;
+
+	wrmsrl(MSR_IA32_S_CET, 0);
+	wrmsrl(MSR_IA32_U_CET, 0);
 }
 
 /*
Signature · 1 line
2.17.1
maintainer
#6 lore raw

Re: [PATCH v3 04/37] x86/cpufeatures: Enable CET CR4 bit for shadow stack

Quoted 6 lines · Rick Edgecombe

static __always_inline void setup_cet(struct cpuinfo_x86 *c) {

arch/x86/kernel/cpu/common.c +3 -1
-	u64 msr = CET_ENDBR_EN;
+	bool kernel_ibt = HAS_KERNEL_IBT && cpu_feature_enabled(X86_FEATURE_IBT);
+	bool user_shstk;
+	u64 msr = 0;

arch/x86/kernel/cpu/common.c __noendbr void ibt_restore(u64 save) · line 612

Quoted 10 lines
arch/x86/kernel/cpu/common.c +7 -2
 
-	if (!HAS_KERNEL_IBT ||
-	    !cpu_feature_enabled(X86_FEATURE_IBT))
+	/*
+	 * Enable user shadow stack only if the Linux defined user shadow stack
+	 * cap was not cleared by command line.
+	 */
+	user_shstk = cpu_feature_enabled(X86_FEATURE_SHSTK) &&
+		     IS_ENABLED(CONFIG_X86_USER_SHADOW_STACK) &&
+		     !test_bit(X86_FEATURE_USER_SHSTK, (unsigned long *)cpu_caps_cleared);

Huh, why poke at cpu_caps_cleared?

Look below:

Quoted 23 lines
arch/x86/kernel/cpu/common.c +11 -1
+	if (!kernel_ibt && !user_shstk)
 		return;
 
+	if (user_shstk)
+		set_cpu_cap(c, X86_FEATURE_USER_SHSTK);
+
+	if (kernel_ibt)
+		msr = CET_ENDBR_EN;
+
 	wrmsrl(MSR_IA32_S_CET, msr);
 	cr4_set_bits(X86_CR4_CET);
 
-	if (!ibt_selftest()) {
+	if (kernel_ibt && !ibt_selftest()) {
 		pr_err("IBT selftest: Failed!\n");
 		setup_clear_cpu_cap(X86_FEATURE_IBT);
 		return;
 	}
 }
+#else /* CONFIG_X86_CET */
+static inline void setup_cet(struct cpuinfo_x86 *c) {}
+#endif
 

arch/x86/kernel/cpu/common.c __noendbr void ibt_restore(u64 save) · line 643

Quoted 10 lines
arch/x86/kernel/cpu/common.c +6 -2
 __noendbr void cet_disable(void)
 {
-	if (cpu_feature_enabled(X86_FEATURE_IBT))
-		wrmsrl(MSR_IA32_S_CET, 0);
+	if (!(cpu_feature_enabled(X86_FEATURE_IBT) ||
+	      cpu_feature_enabled(X86_FEATURE_SHSTK)))
+		return;
+
+	wrmsrl(MSR_IA32_S_CET, 0);
+	wrmsrl(MSR_IA32_U_CET, 0);

Here you need to do

	setup_clear_cpu_cap(X86_FEATURE_IBT);
	setup_clear_cpu_cap(X86_FEATURE_SHSTK);

and then the cpu_feature_enabled() test above alone should suffice.

But, before you do that, I'd like to ask you to update your patchset ontop of tip/master because the conflicts are getting non-trivial. This one doesn't even want to apply with a large fuzz:

$ patch -p1 --dry-run -F20 -i /tmp/new
checking file arch/x86/kernel/cpu/common.c
Hunk #1 FAILED at 596.
1 out of 1 hunk FAILED

Thx.

Signature · 4 lines
Regards/Gruss,
    Boris.

https://people.kernel.org/tglx/notes-about-netiquette
#7 lore raw

Re: [PATCH v3 04/37] x86/cpufeatures: Enable CET CR4 bit for shadow stack

Quoted 9 lines · Borislav Petkov
Quoted 8 lines · Rick Edgecombe

static __always_inline void setup_cet(struct cpuinfo_x86 *c) {

(quoted diff) +1 -1
-	u64 msr = CET_ENDBR_EN;
+	bool kernel_ibt = HAS_KERNEL_IBT &&

cpu_feature_enabled(X86_FEATURE_IBT);

arch/x86/kernel/cpu/common.c +2 -0
+	bool user_shstk;
+	u64 msr = 0;
Quoted 13 lines
Quoted 11 lines
arch/x86/kernel/cpu/common.c +2 -2
-	if (!HAS_KERNEL_IBT ||
-	    !cpu_feature_enabled(X86_FEATURE_IBT))
+	/*
+	 * Enable user shadow stack only if the Linux defined user

shadow stack

arch/x86/kernel/cpu/common.c +5 -0
+	 * cap was not cleared by command line.
+	 */
+	user_shstk = cpu_feature_enabled(X86_FEATURE_SHSTK) &&
+		     IS_ENABLED(CONFIG_X86_USER_SHADOW_STACK) &&
+		     !test_bit(X86_FEATURE_USER_SHSTK, (unsigned long

*)cpu_caps_cleared);

Huh, why poke at cpu_caps_cleared?

It was to catch if the software user shadow stack feature gets disabled at boot with the "clearcpuid" command. Is there a better way to do this?

Quoted 39 lines

Look below:

Quoted 23 lines
arch/x86/kernel/cpu/common.c +11 -1
+	if (!kernel_ibt && !user_shstk)
 		return;
 
+	if (user_shstk)
+		set_cpu_cap(c, X86_FEATURE_USER_SHSTK);
+
+	if (kernel_ibt)
+		msr = CET_ENDBR_EN;
+
 	wrmsrl(MSR_IA32_S_CET, msr);
 	cr4_set_bits(X86_CR4_CET);
 
-	if (!ibt_selftest()) {
+	if (kernel_ibt && !ibt_selftest()) {
 		pr_err("IBT selftest: Failed!\n");
 		setup_clear_cpu_cap(X86_FEATURE_IBT);
 		return;
 	}
 }
+#else /* CONFIG_X86_CET */
+static inline void setup_cet(struct cpuinfo_x86 *c) {}
+#endif
 

arch/x86/kernel/cpu/common.c __noendbr void ibt_restore(u64 save) · line 643

Quoted 10 lines
arch/x86/kernel/cpu/common.c +6 -2
 __noendbr void cet_disable(void)
 {
-	if (cpu_feature_enabled(X86_FEATURE_IBT))
-		wrmsrl(MSR_IA32_S_CET, 0);
+	if (!(cpu_feature_enabled(X86_FEATURE_IBT) ||
+	      cpu_feature_enabled(X86_FEATURE_SHSTK)))
+		return;
+
+	wrmsrl(MSR_IA32_S_CET, 0);
+	wrmsrl(MSR_IA32_U_CET, 0);

Here you need to do

Quoted 2 lines
	setup_clear_cpu_cap(X86_FEATURE_IBT);
	setup_clear_cpu_cap(X86_FEATURE_SHSTK);

This only gets called by kexec way after boot, as kexec is prepping to transition to the new kernel. Do we want to be clearing feature bits at that time?

Quoted 8 lines

and then the cpu_feature_enabled() test above alone should suffice.

But, before you do that, I'd like to ask you to update your patchset ontop of tip/master because the conflicts are getting non-trivial. This
one doesn't even want to apply with a large fuzz:

Quoted 6 lines
$ patch -p1 --dry-run -F20 -i /tmp/new
checking file arch/x86/kernel/cpu/common.c
Hunk #1 FAILED at 596.
1 out of 1 hunk FAILED

Thx.

Sure, sorry about that. I'll target tip for the next version.

Quoted 1 line
maintainer
#8 lore raw

Re: [PATCH v3 04/37] x86/cpufeatures: Enable CET CR4 bit for shadow stack

Quoted 2 lines · Rick P

It was to catch if the software user shadow stack feature gets disabled at boot with the "clearcpuid" command.

I don't understand. clearcpuid does setup_clear_cpu_cap() too. It would eventually clear the bit in boot_cpu_data.x86_capability's AFAICT.

cpu_feature_enabled() looks at boot_cpu_data too.

So what's the problem?

Oh, and also, you've added that clearcpuid thing to the help docs. Please remove it. clearcpuid= taints the kernel and we've left it in because some of your colleagues really wanted it for testing or whatnot. But it is crap and it was on its way out at some point so we better not proliferate its use any more.

Quoted 1 line

Is there a better way to do this?

Yeah, cpu_feature_enabled() should be enough and if it isn't, then we need to fix it to be.

Which reminds me, I'd need to take Maxim's patch too:

https://lore.kernel.org/r/[email protected]

as it is a simplification.

Quoted 8 lines
Quoted 4 lines

Here you need to do

	setup_clear_cpu_cap(X86_FEATURE_IBT);
	setup_clear_cpu_cap(X86_FEATURE_SHSTK);

This only gets called by kexec way after boot, as kexec is prepping to transition to the new kernel. Do we want to be clearing feature bits at that time?

Hmm, I was under the impression you'll have the usual chicken bit "noshstk" which gets added with every big feature. So it'll call that thing here.

Quoted 1 line

Sure, sorry about that. I'll target tip for the next version.

Thanks!

Signature · 4 lines
Regards/Gruss,
    Boris.

https://people.kernel.org/tglx/notes-about-netiquette
#9 lore raw

Re: [PATCH v3 04/37] x86/cpufeatures: Enable CET CR4 bit for shadow stack

Quoted 5 lines · Borislav Petkov
Quoted 3 lines · Rick P

It was to catch if the software user shadow stack feature gets disabled
at boot with the "clearcpuid" command.

Quoted 7 lines

I don't understand. clearcpuid does setup_clear_cpu_cap() too. It would
eventually clear the bit in boot_cpu_data.x86_capability's AFAICT.

cpu_feature_enabled() looks at boot_cpu_data too.

So what's the problem?

You are right, there actually is no problem. I thought the apply_forced_caps() was happening too late, but it is not. So this check you highlighted would not be needed if we kept the clearcpuid method.

Thanks.

Quoted 31 lines

Oh, and also, you've added that clearcpuid thing to the help docs. Please remove it. clearcpuid= taints the kernel and we've left it in because some of your colleagues really wanted it for testing or whatnot.
But it is crap and it was on its way out at some point so we better not
proliferate its use any more.

Quoted 1 line

Is there a better way to do this?

Yeah, cpu_feature_enabled() should be enough and if it isn't, then we need to fix it to be.

Which reminds me, I'd need to take Maxim's patch too:

https://lore.kernel.org/r/[email protected]

as it is a simplification.

Quoted 10 lines
Quoted 4 lines

Here you need to do

     setup_clear_cpu_cap(X86_FEATURE_IBT);
     setup_clear_cpu_cap(X86_FEATURE_SHSTK);

This only gets called by kexec way after boot, as kexec is prepping to
transition to the new kernel. Do we want to be clearing feature bits at
that time?

Quoted 3 lines

Hmm, I was under the impression you'll have the usual chicken bit "noshstk" which gets added with every big feature. So it'll call that thing here.

There was at one point, but there was a suggestion to remove in favor of clearcpuid. I can add it back.

maintainer
#10 lore raw

Re: [PATCH v3 04/37] x86/cpufeatures: Enable CET CR4 bit for shadow stack

Quoted 2 lines · Rick P

There was at one point, but there was a suggestion to remove in favor of clearcpuid. I can add it back.

Sounds like I need to school that "suggestor" about clearcpuid. :)

For example, when doing this:

1625c833db93 ("x86/cpu: Allow feature bit names from /proc/cpuinfo in clearcpuid=")

I even managed to prevent the kernel from booting. So clearcpuid= is definitely not for general consumption.

So as said, please remove it from your whole patchset's text.

Thx.

Signature · 4 lines
Regards/Gruss,
    Boris.

https://people.kernel.org/tglx/notes-about-netiquette
#11 lore raw

Re: [PATCH v3 04/37] x86/cpufeatures: Enable CET CR4 bit for shadow stack

Quoted 9 lines · Borislav Petkov
Quoted 3 lines · Rick P

There was at one point, but there was a suggestion to remove in favor
of clearcpuid. I can add it back.

Sounds like I need to school that "suggestor" about clearcpuid. :)

For example, when doing this:

Quoted 7 lines

1625c833db93 ("x86/cpu: Allow feature bit names from /proc/cpuinfo
in clearcpuid=")

I even managed to prevent the kernel from booting. So clearcpuid= is definitely not for general consumption.

So as said, please remove it from your whole patchset's text.

Will do, thanks.

#12 lore raw

PATCH v3 5/37 x86/fpu/xstate: Introduce CET MSR and XSAVES supervisor states

In reply to Rick Edgecombe

From: Yu-cheng Yu <[email protected]>

Shadow stack register state can be managed with XSAVE. The registers can logically be separated into two groups:
* Registers controlling user-mode operation
* Registers controlling kernel-mode operation

The architecture has two new XSAVE state components: one for each group of those groups of registers. This lets an OS manage them separately if it chooses. Future patches for host userspace and KVM guests will only utilize the user-mode registers, so only configure XSAVE to save user-mode registers. This state will add 16 bytes to the xsave buffer size.

Future patches will use the user-mode XSAVE area to save guest user-mode CET state. However, VMCS includes new fields for guest CET supervisor states. KVM can use these to save and restore guest supervisor state, so host supervisor XSAVE support is not required.

Adding this exacerbates the already unwieldy if statement in check_xstate_against_struct() that handles warning about un-implemented xfeatures. So refactor these check's by having XCHECK_SZ() set a bool when it actually check's the xfeature. This ends up exceeding 80 chars, but was better on balance than other options explored. Pass the bool as pointer to make it clear that XCHECK_SZ() can change the variable.

While configuring user-mode XSAVE, clarify kernel-mode registers are not managed by XSAVE by defining the xfeature in XFEATURE_MASK_SUPERVISOR_UNSUPPORTED, like is done for XFEATURE_MASK_PT. This serves more of a documentation as code purpose, and functionally, only enables a few safety checks.

Both XSAVE state components are supervisor states, even the state controlling user-mode operation. This is a departure from earlier features like protection keys where the PKRU state is a normal user (non-supervisor) state. Having the user state be supervisor-managed ensures there is no direct, unprivileged access to it, making it harder for an attacker to subvert CET.

To facilitate this privileged access, define the two user-mode CET MSRs, and the bits defined in those MSRs relevant to future shadow stack enablement patches.

---

v3:
- Add missing "is" in commit log (Boris)
- Change to case statement for struct size checking (Boris)
- Adjust commas on xfeature_names (Kees, Boris)

v2:
- Change name to XFEATURE_CET_KERNEL_UNUSED (peterz)

KVM refresh:
- Reword commit log using some verbiage posted by Dave Hansen
- Remove unlikely to be used supervisor cet xsave struct
- Clarify that supervisor cet state is not saved by xsave
- Remove unused supervisor MSRs

v1:
- Remove outdated reference to sigreturn checks on msr's.

 arch/x86/include/asm/fpu/types.h  | 14 ++++-
 arch/x86/include/asm/fpu/xstate.h |  6 ++-
 arch/x86/kernel/fpu/xstate.c      | 90 +++++++++++++++----------------
 3 files changed, 59 insertions(+), 51 deletions(-)
arch/x86/include/asm/fpu/types.h +12 -2
index eb7cd1139d97..344baad02b97 100644
@@ -115,8 +115,8 @@ enum xfeature {
 	XFEATURE_PT_UNIMPLEMENTED_SO_FAR,
 	XFEATURE_PKRU,
 	XFEATURE_PASID,
-	XFEATURE_RSRVD_COMP_11,
-	XFEATURE_RSRVD_COMP_12,
+	XFEATURE_CET_USER,
+	XFEATURE_CET_KERNEL_UNUSED,
 	XFEATURE_RSRVD_COMP_13,
 	XFEATURE_RSRVD_COMP_14,
 	XFEATURE_LBR,
@@ -138,6 +138,8 @@ enum xfeature {
 #define XFEATURE_MASK_PT		(1 << XFEATURE_PT_UNIMPLEMENTED_SO_FAR)
 #define XFEATURE_MASK_PKRU		(1 << XFEATURE_PKRU)
 #define XFEATURE_MASK_PASID		(1 << XFEATURE_PASID)
+#define XFEATURE_MASK_CET_USER		(1 << XFEATURE_CET_USER)
+#define XFEATURE_MASK_CET_KERNEL	(1 << XFEATURE_CET_KERNEL_UNUSED)
 #define XFEATURE_MASK_LBR		(1 << XFEATURE_LBR)
 #define XFEATURE_MASK_XTILE_CFG		(1 << XFEATURE_XTILE_CFG)
 #define XFEATURE_MASK_XTILE_DATA	(1 << XFEATURE_XTILE_DATA)
@@ -252,6 +254,14 @@ struct pkru_state {
 	u32				pad;
 } __packed;
 
+/*
+ * State component 11 is Control-flow Enforcement user states
+ */
+struct cet_user_state {
+	u64 user_cet;			/* user control-flow settings */
+	u64 user_ssp;			/* user shadow stack pointer */
+};
+
 /*
  * State component 15: Architectural LBR configuration state.
  * The size of Arch LBR state depends on the number of LBRs (lbr_depth).
arch/x86/include/asm/fpu/xstate.h +4 -2
index cd3dd170e23a..d4427b88ee12 100644
@@ -50,7 +50,8 @@
 #define XFEATURE_MASK_USER_DYNAMIC	XFEATURE_MASK_XTILE_DATA
 
 /* All currently supported supervisor features */
-#define XFEATURE_MASK_SUPERVISOR_SUPPORTED (XFEATURE_MASK_PASID)
+#define XFEATURE_MASK_SUPERVISOR_SUPPORTED (XFEATURE_MASK_PASID | \
+					    XFEATURE_MASK_CET_USER)
 
 /*
  * A supervisor state component may not always contain valuable information,
@@ -77,7 +78,8 @@
  * Unsupported supervisor features. When a supervisor feature in this mask is
  * supported in the future, move it to the supported supervisor feature mask.
  */
-#define XFEATURE_MASK_SUPERVISOR_UNSUPPORTED (XFEATURE_MASK_PT)
+#define XFEATURE_MASK_SUPERVISOR_UNSUPPORTED (XFEATURE_MASK_PT | \
+					      XFEATURE_MASK_CET_KERNEL)
 
 /* All supervisor states including supported and unsupported states. */
 #define XFEATURE_MASK_SUPERVISOR_ALL (XFEATURE_MASK_SUPERVISOR_SUPPORTED | \
arch/x86/kernel/fpu/xstate.c +43 -47

138 lines not on this page · raw message

Signature · 1 line
2.17.1
#13 lore raw

PATCH v3 6/37 x86/fpu: Add helper for modifying xstate

In reply to Rick Edgecombe

Just like user xfeatures, supervisor xfeatures can be active in the registers or present in the task FPU buffer. If the registers are active, the registers can be modified directly. If the registers are not active, the modification must be performed on the task FPU buffer.

When the state is not active, the kernel could perform modifications directly to the buffer. But in order for it to do that, it needs to know where in the buffer the specific state it wants to modify is located. Doing this is not robust against optimizations that compact the FPU buffer, as each access would require computing where in the buffer it is.

The easiest way to modify supervisor xfeature data is to force restore the registers and write directly to the MSRs. Often times this is just fine anyway as the registers need to be restored before returning to userspace. Do this for now, leaving buffer writing optimizations for the future.

Add a new function fpregs_lock_and_load() that can simultaneously call fpregs_lock() and do this restore. Also perform some extra sanity checks in this function since this will be used in non-fpu focused code.

---

v3:
- Rename to fpregs_lock_and_load() to match the unlocking fpregs_unlock(). (Kees)
- Elaborate in comment about helper. (Dave)

v2:
- Drop optimization of writing directly the buffer, and change API accordingly.
- fpregs_lock_and_load() suggested by tglx
- Some commit log verbiage from dhansen

v1:
- New patch.

 arch/x86/include/asm/fpu/api.h |  9 +++++++++
 arch/x86/kernel/fpu/core.c     | 19 +++++++++++++++++++
 2 files changed, 28 insertions(+)
arch/x86/include/asm/fpu/api.h +9 -0
index 503a577814b2..aadc6893dcaa 100644
@@ -82,6 +82,15 @@ static inline void fpregs_unlock(void)
 		preempt_enable();
 }
 
+/*
+ * FPU state gets lazily restored before returning to userspace. So when in the
+ * kernel, the valid FPU state may be kept in the buffer. This function will force
+ * restore all the fpu state to the registers early if needed, and lock them from
+ * being automatically saved/restored. Then FPU state can be modified safely in the
+ * registers, before unlocking with fpregs_unlock().
+ */
+void fpregs_lock_and_load(void);
+
 #ifdef CONFIG_X86_DEBUG_FPU
 extern void fpregs_assert_state_consistent(void);
 #else
arch/x86/kernel/fpu/core.c +19 -0
index 3b28c5b25e12..8b3162badab7 100644
@@ -756,6 +756,25 @@ void switch_fpu_return(void)
 }
 EXPORT_SYMBOL_GPL(switch_fpu_return);
 
+void fpregs_lock_and_load(void)
+{
+	/*
+	 * fpregs_lock() only disables preemption (mostly). So modifing state
+	 * in an interrupt could screw up some in progress fpregs operation,
+	 * but appear to work. Warn about it.
+	 */
+	WARN_ON_ONCE(!irq_fpu_usable());
+	WARN_ON_ONCE(current->flags & PF_KTHREAD);
+
+	fpregs_lock();
+
+	fpregs_assert_state_consistent();
+
+	if (test_thread_flag(TIF_NEED_FPU_LOAD))
+		fpregs_restore_userregs();
+}
+EXPORT_SYMBOL_GPL(fpregs_lock_and_load);
+
 #ifdef CONFIG_X86_DEBUG_FPU
 /*
  * If current FPU state according to its tracking (loaded FPU context on this
Signature · 1 line
2.17.1
#14 lore raw

PATCH v3 7/37 x86/cet: Add user control-protection fault handler

In reply to Rick Edgecombe

From: Yu-cheng Yu <[email protected]>

A control-protection fault is triggered when a control-flow transfer attempt violates Shadow Stack or Indirect Branch Tracking constraints. For example, the return address for a RET instruction differs from the copy on the shadow stack.

There already exists a control-protection fault handler for handling kernel IBT. Refactor this fault handler into sparate user and kernel handlers, like the page fault handler. Add a control-protection handler for usermode.

Keep the same behavior for the kernel side of the fault handler, except for converting a BUG to a WARN in the case of a #CP happening when !cpu_feature_enabled(). This unifies the behavior with the new shadow stack code, and also prevents the kernel from crashing under this situation which is potentially recoverable.

The control-protection fault handler works in a similar way as the general protection fault handler. It provides the si_code SEGV_CPERR to the signal handler.

---

v3:
- Shorten user/kernel #CP handler function names (peterz)
- Restore CP_ENDBR check to kernel handler (peterz)
- Utilize CONFIG_X86_CET (Kees)
- Unify "unexpected" warnings (Andrew Cooper)
- Use 2d array for error code chars (Andrew Cooper)
- Add comment about why to read SSP MSR before enabling interrupts

v2:
- Integrate with kernel IBT fault handler
- Update printed messages. (Dave)
- Remove array_index_nospec() usage. (Dave)
- Remove IBT messages. (Dave)
- Add enclave error code bit processing it case it can get triggered somehow.
- Add extra "unknown" in control_protection_err.

v1:
- Update static asserts for NSIGSEGV

Yu-cheng v29:
- Remove pr_emerg() since it is followed by die().
- Change boot_cpu_has() to cpu_feature_enabled().

 arch/arm/kernel/signal.c                 |   2 +-
 arch/arm64/kernel/signal.c               |   2 +-
 arch/arm64/kernel/signal32.c             |   2 +-
 arch/sparc/kernel/signal32.c             |   2 +-
 arch/sparc/kernel/signal_64.c            |   2 +-
 arch/x86/include/asm/disabled-features.h |   8 +-
 arch/x86/include/asm/idtentry.h          |   2 +-
 arch/x86/kernel/idt.c                    |   2 +-
 arch/x86/kernel/signal_compat.c          |   2 +-
 arch/x86/kernel/traps.c                  | 107 ++++++++++++++++++++---
 arch/x86/xen/enlighten_pv.c              |   2 +-
 arch/x86/xen/xen-asm.S                   |   2 +-
 include/uapi/asm-generic/siginfo.h       |   3 +-
 13 files changed, 114 insertions(+), 24 deletions(-)
arch/arm/kernel/signal.c +1 -1
index e07f359254c3..9a3c9de5ac5e 100644
@@ -681,7 +681,7 @@ asmlinkage void do_rseq_syscall(struct pt_regs *regs)
  */
 static_assert(NSIGILL	== 11);
 static_assert(NSIGFPE	== 15);
-static_assert(NSIGSEGV	== 9);
+static_assert(NSIGSEGV	== 10);
 static_assert(NSIGBUS	== 5);
 static_assert(NSIGTRAP	== 6);
 static_assert(NSIGCHLD	== 6);
arch/arm64/kernel/signal.c +1 -1
index 9ad911f1647c..81b13a21046e 100644
@@ -1166,7 +1166,7 @@ void __init minsigstksz_setup(void)
  */
 static_assert(NSIGILL	== 11);
 static_assert(NSIGFPE	== 15);
-static_assert(NSIGSEGV	== 9);
+static_assert(NSIGSEGV	== 10);
 static_assert(NSIGBUS	== 5);
 static_assert(NSIGTRAP	== 6);
 static_assert(NSIGCHLD	== 6);
arch/arm64/kernel/signal32.c +1 -1
index 4700f8522d27..bbd542704730 100644
@@ -460,7 +460,7 @@ void compat_setup_restart_syscall(struct pt_regs *regs)
  */
 static_assert(NSIGILL	== 11);
 static_assert(NSIGFPE	== 15);
-static_assert(NSIGSEGV	== 9);
+static_assert(NSIGSEGV	== 10);
 static_assert(NSIGBUS	== 5);
 static_assert(NSIGTRAP	== 6);
 static_assert(NSIGCHLD	== 6);
arch/sparc/kernel/signal32.c +1 -1
index dad38960d1a8..82da8a2d769d 100644
@@ -751,7 +751,7 @@ asmlinkage int do_sys32_sigstack(u32 u_ssptr, u32 u_ossptr, unsigned long sp)
  */
 static_assert(NSIGILL	== 11);
 static_assert(NSIGFPE	== 15);
-static_assert(NSIGSEGV	== 9);
+static_assert(NSIGSEGV	== 10);
 static_assert(NSIGBUS	== 5);
 static_assert(NSIGTRAP	== 6);
 static_assert(NSIGCHLD	== 6);
arch/sparc/kernel/signal_64.c +1 -1
index 570e43e6fda5..b4e410976e0d 100644
@@ -562,7 +562,7 @@ void do_notify_resume(struct pt_regs *regs, unsigned long orig_i0, unsigned long
  */
 static_assert(NSIGILL	== 11);
 static_assert(NSIGFPE	== 15);
-static_assert(NSIGSEGV	== 9);
+static_assert(NSIGSEGV	== 10);
 static_assert(NSIGBUS	== 5);
 static_assert(NSIGTRAP	== 6);
 static_assert(NSIGCHLD	== 6);
arch/x86/include/asm/disabled-features.h +7 -1
index 30cd12905499..5ff93b8165ed 100644
@@ -93,6 +93,12 @@
 #define DISABLE_USER_SHSTK	(1 << (X86_FEATURE_USER_SHSTK & 31))
 #endif
 
+#ifdef CONFIG_X86_KERNEL_IBT
+#define DISABLE_IBT	0
+#else
+#define DISABLE_IBT	(1 << (X86_FEATURE_IBT & 31))
+#endif
+
 /*
  * Make sure to add features to the correct mask
  */
@@ -116,7 +122,7 @@
 #define DISABLED_MASK16	(DISABLE_PKU|DISABLE_OSPKE|DISABLE_LA57|DISABLE_UMIP| \
 			 DISABLE_ENQCMD)
 #define DISABLED_MASK17	0
-#define DISABLED_MASK18	0
+#define DISABLED_MASK18	(DISABLE_IBT)
 #define DISABLED_MASK19	0
 #define DISABLED_MASK_CHECK BUILD_BUG_ON_ZERO(NCAPINTS != 20)
 
arch/x86/include/asm/idtentry.h +1 -1
index 72184b0b2219..69e26f48d027 100644
@@ -618,7 +618,7 @@ DECLARE_IDTENTRY_RAW_ERRORCODE(X86_TRAP_DF,	xenpv_exc_double_fault);
 #endif
 
 /* #CP */
-#ifdef CONFIG_X86_KERNEL_IBT
+#ifdef CONFIG_X86_CET
 DECLARE_IDTENTRY_ERRORCODE(X86_TRAP_CP,	exc_control_protection);
 #endif
 
arch/x86/kernel/idt.c +1 -1
index a58c6bc1cd68..5074b8420359 100644
@@ -107,7 +107,7 @@ static const __initconst struct idt_data def_idts[] = {
 	ISTG(X86_TRAP_MC,		asm_exc_machine_check, IST_INDEX_MCE),
 #endif
 
-#ifdef CONFIG_X86_KERNEL_IBT
+#ifdef CONFIG_X86_CET
 	INTG(X86_TRAP_CP,		asm_exc_control_protection),
 #endif
 
arch/x86/kernel/signal_compat.c +1 -1
index 879ef8c72f5c..d441804443d5 100644
@@ -27,7 +27,7 @@ static inline void signal_compat_build_tests(void)
 	 */
 	BUILD_BUG_ON(NSIGILL  != 11);
 	BUILD_BUG_ON(NSIGFPE  != 15);
-	BUILD_BUG_ON(NSIGSEGV != 9);
+	BUILD_BUG_ON(NSIGSEGV != 10);
 	BUILD_BUG_ON(NSIGBUS  != 5);
 	BUILD_BUG_ON(NSIGTRAP != 6);
 	BUILD_BUG_ON(NSIGCHLD != 6);
arch/x86/kernel/traps.c +95 -12

131 lines not on this page · raw message

arch/x86/xen/enlighten_pv.c +1 -1
index f82857e48815..cf4ee15e956e 100644
@@ -638,7 +638,7 @@ static struct trap_array_entry trap_array[] = {
 	TRAP_ENTRY(exc_coprocessor_error,		false ),
 	TRAP_ENTRY(exc_alignment_check,			false ),
 	TRAP_ENTRY(exc_simd_coprocessor_error,		false ),
-#ifdef CONFIG_X86_KERNEL_IBT
+#ifdef CONFIG_X86_CET
 	TRAP_ENTRY(exc_control_protection,		false ),
 #endif
 };
arch/x86/xen/xen-asm.S +1 -1
index 6b4fdf6b9542..32f1b05b7a3c 100644
@@ -148,7 +148,7 @@ xen_pv_trap asm_exc_page_fault
 xen_pv_trap asm_exc_spurious_interrupt_bug
 xen_pv_trap asm_exc_coprocessor_error
 xen_pv_trap asm_exc_alignment_check
-#ifdef CONFIG_X86_KERNEL_IBT
+#ifdef CONFIG_X86_CET
 xen_pv_trap asm_exc_control_protection
 #endif
 #ifdef CONFIG_X86_MCE
include/uapi/asm-generic/siginfo.h +2 -1
index ffbe4cec9f32..0f52d0ac47c5 100644
@@ -242,7 +242,8 @@ typedef struct siginfo {
 #define SEGV_ADIPERR	7	/* Precise MCD exception */
 #define SEGV_MTEAERR	8	/* Asynchronous ARM MTE error */
 #define SEGV_MTESERR	9	/* Synchronous ARM MTE exception */
-#define NSIGSEGV	9
+#define SEGV_CPERR	10	/* Control protection fault */
+#define NSIGSEGV	10
 
 /*
  * SIGBUS si_codes
Signature · 1 line
2.17.1
#15 lore raw

PATCH v3 8/37 x86/mm: Remove _PAGE_DIRTY from kernel RO pages

In reply to Rick Edgecombe

From: Yu-cheng Yu <[email protected]>

New processors that support Shadow Stack regard Write=0,Dirty=1 PTEs as shadow stack pages.

In normal cases, it can be helpful to create Write=1 PTEs as also Dirty=1 if HW dirty tracking is not needed, because if the Dirty bit is not already set the CPU has to set Dirty=1 when it the memory gets written to. This creates addiontal work for the CPU. So tradional wisdom was to simply set the Dirty bit whenever you didn't care about it. However, it was never really very helpful for read only kernel memory.

When CR4.CET=1 and IA32_S_CET.SH_STK_EN=1, some instructions can write to such supervisor memory. The kernel does not set IA32_S_CET.SH_STK_EN, so avoiding kernel Write=0,Dirty=1 memory is not strictly needed for any functional reason. But having Write=0,Dirty=1 kernel memory doesn't have any functional benefit either, so to reduce ambiguity between shadow stack and regular Write=0 pages, removed Dirty=1 from any kernel Write=0 PTEs.

Cc "H. Peter Anvin" <[email protected]>
Cc Kees Cook <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Dave Hansen <[email protected]>
Cc Christoph Hellwig <[email protected]>
Cc Andy Lutomirski <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Borislav Petkov <[email protected]>
Cc Peter Zijlstra <[email protected]>

---

v3:
- Update commit log (Andrew Cooper, Peterz)

v2:
- Normalize PTE bit descriptions between patches

 arch/x86/include/asm/pgtable_types.h | 6 +++---
 arch/x86/mm/pat/set_memory.c         | 2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)
arch/x86/include/asm/pgtable_types.h +3 -3
index aa174fed3a71..ff82237e7b6b 100644
@@ -192,10 +192,10 @@ enum page_cache_mode {
 #define _KERNPG_TABLE		 (__PP|__RW|   0|___A|   0|___D|   0|   0| _ENC)
 #define _PAGE_TABLE_NOENC	 (__PP|__RW|_USR|___A|   0|___D|   0|   0)
 #define _PAGE_TABLE		 (__PP|__RW|_USR|___A|   0|___D|   0|   0| _ENC)
-#define __PAGE_KERNEL_RO	 (__PP|   0|   0|___A|__NX|___D|   0|___G)
-#define __PAGE_KERNEL_ROX	 (__PP|   0|   0|___A|   0|___D|   0|___G)
+#define __PAGE_KERNEL_RO	 (__PP|   0|   0|___A|__NX|   0|   0|___G)
+#define __PAGE_KERNEL_ROX	 (__PP|   0|   0|___A|   0|   0|   0|___G)
 #define __PAGE_KERNEL_NOCACHE	 (__PP|__RW|   0|___A|__NX|___D|   0|___G| __NC)
-#define __PAGE_KERNEL_VVAR	 (__PP|   0|_USR|___A|__NX|___D|   0|___G)
+#define __PAGE_KERNEL_VVAR	 (__PP|   0|_USR|___A|__NX|   0|   0|___G)
 #define __PAGE_KERNEL_LARGE	 (__PP|__RW|   0|___A|__NX|___D|_PSE|___G)
 #define __PAGE_KERNEL_LARGE_EXEC (__PP|__RW|   0|___A|   0|___D|_PSE|___G)
 #define __PAGE_KERNEL_WP	 (__PP|__RW|   0|___A|__NX|___D|   0|___G| __WP)
arch/x86/mm/pat/set_memory.c +1 -1
index 2e5a045731de..af2267a9cdab 100644
@@ -2026,7 +2026,7 @@ int set_memory_nx(unsigned long addr, int numpages)
 
 int set_memory_ro(unsigned long addr, int numpages)
 {
-	return change_page_attr_clear(&addr, numpages, __pgprot(_PAGE_RW), 0);
+	return change_page_attr_clear(&addr, numpages, __pgprot(_PAGE_RW | _PAGE_DIRTY), 0);
 }
 
 int set_memory_rw(unsigned long addr, int numpages)
Signature · 1 line
2.17.1
#16 lore raw

PATCH v3 9/37 x86/mm: Move pmd_write(), pud_write() up in the file

In reply to Rick Edgecombe

From: Yu-cheng Yu <[email protected]>

To prepare the introduction of _PAGE_COW, move pmd_write() and pud_write() up in the file, so that they can be used by other helpers below. No functional changes.

---
 arch/x86/include/asm/pgtable.h | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)
arch/x86/include/asm/pgtable.h +12 -12
index 5059799bebe3..a1d6f121ee35 100644
@@ -159,6 +159,18 @@ static inline int pte_write(pte_t pte)
 	return pte_flags(pte) & _PAGE_RW;
 }
 
+#define pmd_write pmd_write
+static inline int pmd_write(pmd_t pmd)
+{
+	return pmd_flags(pmd) & _PAGE_RW;
+}
+
+#define pud_write pud_write
+static inline int pud_write(pud_t pud)
+{
+	return pud_flags(pud) & _PAGE_RW;
+}
+
 static inline int pte_huge(pte_t pte)
 {
 	return pte_flags(pte) & _PAGE_PSE;
@@ -1103,12 +1115,6 @@ extern int pmdp_clear_flush_young(struct vm_area_struct *vma,
 				  unsigned long address, pmd_t *pmdp);
 
 
-#define pmd_write pmd_write
-static inline int pmd_write(pmd_t pmd)
-{
-	return pmd_flags(pmd) & _PAGE_RW;
-}
-
 #define __HAVE_ARCH_PMDP_HUGE_GET_AND_CLEAR
 static inline pmd_t pmdp_huge_get_and_clear(struct mm_struct *mm, unsigned long addr,
 				       pmd_t *pmdp)
@@ -1138,12 +1144,6 @@ static inline void pmdp_set_wrprotect(struct mm_struct *mm,
 	clear_bit(_PAGE_BIT_RW, (unsigned long *)pmdp);
 }
 
-#define pud_write pud_write
-static inline int pud_write(pud_t pud)
-{
-	return pud_flags(pud) & _PAGE_RW;
-}
-
 #ifndef pmdp_establish
 #define pmdp_establish pmdp_establish
 static inline pmd_t pmdp_establish(struct vm_area_struct *vma,
Signature · 1 line
2.17.1
#17 lore raw

PATCH v3 10/37 x86/mm: Introduce _PAGE_COW

In reply to Rick Edgecombe

From: Yu-cheng Yu <[email protected]>

Some OSes have a greater dependence on software available bits in PTEs than Linux. That left the hardware architects looking for a way to represent a new memory type (shadow stack) within the existing bits. They chose to repurpose a lightly-used state: Write=0,Dirty=1. So in order to support shadow stack memory, Linux should avoid creating memory with this PTE bit combination unless it intends for it to be shadow stack.

The reason it's lightly used is that Dirty=1 is normally set by HW _before_ a write. A write with a Write=0 PTE would typically only generate a fault, not set Dirty=1. Hardware can (rarely) both set Dirty=1 *and* generate the fault, resulting in a Write=0,Dirty=1 PTE. Hardware which supports shadow stacks will no longer exhibit this oddity.

So that leaves Write=0,Dirty=1 PTEs created in software. To achieve this, in places where Linux normally creates Write=0,Dirty=1, it can use the software-defined _PAGE_COW in place of the hardware _PAGE_DIRTY. In other words, whenever Linux needs to create Write=0,Dirty=1, it instead creates Write=0,Cow=1 except for shadow stack, which is Write=0,Dirty=1. Further differentiated by VMA flags, these PTE bit combinations would be set as follows for various types of memory:

(Write=0,Cow=1,Dirty=0):
- A modified, copy-on-write (COW) page. Previously when a typical anonymous writable mapping was made COW via fork(), the kernel would mark it Write=0,Dirty=1. Now it will instead use the Cow bit. This happens in copy_present_pte().
- A R/O page that has been COW'ed. The user page is in a R/O VMA, and get_user_pages(FOLL_FORCE) needs a writable copy. The page fault handler creates a copy of the page and sets the new copy's PTE as Write=0 and Cow=1.
- A shared shadow stack PTE. When a shadow stack page is being shared among processes (this happens at fork()), its PTE is made Dirty=0, so the next shadow stack access causes a fault, and the page is duplicated and Dirty=1 is set again. This is the COW equivalent for shadow stack pages, even though it's copy-on-access rather than copy-on-write.

(Write=0,Cow=0,Dirty=1):
- A shadow stack PTE.
- A Cow PTE created when a processor without shadow stack support set Dirty=1.

Define _PAGE_COW and update pte_*() helpers and apply the same changes to pmd and pud.

There are six bits left available to software in the 64-bit PTE after consuming a bit for _PAGE_COW. No space is consumed in 32-bit kernels because shadow stacks are not enabled there.

---

v3:
- Add comment around _PAGE_TABLE in response to comment from (Andrew Cooper)
- Check for PSE in pmd_shstk (Andrew Cooper)
- Get to the point quicker in commit log (Andrew Cooper)
- Clarify and reorder commit log for why the PTE bit examples have multiple entries. Apply same changes for comment. (peterz)
- Fix comment that implied dirty bit for COW was a specific x86 thing (peterz)
- Fix swapping of Write/Dirty (PeterZ)

v2:
- Update commit log with comments (Dave Hansen)
- Add comments in code to explain pte modification code better (Dave)
- Clarify info on the meaning of various Write,Cow,Dirty combinations

 arch/x86/include/asm/pgtable.h       | 211 ++++++++++++++++++++++++---
 arch/x86/include/asm/pgtable_types.h |  59 +++++++-
 2 files changed, 245 insertions(+), 25 deletions(-)
arch/x86/include/asm/pgtable.h +191 -20
index a1d6f121ee35..c284bb6f62a5 100644
@@ -124,9 +124,17 @@ extern pmdval_t early_pmd_flags;
  * The following only work if pte_present() is true.
  * Undefined behaviour if not..
  */
-static inline int pte_dirty(pte_t pte)
+static inline bool pte_dirty(pte_t pte)
 {
-	return pte_flags(pte) & _PAGE_DIRTY;
+	return pte_flags(pte) & _PAGE_DIRTY_BITS;
+}
+
+static inline bool pte_shstk(pte_t pte)
+{
+	if (!cpu_feature_enabled(X86_FEATURE_USER_SHSTK))
+		return false;
+
+	return (pte_flags(pte) & (_PAGE_RW | _PAGE_DIRTY)) == _PAGE_DIRTY;
 }
 
 static inline int pte_young(pte_t pte)
@@ -134,9 +142,18 @@ static inline int pte_young(pte_t pte)
 	return pte_flags(pte) & _PAGE_ACCESSED;
 }
 
-static inline int pmd_dirty(pmd_t pmd)
+static inline bool pmd_dirty(pmd_t pmd)
 {
-	return pmd_flags(pmd) & _PAGE_DIRTY;
+	return pmd_flags(pmd) & _PAGE_DIRTY_BITS;
+}
+
+static inline bool pmd_shstk(pmd_t pmd)
+{
+	if (!cpu_feature_enabled(X86_FEATURE_USER_SHSTK))
+		return false;
+
+	return (pmd_flags(pmd) & (_PAGE_RW | _PAGE_DIRTY | _PAGE_PSE)) ==
+	       (_PAGE_DIRTY | _PAGE_PSE);
 }
 
 static inline int pmd_young(pmd_t pmd)
@@ -144,9 +161,9 @@ static inline int pmd_young(pmd_t pmd)
 	return pmd_flags(pmd) & _PAGE_ACCESSED;
 }
 
-static inline int pud_dirty(pud_t pud)
+static inline bool pud_dirty(pud_t pud)
 {
-	return pud_flags(pud) & _PAGE_DIRTY;
+	return pud_flags(pud) & _PAGE_DIRTY_BITS;
 }
 
 static inline int pud_young(pud_t pud)
@@ -156,13 +173,21 @@ static inline int pud_young(pud_t pud)
 
 static inline int pte_write(pte_t pte)
 {
-	return pte_flags(pte) & _PAGE_RW;
+	/*
+	 * Shadow stack pages are logically writable, but do not have
+	 * _PAGE_RW.  Check for them separately from _PAGE_RW itself.
+	 */
+	return (pte_flags(pte) & _PAGE_RW) || pte_shstk(pte);
 }
 
 #define pmd_write pmd_write
 static inline int pmd_write(pmd_t pmd)
 {
-	return pmd_flags(pmd) & _PAGE_RW;
+	/*
+	 * Shadow stack pages are logically writable, but do not have
+	 * _PAGE_RW.  Check for them separately from _PAGE_RW itself.
+	 */
+	return (pmd_flags(pmd) & _PAGE_RW) || pmd_shstk(pmd);
 }
 
 #define pud_write pud_write
@@ -300,6 +325,44 @@ static inline pte_t pte_clear_flags(pte_t pte, pteval_t clear)
 	return native_make_pte(v & ~clear);
 }
 
+/*
+ * Normally COW memory can result in Dirty=1,Write=0 PTs. But in the case
+ * of X86_FEATURE_USER_SHSTK, the software COW bit is used, since the
+ * Dirty=1,Write=0 will result in the memory being treated as shaodw stack
+ * by the HW. So when creating COW memory, a software bit is used
+ * _PAGE_BIT_COW. The following functions pte_mkcow() and pte_clear_cow()
+ * take a PTE marked conventially COW (Dirty=1) and transition it to the
+ * shadow stack compatible version of COW (Cow=1).
+ */
+
+static inline pte_t pte_mkcow(pte_t pte)
+{
+	if (!cpu_feature_enabled(X86_FEATURE_USER_SHSTK))
+		return pte;
+
+	pte = pte_clear_flags(pte, _PAGE_DIRTY);
+	return pte_set_flags(pte, _PAGE_COW);
+}
+
+static inline pte_t pte_clear_cow(pte_t pte)
+{
+	/*
+	 * _PAGE_COW is unnecessary on !X86_FEATURE_USER_SHSTK kernels.
+	 * See the _PAGE_COW definition for more details.
+	 */
+	if (!cpu_feature_enabled(X86_FEATURE_USER_SHSTK))
+		return pte;
+
+	/*
+	 * PTE is getting copied-on-write, so it will be dirtied
+	 * if writable, or made shadow stack if shadow stack and
+	 * being copied on access. Set they dirty bit for both
+	 * cases.
+	 */
+	pte = pte_set_flags(pte, _PAGE_DIRTY);
+	return pte_clear_flags(pte, _PAGE_COW);
+}
+
 #ifdef CONFIG_HAVE_ARCH_USERFAULTFD_WP
 static inline int pte_uffd_wp(pte_t pte)
 {
@@ -319,7 +382,7 @@ static inline pte_t pte_clear_uffd_wp(pte_t pte)
 
 static inline pte_t pte_mkclean(pte_t pte)
 {
-	return pte_clear_flags(pte, _PAGE_DIRTY);
+	return pte_clear_flags(pte, _PAGE_DIRTY_BITS);
 }
 
 static inline pte_t pte_mkold(pte_t pte)
@@ -329,7 +392,16 @@ static inline pte_t pte_mkold(pte_t pte)
 
 static inline pte_t pte_wrprotect(pte_t pte)
 {
-	return pte_clear_flags(pte, _PAGE_RW);
+	pte = pte_clear_flags(pte, _PAGE_RW);
+
+	/*
+	 * Blindly clearing _PAGE_RW might accidentally create
+	 * a shadow stack PTE (Write=0,Dirty=1). Move the hardware
+	 * dirty value to the software bit.
+	 */
+	if (pte_dirty(pte))
+		pte = pte_mkcow(pte);
+	return pte;
 }
 
 static inline pte_t pte_mkexec(pte_t pte)
@@ -339,7 +411,19 @@ static inline pte_t pte_mkexec(pte_t pte)
 
 static inline pte_t pte_mkdirty(pte_t pte)
 {
-	return pte_set_flags(pte, _PAGE_DIRTY | _PAGE_SOFT_DIRTY);
+	pteval_t dirty = _PAGE_DIRTY;
+
+	/* Avoid creating Dirty=1,Write=0 PTEs */
+	if (cpu_feature_enabled(X86_FEATURE_USER_SHSTK) && !pte_write(pte))
+		dirty = _PAGE_COW;
+
+	return pte_set_flags(pte, dirty | _PAGE_SOFT_DIRTY);
+}
+
+static inline pte_t pte_mkwrite_shstk(pte_t pte)
+{
+	/* pte_clear_cow() also sets Dirty=1 */
+	return pte_clear_cow(pte);
 }
 
 static inline pte_t pte_mkyoung(pte_t pte)
@@ -349,7 +433,12 @@ static inline pte_t pte_mkyoung(pte_t pte)
 
 static inline pte_t pte_mkwrite(pte_t pte)
 {
-	return pte_set_flags(pte, _PAGE_RW);
+	pte = pte_set_flags(pte, _PAGE_RW);
+
+	if (pte_dirty(pte))
+		pte = pte_clear_cow(pte);
+
+	return pte;
 }
 
 static inline pte_t pte_mkhuge(pte_t pte)
@@ -396,6 +485,26 @@ static inline pmd_t pmd_clear_flags(pmd_t pmd, pmdval_t clear)
 	return native_make_pmd(v & ~clear);
 }
 
+/* See comments above pte_mkcow() */
+static inline pmd_t pmd_mkcow(pmd_t pmd)
+{
+	if (!cpu_feature_enabled(X86_FEATURE_USER_SHSTK))
+		return pmd;
+
+	pmd = pmd_clear_flags(pmd, _PAGE_DIRTY);
+	return pmd_set_flags(pmd, _PAGE_COW);
+}
+
+/* See comments above pte_mkcow() */
+static inline pmd_t pmd_clear_cow(pmd_t pmd)
+{
+	if (!cpu_feature_enabled(X86_FEATURE_USER_SHSTK))
+		return pmd;
+
+	pmd = pmd_set_flags(pmd, _PAGE_DIRTY);
+	return pmd_clear_flags(pmd, _PAGE_COW);
+}
+
 #ifdef CONFIG_HAVE_ARCH_USERFAULTFD_WP
 static inline int pmd_uffd_wp(pmd_t pmd)
 {
@@ -420,17 +529,36 @@ static inline pmd_t pmd_mkold(pmd_t pmd)
 
 static inline pmd_t pmd_mkclean(pmd_t pmd)
 {
-	return pmd_clear_flags(pmd, _PAGE_DIRTY);
+	return pmd_clear_flags(pmd, _PAGE_DIRTY_BITS);
 }
 
 static inline pmd_t pmd_wrprotect(pmd_t pmd)
 {
-	return pmd_clear_flags(pmd, _PAGE_RW);
+	pmd = pmd_clear_flags(pmd, _PAGE_RW);
+	/*
+	 * Blindly clearing _PAGE_RW might accidentally create
+	 * a shadow stack PMD (RW=0, Dirty=1). Move the hardware
+	 * dirty value to the software bit.
+	 */
+	if (pmd_dirty(pmd))
+		pmd = pmd_mkcow(pmd);
+	return pmd;
 }
 
 static inline pmd_t pmd_mkdirty(pmd_t pmd)
 {
-	return pmd_set_flags(pmd, _PAGE_DIRTY | _PAGE_SOFT_DIRTY);
+	pmdval_t dirty = _PAGE_DIRTY;
+
+	/* Avoid creating (HW)Dirty=1, Write=0 PMDs */
+	if (cpu_feature_enabled(X86_FEATURE_USER_SHSTK) && !pmd_write(pmd))
+		dirty = _PAGE_COW;
+
+	return pmd_set_flags(pmd, dirty | _PAGE_SOFT_DIRTY);
+}
+
+static inline pmd_t pmd_mkwrite_shstk(pmd_t pmd)
+{
+	return pmd_clear_cow(pmd);
 }
 
 static inline pmd_t pmd_mkdevmap(pmd_t pmd)
@@ -450,7 +578,11 @@ static inline pmd_t pmd_mkyoung(pmd_t pmd)
 
 static inline pmd_t pmd_mkwrite(pmd_t pmd)
 {
-	return pmd_set_flags(pmd, _PAGE_RW);
+	pmd = pmd_set_flags(pmd, _PAGE_RW);
+
+	if (pmd_dirty(pmd))
+		pmd = pmd_clear_cow(pmd);
+	return pmd;
 }
 
 static inline pud_t pud_set_flags(pud_t pud, pudval_t set)
@@ -467,6 +599,26 @@ static inline pud_t pud_clear_flags(pud_t pud, pudval_t clear)
 	return native_make_pud(v & ~clear);
 }
 
+/* See comments above pte_mkcow() */
+static inline pud_t pud_mkcow(pud_t pud)
+{
+	if (!cpu_feature_enabled(X86_FEATURE_USER_SHSTK))
+		return pud;
+
+	pud = pud_clear_flags(pud, _PAGE_DIRTY);
+	return pud_set_flags(pud, _PAGE_COW);
+}
+
+/* See comments above pte_mkcow() */
+static inline pud_t pud_clear_cow(pud_t pud)
+{
+	if (!cpu_feature_enabled(X86_FEATURE_USER_SHSTK))
+		return pud;
+
+	pud = pud_set_flags(pud, _PAGE_DIRTY);
+	return pud_clear_flags(pud, _PAGE_COW);
+}
+
 static inline pud_t pud_mkold(pud_t pud)
 {
 	return pud_clear_flags(pud, _PAGE_ACCESSED);
@@ -474,17 +626,32 @@ static inline pud_t pud_mkold(pud_t pud)
 
 static inline pud_t pud_mkclean(pud_t pud)
 {
-	return pud_clear_flags(pud, _PAGE_DIRTY);
+	return pud_clear_flags(pud, _PAGE_DIRTY_BITS);
 }
 
 static inline pud_t pud_wrprotect(pud_t pud)
 {
-	return pud_clear_flags(pud, _PAGE_RW);
+	pud = pud_clear_flags(pud, _PAGE_RW);
+
+	/*
+	 * Blindly clearing _PAGE_RW might accidentally create
+	 * a shadow stack PUD (RW=0, Dirty=1). Move the hardware
+	 * dirty value to the software bit.
+	 */
+	if (pud_dirty(pud))
+		pud = pud_mkcow(pud);
+	return pud;
 }
 
 static inline pud_t pud_mkdirty(pud_t pud)
 {
-	return pud_set_flags(pud, _PAGE_DIRTY | _PAGE_SOFT_DIRTY);
+	pudval_t dirty = _PAGE_DIRTY;
+
+	/* Avoid creating (HW)Dirty=1, Write=0 PUDs */
+	if (cpu_feature_enabled(X86_FEATURE_USER_SHSTK) && !pud_write(pud))
+		dirty = _PAGE_COW;
+
+	return pud_set_flags(pud, dirty | _PAGE_SOFT_DIRTY);
 }
 
 static inline pud_t pud_mkdevmap(pud_t pud)
@@ -504,7 +671,11 @@ static inline pud_t pud_mkyoung(pud_t pud)
 
 static inline pud_t pud_mkwrite(pud_t pud)
 {
-	return pud_set_flags(pud, _PAGE_RW);
+	pud = pud_set_flags(pud, _PAGE_RW);
+
+	if (pud_dirty(pud))
+		pud = pud_clear_cow(pud);
+	return pud;
 }
 
 #ifdef CONFIG_HAVE_ARCH_SOFT_DIRTY
arch/x86/include/asm/pgtable_types.h +54 -5

85 lines not on this page · raw message

Signature · 1 line
2.17.1
#18 lore raw

PATCH v3 11/37 x86/mm: Update pte_modify for _PAGE_COW

In reply to Rick Edgecombe

From: Yu-cheng Yu <[email protected]>

The Write=0,Dirty=1 PTE has been used to indicate copy-on-write pages. However, newer x86 processors also regard a Write=0,Dirty=1 PTE as a shadow stack page. In order to separate the two, the software-defined _PAGE_DIRTY is changed to _PAGE_COW for the copy-on-write case, and pte_*() are updated to do this.

pte_modify() takes a "raw" pgprot_t which was not necessarily created with any of the existing PTE bit helpers. That means that it can return a pte_t with Write=0,Dirty=1, a shadow stack PTE, when it did not intend to create one.

However pte_modify() changes a PTE to 'newprot', but it doesn't use the pte_*(). Modify it to also move _PAGE_DIRTY to _PAGE_COW. Apply the same changes to pmd_modify().

---

v2:
- Update commit log with text and suggestions from (Dave Hansen)
- Drop fixup_dirty_pte() in favor of clearing the HW dirty bit along with the _PAGE_CHG_MASK masking, then calling pte_mkdirty() (Dave Hansen)

 arch/x86/include/asm/pgtable.h | 41 +++++++++++++++++++++++++++++-----
 1 file changed, 35 insertions(+), 6 deletions(-)
arch/x86/include/asm/pgtable.h +35 -6
index c284bb6f62a5..81f388a5a5ab 100644
@@ -791,26 +791,55 @@ static inline u64 flip_protnone_guard(u64 oldval, u64 val, u64 mask);
 
 static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 {
+	pteval_t _page_chg_mask_no_dirty = _PAGE_CHG_MASK & ~_PAGE_DIRTY;
 	pteval_t val = pte_val(pte), oldval = val;
+	pte_t pte_result;
 
 	/*
 	 * Chop off the NX bit (if present), and add the NX portion of
 	 * the newprot (if present):
 	 */
-	val &= _PAGE_CHG_MASK;
-	val |= check_pgprot(newprot) & ~_PAGE_CHG_MASK;
+	val &= _page_chg_mask_no_dirty;
+	val |= check_pgprot(newprot) & ~_page_chg_mask_no_dirty;
 	val = flip_protnone_guard(oldval, val, PTE_PFN_MASK);
-	return __pte(val);
+
+	pte_result = __pte(val);
+
+	/*
+	 * Dirty bit is not preserved above so it can be done
+	 * in a special way for the shadow stack case, where it
+	 * needs to set _PAGE_COW. pte_mkdirty() will do this in
+	 * the case of shadow stack.
+	 */
+	if (pte_dirty(pte))
+		pte_result = pte_mkdirty(pte_result);
+
+	return pte_result;
 }
 
 static inline pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot)
 {
+	pteval_t _hpage_chg_mask_no_dirty = _HPAGE_CHG_MASK & ~_PAGE_DIRTY;
 	pmdval_t val = pmd_val(pmd), oldval = val;
+	pmd_t pmd_result;
 
-	val &= _HPAGE_CHG_MASK;
-	val |= check_pgprot(newprot) & ~_HPAGE_CHG_MASK;
+	val &= _hpage_chg_mask_no_dirty;
+	val |= check_pgprot(newprot) & ~_hpage_chg_mask_no_dirty;
 	val = flip_protnone_guard(oldval, val, PHYSICAL_PMD_PAGE_MASK);
-	return __pmd(val);
+
+
+	pmd_result = __pmd(val);
+
+	/*
+	 * Dirty bit is not preserved above so it can be done
+	 * specially for the shadow stack case. It needs to move
+	 * the HW dirty bit to the software COW bit. Set in the
+	 * result if it was set in the original value.
+	 */
+	if (pmd_dirty(pmd))
+		pmd_result = pmd_mkdirty(pmd_result);
+
+	return pmd_result;
 }
 
 /*
Signature · 1 line
2.17.1
#19 lore raw

PATCH v3 12/37 x86/mm: Update ptep_set_wrprotect() and pmdp_set_wrprotect() for transition from _PAGE_DIRTY to _PAGE_COW

In reply to Rick Edgecombe

From: Yu-cheng Yu <[email protected]>

When Shadow Stack is in use, Write=0,Dirty=1 PTE are reserved for shadow stack. Copy-on-write PTes then have Write=0,Cow=1.

When a PTE goes from Write=1,Dirty=1 to Write=0,Cow=1, it could become a transient shadow stack PTE in two cases:

The first case is that some processors can start a write but end up seeing a Write=0 PTE by the time they get to the Dirty bit, creating a transient shadow stack PTE. However, this will not occur on processors supporting Shadow Stack, and a TLB flush is not necessary.

The second case is that when _PAGE_DIRTY is replaced with _PAGE_COW non- atomically, a transient shadow stack PTE can be created as a result. Thus, prevent that with cmpxchg.

In the case of pmdp_set_wrprotect(), for nopmd configs the ->pmd operated on does not exist and the logic would need to be different. Although the extra functionality will normally be optimized out when user shadow stacks are not configured, also exclude it in the preprocessor stage so that it will still compile. User shadow stack is not supported there by Linux anyway. Leave the cpu_feature_enabled() check so that the functionality also disables based on runtime detection of the feature.

Dave Hansen, Jann Horn, Andy Lutomirski, and Peter Zijlstra provided many insights to the issue. Jann Horn provided the cmpxchg solution.

---

v3:
- Remove unnecessary #ifdef (Dave Hansen)

v2:
- Compile out some code due to clang build error
- Clarify commit log (dhansen)
- Normalize PTE bit descriptions between patches (dhansen)
- Update comment with text from (dhansen)

Yu-cheng v30:
- Replace (pmdval_t) cast with CONFIG_PGTABLE_LEVELES > 2 (Borislav Petkov).

 arch/x86/include/asm/pgtable.h | 35 ++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)
arch/x86/include/asm/pgtable.h +35 -0
index 81f388a5a5ab..f252c42f3ca1 100644
@@ -1289,6 +1289,21 @@ static inline pte_t ptep_get_and_clear_full(struct mm_struct *mm,
 static inline void ptep_set_wrprotect(struct mm_struct *mm,
 				      unsigned long addr, pte_t *ptep)
 {
+	/*
+	 * Avoid accidentally creating shadow stack PTEs
+	 * (Write=0,Dirty=1).  Use cmpxchg() to prevent races with
+	 * the hardware setting Dirty=1.
+	 */
+	if (cpu_feature_enabled(X86_FEATURE_USER_SHSTK)) {
+		pte_t old_pte, new_pte;
+
+		old_pte = READ_ONCE(*ptep);
+		do {
+			new_pte = pte_wrprotect(old_pte);
+		} while (!try_cmpxchg(&ptep->pte, &old_pte.pte, new_pte.pte));
+
+		return;
+	}
 	clear_bit(_PAGE_BIT_RW, (unsigned long *)&ptep->pte);
 }
 
@@ -1341,6 +1356,26 @@ static inline pud_t pudp_huge_get_and_clear(struct mm_struct *mm,
 static inline void pmdp_set_wrprotect(struct mm_struct *mm,
 				      unsigned long addr, pmd_t *pmdp)
 {
+#ifdef CONFIG_X86_USER_SHADOW_STACK
+	/*
+	 * If Shadow Stack is enabled, pmd_wrprotect() moves _PAGE_DIRTY
+	 * to _PAGE_COW (see comments at pmd_wrprotect()).
+	 * When a thread reads a RW=1, Dirty=0 PMD and before changing it
+	 * to RW=0, Dirty=0, another thread could have written to the page
+	 * and the PMD is RW=1, Dirty=1 now.
+	 */
+	if (cpu_feature_enabled(X86_FEATURE_USER_SHSTK)) {
+		pmd_t old_pmd, new_pmd;
+
+		old_pmd = READ_ONCE(*pmdp);
+		do {
+			new_pmd = pmd_wrprotect(old_pmd);
+		} while (!try_cmpxchg(&pmdp->pmd, &old_pmd.pmd, new_pmd.pmd));
+
+		return;
+	}
+#endif
+
 	clear_bit(_PAGE_BIT_RW, (unsigned long *)pmdp);
 }
 
Signature · 1 line
2.17.1
#20 lore raw

PATCH v3 13/37 mm: Move VM_UFFD_MINOR_BIT from 37 to 38

In reply to Rick Edgecombe

From: Yu-cheng Yu <[email protected]>

To introduce VM_SHADOW_STACK as VM_HIGH_ARCH_BIT (37), and make all VM_HIGH_ARCH_BITs stay together, move VM_UFFD_MINOR_BIT from 37 to 38.

---
 include/linux/mm.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
include/linux/mm.h +1 -1
index 8bbcccbc5565..5314ad0a342d 100644
@@ -365,7 +365,7 @@ extern unsigned int kobjsize(const void *objp);
 #endif
 
 #ifdef CONFIG_HAVE_ARCH_USERFAULTFD_MINOR
-# define VM_UFFD_MINOR_BIT	37
+# define VM_UFFD_MINOR_BIT	38
 # define VM_UFFD_MINOR		BIT(VM_UFFD_MINOR_BIT)	/* UFFD minor faults */
 #else /* !CONFIG_HAVE_ARCH_USERFAULTFD_MINOR */
 # define VM_UFFD_MINOR		VM_NONE
Signature · 1 line
2.17.1
maintainer
#21 lore raw

Re: [PATCH v3 13/37] mm: Move VM_UFFD_MINOR_BIT from 37 to 38

Quoted 4 lines · Rick Edgecombe

From: Yu-cheng Yu <[email protected]>

To introduce VM_SHADOW_STACK as VM_HIGH_ARCH_BIT (37), and make all VM_HIGH_ARCH_BITs stay together, move VM_UFFD_MINOR_BIT from 37 to 38.

Why thought ?!? Changelog utterly fails to provide rationale.

#22 lore raw

Re: [PATCH v3 13/37] mm: Move VM_UFFD_MINOR_BIT from 37 to 38

Quoted 8 lines · Peter Zijlstra
Quoted 5 lines · Rick Edgecombe

From: Yu-cheng Yu <[email protected]>

To introduce VM_SHADOW_STACK as VM_HIGH_ARCH_BIT (37), and make all VM_HIGH_ARCH_BITs stay together, move VM_UFFD_MINOR_BIT from 37 to 38.

Why thought ?!? Changelog utterly fails to provide rationale.

I can beef this up. It is just a cleanup type thing to make things less scattered around.

Thanks.

#23 lore raw

PATCH v3 14/37 mm: Introduce VM_SHADOW_STACK for shadow stack memory

In reply to Rick Edgecombe

From: Yu-cheng Yu <[email protected]>

The x86 Control-flow Enforcement Technology (CET) feature includes a new type of memory called shadow stack. This shadow stack memory has some unusual properties, which requires some core mm changes to function properly.

A shadow stack PTE must be read-only and have _PAGE_DIRTY set. However, read-only and Dirty PTEs also exist for copy-on-write (COW) pages. These two cases are handled differently for page faults. Introduce VM_SHADOW_STACK to track shadow stack VMAs.

---

v3:
- Drop arch specific change in arch_vma_name(). The memory can show as anonymous (Kirill)
- Change CONFIG_ARCH_HAS_SHADOW_STACK to CONFIG_X86_USER_SHADOW_STACK in show_smap_vma_flags() (Boris)

 Documentation/filesystems/proc.rst | 1 +
 fs/proc/task_mmu.c                 | 3 +++
 include/linux/mm.h                 | 8 ++++++++
 3 files changed, 12 insertions(+)
Documentation/filesystems/proc.rst +1 -0
index 898c99eae8e4..05506dfa0480 100644
@@ -560,6 +560,7 @@ encoded manner. The codes are the following:
     mt    arm64 MTE allocation tags are enabled
     um    userfaultfd missing tracking
     uw    userfaultfd wr-protect tracking
+    ss    shadow stack page
     ==    =======================================
 
 Note that there is no guarantee that every flag and associated mnemonic will
fs/proc/task_mmu.c +3 -0
index 8a74cdcc9af0..7dee7afbb01b 100644
@@ -703,6 +703,9 @@ static void show_smap_vma_flags(struct seq_file *m, struct vm_area_struct *vma)
 #ifdef CONFIG_HAVE_ARCH_USERFAULTFD_MINOR
 		[ilog2(VM_UFFD_MINOR)]	= "ui",
 #endif /* CONFIG_HAVE_ARCH_USERFAULTFD_MINOR */
+#ifdef CONFIG_X86_USER_SHADOW_STACK
+		[ilog2(VM_SHADOW_STACK)] = "ss",
+#endif
 	};
 	size_t i;
 
include/linux/mm.h +8 -0
index 5314ad0a342d..42c4e4bc972d 100644
@@ -314,11 +314,13 @@ extern unsigned int kobjsize(const void *objp);
 #define VM_HIGH_ARCH_BIT_2	34	/* bit only usable on 64-bit architectures */
 #define VM_HIGH_ARCH_BIT_3	35	/* bit only usable on 64-bit architectures */
 #define VM_HIGH_ARCH_BIT_4	36	/* bit only usable on 64-bit architectures */
+#define VM_HIGH_ARCH_BIT_5	37	/* bit only usable on 64-bit architectures */
 #define VM_HIGH_ARCH_0	BIT(VM_HIGH_ARCH_BIT_0)
 #define VM_HIGH_ARCH_1	BIT(VM_HIGH_ARCH_BIT_1)
 #define VM_HIGH_ARCH_2	BIT(VM_HIGH_ARCH_BIT_2)
 #define VM_HIGH_ARCH_3	BIT(VM_HIGH_ARCH_BIT_3)
 #define VM_HIGH_ARCH_4	BIT(VM_HIGH_ARCH_BIT_4)
+#define VM_HIGH_ARCH_5	BIT(VM_HIGH_ARCH_BIT_5)
 #endif /* CONFIG_ARCH_USES_HIGH_VMA_FLAGS */
 
 #ifdef CONFIG_ARCH_HAS_PKEYS
@@ -334,6 +336,12 @@ extern unsigned int kobjsize(const void *objp);
 #endif
 #endif /* CONFIG_ARCH_HAS_PKEYS */
 
+#ifdef CONFIG_X86_USER_SHADOW_STACK
+# define VM_SHADOW_STACK	VM_HIGH_ARCH_5
+#else
+# define VM_SHADOW_STACK	VM_NONE
+#endif
+
 #if defined(CONFIG_X86)
 # define VM_PAT		VM_ARCH_1	/* PAT reserves whole VMA at once (x86) */
 #elif defined(CONFIG_PPC)
Signature · 1 line
2.17.1
#24 lore raw

PATCH v3 15/37 x86/mm: Check Shadow Stack page fault errors

In reply to Rick Edgecombe

From: Yu-cheng Yu <[email protected]>

The CPU performs "shadow stack accesses" when it expects to encounter shadow stack mappings. These accesses can be implicit (via CALL/RET instructions) or explicit (instructions like WRSS).

Shadow stacks accesses to shadow-stack mappings can see faults in normal, valid operation just like regular accesses to regular mappings. Shadow stacks need some of the same features like delayed allocation, swap and copy-on-write. The kernel needs to use faults to implement those features.

The architecture has concepts of both shadow stack reads and shadow stack writes. Any shadow stack access to non-shadow stack memory will generate a fault with the shadow stack error code bit set.

This means that, unlike normal write protection, the fault handler needs to create a type of memory that can be written to (with instructions that generate shadow stack writes), even to fulfill a read access. So in the case of COW memory, the COW needs to take place even with a shadow stack read. Otherwise the page will be left (shadow stack) writable in userspace. So to trigger the appropriate behavior, set FAULT_FLAG_WRITE for shadow stack accesses, even if the access was a shadow stack read.

Shadow stack accesses can also result in errors, such as when a shadow stack overflows, or if a shadow stack access occurs to a non-shadow-stack mapping. Also, generate the errors for invalid shadow stack accesses.

---

v3:
- Improve comment talking about using FAULT_FLAG_WRITE (Peterz)

v2:
- Update commit log with verbiage/feedback from Dave Hansen
- Clarify reasoning for FAULT_FLAG_WRITE for all shadow stack accesses
- Update comments with some verbiage from Dave Hansen

Yu-cheng v30:
- Update Subject line and add a verb

 arch/x86/include/asm/trap_pf.h |  2 ++
 arch/x86/mm/fault.c            | 26 ++++++++++++++++++++++++++
 2 files changed, 28 insertions(+)
arch/x86/include/asm/trap_pf.h +2 -0
index 10b1de500ab1..afa524325e55 100644
@@ -11,6 +11,7 @@
  *   bit 3 ==				1: use of reserved bit detected
  *   bit 4 ==				1: fault was an instruction fetch
  *   bit 5 ==				1: protection keys block access
+ *   bit 6 ==				1: shadow stack access fault
  *   bit 15 ==				1: SGX MMU page-fault
  */
 enum x86_pf_error_code {
@@ -20,6 +21,7 @@ enum x86_pf_error_code {
 	X86_PF_RSVD	=		1 << 3,
 	X86_PF_INSTR	=		1 << 4,
 	X86_PF_PK	=		1 << 5,
+	X86_PF_SHSTK	=		1 << 6,
 	X86_PF_SGX	=		1 << 15,
 };
 
arch/x86/mm/fault.c +26 -0
index 7b0d4ab894c8..0af3d7f52c2e 100644
@@ -1138,8 +1138,22 @@ access_error(unsigned long error_code, struct vm_area_struct *vma)
 				       (error_code & X86_PF_INSTR), foreign))
 		return 1;
 
+	/*
+	 * Shadow stack accesses (PF_SHSTK=1) are only permitted to
+	 * shadow stack VMAs. All other accesses result in an error.
+	 */
+	if (error_code & X86_PF_SHSTK) {
+		if (unlikely(!(vma->vm_flags & VM_SHADOW_STACK)))
+			return 1;
+		if (unlikely(!(vma->vm_flags & VM_WRITE)))
+			return 1;
+		return 0;
+	}
+
 	if (error_code & X86_PF_WRITE) {
 		/* write, present and write, not present: */
+		if (unlikely(vma->vm_flags & VM_SHADOW_STACK))
+			return 1;
 		if (unlikely(!(vma->vm_flags & VM_WRITE)))
 			return 1;
 		return 0;
@@ -1331,6 +1345,18 @@ void do_user_addr_fault(struct pt_regs *regs,
 
 	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
 
+	/*
+	 * To service shadow stack read faults, unlike normal read faults, the
+	 * fault handler needs to create a type of memory that will also be
+	 * writable (with instructions that generate shadow stack writes).
+	 * In the case of COW memory, the COW needs to take place even with
+	 * a shadow stack read. Otherwise the shared page will be left (shadow
+	 * stack) writable in userspace. So to trigger the appropriate behavior
+	 * by setting FAULT_FLAG_WRITE for shadow stack accesses, even if the
+	 * access was a shadow stack read.
+	 */
+	if (error_code & X86_PF_SHSTK)
+		flags |= FAULT_FLAG_WRITE;
 	if (error_code & X86_PF_WRITE)
 		flags |= FAULT_FLAG_WRITE;
 	if (error_code & X86_PF_INSTR)
Signature · 1 line
2.17.1
maintainer
#25 lore raw

Re: [PATCH v3 15/37] x86/mm: Check Shadow Stack page fault errors

Quoted 4 lines · Rick Edgecombe
arch/x86/mm/fault.c +0 -0
@@ -1331,6 +1345,18 @@ void do_user_addr_fault(struct pt_regs *regs,
 
 	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
 

arch/x86/mm/fault.c void do_user_addr_fault(struct pt_regs *regs, · line 1357

Quoted 10 lines
arch/x86/mm/fault.c +10 -0
+	/*
+	 * To service shadow stack read faults, unlike normal read faults, the
+	 * fault handler needs to create a type of memory that will also be
+	 * writable (with instructions that generate shadow stack writes).
+	 * In the case of COW memory, the COW needs to take place even with
+	 * a shadow stack read. Otherwise the shared page will be left (shadow
+	 * stack) writable in userspace. So to trigger the appropriate behavior
+	 * by setting FAULT_FLAG_WRITE for shadow stack accesses, even if the
+	 * access was a shadow stack read.
+	 */

Clear as mud... So SS pages are 'Write=0,Dirty=1', which, per construction, lack a RW bit. And these pages are writable (WRUSS).

pte_wrprotect() seems to do: _PAGE_DIRTY->_PAGE_COW (which is really weird in this situation), resulting in: 'Write=0,Dirty=0,Cow=1'.

That's regular RO memory and won't raise read-faults.

But I'm thinking RET will trip #PF here when it tries to read the SS because the SSP is not a proper shadow stack page?

And in that case you want to tickle pte_mkwrite() to undo the pte_wrprotect() above?

So while the #PF is a 'read' fault due to RET not actually writing to the shadow stack, you want to force a write fault so it will re-instate the SS page.

Did I get that right?

Quoted 8 lines
arch/x86/mm/fault.c +2 -0
+	if (error_code & X86_PF_SHSTK)
+		flags |= FAULT_FLAG_WRITE;
 	if (error_code & X86_PF_WRITE)
 		flags |= FAULT_FLAG_WRITE;
 	if (error_code & X86_PF_INSTR)
Signature · 1 line
2.17.1
#26 lore raw

Re: [PATCH v3 15/37] x86/mm: Check Shadow Stack page fault errors

Quoted 38 lines · Peter Zijlstra
Quoted 20 lines · Rick Edgecombe
arch/x86/mm/fault.c +2 -0
@@ -1331,6 +1345,18 @@ void do_user_addr_fault(struct pt_regs
 *regs,
 
       perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
 
+     /*
+      * To service shadow stack read faults, unlike normal read

faults, the
+ * fault handler needs to create a type of memory that will
also be
+ * writable (with instructions that generate shadow stack
writes).
+ * In the case of COW memory, the COW needs to take place
even with
+ * a shadow stack read. Otherwise the shared page will be
left (shadow
+ * stack) writable in userspace. So to trigger the
appropriate behavior
+ * by setting FAULT_FLAG_WRITE for shadow stack accesses,
even if the

arch/x86/mm/fault.c void do_user_addr_fault(struct pt_regs *regs, · line 1357

Quoted 2 lines
arch/x86/mm/fault.c +2 -0
+      * access was a shadow stack read.
+      */

Clear as mud... So SS pages are 'Write=0,Dirty=1', which, per construction, lack a RW bit. And these pages are writable (WRUSS).

pte_wrprotect() seems to do: _PAGE_DIRTY->_PAGE_COW (which is really weird in this situation), resulting in: 'Write=0,Dirty=0,Cow=1'.

That's regular RO memory and won't raise read-faults.

But I'm thinking RET will trip #PF here when it tries to read the SS because the SSP is not a proper shadow stack page?

And in that case you want to tickle pte_mkwrite() to undo the pte_wrprotect() above?

Quoted 6 lines

So while the #PF is a 'read' fault due to RET not actually writing to the shadow stack, you want to force a write fault so it will re- instate
the SS page.

Did I get that right?

That's right. I think the assumption that needs to be broken in the readers head is that you can satisfy a read fault with read-only PTE. This is kind of baked in all over the place with the zero-pfn, COW, etc. Maybe I should try to start with that.

maintainer
#27 lore raw

Re: [PATCH v3 15/37] x86/mm: Check Shadow Stack page fault errors

Quoted 4 lines · Rick P

That's right. I think the assumption that needs to be broken in the readers head is that you can satisfy a read fault with read-only PTE. This is kind of baked in all over the place with the zero-pfn, COW, etc. Maybe I should try to start with that.

Maybe something like:

CoW -- pte_wrprotect() -- changes a SS page 'Write=0,Dirty=1' to 'Write=0,Dirty=0,CoW=1' which is a 'regular' RO page. A SS read from RET will #PF because it expects a SS page. Make sure to break the CoW so it can be restored to an SS page, as such force the write path and tickle pte_mkwrite().

#28 lore raw

Re: [PATCH v3 15/37] x86/mm: Check Shadow Stack page fault errors

Quoted 10 lines · Peter Zijlstra
Quoted 5 lines · Rick P

That's right. I think the assumption that needs to be broken in the readers head is that you can satisfy a read fault with read-only PTE.
This is kind of baked in all over the place with the zero-pfn, COW, etc. Maybe I should try to start with that.

Maybe something like:

Quoted 8 lines

CoW -- pte_wrprotect() -- changes a SS page 'Write=0,Dirty=1' to 'Write=0,Dirty=0,CoW=1' which is a 'regular' RO page. A SS read from RET
will #PF because it expects a SS page. Make sure to break the CoW so it
can be restored to an SS page, as such force the write path and tickle
pte_mkwrite().

Hmm, TBH I'm not sure it's more clear. I tried to take this and fill it out more. Does it sound better?

When a page becomes COW it changes from a shadow stack permissioned page (Write=0,Dirty=1) to (Write=0,Dirty=0,CoW=1), which is simply read-only to the CPU. When shadow stack is enabled, a RET would normally pop the shadow stack by reading it with a "shadow stack read" access. However, in the COW case the shadow stack memory does not have shadow stack permissions, it is read-only. So it will generate a fault.

For conventionally writable pages, a read can be serviced with a read only PTE, and COW would not have to happen. But for shadow stack, there isn't the concept of read-only shadow stack memory. If it is shadow stack permissioned, it can be modified via CALL and RET instructions. So COW needs to happen before any memory can be mapped with shadow stack permissions.

Shadow stack accesses (read or write) need to be serviced with shadow stack permissioned memory, so in the case of a shadow stack read access, treat it as a WRITE fault so both COW will happen and the write fault path will tickle maybe_mkwrite() and map the memory shadow stack.

maintainer
#29 lore raw

Re: [PATCH v3 15/37] x86/mm: Check Shadow Stack page fault errors

Quoted 14 lines · Rick P

When a page becomes COW it changes from a shadow stack permissioned page (Write=0,Dirty=1) to (Write=0,Dirty=0,CoW=1), which is simply read-only to the CPU. When shadow stack is enabled, a RET would normally pop the shadow stack by reading it with a "shadow stack read" access. However, in the COW case the shadow stack memory does not have shadow stack permissions, it is read-only. So it will generate a fault.

For conventionally writable pages, a read can be serviced with a read only PTE, and COW would not have to happen. But for shadow stack, there isn't the concept of read-only shadow stack memory. If it is shadow stack permissioned, it can be modified via CALL and RET instructions. So COW needs to happen before any memory can be mapped with shadow stack permissions.

Quoted 4 lines

Shadow stack accesses (read or write) need to be serviced with shadow stack permissioned memory, so in the case of a shadow stack read access, treat it as a WRITE fault so both COW will happen and the write fault path will tickle maybe_mkwrite() and map the memory shadow stack.

ACK.

#30 lore raw

PATCH v3 16/37 x86/mm: Update maybe_mkwrite() for shadow stack

In reply to Rick Edgecombe

From: Yu-cheng Yu <[email protected]>

When serving a page fault, maybe_mkwrite() makes a PTE writable if there is a write access to it, and its vma has VM_WRITE. Shadow stack accesses to shadow stack vma's are also treated as write accesses by the fault handler. This is because setting shadow stack memory makes it writable via some instructions, so COW has to happen even for shadow stack reads.

So maybe_mkwrite() should continue to set VM_WRITE vma's as normally writable, but also set VM_WRITE|VM_SHADOW_STACK vma's as shadow stack.

Do this by adding a pte_mkwrite_shstk() and a cross-arch stub. Check for VM_SHADOW_STACK in maybe_mkwrite() and call pte_mkwrite_shstk() accordingly.

Apply the same changes to maybe_pmd_mkwrite().

---

v3:
- Remove unneeded define for maybe_mkwrite (Peterz)
- Switch to cleaner version of maybe_mkwrite() (Peterz)

v2:
- Change to handle shadow stacks that are VM_WRITE|VM_SHADOW_STACK
- Ditch arch specific maybe_mkwrite(), and make the code generic
- Move do_anonymous_page() to next patch (Kirill)

Yu-cheng v29:
- Remove likely()'s.

 arch/x86/include/asm/pgtable.h |  2 ++
 include/linux/mm.h             | 13 ++++++++++---
 include/linux/pgtable.h        | 14 ++++++++++++++
 mm/huge_memory.c               | 10 +++++++---
 4 files changed, 33 insertions(+), 6 deletions(-)
arch/x86/include/asm/pgtable.h +2 -0
index f252c42f3ca1..df67bcf9f69e 100644
@@ -420,6 +420,7 @@ static inline pte_t pte_mkdirty(pte_t pte)
 	return pte_set_flags(pte, dirty | _PAGE_SOFT_DIRTY);
 }
 
+#define pte_mkwrite_shstk pte_mkwrite_shstk
 static inline pte_t pte_mkwrite_shstk(pte_t pte)
 {
 	/* pte_clear_cow() also sets Dirty=1 */
@@ -556,6 +557,7 @@ static inline pmd_t pmd_mkdirty(pmd_t pmd)
 	return pmd_set_flags(pmd, dirty | _PAGE_SOFT_DIRTY);
 }
 
+#define pmd_mkwrite_shstk pmd_mkwrite_shstk
 static inline pmd_t pmd_mkwrite_shstk(pmd_t pmd)
 {
 	return pmd_clear_cow(pmd);
include/linux/mm.h +10 -3
index 42c4e4bc972d..5d9536fa860a 100644
@@ -1015,12 +1015,19 @@ void free_compound_page(struct page *page);
  * servicing faults for write access.  In the normal case, do always want
  * pte_mkwrite.  But get_user_pages can cause write faults for mappings
  * that do not have writing enabled, when used by access_process_vm.
+ *
+ * If a vma is shadow stack (a type of writable memory), mark the pte shadow
+ * stack.
  */
 static inline pte_t maybe_mkwrite(pte_t pte, struct vm_area_struct *vma)
 {
-	if (likely(vma->vm_flags & VM_WRITE))
-		pte = pte_mkwrite(pte);
-	return pte;
+	if (!(vma->vm_flags & VM_WRITE))
+		return pte;
+
+	if (vma->vm_flags & VM_SHADOW_STACK)
+		return pte_mkwrite_shstk(pte);
+
+	return pte_mkwrite(pte);
 }
 
 vm_fault_t do_set_pmd(struct vm_fault *vmf, struct page *page);
include/linux/pgtable.h +14 -0
index a108b60a6962..5ce6732a6b65 100644
@@ -493,6 +493,13 @@ static inline pte_t pte_sw_mkyoung(pte_t pte)
 #define pte_mk_savedwrite pte_mkwrite
 #endif
 
+#ifndef pte_mkwrite_shstk
+static inline pte_t pte_mkwrite_shstk(pte_t pte)
+{
+	return pte;
+}
+#endif
+
 #ifndef pte_clear_savedwrite
 #define pte_clear_savedwrite pte_wrprotect
 #endif
@@ -501,6 +508,13 @@ static inline pte_t pte_sw_mkyoung(pte_t pte)
 #define pmd_savedwrite pmd_write
 #endif
 
+#ifndef pmd_mkwrite_shstk
+static inline pmd_t pmd_mkwrite_shstk(pmd_t pmd)
+{
+	return pmd;
+}
+#endif
+
 #ifndef pmd_mk_savedwrite
 #define pmd_mk_savedwrite pmd_mkwrite
 #endif
mm/huge_memory.c +7 -3
index 561a42567477..73b9b78f8cf4 100644
@@ -553,9 +553,13 @@ __setup("transparent_hugepage=", setup_transparent_hugepage);
 
 pmd_t maybe_pmd_mkwrite(pmd_t pmd, struct vm_area_struct *vma)
 {
-	if (likely(vma->vm_flags & VM_WRITE))
-		pmd = pmd_mkwrite(pmd);
-	return pmd;
+	if (!(vma->vm_flags & VM_WRITE))
+		return pmd;
+
+	if (vma->vm_flags & VM_SHADOW_STACK)
+		return pmd_mkwrite_shstk(pmd);
+
+	return pmd_mkwrite(pmd);
 }
 
 #ifdef CONFIG_MEMCG
Signature · 1 line
2.17.1
#31 lore raw

PATCH v3 17/37 mm: Fixup places that call pte_mkwrite() directly

In reply to Rick Edgecombe

From: Yu-cheng Yu <[email protected]>

The x86 Control-flow Enforcement Technology (CET) feature includes a new type of memory called shadow stack. This shadow stack memory has some unusual properties, which requires some core mm changes to function properly.

With the introduction of shadow stack memory there are two ways a pte can be writable: regular writable memory and shadow stack memory.

In past patches, maybe_mkwrite() has been updated to apply pte_mkwrite() or pte_mkwrite_shstk() depending on the VMA flag. This covers most cases where a PTE is made writable. However, there are places where pte_mkwrite() is called directly and the logic should now also create a shadow stack PTE in the case of a shadow stack VMA.

- do_anonymous_page() and migrate_vma_insert_page() check VM_WRITE directly and call pte_mkwrite(). Teach it about pte_mkwrite_shstk()

- When userfaultfd is creating a PTE after userspace handles the fault it calls pte_mkwrite() directly. Teach it about pte_mkwrite_shstk()

To make the code cleaner, introduce is_shstk_write() which simplifies checking for VM_WRITE | VM_SHADOW_STACK together.

In other cases where pte_mkwrite() is called directly, the VMA will not be VM_SHADOW_STACK, and so shadow stack memory should not be created.
- In the case of pte_savedwrite(), shadow stack VMA's are excluded.
- In the case of the "dirty_accountable" optimization in mprotect(), shadow stack VMA's won't be VM_SHARED, so it is not nessary.

---

v3:
- Restore do_anonymous_page() that accidetally moved commits (Kirill)
- Open code maybe_mkwrite() cases from v2, so the behavior doesn't change to mark that non-writable PTEs dirty. (Nadav)

v2:
- Updated commit log with comment's from Dave Hansen
- Dave also suggested (I understood) to maybe tweak vm_get_page_prot() to avoid having to call maybe_mkwrite(). After playing around with this I opted to *not* do this. Shadow stack memory memory is effectively writable, so having the default permissions be writable ended up mapping the zero page as writable and other surprises. So creating shadow stack memory needs to be done with manual logic like pte_mkwrite().
- Drop change in change_pte_range() because it couldn't actually trigger for shadow stack VMAs.
- Clarify reasoning for skipped cases of pte_mkwrite().

Yu-cheng v25:
- Apply same changes to do_huge_pmd_numa_page() as to do_numa_page().

 arch/x86/include/asm/pgtable.h |  3 +++
 arch/x86/mm/pgtable.c          |  6 ++++++
 include/linux/pgtable.h        |  7 +++++++
 mm/memory.c                    |  5 ++++-
 mm/migrate_device.c            |  4 +++-
 mm/userfaultfd.c               | 10 +++++++---
 6 files changed, 30 insertions(+), 5 deletions(-)
arch/x86/include/asm/pgtable.h +3 -0
index df67bcf9f69e..d57dc1b2d3e8 100644
@@ -919,6 +919,9 @@ static inline pgd_t pti_set_user_pgtbl(pgd_t *pgdp, pgd_t pgd)
 }
 #endif  /* CONFIG_PAGE_TABLE_ISOLATION */
 
+#define is_shstk_write is_shstk_write
+extern bool is_shstk_write(unsigned long vm_flags);
+
 #endif	/* __ASSEMBLY__ */
 
 
arch/x86/mm/pgtable.c +6 -0
index 8525f2876fb4..f0e536bea3ca 100644
@@ -876,3 +876,9 @@ int pmd_free_pte_page(pmd_t *pmd, unsigned long addr)
 
 #endif /* CONFIG_X86_64 */
 #endif	/* CONFIG_HAVE_ARCH_HUGE_VMAP */
+
+bool is_shstk_write(unsigned long vm_flags)
+{
+	return (vm_flags & (VM_SHADOW_STACK | VM_WRITE)) ==
+	       (VM_SHADOW_STACK | VM_WRITE);
+}
include/linux/pgtable.h +7 -0
index 5ce6732a6b65..36926a207b6d 100644
@@ -1567,6 +1567,13 @@ static inline bool arch_has_pfn_modify_check(void)
 }
 #endif /* !_HAVE_ARCH_PFN_MODIFY_ALLOWED */
 
+#ifndef is_shstk_write
+static inline bool is_shstk_write(unsigned long vm_flags)
+{
+	return false;
+}
+#endif
+
 /*
  * Architecture PAGE_KERNEL_* fallbacks
  *
mm/memory.c +4 -1
index f88c351aecd4..b9bee283aad3 100644
@@ -4128,7 +4128,10 @@ static vm_fault_t do_anonymous_page(struct vm_fault *vmf)
 
 	entry = mk_pte(page, vma->vm_page_prot);
 	entry = pte_sw_mkyoung(entry);
-	if (vma->vm_flags & VM_WRITE)
+
+	if (is_shstk_write(vma->vm_flags))
+		entry = pte_mkwrite_shstk(pte_mkdirty(entry));
+	else if (vma->vm_flags & VM_WRITE)
 		entry = pte_mkwrite(pte_mkdirty(entry));
 
 	vmf->pte = pte_offset_map_lock(vma->vm_mm, vmf->pmd, vmf->address,
mm/migrate_device.c +3 -1
index 6fa682eef7a0..4c21c600bf46 100644
@@ -641,7 +641,9 @@ static void migrate_vma_insert_page(struct migrate_vma *migrate,
 			goto abort;
 		}
 		entry = mk_pte(page, vma->vm_page_prot);
-		if (vma->vm_flags & VM_WRITE)
+		if (is_shstk_write(vma->vm_flags))
+			entry = pte_mkwrite_shstk(pte_mkdirty(entry));
+		else if (vma->vm_flags & VM_WRITE)
 			entry = pte_mkwrite(pte_mkdirty(entry));
 	}
 
mm/userfaultfd.c +7 -3
index 3d0fef3980b3..503135b079b6 100644
@@ -63,6 +63,7 @@ int mfill_atomic_install_pte(struct mm_struct *dst_mm, pmd_t *dst_pmd,
 	int ret;
 	pte_t _dst_pte, *dst_pte;
 	bool writable = dst_vma->vm_flags & VM_WRITE;
+	bool shstk = dst_vma->vm_flags & VM_SHADOW_STACK;
 	bool vm_shared = dst_vma->vm_flags & VM_SHARED;
 	bool page_in_cache = page->mapping;
 	spinlock_t *ptl;
@@ -83,9 +84,12 @@ int mfill_atomic_install_pte(struct mm_struct *dst_mm, pmd_t *dst_pmd,
 		writable = false;
 	}
 
-	if (writable)
-		_dst_pte = pte_mkwrite(_dst_pte);
-	else
+	if (writable) {
+		if (shstk)
+			_dst_pte = pte_mkwrite_shstk(_dst_pte);
+		else
+			_dst_pte = pte_mkwrite(_dst_pte);
+	} else
 		/*
 		 * We need this to make sure write bit removed; as mk_pte()
 		 * could return a pte with write bit set.
Signature · 1 line
2.17.1
#32 lore raw

PATCH v3 18/37 mm: Add guard pages around a shadow stack.

In reply to Rick Edgecombe

From: Yu-cheng Yu <[email protected]>

The x86 Control-flow Enforcement Technology (CET) feature includes a new type of memory called shadow stack. This shadow stack memory has some unusual properties, which requires some core mm changes to function properly.

The architecture of shadow stack constrains the ability of userspace to move the shadow stack pointer (SSP) in order to prevent corrupting or switching to other shadow stacks. The RSTORSSP can move the spp to different shadow stacks, but it requires a specially placed token in order to do this. However, the architecture does not prevent incrementing the stack pointer to wander onto an adjacent shadow stack. To prevent this in software, enforce guard pages at the beginning of shadow stack vmas, such that there will always be a gap between adjacent shadow stacks.

Make the gap big enough so that no userspace SSP changing operations (besides RSTORSSP), can move the SSP from one stack to the next. The SSP can increment or decrement by CALL, RET and INCSSP. CALL and RET can move the SSP by a maximum of 8 bytes, at which point the shadow stack would be accessed.

The INCSSP instruction can also increment the shadow stack pointer. It is the shadow stack analog of an instruction like:

	addq    $0x80, %rsp

However, there is one important difference between an ADD on %rsp and INCSSP. In addition to modifying SSP, INCSSP also reads from the memory of the first and last elements that were "popped". It can be thought of as acting like this:

READ_ONCE(ssp); // read+discard top element on stack
ssp += nr_to_pop * 8; // move the shadow stack
READ_ONCE(ssp-8); // read+discard last popped stack element

The maximum distance INCSSP can move the SSP is 2040 bytes, before it would read the memory. Therefore a single page gap will be enough to prevent any operation from shifting the SSP to an adjacent stack, since it would have to land in the gap at least once, causing a fault.

This could be accomplished by using VM_GROWSDOWN, but this has a downside. The behavior would allow shadow stack's to grow, which is unneeded and adds a strange difference to how most regular stacks work.

---

v2:
- Use __weak instead of #ifdef (Dave Hansen)
- Only have start gap on shadow stack (Andy Luto)
- Create stack_guard_start_gap() to not duplicate code in an arch version of vm_start_gap() (Dave Hansen)
- Improve commit log partly with verbiage from (Dave Hansen)

Yu-cheng v25:
- Move SHADOW_STACK_GUARD_GAP to arch/x86/mm/mmap.c.

Yu-cheng v24:
- Instead changing vm_*_gap(), create x86-specific versions.

 arch/x86/mm/mmap.c | 23 +++++++++++++++++++++++
 include/linux/mm.h | 11 ++++++-----
 mm/mmap.c          |  7 +++++++
 3 files changed, 36 insertions(+), 5 deletions(-)
arch/x86/mm/mmap.c +23 -0
index c90c20904a60..66da1f3298b0 100644
@@ -248,3 +248,26 @@ bool pfn_modify_allowed(unsigned long pfn, pgprot_t prot)
 		return false;
 	return true;
 }
+
+unsigned long stack_guard_start_gap(struct vm_area_struct *vma)
+{
+	if (vma->vm_flags & VM_GROWSDOWN)
+		return stack_guard_gap;
+
+	/*
+	 * Shadow stack pointer is moved by CALL, RET, and INCSSP(Q/D).
+	 * INCSSPQ moves shadow stack pointer up to 255 * 8 = ~2 KB
+	 * (~1KB for INCSSPD) and touches the first and the last element
+	 * in the range, which triggers a page fault if the range is not
+	 * in a shadow stack. Because of this, creating 4-KB guard pages
+	 * around a shadow stack prevents these instructions from going
+	 * beyond.
+	 *
+	 * Creation of VM_SHADOW_STACK is tightly controlled, so a vma
+	 * can't be both VM_GROWSDOWN and VM_SHADOW_STACK
+	 */
+	if (vma->vm_flags & VM_SHADOW_STACK)
+		return PAGE_SIZE;
+
+	return 0;
+}
include/linux/mm.h +6 -5
index 5d9536fa860a..0a3f7e2b32df 100644
@@ -2832,15 +2832,16 @@ struct vm_area_struct *vma_lookup(struct mm_struct *mm, unsigned long addr)
 	return mtree_load(&mm->mm_mt, addr);
 }
 
+unsigned long stack_guard_start_gap(struct vm_area_struct *vma);
+
 static inline unsigned long vm_start_gap(struct vm_area_struct *vma)
 {
+	unsigned long gap = stack_guard_start_gap(vma);
 	unsigned long vm_start = vma->vm_start;
 
-	if (vma->vm_flags & VM_GROWSDOWN) {
-		vm_start -= stack_guard_gap;
-		if (vm_start > vma->vm_start)
-			vm_start = 0;
-	}
+	vm_start -= gap;
+	if (vm_start > vma->vm_start)
+		vm_start = 0;
 	return vm_start;
 }
 
mm/mmap.c +7 -0
index 2def55555e05..f67606fbc464 100644
@@ -281,6 +281,13 @@ SYSCALL_DEFINE1(brk, unsigned long, brk)
 	return origbrk;
 }
 
+unsigned long __weak stack_guard_start_gap(struct vm_area_struct *vma)
+{
+	if (vma->vm_flags & VM_GROWSDOWN)
+		return stack_guard_gap;
+	return 0;
+}
+
 #if defined(CONFIG_DEBUG_VM_MAPLE_TREE)
 extern void mt_validate(struct maple_tree *mt);
 extern void mt_dump(const struct maple_tree *mt);
Signature · 1 line
2.17.1
maintainer
#33 lore raw

Re: [PATCH v3 18/37] mm: Add guard pages around a shadow stack.

Quoted 6 lines · Rick Edgecombe
arch/x86/mm/mmap.c +0 -0
index c90c20904a60..66da1f3298b0 100644
@@ -248,3 +248,26 @@ bool pfn_modify_allowed(unsigned long pfn, pgprot_t prot)
 		return false;

arch/x86/mm/mmap.c bool pfn_modify_allowed(unsigned long pfn, pgprot_t prot) · line 258

Quoted 10 lines
arch/x86/mm/mmap.c +8 -0
 	return true;
 }
+
+unsigned long stack_guard_start_gap(struct vm_area_struct *vma)
+{
+	if (vma->vm_flags & VM_GROWSDOWN)
+		return stack_guard_gap;
+
+	/*
+	 * Shadow stack pointer is moved by CALL, RET, and INCSSP(Q/D).

Can we perhaps write this like: INCSPP[QD] ? The () notation makes it
look like a function.

Quoted 46 lines
arch/x86/mm/mmap.c +15 -0
+	 * INCSSPQ moves shadow stack pointer up to 255 * 8 = ~2 KB
+	 * (~1KB for INCSSPD) and touches the first and the last element
+	 * in the range, which triggers a page fault if the range is not
+	 * in a shadow stack. Because of this, creating 4-KB guard pages
+	 * around a shadow stack prevents these instructions from going
+	 * beyond.
+	 *
+	 * Creation of VM_SHADOW_STACK is tightly controlled, so a vma
+	 * can't be both VM_GROWSDOWN and VM_SHADOW_STACK
+	 */
+	if (vma->vm_flags & VM_SHADOW_STACK)
+		return PAGE_SIZE;
+
+	return 0;
+}
include/linux/mm.h +6 -5
index 5d9536fa860a..0a3f7e2b32df 100644
@@ -2832,15 +2832,16 @@ struct vm_area_struct *vma_lookup(struct mm_struct *mm, unsigned long addr)
 	return mtree_load(&mm->mm_mt, addr);
 }
 
+unsigned long stack_guard_start_gap(struct vm_area_struct *vma);
+
 static inline unsigned long vm_start_gap(struct vm_area_struct *vma)
 {
+	unsigned long gap = stack_guard_start_gap(vma);
 	unsigned long vm_start = vma->vm_start;
 
-	if (vma->vm_flags & VM_GROWSDOWN) {
-		vm_start -= stack_guard_gap;
-		if (vm_start > vma->vm_start)
-			vm_start = 0;
-	}
+	vm_start -= gap;
+	if (vm_start > vma->vm_start)
+		vm_start = 0;
 	return vm_start;
 }
 
mm/mmap.c +0 -0
index 2def55555e05..f67606fbc464 100644

mm/mmap.c SYSCALL_DEFINE1(brk, unsigned long, brk) · line 289

Quoted 9 lines
mm/mmap.c +6 -0
@@ -281,6 +281,13 @@ SYSCALL_DEFINE1(brk, unsigned long, brk)
 	return origbrk;
 }
 
+unsigned long __weak stack_guard_start_gap(struct vm_area_struct *vma)
+{
+	if (vma->vm_flags & VM_GROWSDOWN)
+		return stack_guard_gap;
+	return 0;
+}

I'm thinking perhaps this wants to be an inline function?

#34 lore raw

Re: [PATCH v3 18/37] mm: Add guard pages around a shadow stack.

Quoted 15 lines · Peter Zijlstra
Quoted 13 lines · Rick Edgecombe
arch/x86/mm/mmap.c +4 -0
index c90c20904a60..66da1f3298b0 100644
@@ -248,3 +248,26 @@ bool pfn_modify_allowed(unsigned long pfn,
 pgprot_t prot)
               return false;
       return true;
  }
+
+unsigned long stack_guard_start_gap(struct vm_area_struct *vma)
+{
+     if (vma->vm_flags & VM_GROWSDOWN)
Quoted 8 lines
Quoted 5 lines
arch/x86/mm/mmap.c +4 -0
+             return stack_guard_gap;
+
+     /*
+      * Shadow stack pointer is moved by CALL, RET, and

INCSSP(Q/D).

Can we perhaps write this like: INCSPP[QD] ? The () notation makes it look like a function.

Sure.

Quoted 57 lines
Quoted 57 lines
arch/x86/mm/mmap.c +2 -0
+      * INCSSPQ moves shadow stack pointer up to 255 * 8 = ~2 KB
+      * (~1KB for INCSSPD) and touches the first and the last

element
+ * in the range, which triggers a page fault if the range is
not
+ * in a shadow stack. Because of this, creating 4-KB guard
pages
+ * around a shadow stack prevents these instructions from
going

arch/x86/mm/mmap.c +3 -0
+      * beyond.
+      *
+      * Creation of VM_SHADOW_STACK is tightly controlled, so a

vma

arch/x86/mm/mmap.c +7 -0
+      * can't be both VM_GROWSDOWN and VM_SHADOW_STACK
+      */
+     if (vma->vm_flags & VM_SHADOW_STACK)
+             return PAGE_SIZE;
+
+     return 0;
+}
include/linux/mm.h +6 -5
index 5d9536fa860a..0a3f7e2b32df 100644
@@ -2832,15 +2832,16 @@ struct vm_area_struct *vma_lookup(struct
 mm_struct *mm, unsigned long addr)
       return mtree_load(&mm->mm_mt, addr);
  }
 
+unsigned long stack_guard_start_gap(struct vm_area_struct *vma);
+
  static inline unsigned long vm_start_gap(struct vm_area_struct
 *vma)
  {
+     unsigned long gap = stack_guard_start_gap(vma);
       unsigned long vm_start = vma->vm_start;
 
-     if (vma->vm_flags & VM_GROWSDOWN) {
-             vm_start -= stack_guard_gap;
-             if (vm_start > vma->vm_start)
-                     vm_start = 0;
-     }
+     vm_start -= gap;
+     if (vm_start > vma->vm_start)
+             vm_start = 0;
       return vm_start;
  }
mm/mmap.c +0 -0
index 2def55555e05..f67606fbc464 100644
@@ -281,6 +281,13 @@ SYSCALL_DEFINE1(brk, unsigned long, brk)
       return origbrk;
  }
 
Quoted 9 lines

mm/mmap.c SYSCALL_DEFINE1(brk, unsigned long, brk) · line 290

Quoted 7 lines
mm/mmap.c +6 -0
+unsigned long __weak stack_guard_start_gap(struct vm_area_struct
 *vma)
+{
+     if (vma->vm_flags & VM_GROWSDOWN)
+             return stack_guard_gap;
+     return 0;
+}

I'm thinking perhaps this wants to be an inline function?

I don't think it can work with weak then.

maintainer
#35 lore raw

Re: [PATCH v3 18/37] mm: Add guard pages around a shadow stack.

Quoted 11 lines · Rick P
Quoted 9 lines

arch/x86/mm/mmap.c bool pfn_modify_allowed(unsigned long pfn, pgprot_t prot) · line 273

Quoted 7 lines

+unsigned long __weak stack_guard_start_gap(struct vm_area_struct *vma)

arch/x86/mm/mmap.c +5 -0
+{
+     if (vma->vm_flags & VM_GROWSDOWN)
+             return stack_guard_gap;
+     return 0;
+}

I'm thinking perhaps this wants to be an inline function?

I don't think it can work with weak then.

That was kinda the point, __weak sucks and this is very small in any case.

#36 lore raw

Re: [PATCH v3 18/37] mm: Add guard pages around a shadow stack.

Quoted 12 lines · Peter Zijlstra
Quoted 11 lines · Rick P
Quoted 10 lines

arch/x86/mm/mmap.c bool pfn_modify_allowed(unsigned long pfn, pgprot_t prot) · line 273

Quoted 8 lines

+unsigned long __weak stack_guard_start_gap(struct vm_area_struct
*vma)

arch/x86/mm/mmap.c +5 -0
+{
+     if (vma->vm_flags & VM_GROWSDOWN)
+             return stack_guard_gap;
+     return 0;
+}

I'm thinking perhaps this wants to be an inline function?

Quoted 4 lines
Quoted 1 line

I don't think it can work with weak then.

That was kinda the point, __weak sucks and this is very small in any case.

__weak was suggested here:

https://lore.kernel.org/lkml/[email protected]/

Let me try to put in cross arch code again like the other suggestion was. I can't remember the reason why I didn't do it.

#37 lore raw

PATCH v3 19/37 mm/mmap: Add shadow stack pages to memory accounting

In reply to Rick Edgecombe

From: Yu-cheng Yu <[email protected]>

The x86 Control-flow Enforcement Technology (CET) feature includes a new type of memory called shadow stack. This shadow stack memory has some unusual properties, which requires some core mm changes to function properly.

Account shadow stack pages to stack memory.

---

v3:
- Remove unneeded VM_SHADOW_STACK check in accountable_mapping() (Kirill)

v2:
- Remove is_shadow_stack_mapping() and just change it to directly bitwise and VM_SHADOW_STACK.

Yu-cheng v26:
- Remove redundant #ifdef CONFIG_MMU.

Yu-cheng v25:
- Remove #ifdef CONFIG_ARCH_HAS_SHADOW_STACK for is_shadow_stack_mapping().

 mm/mmap.c | 2 ++
 1 file changed, 2 insertions(+)
mm/mmap.c +2 -0
index f67606fbc464..4dc157869b34 100644
@@ -3298,6 +3298,8 @@ void vm_stat_account(struct mm_struct *mm, vm_flags_t flags, long npages)
 		mm->exec_vm += npages;
 	else if (is_stack_mapping(flags))
 		mm->stack_vm += npages;
+	else if (flags & VM_SHADOW_STACK)
+		mm->stack_vm += npages;
 	else if (is_data_mapping(flags))
 		mm->data_vm += npages;
 }
Signature · 1 line
2.17.1
#38 lore raw

PATCH v3 20/37 mm/mprotect: Exclude shadow stack from preserve_write

In reply to Rick Edgecombe

From: Yu-cheng Yu <[email protected]>

The x86 Control-flow Enforcement Technology (CET) feature includes a new type of memory called shadow stack. This shadow stack memory has some unusual properties, which requires some core mm changes to function properly.

In change_pte_range(), when a PTE is changed for prot_numa, _PAGE_RW is preserved to avoid the additional write fault after the NUMA hinting fault. However, pte_write() now includes both normal writable and shadow stack (Write=0, Dirty=1) PTEs, but the latter does not have _PAGE_RW and has no need to preserve it.

Exclude shadow stack from preserve_write test, and apply the same change to change_huge_pmd().

---

Yu-cheng v25:
- Move is_shadow_stack_mapping() to a separate line.

Yu-cheng v24:
- Change arch_shadow_stack_mapping() to is_shadow_stack_mapping().

 mm/huge_memory.c | 7 +++++++
 mm/mprotect.c    | 7 +++++++
 2 files changed, 14 insertions(+)
mm/huge_memory.c +7 -0
index 73b9b78f8cf4..7643a4db1b50 100644
@@ -1803,6 +1803,13 @@ int change_huge_pmd(struct mmu_gather *tlb, struct vm_area_struct *vma,
 		return 0;
 
 	preserve_write = prot_numa && pmd_write(*pmd);
+
+	/*
+	 * Preserve only normal writable huge PMD, but not shadow
+	 * stack (RW=0, Dirty=1).
+	 */
+	if (vma->vm_flags & VM_SHADOW_STACK)
+		preserve_write = false;
 	ret = 1;
 
 #ifdef CONFIG_ARCH_ENABLE_THP_MIGRATION
mm/mprotect.c +7 -0
index 668bfaa6ed2a..ea82ce5f38fe 100644
@@ -115,6 +115,13 @@ static unsigned long change_pte_range(struct mmu_gather *tlb,
 			pte_t ptent;
 			bool preserve_write = prot_numa && pte_write(oldpte);
 
+			/*
+			 * Preserve only normal writable PTE, but not shadow
+			 * stack (RW=0, Dirty=1).
+			 */
+			if (vma->vm_flags & VM_SHADOW_STACK)
+				preserve_write = false;
+
 			/*
 			 * Avoid trapping faults against the zero or KSM
 			 * pages. See similar comment in change_huge_pmd.
Signature · 1 line
2.17.1
maintainer
#39 lore raw

Re: [PATCH v3 20/37] mm/mprotect: Exclude shadow stack from preserve_write

Quoted 26 lines · Rick Edgecombe
mm/huge_memory.c +7 -0
index 73b9b78f8cf4..7643a4db1b50 100644
@@ -1803,6 +1803,13 @@ int change_huge_pmd(struct mmu_gather *tlb, struct vm_area_struct *vma,
 		return 0;
 
 	preserve_write = prot_numa && pmd_write(*pmd);
+
+	/*
+	 * Preserve only normal writable huge PMD, but not shadow
+	 * stack (RW=0, Dirty=1).
+	 */
+	if (vma->vm_flags & VM_SHADOW_STACK)
+		preserve_write = false;
 	ret = 1;
 
 #ifdef CONFIG_ARCH_ENABLE_THP_MIGRATION
mm/mprotect.c +0 -0
index 668bfaa6ed2a..ea82ce5f38fe 100644
@@ -115,6 +115,13 @@ static unsigned long change_pte_range(struct mmu_gather *tlb,
 			pte_t ptent;
 			bool preserve_write = prot_numa && pte_write(oldpte);
 

mm/mprotect.c static unsigned long change_pte_range(struct mmu_gather *tlb, · line 127

Quoted 10 lines
mm/mprotect.c +7 -0
+			/*
+			 * Preserve only normal writable PTE, but not shadow
+			 * stack (RW=0, Dirty=1).
+			 */
+			if (vma->vm_flags & VM_SHADOW_STACK)
+				preserve_write = false;
+
 			/*
 			 * Avoid trapping faults against the zero or KSM
 			 * pages. See similar comment in change_huge_pmd.

These comments lack a why component; someone is going to wonder wtf this code is doing in the near future -- that someone might be you.

#40 lore raw

Re: [PATCH v3 20/37] mm/mprotect: Exclude shadow stack from preserve_write

Quoted 39 lines · Peter Zijlstra
Quoted 38 lines · Rick Edgecombe
mm/huge_memory.c +7 -0
index 73b9b78f8cf4..7643a4db1b50 100644
@@ -1803,6 +1803,13 @@ int change_huge_pmd(struct mmu_gather *tlb,
 struct vm_area_struct *vma,
               return 0;
 
       preserve_write = prot_numa && pmd_write(*pmd);
+
+     /*
+      * Preserve only normal writable huge PMD, but not shadow
+      * stack (RW=0, Dirty=1).
+      */
+     if (vma->vm_flags & VM_SHADOW_STACK)
+             preserve_write = false;
       ret = 1;
 
  #ifdef CONFIG_ARCH_ENABLE_THP_MIGRATION
mm/mprotect.c +2 -0
index 668bfaa6ed2a..ea82ce5f38fe 100644
@@ -115,6 +115,13 @@ static unsigned long change_pte_range(struct
 mmu_gather *tlb,
                       pte_t ptent;
                       bool preserve_write = prot_numa &&
 pte_write(oldpte);
 
+                     /*
+                      * Preserve only normal writable PTE, but not

shadow

mm/mprotect.c +5 -0
+                      * stack (RW=0, Dirty=1).
+                      */
+                     if (vma->vm_flags & VM_SHADOW_STACK)
+                             preserve_write = false;
+
                       /*
Quoted 8 lines
Quoted 4 lines

* Avoid trapping faults against the zero or
KSM
* pages. See similar comment in
change_huge_pmd.

These comments lack a why component; someone is going to wonder wtf this
code is doing in the near future -- that someone might be you.

Good point, I'll expand it.

#41 lore raw

PATCH v3 21/37 mm: Re-introduce vm_flags to do_mmap()

In reply to Rick Edgecombe

From: Yu-cheng Yu <[email protected]>

There was no more caller passing vm_flags to do_mmap(), and vm_flags was removed from the function's input by:

commit 45e55300f114 ("mm: remove unnecessary wrapper function do_mmap_pgoff()").

There is a new user now. Shadow stack allocation passes VM_SHADOW_STACK to do_mmap(). Thus, re-introduce vm_flags to do_mmap().

---
 fs/aio.c           |  2 +-
 include/linux/mm.h |  3 ++-
 ipc/shm.c          |  2 +-
 mm/mmap.c          | 10 +++++-----
 mm/nommu.c         |  4 ++--
 mm/util.c          |  2 +-
 6 files changed, 12 insertions(+), 11 deletions(-)
fs/aio.c +1 -1
index 5b2ff20ad322..66119297125a 100644
@@ -554,7 +554,7 @@ static int aio_setup_ring(struct kioctx *ctx, unsigned int nr_events)
 
 	ctx->mmap_base = do_mmap(ctx->aio_ring_file, 0, ctx->mmap_size,
 				 PROT_READ | PROT_WRITE,
-				 MAP_SHARED, 0, &unused, NULL);
+				 MAP_SHARED, 0, 0, &unused, NULL);
 	mmap_write_unlock(mm);
 	if (IS_ERR((void *)ctx->mmap_base)) {
 		ctx->mmap_size = 0;
include/linux/mm.h +2 -1
index 0a3f7e2b32df..c9b387b905df 100644
@@ -2742,7 +2742,8 @@ extern unsigned long mmap_region(struct file *file, unsigned long addr,
 	struct list_head *uf);
 extern unsigned long do_mmap(struct file *file, unsigned long addr,
 	unsigned long len, unsigned long prot, unsigned long flags,
-	unsigned long pgoff, unsigned long *populate, struct list_head *uf);
+	vm_flags_t vm_flags, unsigned long pgoff, unsigned long *populate,
+	struct list_head *uf);
 extern int do_mas_munmap(struct ma_state *mas, struct mm_struct *mm,
 			 unsigned long start, size_t len, struct list_head *uf,
 			 bool downgrade);
ipc/shm.c +1 -1
index 7d86f058fb86..11e98de7e522 100644
@@ -1646,7 +1646,7 @@ long do_shmat(int shmid, char __user *shmaddr, int shmflg,
 			goto invalid;
 	}
 
-	addr = do_mmap(file, addr, size, prot, flags, 0, &populate, NULL);
+	addr = do_mmap(file, addr, size, prot, flags, 0, 0, &populate, NULL);
 	*raddr = addr;
 	err = 0;
 	if (IS_ERR_VALUE(addr))
mm/mmap.c +5 -5
index 4dc157869b34..47a8a7d9c560 100644
@@ -1246,11 +1246,11 @@ static inline bool file_mmap_ok(struct file *file, struct inode *inode,
  */
 unsigned long do_mmap(struct file *file, unsigned long addr,
 			unsigned long len, unsigned long prot,
-			unsigned long flags, unsigned long pgoff,
-			unsigned long *populate, struct list_head *uf)
+			unsigned long flags, vm_flags_t vm_flags,
+			unsigned long pgoff, unsigned long *populate,
+			struct list_head *uf)
 {
 	struct mm_struct *mm = current->mm;
-	vm_flags_t vm_flags;
 	int pkey = 0;
 
 	validate_mm(mm);
@@ -1311,7 +1311,7 @@ unsigned long do_mmap(struct file *file, unsigned long addr,
 	 * to. we assume access permissions have been handled by the open
 	 * of the memory object, so we don't do any here.
 	 */
-	vm_flags = calc_vm_prot_bits(prot, pkey) | calc_vm_flag_bits(flags) |
+	vm_flags |= calc_vm_prot_bits(prot, pkey) | calc_vm_flag_bits(flags) |
 			mm->def_flags | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC;
 
 	if (flags & MAP_LOCKED)
@@ -2880,7 +2880,7 @@ SYSCALL_DEFINE5(remap_file_pages, unsigned long, start, unsigned long, size,
 
 	file = get_file(vma->vm_file);
 	ret = do_mmap(vma->vm_file, start, size,
-			prot, flags, pgoff, &populate, NULL);
+			prot, flags, 0, pgoff, &populate, NULL);
 	fput(file);
 out:
 	mmap_write_unlock(mm);
mm/nommu.c +2 -2
index 214c70e1d059..20ff1ec89091 100644
@@ -1042,6 +1042,7 @@ unsigned long do_mmap(struct file *file,
 			unsigned long len,
 			unsigned long prot,
 			unsigned long flags,
+			vm_flags_t vm_flags,
 			unsigned long pgoff,
 			unsigned long *populate,
 			struct list_head *uf)
@@ -1049,7 +1050,6 @@ unsigned long do_mmap(struct file *file,
 	struct vm_area_struct *vma;
 	struct vm_region *region;
 	struct rb_node *rb;
-	vm_flags_t vm_flags;
 	unsigned long capabilities, result;
 	int ret;
 	MA_STATE(mas, &current->mm->mm_mt, 0, 0);
@@ -1069,7 +1069,7 @@ unsigned long do_mmap(struct file *file,
 
 	/* we've determined that we can make the mapping, now translate what we
 	 * now know into VMA flags */
-	vm_flags = determine_vm_flags(file, prot, flags, capabilities);
+	vm_flags |= determine_vm_flags(file, prot, flags, capabilities);
 
 
 	/* we're going to need to record the mapping */
mm/util.c +1 -1
index 12984e76767e..aefe4fae7ecf 100644
@@ -517,7 +517,7 @@ unsigned long vm_mmap_pgoff(struct file *file, unsigned long addr,
 	if (!ret) {
 		if (mmap_write_lock_killable(mm))
 			return -EINTR;
-		ret = do_mmap(file, addr, len, prot, flag, pgoff, &populate,
+		ret = do_mmap(file, addr, len, prot, flag, 0, pgoff, &populate,
 			      &uf);
 		mmap_write_unlock(mm);
 		userfaultfd_unmap_complete(mm, &uf);
Signature · 1 line
2.17.1
#42 lore raw

PATCH v3 22/37 mm: Don't allow write GUPs to shadow stack memory

In reply to Rick Edgecombe

The x86 Control-flow Enforcement Technology (CET) feature includes a new type of memory called shadow stack. This shadow stack memory has some unusual properties, which requires some core mm changes to function properly.

Shadow stack memory is writable only in very specific, controlled ways. However, since it is writable, the kernel treats it as such. As a result there remain many ways for userspace to trigger the kernel to write to shadow stack's via get_user_pages(, FOLL_WRITE) operations. To make this a little less exposed, block writable GUPs for shadow stack VMAs.

Still allow FOLL_FORCE to write through shadow stack protections, as it does for read-only protections.

---

v3:
- Add comment in __pte_access_permitted() (Dave)
- Remove unneeded shadow stack specific check in
__pte_access_permitted() (Jann)

 arch/x86/include/asm/pgtable.h | 5 +++++
 mm/gup.c                       | 2 +-
 2 files changed, 6 insertions(+), 1 deletion(-)
arch/x86/include/asm/pgtable.h +5 -0
index d57dc1b2d3e8..0d18f3a4373d 100644
@@ -1637,6 +1637,11 @@ static inline bool __pte_access_permitted(unsigned long pteval, bool write)
 {
 	unsigned long need_pte_bits = _PAGE_PRESENT|_PAGE_USER;
 
+	/*
+	 * Write=0,Dirty=1 PTEs are shadow stack, which the kernel
+	 * shouldn't generally allow access to, but since they
+	 * are already Write=0, the below logic covers both cases.
+	 */
 	if (write)
 		need_pte_bits |= _PAGE_RW;
 
mm/gup.c +1 -1
index fe195d47de74..411befd4d431 100644
@@ -1062,7 +1062,7 @@ static int check_vma_flags(struct vm_area_struct *vma, unsigned long gup_flags)
 		return -EFAULT;
 
 	if (write) {
-		if (!(vm_flags & VM_WRITE)) {
+		if (!(vm_flags & VM_WRITE) || (vm_flags & VM_SHADOW_STACK)) {
 			if (!(gup_flags & FOLL_FORCE))
 				return -EFAULT;
 			/*
Signature · 1 line
2.17.1
#43 lore raw

PATCH v3 23/37 mm: Warn on shadow stack memory in wrong vma

In reply to Rick Edgecombe

The x86 Control-flow Enforcement Technology (CET) feature includes a new type of memory called shadow stack. This shadow stack memory has some unusual properties, which requires some core mm changes to function properly.

One sharp edge is that PTEs that are both Write=0 and Dirty=1 are treated as shadow by the CPU, but this combination used to be created by the kernel on x86. Previous patches have changed the kernel to now avoid creating these PTEs unless they are for shadow stack memory. In case any missed corners of the kernel are still creating PTEs like this for non-shadow stack memory, and to catch any re-introductions of the logic, warn if any shadow stack PTEs (Write=0, Dirty=1) are found in non-shadow stack VMAs when they are being zapped. This won't catch transient cases but should have decent coverage. It will be compiled out when shadow stack is not configured.

In order to check if a pte is shadow stack in core mm code, add default implmentations for pte_shstk() and pmd_shstk().

---

v3:
- New patch

 arch/x86/include/asm/pgtable.h |  2 ++
 include/linux/pgtable.h        | 14 ++++++++++++++
 mm/huge_memory.c               |  2 ++
 mm/memory.c                    |  2 ++
 4 files changed, 20 insertions(+)
arch/x86/include/asm/pgtable.h +2 -0
index 0d18f3a4373d..051c03e59468 100644
@@ -129,6 +129,7 @@ static inline bool pte_dirty(pte_t pte)
 	return pte_flags(pte) & _PAGE_DIRTY_BITS;
 }
 
+#define pte_shstk pte_shstk
 static inline bool pte_shstk(pte_t pte)
 {
 	if (!cpu_feature_enabled(X86_FEATURE_USER_SHSTK))
@@ -147,6 +148,7 @@ static inline bool pmd_dirty(pmd_t pmd)
 	return pmd_flags(pmd) & _PAGE_DIRTY_BITS;
 }
 
+#define pmd_shstk pmd_shstk
 static inline bool pmd_shstk(pmd_t pmd)
 {
 	if (!cpu_feature_enabled(X86_FEATURE_USER_SHSTK))
include/linux/pgtable.h +14 -0
index 36926a207b6d..dd84af70b434 100644
@@ -500,6 +500,20 @@ static inline pte_t pte_mkwrite_shstk(pte_t pte)
 }
 #endif
 
+#ifndef pte_shstk
+static inline bool pte_shstk(pte_t pte)
+{
+	return false;
+}
+#endif
+
+#ifndef pmd_shstk
+static inline bool pmd_shstk(pmd_t pte)
+{
+	return false;
+}
+#endif
+
 #ifndef pte_clear_savedwrite
 #define pte_clear_savedwrite pte_wrprotect
 #endif
mm/huge_memory.c +2 -0
index 7643a4db1b50..2540f0d4c8ff 100644
@@ -1656,6 +1656,8 @@ int zap_huge_pmd(struct mmu_gather *tlb, struct vm_area_struct *vma,
 	 */
 	orig_pmd = pmdp_huge_get_and_clear_full(vma, addr, pmd,
 						tlb->fullmm);
+	VM_WARN_ON_ONCE(!(vma->vm_flags & VM_SHADOW_STACK) &&
+			pmd_shstk(orig_pmd));
 	tlb_remove_pmd_tlb_entry(tlb, pmd, addr);
 	if (vma_is_special_huge(vma)) {
 		if (arch_needs_pgtable_deposit())
mm/memory.c +2 -0
index b9bee283aad3..4331f33a02d6 100644
@@ -1437,6 +1437,8 @@ static unsigned long zap_pte_range(struct mmu_gather *tlb,
 				continue;
 			ptent = ptep_get_and_clear_full(mm, addr, pte,
 							tlb->fullmm);
+			VM_WARN_ON_ONCE(!(vma->vm_flags & VM_SHADOW_STACK) &&
+					pte_shstk(ptent));
 			tlb_remove_tlb_entry(tlb, pte, addr);
 			zap_install_uffd_wp_if_needed(vma, addr, pte, details,
 						      ptent);
Signature · 1 line
2.17.1
#44 lore raw

PATCH v3 24/37 x86: Introduce userspace API for CET enabling

In reply to Rick Edgecombe

From: "Kirill A. Shutemov" <[email protected]>

Add three new arch_prctl() handles:

- ARCH_CET_ENABLE/DISABLE enables or disables the specified feature. Returns 0 on success or an error.

- ARCH_CET_LOCK prevents future disabling or enabling of the specified feature. Returns 0 on success or an error

The features are handled per-thread and inherited over fork(2)/clone(2), but reset on exec().

This is preparation patch. It does not implement any features.

---

v3:
- Move shstk.c Makefile changes earlier (Kees)
- Add #ifdef around features_locked and features (Kees)
- Encapsulate features reset earlier in reset_thread_features() so features and features_locked are not referenced in code that would be compiled !CONFIG_X86_USER_SHADOW_STACK. (Kees)
- Fix typo in commit log (Kees)
- Switch arch_prctl() numbers to avoid conflict with LAM

v2:
- Only allow one enable/disable per call (tglx)
- Return error code like a normal arch_prctl() (Alexander Potapenko)
- Make CET only (tglx)

 arch/x86/include/asm/cet.h        | 21 +++++++++++++++
 arch/x86/include/asm/processor.h  |  5 ++++
 arch/x86/include/uapi/asm/prctl.h |  6 +++++
 arch/x86/kernel/Makefile          |  2 ++
 arch/x86/kernel/process_64.c      |  7 ++++-
 arch/x86/kernel/shstk.c           | 44 +++++++++++++++++++++++++++++++
 6 files changed, 84 insertions(+), 1 deletion(-)
 create mode 100644 arch/x86/include/asm/cet.h
 create mode 100644 arch/x86/kernel/shstk.c
arch/x86/include/asm/cet.h new file +21 -0
new file mode 100644
index 000000000000..a2f3c6e06ef5
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_X86_CET_H
+#define _ASM_X86_CET_H
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+
+struct task_struct;
+
+#ifdef CONFIG_X86_USER_SHADOW_STACK
+long cet_prctl(struct task_struct *task, int option, unsigned long features);
+void reset_thread_features(void);
+#else
+static inline long cet_prctl(struct task_struct *task, int option,
+			     unsigned long features) { return -EINVAL; }
+static inline void reset_thread_features(void) {}
+#endif /* CONFIG_X86_USER_SHADOW_STACK */
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_X86_CET_H */
arch/x86/include/asm/processor.h +5 -0
index 67c9d73b31fa..ca66d320a263 100644
@@ -530,6 +530,11 @@ struct thread_struct {
 	 */
 	u32			pkru;
 
+#ifdef CONFIG_X86_USER_SHADOW_STACK
+	unsigned long		features;
+	unsigned long		features_locked;
+#endif
+
 	/* Floating point and extended processor state */
 	struct fpu		fpu;
 	/*
arch/x86/include/uapi/asm/prctl.h +6 -0
index 500b96e71f18..2dae9997ee17 100644
@@ -20,4 +20,10 @@
 #define ARCH_MAP_VDSO_32		0x2002
 #define ARCH_MAP_VDSO_64		0x2003
 
+/* Don't use 0x3001-0x3004 because of old glibcs */
+
+#define ARCH_CET_ENABLE			0x5001
+#define ARCH_CET_DISABLE		0x5002
+#define ARCH_CET_LOCK			0x5003
+
 #endif /* _ASM_X86_PRCTL_H */
arch/x86/kernel/Makefile +2 -0
index f901658d9f7c..fbb1cb34188d 100644
@@ -143,6 +143,8 @@ obj-$(CONFIG_AMD_MEM_ENCRYPT)		+= sev.o
 
 obj-$(CONFIG_CFI_CLANG)			+= cfi.o
 
+obj-$(CONFIG_X86_USER_SHADOW_STACK)	+= shstk.o
+
 ###
 # 64 bit specific files
 ifeq ($(CONFIG_X86_64),y)
arch/x86/kernel/process_64.c +6 -1
index 6b3418bff326..17fec059317c 100644
@@ -514,6 +514,8 @@ start_thread_common(struct pt_regs *regs, unsigned long new_ip,
 		load_gs_index(__USER_DS);
 	}
 
+	reset_thread_features();
+
 	loadsegment(fs, 0);
 	loadsegment(es, _ds);
 	loadsegment(ds, _ds);
@@ -830,7 +832,10 @@ long do_arch_prctl_64(struct task_struct *task, int option, unsigned long arg2)
 	case ARCH_MAP_VDSO_64:
 		return prctl_map_vdso(&vdso_image_64, arg2);
 #endif
-
+	case ARCH_CET_ENABLE:
+	case ARCH_CET_DISABLE:
+	case ARCH_CET_LOCK:
+		return cet_prctl(task, option, arg2);
 	default:
 		ret = -EINVAL;
 		break;
arch/x86/kernel/shstk.c new file +44 -0

44 lines not on this page · raw message

Signature · 1 line
2.17.1
maintainer
#45 lore raw

Re: [PATCH v3 24/37] x86: Introduce userspace API for CET enabling

Quoted 7 lines · Rick Edgecombe

From: "Kirill A. Shutemov" <[email protected]>

Add three new arch_prctl() handles:

- ARCH_CET_ENABLE/DISABLE enables or disables the specified feature. Returns 0 on success or an error.

Quoted 7 lines

- ARCH_CET_LOCK prevents future disabling or enabling of the specified feature. Returns 0 on success or an error

The features are handled per-thread and inherited over fork(2)/clone(2), but reset on exec().

This is preparation patch. It does not implement any features.

Urgh... so much for sharing with other architectures I suppose :/

The ARM64 BTI thing is very similar to IBT (except I think their approach to the legacy bitmap is much saner).

Given that IBT isn't supported and needs the whole legacy bitmap mess, do we really want to call this CET ? Why not just make a Shadow Stack API and tackle IBT independently.

maintainer
#46 lore raw

Re: [PATCH v3 24/37] x86: Introduce userspace API for CET enabling

Quoted 16 lines · Peter Zijlstra
Quoted 7 lines · Rick Edgecombe

From: "Kirill A. Shutemov" <[email protected]>

Add three new arch_prctl() handles:

- ARCH_CET_ENABLE/DISABLE enables or disables the specified feature. Returns 0 on success or an error.

Quoted 7 lines

- ARCH_CET_LOCK prevents future disabling or enabling of the specified feature. Returns 0 on success or an error

The features are handled per-thread and inherited over fork(2)/clone(2), but reset on exec().

This is preparation patch. It does not implement any features.

Quoted 8 lines

Urgh... so much for sharing with other architectures I suppose :/

The ARM64 BTI thing is very similar to IBT (except I think their approach to the legacy bitmap is much saner).

Given that IBT isn't supported and needs the whole legacy bitmap mess, do we really want to call this CET ? Why not just make a Shadow Stack API and tackle IBT independently.

On that; ARM64 exposes PROT_BTI (to be used by mprotect()) and have an ELF_ARM64_BTI note for the loader to bootstrap things.

We could co-opt that same interface and instead of flipping actual PTE bits, have this thing manage the legacy bitmap -- basically have the legacy bitmap function as an external PTE bit array (in inverse).

Basically, have every page mapped PROT_EXEC set the bit in the legacy bitmap while every page mapped PROT_EXEC|PROT_BTI will have the legacy bitmap bit to 0.

And as long as there is a single 0 in the bitmap, the feature is enabled.

(obviously we can delay allocating the bitmap until the first PROT_EXEC mapping that lacks PROT_BTI)

#47 lore raw

Re: [PATCH v3 24/37] x86: Introduce userspace API for CET enabling

Quoted 43 lines · Peter Zijlstra
Quoted 19 lines · Peter Zijlstra
Quoted 7 lines · Rick Edgecombe

From: "Kirill A. Shutemov" <[email protected]>

Add three new arch_prctl() handles:

- ARCH_CET_ENABLE/DISABLE enables or disables the specified feature. Returns 0 on success or an error.

Quoted 8 lines

- ARCH_CET_LOCK prevents future disabling or enabling of the specified feature. Returns 0 on success or an error

The features are handled per-thread and inherited over fork(2)/clone(2),
but reset on exec().

This is preparation patch. It does not implement any features.

Urgh... so much for sharing with other architectures I suppose :/

Quoted 8 lines

The ARM64 BTI thing is very similar to IBT (except I think their approach to the legacy bitmap is much saner).

Given that IBT isn't supported and needs the whole legacy bitmap mess,
do we really want to call this CET ? Why not just make a Shadow Stack
API and tackle IBT independently.

On that; ARM64 exposes PROT_BTI (to be used by mprotect()) and have an
ELF_ARM64_BTI note for the loader to bootstrap things.

We could co-opt that same interface and instead of flipping actual PTE
bits, have this thing manage the legacy bitmap -- basically have the legacy bitmap function as an external PTE bit array (in inverse).

Basically, have every page mapped PROT_EXEC set the bit in the legacy bitmap while every page mapped PROT_EXEC|PROT_BTI will have the legacy
bitmap bit to 0.

Quoted 6 lines

And as long as there is a single 0 in the bitmap, the feature is enabled.

(obviously we can delay allocating the bitmap until the first PROT_EXEC
mapping that lacks PROT_BTI)

This is an interesting idea. I'll have to think a little more on it.

One non-impossible issue would be setting IBT in the MSR late. Each thread would have to be interrupted and have it set, while no new threads are created. Maybe this is easy and I just don't know how to do it.

The other thing is there would be overhead compared to an IBT implementation with a separate interface from BTI. Would have to look at the tradeoffs.

maintainer
#48 lore raw

Re: [PATCH v3 24/37] x86: Introduce userspace API for CET enabling

In reply to Rick Edgecombe
Quoted 2 lines · Rick Edgecombe
 arch/x86/include/asm/cet.h        | 21 +++++++++++++++
 arch/x86/kernel/shstk.c           | 44 +++++++++++++++++++++++++++++++

You see what's going wrong there? Eradicate the CET...

#49 lore raw

Re: [PATCH v3 24/37] x86: Introduce userspace API for CET enabling

Quoted 7 lines · Peter Zijlstra
Quoted 3 lines · Rick Edgecombe
  arch/x86/include/asm/cet.h        | 21 +++++++++++++++
  arch/x86/kernel/shstk.c           | 44

+++++++++++++++++++++++++++++++

You see what's going wrong there? Eradicate the CET...

Yep, will do. Thanks.

#50 lore raw

PATCH v3 25/37 x86/shstk: Add user-mode shadow stack support

In reply to Rick Edgecombe

From: Yu-cheng Yu <[email protected]>

Introduce basic shadow stack enabling/disabling/allocation routines. A task's shadow stack is allocated from memory with VM_SHADOW_STACK flag and has a fixed size of min(RLIMIT_STACK, 4GB).

Keep the task's shadow stack address and size in thread_struct. This will be copied when cloning new threads, but needs to be cleared during exec, so add a function to do this.

Do not support IA32 emulation or x32.

---

v3:
- Use define for set_clr_bits_msrl() (Kees)
- Make some functions static (Kees)
- Change feature_foo() to features_foo() (Kees)
- Centralize shadow stack size rlimit checks (Kees)
- Disable x32 support

v2:
- Get rid of unnessary shstk->base checks
- Don't support IA32 emulation

v1:
- Switch to xsave helpers.
- Expand commit log.

Yu-cheng v30:
- Remove superfluous comments for struct thread_shstk.
- Replace 'populate' with 'unused'.

 arch/x86/include/asm/cet.h        |   7 ++
 arch/x86/include/asm/msr.h        |  11 +++
 arch/x86/include/asm/processor.h  |   3 +
 arch/x86/include/uapi/asm/prctl.h |   3 +
 arch/x86/kernel/shstk.c           | 146 ++++++++++++++++++++++++++++++
 5 files changed, 170 insertions(+)
arch/x86/include/asm/cet.h +7 -0
index a2f3c6e06ef5..cade110b2ea8 100644
@@ -8,12 +8,19 @@
 struct task_struct;
 
 #ifdef CONFIG_X86_USER_SHADOW_STACK
+struct thread_shstk {
+	u64	base;
+	u64	size;
+};
+
 long cet_prctl(struct task_struct *task, int option, unsigned long features);
 void reset_thread_features(void);
+void shstk_free(struct task_struct *p);
 #else
 static inline long cet_prctl(struct task_struct *task, int option,
 			     unsigned long features) { return -EINVAL; }
 static inline void reset_thread_features(void) {}
+static inline void shstk_free(struct task_struct *p) {}
 #endif /* CONFIG_X86_USER_SHADOW_STACK */
 
 #endif /* __ASSEMBLY__ */
arch/x86/include/asm/msr.h +11 -0
index 65ec1965cd28..a4b86eb537d6 100644
@@ -310,6 +310,17 @@ void msrs_free(struct msr *msrs);
 int msr_set_bit(u32 msr, u8 bit);
 int msr_clear_bit(u32 msr, u8 bit);
 
+/* Helper that can never get accidentally un-inlined. */
+#define set_clr_bits_msrl(msr, set, clear)	do {	\
+	u64 __val, __new_val;				\
+							\
+	rdmsrl(msr, __val);				\
+	__new_val = (__val & ~(clear)) | (set);		\
+							\
+	if (__new_val != __val)				\
+		wrmsrl(msr, __new_val);			\
+} while (0)
+
 #ifdef CONFIG_SMP
 int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h);
 int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h);
arch/x86/include/asm/processor.h +3 -0
index ca66d320a263..a6c414dfd10f 100644
@@ -27,6 +27,7 @@ struct vm86;
 #include <asm/unwind_hints.h>
 #include <asm/vmxfeatures.h>
 #include <asm/vdso/processor.h>
+#include <asm/cet.h>
 
 #include <linux/personality.h>
 #include <linux/cache.h>
@@ -533,6 +534,8 @@ struct thread_struct {
 #ifdef CONFIG_X86_USER_SHADOW_STACK
 	unsigned long		features;
 	unsigned long		features_locked;
+
+	struct thread_shstk	shstk;
 #endif
 
 	/* Floating point and extended processor state */
arch/x86/include/uapi/asm/prctl.h +3 -0
index 2dae9997ee17..dad5288bf086 100644
@@ -26,4 +26,7 @@
 #define ARCH_CET_DISABLE		0x5002
 #define ARCH_CET_LOCK			0x5003
 
+/* ARCH_CET_ features bits */
+#define CET_SHSTK			(1ULL <<  0)
+
 #endif /* _ASM_X86_PRCTL_H */
arch/x86/kernel/shstk.c +146 -0

160 lines not on this page · raw message

Signature · 1 line
2.17.1
maintainer
#51 lore raw

Re: [PATCH v3 25/37] x86/shstk: Add user-mode shadow stack support

Quoted 11 lines · Rick Edgecombe
arch/x86/kernel/shstk.c +11 -0
+static int shstk_setup(void)
+{
+	struct thread_shstk *shstk = &current->thread.shstk;
+	unsigned long addr, size;
+
+	/* Already enabled */
+	if (features_enabled(CET_SHSTK))
+		return 0;
+
+	/* Also not supported for 32 bit and x32 */
+	if (!cpu_feature_enabled(X86_FEATURE_USER_SHSTK) || in_32bit_syscall())

arch/x86/kernel/shstk.c line 112

Quoted 10 lines
arch/x86/kernel/shstk.c +10 -0
+		return -EOPNOTSUPP;
+
+	size = adjust_shstk_size(0);
+	addr = alloc_shstk(size);
+	if (IS_ERR_VALUE(addr))
+		return PTR_ERR((void *)addr);
+
+	fpregs_lock_and_load();
+	wrmsrl(MSR_IA32_PL3_SSP, addr + size);
+	wrmsrl(MSR_IA32_U_CET, CET_SHSTK_EN);

This..

Quoted 11 lines
arch/x86/kernel/shstk.c +10 -0
+	fpregs_unlock();
+
+	shstk->base = addr;
+	shstk->size = size;
+	features_set(CET_SHSTK);
+
+	return 0;
+}
 
+static int shstk_disable(void)
+{

arch/x86/kernel/shstk.c line 155

Quoted 10 lines
arch/x86/kernel/shstk.c +10 -0
+	if (!cpu_feature_enabled(X86_FEATURE_USER_SHSTK))
+		return -EOPNOTSUPP;
+
+	/* Already disabled? */
+	if (!features_enabled(CET_SHSTK))
+		return 0;
+
+	fpregs_lock_and_load();
+	/* Disable WRSS too when disabling shadow stack */
+	set_clr_bits_msrl(MSR_IA32_U_CET, 0, CET_SHSTK_EN);

And this... aren't very consistent in approach. Given there is no U_IBT yet, why complicate matters like this?

Quoted 8 lines
arch/x86/kernel/shstk.c +8 -0
+	wrmsrl(MSR_IA32_PL3_SSP, 0);
+	fpregs_unlock();
+
+	shstk_free(current);
+	features_clr(CET_SHSTK);
+
+	return 0;
+}
#52 lore raw

Re: [PATCH v3 25/37] x86/shstk: Add user-mode shadow stack support

Quoted 34 lines · Peter Zijlstra
Quoted 10 lines
arch/x86/kernel/shstk.c +9 -0
+     struct thread_shstk *shstk = &current->thread.shstk;
+     unsigned long addr, size;
+
+     /* Already enabled */
+     if (features_enabled(CET_SHSTK))
+             return 0;
+
+     /* Also not supported for 32 bit and x32 */
+     if (!cpu_feature_enabled(X86_FEATURE_USER_SHSTK) ||

in_32bit_syscall())

arch/x86/kernel/shstk.c line 112

Quoted 10 lines
arch/x86/kernel/shstk.c +10 -0
+             return -EOPNOTSUPP;
+
+     size = adjust_shstk_size(0);
+     addr = alloc_shstk(size);
+     if (IS_ERR_VALUE(addr))
+             return PTR_ERR((void *)addr);
+
+     fpregs_lock_and_load();
+     wrmsrl(MSR_IA32_PL3_SSP, addr + size);
+     wrmsrl(MSR_IA32_U_CET, CET_SHSTK_EN);

This..

Quoted 11 lines
arch/x86/kernel/shstk.c +11 -0
+     fpregs_unlock();
+
+     shstk->base = addr;
+     shstk->size = size;
+     features_set(CET_SHSTK);
+
+     return 0;
+}
+static int shstk_disable(void)
+{
+     if (!cpu_feature_enabled(X86_FEATURE_USER_SHSTK))
Quoted 8 lines

arch/x86/kernel/shstk.c line 154

Quoted 8 lines
arch/x86/kernel/shstk.c +8 -0
+             return -EOPNOTSUPP;
+
+     /* Already disabled? */
+     if (!features_enabled(CET_SHSTK))
+             return 0;
+
+     fpregs_lock_and_load();
+     /* Disable WRSS too when disabling shadow stack */

Oops, this comment is in wrong patch.

Quoted 5 lines
Quoted 1 line

+ set_clr_bits_msrl(MSR_IA32_U_CET, 0, CET_SHSTK_EN);

And this... aren't very consistent in approach. Given there is no U_IBT
yet, why complicate matters like this?

Sure, I can change it.

#53 lore raw

PATCH v3 26/37 x86/shstk: Handle thread shadow stack

In reply to Rick Edgecombe

From: Yu-cheng Yu <[email protected]>

When a process is duplicated, but the child shares the address space with the parent, there is potential for the threads sharing a single stack to cause conflicts for each other. In the normal non-cet case this is handled in two ways.

With regular CLONE_VM a new stack is provided by userspace such that the parent and child have different stacks.

For vfork, the parent is suspended until the child exits. So as long as the child doesn't return from the vfork()/CLONE_VFORK calling function and sticks to a limited set of operations, the parent and child can share the same stack.

For shadow stack, these scenarios present similar sharing problems. For the CLONE_VM case, the child and the parent must have separate shadow stacks. Instead of changing clone to take a shadow stack, have the kernel just allocate one and switch to it.

Use stack_size passed from clone3() syscall for thread shadow stack size. A compat-mode thread shadow stack size is further reduced to 1/4. This allows more threads to run in a 32-bit address space. The clone() does not pass stack_size, which was added to clone3(). In that case, use RLIMIT_STACK size and cap to 4 GB.

For shadow stack enabled vfork(), the parent and child can share the same shadow stack, like they can share a normal stack. Since the parent is suspended until the child terminates, the child will not interfere with the parent while executing as long as it doesn't return from the vfork() and overwrite up the shadow stack. The child can safely overwrite down the shadow stack, as the parent can just overwrite this later. So CET does not add any additional limitations for vfork().

Userspace implementing posix vfork() can actually prevent the child from returning from the vfork() calling function, using CET. Glibc does this by adjusting the shadow stack pointer in the child, so that the child receives a #CP if it tries to return from vfork() calling function.

Free the shadow stack on thread exit by doing it in mm_release(). Skip this when exiting a vfork() child since the stack is shared in the parent.

During this operation, the shadow stack pointer of the new thread needs to be updated to point to the newly allocated shadow stack. Since the ability to do this is confined to the FPU subsystem, change fpu_clone() to take the new shadow stack pointer, and update it internally inside the FPU subsystem. This part was suggested by Thomas Gleixner.

---

v3:
- Fix update_fpu_shstk() stub (Mike Rapoport)
- Fix chunks around alloc_shstk() in wrong patch (Kees)
- Fix stack_size/flags swap (Kees)
- Use centalized stack size logic (Kees)

v2:
- Have fpu_clone() take new shadow stack pointer and update SSP in xsave buffer for new task. (tglx)

v1:
- Expand commit log.
- Add more comments.
- Switch to xsave helpers.

Yu-cheng v30:
- Update comments about clone()/clone3(). (Borislav Petkov)

 arch/x86/include/asm/cet.h         |  7 +++++
 arch/x86/include/asm/fpu/sched.h   |  3 +-
 arch/x86/include/asm/mmu_context.h |  2 ++
 arch/x86/kernel/fpu/core.c         | 41 +++++++++++++++++++++++++++-
 arch/x86/kernel/process.c          | 18 +++++++++++-
 arch/x86/kernel/shstk.c            | 44 ++++++++++++++++++++++++++++--
 6 files changed, 110 insertions(+), 5 deletions(-)
arch/x86/include/asm/cet.h +7 -0
index cade110b2ea8..1a97223e7d2f 100644
@@ -15,11 +15,18 @@ struct thread_shstk {
 
 long cet_prctl(struct task_struct *task, int option, unsigned long features);
 void reset_thread_features(void);
+int shstk_alloc_thread_stack(struct task_struct *p, unsigned long clone_flags,
+			     unsigned long stack_size,
+			     unsigned long *shstk_addr);
 void shstk_free(struct task_struct *p);
 #else
 static inline long cet_prctl(struct task_struct *task, int option,
 			     unsigned long features) { return -EINVAL; }
 static inline void reset_thread_features(void) {}
+static inline int shstk_alloc_thread_stack(struct task_struct *p,
+					   unsigned long clone_flags,
+					   unsigned long stack_size,
+					   unsigned long *shstk_addr) { return 0; }
 static inline void shstk_free(struct task_struct *p) {}
 #endif /* CONFIG_X86_USER_SHADOW_STACK */
 
arch/x86/include/asm/fpu/sched.h +2 -1
index b2486b2cbc6e..54c9c2fd1907 100644
@@ -11,7 +11,8 @@
 
 extern void save_fpregs_to_fpstate(struct fpu *fpu);
 extern void fpu__drop(struct fpu *fpu);
-extern int  fpu_clone(struct task_struct *dst, unsigned long clone_flags, bool minimal);
+extern int  fpu_clone(struct task_struct *dst, unsigned long clone_flags, bool minimal,
+		      unsigned long shstk_addr);
 extern void fpu_flush_thread(void);
 
 /*
arch/x86/include/asm/mmu_context.h +2 -0
index b8d40ddeab00..d29988cbdf20 100644
@@ -146,6 +146,8 @@ do {						\
 #else
 #define deactivate_mm(tsk, mm)			\
 do {						\
+	if (!tsk->vfork_done)			\
+		shstk_free(tsk);		\
 	load_gs_index(0);			\
 	loadsegment(fs, 0);			\
 } while (0)
arch/x86/kernel/fpu/core.c +40 -1

54 lines not on this page · raw message

arch/x86/kernel/process.c +17 -1
index c21b7347a26d..12c28161867c 100644
@@ -47,6 +47,7 @@
 #include <asm/frame.h>
 #include <asm/unwind.h>
 #include <asm/tdx.h>
+#include <asm/cet.h>
 
 #include "process.h"
 
@@ -118,6 +119,7 @@ void exit_thread(struct task_struct *tsk)
 
 	free_vm86(t);
 
+	shstk_free(tsk);
 	fpu__drop(fpu);
 }
 
@@ -139,6 +141,7 @@ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 	struct inactive_task_frame *frame;
 	struct fork_frame *fork_frame;
 	struct pt_regs *childregs;
+	unsigned long shstk_addr = 0;
 	int ret = 0;
 
 	childregs = task_pt_regs(p);
@@ -173,7 +176,13 @@ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 	frame->flags = X86_EFLAGS_FIXED;
 #endif
 
-	fpu_clone(p, clone_flags, args->fn);
+	/* Allocate a new shadow stack for pthread if needed */
+	ret = shstk_alloc_thread_stack(p, clone_flags, args->stack_size,
+				       &shstk_addr);
+	if (ret)
+		return ret;
+
+	fpu_clone(p, clone_flags, args->fn, shstk_addr);
 
 	/* Kernel thread ? */
 	if (unlikely(p->flags & PF_KTHREAD)) {
@@ -219,6 +228,13 @@ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 	if (!ret && unlikely(test_tsk_thread_flag(current, TIF_IO_BITMAP)))
 		io_bitmap_share(p);
 
+	/*
+	 * If copy_thread() if failing, don't leak the shadow stack possibly
+	 * allocated in shstk_alloc_thread_stack() above.
+	 */
+	if (ret)
+		shstk_free(p);
+
 	return ret;
 }
 
arch/x86/kernel/shstk.c +42 -2

62 lines not on this page · raw message

Signature · 1 line
2.17.1
#54 lore raw

PATCH v3 27/37 x86/shstk: Introduce routines modifying shstk

In reply to Rick Edgecombe

From: Yu-cheng Yu <[email protected]>

Shadow stack's are normally written to via CALL/RET or specific CET instuctions like RSTORSSP/SAVEPREVSSP. However during some Linux operations the kernel will need to write to directly using the ring-0 only WRUSS instruction.

A shadow stack restore token marks a restore point of the shadow stack, and the address in a token must point directly above the token, which is within the same shadow stack. This is distinctively different from other pointers on the shadow stack, since those pointers point to executable code area.

Introduce token setup and verify routines. Also introduce WRUSS, which is a kernel-mode instruction but writes directly to user shadow stack.

In future patches that enable shadow stack to work with signals, the kernel will need something to denote the point in the stack where sigreturn may be called. This will prevent attackers calling sigreturn at arbitrary places in the stack, in order to help prevent SROP attacks.

To do this, something that can only be written by the kernel needs to be placed on the shadow stack. This can be accomplished by setting bit 63 in the frame written to the shadow stack. Userspace return addresses can't have this bit set as it is in the kernel range. It is also can't be a valid restore token.

---

v3:
- Drop shstk_check_rstor_token()
- Fail put_shstk_data() if bit 63 is set in the data (Kees)
- Add comment in create_rstor_token() (Kees)
- Pull in create_rstor_token() changes from future patch (Kees)

v2:
- Add data helpers for writing to shadow stack.

v1:
- Use xsave helpers.

Yu-cheng v30:
- Update commit log, remove description about signals.
- Update various comments.
- Remove variable 'ssp' init and adjust return value accordingly.
- Check get_user_shstk_addr() return value.
- Replace 'ia32' with 'proc32'.

 arch/x86/include/asm/special_insns.h | 13 +++++
 arch/x86/kernel/shstk.c              | 73 ++++++++++++++++++++++++++++
 2 files changed, 86 insertions(+)
arch/x86/include/asm/special_insns.h +13 -0
index 35f709f619fb..6d51a87aea7f 100644
@@ -223,6 +223,19 @@ static inline void clwb(volatile void *__p)
 		: [pax] "a" (p));
 }
 
+#ifdef CONFIG_X86_USER_SHADOW_STACK
+static inline int write_user_shstk_64(u64 __user *addr, u64 val)
+{
+	asm_volatile_goto("1: wrussq %[val], (%[addr])\n"
+			  _ASM_EXTABLE(1b, %l[fail])
+			  :: [addr] "r" (addr), [val] "r" (val)
+			  :: fail);
+	return 0;
+fail:
+	return -EFAULT;
+}
+#endif /* CONFIG_X86_USER_SHADOW_STACK */
+
 #define nop() asm volatile ("nop")
 
 static inline void serialize(void)
arch/x86/kernel/shstk.c +73 -0

91 lines not on this page · raw message

Signature · 1 line
2.17.1
maintainer
#55 lore raw

Re: [PATCH v3 27/37] x86/shstk: Introduce routines modifying shstk

arch/x86/include/asm/special_insns.h static inline void clwb(volatile void *__p) · line 237

Quoted 12 lines · Rick Edgecombe
arch/x86/include/asm/special_insns.h +12 -0
+#ifdef CONFIG_X86_USER_SHADOW_STACK
+static inline int write_user_shstk_64(u64 __user *addr, u64 val)
+{
+	asm_volatile_goto("1: wrussq %[val], (%[addr])\n"
+			  _ASM_EXTABLE(1b, %l[fail])
+			  :: [addr] "r" (addr), [val] "r" (val)
+			  :: fail);
+	return 0;
+fail:
+	return -EFAULT;
+}
+#endif /* CONFIG_X86_USER_SHADOW_STACK */

Why isn't this modelled after put_user() ?

Should you write a 64bit value even if the task receiving a signal is 32bit ?

#56 lore raw

Re: [PATCH v3 27/37] x86/shstk: Introduce routines modifying shstk

Quoted 16 lines · Peter Zijlstra

arch/x86/include/asm/special_insns.h static inline void clwb(volatile void *__p) · line 237

Quoted 12 lines · Rick Edgecombe
arch/x86/include/asm/special_insns.h +12 -0
+#ifdef CONFIG_X86_USER_SHADOW_STACK
+static inline int write_user_shstk_64(u64 __user *addr, u64 val)
+{
+     asm_volatile_goto("1: wrussq %[val], (%[addr])\n"
+                       _ASM_EXTABLE(1b, %l[fail])
+                       :: [addr] "r" (addr), [val] "r" (val)
+                       :: fail);
+     return 0;
+fail:
+     return -EFAULT;
+}
+#endif /* CONFIG_X86_USER_SHADOW_STACK */

Why isn't this modelled after put_user() ?

You mean as far as supporting multiple sizes? It just isn't really needed yet. We are only writing single frames. I suppose it might make more sense with the alt shadow stack support, but that is dropped for now.

The other difference here is that WRUSS is a weird instruction that is treated as a user access even if it comes from the kernel mode. So it's doesn't need to stac/clac.

Quoted 3 lines

Should you write a 64bit value even if the task receiving a signal is 32bit ?

32 bit support was also dropped.

maintainer
#57 lore raw

Re: [PATCH v3 27/37] x86/shstk: Introduce routines modifying shstk

Quoted 28 lines · Rick P
Quoted 16 lines · Peter Zijlstra

arch/x86/include/asm/special_insns.h static inline void clwb(volatile void *__p) · line 237

Quoted 12 lines · Rick Edgecombe
arch/x86/include/asm/special_insns.h +12 -0
+#ifdef CONFIG_X86_USER_SHADOW_STACK
+static inline int write_user_shstk_64(u64 __user *addr, u64 val)
+{
+     asm_volatile_goto("1: wrussq %[val], (%[addr])\n"
+                       _ASM_EXTABLE(1b, %l[fail])
+                       :: [addr] "r" (addr), [val] "r" (val)
+                       :: fail);
+     return 0;
+fail:
+     return -EFAULT;
+}
+#endif /* CONFIG_X86_USER_SHADOW_STACK */

Why isn't this modelled after put_user() ?

You mean as far as supporting multiple sizes? It just isn't really needed yet. We are only writing single frames. I suppose it might make more sense with the alt shadow stack support, but that is dropped for now.

The other difference here is that WRUSS is a weird instruction that is treated as a user access even if it comes from the kernel mode. So it's doesn't need to stac/clac.

Quoted 1 line
Quoted 4 lines
Quoted 2 lines

Should you write a 64bit value even if the task receiving a signal is 32bit ?

32 bit support was also dropped.

How? Task could start life as 64bit, frob LDT to set up 32bit code segment and jump into it and start doing 32bit syscalls, then what?

AFAICT those 32bit syscalls will end up doing SA_IA32_ABI sigframes.

#58 lore raw

Re: [PATCH v3 27/37] x86/shstk: Introduce routines modifying shstk

Quoted 11 lines · Peter Zijlstra
Quoted 6 lines
Quoted 4 lines

Should you write a 64bit value even if the task receiving a signal is
32bit ?

32 bit support was also dropped.

How? Task could start life as 64bit, frob LDT to set up 32bit code segment and jump into it and start doing 32bit syscalls, then what?

AFAICT those 32bit syscalls will end up doing SA_IA32_ABI sigframes.

Hmm, good point. This series used to support normal 32 bit apps via ia32 emulation which would have handled this. But I removed it (blocked in the enabling logic) because it didn't seem like it would get enough use to justify the extra code. That doesn't block this scenario here though.

Pardon the possibly naive question, but is this 32/64 bit mixing something any normal, shstk-desiring, applications would actually do? O r more that they could do?

Thanks,

Rick

maintainer
#59 lore raw

Re: [PATCH v3 27/37] x86/shstk: Introduce routines modifying shstk

Quoted 19 lines · Rick P
Quoted 11 lines · Peter Zijlstra
Quoted 6 lines
Quoted 4 lines

Should you write a 64bit value even if the task receiving a signal is
32bit ?

32 bit support was also dropped.

How? Task could start life as 64bit, frob LDT to set up 32bit code segment and jump into it and start doing 32bit syscalls, then what?

AFAICT those 32bit syscalls will end up doing SA_IA32_ABI sigframes.

Hmm, good point. This series used to support normal 32 bit apps via ia32 emulation which would have handled this. But I removed it (blocked in the enabling logic) because it didn't seem like it would get enough use to justify the extra code. That doesn't block this scenario here though.

Quoted 3 lines

Pardon the possibly naive question, but is this 32/64 bit mixing something any normal, shstk-desiring, applications would actually do? O r more that they could do?

It is not something common, but it is something that things like Wine do IIRC, and it would be a real shame if Wine could not use shadow stacks or something, right ;-)

But more to the point; since the kernel cannot forbit this scenario (aside from taking away the LDT entirely) it is something that needs handling.

#60 lore raw

Re: [PATCH v3 27/37] x86/shstk: Introduce routines modifying shstk

Quoted 26 lines · Peter Zijlstra
Quoted 25 lines · Rick P
Quoted 7 lines · Peter Zijlstra
Quoted 6 lines
Quoted 4 lines

Should you write a 64bit value even if the task receiving a signal is
32bit ?

32 bit support was also dropped.

Quoted 7 lines

How? Task could start life as 64bit, frob LDT to set up 32bit code
segment and jump into it and start doing 32bit syscalls, then what?

AFAICT those 32bit syscalls will end up doing SA_IA32_ABI sigframes.

Hmm, good point. This series used to support normal 32 bit apps via ia32 emulation which would have handled this. But I removed it (blocked
in the enabling logic) because it didn't seem like it would get enough
use to justify the extra code. That doesn't block this scenario here
though.

Quoted 8 lines
Quoted 4 lines

Pardon the possibly naive question, but is this 32/64 bit mixing something any normal, shstk-desiring, applications would actually do? O
r more that they could do?

It is not something common, but it is something that things like Wine do IIRC, and it would be a real shame if Wine could not use shadow stacks or something, right ;-)

Since windows has shadow stack support, I guess. But it looks like it doesn't support shadow stacks on 32 bit either. So for the time being, it seems Wine wouldn't use this either... I think...

Quoted 4 lines

But more to the point; since the kernel cannot forbit this scenario (aside from taking away the LDT entirely) it is something that needs handling.

I'm having to go educate myself a bit on this kind of code mixing and existing ABI expectations. It seems you could also just make 32 bit syscalls from 64 bit code to trigger the same behavior.

On one hand if we think that no one will use this, it would be a shame to have to maintain 32 bit shadow stack support. But on the other hand, we have all these apps being automatically marked as supporting shadow stack. If this was not the case, I would think just declaring this unsupported would be the best.

For bringing back 32 bit support, the tricky part might be a 32 bit implementation of the new shadow stack sigframe design that supports alt shadow stacks. Setting the high bit to guarantee the frame will not point to user space won't work for 32 bit. But if we are mostly worried about making sure it is still functional we could maybe just have a slightly less protective format for the shadow stack sigframe for 32 bit. It would not have the same SROP protections. Have to think if this is a security hole for 64 bit though.

Anyway, I'm still digging on this one, and just wanted to let you know where I was at.

maintainer
#61 lore raw

Re: [PATCH v3 27/37] x86/shstk: Introduce routines modifying shstk

In reply to Rick Edgecombe

arch/x86/kernel/shstk.c int shstk_alloc_thread_stack(struct task_struct *tsk, unsigned long clone_flags, · line 205

Quoted 12 lines · Rick Edgecombe
arch/x86/kernel/shstk.c +12 -0
+static unsigned long get_user_shstk_addr(void)
+{
+	unsigned long long ssp;
+
+	fpregs_lock_and_load();
+
+	rdmsrl(MSR_IA32_PL3_SSP, ssp);
+
+	fpregs_unlock();
+
+	return ssp;
+}

This doesn't return the shstk addr, unlike what the name suggests, right?

#62 lore raw

Re: [PATCH v3 27/37] x86/shstk: Introduce routines modifying shstk

Quoted 16 lines · Peter Zijlstra

arch/x86/kernel/shstk.c int shstk_alloc_thread_stack(struct task_struct *tsk, unsigned long clone_flags, · line 205

Quoted 12 lines · Rick Edgecombe
arch/x86/kernel/shstk.c +12 -0
+static unsigned long get_user_shstk_addr(void)
+{
+     unsigned long long ssp;
+
+     fpregs_lock_and_load();
+
+     rdmsrl(MSR_IA32_PL3_SSP, ssp);
+
+     fpregs_unlock();
+
+     return ssp;
+}

This doesn't return the shstk addr, unlike what the name suggests, right?

That's a good point. get_user_ssp() would be a better name.

#63 lore raw

PATCH v3 28/37 x86/shstk: Handle signals for shadow stack

In reply to Rick Edgecombe

From: Yu-cheng Yu <[email protected]>

When a signal is handled normally the context is pushed to the stack before handling it. For shadow stacks, since the shadow stack only track's return addresses, there isn't any state that needs to be pushed. However, there are still a few things that need to be done. These things are userspace visible and which will be kernel ABI for shadow stacks.

One is to make sure the restorer address is written to shadow stack, since the signal handler (if not changing ucontext) returns to the restorer, and the restorer calls sigreturn. So add the restorer on the shadow stack before handling the signal, so there is not a conflict when the signal handler returns to the restorer.

The other thing to do is to place some type of checkable token on the thread's shadow stack before handling the signal and check it during sigreturn. This is an extra layer of protection to hamper attackers calling sigreturn manually as in SROP-like attacks.

For this token we can use the shadow stack data format defined earlier. Have the data pushed be the previous SSP. In the future the sigreturn might want to return back to a different stack. Storing the SSP (instead of a restore offset or something) allows for future functionality that may want to restore to a different stack.

So, when handling a signal push
- the SSP pointing in the shadow stack data format
- the restorer address below the restore token.

In sigreturn, verify SSP is stored in the data format and pop the shadow stack.

---

v3:
- Drop shstk_setup_rstor_token() (Kees)
- Drop x32 signal support, since x32 support is dropped

v2:
- Switch to new shstk signal format

v1:
- Use xsave helpers.
- Expand commit log.

Yu-cheng v27:
- Eliminate saving shadow stack pointer to signal context.

Yu-cheng v25:
- Update commit log/comments for the sc_ext struct.
- Use restorer address already calculated.
- Change CONFIG_X86_CET to CONFIG_X86_SHADOW_STACK.
- Change X86_FEATURE_CET to X86_FEATURE_SHSTK.
- Eliminate writing to MSR_IA32_U_CET for shadow stack.
- Change wrmsrl() to wrmsrl_safe() and handle error.

 arch/x86/ia32/ia32_signal.c |  1 +
 arch/x86/include/asm/cet.h  |  5 ++
 arch/x86/kernel/shstk.c     | 98 +++++++++++++++++++++++++++++++++++++
 arch/x86/kernel/signal.c    |  7 +++
 4 files changed, 111 insertions(+)
arch/x86/ia32/ia32_signal.c +1 -0
index c9c3859322fa..88d71b9de616 100644
@@ -34,6 +34,7 @@
 #include <asm/sigframe.h>
 #include <asm/sighandling.h>
 #include <asm/smap.h>
+#include <asm/cet.h>
 
 static inline void reload_segments(struct sigcontext_32 *sc)
 {
arch/x86/include/asm/cet.h +5 -0
index 1a97223e7d2f..098e4ecfdf9b 100644
@@ -6,6 +6,7 @@
 #include <linux/types.h>
 
 struct task_struct;
+struct ksignal;
 
 #ifdef CONFIG_X86_USER_SHADOW_STACK
 struct thread_shstk {
@@ -19,6 +20,8 @@ int shstk_alloc_thread_stack(struct task_struct *p, unsigned long clone_flags,
 			     unsigned long stack_size,
 			     unsigned long *shstk_addr);
 void shstk_free(struct task_struct *p);
+int setup_signal_shadow_stack(struct ksignal *ksig);
+int restore_signal_shadow_stack(void);
 #else
 static inline long cet_prctl(struct task_struct *task, int option,
 			     unsigned long features) { return -EINVAL; }
@@ -28,6 +31,8 @@ static inline int shstk_alloc_thread_stack(struct task_struct *p,
 					   unsigned long stack_size,
 					   unsigned long *shstk_addr) { return 0; }
 static inline void shstk_free(struct task_struct *p) {}
+static inline int setup_signal_shadow_stack(struct ksignal *ksig) { return 0; }
+static inline int restore_signal_shadow_stack(void) { return 0; }
 #endif /* CONFIG_X86_USER_SHADOW_STACK */
 
 #endif /* __ASSEMBLY__ */
arch/x86/kernel/shstk.c +98 -0

104 lines not on this page · raw message

arch/x86/kernel/signal.c +7 -0
index 9c7265b524c7..be25f7dce2d5 100644
@@ -47,6 +47,7 @@
 #include <asm/syscall.h>
 #include <asm/sigframe.h>
 #include <asm/signal.h>
+#include <asm/cet.h>
 
 #ifdef CONFIG_X86_64
 /*
@@ -472,6 +473,9 @@ static int __setup_rt_frame(int sig, struct ksignal *ksig,
 	frame = get_sigframe(&ksig->ka, regs, sizeof(struct rt_sigframe), &fp);
 	uc_flags = frame_uc_flags(regs);
 
+	if (setup_signal_shadow_stack(ksig))
+		return -EFAULT;
+
 	if (!user_access_begin(frame, sizeof(*frame)))
 		return -EFAULT;
 
@@ -675,6 +679,9 @@ SYSCALL_DEFINE0(rt_sigreturn)
 	if (!restore_sigcontext(regs, &frame->uc.uc_mcontext, uc_flags))
 		goto badframe;
 
+	if (restore_signal_shadow_stack())
+		goto badframe;
+
 	if (restore_altstack(&frame->uc.uc_stack))
 		goto badframe;
 
Signature · 1 line
2.17.1
#64 lore raw

PATCH v3 29/37 x86/shstk: Introduce map_shadow_stack syscall

In reply to Rick Edgecombe

When operating with shadow stacks enabled, the kernel will automatically allocate shadow stacks for new threads, however in some cases userspace will need additional shadow stacks. The main example of this is the ucontext family of functions, which require userspace allocating and pivoting to userspace managed stacks.

Unlike most other user memory permissions, shadow stacks need to be provisioned with special data in order to be useful. They need to be setup with a restore token so that userspace can pivot to them via the RSTORSSP instruction. But, the security design of shadow stack's is that they should not be written to except in limited circumstances. This presents a problem for userspace, as to how userspace can provision this special data, without allowing for the shadow stack to be generally writable.

Previously, a new PROT_SHADOW_STACK was attempted, which could be mprotect()ed from RW permissions after the data was provisioned. This was found to not be secure enough, as other thread's could write to the shadow stack during the writable window.

The kernel can use a special instruction, WRUSS, to write directly to userspace shadow stacks. So the solution can be that memory can be mapped as shadow stack permissions from the beginning (never generally writable in userspace), and the kernel itself can write the restore token.

First, a new madvise() flag was explored, which could operate on the PROT_SHADOW_STACK memory. This had a couple downsides:
1. Extra checks were needed in mprotect() to prevent writable memory from ever becoming PROT_SHADOW_STACK.
2. Extra checks/vma state were needed in the new madvise() to prevent restore tokens being written into the middle of pre-used shadow stacks. It is ideal to prevent restore tokens being added at arbitrary locations, so the check was to make sure the shadow stack had never been written to.
3. It stood out from the rest of the madvise flags, as more of direct action than a hint at future desired behavior.

So rather than repurpose two existing syscalls (mmap, madvise) that don't quite fit, just implement a new map_shadow_stack syscall to allow userspace to map and setup new shadow stacks in one step. While ucontext is the primary motivator, userspace may have other unforeseen reasons to setup it's own shadow stacks using the WRSS instruction. Towards this provide a flag so that stacks can be optionally setup securely for the common case of ucontext without enabling WRSS. Or potentially have the kernel set up the shadow stack in some new way.

The following example demonstrates how to create a new shadow stack with map_shadow_stack:
void *shstk = map_shadow_stack(adrr, stack_size, SHADOW_STACK_SET_TOKEN);

---

v3:
- Change syscall common -> 64 (Kees)
- Use bit shift notation instead of 0x1 for uapi header (Kees)
- Call do_mmap() with MAP_FIXED_NOREPLACE (Kees)
- Block unsupported flags (Kees)
- Require size >= 8 to set token (Kees)

v2:
- Change syscall to take address like mmap() for CRIU's usage

v1:
- New patch (replaces PROT_SHADOW_STACK).

 arch/x86/entry/syscalls/syscall_64.tbl |  1 +
 arch/x86/include/uapi/asm/mman.h       |  3 ++
 arch/x86/kernel/shstk.c                | 57 ++++++++++++++++++++++----
 include/linux/syscalls.h               |  1 +
 include/uapi/asm-generic/unistd.h      |  2 +-
 kernel/sys_ni.c                        |  1 +
 6 files changed, 56 insertions(+), 9 deletions(-)
arch/x86/entry/syscalls/syscall_64.tbl +1 -0
index c84d12608cd2..f65c671ce3b1 100644
@@ -372,6 +372,7 @@
 448	common	process_mrelease	sys_process_mrelease
 449	common	futex_waitv		sys_futex_waitv
 450	common	set_mempolicy_home_node	sys_set_mempolicy_home_node
+451	64	map_shadow_stack	sys_map_shadow_stack
 
 #
 # Due to a historical design error, certain syscalls are numbered differently
arch/x86/include/uapi/asm/mman.h +3 -0
index 775dbd3aff73..15c5a1c4fc29 100644
@@ -12,6 +12,9 @@
 		((key) & 0x8 ? VM_PKEY_BIT3 : 0))
 #endif
 
+/* Flags for map_shadow_stack(2) */
+#define SHADOW_STACK_SET_TOKEN	(1ULL << 0)	/* Set up a restore token in the shadow stack */
+
 #include <asm-generic/mman.h>
 
 #endif /* _ASM_X86_MMAN_H */
arch/x86/kernel/shstk.c +49 -8

94 lines not on this page · raw message

include/linux/syscalls.h +1 -0
index a34b0f9a9972..3ae05cbdea5b 100644
@@ -1056,6 +1056,7 @@ asmlinkage long sys_memfd_secret(unsigned int flags);
 asmlinkage long sys_set_mempolicy_home_node(unsigned long start, unsigned long len,
 					    unsigned long home_node,
 					    unsigned long flags);
+asmlinkage long sys_map_shadow_stack(unsigned long addr, unsigned long size, unsigned int flags);
 
 /*
  * Architecture-specific system calls
include/uapi/asm-generic/unistd.h +1 -1
index 45fa180cc56a..b12940ec5926 100644
@@ -887,7 +887,7 @@ __SYSCALL(__NR_futex_waitv, sys_futex_waitv)
 __SYSCALL(__NR_set_mempolicy_home_node, sys_set_mempolicy_home_node)
 
 #undef __NR_syscalls
-#define __NR_syscalls 451
+#define __NR_syscalls 452
 
 /*
  * 32 bit systems traditionally used different
kernel/sys_ni.c +1 -0
index 860b2dcf3ac4..cb9aebd34646 100644
@@ -381,6 +381,7 @@ COND_SYSCALL(vm86old);
 COND_SYSCALL(modify_ldt);
 COND_SYSCALL(vm86);
 COND_SYSCALL(kexec_file_load);
+COND_SYSCALL(map_shadow_stack);
 
 /* s390 */
 COND_SYSCALL(s390_pci_mmio_read);
Signature · 1 line
2.17.1
#65 lore raw

PATCH v3 30/37 x86/shstk: Support wrss for userspace

In reply to Rick Edgecombe

For the current shadow stack implementation, shadow stacks contents can't easily be provisioned with arbitrary data. This property helps apps protect themselves better, but also restricts any potential apps that may want to do exotic things at the expense of a little security.

The x86 shadow stack feature introduces a new instruction, wrss, which can be enabled to write directly to shadow stack permissioned memory from userspace. Allow it to get enabled via the prctl interface.

Only enable the userspace wrss instruction, which allows writes to userspace shadow stacks from userspace. Do not allow it to be enabled independently of shadow stack, as HW does not support using WRSS when shadow stack is disabled.

From a fault handler perspective, WRSS will behave very similar to WRUSS, which is treated like a user access from a #PF err code perspective.

---

v3:
- Make wrss_control() static
- Fix verbiage in commit log (Kees)

v2:
- Add some commit log verbiage from (Dave Hansen)

v1:
- New patch.

 arch/x86/include/uapi/asm/prctl.h |  1 +
 arch/x86/kernel/shstk.c           | 33 +++++++++++++++++++++++++++++--
 2 files changed, 32 insertions(+), 2 deletions(-)
arch/x86/include/uapi/asm/prctl.h +1 -0
index dad5288bf086..5f1d3181e4a1 100644
@@ -28,5 +28,6 @@
 
 /* ARCH_CET_ features bits */
 #define CET_SHSTK			(1ULL <<  0)
+#define CET_WRSS			(1ULL <<  1)
 
 #endif /* _ASM_X86_PRCTL_H */
arch/x86/kernel/shstk.c +31 -2
index 9a025eea520f..cbd0970b26d7 100644
@@ -364,6 +364,35 @@ void shstk_free(struct task_struct *tsk)
 	unmap_shadow_stack(shstk->base, shstk->size);
 }
 
+static int wrss_control(bool enable)
+{
+	if (!cpu_feature_enabled(X86_FEATURE_USER_SHSTK))
+		return -EOPNOTSUPP;
+
+	/*
+	 * Only enable wrss if shadow stack is enabled. If shadow stack is not
+	 * enabled, wrss will already be disabled, so don't bother clearing it
+	 * when disabling.
+	 */
+	if (!features_enabled(CET_SHSTK))
+		return -EPERM;
+
+	/* Already enabled/disabled? */
+	if (features_enabled(CET_WRSS) == enable)
+		return 0;
+
+	fpregs_lock_and_load();
+	if (enable) {
+		set_clr_bits_msrl(MSR_IA32_U_CET, CET_WRSS_EN, 0);
+		features_set(CET_WRSS);
+	} else {
+		set_clr_bits_msrl(MSR_IA32_U_CET, 0, CET_WRSS_EN);
+		features_clr(CET_WRSS);
+	}
+	fpregs_unlock();
+
+	return 0;
+}
 
 static int shstk_disable(void)
 {
@@ -376,12 +405,12 @@ static int shstk_disable(void)
 
 	fpregs_lock_and_load();
 	/* Disable WRSS too when disabling shadow stack */
-	set_clr_bits_msrl(MSR_IA32_U_CET, 0, CET_SHSTK_EN);
+	set_clr_bits_msrl(MSR_IA32_U_CET, 0, CET_SHSTK_EN | CET_WRSS_EN);
 	wrmsrl(MSR_IA32_PL3_SSP, 0);
 	fpregs_unlock();
 
 	shstk_free(current);
-	features_clr(CET_SHSTK);
+	features_clr(CET_SHSTK | CET_WRSS);
 
 	return 0;
 }
Signature · 1 line
2.17.1
#66 lore raw

PATCH v3 31/37 x86: Expose thread features in /proc/$PID/status

In reply to Rick Edgecombe

Applications and loaders can have logic to decide whether to enable CET. They usually don't report whether CET has been enabled or not, so there is no way to verify whether an application actually is protected by CET features.

Add two lines in /proc/$PID/status to report enabled and locked features.

Since, this involves referring to arch specific defines in asm/prctl.h, implement an arch breakout to emit the feature lines.

---

v3:
- Move to /proc/pid/status (Kees)

v2:
- New patch

 arch/x86/kernel/cpu/proc.c | 23 +++++++++++++++++++++++
 fs/proc/array.c            |  6 ++++++
 include/linux/proc_fs.h    |  2 ++
 3 files changed, 31 insertions(+)
arch/x86/kernel/cpu/proc.c +23 -0
index 099b6f0d96bd..105587d43500 100644
@@ -4,6 +4,8 @@
 #include <linux/string.h>
 #include <linux/seq_file.h>
 #include <linux/cpufreq.h>
+#include <asm/prctl.h>
+#include <linux/proc_fs.h>
 
 #include "cpu.h"
 
@@ -175,3 +177,24 @@ const struct seq_operations cpuinfo_op = {
 	.stop	= c_stop,
 	.show	= show_cpuinfo,
 };
+
+#ifdef CONFIG_X86_USER_SHADOW_STACK
+static void dump_x86_features(struct seq_file *m, unsigned long features)
+{
+	if (features & CET_SHSTK)
+		seq_puts(m, "shstk ");
+	if (features & CET_WRSS)
+		seq_puts(m, "wrss ");
+}
+
+void arch_proc_pid_thread_features(struct seq_file *m, struct task_struct *task)
+{
+	seq_puts(m, "x86_Thread_features:\t");
+	dump_x86_features(m, task->thread.features);
+	seq_putc(m, '\n');
+
+	seq_puts(m, "x86_Thread_features_locked:\t");
+	dump_x86_features(m, task->thread.features_locked);
+	seq_putc(m, '\n');
+}
+#endif /* CONFIG_X86_USER_SHADOW_STACK */
fs/proc/array.c +6 -0
index 49283b8103c7..7ac43ecda1c2 100644
@@ -428,6 +428,11 @@ static inline void task_thp_status(struct seq_file *m, struct mm_struct *mm)
 	seq_printf(m, "THP_enabled:\t%d\n", thp_enabled);
 }
 
+__weak void arch_proc_pid_thread_features(struct seq_file *m,
+					  struct task_struct *task)
+{
+}
+
 int proc_pid_status(struct seq_file *m, struct pid_namespace *ns,
 			struct pid *pid, struct task_struct *task)
 {
@@ -451,6 +456,7 @@ int proc_pid_status(struct seq_file *m, struct pid_namespace *ns,
 	task_cpus_allowed(m, task);
 	cpuset_task_status_allowed(m, task);
 	task_context_switch_counts(m, task);
+	arch_proc_pid_thread_features(m, task);
 	return 0;
 }
 
include/linux/proc_fs.h +2 -0
index 81d6e4ec2294..5a8b21c0a587 100644
@@ -158,6 +158,8 @@ int proc_pid_arch_status(struct seq_file *m, struct pid_namespace *ns,
 			struct pid *pid, struct task_struct *task);
 #endif /* CONFIG_PROC_PID_ARCH_STATUS */
 
+void arch_proc_pid_thread_features(struct seq_file *m, struct task_struct *task);
+
 #else /* CONFIG_PROC_FS */
 
 static inline void proc_root_init(void)
Signature · 1 line
2.17.1
#67 lore raw

PATCH v3 32/37 x86/cet/shstk: Wire in CET interface

In reply to Rick Edgecombe

The kernel now has the main CET functionality to support applications. Wire in the WRSS and shadow stack enable/disable functions into the existing CET API skeleton.

---

v2:
- Split from other patches

 arch/x86/kernel/shstk.c | 8 ++++++++
 1 file changed, 8 insertions(+)
arch/x86/kernel/shstk.c +8 -0
index cbd0970b26d7..71620b77a654 100644
@@ -463,9 +463,17 @@ long cet_prctl(struct task_struct *task, int option, unsigned long features)
 		return -EINVAL;
 
 	if (option == ARCH_CET_DISABLE) {
+		if (features & CET_WRSS)
+			return wrss_control(false);
+		if (features & CET_SHSTK)
+			return shstk_disable();
 		return -EINVAL;
 	}
 
 	/* Handle ARCH_CET_ENABLE */
+	if (features & CET_SHSTK)
+		return shstk_setup();
+	if (features & CET_WRSS)
+		return wrss_control(true);
 	return -EINVAL;
 }
Signature · 1 line
2.17.1
#68 lore raw

PATCH v3 33/37 selftests/x86: Add shadow stack test

In reply to Rick Edgecombe

Add a simple selftest for exercising some shadow stack behavior:
- map_shadow_stack syscall and pivot
- Faulting in shadow stack memory
- Handling shadow stack violations
- GUP of shadow stack memory
- mprotect() of shadow stack memory
- Userfaultfd on shadow stack memory

Since this test exercises a recently added syscall manually, it needs to find the automatically created __NR_foo defines. Per the selftest documentation, KHDR_INCLUDES can be used to help the selftest Makefile's find the headers from the kernel source. This way the new selftest can be built inside the kernel source tree without installing the headers to the system. So also add KHDR_INCLUDES as described in the selftest docs, to facilitate this.

---

v3:
- Change "+m" to "=m" in write_shstk() (Andrew Cooper)
- Fix userfaultfd test with transparent huge pages by doing a MADV_DONTNEED, since the token write faults in the while stack with huge pages.

v2:
- Change print statements to more align with other selftests
- Add more tests
- Add KHDR_INCLUDES to Makefile

v1:
- New patch.

 tools/testing/selftests/x86/Makefile          |   4 +-
 .../testing/selftests/x86/test_shadow_stack.c | 574 ++++++++++++++++++
 2 files changed, 576 insertions(+), 2 deletions(-)
 create mode 100644 tools/testing/selftests/x86/test_shadow_stack.c
tools/testing/selftests/x86/Makefile +2 -2
index 0388c4d60af0..cfc8a26ad151 100644
@@ -18,7 +18,7 @@ TARGETS_C_32BIT_ONLY := entry_from_vm86 test_syscall_vdso unwind_vdso \
 			test_FCMOV test_FCOMI test_FISTTP \
 			vdso_restorer
 TARGETS_C_64BIT_ONLY := fsgsbase sysret_rip syscall_numbering \
-			corrupt_xstate_header amx
+			corrupt_xstate_header amx test_shadow_stack
 # Some selftests require 32bit support enabled also on 64bit systems
 TARGETS_C_32BIT_NEEDED := ldt_gdt ptrace_syscall
 
@@ -34,7 +34,7 @@ BINARIES_64 := $(TARGETS_C_64BIT_ALL:%=%_64)
 BINARIES_32 := $(patsubst %,$(OUTPUT)/%,$(BINARIES_32))
 BINARIES_64 := $(patsubst %,$(OUTPUT)/%,$(BINARIES_64))
 
-CFLAGS := -O2 -g -std=gnu99 -pthread -Wall
+CFLAGS := -O2 -g -std=gnu99 -pthread -Wall $(KHDR_INCLUDES)
 
 # call32_from_64 in thunks.S uses absolute addresses.
 ifeq ($(CAN_BUILD_WITH_NOPIE),1)
tools/testing/selftests/x86/test_shadow_stack.c new file +574 -0

574 lines not on this page · raw message

Signature · 1 line
2.17.1
#69 lore raw

PATCH v3 34/37 x86/fpu: Add helper for initing features

In reply to Rick Edgecombe

If an xfeature is saved in a buffer, the xfeature's bit will be set in xsave->header.xfeatures. The CPU may opt to not save the xfeature if it is in it's init state. In this case the xfeature buffer address cannot be retrieved with get_xsave_addr().

Future patches will need to handle the case of writing to an xfeature that may not be saved. So provide helpers to init an xfeature in an xsave buffer.

This could of course be done directly by reaching into the xsave buffer, however this would not be robust against future changes to optimize the xsave buffer by compacting it. In that case the xsave buffer would need to be re-arranged as well. So the logic properly belongs encapsulated in a helper where the logic can be unified.

---

v2:
- New patch

 arch/x86/kernel/fpu/xstate.c | 58 +++++++++++++++++++++++++++++-------
 arch/x86/kernel/fpu/xstate.h |  6 ++++
 2 files changed, 53 insertions(+), 11 deletions(-)
arch/x86/kernel/fpu/xstate.c +47 -11
index 959d4dd64434..665737559a1f 100644
@@ -934,6 +934,24 @@ static void *__raw_xsave_addr(struct xregs_state *xsave, int xfeature_nr)
 	return (void *)xsave + xfeature_get_offset(xcomp_bv, xfeature_nr);
 }
 
+static int xsave_buffer_access_checks(int xfeature_nr)
+{
+	/*
+	 * Do we even *have* xsave state?
+	 */
+	if (!boot_cpu_has(X86_FEATURE_XSAVE))
+		return 1;
+
+	/*
+	 * We should not ever be requesting features that we
+	 * have not enabled.
+	 */
+	if (WARN_ON_ONCE(!xfeature_enabled(xfeature_nr)))
+		return 1;
+
+	return 0;
+}
+
 /*
  * Given the xsave area and a state inside, this function returns the
  * address of the state.
@@ -954,17 +972,7 @@ static void *__raw_xsave_addr(struct xregs_state *xsave, int xfeature_nr)
  */
 void *get_xsave_addr(struct xregs_state *xsave, int xfeature_nr)
 {
-	/*
-	 * Do we even *have* xsave state?
-	 */
-	if (!boot_cpu_has(X86_FEATURE_XSAVE))
-		return NULL;
-
-	/*
-	 * We should not ever be requesting features that we
-	 * have not enabled.
-	 */
-	if (WARN_ON_ONCE(!xfeature_enabled(xfeature_nr)))
+	if (xsave_buffer_access_checks(xfeature_nr))
 		return NULL;
 
 	/*
@@ -984,6 +992,34 @@ void *get_xsave_addr(struct xregs_state *xsave, int xfeature_nr)
 	return __raw_xsave_addr(xsave, xfeature_nr);
 }
 
+/*
+ * Given the xsave area and a state inside, this function
+ * initializes an xfeature in the buffer.
+ *
+ * get_xsave_addr() will return NULL if the feature bit is
+ * not present in the header. This function will make it so
+ * the xfeature buffer address is ready to be retrieved by
+ * get_xsave_addr().
+ *
+ * Inputs:
+ *	xstate: the thread's storage area for all FPU data
+ *	xfeature_nr: state which is defined in xsave.h (e.g. XFEATURE_FP,
+ *	XFEATURE_SSE, etc...)
+ * Output:
+ *	1 if the feature cannot be inited, 0 on success
+ */
+int init_xfeature(struct xregs_state *xsave, int xfeature_nr)
+{
+	if (xsave_buffer_access_checks(xfeature_nr))
+		return 1;
+
+	/*
+	 * Mark the feature inited.
+	 */
+	xsave->header.xfeatures |= BIT_ULL(xfeature_nr);
+	return 0;
+}
+
 #ifdef CONFIG_ARCH_HAS_PKEYS
 
 /*
arch/x86/kernel/fpu/xstate.h +6 -0
index 5ad47031383b..fb8aae678e9f 100644
@@ -54,6 +54,12 @@ extern void fpu__init_cpu_xstate(void);
 extern void fpu__init_system_xstate(unsigned int legacy_size);
 
 extern void *get_xsave_addr(struct xregs_state *xsave, int xfeature_nr);
+extern int init_xfeature(struct xregs_state *xsave, int xfeature_nr);
+
+static inline int xfeature_saved(struct xregs_state *xsave, int xfeature_nr)
+{
+	return xsave->header.xfeatures & BIT_ULL(xfeature_nr);
+}
 
 static inline u64 xfeatures_mask_supervisor(void)
 {
Signature · 1 line
2.17.1
#70 lore raw

PATCH v3 35/37 x86/cet: Add PTRACE interface for CET

In reply to Rick Edgecombe

From: Yu-cheng Yu <[email protected]>

Some applications (like GDB and CRIU) would like to tweak CET state via ptrace. This allows for existing functionality to continue to work for seized CET applications. Provide an interface based on the xsave buffer format of CET, but filter unneeded states to make the kernel’s job easier.

There is already ptrace functionality for accessing xstate, but this does not include supervisor xfeatures. So there is not a completely clear place for where to put the CET state. Adding it to the user xfeatures regset would complicate that code, as it currently shares logic with signals which should not have supervisor features.

Don’t add a general supervisor xfeature regset like the user one, because it is better to maintain flexibility for other supervisor xfeatures to define their own interface. For example, an xfeature may decide not to expose all of it’s state to userspace. A lot of enum values remain to be used, so just put it in dedicated CET regset.

The only downside to not having a generic supervisor xfeature regset, is that apps need to be enlightened of any new supervisor xfeature exposed this way (i.e. they can’t try to have generic save/restore logic). But maybe that is a good thing, because they have to think through each new xfeature instead of encountering issues when new a new supervisor xfeature was added.

By adding a CET regset, it also has the effect of including the CET state in a core dump, which could be useful for debugging.

Inside the setter CET regset, filter out invalid state. Today this includes states disallowed by the HW and states involving Indirect Branch Tracking which the kernel does not currently support for usersapce.

So this leaves three pieces of data that can be set, shadow stack enablement, WRSS enablement and the shadow stack pointer. It is worth noting that this is separate than enabling shadow stack via the arch_prctl()s. Enabling shadow stack involves more than just flipping the bit. The kernel is made aware that it has to do extra things when cloning or handling signals. That logic is triggered off of separate feature enablement state kept in the task struct. So the flipping on HW shadow stack enforcement without notifying the kernel to change its behavior would severely limit what an application could do without crashing. Since there is likely no use for this, only allow the CET registers to be set if shadow stack is already enabled via the arch_prctl()s. This will let apps like GDB toggle shadow stack enforcement for apps that already have shadow stack enabled, and minimize scenarios the kernel has to worry about.

---

v3:
- Drop dependence on thread.shstk.size, and use thread.features bits
- Drop 32 bit support

v2:
- Check alignment on ssp.
- Block IBT bits.
- Handle init states instead of returning error.
- Add verbose commit log justifying the design.

Yu-Cheng v12:
- Return -ENODEV when CET registers are in INIT state.
- Check reserved/non-support bits from user input.

 arch/x86/include/asm/fpu/regset.h |  7 +--
 arch/x86/include/asm/msr-index.h  |  5 ++
 arch/x86/kernel/fpu/regset.c      | 90 +++++++++++++++++++++++++++++++
 arch/x86/kernel/ptrace.c          | 20 +++++++
 include/uapi/linux/elf.h          |  1 +
 5 files changed, 120 insertions(+), 3 deletions(-)
arch/x86/include/asm/fpu/regset.h +4 -3
index 4f928d6a367b..8622184d87f5 100644
@@ -7,11 +7,12 @@
 
 #include <linux/regset.h>
 
-extern user_regset_active_fn regset_fpregs_active, regset_xregset_fpregs_active;
+extern user_regset_active_fn regset_fpregs_active, regset_xregset_fpregs_active,
+				cetregs_active;
 extern user_regset_get2_fn fpregs_get, xfpregs_get, fpregs_soft_get,
-				 xstateregs_get;
+				 xstateregs_get, cetregs_get;
 extern user_regset_set_fn fpregs_set, xfpregs_set, fpregs_soft_set,
-				 xstateregs_set;
+				 xstateregs_set, cetregs_set;
 
 /*
  * xstateregs_active == regset_fpregs_active. Please refer to the comment
arch/x86/include/asm/msr-index.h +5 -0
index 10ac52705892..674c508798ee 100644
@@ -437,6 +437,11 @@
 #define CET_RESERVED			(BIT_ULL(6) | BIT_ULL(7) | BIT_ULL(8) | BIT_ULL(9))
 #define CET_SUPPRESS			BIT_ULL(10)
 #define CET_WAIT_ENDBR			BIT_ULL(11)
+#define CET_EG_LEG_BITMAP_BASE_MASK	GENMASK_ULL(63, 13)
+
+#define CET_U_IBT_MASK			(CET_ENDBR_EN | CET_LEG_IW_EN | CET_NO_TRACK_EN | \
+					 CET_NO_TRACK_EN | CET_SUPPRESS_DISABLE | CET_SUPPRESS | \
+					 CET_WAIT_ENDBR | CET_EG_LEG_BITMAP_BASE_MASK)
 
 #define MSR_IA32_PL0_SSP		0x000006a4 /* ring-0 shadow stack pointer */
 #define MSR_IA32_PL1_SSP		0x000006a5 /* ring-1 shadow stack pointer */
arch/x86/kernel/fpu/regset.c +90 -0

102 lines not on this page · raw message

arch/x86/kernel/ptrace.c +20 -0
index eed8a65d335d..f9e6635b69ce 100644
@@ -51,6 +51,7 @@ enum x86_regset_32 {
 	REGSET_XSTATE32,
 	REGSET_TLS32,
 	REGSET_IOPERM32,
+	REGSET_CET32,
 };
 
 enum x86_regset_64 {
@@ -58,6 +59,7 @@ enum x86_regset_64 {
 	REGSET_FP64,
 	REGSET_IOPERM64,
 	REGSET_XSTATE64,
+	REGSET_CET64,
 };
 
 #define REGSET_GENERAL \
@@ -1267,6 +1269,15 @@ static struct user_regset x86_64_regsets[] __ro_after_init = {
 		.active		= ioperm_active,
 		.regset_get	= ioperm_get
 	},
+	[REGSET_CET64] = {
+		.core_note_type	= NT_X86_CET,
+		.n		= sizeof(struct cet_user_state) / sizeof(u64),
+		.size		= sizeof(u64),
+		.align		= sizeof(u64),
+		.active		= cetregs_active,
+		.regset_get	= cetregs_get,
+		.set		= cetregs_set
+	},
 };
 
 static const struct user_regset_view user_x86_64_view = {
@@ -1336,6 +1347,15 @@ static struct user_regset x86_32_regsets[] __ro_after_init = {
 		.active		= ioperm_active,
 		.regset_get	= ioperm_get
 	},
+	[REGSET_CET32] = {
+		.core_note_type = NT_X86_CET,
+		.n		= sizeof(struct cet_user_state) / sizeof(u64),
+		.size		= sizeof(u64),
+		.align		= sizeof(u64),
+		.active		= cetregs_active,
+		.regset_get	= cetregs_get,
+		.set		= cetregs_set
+	},
 };
 
 static const struct user_regset_view user_x86_32_view = {
include/uapi/linux/elf.h +1 -0
index c7b056af9ef0..11089731e2e9 100644
@@ -406,6 +406,7 @@ typedef struct elf64_shdr {
 #define NT_386_TLS	0x200		/* i386 TLS slots (struct user_desc) */
 #define NT_386_IOPERM	0x201		/* x86 io permission bitmap (1=deny) */
 #define NT_X86_XSTATE	0x202		/* x86 extended state using xsave */
+#define NT_X86_CET	0x203		/* x86 CET state */
 #define NT_S390_HIGH_GPRS	0x300	/* s390 upper register halves */
 #define NT_S390_TIMER	0x301		/* s390 timer register */
 #define NT_S390_TODCMP	0x302		/* s390 TOD clock comparator register */
Signature · 1 line
2.17.1
maintainer
#71 lore raw

Re: [PATCH v3 35/37] x86/cet: Add PTRACE interface for CET

Quoted 20 lines · Rick Edgecombe

From: Yu-cheng Yu <[email protected]>

Some applications (like GDB and CRIU) would like to tweak CET state via ptrace. This allows for existing functionality to continue to work for seized CET applications. Provide an interface based on the xsave buffer format of CET, but filter unneeded states to make the kernel’s job easier.

There is already ptrace functionality for accessing xstate, but this does not include supervisor xfeatures. So there is not a completely clear place for where to put the CET state. Adding it to the user xfeatures regset would complicate that code, as it currently shares logic with signals which should not have supervisor features.

Don’t add a general supervisor xfeature regset like the user one, because it is better to maintain flexibility for other supervisor xfeatures to define their own interface. For example, an xfeature may decide not to expose all of it’s state to userspace. A lot of enum values remain to be used, so just put it in dedicated CET regset.

Quoted 6 lines

The only downside to not having a generic supervisor xfeature regset, is that apps need to be enlightened of any new supervisor xfeature exposed this way (i.e. they can’t try to have generic save/restore logic). But maybe that is a good thing, because they have to think through each new xfeature instead of encountering issues when new a new supervisor xfeature was added.

Per this argument this should not use the CET XSAVE format and CET name at all, because that conflates the situation vs IBT. Enabling that might not want to follow this precedent.

Quoted 11 lines

By adding a CET regset, it also has the effect of including the CET state in a core dump, which could be useful for debugging.

Inside the setter CET regset, filter out invalid state. Today this includes states disallowed by the HW and states involving Indirect Branch Tracking which the kernel does not currently support for usersapce.

So this leaves three pieces of data that can be set, shadow stack enablement, WRSS enablement and the shadow stack pointer. It is worth noting that this is separate than enabling shadow stack via the arch_prctl()s.

Does this validate the SSP, when set, points to an actual valid SS page?

#72 lore raw

Re: [PATCH v3 35/37] x86/cet: Add PTRACE interface for CET

+ Christina

Quoted 35 lines · Peter Zijlstra
Quoted 25 lines · Rick Edgecombe

From: Yu-cheng Yu <[email protected]>

Some applications (like GDB and CRIU) would like to tweak CET state via
ptrace. This allows for existing functionality to continue to work for
seized CET applications. Provide an interface based on the xsave buffer
format of CET, but filter unneeded states to make the kernel’s job easier.

There is already ptrace functionality for accessing xstate, but this
does not include supervisor xfeatures. So there is not a completely clear place for where to put the CET state. Adding it to the user xfeatures regset would complicate that code, as it currently shares logic with signals which should not have supervisor features.

Don’t add a general supervisor xfeature regset like the user one, because it is better to maintain flexibility for other supervisor xfeatures to define their own interface. For example, an xfeature may
decide not to expose all of it’s state to userspace. A lot of enum values remain to be used, so just put it in dedicated CET regset.

Quoted 8 lines

The only downside to not having a generic supervisor xfeature regset,
is that apps need to be enlightened of any new supervisor xfeature exposed this way (i.e. they can’t try to have generic save/restore logic). But maybe that is a good thing, because they have to think through each new xfeature instead of encountering issues when new a new
supervisor xfeature was added.

Quoted 5 lines

Per this argument this should not use the CET XSAVE format and CET name
at all, because that conflates the situation vs IBT. Enabling that might
not want to follow this precedent.

Hmm, we definitely need to be able to set the SSP. Christina, does GDB need anything else? I thought maybe toggling SHSTK_EN?

So it might end up looking pretty much the same, and it would just be renamed and separated in concept.

Quoted 10 lines
Quoted 10 lines

By adding a CET regset, it also has the effect of including the CET state
in a core dump, which could be useful for debugging.

Inside the setter CET regset, filter out invalid state. Today this includes states disallowed by the HW and states involving Indirect Branch
Tracking which the kernel does not currently support for usersapce.

Quoted 8 lines
Quoted 5 lines

So this leaves three pieces of data that can be set, shadow stack enablement, WRSS enablement and the shadow stack pointer. It is worth
noting that this is separate than enabling shadow stack via the arch_prctl()s.

Does this validate the SSP, when set, points to an actual valid SS page?

No, but that situation is already possible and has to be handled anyway. Just unmap your shadow stack, and map whatever other type of memory at the same address without doing a call or ret. Then you will segfault at the first call or ret.

#73 lore raw

RE: [PATCH v3 35/37] x86/cet: Add PTRACE interface for CET

Quoted 32 lines

+ Christina

Quoted 29 lines · Peter Zijlstra
Quoted 27 lines · Rick Edgecombe

From: Yu-cheng Yu <[email protected]>

Some applications (like GDB and CRIU) would like to tweak CET state via ptrace. This allows for existing functionality to continue to work for seized CET applications. Provide an interface based on the xsave buffer format of CET, but filter unneeded states to make the kernel’s job easier.

There is already ptrace functionality for accessing xstate, but this does not include supervisor xfeatures. So there is not a completely clear place for where to put the CET state. Adding it to the user xfeatures regset would complicate that code, as it currently shares logic with signals which should not have supervisor features.

Don’t add a general supervisor xfeature regset like the user one, because it is better to maintain flexibility for other supervisor xfeatures to define their own interface. For example, an xfeature may decide not to expose all of it’s state to userspace. A lot of enum values remain to be used, so just put it in dedicated CET regset.

The only downside to not having a generic supervisor xfeature regset, is that apps need to be enlightened of any new supervisor xfeature exposed this way (i.e. they can’t try to have generic save/restore logic). But maybe that is a good thing, because they have to think through each new xfeature instead of encountering issues when new a new supervisor xfeature was added.

Quoted 6 lines
Quoted 3 lines

Per this argument this should not use the CET XSAVE format and CET name at all, because that conflates the situation vs IBT. Enabling that might not want to follow this precedent.

Hmm, we definitely need to be able to set the SSP. Christina, does GDB need anything else? I thought maybe toggling SHSTK_EN?

In addition to the SSP, we want to write the CET state. For instance for inferior calls, we want to reset the IBT bits.
However, we won't write states that are disallowed by HW.
Intel Deutschland GmbH
Registered Address: Am Campeon 10, 85579 Neubiberg, Germany
Tel: +49 89 99 8853-0, www.intel.de <http://www.intel.de>
Managing Directors: Christin Eisenschmid, Sharon Heck, Tiffany Doon Silva Chairperson of the Supervisory Board: Nicole Lau
Registered Office: Munich
Commercial Register: Amtsgericht Muenchen HRB 186928

maintainer
#74 lore raw

Re: [PATCH v3 35/37] x86/cet: Add PTRACE interface for CET

Quoted 36 lines · Christina
Quoted 36 lines

+ Christina

Quoted 32 lines · Peter Zijlstra
Quoted 21 lines · Rick Edgecombe

From: Yu-cheng Yu <[email protected]>

Some applications (like GDB and CRIU) would like to tweak CET state via ptrace. This allows for existing functionality to continue to work for seized CET applications. Provide an interface based on the xsave buffer format of CET, but filter unneeded states to make the kernel’s job easier.

There is already ptrace functionality for accessing xstate, but this does not include supervisor xfeatures. So there is not a completely clear place for where to put the CET state. Adding it to the user xfeatures regset would complicate that code, as it currently shares logic with signals which should not have supervisor features.

Don’t add a general supervisor xfeature regset like the user one, because it is better to maintain flexibility for other supervisor xfeatures to define their own interface. For example, an xfeature may decide not to expose all of it’s state to userspace. A lot of enum values remain to be used, so just put it in dedicated CET regset.

Quoted 6 lines

The only downside to not having a generic supervisor xfeature regset, is that apps need to be enlightened of any new supervisor xfeature exposed this way (i.e. they can’t try to have generic save/restore logic). But maybe that is a good thing, because they have to think through each new xfeature instead of encountering issues when new a new supervisor xfeature was added.

Per this argument this should not use the CET XSAVE format and CET name at all, because that conflates the situation vs IBT. Enabling that might not want to follow this precedent.

Quoted 5 lines
Quoted 2 lines

Hmm, we definitely need to be able to set the SSP. Christina, does GDB need anything else? I thought maybe toggling SHSTK_EN?

In addition to the SSP, we want to write the CET state. For instance for inferior calls, we want to reset the IBT bits.

This is about Shadow Stack -- IBT is a completely different feature and not subject of this series.

Also, wth is an inferior call?

#75 lore raw

Re: [PATCH v3 35/37] x86/cet: Add PTRACE interface for CET

Quoted 1 line · Peter Zijlstra

Also, wth is an inferior call?

I think it's the GDB functionality to make a call in the process being debugged. So if you want to call something without an endbranch I guess.

#76 lore raw

RE: [PATCH v3 35/37] x86/cet: Add PTRACE interface for CET

Quoted 5 lines · Peter Zijlstra
Quoted 1 line

Also, wth is an inferior call?

I think it's the GDB functionality to make a call in the process being debugged. So if you want to call something without an endbranch I guess.

For inferior calls, GDB builds a dummy-frame to evaluate an expression:
https://sourceware.org/gdb/onlinedocs/gdb/Calling.html

Best Regards,
Christina

Intel Deutschland GmbH
Registered Address: Am Campeon 10, 85579 Neubiberg, Germany
Tel: +49 89 99 8853-0, www.intel.de <http://www.intel.de>
Managing Directors: Christin Eisenschmid, Sharon Heck, Tiffany Doon Silva Chairperson of the Supervisory Board: Nicole Lau
Registered Office: Munich
Commercial Register: Amtsgericht Muenchen HRB 186928

#77 lore raw

Re: [PATCH v3 35/37] x86/cet: Add PTRACE interface for CET

In reply to Schimpe, Christina
Quoted 8 lines · Christina
Quoted 3 lines

Hmm, we definitely need to be able to set the SSP. Christina, does GDB need
anything else? I thought maybe toggling SHSTK_EN?

In addition to the SSP, we want to write the CET state. For instance for inferior calls,
we want to reset the IBT bits.
However, we won't write states that are disallowed by HW.

Sorry, I should have given more background. Peter is saying we should split the ptrace interface so that shadow stack and IBT are separate. They would also no longer necessarily mirror the CET_U MSR format. Instead the kernel would expose a kernel specific format that has the needed bits of shadow stack support. And a separate one later for IBT.

So the question is what does shadow stack need to support for ptrace besides SSP? Is it only SSP? The other features are SHSTK_EN and WRSS_EN. It might actually be nice to keep how these bits get flipped more controlled (remove them from ptrace). It looks like CRIU didn't need them.

#78 lore raw

RE: [PATCH v3 35/37] x86/cet: Add PTRACE interface for CET

Quoted 14 lines · Christina
Quoted 6 lines
Quoted 2 lines

Hmm, we definitely need to be able to set the SSP. Christina, does GDB need anything else? I thought maybe toggling SHSTK_EN?

In addition to the SSP, we want to write the CET state. For instance for inferior calls, we want to reset the IBT bits. However, we won't write states that are disallowed by HW.

Sorry, I should have given more background. Peter is saying we should split the ptrace interface so that shadow stack and IBT are separate. They would also no longer necessarily mirror the CET_U MSR format. Instead the kernel would expose a kernel specific format that has the needed bits of shadow stack support. And a separate one later for IBT.

Quoted 5 lines

So the question is what does shadow stack need to support for ptrace besides SSP? Is it only SSP? The other features are SHSTK_EN and WRSS_EN. It might actually be nice to keep how these bits get flipped more controlled (remove them from ptrace). It looks like CRIU didn't need them.

GDB currently reads the CET_U and SSP register. However, we don’t necessarily have to read EB_LEG_BITMAP_BASE. In addition to SSP, we want to write the bits for the IBT state machine (TRACKER and SUPPRESS). However, besides that GDB does not have to write anything else.

Intel Deutschland GmbH
Registered Address: Am Campeon 10, 85579 Neubiberg, Germany
Tel: +49 89 99 8853-0, www.intel.de <http://www.intel.de>
Managing Directors: Christin Eisenschmid, Sharon Heck, Tiffany Doon Silva Chairperson of the Supervisory Board: Nicole Lau
Registered Office: Munich
Commercial Register: Amtsgericht Muenchen HRB 186928

#79 lore raw

Re: [PATCH v3 35/37] x86/cet: Add PTRACE interface for CET

Quoted 28 lines · Christina
Quoted 19 lines · Christina
Quoted 8 lines
Quoted 3 lines

Hmm, we definitely need to be able to set the SSP. Christina, does
GDB need anything else? I thought maybe toggling SHSTK_EN?

In addition to the SSP, we want to write the CET state. For instance
for inferior calls, we want to reset the IBT bits. However, we won't write states that are disallowed by HW.

Sorry, I should have given more background. Peter is saying we should split
the ptrace interface so that shadow stack and IBT are separate. They would also no longer necessarily mirror the CET_U MSR format. Instead the kernel would expose a kernel specific format that has the
needed bits of shadow stack support. And a separate one later for IBT.

Quoted 8 lines

So the question is what does shadow stack need to support for ptrace
besides SSP? Is it only SSP? The other features are SHSTK_EN and WRSS_EN.
It might actually be nice to keep how these bits get flipped more controlled
(remove them from ptrace). It looks like CRIU didn't need them.

Quoted 5 lines

GDB currently reads the CET_U and SSP register. However, we don’t necessarily have to read EB_LEG_BITMAP_BASE.
In addition to SSP, we want to write the bits for the IBT state machine (TRACKER and SUPPRESS).
However, besides that GDB does not have to write anything else.

Again, this is just about shadow stack. IBT will have a separate interface. So based on these comments, I'll change the interface in this patch to one for simply reading/writing SSP.

maintainer
#80 lore raw

Re: [PATCH v3 35/37] x86/cet: Add PTRACE interface for CET

In reply to Edgecombe, Rick P
Quoted 16 lines · Rick P
Quoted 8 lines · Christina
Quoted 3 lines

Hmm, we definitely need to be able to set the SSP. Christina, does GDB need
anything else? I thought maybe toggling SHSTK_EN?

In addition to the SSP, we want to write the CET state. For instance for inferior calls,
we want to reset the IBT bits.
However, we won't write states that are disallowed by HW.

Sorry, I should have given more background. Peter is saying we should split the ptrace interface so that shadow stack and IBT are separate. They would also no longer necessarily mirror the CET_U MSR format. Instead the kernel would expose a kernel specific format that has the needed bits of shadow stack support. And a separate one later for IBT.

Quoted 5 lines

So the question is what does shadow stack need to support for ptrace besides SSP? Is it only SSP? The other features are SHSTK_EN and WRSS_EN. It might actually be nice to keep how these bits get flipped more controlled (remove them from ptrace). It looks like CRIU didn't need them.

CRIU reads CET_U with ptrace(PTRACE_GETREGSET, NT_X86_CET). It's done before the injection of the parasite. The value of SHSTK_EN is used then to detect if shadow stack is enabled and to setup victim's shadow stack for sigreturn.

Signature · 2 lines
Sincerely yours,
Mike.
#81 lore raw

Re: [PATCH v3 35/37] x86/cet: Add PTRACE interface for CET

Quoted 33 lines · Mike Rapoport
Quoted 22 lines · Rick P
Quoted 10 lines · Christina
Quoted 4 lines

Hmm, we definitely need to be able to set the SSP. Christina, does
GDB need
anything else? I thought maybe toggling SHSTK_EN?

In addition to the SSP, we want to write the CET state. For instance
for inferior calls,
we want to reset the IBT bits.
However, we won't write states that are disallowed by HW.

Sorry, I should have given more background. Peter is saying we should
split the ptrace interface so that shadow stack and IBT are separate.
They would also no longer necessarily mirror the CET_U MSR format. Instead the kernel would expose a kernel specific format that has the
needed bits of shadow stack support. And a separate one later for IBT.

Quoted 8 lines

So the question is what does shadow stack need to support for ptrace
besides SSP? Is it only SSP? The other features are SHSTK_EN and WRSS_EN. It might actually be nice to keep how these bits get flipped
more controlled (remove them from ptrace). It looks like CRIU didn't
need them.

Quoted 6 lines

CRIU reads CET_U with ptrace(PTRACE_GETREGSET, NT_X86_CET). It's done before the injection of the parasite. The value of SHSTK_EN is used then to
detect if shadow stack is enabled and to setup victim's shadow stack for
sigreturn.

Hmm, can it read /proc/pid/status? It has some lines like this:
x86_Thread_features: shstk wrss x86_Thread_features_locked: shstk wrss

maintainer
#82 lore raw

Re: [PATCH v3 35/37] x86/cet: Add PTRACE interface for CET

Quoted 41 lines · Rick P
Quoted 33 lines · Mike Rapoport
Quoted 22 lines · Rick P
Quoted 10 lines · Christina
Quoted 4 lines

Hmm, we definitely need to be able to set the SSP. Christina, does
GDB need
anything else? I thought maybe toggling SHSTK_EN?

In addition to the SSP, we want to write the CET state. For instance
for inferior calls,
we want to reset the IBT bits.
However, we won't write states that are disallowed by HW.

Sorry, I should have given more background. Peter is saying we should
split the ptrace interface so that shadow stack and IBT are separate.
They would also no longer necessarily mirror the CET_U MSR format. Instead the kernel would expose a kernel specific format that has the
needed bits of shadow stack support. And a separate one later for IBT.

Quoted 8 lines

So the question is what does shadow stack need to support for ptrace
besides SSP? Is it only SSP? The other features are SHSTK_EN and WRSS_EN. It might actually be nice to keep how these bits get flipped
more controlled (remove them from ptrace). It looks like CRIU didn't
need them.

Quoted 6 lines

CRIU reads CET_U with ptrace(PTRACE_GETREGSET, NT_X86_CET). It's done before the injection of the parasite. The value of SHSTK_EN is used then to
detect if shadow stack is enabled and to setup victim's shadow stack for
sigreturn.

Quoted 3 lines

Hmm, can it read /proc/pid/status? It has some lines like this:
x86_Thread_features: shstk wrss x86_Thread_features_locked: shstk wrss

It could, but that would be much more intrusive than GETREGSET because currently /proc parsing and parasite injection don't really interact. If anything, arch_prctl(ARCH_CET_GET) via ptrace would be much nicer than /proc.

Signature · 2 lines
Sincerely yours,
Mike.
#83 lore raw

PATCH v3 36/37 x86/cet/shstk: Add ARCH_CET_UNLOCK

In reply to Rick Edgecombe

From: Mike Rapoport <[email protected]>

Userspace loaders may lock features before a CRIU restore operation has the chance to set them to whatever state is required by the process being restored. Allow a way for CRIU to unlock features. Add it as an arch_prctl() like the other CET operations, but restrict it being called by the ptrace arch_pctl() interface.

[Merged into recent API changes, added commit log and docs]

---

v3:
- Depend on CONFIG_CHECKPOINT_RESTORE (Kees)

 Documentation/x86/cet.rst         | 4 ++++
 arch/x86/include/uapi/asm/prctl.h | 1 +
 arch/x86/kernel/process_64.c      | 1 +
 arch/x86/kernel/shstk.c           | 9 +++++++--
 4 files changed, 13 insertions(+), 2 deletions(-)
Documentation/x86/cet.rst +4 -0
index b56811566531..f69cafb1feff 100644
@@ -66,6 +66,10 @@ arch_prctl(ARCH_CET_LOCK, unsigned int features)
     are ignored. The mask is ORed with the existing value. So any feature bits
     set here cannot be enabled or disabled afterwards.
 
+arch_prctl(ARCH_CET_UNLOCK, unsigned int features)
+    Unlock features. 'features' is a mask of all features to unlock. All
+    bits set are processed, unset bits are ignored.
+
 The return values are as following:
     On success, return 0. On error, errno can be::
 
arch/x86/include/uapi/asm/prctl.h +1 -0
index 5f1d3181e4a1..0c37fd0ad8d9 100644
@@ -25,6 +25,7 @@
 #define ARCH_CET_ENABLE			0x5001
 #define ARCH_CET_DISABLE		0x5002
 #define ARCH_CET_LOCK			0x5003
+#define ARCH_CET_UNLOCK			0x5004
 
 /* ARCH_CET_ features bits */
 #define CET_SHSTK			(1ULL <<  0)
arch/x86/kernel/process_64.c +1 -0
index 17fec059317c..03bc16c9cc19 100644
@@ -835,6 +835,7 @@ long do_arch_prctl_64(struct task_struct *task, int option, unsigned long arg2)
 	case ARCH_CET_ENABLE:
 	case ARCH_CET_DISABLE:
 	case ARCH_CET_LOCK:
+	case ARCH_CET_UNLOCK:
 		return cet_prctl(task, option, arg2);
 	default:
 		ret = -EINVAL;
arch/x86/kernel/shstk.c +7 -2
index 71620b77a654..bed7032d35f2 100644
@@ -450,9 +450,14 @@ long cet_prctl(struct task_struct *task, int option, unsigned long features)
 		return 0;
 	}
 
-	/* Don't allow via ptrace */
-	if (task != current)
+	/* Only allow via ptrace */
+	if (task != current) {
+		if (option == ARCH_CET_UNLOCK && IS_ENABLED(CONFIG_CHECKPOINT_RESTORE)) {
+			task->thread.features_locked &= ~features;
+			return 0;
+		}
 		return -EINVAL;
+	}
 
 	/* Do not allow to change locked features */
 	if (features & task->thread.features_locked)
Signature · 1 line
2.17.1
maintainer
#84 lore raw

Re: [PATCH v3 36/37] x86/cet/shstk: Add ARCH_CET_UNLOCK

arch/x86/kernel/shstk.c long cet_prctl(struct task_struct *task, int option, unsigned long features) · line 453

Quoted 11 lines · Rick Edgecombe
arch/x86/kernel/shstk.c +1 -2
index 71620b77a654..bed7032d35f2 100644
@@ -450,9 +450,14 @@ long cet_prctl(struct task_struct *task, int option, unsigned long features)
 		return 0;
 	}
 
-	/* Don't allow via ptrace */
-	if (task != current)
+	/* Only allow via ptrace */

Both the old and new comment are equally useless for they tell us nothing the code doesn't already.

Why isn't ptrace allowed to call these, and doesn't that rather leave CRIU in a bind, it can unlock but not re-lock the features, leaving restored processes more vulnerable than they were.

arch/x86/kernel/shstk.c long cet_prctl(struct task_struct *task, int option, unsigned long features) · line 455

Quoted 2 lines
arch/x86/kernel/shstk.c +2 -0
+	if (task != current) {
+		if (option == ARCH_CET_UNLOCK && IS_ENABLED(CONFIG_CHECKPOINT_RESTORE)) {

Why make this conditional on CRIU at all?

Quoted 11 lines
arch/x86/kernel/shstk.c +4 -0
+			task->thread.features_locked &= ~features;
+			return 0;
+		}
 		return -EINVAL;
+	}
 
 	/* Do not allow to change locked features */
 	if (features & task->thread.features_locked)
Signature · 1 line
2.17.1
#85 lore raw

Re: [PATCH v3 36/37] x86/cet/shstk: Add ARCH_CET_UNLOCK

Quoted 18 lines · Peter Zijlstra

arch/x86/kernel/shstk.c long cet_prctl(struct task_struct *task, int · line 454

Quoted 12 lines · Rick Edgecombe
arch/x86/kernel/shstk.c +1 -2
index 71620b77a654..bed7032d35f2 100644
@@ -450,9 +450,14 @@ long cet_prctl(struct task_struct *task, int
 option, unsigned long features)
 		return 0;
 	}
 
-	/* Don't allow via ptrace */
-	if (task != current)
+	/* Only allow via ptrace */

Both the old and new comment are equally useless for they tell us nothing the code doesn't already.

Quoted 3 lines

Why isn't ptrace allowed to call these, and doesn't that rather leave CRIU in a bind, it can unlock but not re-lock the features, leaving restored processes more vulnerable than they were.

As I understand it, CRIU does some poking at things via ptrace to setup a "parasite" which is actual executable code injected in the process. Then a lot of the restore code actually runs in the process getting restored.

As for not allowing unlock to be used in the non-ptrace scenario it's to keep attackers from unlocking the shadow stack disable API and calling it to disable shadow stack.

As for not allowing the others via ptrace, the call is in the tracing processes context, so they would operate on their own registers instead of the tracees.

Quoted 6 lines

arch/x86/kernel/shstk.c long cet_prctl(struct task_struct *task, int · line 457

Quoted 4 lines
arch/x86/kernel/shstk.c +2 -0
+	if (task != current) {
+		if (option == ARCH_CET_UNLOCK &&
 IS_ENABLED(CONFIG_CHECKPOINT_RESTORE)) {

Why make this conditional on CRIU at all?

Kees asked for it, I think he was worried about attackers using it to unlock and disable shadow stack. So wanted to lock it down to the maximum.

Quoted 12 lines
Quoted 12 lines
arch/x86/kernel/shstk.c +4 -0
+			task->thread.features_locked &= ~features;
+			return 0;
+		}
 		return -EINVAL;
+	}
 
arch/x86/kernel/shstk.c +0 -0
 	/* Do not allow to change locked features */
 	if (features & task->thread.features_locked)
Signature · 1 line
2.17.1
maintainer
#86 lore raw

Re: [PATCH v3 36/37] x86/cet/shstk: Add ARCH_CET_UNLOCK

Quoted 9 lines · Rick P
Quoted 5 lines
Quoted 3 lines
(quoted diff) +2 -0
+	if (task != current) {
+		if (option == ARCH_CET_UNLOCK &&

IS_ENABLED(CONFIG_CHECKPOINT_RESTORE)) {

Why make this conditional on CRIU at all?

Kees asked for it, I think he was worried about attackers using it to unlock and disable shadow stack. So wanted to lock it down to the maximum.

Well, distros will all have this stuff enabled no? So not much protection in practise.

#87 lore raw

Re: [PATCH v3 36/37] x86/cet/shstk: Add ARCH_CET_UNLOCK

Quoted 10 lines · Peter Zijlstra
Quoted 7 lines · Rick P
Quoted 4 lines
Quoted 3 lines
(quoted diff) +2 -0
+	if (task != current) {
+		if (option == ARCH_CET_UNLOCK &&

IS_ENABLED(CONFIG_CHECKPOINT_RESTORE)) {

Why make this conditional on CRIU at all?

Kees asked for it, I think he was worried about attackers using it to unlock and disable shadow stack. So wanted to lock it down to the maximum.

Well, distros will all have this stuff enabled no? So not much protection in practise.

Yeah, that's true for the distros.

But, I would imagine that our more paranoid friends like the ChromeOS folks might appreciate this.

maintainer
#88 lore raw

Re: [PATCH v3 36/37] x86/cet/shstk: Add ARCH_CET_UNLOCK

Quoted 9 lines · Dave Hansen
Quoted 8 lines · Peter Zijlstra
Quoted 7 lines · Rick P
Quoted 4 lines
Quoted 3 lines
(quoted diff) +2 -0
+	if (task != current) {
+		if (option == ARCH_CET_UNLOCK &&

IS_ENABLED(CONFIG_CHECKPOINT_RESTORE)) {

Why make this conditional on CRIU at all?

Kees asked for it, I think he was worried about attackers using it to unlock and disable shadow stack. So wanted to lock it down to the maximum.

Quoted 7 lines
Quoted 2 lines

Well, distros will all have this stuff enabled no? So not much protection in practise.

Yeah, that's true for the distros.

But, I would imagine that our more paranoid friends like the ChromeOS folks might appreciate this.

ptrace can modify text, I'm not sure what if anything we're protecting against.

#89 lore raw

RFC v3 37/37 fs/binfmt_elf: Block old shstk elf bit

In reply to Rick Edgecombe

The x86 Control-flow Enforcement Technology (CET) feature includes a new feature called shadow stacks that provides security enforcement of behavior that is rarely used by non-attackers.

There exists a lurking compatibility problem for userspace shadow stack. Old binaries exist that are marked as supporting shadow stack in their elf header, but actually will crash if shadow stack is enabled. This would only happens if the loader chooses to call the kernel APIs that enable shadow stack. However, glibc plans to update to do just this. At which point the old apps will crash.

In a lot of ways this is userspace's business, however the kernel could save the user from these crashes. It could do this by detecting the elf bit and blocking the shadow stack APIs, so that loader (glibc) will fail to enable shadow stack and the binary would then run without shadow stack. So implement this logic in the elf processing that happens during exec.

This is a bit dirty, and implemented here just for discussion on whether the kernel should actually do something like this.

The elf loading logic in the kernel has to do a little extra scanning through the elf header in order to find the shadow stack bit.

Since some people may not mind if some apps crash, also create a Kconfig X86_USER_SHADOW_STACK_ALLOW_BROKEN to allow the old binaries to still have access to the shadow stack kernel APIs.

This is based on an earlier patch by Yu-cheng Yu that was looking at elf bits on the interpreter instead of the execing binary.

---
 arch/arm64/include/asm/elf.h     |  5 +++++
 arch/x86/Kconfig                 | 13 +++++++++++++
 arch/x86/include/asm/cet.h       |  2 ++
 arch/x86/include/asm/elf.h       | 11 +++++++++++
 arch/x86/include/asm/processor.h |  1 +
 arch/x86/kernel/process_64.c     | 33 ++++++++++++++++++++++++++++++++
 arch/x86/kernel/shstk.c          | 15 +++++++++++++++
 fs/binfmt_elf.c                  | 24 ++++++++++++++++++++++-
 include/linux/elf.h              |  6 ++++++
 include/uapi/linux/elf.h         | 15 +++++++++++++++
 10 files changed, 124 insertions(+), 1 deletion(-)
arch/arm64/include/asm/elf.h +5 -0
index 97932fbf973d..1aa76ed02dda 100644
@@ -279,6 +279,11 @@ static inline int arch_parse_elf_property(u32 type, const void *data,
 	return 0;
 }
 
+static inline int arch_process_elf_property(struct arch_elf_state *arch)
+{
+	return 0;
+}
+
 static inline int arch_elf_pt_proc(void *ehdr, void *phdr,
 				   struct file *f, bool is_interp,
 				   struct arch_elf_state *state)
arch/x86/Kconfig +13 -0
index f3d14f5accce..da9e43aa91a3 100644
@@ -28,6 +28,7 @@ config X86_64
 	select ARCH_HAS_GIGANTIC_PAGE
 	select ARCH_SUPPORTS_INT128 if CC_HAS_INT128
 	select ARCH_USE_CMPXCHG_LOCKREF
+	select ARCH_USE_GNU_PROPERTY
 	select HAVE_ARCH_SOFT_DIRTY
 	select MODULES_USE_ELF_RELA
 	select NEED_DMA_MAP_STATE
@@ -60,6 +61,7 @@ config X86
 	select ACPI_LEGACY_TABLES_LOOKUP	if ACPI
 	select ACPI_SYSTEM_POWER_STATES_SUPPORT	if ACPI
 	select ARCH_32BIT_OFF_T			if X86_32
+	select ARCH_BINFMT_ELF_STATE
 	select ARCH_CLOCKSOURCE_INIT
 	select ARCH_CORRECT_STACKTRACE_ON_KRETPROBE
 	select ARCH_ENABLE_HUGEPAGE_MIGRATION if X86_64 && HUGETLB_PAGE && MIGRATION
@@ -1977,6 +1979,17 @@ config X86_USER_SHADOW_STACK
 
 	  If unsure, say N.
 
+config X86_USER_SHADOW_STACK_ALLOW_BROKEN
+	bool "Allow enabling shadow stack for broken binaries"
+	depends on EXPERT
+	depends on X86_USER_SHADOW_STACK
+	help
+	  There exist old binaries that are marked as compatible with shadow
+	  stack, but actually aren't. The kernel blocks these binaries from
+	  getting shadow stack enabled by default. But some working binaries
+	  are also blocked. Select this option if you would like to allow these
+	  binaries to run with shadow stack, and possibly crash.
+
 config EFI
 	bool "EFI runtime service support"
 	depends on ACPI
arch/x86/include/asm/cet.h +2 -0
index 098e4ecfdf9b..7f0cabb3db21 100644
@@ -22,6 +22,7 @@ int shstk_alloc_thread_stack(struct task_struct *p, unsigned long clone_flags,
 void shstk_free(struct task_struct *p);
 int setup_signal_shadow_stack(struct ksignal *ksig);
 int restore_signal_shadow_stack(void);
+void bad_cet_binary_disable(bool disable);
 #else
 static inline long cet_prctl(struct task_struct *task, int option,
 			     unsigned long features) { return -EINVAL; }
@@ -33,6 +34,7 @@ static inline int shstk_alloc_thread_stack(struct task_struct *p,
 static inline void shstk_free(struct task_struct *p) {}
 static inline int setup_signal_shadow_stack(struct ksignal *ksig) { return 0; }
 static inline int restore_signal_shadow_stack(void) { return 0; }
+static inline void bad_cet_binary_disable(bool disable) {};
 #endif /* CONFIG_X86_USER_SHADOW_STACK */
 
 #endif /* __ASSEMBLY__ */
arch/x86/include/asm/elf.h +11 -0
index cb0ff1055ab1..95ee133acffb 100644
@@ -383,6 +383,17 @@ extern int compat_arch_setup_additional_pages(struct linux_binprm *bprm,
 
 extern bool arch_syscall_is_vdso_sigreturn(struct pt_regs *regs);
 
+struct arch_elf_state {
+	unsigned int gnu_property;
+};
+
+#define INIT_ARCH_ELF_STATE {	\
+	.gnu_property = 0,	\
+}
+
+#define arch_elf_pt_proc(ehdr, phdr, elf, interp, state) (0)
+#define arch_check_elf(ehdr, interp, interp_ehdr, state) (0)
+
 /* Do not change the values. See get_align_mask() */
 enum align_flags {
 	ALIGN_VA_32	= BIT(0),
arch/x86/include/asm/processor.h +1 -0
index a6c414dfd10f..4b333c801010 100644
@@ -534,6 +534,7 @@ struct thread_struct {
 #ifdef CONFIG_X86_USER_SHADOW_STACK
 	unsigned long		features;
 	unsigned long		features_locked;
+	bool			bad_cet_binary_disable;
 
 	struct thread_shstk	shstk;
 #endif
arch/x86/kernel/process_64.c +33 -0
index 03bc16c9cc19..461b8e9468df 100644
@@ -867,3 +867,36 @@ unsigned long KSTK_ESP(struct task_struct *task)
 {
 	return task_pt_regs(task)->sp;
 }
+
+#ifdef CONFIG_X86_USER_SHADOW_STACK
+int arch_parse_elf_property(u32 type, const void *data, size_t datasz,
+			    bool compat, struct arch_elf_state *state)
+{
+	if (type != GNU_PROPERTY_X86_FEATURE_1_AND)
+		return 0;
+
+	if (datasz != sizeof(unsigned int))
+		return -ENOEXEC;
+
+	state->gnu_property = *(unsigned int *)data;
+	return 0;
+}
+
+int arch_process_elf_property(struct arch_elf_state *state)
+{
+	bad_cet_binary_disable(state->gnu_property & GNU_PROPERTY_X86_FEATURE_1_BAD);
+	return 0;
+}
+#else /* CONFIG_X86_USER_SHADOW_STACK */
+int arch_parse_elf_property(u32 type, const void *data, size_t datasz,
+			    bool compat, struct arch_elf_state *state)
+{
+	return 0;
+}
+
+int arch_process_elf_property(struct arch_elf_state *state)
+{
+	return 0;
+}
+#endif /* CONFIG_X86_USER_SHADOW_STACK */
+
arch/x86/kernel/shstk.c +15 -0
index bed7032d35f2..cb105e69c840 100644
@@ -445,6 +445,9 @@ SYSCALL_DEFINE3(map_shadow_stack, unsigned long, addr, unsigned long, size, unsi
 
 long cet_prctl(struct task_struct *task, int option, unsigned long features)
 {
+	if (task->thread.bad_cet_binary_disable)
+		return -EINVAL;
+
 	if (option == ARCH_CET_LOCK) {
 		task->thread.features_locked |= features;
 		return 0;
@@ -482,3 +485,15 @@ long cet_prctl(struct task_struct *task, int option, unsigned long features)
 		return wrss_control(true);
 	return -EINVAL;
 }
+
+#ifdef CONFIG_X86_USER_SHADOW_STACK_ALLOW_BROKEN
+void bad_cet_binary_disable(bool disable)
+{
+	current->thread.bad_cet_binary_disable = false;
+}
+#else /* CONFIG_X86_USER_SHADOW_STACK_ALLOW_BROKEN */
+void bad_cet_binary_disable(bool disable)
+{
+	current->thread.bad_cet_binary_disable = disable;
+}
+#endif /* CONFIG_X86_USER_SHADOW_STACK_ALLOW_BROKEN */
fs/binfmt_elf.c +23 -1
index 6a11025e5850..8b6ae5e423fb 100644
@@ -764,6 +764,8 @@ static int parse_elf_property(const char *data, size_t *off, size_t datasz,
 #define GNU_PROPERTY_TYPE_0_NAME "GNU"
 #define NOTE_NAME_SZ (sizeof(GNU_PROPERTY_TYPE_0_NAME))
 
+
+
 static int parse_elf_properties(struct file *f, const struct elf_phdr *phdr,
 				struct arch_elf_state *arch)
 {
@@ -821,6 +823,18 @@ static int parse_elf_properties(struct file *f, const struct elf_phdr *phdr,
 	return ret == -ENOENT ? 0 : ret;
 }
 
+static int check_elf_properties(struct file *f, const struct elf_phdr *phdr)
+{
+	struct arch_elf_state arch_state = INIT_ARCH_ELF_STATE;
+	int retval;
+
+	retval = parse_elf_properties(f, phdr, &arch_state);
+	if (retval)
+		return retval;
+
+	return arch_process_elf_property(&arch_state);
+}
+
 static int load_elf_binary(struct linux_binprm *bprm)
 {
 	struct file *interpreter = NULL; /* to shut gcc up */
@@ -920,13 +934,21 @@ static int load_elf_binary(struct linux_binprm *bprm)
 		if (retval < 0)
 			goto out_free_dentry;
 
-		break;
+		/* Quit if already found PT_GNU_PROPERTY */
+		if (elf_property_phdata)
+			break;
+
+		continue;
 
 out_free_interp:
 		kfree(elf_interpreter);
 		goto out_free_ph;
 	}
 
+	retval = check_elf_properties(bprm->file, elf_property_phdata);
+	if (retval)
+		return retval;
+
 	elf_ppnt = elf_phdata;
 	for (i = 0; i < elf_ex->e_phnum; i++, elf_ppnt++)
 		switch (elf_ppnt->p_type) {
include/linux/elf.h +6 -0
index c9a46c4e183b..faf961b92a95 100644
@@ -92,9 +92,15 @@ static inline int arch_parse_elf_property(u32 type, const void *data,
 {
 	return 0;
 }
+
+static inline int arch_process_elf_property(struct arch_elf_state *arch)
+{
+	return 0;
+}
 #else
 extern int arch_parse_elf_property(u32 type, const void *data, size_t datasz,
 				   bool compat, struct arch_elf_state *arch);
+extern int arch_process_elf_property(struct arch_elf_state *arch);
 #endif
 
 #ifdef CONFIG_ARCH_HAVE_ELF_PROT
include/uapi/linux/elf.h +15 -0
index 11089731e2e9..d9b58adce321 100644
@@ -469,4 +469,19 @@ typedef struct elf64_note {
 /* Bits for GNU_PROPERTY_AARCH64_FEATURE_1_BTI */
 #define GNU_PROPERTY_AARCH64_FEATURE_1_BTI	(1U << 0)
 
+/*
+ * See the x86 64 psABI at:
+ * https://gitlab.com/x86-psABIs/x86-64-ABI/-/wikis/x86-64-psABI
+ * .note.gnu.property types for x86:
+ */
+/* 0xc0000000 and 0xc0000001 are reserved */
+#define GNU_PROPERTY_X86_FEATURE_1_AND		0xc0000002
+
+/* Bits for GNU_PROPERTY_X86_FEATURE_1_AND */
+#define GNU_PROPERTY_X86_FEATURE_1_IBT		0x00000001
+#define GNU_PROPERTY_X86_FEATURE_1_SHSTK	0x00000002
+
+#define GNU_PROPERTY_X86_FEATURE_1_BAD (GNU_PROPERTY_X86_FEATURE_1_IBT | \
+                                        GNU_PROPERTY_X86_FEATURE_1_SHSTK)
+
 #endif /* _UAPI_LINUX_ELF_H */
Signature · 1 line
2.17.1
#90 lore raw

Re: [RFC 37/37] fs/binfmt_elf: Block old shstk elf bit

Quoted 325 lines · Rick Edgecombe

The x86 Control-flow Enforcement Technology (CET) feature includes a new feature called shadow stacks that provides security enforcement of behavior that is rarely used by non-attackers.

There exists a lurking compatibility problem for userspace shadow stack. Old binaries exist that are marked as supporting shadow stack in their elf header, but actually will crash if shadow stack is enabled. This would only happens if the loader chooses to call the kernel APIs that enable shadow stack. However, glibc plans to update to do just this. At which point the old apps will crash.

In a lot of ways this is userspace's business, however the kernel could save the user from these crashes. It could do this by detecting the elf bit and blocking the shadow stack APIs, so that loader (glibc) will fail to enable shadow stack and the binary would then run without shadow stack. So implement this logic in the elf processing that happens during exec.

This is a bit dirty, and implemented here just for discussion on whether the kernel should actually do something like this.

The elf loading logic in the kernel has to do a little extra scanning through the elf header in order to find the shadow stack bit.

Since some people may not mind if some apps crash, also create a Kconfig X86_USER_SHADOW_STACK_ALLOW_BROKEN to allow the old binaries to still have access to the shadow stack kernel APIs.

This is based on an earlier patch by Yu-cheng Yu that was looking at elf bits on the interpreter instead of the execing binary.

---
 arch/arm64/include/asm/elf.h     |  5 +++++
 arch/x86/Kconfig                 | 13 +++++++++++++
 arch/x86/include/asm/cet.h       |  2 ++
 arch/x86/include/asm/elf.h       | 11 +++++++++++
 arch/x86/include/asm/processor.h |  1 +
 arch/x86/kernel/process_64.c     | 33 ++++++++++++++++++++++++++++++++
 arch/x86/kernel/shstk.c          | 15 +++++++++++++++
 fs/binfmt_elf.c                  | 24 ++++++++++++++++++++++-
 include/linux/elf.h              |  6 ++++++
 include/uapi/linux/elf.h         | 15 +++++++++++++++
 10 files changed, 124 insertions(+), 1 deletion(-)
arch/arm64/include/asm/elf.h +5 -0
index 97932fbf973d..1aa76ed02dda 100644
@@ -279,6 +279,11 @@ static inline int arch_parse_elf_property(u32 type, const void *data,
        return 0;
 }
 
+static inline int arch_process_elf_property(struct arch_elf_state *arch)
+{
+       return 0;
+}
+
 static inline int arch_elf_pt_proc(void *ehdr, void *phdr,
                                   struct file *f, bool is_interp,
                                   struct arch_elf_state *state)
arch/x86/Kconfig +13 -0
index f3d14f5accce..da9e43aa91a3 100644
@@ -28,6 +28,7 @@ config X86_64
        select ARCH_HAS_GIGANTIC_PAGE
        select ARCH_SUPPORTS_INT128 if CC_HAS_INT128
        select ARCH_USE_CMPXCHG_LOCKREF
+       select ARCH_USE_GNU_PROPERTY
        select HAVE_ARCH_SOFT_DIRTY
        select MODULES_USE_ELF_RELA
        select NEED_DMA_MAP_STATE
@@ -60,6 +61,7 @@ config X86
        select ACPI_LEGACY_TABLES_LOOKUP        if ACPI
        select ACPI_SYSTEM_POWER_STATES_SUPPORT if ACPI
        select ARCH_32BIT_OFF_T                 if X86_32
+       select ARCH_BINFMT_ELF_STATE
        select ARCH_CLOCKSOURCE_INIT
        select ARCH_CORRECT_STACKTRACE_ON_KRETPROBE
        select ARCH_ENABLE_HUGEPAGE_MIGRATION if X86_64 && HUGETLB_PAGE && MIGRATION
@@ -1977,6 +1979,17 @@ config X86_USER_SHADOW_STACK
 
          If unsure, say N.
 
+config X86_USER_SHADOW_STACK_ALLOW_BROKEN
+       bool "Allow enabling shadow stack for broken binaries"
+       depends on EXPERT
+       depends on X86_USER_SHADOW_STACK
+       help
+         There exist old binaries that are marked as compatible with shadow
+         stack, but actually aren't. The kernel blocks these binaries from
+         getting shadow stack enabled by default. But some working binaries
+         are also blocked. Select this option if you would like to allow these
+         binaries to run with shadow stack, and possibly crash.
+
 config EFI
        bool "EFI runtime service support"
        depends on ACPI
arch/x86/include/asm/cet.h +2 -0
index 098e4ecfdf9b..7f0cabb3db21 100644
@@ -22,6 +22,7 @@ int shstk_alloc_thread_stack(struct task_struct *p, unsigned long clone_flags,
 void shstk_free(struct task_struct *p);
 int setup_signal_shadow_stack(struct ksignal *ksig);
 int restore_signal_shadow_stack(void);
+void bad_cet_binary_disable(bool disable);
 #else
 static inline long cet_prctl(struct task_struct *task, int option,
                             unsigned long features) { return -EINVAL; }
@@ -33,6 +34,7 @@ static inline int shstk_alloc_thread_stack(struct task_struct *p,
 static inline void shstk_free(struct task_struct *p) {}
 static inline int setup_signal_shadow_stack(struct ksignal *ksig) { return 0; }
 static inline int restore_signal_shadow_stack(void) { return 0; }
+static inline void bad_cet_binary_disable(bool disable) {};
 #endif /* CONFIG_X86_USER_SHADOW_STACK */
 
 #endif /* __ASSEMBLY__ */
arch/x86/include/asm/elf.h +11 -0
index cb0ff1055ab1..95ee133acffb 100644
@@ -383,6 +383,17 @@ extern int compat_arch_setup_additional_pages(struct linux_binprm *bprm,
 
 extern bool arch_syscall_is_vdso_sigreturn(struct pt_regs *regs);
 
+struct arch_elf_state {
+       unsigned int gnu_property;
+};
+
+#define INIT_ARCH_ELF_STATE {  \
+       .gnu_property = 0,      \
+}
+
+#define arch_elf_pt_proc(ehdr, phdr, elf, interp, state) (0)
+#define arch_check_elf(ehdr, interp, interp_ehdr, state) (0)
+
 /* Do not change the values. See get_align_mask() */
 enum align_flags {
        ALIGN_VA_32     = BIT(0),
arch/x86/include/asm/processor.h +1 -0
index a6c414dfd10f..4b333c801010 100644
@@ -534,6 +534,7 @@ struct thread_struct {
 #ifdef CONFIG_X86_USER_SHADOW_STACK
        unsigned long           features;
        unsigned long           features_locked;
+       bool                    bad_cet_binary_disable;
 
        struct thread_shstk     shstk;
 #endif
arch/x86/kernel/process_64.c +33 -0
index 03bc16c9cc19..461b8e9468df 100644
@@ -867,3 +867,36 @@ unsigned long KSTK_ESP(struct task_struct *task)
 {
        return task_pt_regs(task)->sp;
 }
+
+#ifdef CONFIG_X86_USER_SHADOW_STACK
+int arch_parse_elf_property(u32 type, const void *data, size_t datasz,
+                           bool compat, struct arch_elf_state *state)
+{
+       if (type != GNU_PROPERTY_X86_FEATURE_1_AND)
+               return 0;
+
+       if (datasz != sizeof(unsigned int))
+               return -ENOEXEC;
+
+       state->gnu_property = *(unsigned int *)data;
+       return 0;
+}
+
+int arch_process_elf_property(struct arch_elf_state *state)
+{
+       bad_cet_binary_disable(state->gnu_property & GNU_PROPERTY_X86_FEATURE_1_BAD);
+       return 0;
+}
+#else /* CONFIG_X86_USER_SHADOW_STACK */
+int arch_parse_elf_property(u32 type, const void *data, size_t datasz,
+                           bool compat, struct arch_elf_state *state)
+{
+       return 0;
+}
+
+int arch_process_elf_property(struct arch_elf_state *state)
+{
+       return 0;
+}
+#endif /* CONFIG_X86_USER_SHADOW_STACK */
+
arch/x86/kernel/shstk.c +15 -0
index bed7032d35f2..cb105e69c840 100644
@@ -445,6 +445,9 @@ SYSCALL_DEFINE3(map_shadow_stack, unsigned long, addr, unsigned long, size, unsi
 
 long cet_prctl(struct task_struct *task, int option, unsigned long features)
 {
+       if (task->thread.bad_cet_binary_disable)
+               return -EINVAL;
+
        if (option == ARCH_CET_LOCK) {
                task->thread.features_locked |= features;
                return 0;
@@ -482,3 +485,15 @@ long cet_prctl(struct task_struct *task, int option, unsigned long features)
                return wrss_control(true);
        return -EINVAL;
 }
+
+#ifdef CONFIG_X86_USER_SHADOW_STACK_ALLOW_BROKEN
+void bad_cet_binary_disable(bool disable)
+{
+       current->thread.bad_cet_binary_disable = false;
+}
+#else /* CONFIG_X86_USER_SHADOW_STACK_ALLOW_BROKEN */
+void bad_cet_binary_disable(bool disable)
+{
+       current->thread.bad_cet_binary_disable = disable;
+}
+#endif /* CONFIG_X86_USER_SHADOW_STACK_ALLOW_BROKEN */
fs/binfmt_elf.c +23 -1
index 6a11025e5850..8b6ae5e423fb 100644
@@ -764,6 +764,8 @@ static int parse_elf_property(const char *data, size_t *off, size_t datasz,
 #define GNU_PROPERTY_TYPE_0_NAME "GNU"
 #define NOTE_NAME_SZ (sizeof(GNU_PROPERTY_TYPE_0_NAME))
 
+
+
 static int parse_elf_properties(struct file *f, const struct elf_phdr *phdr,
                                struct arch_elf_state *arch)
 {
@@ -821,6 +823,18 @@ static int parse_elf_properties(struct file *f, const struct elf_phdr *phdr,
        return ret == -ENOENT ? 0 : ret;
 }
 
+static int check_elf_properties(struct file *f, const struct elf_phdr *phdr)
+{
+       struct arch_elf_state arch_state = INIT_ARCH_ELF_STATE;
+       int retval;
+
+       retval = parse_elf_properties(f, phdr, &arch_state);
+       if (retval)
+               return retval;
+
+       return arch_process_elf_property(&arch_state);
+}
+
 static int load_elf_binary(struct linux_binprm *bprm)
 {
        struct file *interpreter = NULL; /* to shut gcc up */
@@ -920,13 +934,21 @@ static int load_elf_binary(struct linux_binprm *bprm)
                if (retval < 0)
                        goto out_free_dentry;
 
-               break;
+               /* Quit if already found PT_GNU_PROPERTY */
+               if (elf_property_phdata)
+                       break;
+
+               continue;
 
 out_free_interp:
                kfree(elf_interpreter);
                goto out_free_ph;
        }
 
+       retval = check_elf_properties(bprm->file, elf_property_phdata);
+       if (retval)
+               return retval;
+
        elf_ppnt = elf_phdata;
        for (i = 0; i < elf_ex->e_phnum; i++, elf_ppnt++)
                switch (elf_ppnt->p_type) {
include/linux/elf.h +6 -0
index c9a46c4e183b..faf961b92a95 100644
@@ -92,9 +92,15 @@ static inline int arch_parse_elf_property(u32 type, const void *data,
 {
        return 0;
 }
+
+static inline int arch_process_elf_property(struct arch_elf_state *arch)
+{
+       return 0;
+}
 #else
 extern int arch_parse_elf_property(u32 type, const void *data, size_t datasz,
                                   bool compat, struct arch_elf_state *arch);
+extern int arch_process_elf_property(struct arch_elf_state *arch);
 #endif
 
 #ifdef CONFIG_ARCH_HAVE_ELF_PROT
include/uapi/linux/elf.h +15 -1
index 11089731e2e9..d9b58adce321 100644
@@ -469,4 +469,19 @@ typedef struct elf64_note {
 /* Bits for GNU_PROPERTY_AARCH64_FEATURE_1_BTI */
 #define GNU_PROPERTY_AARCH64_FEATURE_1_BTI     (1U << 0)
 
+/*
+ * See the x86 64 psABI at:
+ * https://gitlab.com/x86-psABIs/x86-64-ABI/-/wikis/x86-64-psABI
+ * .note.gnu.property types for x86:
+ */
+/* 0xc0000000 and 0xc0000001 are reserved */
+#define GNU_PROPERTY_X86_FEATURE_1_AND         0xc0000002
+
+/* Bits for GNU_PROPERTY_X86_FEATURE_1_AND */
+#define GNU_PROPERTY_X86_FEATURE_1_IBT         0x00000001
+#define GNU_PROPERTY_X86_FEATURE_1_SHSTK       0x00000002
+
+#define GNU_PROPERTY_X86_FEATURE_1_BAD (GNU_PROPERTY_X86_FEATURE_1_IBT | \
+                                        GNU_PROPERTY_X86_FEATURE_1_SHSTK)
+
 #endif /* _UAPI_LINUX_ELF_H */
--
Quoted 2 lines

2.17.1

This change doesn't make a binary CET compatible. It just requires that the toolchain
must be updated and all binaries have to be recompiled with the new toolchain to enable CET. It doesn't solve any issue which can't be solved by not updating glibc.

Signature · 1 line
H.J.
#91 lore raw

Re: [RFC 37/37] fs/binfmt_elf: Block old shstk elf bit

* H. J. Lu:

Quoted 4 lines

This change doesn't make a binary CET compatible. It just requires that the toolchain must be updated and all binaries have to be recompiled with the new toolchain to enable CET. It doesn't solve any issue which can't be solved by not updating glibc.

Right, and it doesn't even address the library case (the kernel would have to hook into mmap for that). The kernel shouldn't do this.

Thanks,
Florian

#92 lore raw

Re: [RFC 37/37] fs/binfmt_elf: Block old shstk elf bit

Quoted 10 lines · Florian Weimer

* H. J. Lu:

Quoted 5 lines

This change doesn't make a binary CET compatible. It just requires that the toolchain must be updated and all binaries have to be recompiled with the new toolchain to enable CET. It doesn't solve any
issue which can't be solved by not updating glibc.

Right, and it doesn't even address the library case (the kernel would have to hook into mmap for that). The kernel shouldn't do this.

Shadow stack shouldn't enable as a result of loading a library, if that's what you mean.

#93 lore raw

Re: [RFC 37/37] fs/binfmt_elf: Block old shstk elf bit

* Rick P. Edgecombe:

Quoted 9 lines · Florian Weimer
Quoted 8 lines

* H. J. Lu:

Quoted 5 lines

This change doesn't make a binary CET compatible. It just requires that the toolchain must be updated and all binaries have to be recompiled with the new toolchain to enable CET. It doesn't solve any
issue which can't be solved by not updating glibc.

Quoted 5 lines
Quoted 2 lines

Right, and it doesn't even address the library case (the kernel would have to hook into mmap for that). The kernel shouldn't do this.

Shadow stack shouldn't enable as a result of loading a library, if that's what you mean.

It's the opposite—loading incompatible libraries needs to disable shadow stack (or ideally, not enable it in the first place). Technically, I think most incompatible code resides in libraries, so this kernel change achieves nothing besides punishing early implementations of the published-as-finalized x86-64 ABI.

Thanks,
Florian

#94 lore raw

Re: [RFC 37/37] fs/binfmt_elf: Block old shstk elf bit

Quoted 17 lines · Florian Weimer

* Rick P. Edgecombe:

Quoted 15 lines · Florian Weimer
Quoted 13 lines

* H. J. Lu:

Quoted 7 lines

This change doesn't make a binary CET compatible. It just requires
that the toolchain must be updated and all binaries have to be recompiled with the new toolchain to enable CET. It doesn't solve
any
issue which can't be solved by not updating glibc.

Right, and it doesn't even address the library case (the kernel would
have to hook into mmap for that). The kernel shouldn't do this.

Quoted 6 lines
Quoted 2 lines

Shadow stack shouldn't enable as a result of loading a library, if that's what you mean.

It's the opposite—loading incompatible libraries needs to disable shadow
stack (or ideally, not enable it in the first place).

The glibc changes I have been using would not have enabled shadow stack in the first place unless the execing binary has the elf bit. So the binary would run as if shadow stack was not enabled in the kernel and there should be nothing to disable when an incompatible binary is loaded. Glibc will have to detect this and act accordingly because not all kernels will have shadow stack configured.

Quoted 5 lines

Technically, I
think most incompatible code resides in libraries, so this kernel change
achieves nothing besides punishing early implementations of the published-as-finalized x86-64 ABI.

It's under the assumption that not breaking things is more important than having shadow stack enabled. So it is not intended as a punishment for users at all, rather the opposite.

I'm not sure how much the spec mandates things by the letter of it, but in any case things have gone wrong in the real world. I am very open to discussion here. I only went this way as a last resort because I didn't hear back on the last thread.

#95 lore raw

Re: [RFC 37/37] fs/binfmt_elf: Block old shstk elf bit

Quoted 39 lines · Rick P
Quoted 17 lines · Florian Weimer

* Rick P. Edgecombe:

Quoted 15 lines · Florian Weimer
Quoted 13 lines

* H. J. Lu:

Quoted 7 lines

This change doesn't make a binary CET compatible. It just requires
that the toolchain must be updated and all binaries have to be recompiled with the new toolchain to enable CET. It doesn't solve
any
issue which can't be solved by not updating glibc.

Right, and it doesn't even address the library case (the kernel would
have to hook into mmap for that). The kernel shouldn't do this.

Quoted 6 lines
Quoted 2 lines

Shadow stack shouldn't enable as a result of loading a library, if that's what you mean.

It's the opposite—loading incompatible libraries needs to disable shadow
stack (or ideally, not enable it in the first place).

The glibc changes I have been using would not have enabled shadow stack in the first place unless the execing binary has the elf bit. So the binary would run as if shadow stack was not enabled in the kernel and there should be nothing to disable when an incompatible binary is loaded. Glibc will have to detect this and act accordingly because not all kernels will have shadow stack configured.

Quoted 5 lines

Technically, I
think most incompatible code resides in libraries, so this kernel change
achieves nothing besides punishing early implementations of the published-as-finalized x86-64 ABI.

Quoted 8 lines

It's under the assumption that not breaking things is more important than having shadow stack enabled. So it is not intended as a punishment for users at all, rather the opposite.

I'm not sure how much the spec mandates things by the letter of it, but in any case things have gone wrong in the real world. I am very open to discussion here. I only went this way as a last resort because I didn't hear back on the last thread.

Some applications and libraries are compiled with -fcf-protection, but they manipulate the stack in such a way that they aren't compatible
with the shadow stack. However, if the build/test setup doesn't support
shadow stack, it is impossible to validate.

Signature · 1 line
H.J.
#96 lore raw

Re: [RFC 37/37] fs/binfmt_elf: Block old shstk elf bit

Quoted 64 lines · H.J. Lu
Quoted 54 lines · Rick P
Quoted 21 lines · Florian Weimer

* Rick P. Edgecombe:

Quoted 19 lines · Florian Weimer
Quoted 17 lines

* H. J. Lu:

Quoted 9 lines

This change doesn't make a binary CET compatible. It just requires
that the toolchain must be updated and all binaries have to be
recompiled with the new toolchain to enable CET. It doesn't
solve
any
issue which can't be solved by not updating glibc.

Right, and it doesn't even address the library case (the kernel
would
have to hook into mmap for that). The kernel shouldn't do this.

Quoted 7 lines
Quoted 3 lines

Shadow stack shouldn't enable as a result of loading a library, if
that's what you mean.

It's the opposite—loading incompatible libraries needs to disable shadow
stack (or ideally, not enable it in the first place).

The glibc changes I have been using would not have enabled shadow stack
in the first place unless the execing binary has the elf bit. So the
binary would run as if shadow stack was not enabled in the kernel and
there should be nothing to disable when an incompatible binary is loaded. Glibc will have to detect this and act accordingly because not
all kernels will have shadow stack configured.

Quoted 5 lines

Technically, I
think most incompatible code resides in libraries, so this kernel change
achieves nothing besides punishing early implementations of the published-as-finalized x86-64 ABI.

It's under the assumption that not breaking things is more important
than having shadow stack enabled. So it is not intended as a punishment
for users at all, rather the opposite.

Quoted 7 lines

I'm not sure how much the spec mandates things by the letter of it, but
in any case things have gone wrong in the real world. I am very open to
discussion here. I only went this way as a last resort because I didn't
hear back on the last thread.

Quoted 7 lines

Some applications and libraries are compiled with -fcf-protection, but
they manipulate the stack in such a way that they aren't compatible
with the shadow stack. However, if the build/test setup doesn't
support
shadow stack, it is impossible to validate.

When we have everything in place, the problems would be much more obvious when distros started turning it on. But we can't turn it on as planned without breaking things for existing binaries. We can have both by:
1. Choosing a new bit, adding it to the tools, and never supporting the old bit in glibc.
2. Providing the option to have the kernel block the old bit, so upgraded users can decide what experience they would like. Then distros can find the problems and adjust their packages. I'm starting to think a default off sysctl toggle might be better than a Kconfig.
3. Any other ideas?

#97 lore raw

Re: [RFC 37/37] fs/binfmt_elf: Block old shstk elf bit

Quoted 74 lines · Rick P
Quoted 64 lines · H.J. Lu
Quoted 54 lines · Rick P
Quoted 21 lines · Florian Weimer

* Rick P. Edgecombe:

Quoted 19 lines · Florian Weimer
Quoted 17 lines

* H. J. Lu:

Quoted 9 lines

This change doesn't make a binary CET compatible. It just requires
that the toolchain must be updated and all binaries have to be
recompiled with the new toolchain to enable CET. It doesn't
solve
any
issue which can't be solved by not updating glibc.

Right, and it doesn't even address the library case (the kernel
would
have to hook into mmap for that). The kernel shouldn't do this.

Quoted 7 lines
Quoted 3 lines

Shadow stack shouldn't enable as a result of loading a library, if
that's what you mean.

It's the opposite—loading incompatible libraries needs to disable shadow
stack (or ideally, not enable it in the first place).

The glibc changes I have been using would not have enabled shadow stack
in the first place unless the execing binary has the elf bit. So the
binary would run as if shadow stack was not enabled in the kernel and
there should be nothing to disable when an incompatible binary is loaded. Glibc will have to detect this and act accordingly because not
all kernels will have shadow stack configured.

Quoted 5 lines

Technically, I
think most incompatible code resides in libraries, so this kernel change
achieves nothing besides punishing early implementations of the published-as-finalized x86-64 ABI.

It's under the assumption that not breaking things is more important
than having shadow stack enabled. So it is not intended as a punishment
for users at all, rather the opposite.

Quoted 7 lines

I'm not sure how much the spec mandates things by the letter of it, but
in any case things have gone wrong in the real world. I am very open to
discussion here. I only went this way as a last resort because I didn't
hear back on the last thread.

Quoted 7 lines

Some applications and libraries are compiled with -fcf-protection, but
they manipulate the stack in such a way that they aren't compatible
with the shadow stack. However, if the build/test setup doesn't
support
shadow stack, it is impossible to validate.

Quoted 2 lines

When we have everything in place, the problems would be much more obvious when distros started turning it on. But we can't turn it on as

Not necessarily. The problem will show up only in a CET enabled environment since build/test setup may not be on a CET capable hardware.

Quoted 9 lines

planned without breaking things for existing binaries. We can have both by:
1. Choosing a new bit, adding it to the tools, and never supporting the old bit in glibc.
2. Providing the option to have the kernel block the old bit, so upgraded users can decide what experience they would like. Then distros can find the problems and adjust their packages. I'm starting to think a default off sysctl toggle might be better than a Kconfig.
3. Any other ideas?

Don't enable CET in glibc until we can validate CET functionality.

Signature · 1 line
H.J.
#98 lore raw

Re: [RFC 37/37] fs/binfmt_elf: Block old shstk elf bit

Quoted 10 lines · H.J. Lu
Quoted 10 lines
Quoted 9 lines

Some applications and libraries are compiled with -fcf- protection,
but
they manipulate the stack in such a way that they aren't compatible
with the shadow stack. However, if the build/test setup doesn't
support
shadow stack, it is impossible to validate.

Quoted 7 lines
Quoted 3 lines

When we have everything in place, the problems would be much more obvious when distros started turning it on. But we can't turn it on as

Not necessarily. The problem will show up only in a CET enabled environment since build/test setup may not be on a CET capable hardware.

Well, I'm not sure of the details of distro testing, but there are plenty of TGL and later systems out there today. With kernel support, I'm thinking these types of problems couldn't lurk for years like they have.

Quoted 15 lines
Quoted 14 lines

planned without breaking things for existing binaries. We can have both
by:
1. Choosing a new bit, adding it to the tools, and never supporting the
old bit in glibc.
2. Providing the option to have the kernel block the old bit, so upgraded users can decide what experience they would like. Then distros
can find the problems and adjust their packages. I'm starting to think
a default off sysctl toggle might be better than a Kconfig.
3. Any other ideas?

Quoted 1 line

Don't enable CET in glibc until we can validate CET functionality.

Can you elaborate on what you mean by this? Not upstream glibc CET support? Or have users not enable it? If the latter, how would they know about all these problems.

And what is wrong with the cleanest option, number 1? The ABI document can be updated.

#99 lore raw

Re: [RFC 37/37] fs/binfmt_elf: Block old shstk elf bit

Quoted 16 lines · Rick P
Quoted 14 lines · H.J. Lu
Quoted 13 lines
Quoted 9 lines

Some applications and libraries are compiled with -fcf- protection,
but
they manipulate the stack in such a way that they aren't compatible
with the shadow stack. However, if the build/test setup doesn't
support
shadow stack, it is impossible to validate.

When we have everything in place, the problems would be much more obvious when distros started turning it on. But we can't turn it on as

Quoted 8 lines
Quoted 3 lines

Not necessarily. The problem will show up only in a CET enabled environment since build/test setup may not be on a CET capable hardware.

Well, I'm not sure of the details of distro testing, but there are plenty of TGL and later systems out there today. With kernel support, I'm thinking these types of problems couldn't lurk for years like they have.

If this is the case, we would have nothing to worry about since the CET enabled applications won't pass validation if they aren't CET compatible.

Quoted 15 lines
Quoted 15 lines
Quoted 14 lines

planned without breaking things for existing binaries. We can have both
by:
1. Choosing a new bit, adding it to the tools, and never supporting the
old bit in glibc.
2. Providing the option to have the kernel block the old bit, so upgraded users can decide what experience they would like. Then distros
can find the problems and adjust their packages. I'm starting to think
a default off sysctl toggle might be better than a Kconfig.
3. Any other ideas?

Quoted 5 lines
Quoted 1 line

Don't enable CET in glibc until we can validate CET functionality.

Can you elaborate on what you mean by this? Not upstream glibc CET support? Or have users not enable it? If the latter, how would they know about all these problems.

The current glibc doesn't support CET. To enable CET in an application, one should validate it together with the CET enabled glibc under the CET enabled kernel on a CET capable machine.

Quoted 3 lines

And what is wrong with the cleanest option, number 1? The ABI document can be updated.

It doesn't help resolve any issues.

Signature · 1 line
H.J.
#100 lore raw

Re: [RFC 37/37] fs/binfmt_elf: Block old shstk elf bit

Quoted 32 lines · H.J. Lu
Quoted 23 lines · Rick P
Quoted 17 lines · H.J. Lu
Quoted 11 lines
Quoted 10 lines

Some applications and libraries are compiled with -fcf- protection,
but
they manipulate the stack in such a way that they aren't compatible
with the shadow stack. However, if the build/test setup
doesn't
support
shadow stack, it is impossible to validate.

Quoted 5 lines

When we have everything in place, the problems would be much more
obvious when distros started turning it on. But we can't turn it on
as

Quoted 3 lines

Not necessarily. The problem will show up only in a CET enabled environment since build/test setup may not be on a CET capable hardware.

Quoted 6 lines

Well, I'm not sure of the details of distro testing, but there are plenty of TGL and later systems out there today. With kernel support,
I'm thinking these types of problems couldn't lurk for years like they
have.

Quoted 4 lines

If this is the case, we would have nothing to worry about since the CET
enabled applications won't pass validation if they aren't CET compatible.

Hmm, I think you couldn't have already forgotten the problem binaries are already shipped...

Quoted 27 lines
Quoted 20 lines
Quoted 20 lines
Quoted 19 lines

planned without breaking things for existing binaries. We can have
both
by:
1. Choosing a new bit, adding it to the tools, and never supporting
the
old bit in glibc.
2. Providing the option to have the kernel block the old bit, so
upgraded users can decide what experience they would like. Then distros
can find the problems and adjust their packages. I'm starting to
think
a default off sysctl toggle might be better than a Kconfig.
3. Any other ideas?

Quoted 6 lines
Quoted 2 lines

Don't enable CET in glibc until we can validate CET functionality.

Can you elaborate on what you mean by this? Not upstream glibc CET support? Or have users not enable it? If the latter, how would they know about all these problems.

Quoted 5 lines

The current glibc doesn't support CET. To enable CET in an application,
one should validate it together with the CET enabled glibc under the CET
enabled kernel on a CET capable machine.

Agreed that this is how it should have gone.

Quoted 7 lines
Quoted 5 lines

And what is wrong with the cleanest option, number 1? The ABI document
can be updated.

It doesn't help resolve any issues.

Please read the coverletter if you are unsure of what issues this is trying to address. I should have put more in the commit log.

#101 lore raw

Re: [RFC 37/37] fs/binfmt_elf: Block old shstk elf bit

Quoted 34 lines · Rick P
Quoted 32 lines · H.J. Lu
Quoted 29 lines · Rick P
Quoted 17 lines · H.J. Lu
Quoted 11 lines
Quoted 10 lines

Some applications and libraries are compiled with -fcf- protection,
but
they manipulate the stack in such a way that they aren't compatible
with the shadow stack. However, if the build/test setup
doesn't
support
shadow stack, it is impossible to validate.

Quoted 5 lines

When we have everything in place, the problems would be much more
obvious when distros started turning it on. But we can't turn it on
as

Quoted 3 lines

Not necessarily. The problem will show up only in a CET enabled environment since build/test setup may not be on a CET capable hardware.

Well, I'm not sure of the details of distro testing, but there are plenty of TGL and later systems out there today. With kernel support,
I'm thinking these types of problems couldn't lurk for years like they
have.

Quoted 7 lines
Quoted 4 lines

If this is the case, we would have nothing to worry about since the CET
enabled applications won't pass validation if they aren't CET compatible.

Hmm, I think you couldn't have already forgotten the problem binaries are already shipped...

It should be OK since glibc doesn't support CET.

Quoted 48 lines
Quoted 27 lines
Quoted 20 lines
Quoted 20 lines
Quoted 19 lines

planned without breaking things for existing binaries. We can have
both
by:
1. Choosing a new bit, adding it to the tools, and never supporting
the
old bit in glibc.
2. Providing the option to have the kernel block the old bit, so
upgraded users can decide what experience they would like. Then distros
can find the problems and adjust their packages. I'm starting to
think
a default off sysctl toggle might be better than a Kconfig.
3. Any other ideas?

Quoted 6 lines
Quoted 2 lines

Don't enable CET in glibc until we can validate CET functionality.

Can you elaborate on what you mean by this? Not upstream glibc CET support? Or have users not enable it? If the latter, how would they know about all these problems.

Quoted 5 lines

The current glibc doesn't support CET. To enable CET in an application,
one should validate it together with the CET enabled glibc under the CET
enabled kernel on a CET capable machine.

Agreed that this is how it should have gone.

Quoted 7 lines
Quoted 5 lines

And what is wrong with the cleanest option, number 1? The ABI document
can be updated.

It doesn't help resolve any issues.

Please read the coverletter if you are unsure of what issues this is trying to address. I should have put more in the commit log.

Signature · 1 line
H.J.
#102 lore raw

Re: [RFC 37/37] fs/binfmt_elf: Block old shstk elf bit

In reply to Edgecombe, Rick P

* Rick P. Edgecombe:

Quoted 11 lines

When we have everything in place, the problems would be much more obvious when distros started turning it on. But we can't turn it on as planned without breaking things for existing binaries. We can have both by:
1. Choosing a new bit, adding it to the tools, and never supporting the old bit in glibc.
2. Providing the option to have the kernel block the old bit, so upgraded users can decide what experience they would like. Then distros can find the problems and adjust their packages. I'm starting to think a default off sysctl toggle might be better than a Kconfig.
3. Any other ideas?

This problem is fairly common nowadays for new system calls. Before glibc can use them internally, we need to port userspace first, otherwise key applications fail to work. Yet we do not require ELF markup to make the new system call available to glibc.

The situation here seems similar: before deploying a new glibc, we need to upgrade parts of userspace.

Thanks,
Florian

#103 lore raw

Re: [RFC 37/37] fs/binfmt_elf: Block old shstk elf bit

In reply to H.J. Lu
Quoted 5 lines · H.J. Lu

This change doesn't make a binary CET compatible. It just requires that the toolchain
must be updated and all binaries have to be recompiled with the new toolchain to
enable CET.

I guess you mean distros could again blindly mark all binaries as supporting shadow stack? I think they would see the failures pretty quickly in this case, unlike the first time where there was little HW and no kernel support.

Quoted 2 lines

It doesn't solve any issue which can't be solved by not
updating glibc.

If users never updates glibc, there won't be a problem, as I elaborated on in the coverletter. But how are they supposed to know the consequences of turning on CET?