Skip to contentSkip to conversation

arm: mvebu: Support for 98DX25xx/98DX35xx (AlleyCat5)

PATCH In review Chris Packham 3 participants 11 messages Nov 5, 2022 – Nov 9, 2022

Subsystems (7)
lore
Share & tools
lore
#0 lore raw

v6 cover arm: mvebu: Support for 98DX25xx/98DX35xx (AlleyCat5)

These patches are based on Marvell's bootloader for the AlleyCat5/5X which was based on u-boot 2018.03. I've split that code into consumable chunks and dropped as much unnecessary stuff as I can. I've also tried to sync the device trees as much as possible with the support that will land in Linux 6.0 although there are still some differences

Changes in v6:
- Set CONFIG_DEFAULT_DEVICE_TREE and CONFIG_TEXT_BASE

Changes in v5:
- Minor white space cleanups
- Collect review from Stefan
- Minor fixup for checkpatch.pl complaint
- Remove unused bpard_{early,late}_init{,_r,_f} functions
- Remove CPNFIG_PCI and CONFIG_E1000 as the PCI interface is not currently working (requires more vendor code)
- Use CONFIG_OF_SEPARATE instead of CONFIG_OF_EMBED

Changes in v4:
- Collect r-by from Stefan
- Remove unused mvebu_get_nand_clock() (will return in a later series)
- Remove unnecessary #ifdefs
- Misc style cleanups
- Replace CONFIG_MVEBU_SAR with simpler code implemented directly in soc.c based around get_sar_freq which the 32-bit platforms already use.
- Move CONFIG_DISPLAY_BOARDINFO_LATE and CONFIG_ENV_OVERWRITE to the defconfig.
- Remove CONFIG_BAUDRATE as this is already set in the default config
- Remove CONFIG_USB_MAX_CONTROLLER_COUNT as this is not needed with DM_USB
- Remove CONFIG_PREBOOT as we don't have anything to run
- Remove commented out CONFIG_BOARD_EARLY_INIT_R
- Remove DEBUG_UART configuration
- Remove unnecessary console environment variable
- Remove CONFIG_MVEBU_SAR

Changes in v3:
- Remove unnecessary changes to RX descriptor handling
- Use dev_get_dma_range() to parse dma-ranges property from parent device.
- Remove unnecessary dma-ranges property from ethernet nodes (mvneta now correctly parses the property from the parent node).
- Keep soc_print_clock_info and soc_print_device_info local to alleycat5.
- Remove MMC and UBIFS distroboot options (MMC driver is not currently functional, NAND is not populated on the RD-AC5X board)
- Remove unnecessary Ethernet configuration
- Remove unnecessary NAND configuration
- Remove memory node from dts so the value passed by the DDR FW will be used

Changes in v2:
- Use distro boot by default
- remove unnecessary SPI-NOR partitions

Chris Packham (6):
arm: mvebu: Don't use CONFIG_TIMER on ARM64
net: mvneta: Add support for AlleyCat5
usb: ehci: ehci-marvell: Support for marvell,ac5-ehci
pinctrl: mvebu: Add AlleyCat5 support
arm: mvebu: Support for 98DX25xx/98DX35xx SoC
arm: mvebu: Add RD-AC5X board

 arch/arm/Kconfig                           |   2 +-
 arch/arm/dts/Makefile                      |   3 +-
 arch/arm/dts/ac5-98dx25xx.dtsi             | 277 +++++++++++++++++++
 arch/arm/dts/ac5-98dx35xx-rd.dts           | 129 +++++++++
 arch/arm/dts/ac5-98dx35xx.dtsi             |  17 ++
 arch/arm/mach-mvebu/Kconfig                |  13 +-
 arch/arm/mach-mvebu/Makefile               |   1 +
 arch/arm/mach-mvebu/alleycat5/Makefile     |   8 +
 arch/arm/mach-mvebu/alleycat5/cpu.c        | 124 +++++++++
 arch/arm/mach-mvebu/alleycat5/soc.c        | 298 +++++++++++++++++++++
 arch/arm/mach-mvebu/alleycat5/soc.h        |   7 +
 arch/arm/mach-mvebu/arm64-common.c         |   5 +
 arch/arm/mach-mvebu/include/mach/cpu.h     |   4 +
 board/Marvell/mvebu_alleycat-5/MAINTAINERS |   6 +
 board/Marvell/mvebu_alleycat-5/Makefile    |   3 +
 board/Marvell/mvebu_alleycat-5/board.c     |  13 +
 configs/mvebu_ac5_rd_defconfig             |  81 ++++++
 drivers/net/Kconfig                        |   2 +-
 drivers/net/mvneta.c                       |  43 ++-
 drivers/pinctrl/mvebu/Kconfig              |   2 +-
 drivers/usb/host/Kconfig                   |   1 +
 drivers/usb/host/ehci-marvell.c            |  53 +++-
 include/configs/mvebu_alleycat-5.h         |  42 +++
 23 files changed, 1120 insertions(+), 14 deletions(-)
 create mode 100644 arch/arm/dts/ac5-98dx25xx.dtsi
 create mode 100644 arch/arm/dts/ac5-98dx35xx-rd.dts
 create mode 100644 arch/arm/dts/ac5-98dx35xx.dtsi
 create mode 100644 arch/arm/mach-mvebu/alleycat5/Makefile
 create mode 100644 arch/arm/mach-mvebu/alleycat5/cpu.c
 create mode 100644 arch/arm/mach-mvebu/alleycat5/soc.c
 create mode 100644 arch/arm/mach-mvebu/alleycat5/soc.h
 create mode 100644 board/Marvell/mvebu_alleycat-5/MAINTAINERS
 create mode 100644 board/Marvell/mvebu_alleycat-5/Makefile
 create mode 100644 board/Marvell/mvebu_alleycat-5/board.c
 create mode 100644 configs/mvebu_ac5_rd_defconfig
 create mode 100644 include/configs/mvebu_alleycat-5.h
Signature · 1 line
2.38.1
#1 lore raw

PATCH v6 1/6 arm: mvebu: Don't use CONFIG_TIMER on ARM64

The 64-bit mvebu SoCs don't have a suitable timer driver so add a !ARM64 condition to the select.

Fixes 7b530bb19e ("arm: mvebu: Use CONFIG_TIMER on all MVEBU & KIRKWOOD platforms")

---

(no changes since v1)

 arch/arm/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/Kconfig +1 -1
index 453bef900e..7866e8f3c4 100644
@@ -640,7 +640,7 @@ config ARCH_MVEBU
 	select SPL_DM_SPI if SPL
 	select SPL_DM_SPI_FLASH if SPL
 	select SPL_TIMER if SPL
-	select TIMER
+	select TIMER if !ARM64
 	select OF_CONTROL
 	select OF_SEPARATE
 	select SPI
Signature · 1 line
2.38.1
Reviewed-by on v6 1/6
#2 lore raw

Re: [PATCH v6 1/6] arm: mvebu: Don't use CONFIG_TIMER on ARM64

Quoted 17 lines · Chris Packham

The 64-bit mvebu SoCs don't have a suitable timer driver so add a !ARM64 condition to the select.

Fixes 7b530bb19e ("arm: mvebu: Use CONFIG_TIMER on all MVEBU & KIRKWOOD platforms")

---

(no changes since v1)

  arch/arm/Kconfig | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/Kconfig +0 -0
index 453bef900e..7866e8f3c4 100644

arch/arm/Kconfig config ARCH_MVEBU · line 646

Quoted 8 lines
arch/arm/Kconfig +1 -1
@@ -640,7 +640,7 @@ config ARCH_MVEBU
  	select SPL_DM_SPI if SPL
  	select SPL_DM_SPI_FLASH if SPL
  	select SPL_TIMER if SPL
-	select TIMER
+	select TIMER if !ARM64
  	select OF_CONTROL
  	select OF_SEPARATE
  	select SPI

Thanks,
Stefan

#3 lore raw

PATCH v6 2/6 net: mvneta: Add support for AlleyCat5

In reply to Chris Packham

Add support for the AlleyCat5 SoC. This lacks the mbus from the other users of the mvneta.c driver so a new compatible string is needed to allow for a different window configuration.

---

(no changes since v3)

Changes in v3:
- Remove unnecessary changes to RX descriptor handling
- Use dev_get_dma_range() to parse dma-ranges property from parent device.

 drivers/net/Kconfig  |  2 +-
 drivers/net/mvneta.c | 43 ++++++++++++++++++++++++++++++++++++++++++-
 2 files changed, 43 insertions(+), 2 deletions(-)
drivers/net/Kconfig +1 -1
index 6bbbadc5ee..8df3dce6df 100644
@@ -448,7 +448,7 @@ config MVGBE
 
 config MVNETA
 	bool "Marvell Armada XP/385/3700 network interface support"
-	depends on ARMADA_XP || ARMADA_38X || ARMADA_3700
+	depends on ARMADA_XP || ARMADA_38X || ARMADA_3700 || ALLEYCAT_5
 	select PHYLIB
 	select DM_MDIO
 	help
drivers/net/mvneta.c +42 -1

88 lines not on this page · raw message

Signature · 1 line
2.38.1
Reviewed-by on v6 2/6
#4 lore raw

Re: [PATCH v6 2/6] net: mvneta: Add support for AlleyCat5

Quoted 133 lines · Chris Packham

Add support for the AlleyCat5 SoC. This lacks the mbus from the other users of the mvneta.c driver so a new compatible string is needed to allow for a different window configuration.

---

(no changes since v3)

Changes in v3:
- Remove unnecessary changes to RX descriptor handling
- Use dev_get_dma_range() to parse dma-ranges property from parent device.

 drivers/net/Kconfig  |  2 +-
 drivers/net/mvneta.c | 43 ++++++++++++++++++++++++++++++++++++++++++-
 2 files changed, 43 insertions(+), 2 deletions(-)
drivers/net/Kconfig +1 -1
index 6bbbadc5ee..8df3dce6df 100644
@@ -448,7 +448,7 @@ config MVGBE
 
 config MVNETA
        bool "Marvell Armada XP/385/3700 network interface support"
-       depends on ARMADA_XP || ARMADA_38X || ARMADA_3700
+       depends on ARMADA_XP || ARMADA_38X || ARMADA_3700 || ALLEYCAT_5
        select PHYLIB
        select DM_MDIO
        help
drivers/net/mvneta.c +42 -2
index d2c42c4396..0fbfad11d4 100644
@@ -91,6 +91,8 @@ DECLARE_GLOBAL_DATA_PTR;
 #define MVNETA_WIN_SIZE_MASK                   (0xffff0000)
 #define MVNETA_BASE_ADDR_ENABLE                 0x2290
 #define      MVNETA_BASE_ADDR_ENABLE_BIT       0x1
+#define      MVNETA_AC5_CNM_DDR_TARGET         0x2
+#define      MVNETA_AC5_CNM_DDR_ATTR           0xb
 #define MVNETA_PORT_ACCESS_PROTECT              0x2294
 #define      MVNETA_PORT_ACCESS_PROTECT_WIN0_RW        0x3
 #define MVNETA_PORT_CONFIG                      0x2400
@@ -282,6 +284,8 @@ struct mvneta_port {
        struct gpio_desc phy_reset_gpio;
        struct gpio_desc sfp_tx_disable_gpio;
 #endif
+
+       uintptr_t dma_base;     /* base address for DMA address decoding */
 };
 
 /* The mvneta_tx_desc and mvneta_rx_desc structures describe the
@@ -1343,6 +1347,29 @@ static void mvneta_conf_mbus_windows(struct mvneta_port *pp)
        mvreg_write(pp, MVNETA_BASE_ADDR_ENABLE, win_enable);
 }
 
+static void mvneta_conf_ac5_cnm_xbar_windows(struct mvneta_port *pp)
+{
+       int i;
+
+       /* Clear all windows */
+       for (i = 0; i < 6; i++) {
+               mvreg_write(pp, MVNETA_WIN_BASE(i), 0);
+               mvreg_write(pp, MVNETA_WIN_SIZE(i), 0);
+
+               if (i < 4)
+                       mvreg_write(pp, MVNETA_WIN_REMAP(i), 0);
+       }
+
+       /*
+        * Setup window #0 base 0x0 to target XBAR port 2 (AMB2), attribute 0xb, size 4GB
+        * AMB2 address decoder remaps 0x0 to DDR 64 bit base address
+        */
+       mvreg_write(pp, MVNETA_WIN_BASE(0),
+                   (MVNETA_AC5_CNM_DDR_ATTR << 8) | MVNETA_AC5_CNM_DDR_TARGET);
+       mvreg_write(pp, MVNETA_WIN_SIZE(0), 0xffff0000);
+       mvreg_write(pp, MVNETA_BASE_ADDR_ENABLE, 0x3e);
+}
+
 /* Power up the port */
 static int mvneta_port_power_up(struct mvneta_port *pp, int phy_mode)
 {
@@ -1525,7 +1552,7 @@ static int mvneta_recv(struct udevice *dev, int flags, uchar **packetp)
                 * No cache invalidation needed here, since the rx_buffer's are
                 * located in a uncached memory region
                 */
-               *packetp = data;
+               *packetp = data + pp->dma_base;
 
                /*
                 * Only mark one descriptor as free
@@ -1544,6 +1571,10 @@ static int mvneta_probe(struct udevice *dev)
        struct ofnode_phandle_args sfp_args;
 #endif
        void *bd_space;
+       phys_addr_t cpu;
+       dma_addr_t bus;
+       u64 size;
+       int ret;
 
        /*
         * Allocate buffer area for descs and rx_buffers. This is only
@@ -1577,9 +1608,18 @@ static int mvneta_probe(struct udevice *dev)
        /* Configure MBUS address windows */
        if (device_is_compatible(dev, "marvell,armada-3700-neta"))
                mvneta_bypass_mbus_windows(pp);
+       else if (device_is_compatible(dev, "marvell,armada-ac5-neta"))
+               mvneta_conf_ac5_cnm_xbar_windows(pp);
        else
                mvneta_conf_mbus_windows(pp);
 
+       /* fetch dma ranges property */
+       ret = dev_get_dma_range(dev, &cpu, &bus, &size);
+       if (!ret)
+               pp->dma_base = cpu;
+       else
+               pp->dma_base = 0;
+
 #if CONFIG_IS_ENABLED(DM_GPIO)
        if (!dev_read_phandle_with_args(dev, "sfp", NULL, 0, 0, &sfp_args) &&
            ofnode_is_enabled(sfp_args.node))
@@ -1620,6 +1660,7 @@ static const struct eth_ops mvneta_ops = {
 
 static const struct udevice_id mvneta_ids[] = {
        { .compatible = "marvell,armada-370-neta" },
+       { .compatible = "marvell,armada-ac5-neta" },
        { .compatible = "marvell,armada-xp-neta" },
        { .compatible = "marvell,armada-3700-neta" },
        { }
--
Quoted 2 lines

2.38.1

#5 lore raw

Re: [PATCH v6 2/6] net: mvneta: Add support for AlleyCat5

Hi Ramon,

Quoted 127 lines · Ramon Fried
Quoted 126 lines · Chris Packham

Add support for the AlleyCat5 SoC. This lacks the mbus from the other users of the mvneta.c driver so a new compatible string is needed to allow for a different window configuration.

---

(no changes since v3)

Changes in v3:
- Remove unnecessary changes to RX descriptor handling
- Use dev_get_dma_range() to parse dma-ranges property from parent device.

  drivers/net/Kconfig  |  2 +-
  drivers/net/mvneta.c | 43 ++++++++++++++++++++++++++++++++++++++++++-
  2 files changed, 43 insertions(+), 2 deletions(-)
drivers/net/Kconfig +1 -1
index 6bbbadc5ee..8df3dce6df 100644
@@ -448,7 +448,7 @@ config MVGBE
 
  config MVNETA
         bool "Marvell Armada XP/385/3700 network interface support"
-       depends on ARMADA_XP || ARMADA_38X || ARMADA_3700
+       depends on ARMADA_XP || ARMADA_38X || ARMADA_3700 || ALLEYCAT_5
         select PHYLIB
         select DM_MDIO
         help
drivers/net/mvneta.c +41 -1
index d2c42c4396..0fbfad11d4 100644
@@ -91,6 +91,8 @@ DECLARE_GLOBAL_DATA_PTR;
  #define MVNETA_WIN_SIZE_MASK                   (0xffff0000)
  #define MVNETA_BASE_ADDR_ENABLE                 0x2290
  #define      MVNETA_BASE_ADDR_ENABLE_BIT       0x1
+#define      MVNETA_AC5_CNM_DDR_TARGET         0x2
+#define      MVNETA_AC5_CNM_DDR_ATTR           0xb
  #define MVNETA_PORT_ACCESS_PROTECT              0x2294
  #define      MVNETA_PORT_ACCESS_PROTECT_WIN0_RW        0x3
  #define MVNETA_PORT_CONFIG                      0x2400
@@ -282,6 +284,8 @@ struct mvneta_port {
         struct gpio_desc phy_reset_gpio;
         struct gpio_desc sfp_tx_disable_gpio;
  #endif
+
+       uintptr_t dma_base;     /* base address for DMA address decoding */
  };
 
  /* The mvneta_tx_desc and mvneta_rx_desc structures describe the
@@ -1343,6 +1347,29 @@ static void mvneta_conf_mbus_windows(struct mvneta_port *pp)
         mvreg_write(pp, MVNETA_BASE_ADDR_ENABLE, win_enable);
  }
 
+static void mvneta_conf_ac5_cnm_xbar_windows(struct mvneta_port *pp)
+{
+       int i;
+
+       /* Clear all windows */
+       for (i = 0; i < 6; i++) {
+               mvreg_write(pp, MVNETA_WIN_BASE(i), 0);
+               mvreg_write(pp, MVNETA_WIN_SIZE(i), 0);
+
+               if (i < 4)
+                       mvreg_write(pp, MVNETA_WIN_REMAP(i), 0);
+       }
+
+       /*
+        * Setup window #0 base 0x0 to target XBAR port 2 (AMB2), attribute 0xb, size 4GB
+        * AMB2 address decoder remaps 0x0 to DDR 64 bit base address
+        */
+       mvreg_write(pp, MVNETA_WIN_BASE(0),
+                   (MVNETA_AC5_CNM_DDR_ATTR << 8) | MVNETA_AC5_CNM_DDR_TARGET);
+       mvreg_write(pp, MVNETA_WIN_SIZE(0), 0xffff0000);
+       mvreg_write(pp, MVNETA_BASE_ADDR_ENABLE, 0x3e);
+}
+
  /* Power up the port */
  static int mvneta_port_power_up(struct mvneta_port *pp, int phy_mode)
  {
@@ -1525,7 +1552,7 @@ static int mvneta_recv(struct udevice *dev, int flags, uchar **packetp)
                  * No cache invalidation needed here, since the rx_buffer's are
                  * located in a uncached memory region
                  */
-               *packetp = data;
+               *packetp = data + pp->dma_base;
 
                 /*
                  * Only mark one descriptor as free
@@ -1544,6 +1571,10 @@ static int mvneta_probe(struct udevice *dev)
         struct ofnode_phandle_args sfp_args;
  #endif
         void *bd_space;
+       phys_addr_t cpu;
+       dma_addr_t bus;
+       u64 size;
+       int ret;
 
         /*
          * Allocate buffer area for descs and rx_buffers. This is only
@@ -1577,9 +1608,18 @@ static int mvneta_probe(struct udevice *dev)
         /* Configure MBUS address windows */
         if (device_is_compatible(dev, "marvell,armada-3700-neta"))
                 mvneta_bypass_mbus_windows(pp);
+       else if (device_is_compatible(dev, "marvell,armada-ac5-neta"))
+               mvneta_conf_ac5_cnm_xbar_windows(pp);
         else
                 mvneta_conf_mbus_windows(pp);
 
+       /* fetch dma ranges property */
+       ret = dev_get_dma_range(dev, &cpu, &bus, &size);
+       if (!ret)
+               pp->dma_base = cpu;
+       else
+               pp->dma_base = 0;
+
  #if CONFIG_IS_ENABLED(DM_GPIO)
         if (!dev_read_phandle_with_args(dev, "sfp", NULL, 0, 0, &sfp_args) &&
             ofnode_is_enabled(sfp_args.node))
@@ -1620,6 +1660,7 @@ static const struct eth_ops mvneta_ops = {
 
Quoted 10 lines
Quoted 9 lines
drivers/net/mvneta.c +1 -1
  static const struct udevice_id mvneta_ids[] = {
         { .compatible = "marvell,armada-370-neta" },
+       { .compatible = "marvell,armada-ac5-neta" },
         { .compatible = "marvell,armada-xp-neta" },
         { .compatible = "marvell,armada-3700-neta" },
         { }
--

2.38.1

Thanks. But sorry, I already applied this patch via the marvell tree. I hope this okay. I will try to wait a bit longer next time for networks related patches.

Thanks,
Stefan

#6 lore raw

PATCH v6 3/6 usb: ehci: ehci-marvell: Support for marvell,ac5-ehci

In reply to Chris Packham

Unlike the other 64-bit mvebu SoCs the AlleyCat5 uses the older ehci block from the 32-bit SoCs. Adapt the ehci-marvell.c driver to cope with the fact that the ac5 does not have the mbus infrastructure the 32-bit SoCs have and ensure USB_EHCI_IS_TDI is selected.

---

(no changes since v5)

Changes in v5:
- Minor white space cleanups
- Collect review from Stefan

 drivers/usb/host/Kconfig        |  1 +
 drivers/usb/host/ehci-marvell.c | 53 ++++++++++++++++++++++++++++-----
 2 files changed, 46 insertions(+), 8 deletions(-)
drivers/usb/host/Kconfig +1 -0
index 1aabe062fb..c750b0207d 100644
@@ -178,6 +178,7 @@ config USB_EHCI_MARVELL
 	depends on ARCH_MVEBU || ARCH_KIRKWOOD || ARCH_ORION5X
 	default y
 	select USB_EHCI_IS_TDI if !ARM64
+	select USB_EHCI_IS_TDI if ALLEYCAT_5
 	---help---
 	  Enables support for the on-chip EHCI controller on MVEBU SoCs.
 
drivers/usb/host/ehci-marvell.c +45 -8

92 lines not on this page · raw message

Signature · 1 line
2.38.1
#7 lore raw

PATCH v6 4/6 pinctrl: mvebu: Add AlleyCat5 support

In reply to Chris Packham

This uses the same IP block as the Armada-8K SoCs.

---

(no changes since v4)

Changes in v4:
- Collect r-by from Stefan

 drivers/pinctrl/mvebu/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/pinctrl/mvebu/Kconfig +1 -1
index 574fb4dfb0..7c51d138c8 100644
@@ -15,7 +15,7 @@ config PINCTRL_ARMADA_37XX
 	   Marvell's Armada-37xx SoC.
 
 config PINCTRL_ARMADA_8K
-	depends on ARMADA_8K && PINCTRL_FULL
+	depends on (ARMADA_8K || ALLEYCAT_5) && PINCTRL_FULL
 	bool "Armada 7k/8k pin control driver"
 	help
 	   Support pin multiplexing and pin configuration control on
Signature · 1 line
2.38.1
#8 lore raw

PATCH v6 5/6 arm: mvebu: Support for 98DX25xx/98DX35xx SoC

In reply to Chris Packham

Add support for the Allecat5/Alleycat5X SoC. These are L3 switches with an integrated CPU (referred to as the CnM block in Marvell's documentation). These have dual ARMv8.2 CPUs (Cortex-A55). This support has been ported from Marvell's SDK which is based on a much older version of U-Boot.

---

(no changes since v5)

Changes in v5:
- Minor fixup for checkpatch.pl complaint

Changes in v4:
- Remove unused mvebu_get_nand_clock() (will return in a later series)
- Remove unnecessary #ifdefs
- Misc style cleanups
- Replace CONFIG_MVEBU_SAR with simpler code implemented directly in soc.c based around get_sar_freq which the 32-bit platforms already use.

Changes in v3:
- Remove unnecessary dma-ranges property from ethernet nodes (mvneta now correctly parses the property from the parent node).
- Keep soc_print_clock_info and soc_print_device_info local to alleycat5.

 arch/arm/dts/ac5-98dx25xx.dtsi         | 277 +++++++++++++++++++++++
 arch/arm/dts/ac5-98dx35xx.dtsi         |  17 ++
 arch/arm/mach-mvebu/Kconfig            |   4 +
 arch/arm/mach-mvebu/Makefile           |   1 +
 arch/arm/mach-mvebu/alleycat5/Makefile |   8 +
 arch/arm/mach-mvebu/alleycat5/cpu.c    | 124 ++++++++++
 arch/arm/mach-mvebu/alleycat5/soc.c    | 298 +++++++++++++++++++++++++
 arch/arm/mach-mvebu/alleycat5/soc.h    |   7 +
 arch/arm/mach-mvebu/arm64-common.c     |   5 +
 arch/arm/mach-mvebu/include/mach/cpu.h |   4 +
 10 files changed, 745 insertions(+)
 create mode 100644 arch/arm/dts/ac5-98dx25xx.dtsi
 create mode 100644 arch/arm/dts/ac5-98dx35xx.dtsi
 create mode 100644 arch/arm/mach-mvebu/alleycat5/Makefile
 create mode 100644 arch/arm/mach-mvebu/alleycat5/cpu.c
 create mode 100644 arch/arm/mach-mvebu/alleycat5/soc.c
 create mode 100644 arch/arm/mach-mvebu/alleycat5/soc.h
arch/arm/dts/ac5-98dx25xx.dtsi new file +277 -0
new file mode 100644
index 0000000000..3c68355f32
@@ -0,0 +1,277 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree For AC5.
+ *
+ * Copyright (C) 2021 Marvell
+ * Copyright (C) 2022 Allied Telesis Labs
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Marvell AC5 SoC";
+	compatible = "marvell,ac5";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 12 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		dma-ranges;
+
+		internal-regs@7f000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			/* 16M internal register @ 0x7f00_0000 */
+			ranges = <0x0 0x0 0x7f000000 0x1000000>;
+			dma-coherent;
+
+			uart0: serial@12000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12000 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&cnm_clock>;
+				status = "okay";
+			};
+
+			uart1: serial@12100 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12100 0x100>;
+				reg-shift = <2>;
+				reg-io-width = <1>;
+				clocks = <&cnm_clock>;
+				status = "disabled";
+			};
+
+			uart2: serial@12200 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12200 0x100>;
+				reg-shift = <2>;
+				reg-io-width = <1>;
+				clocks = <&cnm_clock>;
+				status = "disabled";
+			};
+
+			uart3: serial@12300 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12300 0x100>;
+				reg-shift = <2>;
+				reg-io-width = <1>;
+				clocks = <&cnm_clock>;
+				status = "disabled";
+			};
+
+			mdio: mdio@22004 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "marvell,orion-mdio";
+				reg = <0x22004 0x4>;
+				clocks = <&cnm_clock>;
+			};
+
+			i2c0: i2c@11000 {
+				compatible = "marvell,mv78230-i2c";
+				reg = <0x11000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				clocks = <&cnm_clock>;
+				clock-names = "core";
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency=<100000>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@11100 {
+				compatible = "marvell,mv78230-i2c";
+				reg = <0x11100 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				clocks = <&cnm_clock>;
+				clock-names = "core";
+				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency=<100000>;
+				status = "disabled";
+			};
+
+			gpio0: gpio@18100 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18100 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				status = "okay";
+			};
+
+			gpio1: gpio@18140 {
+				reg = <0x18140 0x40>;
+				compatible = "marvell,orion-gpio";
+				ngpios = <14>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				status = "okay";
+			};
+		};
+
+		/*
+		 * Dedicated section for devices behind 32bit controllers so we
+		 * can configure specific DMA mapping for them
+		 */
+		behind-32bit-controller@7f000000 {
+			compatible = "simple-bus";
+			#address-cells = <0x2>;
+			#size-cells = <0x2>;
+			ranges = <0x0 0x0 0x0 0x7f000000 0x0 0x1000000>;
+			/* Host phy ram starts at 0x200M */
+			dma-ranges = <0x0 0x0 0x2 0x0 0x1 0x0>;
+			dma-coherent;
+
+			eth0: ethernet@20000 {
+				compatible = "marvell,armada-ac5-neta";
+				reg = <0x0 0x20000 0x0 0x4000>;
+				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cnm_clock>;
+				phy-mode = "sgmii";
+				status = "disabled";
+			};
+
+			eth1: ethernet@24000 {
+				compatible = "marvell,armada-ac5-neta";
+				reg = <0x0 0x24000 0x0 0x4000>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cnm_clock>;
+				phy-mode = "sgmii";
+				status = "disabled";
+			};
+
+			usb0: usb@80000 {
+				compatible = "marvell,ac5-ehci";
+				reg = <0x0 0x80000 0x0 0x500>;
+				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			usb1: usb@a0000 {
+				compatible = "marvell,ac5-ehci";
+				reg = <0x0 0xa0000 0x0 0x500>;
+				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		pinctrl0: pinctrl@80020100 {
+			compatible = "marvell,mvebu-pinctrl";
+			reg = <0 0x80020100 0 0x20>;
+			pin-count = <46>;
+			max-func = <0xf>;
+			status = "okay";
+		};
+
+		spi0: spi@805a0000 {
+			compatible = "marvell,armada-3700-spi";
+			reg = <0x0 0x805a0000 0x0 0x50>;
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			clocks = <&spi_clock>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			num-cs = <1>;
+			status = "disabled";
+		};
+
+		spi1: spi@805a8000 {
+			compatible = "marvell,armada-3700-spi";
+			reg = <0x0 0x805a8000 0x0 0x50>;
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			clocks = <&spi_clock>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			num-cs = <1>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@80600000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x0 0x80600000 0x0 0x10000>, /* GICD */
+			      <0x0 0x80660000 0x0 0x40000>; /* GICR */
+			interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	clocks {
+		cnm_clock: cnm-clock {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <328000000>;
+		};
+
+		spi_clock: spi-clock {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+};
arch/arm/dts/ac5-98dx35xx.dtsi new file +17 -0
new file mode 100644
index 0000000000..2ab72f854b
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree For AC5X.
+ *
+ * Copyright (C) 2022 Allied Telesis Labs
+ */
+
+#include "ac5-98dx25xx.dtsi"
+
+/ {
+	model = "Marvell AC5X SoC";
+	compatible = "marvell,ac5x", "marvell,ac5";
+};
+
+&cnm_clock {
+	clock-frequency = <325000000>;
+};
arch/arm/mach-mvebu/Kconfig +4 -0
index fe6b785d0b..e2c98dffe2 100644
@@ -50,6 +50,10 @@ config ARMADA_8K
 	bool
 	select ARM64
 
+config ALLEYCAT_5
+	bool
+	select ARM64
+
 # Armada PLL frequency (used for NAND clock generation)
 config SYS_MVEBU_PLL_CLOCK
 	int
arch/arm/mach-mvebu/Makefile +1 -0
index 406a9ee8f6..a23511b113 100644
@@ -6,6 +6,7 @@ ifdef CONFIG_ARM64
 
 obj-$(CONFIG_ARMADA_3700) += armada3700/
 obj-$(CONFIG_ARMADA_8K) += armada8k/
+obj-$(CONFIG_ALLEYCAT_5) += alleycat5/
 obj-y += arm64-common.o
 
 else # CONFIG_ARM64
arch/arm/mach-mvebu/alleycat5/Makefile new file +8 -0
new file mode 100644
index 0000000000..b897ad089a
@@ -0,0 +1,8 @@
+#
+# Copyright (C) 2016 Stefan Roese <[email protected]>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y = cpu.o
+obj-y += soc.o
arch/arm/mach-mvebu/alleycat5/cpu.c new file +124 -0

124 lines not on this page · raw message

arch/arm/mach-mvebu/alleycat5/soc.c new file +298 -0

298 lines not on this page · raw message

arch/arm/mach-mvebu/alleycat5/soc.h new file +7 -0
new file mode 100644
index 0000000000..97663d2c01
@@ -0,0 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef _ALLEYCAT5_SOC_H
+#define _ALLEYCAT5_SOC_H
+void soc_print_device_info(void);
+void soc_print_clock_info(void);
+#endif /* _ALLEYCAT5_SOC_H */
arch/arm/mach-mvebu/arm64-common.c +5 -0
index 63f6af5fe8..e3098a7ca8 100644
@@ -53,6 +53,8 @@ __weak int dram_init_banksize(void)
 		return a8k_dram_init_banksize();
 	else if (CONFIG_IS_ENABLED(ARMADA_3700))
 		return a3700_dram_init_banksize();
+	else if (CONFIG_IS_ENABLED(ALLEYCAT_5))
+		return alleycat5_dram_init_banksize();
 	else
 		return fdtdec_setup_memory_banksize();
 }
@@ -68,6 +70,9 @@ __weak int dram_init(void)
 	if (CONFIG_IS_ENABLED(ARMADA_3700))
 		return a3700_dram_init();
 
+	if (CONFIG_IS_ENABLED(ALLEYCAT_5))
+		return alleycat5_dram_init();
+
 	if (fdtdec_setup_mem_size_base() != 0)
 		return -EINVAL;
 
arch/arm/mach-mvebu/include/mach/cpu.h +4 -0
index b127fce865..c17c2440f1 100644
@@ -174,6 +174,10 @@ int a3700_dram_init_banksize(void);
 /* A3700 PCIe regions fixer for device tree */
 int a3700_fdt_fix_pcie_regions(void *blob);
 
+/* Alleycat5 dram functions */
+int alleycat5_dram_init(void);
+int alleycat5_dram_init_banksize(void);
+
 /*
  * get_ref_clk
  *
Signature · 1 line
2.38.1
#9 lore raw

PATCH v6 6/6 arm: mvebu: Add RD-AC5X board

In reply to Chris Packham

The RD-AC5X-32G16HVG6HLG-A0 development board main components and features include:
* Main 12V/54V power supply
* 270 Gbps throughput packet processor on the main board
* DDR4:
* SR1: 2GB DDR4 2400MT/S(1GB x 2 pcs ) with ECC(1GB x 1 pcs)
* SR2: 4GB DDR4 2400MT/S(2GB x 2 pcs ) with ECC(2GB x 1 pcs)
* PCB co-layout with 4GB device to support 8GB (Dual CS) requirement
* 16GB eMMC (Samsung KLMAG1JETD-B041006)
* 16MB SPI NOR(GD25Q127C)
* 32 x 1000 Base-T interfaces
* 16 x 2500 Base-T interfaces
* SR1: 88E2540*4
* SR2: 88E2580*1+88E2540*2
* Six (6) x 25G Base-R SFP28 interfaces
* One (1) x RJ-45 console connector, interfacing to the on board UART
* One (1) x USB Type-A connector, interfacing to the USB 2.0 port (0)
* One (1) x USB Type-mini B connector, interfacing to the USB 2.0 port (1)
* One (1) x RJ-45 1G Base-T Management port, interfacing to the host port (shared with PCIe) Connected to 88E1512 Gigabit Ethernet Phy
* One (1) x Oculink port, interfacing to the PCIe port for external CPU connection
* POE 802.3AT support on Port 1 ~ Port 32, 802.3BT support on Port 33 ~ Port 48 (Microsemi PD69208T4, PD69208M or TI TPS2388,TPS23881 solution)
* POE total power budget 780W
* LED interfaces per network port/POE
* LED interfaces (common) showing system status
* PTP TC mode Supported (Reserved M.2 connector to support BC mode)

---

Changes in v6:
- Set CONFIG_DEFAULT_DEVICE_TREE and CONFIG_TEXT_BASE

Changes in v5:
- Remove unused bpard_{early,late}_init{,_r,_f} functions
- Remove CPNFIG_PCI and CONFIG_E1000 as the PCI interface is not currently working (requires more vendor code)
- Use CONFIG_OF_SEPARATE instead of CONFIG_OF_EMBED

Changes in v4:
- Move CONFIG_DISPLAY_BOARDINFO_LATE and CONFIG_ENV_OVERWRITE to the defconfig.
- Remove CONFIG_BAUDRATE as this is already set in the default config
- Remove CONFIG_USB_MAX_CONTROLLER_COUNT as this is not needed with DM_USB
- Remove CONFIG_PREBOOT as we don't have anything to run
- Remove commented out CONFIG_BOARD_EARLY_INIT_R
- Remove DEBUG_UART configuration
- Remove unnecessary console environment variable
- Remove CONFIG_MVEBU_SAR

Changes in v3:
- Remove MMC and UBIFS distroboot options (MMC driver is not currently functional, NAND is not populated on the RD-AC5X board)
- Remove unnecessary Ethernet configuration
- Remove unnecessary NAND configuration
- Remove memory node from dts so the value passed by the DDR FW will be used

Changes in v2:
- Use distro boot by default
- remove unnecessary SPI-NOR partitions

 arch/arm/dts/Makefile                      |   3 +-
 arch/arm/dts/ac5-98dx35xx-rd.dts           | 129 +++++++++++++++++++++
 arch/arm/mach-mvebu/Kconfig                |   9 +-
 board/Marvell/mvebu_alleycat-5/MAINTAINERS |   6 +
 board/Marvell/mvebu_alleycat-5/Makefile    |   3 +
 board/Marvell/mvebu_alleycat-5/board.c     |  13 +++
 configs/mvebu_ac5_rd_defconfig             |  81 +++++++++++++
 include/configs/mvebu_alleycat-5.h         |  42 +++++++
 8 files changed, 284 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/dts/ac5-98dx35xx-rd.dts
 create mode 100644 board/Marvell/mvebu_alleycat-5/MAINTAINERS
 create mode 100644 board/Marvell/mvebu_alleycat-5/Makefile
 create mode 100644 board/Marvell/mvebu_alleycat-5/board.c
 create mode 100644 configs/mvebu_ac5_rd_defconfig
 create mode 100644 include/configs/mvebu_alleycat-5.h
arch/arm/dts/Makefile +2 -1
index 791838733c..b52077cddc 100644
@@ -278,7 +278,8 @@ dtb-$(CONFIG_ARCH_MVEBU) +=			\
 	cn9132-db-A.dtb				\
 	cn9132-db-B.dtb				\
 	cn9130-crb-A.dtb			\
-	cn9130-crb-B.dtb
+	cn9130-crb-B.dtb			\
+	ac5-98dx35xx-rd.dtb
 endif
 
 dtb-$(CONFIG_ARCH_SYNQUACER) += synquacer-sc2a11-developerbox.dtb
arch/arm/dts/ac5-98dx35xx-rd.dts new file +129 -0

129 lines not on this page · raw message

arch/arm/mach-mvebu/Kconfig +8 -1
index e2c98dffe2..594e9a03d9 100644
@@ -98,7 +98,7 @@ config CUSTOMER_BOARD_SUPPORT
 	bool
 
 choice
-	prompt "Armada XP/375/38x/3700/7K/8K board select"
+	prompt "Armada XP/375/38x/3700/7K/8K/Alleycat-5 board select"
 	optional
 
 config TARGET_CLEARFOG
@@ -150,6 +150,10 @@ config TARGET_MVEBU_ARMADA_8K
 	select BOARD_LATE_INIT
 	imply SCSI
 
+config TARGET_MVEBU_ALLEYCAT5
+	bool "Support AlleyCat 5 platforms"
+	select ALLEYCAT_5
+
 config TARGET_OCTEONTX2_CN913x
 	bool "Support CN913x platforms"
 	select ARMADA_8K
@@ -258,6 +262,7 @@ config SYS_BOARD
 	default "x530" if TARGET_X530
 	default "db-xc3-24g4xg" if TARGET_DB_XC3_24G4XG
 	default "crs3xx-98dx3236" if TARGET_CRS3XX_98DX3236
+	default "mvebu_alleycat-5" if TARGET_MVEBU_ALLEYCAT5
 
 config SYS_CONFIG_NAME
 	default "clearfog" if TARGET_CLEARFOG
@@ -278,6 +283,7 @@ config SYS_CONFIG_NAME
 	default "x530" if TARGET_X530
 	default "db-xc3-24g4xg" if TARGET_DB_XC3_24G4XG
 	default "crs3xx-98dx3236" if TARGET_CRS3XX_98DX3236
+	default "mvebu_alleycat-5" if TARGET_MVEBU_ALLEYCAT5
 
 config SYS_VENDOR
 	default "Marvell" if TARGET_DB_MV784MP_GP
@@ -297,6 +303,7 @@ config SYS_VENDOR
 	default "gdsys" if TARGET_CONTROLCENTERDC
 	default "alliedtelesis" if TARGET_X530
 	default "mikrotik" if TARGET_CRS3XX_98DX3236
+	default "Marvell" if TARGET_MVEBU_ALLEYCAT5
 
 config SYS_SOC
 	default "mvebu"
board/Marvell/mvebu_alleycat-5/MAINTAINERS new file +6 -0
new file mode 100644
index 0000000000..480c07c5f0
@@ -0,0 +1,6 @@
+RD-AC5X BOARD
+M:	Chris Packham <[email protected]>
+S:	Maintained
+F:	board/Marvell/mvebu_alleycat-5/
+F:	include/configs/mvebu_alleycat-5.h
+F:	configs/mvebu_ac5_rd_defconfig
board/Marvell/mvebu_alleycat-5/Makefile new file +3 -0
new file mode 100644
index 0000000000..29254b4d64
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier:	GPL-2.0+
+
+obj-y	:= board.o
board/Marvell/mvebu_alleycat-5/board.c new file +13 -0
new file mode 100644
index 0000000000..619cd6c6cd
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <common.h>
+#include <asm/global_data.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_init(void)
+{
+	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+	return 0;
+}
configs/mvebu_ac5_rd_defconfig new file +81 -0

81 lines not on this page · raw message

include/configs/mvebu_alleycat-5.h new file +42 -0

42 lines not on this page · raw message

Signature · 1 line
2.38.1
#10 lore raw
In reply to Chris Packham
Quoted 89 lines · Chris Packham

These patches are based on Marvell's bootloader for the AlleyCat5/5X which was based on u-boot 2018.03. I've split that code into consumable chunks and dropped as much unnecessary stuff as I can. I've also tried to sync the device trees as much as possible with the support that will land in Linux 6.0 although there are still some differences

Changes in v6:
- Set CONFIG_DEFAULT_DEVICE_TREE and CONFIG_TEXT_BASE

Changes in v5:
- Minor white space cleanups
- Collect review from Stefan
- Minor fixup for checkpatch.pl complaint
- Remove unused bpard_{early,late}_init{,_r,_f} functions
- Remove CPNFIG_PCI and CONFIG_E1000 as the PCI interface is not currently working (requires more vendor code)
- Use CONFIG_OF_SEPARATE instead of CONFIG_OF_EMBED

Changes in v4:
- Collect r-by from Stefan
- Remove unused mvebu_get_nand_clock() (will return in a later series)
- Remove unnecessary #ifdefs
- Misc style cleanups
- Replace CONFIG_MVEBU_SAR with simpler code implemented directly in soc.c based around get_sar_freq which the 32-bit platforms already use.
- Move CONFIG_DISPLAY_BOARDINFO_LATE and CONFIG_ENV_OVERWRITE to the defconfig.
- Remove CONFIG_BAUDRATE as this is already set in the default config
- Remove CONFIG_USB_MAX_CONTROLLER_COUNT as this is not needed with DM_USB
- Remove CONFIG_PREBOOT as we don't have anything to run
- Remove commented out CONFIG_BOARD_EARLY_INIT_R
- Remove DEBUG_UART configuration
- Remove unnecessary console environment variable
- Remove CONFIG_MVEBU_SAR

Changes in v3:
- Remove unnecessary changes to RX descriptor handling
- Use dev_get_dma_range() to parse dma-ranges property from parent device.
- Remove unnecessary dma-ranges property from ethernet nodes (mvneta now correctly parses the property from the parent node).
- Keep soc_print_clock_info and soc_print_device_info local to alleycat5.
- Remove MMC and UBIFS distroboot options (MMC driver is not currently functional, NAND is not populated on the RD-AC5X board)
- Remove unnecessary Ethernet configuration
- Remove unnecessary NAND configuration
- Remove memory node from dts so the value passed by the DDR FW will be used

Changes in v2:
- Use distro boot by default
- remove unnecessary SPI-NOR partitions

Chris Packham (6):
arm: mvebu: Don't use CONFIG_TIMER on ARM64
net: mvneta: Add support for AlleyCat5
usb: ehci: ehci-marvell: Support for marvell,ac5-ehci
pinctrl: mvebu: Add AlleyCat5 support
arm: mvebu: Support for 98DX25xx/98DX35xx SoC
arm: mvebu: Add RD-AC5X board

  arch/arm/Kconfig                           |   2 +-
  arch/arm/dts/Makefile                      |   3 +-
  arch/arm/dts/ac5-98dx25xx.dtsi             | 277 +++++++++++++++++++
  arch/arm/dts/ac5-98dx35xx-rd.dts           | 129 +++++++++
  arch/arm/dts/ac5-98dx35xx.dtsi             |  17 ++
  arch/arm/mach-mvebu/Kconfig                |  13 +-
  arch/arm/mach-mvebu/Makefile               |   1 +
  arch/arm/mach-mvebu/alleycat5/Makefile     |   8 +
  arch/arm/mach-mvebu/alleycat5/cpu.c        | 124 +++++++++
  arch/arm/mach-mvebu/alleycat5/soc.c        | 298 +++++++++++++++++++++
  arch/arm/mach-mvebu/alleycat5/soc.h        |   7 +
  arch/arm/mach-mvebu/arm64-common.c         |   5 +
  arch/arm/mach-mvebu/include/mach/cpu.h     |   4 +
  board/Marvell/mvebu_alleycat-5/MAINTAINERS |   6 +
  board/Marvell/mvebu_alleycat-5/Makefile    |   3 +
  board/Marvell/mvebu_alleycat-5/board.c     |  13 +
  configs/mvebu_ac5_rd_defconfig             |  81 ++++++
  drivers/net/Kconfig                        |   2 +-
  drivers/net/mvneta.c                       |  43 ++-
  drivers/pinctrl/mvebu/Kconfig              |   2 +-
  drivers/usb/host/Kconfig                   |   1 +
  drivers/usb/host/ehci-marvell.c            |  53 +++-
  include/configs/mvebu_alleycat-5.h         |  42 +++
  23 files changed, 1120 insertions(+), 14 deletions(-)
Quoted 13 lines

create mode 100644 arch/arm/dts/ac5-98dx25xx.dtsi create mode 100644 arch/arm/dts/ac5-98dx35xx-rd.dts create mode 100644 arch/arm/dts/ac5-98dx35xx.dtsi create mode 100644 arch/arm/mach-mvebu/alleycat5/Makefile create mode 100644 arch/arm/mach-mvebu/alleycat5/cpu.c create mode 100644 arch/arm/mach-mvebu/alleycat5/soc.c create mode 100644 arch/arm/mach-mvebu/alleycat5/soc.h create mode 100644 board/Marvell/mvebu_alleycat-5/MAINTAINERS create mode 100644 board/Marvell/mvebu_alleycat-5/Makefile create mode 100644 board/Marvell/mvebu_alleycat-5/board.c create mode 100644 configs/mvebu_ac5_rd_defconfig create mode 100644 include/configs/mvebu_alleycat-5.h

Applied to u-boot-marvell/master

Thanks,
Stefan