Skip to content

arm: mvebu: Support for 98DX25xx/98DX35xx (AlleyCat5)

Chris Packham u-boot 6 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v6 Latest6 patches 4 repliesIn review
  2. v55 patches 0 repliesSuperseded
  3. v45 patches 9 repliesSuperseded
Earlier versions · 3
VersionPostedPatchesRepliesStatus
v36 patches12 repliesSuperseded
v26 patches10 repliesSuperseded
v17 patches9 repliesSuperseded

Changes in v6 from the cover letter

- Set CONFIG_DEFAULT_DEVICE_TREE and CONFIG_TEXT_BASE

Patches in v6 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/6arm: mvebu: Don't use CONFIG_TIMER on ARM64arch/arm/Kconfig+1 -11 reply
2/6net: mvneta: Add support for AlleyCat5drivers/net/Kconfig drivers/net/mvneta.c+43 -22 replies
3/6usb: ehci: ehci-marvell: Support for marvell,ac5-ehcidrivers/usb/host/Kconfig drivers/usb/host/ehci-marvell.c+46 -80 replies
4/6pinctrl: mvebu: Add AlleyCat5 supportdrivers/pinctrl/mvebu/Kconfig+1 -10 replies
5/6arm: mvebu: Support for 98DX25xx/98DX35xx SoCarch/arm/dts/ac5-98dx25xx.dtsi arch/arm/dts/ac5-98dx35xx.dtsi arch/arm/mach-mvebu/Kconfig +7 more+745 -00 replies
6/6arm: mvebu: Add RD-AC5X boardarch/arm/dts/Makefile arch/arm/dts/ac5-98dx35xx-rd.dts arch/arm/mach-mvebu/Kconfig +5 more+284 -20 replies

Reviews trailers per patch

4 of 6 patches have a Reviewed-by or Acked-by.

PatchStefan RoeseRamon Fried
1/6R-b
2/6R-b R-b
3/6R-b
4/6R-b
5/6
6/6

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v6 thread

Cover letter [PATCH v6 0/6] arm: mvebu: Support for 98DX25xx/98DX35xx (AlleyCat5)

These patches are based on Marvell's bootloader for the AlleyCat5/5X which was based on u-boot 2018.03. I've split that code into consumable chunks and dropped as much unnecessary stuff as I can. I've also tried to sync the device trees as much as possible with the support that will land in Linux 6.0 although there are still some differences

Changes in v6:
- Set CONFIG_DEFAULT_DEVICE_TREE and CONFIG_TEXT_BASE

Changes in v5:
- Minor white space cleanups
- Collect review from Stefan
- Minor fixup for checkpatch.pl complaint
- Remove unused bpard_{early,late}_init{,_r,_f} functions
- Remove CPNFIG_PCI and CONFIG_E1000 as the PCI interface is not currently working (requires more vendor code)
- Use CONFIG_OF_SEPARATE instead of CONFIG_OF_EMBED

Changes in v4:
- Collect r-by from Stefan
- Remove unused mvebu_get_nand_clock() (will return in a later series)
- Remove unnecessary #ifdefs
- Misc style cleanups
- Replace CONFIG_MVEBU_SAR with simpler code implemented directly in soc.c based around get_sar_freq which the 32-bit platforms already use.
- Move CONFIG_DISPLAY_BOARDINFO_LATE and CONFIG_ENV_OVERWRITE to the defconfig.
- Remove CONFIG_BAUDRATE as this is already set in the default config
- Remove CONFIG_USB_MAX_CONTROLLER_COUNT as this is not needed with DM_USB
- Remove CONFIG_PREBOOT as we don't have anything to run
- Remove commented out CONFIG_BOARD_EARLY_INIT_R
- Remove DEBUG_UART configuration
- Remove unnecessary console environment variable
- Remove CONFIG_MVEBU_SAR

Changes in v3:
- Remove unnecessary changes to RX descriptor handling
- Use dev_get_dma_range() to parse dma-ranges property from parent device.
- Remove unnecessary dma-ranges property from ethernet nodes (mvneta now correctly parses the property from the parent node).
- Keep soc_print_clock_info and soc_print_device_info local to alleycat5.
- Remove MMC and UBIFS distroboot options (MMC driver is not currently functional, NAND is not populated on the RD-AC5X board)
- Remove unnecessary Ethernet configuration
- Remove unnecessary NAND configuration
- Remove memory node from dts so the value passed by the DDR FW will be used

Changes in v2:
- Use distro boot by default
- remove unnecessary SPI-NOR partitions

Chris Packham (6):
arm: mvebu: Don't use CONFIG_TIMER on ARM64
net: mvneta: Add support for AlleyCat5
usb: ehci: ehci-marvell: Support for marvell,ac5-ehci
pinctrl: mvebu: Add AlleyCat5 support
arm: mvebu: Support for 98DX25xx/98DX35xx SoC
arm: mvebu: Add RD-AC5X board

 arch/arm/Kconfig                           |   2 +-
 arch/arm/dts/Makefile                      |   3 +-
 arch/arm/dts/ac5-98dx25xx.dtsi             | 277 +++++++++++++++++++
 arch/arm/dts/ac5-98dx35xx-rd.dts           | 129 +++++++++
 arch/arm/dts/ac5-98dx35xx.dtsi             |  17 ++
 arch/arm/mach-mvebu/Kconfig                |  13 +-
 arch/arm/mach-mvebu/Makefile               |   1 +
 arch/arm/mach-mvebu/alleycat5/Makefile     |   8 +
 arch/arm/mach-mvebu/alleycat5/cpu.c        | 124 +++++++++
 arch/arm/mach-mvebu/alleycat5/soc.c        | 298 +++++++++++++++++++++
 arch/arm/mach-mvebu/alleycat5/soc.h        |   7 +
 arch/arm/mach-mvebu/arm64-common.c         |   5 +
 arch/arm/mach-mvebu/include/mach/cpu.h     |   4 +
 board/Marvell/mvebu_alleycat-5/MAINTAINERS |   6 +
 board/Marvell/mvebu_alleycat-5/Makefile    |   3 +
 board/Marvell/mvebu_alleycat-5/board.c     |  13 +
 configs/mvebu_ac5_rd_defconfig             |  81 ++++++
 drivers/net/Kconfig                        |   2 +-
 drivers/net/mvneta.c                       |  43 ++-
 drivers/pinctrl/mvebu/Kconfig              |   2 +-
 drivers/usb/host/Kconfig                   |   1 +
 drivers/usb/host/ehci-marvell.c            |  53 +++-
 include/configs/mvebu_alleycat-5.h         |  42 +++
 23 files changed, 1120 insertions(+), 14 deletions(-)
 create mode 100644 arch/arm/dts/ac5-98dx25xx.dtsi
 create mode 100644 arch/arm/dts/ac5-98dx35xx-rd.dts
 create mode 100644 arch/arm/dts/ac5-98dx35xx.dtsi
 create mode 100644 arch/arm/mach-mvebu/alleycat5/Makefile
 create mode 100644 arch/arm/mach-mvebu/alleycat5/cpu.c
 create mode 100644 arch/arm/mach-mvebu/alleycat5/soc.c
 create mode 100644 arch/arm/mach-mvebu/alleycat5/soc.h
 create mode 100644 board/Marvell/mvebu_alleycat-5/MAINTAINERS
 create mode 100644 board/Marvell/mvebu_alleycat-5/Makefile
 create mode 100644 board/Marvell/mvebu_alleycat-5/board.c
 create mode 100644 configs/mvebu_ac5_rd_defconfig
 create mode 100644 include/configs/mvebu_alleycat-5.h
Signature · 1 line
2.38.1