arm: dts: imx: sync device trees with upstream linux kernel part 1
Subsystems (8)
v5 cover arm: dts: imx: sync device trees with upstream linux kernel part 1
From: Marcel Ziswiler <[email protected]>
This series synchronises them imx device trees with the upstream Linux kernel (v6.1-rc3). I split it into two parts. This is part 1.
It also fixes a few issues as discussed during/after the pre-mature application of my first series [1].
I am not touching kontron-sl-mx6ul as Frieder already took care of those [2].
Feedback welcome. Thanks!
[1] https://patchwork.ozlabs.org/project/uboot/cover/[email protected]/
[2] https://patchwork.ozlabs.org/project/uboot/cover/[email protected]/
Changes in v5:
- Add Giulio's reviewed-by and tested-by. Thanks!
- Add clock-names "per" to lpuart and re-add lcdif and usb* nodes as pointed out by Giulio.
- Add Tim's tested-by. Thanks!
Changes in v4:
- Re-synched with v6.1-rc3 which now already contains the recent DDR pinmux addition.
- Re-named commit subject and re-worded commit message to indicate migration to automatic build system included -u-boot.dtsi device tree include files. Thanks to Giulio for pointing this out.
- Use imxrt1050-evk-u-boot.dtsi as provided/tested by Jesse.
- Explain intent in commit message as pointed out by Giulio.
- Re-synched with v6.1-rc3.
- Re-based after Adam's common imx8mn-u-boot device tree creation.
Changes in v3:
- Incorporate feedback from Jesse.
Changes in v2:
- imxrt1050: Re-added DDR timings aka semc node as pointed out by Fabio. Thanks!
- imx8ulp: Re-added s400_mu device tree node.
Marcel Ziswiler (8):
vf610: synchronise device tree with linux
imxrt1020: migrate to build system included -u-boot.dtsi
imxrt1050: synchronise device tree with linux
imx8ulp: synchronise device tree with linux
imx8mq: synchronise device tree with linux
imx8mp: synchronise device tree with linux
imx8mn: synchronise device tree with linux
imx8mm: synchronise device tree with linux
arch/arm/dts/imx8mm-beacon-baseboard.dtsi | 4 +- arch/arm/dts/imx8mm-evk.dtsi | 43 ++ arch/arm/dts/imx8mm-icore-mx8mm.dtsi | 14 +- arch/arm/dts/imx8mm-mx8menlo.dts | 14 +- arch/arm/dts/imx8mm-u-boot.dtsi | 2 +- arch/arm/dts/imx8mm-venice-gw700x.dtsi | 24 +- arch/arm/dts/imx8mm-venice-gw7901.dts | 12 +- arch/arm/dts/imx8mm-venice-gw7902.dts | 14 +- arch/arm/dts/imx8mm-venice-gw7903.dts | 6 +- arch/arm/dts/imx8mm-venice-gw7904.dts | 4 + arch/arm/dts/imx8mm-verdin.dtsi | 50 +- arch/arm/dts/imx8mn-beacon-baseboard.dtsi | 4 +- arch/arm/dts/imx8mn-evk.dtsi | 45 +- arch/arm/dts/imx8mn-var-som-symphony.dts | 6 +- arch/arm/dts/imx8mn-venice-gw7902.dts | 9 +- arch/arm/dts/imx8mn.dtsi | 14 +- arch/arm/dts/imx8mp-dhcom-pdk2.dts | 29 +- arch/arm/dts/imx8mp-dhcom-som.dtsi | 20 +- arch/arm/dts/imx8mp-evk.dts | 179 ++++-- arch/arm/dts/imx8mp-icore-mx8mp-edimm2.2.dts | 2 +- arch/arm/dts/imx8mp-icore-mx8mp.dtsi | 2 +- arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts | 48 +- arch/arm/dts/imx8mp-u-boot.dtsi | 2 +- arch/arm/dts/imx8mp-venice-gw74xx.dts | 284 ++++++--- arch/arm/dts/imx8mp-verdin.dtsi | 32 +- arch/arm/dts/imx8mp.dtsi | 147 ++++- arch/arm/dts/imx8mq-evk.dts | 43 ++ arch/arm/dts/imx8mq-librem5-r3.dtsi | 45 ++ arch/arm/dts/imx8mq-librem5-r4.dts | 20 +- arch/arm/dts/imx8mq-librem5.dtsi | 153 ++++- arch/arm/dts/imx8mq-u-boot.dtsi | 10 +- arch/arm/dts/imx8mq.dtsi | 19 +- arch/arm/dts/imx8ulp-evk-u-boot.dtsi | 15 +- arch/arm/dts/imx8ulp-evk.dts | 240 ++----- arch/arm/dts/imx8ulp-pinfunc.h | 4 +- arch/arm/dts/imx8ulp.dtsi | 594 +++++------------- arch/arm/dts/imxrt1020-evk-u-boot.dtsi | 7 +- arch/arm/dts/imxrt1020-evk.dts | 1 - arch/arm/dts/imxrt1050-evk-u-boot.dtsi | 274 +++++++- arch/arm/dts/imxrt1050-evk.dts | 257 +------- arch/arm/dts/imxrt1050-pinfunc.h | 2 +- arch/arm/dts/imxrt1050.dtsi | 168 +++-- arch/arm/dts/vf610-pinfunc.h | 2 +- include/dt-bindings/clock/imx8mp-clock.h | 13 +- include/dt-bindings/clock/imx8ulp-clock.h | 53 +- include/dt-bindings/clock/imxrt1050-clock.h | 9 +- include/dt-bindings/interconnect/fsl,imx8mp.h | 59 ++ include/dt-bindings/interconnect/imx8mm.h | 50 ++ include/dt-bindings/interconnect/imx8mn.h | 41 ++ include/dt-bindings/power/imx8mp-power.h | 21 +- include/dt-bindings/power/imx8ulp-power.h | 26 + include/dt-bindings/reset/imx8mp-reset.h | 50 ++ include/dt-bindings/reset/imx8mq-reset.h | 61 +- include/dt-bindings/reset/imx8ulp-pcc-reset.h | 59 ++ 54 files changed, 1984 insertions(+), 1322 deletions(-) create mode 100644 arch/arm/dts/imx8mq-librem5-r3.dtsi create mode 100644 include/dt-bindings/interconnect/fsl,imx8mp.h create mode 100644 include/dt-bindings/interconnect/imx8mm.h create mode 100644 include/dt-bindings/interconnect/imx8mn.h create mode 100644 include/dt-bindings/power/imx8ulp-power.h create mode 100644 include/dt-bindings/reset/imx8mp-reset.h create mode 100644 include/dt-bindings/reset/imx8ulp-pcc-reset.h
Signature · 1 line
2.35.1
PATCH v5 1/8 vf610: synchronise device tree with linux
From: Marcel Ziswiler <[email protected]>
Synchronise device tree with linux v6.1-rc3.
---
(no changes since v4)
Changes in v4:
- Re-synched with v6.1-rc3 which now already contains the recent DDR pinmux addition.
arch/arm/dts/vf610-pinfunc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/dts/vf610-pinfunc.h +1 -1
@@ -802,7 +802,6 @@#define VF610_PAD_PTE28__EWM_OUT 0x214 0x000 ALT7 0x0#define VF610_PAD_PTA7__GPIO_134 0x218 0x000 ALT0 0x0#define VF610_PAD_PTA7__VIU_PIX_CLK 0x218 0x3AC ALT1 0x1 -#define VF610_PAD_DDR_RESETB 0x21c 0x000 ALT0 0x0#define VF610_PAD_DDR_A15__DDR_A_15 0x220 0x000 ALT0 0x0#define VF610_PAD_DDR_A14__DDR_A_14 0x224 0x000 ALT0 0x0
@@ -853,4 +852,5 @@#define VF610_PAD_DDR_ODT0__DDR_ODT_1 0x2d8 0x000 ALT0 0x0#define VF610_PAD_DDR_DDRBYTE1__DDR_DDRBYTE1 0x2dc 0x000 ALT0 0x0#define VF610_PAD_DDR_DDRBYTE2__DDR_DDRBYTE2 0x2e0 0x000 ALT0 0x0 +#endif
Signature · 1 line
2.35.1
PATCH v5 1/8 vf610: synchronise device tree with linux
Quoted 3 lines
From: Marcel Ziswiler <[email protected]> Synchronise device tree with linux v6.1-rc3.
Signed-off-by Marcel Ziswiler <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================
PATCH v5 2/8 imxrt1020: migrate to build system included -u-boot.dtsi
In reply to Marcel ZiswilerFrom: Marcel Ziswiler <[email protected]>
Migrate to using automatic build system included -u-boot.dtsi device tree include files.
---
Changes in v5:
- Add Giulio's reviewed-by and tested-by. Thanks!
Changes in v4:
- Re-named commit subject and re-worded commit message to indicate migration to automatic build system included -u-boot.dtsi device tree include files. Thanks to Giulio for pointing this out.
arch/arm/dts/imxrt1020-evk-u-boot.dtsi | 7 ++++--- arch/arm/dts/imxrt1020-evk.dts | 1 - 2 files changed, 4 insertions(+), 4 deletions(-)
arch/arm/dts/imxrt1020-evk-u-boot.dtsi +4 -3
@@ -67,9 +67,6 @@ imxrt1020-evk { u-boot,dm-spl; - pinctrl_lpuart1: lpuart1grp { - u-boot,dm-spl; - }; pinctrl_semc: semcgrp { u-boot,dm-spl;
@@ -81,6 +78,10 @@ }; }; +&pinctrl_lpuart1 { + u-boot,dm-spl; +}; + &usdhc1 { u-boot,dm-spl; };
arch/arm/dts/imxrt1020-evk.dts +0 -1
@@ -6,7 +6,6 @@ /dts-v1/; #include "imxrt1020.dtsi" -#include "imxrt1020-evk-u-boot.dtsi" #include "imxrt1020-pinfunc.h" / {
Signature · 1 line
2.35.1
PATCH v5 2/8 imxrt1020: migrate to build system included -u-boot.dtsi
Quoted 6 lines
From: Marcel Ziswiler <[email protected]> Migrate to using automatic build system included
-u-boot.dtsidevice tree include files.Signed-off-by Marcel Ziswiler <[email protected]>Reviewed-by Giulio Benetti <[email protected]>Tested-by Giulio Benetti <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================
PATCH v5 3/8 imxrt1050: synchronise device tree with linux
In reply to Marcel ZiswilerFrom: Marcel Ziswiler <[email protected]>
Synchronise device tree with linux v6.1-rc3.
Note: Nowadays, the intent is for them regular device trees to just be synchronised from them Linux kernel device trees and any and all U-Boot specific changes need to go into the -u-boot.dtsi device tree include files which BTW get included automatically by the U-Boot build system.
---
Changes in v5:
- Add clock-names "per" to lpuart and re-add lcdif and usb* nodes as pointed out by Giulio.
Changes in v4:
- Use imxrt1050-evk-u-boot.dtsi as provided/tested by Jesse.
- Explain intent in commit message as pointed out by Giulio.
- Re-synched with v6.1-rc3.
Changes in v3:
- Incorporate feedback from Jesse.
Changes in v2:
- imxrt1050: Re-added DDR timings aka semc node as pointed out by Fabio. Thanks!
arch/arm/dts/imxrt1050-evk-u-boot.dtsi | 274 ++++++++++++++++++-- arch/arm/dts/imxrt1050-evk.dts | 257 +++--------------- arch/arm/dts/imxrt1050-pinfunc.h | 2 +- arch/arm/dts/imxrt1050.dtsi | 168 +++++------- include/dt-bindings/clock/imxrt1050-clock.h | 9 +- 5 files changed, 366 insertions(+), 344 deletions(-)
arch/arm/dts/imxrt1050-evk-u-boot.dtsi +257 -17
@@ -4,9 +4,18 @@ * Author(s): Giulio Benetti <[email protected]> */ +#include <dt-bindings/memory/imxrt-sdram.h> +#include "imxrt1050-pinfunc.h" + / { + aliases { + display0 = &lcdif; + usbphy0 = &usbphy1; + }; + chosen { u-boot,dm-spl; + tick-timer = &gpt; }; clocks {
@@ -15,6 +24,92 @@ soc { u-boot,dm-spl; + + usbphy1: usbphy@400d9000 { + compatible = "fsl,imxrt-usbphy"; + reg = <0x400d9000 0x1000>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + }; + + usbmisc: usbmisc@402e0800 { + #index-cells = <1>; + compatible = "fsl,imxrt-usbmisc"; + reg = <0x402e0800 0x200>; + clocks = <&clks IMXRT1050_CLK_USBOH3>; + }; + + usbotg1: usb@402e0000 { + compatible = "fsl,imxrt-usb", "fsl,imx27-usb"; + reg = <0x402e0000 0x200>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMXRT1050_CLK_USBOH3>; + fsl,usbphy = <&usbphy1>; + fsl,usbmisc = <&usbmisc 0>; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; + rx-burst-size-dword = <0x10>; + status = "disabled"; + }; + + lcdif: lcdif@402b8000 { + compatible = "fsl,imxrt-lcdif"; + reg = <0x402b8000 0x4000>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMXRT1050_CLK_LCDIF_PIX>, + <&clks IMXRT1050_CLK_LCDIF_APB>; + clock-names = "pix", "axi"; + assigned-clocks = <&clks IMXRT1050_CLK_LCDIF_SEL>; + assigned-clock-parents = <&clks IMXRT1050_CLK_PLL5_VIDEO>; + status = "disabled"; + }; + + semc: semc@402f0000 { + compatible = "fsl,imxrt-semc"; + reg = <0x402f0000 0x4000>; + clocks = <&clks IMXRT1050_CLK_SEMC>; + pinctrl-0 = <&pinctrl_semc>; + pinctrl-names = "default"; + status = "okay"; + }; + }; +}; + +&semc { + u-boot,dm-spl; + /* + * Memory configuration from sdram datasheet IS42S16160J-6BLI + */ + fsl,sdram-mux = /bits/ 8 <MUX_A8_SDRAM_A8 + MUX_CSX0_SDRAM_CS1 + 0 + 0 + 0 + 0>; + fsl,sdram-control = /bits/ 8 <MEM_WIDTH_16BITS + BL_8 + COL_9BITS + CL_3>; + fsl,sdram-timing = /bits/ 8 <0x2 + 0x2 + 0x9 + 0x1 + 0x5 + 0x6 + + 0x20 + 0x09 + 0x01 + 0x00 + + 0x04 + 0x0A + 0x21 + 0x50>; + + bank1: bank@0 { + fsl,base-address = <0x80000000>; + fsl,memory-size = <MEM_SIZE_32M>; + u-boot,dm-spl; }; };
@@ -31,60 +126,205 @@ }; &gpio1 { + compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio"; u-boot,dm-spl; }; &gpio2 { + compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio"; u-boot,dm-spl; }; &gpio3 { + compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio"; u-boot,dm-spl; }; &gpio4 { + compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio"; u-boot,dm-spl; }; &gpio5 { + compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio"; u-boot,dm-spl; }; -&gpt1 { +&gpt { + clocks = <&osc>; + compatible = "fsl,imxrt-gpt"; + status = "okay"; u-boot,dm-spl; }; &lpuart1 { /* console */ + compatible = "fsl,imxrt-lpuart"; + clock-names = "per"; u-boot,dm-spl; }; -&semc { +&iomuxc { u-boot,dm-spl; + compatible = "fsl,imxrt-iomuxc"; + pinctrl-0 = <&pinctrl_lpuart1>; - bank1: bank@0 { + pinctrl_semc: semcgrp { + fsl,pins = < + MXRT1050_IOMUXC_GPIO_EMC_00_SEMC_DA00 + 0xf1 /* SEMC_D0 */ + MXRT1050_IOMUXC_GPIO_EMC_01_SEMC_DA01 + 0xf1 /* SEMC_D1 */ + MXRT1050_IOMUXC_GPIO_EMC_02_SEMC_DA02 + 0xf1 /* SEMC_D2 */ + MXRT1050_IOMUXC_GPIO_EMC_03_SEMC_DA03 + 0xf1 /* SEMC_D3 */ + MXRT1050_IOMUXC_GPIO_EMC_04_SEMC_DA04 + 0xf1 /* SEMC_D4 */ + MXRT1050_IOMUXC_GPIO_EMC_05_SEMC_DA05 + 0xf1 /* SEMC_D5 */ + MXRT1050_IOMUXC_GPIO_EMC_06_SEMC_DA06 + 0xf1 /* SEMC_D6 */ + MXRT1050_IOMUXC_GPIO_EMC_07_SEMC_DA07 + 0xf1 /* SEMC_D7 */ + MXRT1050_IOMUXC_GPIO_EMC_08_SEMC_DM00 + 0xf1 /* SEMC_DM0 */ + MXRT1050_IOMUXC_GPIO_EMC_09_SEMC_ADDR00 + 0xf1 /* SEMC_A0 */ + MXRT1050_IOMUXC_GPIO_EMC_10_SEMC_ADDR01 + 0xf1 /* SEMC_A1 */ + MXRT1050_IOMUXC_GPIO_EMC_11_SEMC_ADDR02 + 0xf1 /* SEMC_A2 */ + MXRT1050_IOMUXC_GPIO_EMC_12_SEMC_ADDR03 + 0xf1 /* SEMC_A3 */ + MXRT1050_IOMUXC_GPIO_EMC_13_SEMC_ADDR04 + 0xf1 /* SEMC_A4 */ + MXRT1050_IOMUXC_GPIO_EMC_14_SEMC_ADDR05 + 0xf1 /* SEMC_A5 */ + MXRT1050_IOMUXC_GPIO_EMC_15_SEMC_ADDR06 + 0xf1 /* SEMC_A6 */ + MXRT1050_IOMUXC_GPIO_EMC_16_SEMC_ADDR07 + 0xf1 /* SEMC_A7 */ + MXRT1050_IOMUXC_GPIO_EMC_17_SEMC_ADDR08 + 0xf1 /* SEMC_A8 */ + MXRT1050_IOMUXC_GPIO_EMC_18_SEMC_ADDR09 + 0xf1 /* SEMC_A9 */ + MXRT1050_IOMUXC_GPIO_EMC_19_SEMC_ADDR11 + 0xf1 /* SEMC_A11 */ + MXRT1050_IOMUXC_GPIO_EMC_20_SEMC_ADDR12 + 0xf1 /* SEMC_A12 */ + MXRT1050_IOMUXC_GPIO_EMC_21_SEMC_BA0 + 0xf1 /* SEMC_BA0 */ + MXRT1050_IOMUXC_GPIO_EMC_22_SEMC_BA1 + 0xf1 /* SEMC_BA1 */ + MXRT1050_IOMUXC_GPIO_EMC_23_SEMC_ADDR10 + 0xf1 /* SEMC_A10 */ + MXRT1050_IOMUXC_GPIO_EMC_24_SEMC_CAS + 0xf1 /* SEMC_CAS */ + MXRT1050_IOMUXC_GPIO_EMC_25_SEMC_RAS + 0xf1 /* SEMC_RAS */ + MXRT1050_IOMUXC_GPIO_EMC_26_SEMC_CLK + 0xf1 /* SEMC_CLK */ + MXRT1050_IOMUXC_GPIO_EMC_27_SEMC_CKE + 0xf1 /* SEMC_CKE */ + MXRT1050_IOMUXC_GPIO_EMC_28_SEMC_WE + 0xf1 /* SEMC_WE */ + MXRT1050_IOMUXC_GPIO_EMC_29_SEMC_CS0 + 0xf1 /* SEMC_CS0 */ + MXRT1050_IOMUXC_GPIO_EMC_30_SEMC_DA08 + 0xf1 /* SEMC_D8 */ + MXRT1050_IOMUXC_GPIO_EMC_31_SEMC_DA09 + 0xf1 /* SEMC_D9 */ + MXRT1050_IOMUXC_GPIO_EMC_32_SEMC_DA10 + 0xf1 /* SEMC_D10 */ + MXRT1050_IOMUXC_GPIO_EMC_33_SEMC_DA11 + 0xf1 /* SEMC_D11 */ + MXRT1050_IOMUXC_GPIO_EMC_34_SEMC_DA12 + 0xf1 /* SEMC_D12 */ + MXRT1050_IOMUXC_GPIO_EMC_35_SEMC_DA13 + 0xf1 /* SEMC_D13 */ + MXRT1050_IOMUXC_GPIO_EMC_36_SEMC_DA14 + 0xf1 /* SEMC_D14 */ + MXRT1050_IOMUXC_GPIO_EMC_37_SEMC_DA15 + 0xf1 /* SEMC_D15 */ + MXRT1050_IOMUXC_GPIO_EMC_38_SEMC_DM01 + 0xf1 /* SEMC_DM1 */ + MXRT1050_IOMUXC_GPIO_EMC_39_SEMC_DQS + (IMX_PAD_SION | 0xf1) /* SEMC_DQS */ + >; u-boot,dm-spl; }; -}; -&iomuxc { - u-boot,dm-spl; + pinctrl_lcdif: lcdifgrp { + fsl,pins = < + MXRT1050_IOMUXC_GPIO_B0_00_LCD_CLK 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_01_LCD_ENABLE 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_02_LCD_HSYNC 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_03_LCD_VSYNC 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_04_LCD_DATA00 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_05_LCD_DATA01 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_06_LCD_DATA02 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_07_LCD_DATA03 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_08_LCD_DATA04 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_09_LCD_DATA05 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_10_LCD_DATA06 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_11_LCD_DATA07 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_12_LCD_DATA08 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_13_LCD_DATA09 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_14_LCD_DATA10 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_15_LCD_DATA11 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B1_01_LCD_DATA13 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B1_02_LCD_DATA14 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B1_03_LCD_DATA15 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B1_15_GPIO2_IO31 0x0b069 + MXRT1050_IOMUXC_GPIO_AD_B0_02_GPIO1_IO02 0x0b069 + >; + }; - imxrt1050-evk { + pinctrl_lpuart1: lpuart1grp { u-boot,dm-spl; - pinctrl_lpuart1: lpuart1grp { - u-boot,dm-spl; - }; + }; - pinctrl_semc: semcgrp { - u-boot,dm-spl; - }; + pinctrl_usdhc0: usdhc0grp { + u-boot,dm-spl; + }; + }; + +&usdhc1 { + compatible = "fsl,imxrt-usdhc"; + u-boot,dm-spl; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <16>; + bus-width = <16>; - pinctrl_usdhc0: usdhc0grp { - u-boot,dm-spl; + display-timings { + timing0: timing0 { + clock-frequency = <9300000>; + hactive = <480>; + vactive = <272>; + hback-porch = <4>; + hfront-porch = <8>; + vback-porch = <4>; + vfront-porch = <8>; + hsync-len = <41>; + vsync-len = <10>; + de-active = <1>; + pixelclk-active = <0>; + hsync-active = <0>; + vsync-active = <0>; + }; }; }; }; -&usdhc1 { - u-boot,dm-spl; +&usbotg1 { + dr_mode = "host"; + status = "okay"; };
arch/arm/dts/imxrt1050-evk.dts +31 -226
294 lines not on this page · raw message
arch/arm/dts/imxrt1050-pinfunc.h +1 -1
@@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /* * Copyright (C) 2019 * Author(s): Giulio Benetti <[email protected]>
arch/arm/dts/imxrt1050.dtsi +70 -98
248 lines not on this page · raw message
include/dt-bindings/clock/imxrt1050-clock.h +7 -2
@@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /* * Copyright(C) 2019 * Author(s): Giulio Benetti <[email protected]>
@@ -62,6 +62,11 @@#define IMXRT1050_CLK_PLL7_USB_HOST 53#define IMXRT1050_CLK_LCDIF_PIX 54#define IMXRT1050_CLK_USBOH3 55 -#define IMXRT1050_CLK_END 56 +#define IMXRT1050_CLK_IPG_PDOF 56 +#define IMXRT1050_CLK_PER_CLK_SEL 57 +#define IMXRT1050_CLK_PER_PDOF 58 +#define IMXRT1050_CLK_DMA 59 +#define IMXRT1050_CLK_DMA_MUX 60 +#define IMXRT1050_CLK_END 61#endif /* __DT_BINDINGS_CLOCK_IMXRT1050_H */
Signature · 1 line
2.35.1
Re: [PATCH v5 3/8] imxrt1050: synchronise device tree with linux
Hi Marcel,
Quoted 10 lines · Marcel Ziswiler
From: Marcel Ziswiler <[email protected]>
Synchronise device tree with linux v6.1-rc3.
Note: Nowadays, the intent is for them regular device trees to just be synchronised from them Linux kernel device trees and any and all U-Boot specific changes need to go into the
-u-boot.dtsidevice tree include files which BTW get included automatically by the U-Boot build system.Signed-off-by Marcel Ziswiler <[email protected]>
and I've tested on the board and both lcd and usb works correctly so:
Thank you for the contribution!
Best regards
Signature · 2 lines
Giulio Benetti CEO/CTO@Benetti Engineering sas
Quoted 957 lines
---
Changes in v5:
- Add clock-names "per" to lpuart and re-add lcdif and usb* nodes as pointed out by Giulio.Changes in v4:
- Useimxrt1050-evk-u-boot.dtsias provided/tested by Jesse.
- Explain intent in commit message as pointed out by Giulio.
- Re-synched with v6.1-rc3.Changes in v3:
- Incorporate feedback from Jesse.Changes in v2:
- imxrt1050: Re-added DDR timings aka semc node as pointed out by Fabio. Thanks!arch/arm/dts/imxrt1050-evk-u-boot.dtsi | 274 ++++++++++++++++++-- arch/arm/dts/imxrt1050-evk.dts | 257 +++--------------- arch/arm/dts/imxrt1050-pinfunc.h | 2 +- arch/arm/dts/imxrt1050.dtsi | 168 +++++------- include/dt-bindings/clock/imxrt1050-clock.h | 9 +- 5 files changed, 366 insertions(+), 344 deletions(-)arch/arm/dts/imxrt1050-evk-u-boot.dtsi +257
-17@@ -4,9 +4,18 @@ * Author(s): Giulio Benetti <[email protected]> */ +#include <dt-bindings/memory/imxrt-sdram.h> +#include "imxrt1050-pinfunc.h" + / { + aliases { + display0 = &lcdif; + usbphy0 = &usbphy1; + }; + chosen { u-boot,dm-spl; + tick-timer = &gpt; }; clocks {@@ -15,6 +24,92 @@ soc { u-boot,dm-spl; + + usbphy1: usbphy@400d9000 { + compatible = "fsl,imxrt-usbphy"; + reg = <0x400d9000 0x1000>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + }; + + usbmisc: usbmisc@402e0800 { + #index-cells = <1>; + compatible = "fsl,imxrt-usbmisc"; + reg = <0x402e0800 0x200>; + clocks = <&clks IMXRT1050_CLK_USBOH3>; + }; + + usbotg1: usb@402e0000 { + compatible = "fsl,imxrt-usb", "fsl,imx27-usb"; + reg = <0x402e0000 0x200>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMXRT1050_CLK_USBOH3>; + fsl,usbphy = <&usbphy1>; + fsl,usbmisc = <&usbmisc 0>; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; + rx-burst-size-dword = <0x10>; + status = "disabled"; + }; + + lcdif: lcdif@402b8000 { + compatible = "fsl,imxrt-lcdif"; + reg = <0x402b8000 0x4000>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMXRT1050_CLK_LCDIF_PIX>, + <&clks IMXRT1050_CLK_LCDIF_APB>; + clock-names = "pix", "axi"; + assigned-clocks = <&clks IMXRT1050_CLK_LCDIF_SEL>; + assigned-clock-parents = <&clks IMXRT1050_CLK_PLL5_VIDEO>; + status = "disabled"; + }; + + semc: semc@402f0000 { + compatible = "fsl,imxrt-semc"; + reg = <0x402f0000 0x4000>; + clocks = <&clks IMXRT1050_CLK_SEMC>; + pinctrl-0 = <&pinctrl_semc>; + pinctrl-names = "default"; + status = "okay"; + }; + }; +}; + +&semc { + u-boot,dm-spl; + /* + * Memory configuration from sdram datasheet IS42S16160J-6BLI + */ + fsl,sdram-mux = /bits/ 8 <MUX_A8_SDRAM_A8 + MUX_CSX0_SDRAM_CS1 + 0 + 0 + 0 + 0>; + fsl,sdram-control = /bits/ 8 <MEM_WIDTH_16BITS + BL_8 + COL_9BITS + CL_3>; + fsl,sdram-timing = /bits/ 8 <0x2 + 0x2 + 0x9 + 0x1 + 0x5 + 0x6 + + 0x20 + 0x09 + 0x01 + 0x00 + + 0x04 + 0x0A + 0x21 + 0x50>; + + bank1: bank@0 { + fsl,base-address = <0x80000000>; + fsl,memory-size = <MEM_SIZE_32M>; + u-boot,dm-spl; }; };@@ -31,60 +126,205 @@ }; &gpio1 { + compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio"; u-boot,dm-spl; }; &gpio2 { + compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio"; u-boot,dm-spl; }; &gpio3 { + compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio"; u-boot,dm-spl; }; &gpio4 { + compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio"; u-boot,dm-spl; }; &gpio5 { + compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio"; u-boot,dm-spl; }; -&gpt1 { +&gpt { + clocks = <&osc>; + compatible = "fsl,imxrt-gpt"; + status = "okay"; u-boot,dm-spl; }; &lpuart1 { /* console */ + compatible = "fsl,imxrt-lpuart"; + clock-names = "per"; u-boot,dm-spl; }; -&semc { +&iomuxc { u-boot,dm-spl; + compatible = "fsl,imxrt-iomuxc"; + pinctrl-0 = <&pinctrl_lpuart1>; - bank1: bank@0 { + pinctrl_semc: semcgrp { + fsl,pins = < + MXRT1050_IOMUXC_GPIO_EMC_00_SEMC_DA00 + 0xf1 /* SEMC_D0 */ + MXRT1050_IOMUXC_GPIO_EMC_01_SEMC_DA01 + 0xf1 /* SEMC_D1 */ + MXRT1050_IOMUXC_GPIO_EMC_02_SEMC_DA02 + 0xf1 /* SEMC_D2 */ + MXRT1050_IOMUXC_GPIO_EMC_03_SEMC_DA03 + 0xf1 /* SEMC_D3 */ + MXRT1050_IOMUXC_GPIO_EMC_04_SEMC_DA04 + 0xf1 /* SEMC_D4 */ + MXRT1050_IOMUXC_GPIO_EMC_05_SEMC_DA05 + 0xf1 /* SEMC_D5 */ + MXRT1050_IOMUXC_GPIO_EMC_06_SEMC_DA06 + 0xf1 /* SEMC_D6 */ + MXRT1050_IOMUXC_GPIO_EMC_07_SEMC_DA07 + 0xf1 /* SEMC_D7 */ + MXRT1050_IOMUXC_GPIO_EMC_08_SEMC_DM00 + 0xf1 /* SEMC_DM0 */ + MXRT1050_IOMUXC_GPIO_EMC_09_SEMC_ADDR00 + 0xf1 /* SEMC_A0 */ + MXRT1050_IOMUXC_GPIO_EMC_10_SEMC_ADDR01 + 0xf1 /* SEMC_A1 */ + MXRT1050_IOMUXC_GPIO_EMC_11_SEMC_ADDR02 + 0xf1 /* SEMC_A2 */ + MXRT1050_IOMUXC_GPIO_EMC_12_SEMC_ADDR03 + 0xf1 /* SEMC_A3 */ + MXRT1050_IOMUXC_GPIO_EMC_13_SEMC_ADDR04 + 0xf1 /* SEMC_A4 */ + MXRT1050_IOMUXC_GPIO_EMC_14_SEMC_ADDR05 + 0xf1 /* SEMC_A5 */ + MXRT1050_IOMUXC_GPIO_EMC_15_SEMC_ADDR06 + 0xf1 /* SEMC_A6 */ + MXRT1050_IOMUXC_GPIO_EMC_16_SEMC_ADDR07 + 0xf1 /* SEMC_A7 */ + MXRT1050_IOMUXC_GPIO_EMC_17_SEMC_ADDR08 + 0xf1 /* SEMC_A8 */ + MXRT1050_IOMUXC_GPIO_EMC_18_SEMC_ADDR09 + 0xf1 /* SEMC_A9 */ + MXRT1050_IOMUXC_GPIO_EMC_19_SEMC_ADDR11 + 0xf1 /* SEMC_A11 */ + MXRT1050_IOMUXC_GPIO_EMC_20_SEMC_ADDR12 + 0xf1 /* SEMC_A12 */ + MXRT1050_IOMUXC_GPIO_EMC_21_SEMC_BA0 + 0xf1 /* SEMC_BA0 */ + MXRT1050_IOMUXC_GPIO_EMC_22_SEMC_BA1 + 0xf1 /* SEMC_BA1 */ + MXRT1050_IOMUXC_GPIO_EMC_23_SEMC_ADDR10 + 0xf1 /* SEMC_A10 */ + MXRT1050_IOMUXC_GPIO_EMC_24_SEMC_CAS + 0xf1 /* SEMC_CAS */ + MXRT1050_IOMUXC_GPIO_EMC_25_SEMC_RAS + 0xf1 /* SEMC_RAS */ + MXRT1050_IOMUXC_GPIO_EMC_26_SEMC_CLK + 0xf1 /* SEMC_CLK */ + MXRT1050_IOMUXC_GPIO_EMC_27_SEMC_CKE + 0xf1 /* SEMC_CKE */ + MXRT1050_IOMUXC_GPIO_EMC_28_SEMC_WE + 0xf1 /* SEMC_WE */ + MXRT1050_IOMUXC_GPIO_EMC_29_SEMC_CS0 + 0xf1 /* SEMC_CS0 */ + MXRT1050_IOMUXC_GPIO_EMC_30_SEMC_DA08 + 0xf1 /* SEMC_D8 */ + MXRT1050_IOMUXC_GPIO_EMC_31_SEMC_DA09 + 0xf1 /* SEMC_D9 */ + MXRT1050_IOMUXC_GPIO_EMC_32_SEMC_DA10 + 0xf1 /* SEMC_D10 */ + MXRT1050_IOMUXC_GPIO_EMC_33_SEMC_DA11 + 0xf1 /* SEMC_D11 */ + MXRT1050_IOMUXC_GPIO_EMC_34_SEMC_DA12 + 0xf1 /* SEMC_D12 */ + MXRT1050_IOMUXC_GPIO_EMC_35_SEMC_DA13 + 0xf1 /* SEMC_D13 */ + MXRT1050_IOMUXC_GPIO_EMC_36_SEMC_DA14 + 0xf1 /* SEMC_D14 */ + MXRT1050_IOMUXC_GPIO_EMC_37_SEMC_DA15 + 0xf1 /* SEMC_D15 */ + MXRT1050_IOMUXC_GPIO_EMC_38_SEMC_DM01 + 0xf1 /* SEMC_DM1 */ + MXRT1050_IOMUXC_GPIO_EMC_39_SEMC_DQS + (IMX_PAD_SION | 0xf1) /* SEMC_DQS */ + >; u-boot,dm-spl; }; -}; -&iomuxc { - u-boot,dm-spl; + pinctrl_lcdif: lcdifgrp { + fsl,pins = < + MXRT1050_IOMUXC_GPIO_B0_00_LCD_CLK 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_01_LCD_ENABLE 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_02_LCD_HSYNC 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_03_LCD_VSYNC 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_04_LCD_DATA00 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_05_LCD_DATA01 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_06_LCD_DATA02 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_07_LCD_DATA03 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_08_LCD_DATA04 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_09_LCD_DATA05 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_10_LCD_DATA06 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_11_LCD_DATA07 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_12_LCD_DATA08 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_13_LCD_DATA09 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_14_LCD_DATA10 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_15_LCD_DATA11 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B1_01_LCD_DATA13 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B1_02_LCD_DATA14 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B1_03_LCD_DATA15 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B1_15_GPIO2_IO31 0x0b069 + MXRT1050_IOMUXC_GPIO_AD_B0_02_GPIO1_IO02 0x0b069 + >; + }; - imxrt1050-evk { + pinctrl_lpuart1: lpuart1grp { u-boot,dm-spl; - pinctrl_lpuart1: lpuart1grp { - u-boot,dm-spl; - }; + }; - pinctrl_semc: semcgrp { - u-boot,dm-spl; - }; + pinctrl_usdhc0: usdhc0grp { + u-boot,dm-spl; + }; + }; + +&usdhc1 { + compatible = "fsl,imxrt-usdhc"; + u-boot,dm-spl; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <16>; + bus-width = <16>; - pinctrl_usdhc0: usdhc0grp { - u-boot,dm-spl; + display-timings { + timing0: timing0 { + clock-frequency = <9300000>; + hactive = <480>; + vactive = <272>; + hback-porch = <4>; + hfront-porch = <8>; + vback-porch = <4>; + vfront-porch = <8>; + hsync-len = <41>; + vsync-len = <10>; + de-active = <1>; + pixelclk-active = <0>; + hsync-active = <0>; + vsync-active = <0>; + }; }; }; }; -&usdhc1 { - u-boot,dm-spl; +&usbotg1 { + dr_mode = "host"; + status = "okay"; };arch/arm/dts/imxrt1050-evk.dts +31
-226@@ -1,4 +1,4 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2019 * Author(s): Giulio Benetti <[email protected]>@@ -6,7 +6,6 @@ /dts-v1/; #include "imxrt1050.dtsi" -#include "imxrt1050-evk-u-boot.dtsi" #include "imxrt1050-pinfunc.h" / {@@ -14,210 +13,52 @@ compatible = "fsl,imxrt1050-evk", "fsl,imxrt1050"; chosen { - bootargs = "root=/dev/ram"; - stdout-path = "serial0:115200n8"; - tick-timer = &gpt1; + stdout-path = &lpuart1; }; - memory { + aliases { + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + mmc0 = &usdhc1; + serial0 = &lpuart1; + }; + + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x2000000>; }; }; -&lpuart1 { /* console */ +&lpuart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpuart1>; status = "okay"; }; -&semc { - /* - * Memory configuration from sdram datasheet IS42S16160J-6BLI - */ - fsl,sdram-mux = /bits/ 8 <MUX_A8_SDRAM_A8 - MUX_CSX0_SDRAM_CS1 - 0 - 0 - 0 - 0>; - fsl,sdram-control = /bits/ 8 <MEM_WIDTH_16BITS - BL_8 - COL_9BITS - CL_3>; - fsl,sdram-timing = /bits/ 8 <0x2 - 0x2 - 0x9 - 0x1 - 0x5 - 0x6 - - 0x20 - 0x09 - 0x01 - 0x00 - - 0x04 - 0x0A - 0x21 - 0x50>; - - bank1: bank@0 { - fsl,base-address = <0x80000000>; - fsl,memory-size = <MEM_SIZE_32M>; - }; -}; - &iomuxc { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lpuart1>; - - imxrt1050-evk { - pinctrl_lpuart1: lpuart1grp { - fsl,pins = < - MXRT1050_IOMUXC_GPIO_AD_B0_12_LPUART1_TXD - 0xf1 - MXRT1050_IOMUXC_GPIO_AD_B0_13_LPUART1_RXD - 0xf1 - >; - }; - - pinctrl_semc: semcgrp { - fsl,pins = < - MXRT1050_IOMUXC_GPIO_EMC_00_SEMC_DA00 - 0xf1 /* SEMC_D0 */ - MXRT1050_IOMUXC_GPIO_EMC_01_SEMC_DA01 - 0xf1 /* SEMC_D1 */ - MXRT1050_IOMUXC_GPIO_EMC_02_SEMC_DA02 - 0xf1 /* SEMC_D2 */ - MXRT1050_IOMUXC_GPIO_EMC_03_SEMC_DA03 - 0xf1 /* SEMC_D3 */ - MXRT1050_IOMUXC_GPIO_EMC_04_SEMC_DA04 - 0xf1 /* SEMC_D4 */ - MXRT1050_IOMUXC_GPIO_EMC_05_SEMC_DA05 - 0xf1 /* SEMC_D5 */ - MXRT1050_IOMUXC_GPIO_EMC_06_SEMC_DA06 - 0xf1 /* SEMC_D6 */ - MXRT1050_IOMUXC_GPIO_EMC_07_SEMC_DA07 - 0xf1 /* SEMC_D7 */ - MXRT1050_IOMUXC_GPIO_EMC_08_SEMC_DM00 - 0xf1 /* SEMC_DM0 */ - MXRT1050_IOMUXC_GPIO_EMC_09_SEMC_ADDR00 - 0xf1 /* SEMC_A0 */ - MXRT1050_IOMUXC_GPIO_EMC_10_SEMC_ADDR01 - 0xf1 /* SEMC_A1 */ - MXRT1050_IOMUXC_GPIO_EMC_11_SEMC_ADDR02 - 0xf1 /* SEMC_A2 */ - MXRT1050_IOMUXC_GPIO_EMC_12_SEMC_ADDR03 - 0xf1 /* SEMC_A3 */ - MXRT1050_IOMUXC_GPIO_EMC_13_SEMC_ADDR04 - 0xf1 /* SEMC_A4 */ - MXRT1050_IOMUXC_GPIO_EMC_14_SEMC_ADDR05 - 0xf1 /* SEMC_A5 */ - MXRT1050_IOMUXC_GPIO_EMC_15_SEMC_ADDR06 - 0xf1 /* SEMC_A6 */ - MXRT1050_IOMUXC_GPIO_EMC_16_SEMC_ADDR07 - 0xf1 /* SEMC_A7 */ - MXRT1050_IOMUXC_GPIO_EMC_17_SEMC_ADDR08 - 0xf1 /* SEMC_A8 */ - MXRT1050_IOMUXC_GPIO_EMC_18_SEMC_ADDR09 - 0xf1 /* SEMC_A9 */ - MXRT1050_IOMUXC_GPIO_EMC_19_SEMC_ADDR11 - 0xf1 /* SEMC_A11 */ - MXRT1050_IOMUXC_GPIO_EMC_20_SEMC_ADDR12 - 0xf1 /* SEMC_A12 */ - MXRT1050_IOMUXC_GPIO_EMC_21_SEMC_BA0 - 0xf1 /* SEMC_BA0 */ - MXRT1050_IOMUXC_GPIO_EMC_22_SEMC_BA1 - 0xf1 /* SEMC_BA1 */ - MXRT1050_IOMUXC_GPIO_EMC_23_SEMC_ADDR10 - 0xf1 /* SEMC_A10 */ - MXRT1050_IOMUXC_GPIO_EMC_24_SEMC_CAS - 0xf1 /* SEMC_CAS */ - MXRT1050_IOMUXC_GPIO_EMC_25_SEMC_RAS - 0xf1 /* SEMC_RAS */ - MXRT1050_IOMUXC_GPIO_EMC_26_SEMC_CLK - 0xf1 /* SEMC_CLK */ - MXRT1050_IOMUXC_GPIO_EMC_27_SEMC_CKE - 0xf1 /* SEMC_CKE */ - MXRT1050_IOMUXC_GPIO_EMC_28_SEMC_WE - 0xf1 /* SEMC_WE */ - MXRT1050_IOMUXC_GPIO_EMC_29_SEMC_CS0 - 0xf1 /* SEMC_CS0 */ - MXRT1050_IOMUXC_GPIO_EMC_30_SEMC_DA08 - 0xf1 /* SEMC_D8 */ - MXRT1050_IOMUXC_GPIO_EMC_31_SEMC_DA09 - 0xf1 /* SEMC_D9 */ - MXRT1050_IOMUXC_GPIO_EMC_32_SEMC_DA10 - 0xf1 /* SEMC_D10 */ - MXRT1050_IOMUXC_GPIO_EMC_33_SEMC_DA11 - 0xf1 /* SEMC_D11 */ - MXRT1050_IOMUXC_GPIO_EMC_34_SEMC_DA12 - 0xf1 /* SEMC_D12 */ - MXRT1050_IOMUXC_GPIO_EMC_35_SEMC_DA13 - 0xf1 /* SEMC_D13 */ - MXRT1050_IOMUXC_GPIO_EMC_36_SEMC_DA14 - 0xf1 /* SEMC_D14 */ - MXRT1050_IOMUXC_GPIO_EMC_37_SEMC_DA15 - 0xf1 /* SEMC_D15 */ - MXRT1050_IOMUXC_GPIO_EMC_38_SEMC_DM01 - 0xf1 /* SEMC_DM1 */ - MXRT1050_IOMUXC_GPIO_EMC_39_SEMC_DQS - (IMX_PAD_SION | 0xf1) /* SEMC_DQS */ - >; - }; - - pinctrl_usdhc0: usdhc0grp { - fsl,pins = < - MXRT1050_IOMUXC_GPIO_B1_12_USDHC1_CD_B - 0x1B000 - MXRT1050_IOMUXC_GPIO_B1_14_USDHC1_VSELECT - 0xB069 - MXRT1050_IOMUXC_GPIO_SD_B0_00_USDHC1_CMD - 0x17061 - MXRT1050_IOMUXC_GPIO_SD_B0_01_USDHC1_CLK - 0x17061 - MXRT1050_IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3 - 0x17061 - MXRT1050_IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2 - 0x17061 - MXRT1050_IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1 - 0x17061 - MXRT1050_IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0 - 0x17061 - >; - }; - - pinctrl_lcdif: lcdifgrp { - fsl,pins = < - MXRT1050_IOMUXC_GPIO_B0_00_LCD_CLK 0x1b0b1 - MXRT1050_IOMUXC_GPIO_B0_01_LCD_ENABLE 0x1b0b1 - MXRT1050_IOMUXC_GPIO_B0_02_LCD_HSYNC 0x1b0b1 - MXRT1050_IOMUXC_GPIO_B0_03_LCD_VSYNC 0x1b0b1 - MXRT1050_IOMUXC_GPIO_B0_04_LCD_DATA00 0x1b0b1 - MXRT1050_IOMUXC_GPIO_B0_05_LCD_DATA01 0x1b0b1 - MXRT1050_IOMUXC_GPIO_B0_06_LCD_DATA02 0x1b0b1 - MXRT1050_IOMUXC_GPIO_B0_07_LCD_DATA03 0x1b0b1 - MXRT1050_IOMUXC_GPIO_B0_08_LCD_DATA04 0x1b0b1 - MXRT1050_IOMUXC_GPIO_B0_09_LCD_DATA05 0x1b0b1 - MXRT1050_IOMUXC_GPIO_B0_10_LCD_DATA06 0x1b0b1 - MXRT1050_IOMUXC_GPIO_B0_11_LCD_DATA07 0x1b0b1 - MXRT1050_IOMUXC_GPIO_B0_12_LCD_DATA08 0x1b0b1 - MXRT1050_IOMUXC_GPIO_B0_13_LCD_DATA09 0x1b0b1 - MXRT1050_IOMUXC_GPIO_B0_14_LCD_DATA10 0x1b0b1 - MXRT1050_IOMUXC_GPIO_B0_15_LCD_DATA11 0x1b0b1 - MXRT1050_IOMUXC_GPIO_B1_01_LCD_DATA13 0x1b0b1 - MXRT1050_IOMUXC_GPIO_B1_02_LCD_DATA14 0x1b0b1 - MXRT1050_IOMUXC_GPIO_B1_03_LCD_DATA15 0x1b0b1 - MXRT1050_IOMUXC_GPIO_B1_15_GPIO2_IO31 0x0b069 - MXRT1050_IOMUXC_GPIO_AD_B0_02_GPIO1_IO02 0x0b069 - >; - }; + pinctrl_lpuart1: lpuart1grp { + fsl,pins = < + MXRT1050_IOMUXC_GPIO_AD_B0_12_LPUART1_TXD 0xf1 + MXRT1050_IOMUXC_GPIO_AD_B0_13_LPUART1_RXD 0xf1 + >; }; -}; -&gpt1 { - status = "okay"; + pinctrl_usdhc0: usdhc0grp { + fsl,pins = < + MXRT1050_IOMUXC_GPIO_B1_12_USDHC1_CD_B 0x1B000 + MXRT1050_IOMUXC_GPIO_B1_14_USDHC1_VSELECT 0xB069 + MXRT1050_IOMUXC_GPIO_SD_B0_00_USDHC1_CMD 0x17061 + MXRT1050_IOMUXC_GPIO_SD_B0_01_USDHC1_CLK 0x17061 + MXRT1050_IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3 0x17061 + MXRT1050_IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2 0x17061 + MXRT1050_IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1 0x17061 + MXRT1050_IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0 0x17061 + >; + }; }; &usdhc1 {@@ -226,42 +67,6 @@ pinctrl-1 = <&pinctrl_usdhc0>; pinctrl-2 = <&pinctrl_usdhc0>; pinctrl-3 = <&pinctrl_usdhc0>; - status = "okay"; - cd-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; -}; - -&lcdif { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcdif>; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <16>; - bus-width = <16>; - - display-timings { - timing0: timing0 { - clock-frequency = <9300000>; - hactive = <480>; - vactive = <272>; - hback-porch = <4>; - hfront-porch = <8>; - vback-porch = <4>; - vfront-porch = <8>; - hsync-len = <41>; - vsync-len = <10>; - de-active = <1>; - pixelclk-active = <0>; - hsync-active = <0>; - vsync-active = <0>; - }; - }; - }; -}; - -&usbotg1 { - dr_mode = "host"; status = "okay"; };arch/arm/dts/imxrt1050-pinfunc.h +1
-1@@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /* * Copyright (C) 2019 * Author(s): Giulio Benetti <[email protected]> arch/arm/dts/imxrt1050.dtsi +70
-98@@ -1,4 +1,4 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2019 * Author(s): Giulio Benetti <[email protected]>@@ -8,53 +8,37 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/imxrt1050-clock.h> #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/memory/imxrt-sdram.h> / { #address-cells = <1>; #size-cells = <1>; - aliases { - display0 = &lcdif; - gpio0 = &gpio1; - gpio1 = &gpio2; - gpio2 = &gpio3; - gpio3 = &gpio4; - gpio4 = &gpio5; - mmc0 = &usdhc1; - serial0 = &lpuart1; - usbphy0 = &usbphy1; - }; - clocks { osc: osc { - compatible = "fsl,imx-osc", "fixed-clock"; + compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <24000000>; }; - }; - soc { - semc: semc@402f0000 { - compatible = "fsl,imxrt-semc"; - reg = <0x402f0000 0x4000>; - clocks = <&clks IMXRT1050_CLK_SEMC>; - pinctrl-0 = <&pinctrl_semc>; - pinctrl-names = "default"; - status = "okay"; + osc3M: osc3M { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <3000000>; }; + }; + soc { lpuart1: serial@40184000 { - compatible = "fsl,imxrt-lpuart"; + compatible = "fsl,imxrt1050-lpuart", "fsl,imx7ulp-lpuart"; reg = <0x40184000 0x4000>; - interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <20>; clocks = <&clks IMXRT1050_CLK_LPUART1>; - clock-names = "per"; + clock-names = "ipg"; status = "disabled"; }; - iomuxc: iomuxc@401f8000 { - compatible = "fsl,imxrt-iomuxc"; + iomuxc: pinctrl@401f8000 { + compatible = "fsl,imxrt1050-iomuxc"; reg = <0x401f8000 0x4000>; fsl,mux_mask = <0x7>; };@@ -64,31 +48,61 @@ reg = <0x400d8000 0x4000>; }; - clks: ccm@400fc000 { + clks: clock-controller@400fc000 { compatible = "fsl,imxrt1050-ccm"; reg = <0x400fc000 0x4000>; - interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <95>, <96>; + clocks = <&osc>; + clock-names = "osc"; #clock-cells = <1>; - }; - - usdhc1: usdhc@402c0000 { - compatible = "fsl,imxrt-usdhc"; - reg = <0x402c0000 0x10000>; - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMXRT1050_CLK_USDHC1>; - clock-names = "per"; + assigned-clocks = <&clks IMXRT1050_CLK_PLL1_BYPASS>, + <&clks IMXRT1050_CLK_PLL1_BYPASS>, + <&clks IMXRT1050_CLK_PLL2_BYPASS>, + <&clks IMXRT1050_CLK_PLL3_BYPASS>, + <&clks IMXRT1050_CLK_PLL3_PFD1_664_62M>, + <&clks IMXRT1050_CLK_PLL2_PFD2_396M>; + assigned-clock-parents = <&clks IMXRT1050_CLK_PLL1_REF_SEL>, + <&clks IMXRT1050_CLK_PLL1_ARM>, + <&clks IMXRT1050_CLK_PLL2_SYS>, + <&clks IMXRT1050_CLK_PLL3_USB_OTG>, + <&clks IMXRT1050_CLK_PLL3_USB_OTG>, + <&clks IMXRT1050_CLK_PLL2_SYS>; + }; + + edma1: dma-controller@400e8000 { + #dma-cells = <2>; + compatible = "fsl,imx7ulp-edma"; + reg = <0x400e8000 0x4000>, + <0x400ec000 0x4000>; + dma-channels = <32>; + interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>, <8>, + <9>, <10>, <11>, <12>, <13>, <14>, <15>, <16>; + clock-names = "dma", "dmamux0"; + clocks = <&clks IMXRT1050_CLK_DMA>, + <&clks IMXRT1050_CLK_DMA_MUX>; + }; + + usdhc1: mmc@402c0000 { + compatible = "fsl,imxrt1050-usdhc", "fsl,imx6sl-usdhc"; + reg = <0x402c0000 0x4000>; + interrupts = <110>; + clocks = <&clks IMXRT1050_CLK_IPG_PDOF>, + <&clks IMXRT1050_CLK_OSC>, + <&clks IMXRT1050_CLK_USDHC1>; + clock-names = "ipg", "ahb", "per"; bus-width = <4>; + fsl,wp-controller; + no-1-8-v; + max-frequency = <4000000>; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; status = "disabled"; }; gpio1: gpio@401b8000 { - compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio"; + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; reg = <0x401b8000 0x4000>; - interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <80>, <81>; gpio-controller; #gpio-cells = <2>; interrupt-controller;@@ -96,10 +110,9 @@ }; gpio2: gpio@401bc000 { - compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio"; + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; reg = <0x401bc000 0x4000>; - interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <82>, <83>; gpio-controller; #gpio-cells = <2>; interrupt-controller;@@ -107,10 +120,9 @@ }; gpio3: gpio@401c0000 { - compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio"; + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; reg = <0x401c0000 0x4000>; - interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <84>, <85>; gpio-controller; #gpio-cells = <2>; interrupt-controller;@@ -118,10 +130,9 @@ }; gpio4: gpio@401c4000 { - compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio"; + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; reg = <0x401c4000 0x4000>; - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <86>, <87>; gpio-controller; #gpio-cells = <2>; interrupt-controller;@@ -129,60 +140,21 @@ }; gpio5: gpio@400c0000 { - compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio"; + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; reg = <0x400c0000 0x4000>; - interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <88>, <89>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; - lcdif: lcdif@402b8000 { - compatible = "fsl,imxrt-lcdif"; - reg = <0x402b8000 0x4000>; - interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMXRT1050_CLK_LCDIF_PIX>, - <&clks IMXRT1050_CLK_LCDIF_APB>; - clock-names = "pix", "axi"; - assigned-clocks = <&clks IMXRT1050_CLK_LCDIF_SEL>; - assigned-clock-parents = <&clks IMXRT1050_CLK_PLL5_VIDEO>; - status = "disabled"; - }; - - gpt1: gpt1@401ec000 { - compatible = "fsl,imxrt-gpt"; + gpt: timer@401ec000 { + compatible = "fsl,imxrt1050-gpt", "fsl,imx6dl-gpt", "fsl,imx6sl-gpt"; reg = <0x401ec000 0x4000>; interrupts = <100>; - clocks = <&osc>; - status = "disabled"; - }; - - usbphy1: usbphy@400d9000 { - compatible = "fsl,imxrt-usbphy"; - reg = <0x400d9000 0x1000>; - interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; - }; - - usbmisc: usbmisc@402e0800 { - #index-cells = <1>; - compatible = "fsl,imxrt-usbmisc"; - reg = <0x402e0800 0x200>; - clocks = <&clks IMXRT1050_CLK_USBOH3>; - }; - - usbotg1: usb@402e0000 { - compatible = "fsl,imxrt-usb", "fsl,imx27-usb"; - reg = <0x402e0000 0x200>; - interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMXRT1050_CLK_USBOH3>; - fsl,usbphy = <&usbphy1>; - fsl,usbmisc = <&usbmisc 0>; - ahb-burst-config = <0x0>; - tx-burst-size-dword = <0x10>; - rx-burst-size-dword = <0x10>; - status = "disabled"; + clocks = <&osc3M>; + clock-names = "per"; }; }; };include/dt-bindings/clock/imxrt1050-clock.h +7
-2@@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /* * Copyright(C) 2019 * Author(s): Giulio Benetti <[email protected]> @@ -62,6 +62,11 @@#define IMXRT1050_CLK_PLL7_USB_HOST 53#define IMXRT1050_CLK_LCDIF_PIX 54#define IMXRT1050_CLK_USBOH3 55 -#define IMXRT1050_CLK_END 56 +#define IMXRT1050_CLK_IPG_PDOF 56 +#define IMXRT1050_CLK_PER_CLK_SEL 57 +#define IMXRT1050_CLK_PER_PDOF 58 +#define IMXRT1050_CLK_DMA 59 +#define IMXRT1050_CLK_DMA_MUX 60 +#define IMXRT1050_CLK_END 61#endif /* __DT_BINDINGS_CLOCK_IMXRT1050_H */
PATCH v5 3/8 imxrt1050: synchronise device tree with linux
In reply to Marcel ZiswilerQuoted 7 lines
From: Marcel Ziswiler <[email protected]> Synchronise device tree with linux v6.1-rc3.
Note: Nowadays, the intent is for them regular device trees to just be synchronised from them Linux kernel device trees and any and all U-Boot specific changes need to go into the-u-boot.dtsidevice tree include files which BTW get included automatically by the U-Boot build system.Signed-off-by Marcel Ziswiler <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================
PATCH v5 4/8 imx8ulp: synchronise device tree with linux
In reply to Marcel ZiswilerFrom: Marcel Ziswiler <[email protected]>
Synchronise device tree with linux v6.1-rc3.
---
(no changes since v4)
Changes in v4:
- Re-synched with v6.1-rc3.
Changes in v2:
- imx8ulp: Re-added s400_mu device tree node.
arch/arm/dts/imx8ulp-evk-u-boot.dtsi | 15 +- arch/arm/dts/imx8ulp-evk.dts | 240 ++----- arch/arm/dts/imx8ulp-pinfunc.h | 4 +- arch/arm/dts/imx8ulp.dtsi | 594 +++++------------- include/dt-bindings/clock/imx8ulp-clock.h | 53 +- include/dt-bindings/power/imx8ulp-power.h | 26 + include/dt-bindings/reset/imx8ulp-pcc-reset.h | 59 ++ 7 files changed, 369 insertions(+), 622 deletions(-) create mode 100644 include/dt-bindings/power/imx8ulp-power.h create mode 100644 include/dt-bindings/reset/imx8ulp-pcc-reset.h
arch/arm/dts/imx8ulp-evk-u-boot.dtsi +10 -5
@@ -3,7 +3,16 @@ * Copyright 2021 NXP */ -&{/soc@0} { +/ { + mu@27020000 { + compatible = "fsl,imx8ulp-mu"; + reg = <0 0x27020000 0 0x10000>; + status = "okay"; + u-boot,dm-spl; + }; +}; + +&soc { u-boot,dm-spl; };
@@ -23,10 +32,6 @@ u-boot,dm-spl; }; -&s400_mu { - u-boot,dm-spl; -}; - &lpuart5 { u-boot,dm-spl; };
arch/arm/dts/imx8ulp-evk.dts +69 -171
279 lines not on this page · raw message
arch/arm/dts/imx8ulp-pinfunc.h +2 -2
@@ -1,6 +1,6 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ +/* SPDX-License-Identifier: GPL-2.0+ OR MIT */ /* -* Copyright 2020 NXP +* Copyright 2021 NXP */ #ifndef __DTS_IMX8ULP_PINFUNC_H
arch/arm/dts/imx8ulp.dtsi +171 -423
808 lines not on this page · raw message
include/dt-bindings/clock/imx8ulp-clock.h +32 -21
110 lines not on this page · raw message
include/dt-bindings/power/imx8ulp-power.h new file +26 -0
@@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */ +/* +* Copyright 2021 NXP +*/ + +#ifndef __DT_BINDINGS_IMX8ULP_POWER_H__ +#define __DT_BINDINGS_IMX8ULP_POWER_H__ + +#define IMX8ULP_PD_DMA1 0 +#define IMX8ULP_PD_FLEXSPI2 1 +#define IMX8ULP_PD_USB0 2 +#define IMX8ULP_PD_USDHC0 3 +#define IMX8ULP_PD_USDHC1 4 +#define IMX8ULP_PD_USDHC2_USB1 5 +#define IMX8ULP_PD_DCNANO 6 +#define IMX8ULP_PD_EPDC 7 +#define IMX8ULP_PD_DMA2 8 +#define IMX8ULP_PD_GPU2D 9 +#define IMX8ULP_PD_GPU3D 10 +#define IMX8ULP_PD_HIFI4 11 +#define IMX8ULP_PD_ISI 12 +#define IMX8ULP_PD_MIPI_CSI 13 +#define IMX8ULP_PD_MIPI_DSI 14 +#define IMX8ULP_PD_PXP 15 + +#endif
include/dt-bindings/reset/imx8ulp-pcc-reset.h new file +59 -0
59 lines not on this page · raw message
Signature · 1 line
2.35.1
PATCH v5 4/8 imx8ulp: synchronise device tree with linux
Quoted 3 lines
From: Marcel Ziswiler <[email protected]> Synchronise device tree with linux v6.1-rc3.
Signed-off-by Marcel Ziswiler <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================
PATCH v5 5/8 imx8mq: synchronise device tree with linux
In reply to Marcel ZiswilerFrom: Marcel Ziswiler <[email protected]>
Synchronise device tree with linux v6.1-rc3.
---
(no changes since v4)
Changes in v4:
- Re-synched with v6.1-rc3.
arch/arm/dts/imx8mq-evk.dts | 43 +++++++ arch/arm/dts/imx8mq-librem5-r3.dtsi | 45 +++++++ arch/arm/dts/imx8mq-librem5-r4.dts | 20 +-- arch/arm/dts/imx8mq-librem5.dtsi | 153 +++++++++++++++++++++-- arch/arm/dts/imx8mq-u-boot.dtsi | 10 +- arch/arm/dts/imx8mq.dtsi | 19 +-- include/dt-bindings/reset/imx8mq-reset.h | 61 ++++----- 7 files changed, 281 insertions(+), 70 deletions(-) create mode 100644 arch/arm/dts/imx8mq-librem5-r3.dtsi
arch/arm/dts/imx8mq-evk.dts +43 -0
@@ -71,12 +71,36 @@ linux,autosuspend-period = <125>; }; + audio_codec_bt_sco: audio-codec-bt-sco { + compatible = "linux,bt-sco"; + #sound-dai-cells = <1>; + }; + wm8524: audio-codec { #sound-dai-cells = <0>; compatible = "wlf,wm8524"; wlf,mute-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; }; + sound-bt-sco { + compatible = "simple-audio-card"; + simple-audio-card,name = "bt-sco-audio"; + simple-audio-card,format = "dsp_a"; + simple-audio-card,bitclock-inversion; + simple-audio-card,frame-master = <&btcpu>; + simple-audio-card,bitclock-master = <&btcpu>; + + btcpu: simple-audio-card,cpu { + sound-dai = <&sai3>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <16>; + }; + + simple-audio-card,codec { + sound-dai = <&audio_codec_bt_sco 1>; + }; + }; + sound-wm8524 { compatible = "simple-audio-card"; simple-audio-card,name = "wm8524-audio";
@@ -386,6 +410,16 @@ status = "okay"; }; +&sai3 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&clk IMX8MQ_CLK_SAI3>; + assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + status = "okay"; +}; + &snvs_pwrkey { status = "okay"; };
@@ -548,6 +582,15 @@ >; }; + pinctrl_sai3: sai3grp { + fsl,pins = < + MX8MQ_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6 + MX8MQ_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6 + MX8MQ_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6 + MX8MQ_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0xd6 + >; + }; + pinctrl_spdif1: spdif1grp { fsl,pins = < MX8MQ_IOMUXC_SPDIF_TX_SPDIF1_OUT 0xd6
arch/arm/dts/imx8mq-librem5-r3.dtsi new file +45 -0
45 lines not on this page · raw message
arch/arm/dts/imx8mq-librem5-r4.dts +6 -14
@@ -1,35 +1,27 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) -// Copyright (C) 2020 Purism SPC <[email protected]> +// Copyright (C) 2021 Purism SPC <[email protected]> /dts-v1/; -#include "imx8mq-librem5.dtsi" +#include "imx8mq-librem5-r3.dtsi" / { model = "Purism Librem 5r4"; compatible = "purism,librem5r4", "purism,librem5", "fsl,imx8mq"; }; -&accel_gyro { - mount-matrix = "1", "0", "0", - "0", "1", "0", - "0", "0", "-1"; -}; - &bat { maxim,rsns-microohm = <1667>; }; -&bq25895 { - ti,battery-regulation-voltage = <4200000>; /* uV */ - ti,charge-current = <1500000>; /* uA */ - ti,termination-current = <144000>; /* uA */ -}; - &led_backlight { led-max-microamp = <25000>; }; +&lcd_panel { + compatible = "ys,ys57pss36bh5gq"; +}; + &proximity { proximity-near-level = <10>; };
arch/arm/dts/imx8mq-librem5.dtsi +140 -13
261 lines not on this page · raw message
arch/arm/dts/imx8mq-u-boot.dtsi +5 -5
@@ -10,23 +10,23 @@ }; -&{/soc@0} { +&soc { u-boot,dm-spl; }; -&{/soc@0/bus@30000000} { +&aips1 { u-boot,dm-spl; }; -&{/soc@0/bus@30400000} { +&aips2 { u-boot,dm-spl; }; -&{/soc@0/bus@30800000} { +&aips3 { u-boot,dm-spl; }; -&{/soc@0/bus@32c00000} { +&aips4 { u-boot,dm-spl; };
arch/arm/dts/imx8mq.dtsi +10 -9
@@ -94,7 +94,7 @@ clk_ext4: clock-ext4 { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency= <133000000>; + clock-frequency = <133000000>; clock-output-names = "clk_ext4"; };
@@ -320,7 +320,7 @@ arm,no-tick-in-suspend; }; - soc@0 { + soc: soc@0 { compatible = "fsl,imx8mq-soc", "simple-bus"; #address-cells = <1>; #size-cells = <1>;
@@ -329,7 +329,7 @@ nvmem-cells = <&imx8mq_uid>; nvmem-cell-names = "soc_unique_id"; - bus@30000000 { /* AIPS1 */ + aips1: bus@30000000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; reg = <0x30000000 0x400000>; #address-cells = <1>;
@@ -507,7 +507,7 @@ <0x00030005 0x00000053>, <0x00030006 0x0000005f>, <0x00030007 0x00000071>; - #thermal-sensor-cells = <1>; + #thermal-sensor-cells = <1>; }; wdog1: watchdog@30280000 {
@@ -534,7 +534,7 @@ status = "disabled"; }; - sdma2: sdma@302c0000 { + sdma2: dma-controller@302c0000 { compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma"; reg = <0x302c0000 0x10000>; interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
@@ -784,7 +784,7 @@ }; }; - bus@30400000 { /* AIPS2 */ + aips2: bus@30400000 { /* AIPS2 */ compatible = "fsl,aips-bus", "simple-bus"; reg = <0x30400000 0x400000>; #address-cells = <1>;
@@ -844,7 +844,7 @@ }; }; - bus@30800000 { /* AIPS3 */ + aips3: bus@30800000 { /* AIPS3 */ compatible = "fsl,aips-bus", "simple-bus"; reg = <0x30800000 0x400000>; #address-cells = <1>;
@@ -1018,6 +1018,7 @@ compatible = "fsl,sec-v4.0-job-ring"; reg = <0x1000 0x1000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; }; sec_jr1: jr@2000 {
@@ -1301,7 +1302,7 @@ status = "disabled"; }; - sdma1: sdma@30bd0000 { + sdma1: dma-controller@30bd0000 { compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma"; reg = <0x30bd0000 0x10000>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
@@ -1369,7 +1370,7 @@ }; }; - bus@32c00000 { /* AIPS4 */ + aips4: bus@32c00000 { /* AIPS4 */ compatible = "fsl,aips-bus", "simple-bus"; reg = <0x32c00000 0x400000>; #address-cells = <1>;
include/dt-bindings/reset/imx8mq-reset.h +32 -29
69 lines not on this page · raw message
Signature · 1 line
2.35.1
PATCH v5 5/8 imx8mq: synchronise device tree with linux
Quoted 3 lines
From: Marcel Ziswiler <[email protected]> Synchronise device tree with linux v6.1-rc3.
Signed-off-by Marcel Ziswiler <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================
PATCH v5 6/8 imx8mp: synchronise device tree with linux
In reply to Marcel ZiswilerFrom: Marcel Ziswiler <[email protected]>
Synchronise device tree with linux v6.1-rc3.
---
Changes in v5:
- Add Tim's tested-by. Thanks!
Changes in v4:
- Re-synched with v6.1-rc3.
arch/arm/dts/imx8mp-dhcom-pdk2.dts | 29 +- arch/arm/dts/imx8mp-dhcom-som.dtsi | 20 +- arch/arm/dts/imx8mp-evk.dts | 179 +++++++---- arch/arm/dts/imx8mp-icore-mx8mp-edimm2.2.dts | 2 +- arch/arm/dts/imx8mp-icore-mx8mp.dtsi | 2 +- arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts | 48 +-- arch/arm/dts/imx8mp-u-boot.dtsi | 2 +- arch/arm/dts/imx8mp-venice-gw74xx.dts | 284 +++++++++++++----- arch/arm/dts/imx8mp-verdin.dtsi | 32 +- arch/arm/dts/imx8mp.dtsi | 147 ++++++++- include/dt-bindings/clock/imx8mp-clock.h | 13 +- include/dt-bindings/interconnect/fsl,imx8mp.h | 59 ++++ include/dt-bindings/power/imx8mp-power.h | 21 +- include/dt-bindings/reset/imx8mp-reset.h | 50 +++ 14 files changed, 683 insertions(+), 205 deletions(-) create mode 100644 include/dt-bindings/interconnect/fsl,imx8mp.h create mode 100644 include/dt-bindings/reset/imx8mp-reset.h
arch/arm/dts/imx8mp-dhcom-pdk2.dts +20 -9
@@ -17,14 +17,13 @@ / { model = "DH electronics i.MX8M Plus DHCOM Premium Developer Kit (2)"; compatible = "dh,imx8mp-dhcom-pdk2", "dh,imx8mp-dhcom-som", - "fsl,imx8mp"; + "fsl,imx8mp"; chosen { stdout-path = &uart1; }; gpio-keys { - #size-cells = <0>; compatible = "gpio-keys"; button-0 {
@@ -67,7 +66,7 @@ led { compatible = "gpio-leds"; - led-5 { + led-0 { color = <LED_COLOR_ID_GREEN>; default-state = "off"; function = LED_FUNCTION_INDICATOR;
@@ -76,7 +75,7 @@ pinctrl-names = "default"; }; - led-6 { + led-1 { color = <LED_COLOR_ID_GREEN>; default-state = "off"; function = LED_FUNCTION_INDICATOR;
@@ -85,7 +84,7 @@ pinctrl-names = "default"; }; - led-7 { + led-2 { color = <LED_COLOR_ID_GREEN>; default-state = "off"; function = LED_FUNCTION_INDICATOR;
@@ -94,7 +93,7 @@ pinctrl-names = "default"; }; - led-8 { + led-3 { color = <LED_COLOR_ID_GREEN>; default-state = "off"; function = LED_FUNCTION_INDICATOR;
@@ -123,10 +122,11 @@ mdio { ethphypdk: ethernet-phy@7 { /* KSZ 9021 */ compatible = "ethernet-phy-ieee802.3-c22"; - interrupt-parent = <&gpio4>; - interrupts = <3 IRQ_TYPE_LEVEL_LOW>; pinctrl-0 = <&pinctrl_ethphy1>; pinctrl-names = "default"; + interrupt-parent = <&gpio4>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + max-speed = <100>; reg = <7>; reset-assert-us = <1000>; reset-deassert-us = <1000>;
@@ -143,7 +143,6 @@ txd2-skew-ps = <0>; txd3-skew-ps = <0>; txen-skew-ps = <0>; - max-speed = <100>; }; }; };
@@ -155,3 +154,15 @@ &usb3_1 { fsl,over-current-active-low; }; + +&iomuxc { + /* + * GPIO_A,B,C,D are connected to buttons. + * GPIO_E,F,H,I are connected to LEDs. + * GPIO_M is connected to CLKOUT2. + */ + pinctrl-0 = <&pinctrl_hog_base + &pinctrl_dhcom_g &pinctrl_dhcom_j + &pinctrl_dhcom_k &pinctrl_dhcom_l + &pinctrl_dhcom_int>; +};
arch/arm/dts/imx8mp-dhcom-som.dtsi +4 -16
@@ -1,4 +1,4 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// SPDX-License-Identifier: GPL-2.0 /* * Copyright (C) 2021-2022 Marek Vasut <[email protected]> */
@@ -224,10 +224,6 @@ }; &i2c3 { - /* - * iMX8MP 1P33A Errata ERR007805 - * I2C is limited to 384 kHz due to SoC bug. - */ clock-frequency = <100000>; pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c3>;
@@ -393,10 +389,6 @@ }; &i2c4 { - /* - * iMX8MP 1P33A Errata ERR007805 - * I2C is limited to 384 kHz due to SoC bug. - */ clock-frequency = <100000>; pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c4>;
@@ -407,10 +399,6 @@ }; &i2c5 { /* HDMI EDID bus */ - /* - * iMX8MP 1P33A Errata ERR007805 - * I2C is limited to 384 kHz due to SoC bug. - */ clock-frequency = <100000>; pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c5>;
@@ -802,8 +790,8 @@ pinctrl_i2c5: dhcom-i2c5-grp { fsl,pins = < - MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x40000084 - MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x40000084 + MX8MP_IOMUXC_HDMI_DDC_SCL__I2C5_SCL 0x40000084 + MX8MP_IOMUXC_HDMI_DDC_SDA__I2C5_SDA 0x40000084 >; };
@@ -830,7 +818,7 @@ pinctrl_rtc: dhcom-rtc-grp { fsl,pins = < /* RTC_#INT Interrupt */ - MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05 0x400001c6 + MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05 0x40000080 >; };
arch/arm/dts/imx8mp-evk.dts +124 -55
289 lines not on this page · raw message
arch/arm/dts/imx8mp-icore-mx8mp-edimm2.2.dts +1 -1
@@ -2,7 +2,7 @@ /* * Copyright (c) 2018 NXP * Copyright (c) 2019 Engicam srl - * Copyright (c) 2020 Amarula Solutons(India) + * Copyright (c) 2020 Amarula Solutions(India) */ /dts-v1/;
arch/arm/dts/imx8mp-icore-mx8mp.dtsi +1 -1
@@ -2,7 +2,7 @@ /* * Copyright (c) 2018 NXP * Copyright (c) 2019 Engicam srl - * Copyright (c) 2020 Amarula Solutons(India) + * Copyright (c) 2020 Amarula Solutions(India) */ / {
arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts +24 -24
93 lines not on this page · raw message
arch/arm/dts/imx8mp-u-boot.dtsi +1 -1
@@ -10,7 +10,7 @@ }; }; -&{/soc@0} { +&soc { u-boot,dm-pre-reloc; u-boot,dm-spl; };
arch/arm/dts/imx8mp-venice-gw74xx.dts +207 -77
493 lines not on this page · raw message
arch/arm/dts/imx8mp-verdin.dtsi +28 -4
@@ -49,7 +49,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; - wakeup { + button-wakeup { debounce-interval = <10>; /* Verdin CTRL_WAKE1_MICO# (SODIMM 252) */ gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
@@ -146,6 +146,30 @@ }; }; +&A53_0 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_1 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_2 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_3 { + cpu-supply = <®_vdd_arm>; +}; + +&cpu_alert0 { + temperature = <95000>; +}; + +&cpu_crit0 { + temperature = <105000>; +}; + /* Verdin SPI_1 */ &ecspi1 { #address-cells = <1>;
@@ -445,7 +469,7 @@ regulator-ramp-delay = <3125>; }; - BUCK2 { + reg_vdd_arm: BUCK2 { nxp,dvs-run-voltage = <950000>; nxp,dvs-standby-voltage = <850000>; regulator-always-on;
@@ -619,7 +643,7 @@ interrupts = <5 IRQ_TYPE_EDGE_FALLING>; reg = <0x4a>; /* Verdin GPIO_2 (SODIMM 208) */ - reset-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; status = "disabled"; }; };
@@ -696,7 +720,7 @@ pinctrl-0 = <&pinctrl_gpio_9_dsi>, <&pinctrl_i2s_2_bclk_touch_reset>; reg = <0x4a>; /* Verdin I2S_2_BCLK (TOUCH_RESET#, SODIMM 42) */ - reset-gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; status = "disabled"; };
arch/arm/dts/imx8mp.dtsi +139 -8
249 lines not on this page · raw message
include/dt-bindings/clock/imx8mp-clock.h +8 -5
@@ -117,7 +117,6 @@#define IMX8MP_CLK_AUDIO_AHB 108#define IMX8MP_CLK_MIPI_DSI_ESC_RX 109#define IMX8MP_CLK_IPG_ROOT 110 -#define IMX8MP_CLK_IPG_AUDIO_ROOT 111#define IMX8MP_CLK_DRAM_ALT 112#define IMX8MP_CLK_DRAM_APB 113#define IMX8MP_CLK_VPU_G1 114
@@ -125,7 +124,6 @@#define IMX8MP_CLK_CAN1 116#define IMX8MP_CLK_CAN2 117#define IMX8MP_CLK_MEMREPAIR 118 -#define IMX8MP_CLK_PCIE_PHY 119#define IMX8MP_CLK_PCIE_AUX 120#define IMX8MP_CLK_I2C5 121#define IMX8MP_CLK_I2C6 122
@@ -182,8 +180,6 @@#define IMX8MP_CLK_MEDIA_CAM2_PIX 173#define IMX8MP_CLK_MEDIA_LDB 174#define IMX8MP_CLK_MEDIA_MIPI_CSI2_ESC 175 -#define IMX8MP_CLK_PCIE2_CTRL 176 -#define IMX8MP_CLK_PCIE2_PHY 177#define IMX8MP_CLK_MEDIA_MIPI_TEST_BYTE 178#define IMX8MP_CLK_ECSPI3 179#define IMX8MP_CLK_PDM 180
@@ -321,8 +317,15 @@#define IMX8MP_CLK_AUDIO_AXI 310#define IMX8MP_CLK_HSIO_AXI 311#define IMX8MP_CLK_MEDIA_ISP 312 +#define IMX8MP_CLK_MEDIA_DISP2_PIX 313 +#define IMX8MP_CLK_CLKOUT1_SEL 314 +#define IMX8MP_CLK_CLKOUT1_DIV 315 +#define IMX8MP_CLK_CLKOUT1 316 +#define IMX8MP_CLK_CLKOUT2_SEL 317 +#define IMX8MP_CLK_CLKOUT2_DIV 318 +#define IMX8MP_CLK_CLKOUT2 319 -#define IMX8MP_CLK_END 313 +#define IMX8MP_CLK_END 320#define IMX8MP_CLK_AUDIOMIX_SAI1_IPG 0#define IMX8MP_CLK_AUDIOMIX_SAI1_MCLK1 1
include/dt-bindings/interconnect/fsl,imx8mp.h new file +59 -0
59 lines not on this page · raw message
include/dt-bindings/power/imx8mp-power.h +17 -4
@@ -38,9 +38,22 @@#define IMX8MP_MEDIABLK_PD_ISI 3#define IMX8MP_MEDIABLK_PD_MIPI_CSI2_2 4#define IMX8MP_MEDIABLK_PD_LCDIF_2 5 -#define IMX8MP_MEDIABLK_PD_ISP2 6 -#define IMX8MP_MEDIABLK_PD_ISP1 7 -#define IMX8MP_MEDIABLK_PD_DWE 8 -#define IMX8MP_MEDIABLK_PD_MIPI_DSI_2 9 +#define IMX8MP_MEDIABLK_PD_ISP 6 +#define IMX8MP_MEDIABLK_PD_DWE 7 +#define IMX8MP_MEDIABLK_PD_MIPI_DSI_2 8 + +#define IMX8MP_HDMIBLK_PD_IRQSTEER 0 +#define IMX8MP_HDMIBLK_PD_LCDIF 1 +#define IMX8MP_HDMIBLK_PD_PAI 2 +#define IMX8MP_HDMIBLK_PD_PVI 3 +#define IMX8MP_HDMIBLK_PD_TRNG 4 +#define IMX8MP_HDMIBLK_PD_HDMI_TX 5 +#define IMX8MP_HDMIBLK_PD_HDMI_TX_PHY 6 +#define IMX8MP_HDMIBLK_PD_HDCP 7 +#define IMX8MP_HDMIBLK_PD_HRV 8 + +#define IMX8MP_VPUBLK_PD_G1 0 +#define IMX8MP_VPUBLK_PD_G2 1 +#define IMX8MP_VPUBLK_PD_VC8000E 2#endif
include/dt-bindings/reset/imx8mp-reset.h new file +50 -0
50 lines not on this page · raw message
Signature · 1 line
2.35.1
PATCH v5 6/8 imx8mp: synchronise device tree with linux
Quoted 4 lines
From: Marcel Ziswiler <[email protected]> Synchronise device tree with linux v6.1-rc3.
Signed-off-by Marcel Ziswiler <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================
PATCH v5 7/8 imx8mn: synchronise device tree with linux
In reply to Marcel ZiswilerFrom: Marcel Ziswiler <[email protected]>
Synchronise device tree with linux v6.1-rc3.
---
Changes in v5:
- Add Tim's tested-by. Thanks!
Changes in v4:
- Re-based after Adam's common imx8mn-u-boot device tree creation.
- Re-synched with v6.1-rc3.
arch/arm/dts/imx8mn-beacon-baseboard.dtsi | 4 +- arch/arm/dts/imx8mn-evk.dtsi | 45 ++++++++++++++++++++++- arch/arm/dts/imx8mn-var-som-symphony.dts | 6 +-- arch/arm/dts/imx8mn-venice-gw7902.dts | 9 ++--- arch/arm/dts/imx8mn.dtsi | 14 +++---- include/dt-bindings/interconnect/imx8mn.h | 41 +++++++++++++++++++++ 6 files changed, 101 insertions(+), 18 deletions(-) create mode 100644 include/dt-bindings/interconnect/imx8mn.h
arch/arm/dts/imx8mn-beacon-baseboard.dtsi +2 -2
@@ -146,7 +146,7 @@ }; &easrc { - fsl,asrc-rate = <48000>; + fsl,asrc-rate = <48000>; status = "okay"; };
@@ -182,7 +182,7 @@ &usbotg1 { vbus-supply = <®_usb_otg_vbus>; disable-over-current; - dr_mode="otg"; + dr_mode = "otg"; status = "okay"; };
arch/arm/dts/imx8mn-evk.dtsi +44 -1
75 lines not on this page · raw message
arch/arm/dts/imx8mn-var-som-symphony.dts +3 -3
@@ -26,19 +26,19 @@ gpio-keys { compatible = "gpio-keys"; - back { + key-back { label = "Back"; gpios = <&pca9534 1 GPIO_ACTIVE_LOW>; linux,code = <KEY_BACK>; }; - home { + key-home { label = "Home"; gpios = <&pca9534 2 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOME>; }; - menu { + key-menu { label = "Menu"; gpios = <&pca9534 3 GPIO_ACTIVE_LOW>; linux,code = <KEY_MENU>;
arch/arm/dts/imx8mn-venice-gw7902.dts +4 -5
@@ -39,13 +39,13 @@ gpio-keys { compatible = "gpio-keys"; - user-pb { + key-user-pb { label = "user_pb"; gpios = <&gpio 2 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; - user-pb1x { + key-user-pb1x { label = "user_pb1x"; linux,code = <BTN_1>; interrupt-parent = <&gsc>;
@@ -59,14 +59,14 @@ interrupts = <1>; }; - eeprom-wp { + key-eeprom-wp { label = "eeprom_wp"; linux,code = <BTN_3>; interrupt-parent = <&gsc>; interrupts = <2>; }; - tamper { + key-tamper { label = "tamper"; linux,code = <BTN_4>; interrupt-parent = <&gsc>;
@@ -213,7 +213,6 @@ compatible = "microchip,mcp2515"; reg = <0>; clocks = <&can20m>; - oscillator-frequency = <20000000>; interrupt-parent = <&gpio2>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; spi-max-frequency = <10000000>;
arch/arm/dts/imx8mn.dtsi +7 -7
@@ -212,7 +212,7 @@ clk_ext4: clock-ext4 { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency= <133000000>; + clock-frequency = <133000000>; clock-output-names = "clk_ext4"; };
@@ -269,7 +269,7 @@ arm,no-tick-in-suspend; }; - soc@0 { + soc: soc@0 { compatible = "fsl,imx8mn-soc", "simple-bus"; #address-cells = <1>; #size-cells = <1>;
@@ -422,7 +422,7 @@ "ctx2_rx", "ctx2_tx", "ctx3_rx", "ctx3_tx"; firmware-name = "imx/easrc/easrc-imx8mn.bin"; - fsl,asrc-rate = <8000>; + fsl,asrc-rate = <8000>; fsl,asrc-format = <2>; status = "disabled"; };
@@ -672,7 +672,6 @@ <&clk IMX8MN_CLK_GPU_SHADER>, <&clk IMX8MN_CLK_GPU_BUS_ROOT>, <&clk IMX8MN_CLK_GPU_AHB>; - resets = <&src IMX8MQ_RESET_GPU_RESET>; }; pgc_dispmix: power-domain@3 {
@@ -857,6 +856,7 @@ compatible = "fsl,sec-v4.0-job-ring"; reg = <0x1000 0x1000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; }; sec_jr1: jr@2000 {
@@ -941,7 +941,7 @@ <&clk IMX8MN_CLK_USDHC1_ROOT>; clock-names = "ipg", "ahb", "per"; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; bus-width = <4>; status = "disabled"; };
@@ -955,7 +955,7 @@ <&clk IMX8MN_CLK_USDHC2_ROOT>; clock-names = "ipg", "ahb", "per"; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; bus-width = <4>; status = "disabled"; };
@@ -969,7 +969,7 @@ <&clk IMX8MN_CLK_USDHC3_ROOT>; clock-names = "ipg", "ahb", "per"; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; bus-width = <4>; status = "disabled"; };
include/dt-bindings/interconnect/imx8mn.h new file +41 -0
41 lines not on this page · raw message
Signature · 1 line
2.35.1
PATCH v5 7/8 imx8mn: synchronise device tree with linux
Quoted 4 lines
From: Marcel Ziswiler <[email protected]> Synchronise device tree with linux v6.1-rc3.
Signed-off-by Marcel Ziswiler <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================
PATCH v5 8/8 imx8mm: synchronise device tree with linux
In reply to Marcel ZiswilerFrom: Marcel Ziswiler <[email protected]>
Synchronise device tree with linux v6.1-rc3.
---
Changes in v5:
- Add Tim's tested-by. Thanks!
Changes in v4:
- Re-synched with v6.1-rc3.
arch/arm/dts/imx8mm-beacon-baseboard.dtsi | 4 +- arch/arm/dts/imx8mm-evk.dtsi | 43 +++++++++++++++++++ arch/arm/dts/imx8mm-icore-mx8mm.dtsi | 14 +++---- arch/arm/dts/imx8mm-mx8menlo.dts | 14 +++---- arch/arm/dts/imx8mm-u-boot.dtsi | 2 +- arch/arm/dts/imx8mm-venice-gw700x.dtsi | 24 +++++------ arch/arm/dts/imx8mm-venice-gw7901.dts | 12 ++++-- arch/arm/dts/imx8mm-venice-gw7902.dts | 14 +++---- arch/arm/dts/imx8mm-venice-gw7903.dts | 6 +-- arch/arm/dts/imx8mm-venice-gw7904.dts | 4 ++ arch/arm/dts/imx8mm-verdin.dtsi | 50 +++++++++++++++++------ include/dt-bindings/interconnect/imx8mm.h | 50 +++++++++++++++++++++++ 12 files changed, 179 insertions(+), 58 deletions(-) create mode 100644 include/dt-bindings/interconnect/imx8mm.h
arch/arm/dts/imx8mm-beacon-baseboard.dtsi +2 -2
@@ -285,14 +285,14 @@ &usbotg1 { vbus-supply = <®_usbotg1>; disable-over-current; - dr_mode="otg"; + dr_mode = "otg"; status = "okay"; }; &usbotg2 { pinctrl-names = "default"; disable-over-current; - dr_mode="host"; + dr_mode = "host"; status = "okay"; };
arch/arm/dts/imx8mm-evk.dtsi +43 -0
67 lines not on this page · raw message
arch/arm/dts/imx8mm-icore-mx8mm.dtsi +7 -7
@@ -2,7 +2,7 @@ /* * Copyright (c) 2018 NXP * Copyright (c) 2019 Engicam srl - * Copyright (c) 2020 Amarula Solutons(India) + * Copyright (c) 2020 Amarula Solutions(India) */ / {
@@ -84,42 +84,42 @@ }; reg_buck1: buck1 { - regulator-min-microvolt = <400000>; + regulator-min-microvolt = <400000>; regulator-max-microvolt = <1800000>; regulator-always-on; regulator-boot-on; }; reg_buck2: buck2 { - regulator-min-microvolt = <400000>; + regulator-min-microvolt = <400000>; regulator-max-microvolt = <1800000>; regulator-always-on; regulator-boot-on; }; reg_buck3: buck3 { - regulator-min-microvolt = <400000>; + regulator-min-microvolt = <400000>; regulator-max-microvolt = <1800000>; regulator-always-on; regulator-boot-on; }; reg_buck4: buck4 { - regulator-min-microvolt = <400000>; + regulator-min-microvolt = <400000>; regulator-max-microvolt = <1800000>; regulator-always-on; regulator-boot-on; }; reg_buck5: buck5 { - regulator-min-microvolt = <400000>; + regulator-min-microvolt = <400000>; regulator-max-microvolt = <1800000>; regulator-always-on; regulator-boot-on; }; reg_buck6: buck6 { - regulator-min-microvolt = <400000>; + regulator-min-microvolt = <400000>; regulator-max-microvolt = <1800000>; regulator-always-on; regulator-boot-on;
arch/arm/dts/imx8mm-mx8menlo.dts +7 -7
@@ -20,13 +20,13 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_led>; - user1 { + led-1 { label = "TestLed601"; gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc0"; }; - user2 { + led-2 { label = "TestLed602"; gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat";
@@ -152,11 +152,11 @@ * CPLD_reset is RESET_SOFT in schematic */ gpio-line-names = - "CPLD_D[1]", "CPLD_int", "CPLD_reset", "", - "", "CPLD_D[0]", "", "", - "", "", "", "CPLD_D[2]", - "CPLD_D[3]", "CPLD_D[4]", "CPLD_D[5]", "CPLD_D[6]", - "CPLD_D[7]", "", "", "", + "CPLD_D[6]", "CPLD_int", "CPLD_reset", "", + "", "CPLD_D[7]", "", "", + "", "", "", "CPLD_D[5]", + "CPLD_D[4]", "CPLD_D[3]", "CPLD_D[2]", "CPLD_D[1]", + "CPLD_D[0]", "", "", "", "", "", "", "", "", "", "", "KBD_intK", "", "", "", "";
arch/arm/dts/imx8mm-u-boot.dtsi +1 -1
@@ -9,7 +9,7 @@ }; }; -&{/soc@0} { +&soc { u-boot,dm-pre-reloc; u-boot,dm-spl; };
arch/arm/dts/imx8mm-venice-gw700x.dtsi +12 -12
@@ -16,13 +16,13 @@ gpio-keys { compatible = "gpio-keys"; - user-pb { + key-user-pb { label = "user_pb"; gpios = <&gpio 2 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; - user-pb1x { + key-user-pb1x { label = "user_pb1x"; linux,code = <BTN_1>; interrupt-parent = <&gsc>;
@@ -36,14 +36,14 @@ interrupts = <1>; }; - eeprom-wp { + key-eeprom-wp { label = "eeprom_wp"; linux,code = <BTN_3>; interrupt-parent = <&gsc>; interrupts = <2>; }; - tamper { + key-tamper { label = "tamper"; linux,code = <BTN_4>; interrupt-parent = <&gsc>;
@@ -286,8 +286,8 @@ regulator-name = "buck1"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1000000>; - regulator-min-microamp = <3800000>; - regulator-max-microamp = <6800000>; + regulator-min-microamp = <3800000>; + regulator-max-microamp = <6800000>; regulator-boot-on; regulator-always-on; };
@@ -297,8 +297,8 @@ regulator-name = "buck2"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <900000>; - regulator-min-microamp = <2200000>; - regulator-max-microamp = <5200000>; + regulator-min-microamp = <2200000>; + regulator-max-microamp = <5200000>; regulator-boot-on; regulator-always-on; };
@@ -308,8 +308,8 @@ regulator-name = "buck3"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1000000>; - regulator-min-microamp = <3800000>; - regulator-max-microamp = <6800000>; + regulator-min-microamp = <3800000>; + regulator-max-microamp = <6800000>; regulator-always-on; };
@@ -318,8 +318,8 @@ regulator-name = "buck4"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-min-microamp = <2200000>; - regulator-max-microamp = <5200000>; + regulator-min-microamp = <2200000>; + regulator-max-microamp = <5200000>; regulator-boot-on; regulator-always-on; };
arch/arm/dts/imx8mm-venice-gw7901.dts +8 -4
@@ -38,13 +38,13 @@ gpio-keys { compatible = "gpio-keys"; - user-pb { + key-user-pb { label = "user_pb"; gpios = <&gpio 2 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; - user-pb1x { + key-user-pb1x { label = "user_pb1x"; linux,code = <BTN_1>; interrupt-parent = <&gsc>;
@@ -58,14 +58,14 @@ interrupts = <1>; }; - eeprom-wp { + key-eeprom-wp { label = "eeprom_wp"; linux,code = <BTN_3>; interrupt-parent = <&gsc>; interrupts = <2>; }; - tamper { + key-tamper { label = "tamper"; linux,code = <BTN_4>; interrupt-parent = <&gsc>;
@@ -626,24 +626,28 @@ lan1: port@0 { reg = <0>; label = "lan1"; + phy-mode = "internal"; local-mac-address = [00 00 00 00 00 00]; }; lan2: port@1 { reg = <1>; label = "lan2"; + phy-mode = "internal"; local-mac-address = [00 00 00 00 00 00]; }; lan3: port@2 { reg = <2>; label = "lan3"; + phy-mode = "internal"; local-mac-address = [00 00 00 00 00 00]; }; lan4: port@3 { reg = <3>; label = "lan4"; + phy-mode = "internal"; local-mac-address = [00 00 00 00 00 00]; };
arch/arm/dts/imx8mm-venice-gw7902.dts +5 -9
@@ -42,13 +42,13 @@ gpio-keys { compatible = "gpio-keys"; - user-pb { + key-user-pb { label = "user_pb"; gpios = <&gpio 2 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; - user-pb1x { + key-user-pb1x { label = "user_pb1x"; linux,code = <BTN_1>; interrupt-parent = <&gsc>;
@@ -62,14 +62,14 @@ interrupts = <1>; }; - eeprom-wp { + key-eeprom-wp { label = "eeprom_wp"; linux,code = <BTN_3>; interrupt-parent = <&gsc>; interrupts = <2>; }; - tamper { + key-tamper { label = "tamper"; linux,code = <BTN_4>; interrupt-parent = <&gsc>;
@@ -222,7 +222,6 @@ compatible = "microchip,mcp2515"; reg = <0>; clocks = <&can20m>; - oscillator-frequency = <20000000>; interrupt-parent = <&gpio2>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; spi-max-frequency = <10000000>;
@@ -651,7 +650,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>; rts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; - cts-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; + cts-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; uart-has-rtscts; status = "okay"; };
@@ -742,9 +741,6 @@ MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x40000041 /* M2_RESET */ MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7 0x40000119 /* M2_OFF# */ MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x40000159 /* M2_WDIS# */ - MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x40000041 /* LTE_INT */ - MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x40000041 /* LTE_RST# */ - MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16 0x40000041 /* LTE_PWR */ MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x40000041 /* AMP GPIO1 */ MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12 0x40000041 /* AMP GPIO2 */ MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11 0x40000041 /* AMP GPIO3 */
arch/arm/dts/imx8mm-venice-gw7903.dts +3 -3
@@ -33,13 +33,13 @@ gpio-keys { compatible = "gpio-keys"; - user-pb { + key-user-pb { label = "user_pb"; gpios = <&gpio 2 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; - user-pb1x { + key-user-pb1x { label = "user_pb1x"; linux,code = <BTN_1>; interrupt-parent = <&gsc>;
@@ -53,7 +53,7 @@ interrupts = <1>; }; - eeprom-wp { + key-eeprom-wp { label = "eeprom_wp"; linux,code = <BTN_3>; interrupt-parent = <&gsc>;
arch/arm/dts/imx8mm-venice-gw7904.dts +4 -0
@@ -617,6 +617,10 @@ status = "okay"; }; +&pgc_mipi { + status = "disabled"; +}; + /* off-board RS232 */ &uart1 { pinctrl-names = "default";
arch/arm/dts/imx8mm-verdin.dtsi +37 -13
118 lines not on this page · raw message
include/dt-bindings/interconnect/imx8mm.h new file +50 -0
50 lines not on this page · raw message
Signature · 1 line
2.35.1
PATCH v5 8/8 imx8mm: synchronise device tree with linux
Quoted 4 lines
From: Marcel Ziswiler <[email protected]> Synchronise device tree with linux v6.1-rc3.
Signed-off-by Marcel Ziswiler <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================
Hi Marcel,
Quoted 15 lines · Marcel Ziswiler
From: Marcel Ziswiler <[email protected]>
This series synchronises them imx device trees with the upstream Linux kernel (v6.1-rc3). I split it into two parts. This is part 1.
It also fixes a few issues as discussed during/after the pre-mature application of my first series [1].
I am not touching kontron-sl-mx6ul as Frieder already took care of those [2].
Feedback welcome. Thanks!
Quoted 8 lines
[1] https://patchwork.ozlabs.org/project/uboot/cover/[email protected]/
[2] https://patchwork.ozlabs.org/project/uboot/cover/[email protected]/Changes in v5:
- Add Giulio's reviewed-by and tested-by. Thanks!
- Add clock-names "per" to lpuart and re-add lcdif and usb* nodes as pointed out by Giulio.
- Add Tim's tested-by. Thanks!
For the series:
Thanks