Skip to contentSkip to conversation

arm: dts: imx: sync device trees with upstream linux kernel part 1

PATCH In review Marcel Ziswiler 4 participants 19 messages Nov 7, 2022 – Nov 8, 2022

Subsystems (8)
lore
Share & tools
lore
#0 lore raw

v5 cover arm: dts: imx: sync device trees with upstream linux kernel part 1

From: Marcel Ziswiler <[email protected]>

This series synchronises them imx device trees with the upstream Linux kernel (v6.1-rc3). I split it into two parts. This is part 1.

It also fixes a few issues as discussed during/after the pre-mature application of my first series [1].

I am not touching kontron-sl-mx6ul as Frieder already took care of those [2].

Feedback welcome. Thanks!

[1] https://patchwork.ozlabs.org/project/uboot/cover/[email protected]/
[2] https://patchwork.ozlabs.org/project/uboot/cover/[email protected]/

Changes in v5:
- Add Giulio's reviewed-by and tested-by. Thanks!
- Add clock-names "per" to lpuart and re-add lcdif and usb* nodes as pointed out by Giulio.
- Add Tim's tested-by. Thanks!

Changes in v4:
- Re-synched with v6.1-rc3 which now already contains the recent DDR pinmux addition.
- Re-named commit subject and re-worded commit message to indicate migration to automatic build system included -u-boot.dtsi device tree include files. Thanks to Giulio for pointing this out.
- Use imxrt1050-evk-u-boot.dtsi as provided/tested by Jesse.
- Explain intent in commit message as pointed out by Giulio.
- Re-synched with v6.1-rc3.
- Re-based after Adam's common imx8mn-u-boot device tree creation.

Changes in v3:
- Incorporate feedback from Jesse.

Changes in v2:
- imxrt1050: Re-added DDR timings aka semc node as pointed out by Fabio. Thanks!
- imx8ulp: Re-added s400_mu device tree node.

Marcel Ziswiler (8):
vf610: synchronise device tree with linux
imxrt1020: migrate to build system included -u-boot.dtsi
imxrt1050: synchronise device tree with linux
imx8ulp: synchronise device tree with linux
imx8mq: synchronise device tree with linux
imx8mp: synchronise device tree with linux
imx8mn: synchronise device tree with linux
imx8mm: synchronise device tree with linux

 arch/arm/dts/imx8mm-beacon-baseboard.dtsi     |   4 +-
 arch/arm/dts/imx8mm-evk.dtsi                  |  43 ++
 arch/arm/dts/imx8mm-icore-mx8mm.dtsi          |  14 +-
 arch/arm/dts/imx8mm-mx8menlo.dts              |  14 +-
 arch/arm/dts/imx8mm-u-boot.dtsi               |   2 +-
 arch/arm/dts/imx8mm-venice-gw700x.dtsi        |  24 +-
 arch/arm/dts/imx8mm-venice-gw7901.dts         |  12 +-
 arch/arm/dts/imx8mm-venice-gw7902.dts         |  14 +-
 arch/arm/dts/imx8mm-venice-gw7903.dts         |   6 +-
 arch/arm/dts/imx8mm-venice-gw7904.dts         |   4 +
 arch/arm/dts/imx8mm-verdin.dtsi               |  50 +-
 arch/arm/dts/imx8mn-beacon-baseboard.dtsi     |   4 +-
 arch/arm/dts/imx8mn-evk.dtsi                  |  45 +-
 arch/arm/dts/imx8mn-var-som-symphony.dts      |   6 +-
 arch/arm/dts/imx8mn-venice-gw7902.dts         |   9 +-
 arch/arm/dts/imx8mn.dtsi                      |  14 +-
 arch/arm/dts/imx8mp-dhcom-pdk2.dts            |  29 +-
 arch/arm/dts/imx8mp-dhcom-som.dtsi            |  20 +-
 arch/arm/dts/imx8mp-evk.dts                   | 179 ++++--
 arch/arm/dts/imx8mp-icore-mx8mp-edimm2.2.dts  |   2 +-
 arch/arm/dts/imx8mp-icore-mx8mp.dtsi          |   2 +-
 arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts   |  48 +-
 arch/arm/dts/imx8mp-u-boot.dtsi               |   2 +-
 arch/arm/dts/imx8mp-venice-gw74xx.dts         | 284 ++++++---
 arch/arm/dts/imx8mp-verdin.dtsi               |  32 +-
 arch/arm/dts/imx8mp.dtsi                      | 147 ++++-
 arch/arm/dts/imx8mq-evk.dts                   |  43 ++
 arch/arm/dts/imx8mq-librem5-r3.dtsi           |  45 ++
 arch/arm/dts/imx8mq-librem5-r4.dts            |  20 +-
 arch/arm/dts/imx8mq-librem5.dtsi              | 153 ++++-
 arch/arm/dts/imx8mq-u-boot.dtsi               |  10 +-
 arch/arm/dts/imx8mq.dtsi                      |  19 +-
 arch/arm/dts/imx8ulp-evk-u-boot.dtsi          |  15 +-
 arch/arm/dts/imx8ulp-evk.dts                  | 240 ++-----
 arch/arm/dts/imx8ulp-pinfunc.h                |   4 +-
 arch/arm/dts/imx8ulp.dtsi                     | 594 +++++-------------
 arch/arm/dts/imxrt1020-evk-u-boot.dtsi        |   7 +-
 arch/arm/dts/imxrt1020-evk.dts                |   1 -
 arch/arm/dts/imxrt1050-evk-u-boot.dtsi        | 274 +++++++-
 arch/arm/dts/imxrt1050-evk.dts                | 257 +-------
 arch/arm/dts/imxrt1050-pinfunc.h              |   2 +-
 arch/arm/dts/imxrt1050.dtsi                   | 168 +++--
 arch/arm/dts/vf610-pinfunc.h                  |   2 +-
 include/dt-bindings/clock/imx8mp-clock.h      |  13 +-
 include/dt-bindings/clock/imx8ulp-clock.h     |  53 +-
 include/dt-bindings/clock/imxrt1050-clock.h   |   9 +-
 include/dt-bindings/interconnect/fsl,imx8mp.h |  59 ++
 include/dt-bindings/interconnect/imx8mm.h     |  50 ++
 include/dt-bindings/interconnect/imx8mn.h     |  41 ++
 include/dt-bindings/power/imx8mp-power.h      |  21 +-
 include/dt-bindings/power/imx8ulp-power.h     |  26 +
 include/dt-bindings/reset/imx8mp-reset.h      |  50 ++
 include/dt-bindings/reset/imx8mq-reset.h      |  61 +-
 include/dt-bindings/reset/imx8ulp-pcc-reset.h |  59 ++
 54 files changed, 1984 insertions(+), 1322 deletions(-)
 create mode 100644 arch/arm/dts/imx8mq-librem5-r3.dtsi
 create mode 100644 include/dt-bindings/interconnect/fsl,imx8mp.h
 create mode 100644 include/dt-bindings/interconnect/imx8mm.h
 create mode 100644 include/dt-bindings/interconnect/imx8mn.h
 create mode 100644 include/dt-bindings/power/imx8ulp-power.h
 create mode 100644 include/dt-bindings/reset/imx8mp-reset.h
 create mode 100644 include/dt-bindings/reset/imx8ulp-pcc-reset.h
Signature · 1 line
2.35.1
#1 lore raw

PATCH v5 1/8 vf610: synchronise device tree with linux

From: Marcel Ziswiler <[email protected]>

Synchronise device tree with linux v6.1-rc3.

---

(no changes since v4)

Changes in v4:
- Re-synched with v6.1-rc3 which now already contains the recent DDR pinmux addition.

 arch/arm/dts/vf610-pinfunc.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/dts/vf610-pinfunc.h +1 -1
index 740276431a..b7b7322a2d 100644
@@ -802,7 +802,6 @@
 #define VF610_PAD_PTE28__EWM_OUT		0x214 0x000 ALT7 0x0
 #define VF610_PAD_PTA7__GPIO_134		0x218 0x000 ALT0 0x0
 #define VF610_PAD_PTA7__VIU_PIX_CLK		0x218 0x3AC ALT1 0x1
-
 #define VF610_PAD_DDR_RESETB			0x21c 0x000 ALT0 0x0
 #define VF610_PAD_DDR_A15__DDR_A_15		0x220 0x000 ALT0 0x0
 #define VF610_PAD_DDR_A14__DDR_A_14		0x224 0x000 ALT0 0x0
@@ -853,4 +852,5 @@
 #define VF610_PAD_DDR_ODT0__DDR_ODT_1		0x2d8 0x000 ALT0 0x0
 #define VF610_PAD_DDR_DDRBYTE1__DDR_DDRBYTE1	0x2dc 0x000 ALT0 0x0
 #define VF610_PAD_DDR_DDRBYTE2__DDR_DDRBYTE2	0x2e0 0x000 ALT0 0x0
+
 #endif
Signature · 1 line
2.35.1
#2 lore raw

PATCH v5 1/8 vf610: synchronise device tree with linux

Quoted 3 lines

From: Marcel Ziswiler <[email protected]> Synchronise device tree with linux v6.1-rc3.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================
#3 lore raw

PATCH v5 2/8 imxrt1020: migrate to build system included -u-boot.dtsi

In reply to Marcel Ziswiler

From: Marcel Ziswiler <[email protected]>

Migrate to using automatic build system included -u-boot.dtsi device tree include files.

---

Changes in v5:
- Add Giulio's reviewed-by and tested-by. Thanks!

Changes in v4:
- Re-named commit subject and re-worded commit message to indicate migration to automatic build system included -u-boot.dtsi device tree include files. Thanks to Giulio for pointing this out.

 arch/arm/dts/imxrt1020-evk-u-boot.dtsi | 7 ++++---
 arch/arm/dts/imxrt1020-evk.dts         | 1 -
 2 files changed, 4 insertions(+), 4 deletions(-)
arch/arm/dts/imxrt1020-evk-u-boot.dtsi +4 -3
index 9e1b074d2e..7cab486f5f 100644
@@ -67,9 +67,6 @@
 
 	imxrt1020-evk {
 		u-boot,dm-spl;
-		pinctrl_lpuart1: lpuart1grp {
-			u-boot,dm-spl;
-		};
 
 		pinctrl_semc: semcgrp {
 			u-boot,dm-spl;
@@ -81,6 +78,10 @@
 	};
 };
 
+&pinctrl_lpuart1 {
+	u-boot,dm-spl;
+};
+
 &usdhc1 {
 	u-boot,dm-spl;
 };
arch/arm/dts/imxrt1020-evk.dts +0 -1
index 22ae5ed735..d4d1de4ea8 100644
@@ -6,7 +6,6 @@
 
 /dts-v1/;
 #include "imxrt1020.dtsi"
-#include "imxrt1020-evk-u-boot.dtsi"
 #include "imxrt1020-pinfunc.h"
 
 / {
Signature · 1 line
2.35.1
#4 lore raw

PATCH v5 2/8 imxrt1020: migrate to build system included -u-boot.dtsi

Quoted 6 lines

From: Marcel Ziswiler <[email protected]> Migrate to using automatic build system included -u-boot.dtsi device tree include files.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================
#5 lore raw

PATCH v5 3/8 imxrt1050: synchronise device tree with linux

In reply to Marcel Ziswiler

From: Marcel Ziswiler <[email protected]>

Synchronise device tree with linux v6.1-rc3.

Note: Nowadays, the intent is for them regular device trees to just be synchronised from them Linux kernel device trees and any and all U-Boot specific changes need to go into the -u-boot.dtsi device tree include files which BTW get included automatically by the U-Boot build system.

---

Changes in v5:
- Add clock-names "per" to lpuart and re-add lcdif and usb* nodes as pointed out by Giulio.

Changes in v4:
- Use imxrt1050-evk-u-boot.dtsi as provided/tested by Jesse.
- Explain intent in commit message as pointed out by Giulio.
- Re-synched with v6.1-rc3.

Changes in v3:
- Incorporate feedback from Jesse.

Changes in v2:
- imxrt1050: Re-added DDR timings aka semc node as pointed out by Fabio. Thanks!

 arch/arm/dts/imxrt1050-evk-u-boot.dtsi      | 274 ++++++++++++++++++--
 arch/arm/dts/imxrt1050-evk.dts              | 257 +++---------------
 arch/arm/dts/imxrt1050-pinfunc.h            |   2 +-
 arch/arm/dts/imxrt1050.dtsi                 | 168 +++++-------
 include/dt-bindings/clock/imxrt1050-clock.h |   9 +-
 5 files changed, 366 insertions(+), 344 deletions(-)
arch/arm/dts/imxrt1050-evk-u-boot.dtsi +257 -17
index 617cece448..e217dfd9eb 100644
@@ -4,9 +4,18 @@
  * Author(s): Giulio Benetti <[email protected]>
  */
 
+#include <dt-bindings/memory/imxrt-sdram.h>
+#include "imxrt1050-pinfunc.h"
+
 / {
+	aliases {
+		display0 = &lcdif;
+		usbphy0 = &usbphy1;
+	};
+
 	chosen {
 		u-boot,dm-spl;
+		tick-timer = &gpt;
 	};
 
 	clocks {
@@ -15,6 +24,92 @@
 
 	soc {
 		u-boot,dm-spl;
+
+		usbphy1: usbphy@400d9000 {
+			compatible = "fsl,imxrt-usbphy";
+			reg = <0x400d9000 0x1000>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		usbmisc: usbmisc@402e0800 {
+			#index-cells = <1>;
+			compatible = "fsl,imxrt-usbmisc";
+			reg = <0x402e0800 0x200>;
+			clocks = <&clks IMXRT1050_CLK_USBOH3>;
+		};
+
+		usbotg1: usb@402e0000 {
+			compatible = "fsl,imxrt-usb", "fsl,imx27-usb";
+			reg = <0x402e0000 0x200>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMXRT1050_CLK_USBOH3>;
+			fsl,usbphy = <&usbphy1>;
+			fsl,usbmisc = <&usbmisc 0>;
+			ahb-burst-config = <0x0>;
+			tx-burst-size-dword = <0x10>;
+			rx-burst-size-dword = <0x10>;
+			status = "disabled";
+		};
+
+		lcdif: lcdif@402b8000 {
+			compatible = "fsl,imxrt-lcdif";
+			reg = <0x402b8000 0x4000>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMXRT1050_CLK_LCDIF_PIX>,
+				 <&clks IMXRT1050_CLK_LCDIF_APB>;
+			clock-names = "pix", "axi";
+			assigned-clocks = <&clks IMXRT1050_CLK_LCDIF_SEL>;
+			assigned-clock-parents = <&clks IMXRT1050_CLK_PLL5_VIDEO>;
+			status = "disabled";
+		};
+
+		semc: semc@402f0000 {
+			compatible = "fsl,imxrt-semc";
+			reg = <0x402f0000 0x4000>;
+			clocks = <&clks IMXRT1050_CLK_SEMC>;
+			pinctrl-0 = <&pinctrl_semc>;
+			pinctrl-names = "default";
+			status = "okay";
+		};
+	};
+};
+
+&semc {
+	u-boot,dm-spl;
+	/*
+	 * Memory configuration from sdram datasheet IS42S16160J-6BLI
+	 */
+	fsl,sdram-mux = /bits/ 8 <MUX_A8_SDRAM_A8
+				MUX_CSX0_SDRAM_CS1
+				0
+				0
+				0
+				0>;
+	fsl,sdram-control = /bits/ 8 <MEM_WIDTH_16BITS
+					BL_8
+					COL_9BITS
+					CL_3>;
+	fsl,sdram-timing = /bits/ 8 <0x2
+				     0x2
+				     0x9
+				     0x1
+				     0x5
+				     0x6
+
+				     0x20
+				     0x09
+				     0x01
+				     0x00
+
+				     0x04
+				     0x0A
+				     0x21
+				     0x50>;
+
+	bank1: bank@0 {
+		fsl,base-address = <0x80000000>;
+		fsl,memory-size = <MEM_SIZE_32M>;
+		u-boot,dm-spl;
 	};
 };
 
@@ -31,60 +126,205 @@
 };
 
 &gpio1 {
+	compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
 	u-boot,dm-spl;
 };
 
 &gpio2 {
+	compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
 	u-boot,dm-spl;
 };
 
 &gpio3 {
+	compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
 	u-boot,dm-spl;
 };
 
 &gpio4 {
+	compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
 	u-boot,dm-spl;
 };
 
 &gpio5 {
+	compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
 	u-boot,dm-spl;
 };
 
-&gpt1 {
+&gpt {
+	clocks = <&osc>;
+	compatible = "fsl,imxrt-gpt";
+	status = "okay";
 	u-boot,dm-spl;
 };
 
 &lpuart1 { /* console */
+	compatible = "fsl,imxrt-lpuart";
+	clock-names = "per";
 	u-boot,dm-spl;
 };
 
-&semc {
+&iomuxc {
 	u-boot,dm-spl;
+	compatible = "fsl,imxrt-iomuxc";
+	pinctrl-0 = <&pinctrl_lpuart1>;
 
-	bank1: bank@0 {
+	pinctrl_semc: semcgrp {
+		fsl,pins = <
+			MXRT1050_IOMUXC_GPIO_EMC_00_SEMC_DA00
+				0xf1	/* SEMC_D0 */
+			MXRT1050_IOMUXC_GPIO_EMC_01_SEMC_DA01
+				0xf1	/* SEMC_D1 */
+			MXRT1050_IOMUXC_GPIO_EMC_02_SEMC_DA02
+				0xf1	/* SEMC_D2 */
+			MXRT1050_IOMUXC_GPIO_EMC_03_SEMC_DA03
+				0xf1	/* SEMC_D3 */
+			MXRT1050_IOMUXC_GPIO_EMC_04_SEMC_DA04
+				0xf1	/* SEMC_D4 */
+			MXRT1050_IOMUXC_GPIO_EMC_05_SEMC_DA05
+				0xf1	/* SEMC_D5 */
+			MXRT1050_IOMUXC_GPIO_EMC_06_SEMC_DA06
+				0xf1	/* SEMC_D6 */
+			MXRT1050_IOMUXC_GPIO_EMC_07_SEMC_DA07
+				0xf1	/* SEMC_D7 */
+			MXRT1050_IOMUXC_GPIO_EMC_08_SEMC_DM00
+				0xf1	/* SEMC_DM0 */
+			MXRT1050_IOMUXC_GPIO_EMC_09_SEMC_ADDR00
+				0xf1	/* SEMC_A0 */
+			MXRT1050_IOMUXC_GPIO_EMC_10_SEMC_ADDR01
+				0xf1	/* SEMC_A1 */
+			MXRT1050_IOMUXC_GPIO_EMC_11_SEMC_ADDR02
+				0xf1	/* SEMC_A2 */
+			MXRT1050_IOMUXC_GPIO_EMC_12_SEMC_ADDR03
+				0xf1	/* SEMC_A3 */
+			MXRT1050_IOMUXC_GPIO_EMC_13_SEMC_ADDR04
+				0xf1	/* SEMC_A4 */
+			MXRT1050_IOMUXC_GPIO_EMC_14_SEMC_ADDR05
+				0xf1	/* SEMC_A5 */
+			MXRT1050_IOMUXC_GPIO_EMC_15_SEMC_ADDR06
+				0xf1	/* SEMC_A6 */
+			MXRT1050_IOMUXC_GPIO_EMC_16_SEMC_ADDR07
+				0xf1	/* SEMC_A7 */
+			MXRT1050_IOMUXC_GPIO_EMC_17_SEMC_ADDR08
+				0xf1	/* SEMC_A8 */
+			MXRT1050_IOMUXC_GPIO_EMC_18_SEMC_ADDR09
+				0xf1	/* SEMC_A9 */
+			MXRT1050_IOMUXC_GPIO_EMC_19_SEMC_ADDR11
+				0xf1	/* SEMC_A11 */
+			MXRT1050_IOMUXC_GPIO_EMC_20_SEMC_ADDR12
+				0xf1	/* SEMC_A12 */
+			MXRT1050_IOMUXC_GPIO_EMC_21_SEMC_BA0
+				0xf1	/* SEMC_BA0 */
+			MXRT1050_IOMUXC_GPIO_EMC_22_SEMC_BA1
+				0xf1	/* SEMC_BA1 */
+			MXRT1050_IOMUXC_GPIO_EMC_23_SEMC_ADDR10
+				0xf1	/* SEMC_A10 */
+			MXRT1050_IOMUXC_GPIO_EMC_24_SEMC_CAS
+				0xf1	/* SEMC_CAS */
+			MXRT1050_IOMUXC_GPIO_EMC_25_SEMC_RAS
+				0xf1	/* SEMC_RAS */
+			MXRT1050_IOMUXC_GPIO_EMC_26_SEMC_CLK
+				0xf1	/* SEMC_CLK */
+			MXRT1050_IOMUXC_GPIO_EMC_27_SEMC_CKE
+				0xf1	/* SEMC_CKE */
+			MXRT1050_IOMUXC_GPIO_EMC_28_SEMC_WE
+				0xf1	/* SEMC_WE */
+			MXRT1050_IOMUXC_GPIO_EMC_29_SEMC_CS0
+				0xf1	/* SEMC_CS0 */
+			MXRT1050_IOMUXC_GPIO_EMC_30_SEMC_DA08
+				0xf1	/* SEMC_D8 */
+			MXRT1050_IOMUXC_GPIO_EMC_31_SEMC_DA09
+				0xf1	/* SEMC_D9 */
+			MXRT1050_IOMUXC_GPIO_EMC_32_SEMC_DA10
+				0xf1	/* SEMC_D10 */
+			MXRT1050_IOMUXC_GPIO_EMC_33_SEMC_DA11
+				0xf1	/* SEMC_D11 */
+			MXRT1050_IOMUXC_GPIO_EMC_34_SEMC_DA12
+				0xf1	/* SEMC_D12 */
+			MXRT1050_IOMUXC_GPIO_EMC_35_SEMC_DA13
+				0xf1	/* SEMC_D13 */
+			MXRT1050_IOMUXC_GPIO_EMC_36_SEMC_DA14
+				0xf1	/* SEMC_D14 */
+			MXRT1050_IOMUXC_GPIO_EMC_37_SEMC_DA15
+				0xf1	/* SEMC_D15 */
+			MXRT1050_IOMUXC_GPIO_EMC_38_SEMC_DM01
+				0xf1	/* SEMC_DM1 */
+			MXRT1050_IOMUXC_GPIO_EMC_39_SEMC_DQS
+				(IMX_PAD_SION | 0xf1)	/* SEMC_DQS */
+		>;
 		u-boot,dm-spl;
 	};
-};
 
-&iomuxc {
-	u-boot,dm-spl;
+	pinctrl_lcdif: lcdifgrp {
+		fsl,pins = <
+			MXRT1050_IOMUXC_GPIO_B0_00_LCD_CLK		0x1b0b1
+			MXRT1050_IOMUXC_GPIO_B0_01_LCD_ENABLE		0x1b0b1
+			MXRT1050_IOMUXC_GPIO_B0_02_LCD_HSYNC		0x1b0b1
+			MXRT1050_IOMUXC_GPIO_B0_03_LCD_VSYNC		0x1b0b1
+			MXRT1050_IOMUXC_GPIO_B0_04_LCD_DATA00		0x1b0b1
+			MXRT1050_IOMUXC_GPIO_B0_05_LCD_DATA01		0x1b0b1
+			MXRT1050_IOMUXC_GPIO_B0_06_LCD_DATA02		0x1b0b1
+			MXRT1050_IOMUXC_GPIO_B0_07_LCD_DATA03		0x1b0b1
+			MXRT1050_IOMUXC_GPIO_B0_08_LCD_DATA04		0x1b0b1
+			MXRT1050_IOMUXC_GPIO_B0_09_LCD_DATA05		0x1b0b1
+			MXRT1050_IOMUXC_GPIO_B0_10_LCD_DATA06		0x1b0b1
+			MXRT1050_IOMUXC_GPIO_B0_11_LCD_DATA07		0x1b0b1
+			MXRT1050_IOMUXC_GPIO_B0_12_LCD_DATA08		0x1b0b1
+			MXRT1050_IOMUXC_GPIO_B0_13_LCD_DATA09		0x1b0b1
+			MXRT1050_IOMUXC_GPIO_B0_14_LCD_DATA10		0x1b0b1
+			MXRT1050_IOMUXC_GPIO_B0_15_LCD_DATA11		0x1b0b1
+			MXRT1050_IOMUXC_GPIO_B1_01_LCD_DATA13		0x1b0b1
+			MXRT1050_IOMUXC_GPIO_B1_02_LCD_DATA14		0x1b0b1
+			MXRT1050_IOMUXC_GPIO_B1_03_LCD_DATA15		0x1b0b1
+			MXRT1050_IOMUXC_GPIO_B1_15_GPIO2_IO31		0x0b069
+			MXRT1050_IOMUXC_GPIO_AD_B0_02_GPIO1_IO02	0x0b069
+		>;
+	};
 
-	imxrt1050-evk {
+	pinctrl_lpuart1: lpuart1grp {
 		u-boot,dm-spl;
-		pinctrl_lpuart1: lpuart1grp {
-			u-boot,dm-spl;
-		};
+	};
 
-		pinctrl_semc: semcgrp {
-			u-boot,dm-spl;
-		};
+	pinctrl_usdhc0: usdhc0grp {
+		u-boot,dm-spl;
+	};
+ };
+
+&usdhc1 {
+	compatible = "fsl,imxrt-usdhc";
+	u-boot,dm-spl;
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <16>;
+		bus-width = <16>;
 
-		pinctrl_usdhc0: usdhc0grp {
-			u-boot,dm-spl;
+		display-timings {
+			timing0: timing0 {
+				clock-frequency = <9300000>;
+				hactive = <480>;
+				vactive = <272>;
+				hback-porch = <4>;
+				hfront-porch = <8>;
+				vback-porch = <4>;
+				vfront-porch = <8>;
+				hsync-len = <41>;
+				vsync-len = <10>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+			};
 		};
 	};
 };
 
-&usdhc1 {
-	u-boot,dm-spl;
+&usbotg1 {
+	dr_mode = "host";
+	status = "okay";
 };
arch/arm/dts/imxrt1050-evk.dts +31 -226

294 lines not on this page · raw message

arch/arm/dts/imxrt1050-pinfunc.h +1 -1
index a29031ab3d..22c14a3262 100644
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
 /*
  * Copyright (C) 2019
  * Author(s): Giulio Benetti <[email protected]>
arch/arm/dts/imxrt1050.dtsi +70 -98

248 lines not on this page · raw message

include/dt-bindings/clock/imxrt1050-clock.h +7 -2
index f74dbbcf93..93bef0832d 100644
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
 /*
  * Copyright(C) 2019
  * Author(s): Giulio Benetti <[email protected]>
@@ -62,6 +62,11 @@
 #define IMXRT1050_CLK_PLL7_USB_HOST		53
 #define IMXRT1050_CLK_LCDIF_PIX			54
 #define IMXRT1050_CLK_USBOH3			55
-#define IMXRT1050_CLK_END			56
+#define IMXRT1050_CLK_IPG_PDOF			56
+#define IMXRT1050_CLK_PER_CLK_SEL		57
+#define IMXRT1050_CLK_PER_PDOF			58
+#define IMXRT1050_CLK_DMA			59
+#define IMXRT1050_CLK_DMA_MUX			60
+#define IMXRT1050_CLK_END			61
 
 #endif /* __DT_BINDINGS_CLOCK_IMXRT1050_H */
Signature · 1 line
2.35.1
Reviewed-by Tested-by on v5 3/8
#6 lore raw

Re: [PATCH v5 3/8] imxrt1050: synchronise device tree with linux

Hi Marcel,

Quoted 10 lines · Marcel Ziswiler

From: Marcel Ziswiler <[email protected]>

Synchronise device tree with linux v6.1-rc3.

Note: Nowadays, the intent is for them regular device trees to just be synchronised from them Linux kernel device trees and any and all U-Boot specific changes need to go into the -u-boot.dtsi device tree include files which BTW get included automatically by the U-Boot build system.

and I've tested on the board and both lcd and usb works correctly so:

Thank you for the contribution!

Best regards

Signature · 2 lines
Giulio Benetti
CEO/CTO@Benetti Engineering sas
Quoted 957 lines

---

Changes in v5:
- Add clock-names "per" to lpuart and re-add lcdif and usb* nodes as pointed out by Giulio.

Changes in v4:
- Use imxrt1050-evk-u-boot.dtsi as provided/tested by Jesse.
- Explain intent in commit message as pointed out by Giulio.
- Re-synched with v6.1-rc3.

Changes in v3:
- Incorporate feedback from Jesse.

Changes in v2:
- imxrt1050: Re-added DDR timings aka semc node as pointed out by Fabio. Thanks!

  arch/arm/dts/imxrt1050-evk-u-boot.dtsi      | 274 ++++++++++++++++++--
  arch/arm/dts/imxrt1050-evk.dts              | 257 +++---------------
  arch/arm/dts/imxrt1050-pinfunc.h            |   2 +-
  arch/arm/dts/imxrt1050.dtsi                 | 168 +++++-------
  include/dt-bindings/clock/imxrt1050-clock.h |   9 +-
  5 files changed, 366 insertions(+), 344 deletions(-)
arch/arm/dts/imxrt1050-evk-u-boot.dtsi +257 -17
index 617cece448..e217dfd9eb 100644
@@ -4,9 +4,18 @@
   * Author(s): Giulio Benetti <[email protected]>
   */
 
+#include <dt-bindings/memory/imxrt-sdram.h>
+#include "imxrt1050-pinfunc.h"
+
  / {
+	aliases {
+		display0 = &lcdif;
+		usbphy0 = &usbphy1;
+	};
+
  	chosen {
  		u-boot,dm-spl;
+		tick-timer = &gpt;
  	};
 
  	clocks {
@@ -15,6 +24,92 @@
 
  	soc {
  		u-boot,dm-spl;
+
+		usbphy1: usbphy@400d9000 {
+			compatible = "fsl,imxrt-usbphy";
+			reg = <0x400d9000 0x1000>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		usbmisc: usbmisc@402e0800 {
+			#index-cells = <1>;
+			compatible = "fsl,imxrt-usbmisc";
+			reg = <0x402e0800 0x200>;
+			clocks = <&clks IMXRT1050_CLK_USBOH3>;
+		};
+
+		usbotg1: usb@402e0000 {
+			compatible = "fsl,imxrt-usb", "fsl,imx27-usb";
+			reg = <0x402e0000 0x200>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMXRT1050_CLK_USBOH3>;
+			fsl,usbphy = <&usbphy1>;
+			fsl,usbmisc = <&usbmisc 0>;
+			ahb-burst-config = <0x0>;
+			tx-burst-size-dword = <0x10>;
+			rx-burst-size-dword = <0x10>;
+			status = "disabled";
+		};
+
+		lcdif: lcdif@402b8000 {
+			compatible = "fsl,imxrt-lcdif";
+			reg = <0x402b8000 0x4000>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMXRT1050_CLK_LCDIF_PIX>,
+				 <&clks IMXRT1050_CLK_LCDIF_APB>;
+			clock-names = "pix", "axi";
+			assigned-clocks = <&clks IMXRT1050_CLK_LCDIF_SEL>;
+			assigned-clock-parents = <&clks IMXRT1050_CLK_PLL5_VIDEO>;
+			status = "disabled";
+		};
+
+		semc: semc@402f0000 {
+			compatible = "fsl,imxrt-semc";
+			reg = <0x402f0000 0x4000>;
+			clocks = <&clks IMXRT1050_CLK_SEMC>;
+			pinctrl-0 = <&pinctrl_semc>;
+			pinctrl-names = "default";
+			status = "okay";
+		};
+	};
+};
+
+&semc {
+	u-boot,dm-spl;
+	/*
+	 * Memory configuration from sdram datasheet IS42S16160J-6BLI
+	 */
+	fsl,sdram-mux = /bits/ 8 <MUX_A8_SDRAM_A8
+				MUX_CSX0_SDRAM_CS1
+				0
+				0
+				0
+				0>;
+	fsl,sdram-control = /bits/ 8 <MEM_WIDTH_16BITS
+					BL_8
+					COL_9BITS
+					CL_3>;
+	fsl,sdram-timing = /bits/ 8 <0x2
+				     0x2
+				     0x9
+				     0x1
+				     0x5
+				     0x6
+
+				     0x20
+				     0x09
+				     0x01
+				     0x00
+
+				     0x04
+				     0x0A
+				     0x21
+				     0x50>;
+
+	bank1: bank@0 {
+		fsl,base-address = <0x80000000>;
+		fsl,memory-size = <MEM_SIZE_32M>;
+		u-boot,dm-spl;
  	};
  };
 
@@ -31,60 +126,205 @@
  };
 
  &gpio1 {
+	compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
  	u-boot,dm-spl;
  };
 
  &gpio2 {
+	compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
  	u-boot,dm-spl;
  };
 
  &gpio3 {
+	compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
  	u-boot,dm-spl;
  };
 
  &gpio4 {
+	compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
  	u-boot,dm-spl;
  };
 
  &gpio5 {
+	compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
  	u-boot,dm-spl;
  };
 
-&gpt1 {
+&gpt {
+	clocks = <&osc>;
+	compatible = "fsl,imxrt-gpt";
+	status = "okay";
  	u-boot,dm-spl;
  };
 
  &lpuart1 { /* console */
+	compatible = "fsl,imxrt-lpuart";
+	clock-names = "per";
  	u-boot,dm-spl;
  };
 
-&semc {
+&iomuxc {
  	u-boot,dm-spl;
+	compatible = "fsl,imxrt-iomuxc";
+	pinctrl-0 = <&pinctrl_lpuart1>;
 
-	bank1: bank@0 {
+	pinctrl_semc: semcgrp {
+		fsl,pins = <
+			MXRT1050_IOMUXC_GPIO_EMC_00_SEMC_DA00
+				0xf1	/* SEMC_D0 */
+			MXRT1050_IOMUXC_GPIO_EMC_01_SEMC_DA01
+				0xf1	/* SEMC_D1 */
+			MXRT1050_IOMUXC_GPIO_EMC_02_SEMC_DA02
+				0xf1	/* SEMC_D2 */
+			MXRT1050_IOMUXC_GPIO_EMC_03_SEMC_DA03
+				0xf1	/* SEMC_D3 */
+			MXRT1050_IOMUXC_GPIO_EMC_04_SEMC_DA04
+				0xf1	/* SEMC_D4 */
+			MXRT1050_IOMUXC_GPIO_EMC_05_SEMC_DA05
+				0xf1	/* SEMC_D5 */
+			MXRT1050_IOMUXC_GPIO_EMC_06_SEMC_DA06
+				0xf1	/* SEMC_D6 */
+			MXRT1050_IOMUXC_GPIO_EMC_07_SEMC_DA07
+				0xf1	/* SEMC_D7 */
+			MXRT1050_IOMUXC_GPIO_EMC_08_SEMC_DM00
+				0xf1	/* SEMC_DM0 */
+			MXRT1050_IOMUXC_GPIO_EMC_09_SEMC_ADDR00
+				0xf1	/* SEMC_A0 */
+			MXRT1050_IOMUXC_GPIO_EMC_10_SEMC_ADDR01
+				0xf1	/* SEMC_A1 */
+			MXRT1050_IOMUXC_GPIO_EMC_11_SEMC_ADDR02
+				0xf1	/* SEMC_A2 */
+			MXRT1050_IOMUXC_GPIO_EMC_12_SEMC_ADDR03
+				0xf1	/* SEMC_A3 */
+			MXRT1050_IOMUXC_GPIO_EMC_13_SEMC_ADDR04
+				0xf1	/* SEMC_A4 */
+			MXRT1050_IOMUXC_GPIO_EMC_14_SEMC_ADDR05
+				0xf1	/* SEMC_A5 */
+			MXRT1050_IOMUXC_GPIO_EMC_15_SEMC_ADDR06
+				0xf1	/* SEMC_A6 */
+			MXRT1050_IOMUXC_GPIO_EMC_16_SEMC_ADDR07
+				0xf1	/* SEMC_A7 */
+			MXRT1050_IOMUXC_GPIO_EMC_17_SEMC_ADDR08
+				0xf1	/* SEMC_A8 */
+			MXRT1050_IOMUXC_GPIO_EMC_18_SEMC_ADDR09
+				0xf1	/* SEMC_A9 */
+			MXRT1050_IOMUXC_GPIO_EMC_19_SEMC_ADDR11
+				0xf1	/* SEMC_A11 */
+			MXRT1050_IOMUXC_GPIO_EMC_20_SEMC_ADDR12
+				0xf1	/* SEMC_A12 */
+			MXRT1050_IOMUXC_GPIO_EMC_21_SEMC_BA0
+				0xf1	/* SEMC_BA0 */
+			MXRT1050_IOMUXC_GPIO_EMC_22_SEMC_BA1
+				0xf1	/* SEMC_BA1 */
+			MXRT1050_IOMUXC_GPIO_EMC_23_SEMC_ADDR10
+				0xf1	/* SEMC_A10 */
+			MXRT1050_IOMUXC_GPIO_EMC_24_SEMC_CAS
+				0xf1	/* SEMC_CAS */
+			MXRT1050_IOMUXC_GPIO_EMC_25_SEMC_RAS
+				0xf1	/* SEMC_RAS */
+			MXRT1050_IOMUXC_GPIO_EMC_26_SEMC_CLK
+				0xf1	/* SEMC_CLK */
+			MXRT1050_IOMUXC_GPIO_EMC_27_SEMC_CKE
+				0xf1	/* SEMC_CKE */
+			MXRT1050_IOMUXC_GPIO_EMC_28_SEMC_WE
+				0xf1	/* SEMC_WE */
+			MXRT1050_IOMUXC_GPIO_EMC_29_SEMC_CS0
+				0xf1	/* SEMC_CS0 */
+			MXRT1050_IOMUXC_GPIO_EMC_30_SEMC_DA08
+				0xf1	/* SEMC_D8 */
+			MXRT1050_IOMUXC_GPIO_EMC_31_SEMC_DA09
+				0xf1	/* SEMC_D9 */
+			MXRT1050_IOMUXC_GPIO_EMC_32_SEMC_DA10
+				0xf1	/* SEMC_D10 */
+			MXRT1050_IOMUXC_GPIO_EMC_33_SEMC_DA11
+				0xf1	/* SEMC_D11 */
+			MXRT1050_IOMUXC_GPIO_EMC_34_SEMC_DA12
+				0xf1	/* SEMC_D12 */
+			MXRT1050_IOMUXC_GPIO_EMC_35_SEMC_DA13
+				0xf1	/* SEMC_D13 */
+			MXRT1050_IOMUXC_GPIO_EMC_36_SEMC_DA14
+				0xf1	/* SEMC_D14 */
+			MXRT1050_IOMUXC_GPIO_EMC_37_SEMC_DA15
+				0xf1	/* SEMC_D15 */
+			MXRT1050_IOMUXC_GPIO_EMC_38_SEMC_DM01
+				0xf1	/* SEMC_DM1 */
+			MXRT1050_IOMUXC_GPIO_EMC_39_SEMC_DQS
+				(IMX_PAD_SION | 0xf1)	/* SEMC_DQS */
+		>;
  		u-boot,dm-spl;
  	};
-};
 
-&iomuxc {
-	u-boot,dm-spl;
+	pinctrl_lcdif: lcdifgrp {
+		fsl,pins = <
+			MXRT1050_IOMUXC_GPIO_B0_00_LCD_CLK		0x1b0b1
+			MXRT1050_IOMUXC_GPIO_B0_01_LCD_ENABLE		0x1b0b1
+			MXRT1050_IOMUXC_GPIO_B0_02_LCD_HSYNC		0x1b0b1
+			MXRT1050_IOMUXC_GPIO_B0_03_LCD_VSYNC		0x1b0b1
+			MXRT1050_IOMUXC_GPIO_B0_04_LCD_DATA00		0x1b0b1
+			MXRT1050_IOMUXC_GPIO_B0_05_LCD_DATA01		0x1b0b1
+			MXRT1050_IOMUXC_GPIO_B0_06_LCD_DATA02		0x1b0b1
+			MXRT1050_IOMUXC_GPIO_B0_07_LCD_DATA03		0x1b0b1
+			MXRT1050_IOMUXC_GPIO_B0_08_LCD_DATA04		0x1b0b1
+			MXRT1050_IOMUXC_GPIO_B0_09_LCD_DATA05		0x1b0b1
+			MXRT1050_IOMUXC_GPIO_B0_10_LCD_DATA06		0x1b0b1
+			MXRT1050_IOMUXC_GPIO_B0_11_LCD_DATA07		0x1b0b1
+			MXRT1050_IOMUXC_GPIO_B0_12_LCD_DATA08		0x1b0b1
+			MXRT1050_IOMUXC_GPIO_B0_13_LCD_DATA09		0x1b0b1
+			MXRT1050_IOMUXC_GPIO_B0_14_LCD_DATA10		0x1b0b1
+			MXRT1050_IOMUXC_GPIO_B0_15_LCD_DATA11		0x1b0b1
+			MXRT1050_IOMUXC_GPIO_B1_01_LCD_DATA13		0x1b0b1
+			MXRT1050_IOMUXC_GPIO_B1_02_LCD_DATA14		0x1b0b1
+			MXRT1050_IOMUXC_GPIO_B1_03_LCD_DATA15		0x1b0b1
+			MXRT1050_IOMUXC_GPIO_B1_15_GPIO2_IO31		0x0b069
+			MXRT1050_IOMUXC_GPIO_AD_B0_02_GPIO1_IO02	0x0b069
+		>;
+	};
 
-	imxrt1050-evk {
+	pinctrl_lpuart1: lpuart1grp {
  		u-boot,dm-spl;
-		pinctrl_lpuart1: lpuart1grp {
-			u-boot,dm-spl;
-		};
+	};
 
-		pinctrl_semc: semcgrp {
-			u-boot,dm-spl;
-		};
+	pinctrl_usdhc0: usdhc0grp {
+		u-boot,dm-spl;
+	};
+ };
+
+&usdhc1 {
+	compatible = "fsl,imxrt-usdhc";
+	u-boot,dm-spl;
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <16>;
+		bus-width = <16>;
 
-		pinctrl_usdhc0: usdhc0grp {
-			u-boot,dm-spl;
+		display-timings {
+			timing0: timing0 {
+				clock-frequency = <9300000>;
+				hactive = <480>;
+				vactive = <272>;
+				hback-porch = <4>;
+				hfront-porch = <8>;
+				vback-porch = <4>;
+				vfront-porch = <8>;
+				hsync-len = <41>;
+				vsync-len = <10>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+			};
  		};
  	};
  };
 
-&usdhc1 {
-	u-boot,dm-spl;
+&usbotg1 {
+	dr_mode = "host";
+	status = "okay";
  };
arch/arm/dts/imxrt1050-evk.dts +31 -226
index fb2da3adfc..6a9c10decf 100644
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
  /*
   * Copyright (C) 2019
   * Author(s): Giulio Benetti <[email protected]>
@@ -6,7 +6,6 @@
 
  /dts-v1/;
  #include "imxrt1050.dtsi"
-#include "imxrt1050-evk-u-boot.dtsi"
  #include "imxrt1050-pinfunc.h"
 
  / {
@@ -14,210 +13,52 @@
  	compatible = "fsl,imxrt1050-evk", "fsl,imxrt1050";
 
  	chosen {
-		bootargs = "root=/dev/ram";
-		stdout-path = "serial0:115200n8";
-		tick-timer = &gpt1;
+		stdout-path = &lpuart1;
  	};
 
-	memory {
+	aliases {
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		mmc0 = &usdhc1;
+		serial0 = &lpuart1;
+	};
+
+	memory@80000000 {
  		device_type = "memory";
  		reg = <0x80000000 0x2000000>;
  	};
  };
 
-&lpuart1 { /* console */
+&lpuart1 {
  	pinctrl-names = "default";
  	pinctrl-0 = <&pinctrl_lpuart1>;
  	status = "okay";
  };
 
-&semc {
-	/*
-	 * Memory configuration from sdram datasheet IS42S16160J-6BLI
-	 */
-	fsl,sdram-mux = /bits/ 8 <MUX_A8_SDRAM_A8
-				MUX_CSX0_SDRAM_CS1
-				0
-				0
-				0
-				0>;
-	fsl,sdram-control = /bits/ 8 <MEM_WIDTH_16BITS
-					BL_8
-					COL_9BITS
-					CL_3>;
-	fsl,sdram-timing = /bits/ 8 <0x2
-				     0x2
-				     0x9
-				     0x1
-				     0x5
-				     0x6
-
-				     0x20
-				     0x09
-				     0x01
-				     0x00
-
-				     0x04
-				     0x0A
-				     0x21
-				     0x50>;
-
-	bank1: bank@0 {
-		fsl,base-address = <0x80000000>;
-		fsl,memory-size = <MEM_SIZE_32M>;
-	};
-};
-
  &iomuxc {
  	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lpuart1>;
-
-	imxrt1050-evk {
-		pinctrl_lpuart1: lpuart1grp {
-			fsl,pins = <
-				MXRT1050_IOMUXC_GPIO_AD_B0_12_LPUART1_TXD
-					0xf1
-				MXRT1050_IOMUXC_GPIO_AD_B0_13_LPUART1_RXD
-					0xf1
-			>;
-		};
-
-		pinctrl_semc: semcgrp {
-			fsl,pins = <
-				MXRT1050_IOMUXC_GPIO_EMC_00_SEMC_DA00
-					0xf1	/* SEMC_D0 */
-				MXRT1050_IOMUXC_GPIO_EMC_01_SEMC_DA01
-					0xf1	/* SEMC_D1 */
-				MXRT1050_IOMUXC_GPIO_EMC_02_SEMC_DA02
-					0xf1	/* SEMC_D2 */
-				MXRT1050_IOMUXC_GPIO_EMC_03_SEMC_DA03
-					0xf1	/* SEMC_D3 */
-				MXRT1050_IOMUXC_GPIO_EMC_04_SEMC_DA04
-					0xf1	/* SEMC_D4 */
-				MXRT1050_IOMUXC_GPIO_EMC_05_SEMC_DA05
-					0xf1	/* SEMC_D5 */
-				MXRT1050_IOMUXC_GPIO_EMC_06_SEMC_DA06
-					0xf1	/* SEMC_D6 */
-				MXRT1050_IOMUXC_GPIO_EMC_07_SEMC_DA07
-					0xf1	/* SEMC_D7 */
-				MXRT1050_IOMUXC_GPIO_EMC_08_SEMC_DM00
-					0xf1	/* SEMC_DM0 */
-				MXRT1050_IOMUXC_GPIO_EMC_09_SEMC_ADDR00
-					0xf1	/* SEMC_A0 */
-				MXRT1050_IOMUXC_GPIO_EMC_10_SEMC_ADDR01
-					0xf1	/* SEMC_A1 */
-				MXRT1050_IOMUXC_GPIO_EMC_11_SEMC_ADDR02
-					0xf1	/* SEMC_A2 */
-				MXRT1050_IOMUXC_GPIO_EMC_12_SEMC_ADDR03
-					0xf1	/* SEMC_A3 */
-				MXRT1050_IOMUXC_GPIO_EMC_13_SEMC_ADDR04
-					0xf1	/* SEMC_A4 */
-				MXRT1050_IOMUXC_GPIO_EMC_14_SEMC_ADDR05
-					0xf1	/* SEMC_A5 */
-				MXRT1050_IOMUXC_GPIO_EMC_15_SEMC_ADDR06
-					0xf1	/* SEMC_A6 */
-				MXRT1050_IOMUXC_GPIO_EMC_16_SEMC_ADDR07
-					0xf1	/* SEMC_A7 */
-				MXRT1050_IOMUXC_GPIO_EMC_17_SEMC_ADDR08
-					0xf1	/* SEMC_A8 */
-				MXRT1050_IOMUXC_GPIO_EMC_18_SEMC_ADDR09
-					0xf1	/* SEMC_A9 */
-				MXRT1050_IOMUXC_GPIO_EMC_19_SEMC_ADDR11
-					0xf1	/* SEMC_A11 */
-				MXRT1050_IOMUXC_GPIO_EMC_20_SEMC_ADDR12
-					0xf1	/* SEMC_A12 */
-				MXRT1050_IOMUXC_GPIO_EMC_21_SEMC_BA0
-					0xf1	/* SEMC_BA0 */
-				MXRT1050_IOMUXC_GPIO_EMC_22_SEMC_BA1
-					0xf1	/* SEMC_BA1 */
-				MXRT1050_IOMUXC_GPIO_EMC_23_SEMC_ADDR10
-					0xf1	/* SEMC_A10 */
-				MXRT1050_IOMUXC_GPIO_EMC_24_SEMC_CAS
-					0xf1	/* SEMC_CAS */
-				MXRT1050_IOMUXC_GPIO_EMC_25_SEMC_RAS
-					0xf1	/* SEMC_RAS */
-				MXRT1050_IOMUXC_GPIO_EMC_26_SEMC_CLK
-					0xf1	/* SEMC_CLK */
-				MXRT1050_IOMUXC_GPIO_EMC_27_SEMC_CKE
-					0xf1	/* SEMC_CKE */
-				MXRT1050_IOMUXC_GPIO_EMC_28_SEMC_WE
-					0xf1	/* SEMC_WE */
-				MXRT1050_IOMUXC_GPIO_EMC_29_SEMC_CS0
-					0xf1	/* SEMC_CS0 */
-				MXRT1050_IOMUXC_GPIO_EMC_30_SEMC_DA08
-					0xf1	/* SEMC_D8 */
-				MXRT1050_IOMUXC_GPIO_EMC_31_SEMC_DA09
-					0xf1	/* SEMC_D9 */
-				MXRT1050_IOMUXC_GPIO_EMC_32_SEMC_DA10
-					0xf1	/* SEMC_D10 */
-				MXRT1050_IOMUXC_GPIO_EMC_33_SEMC_DA11
-					0xf1	/* SEMC_D11 */
-				MXRT1050_IOMUXC_GPIO_EMC_34_SEMC_DA12
-					0xf1	/* SEMC_D12 */
-				MXRT1050_IOMUXC_GPIO_EMC_35_SEMC_DA13
-					0xf1	/* SEMC_D13 */
-				MXRT1050_IOMUXC_GPIO_EMC_36_SEMC_DA14
-					0xf1	/* SEMC_D14 */
-				MXRT1050_IOMUXC_GPIO_EMC_37_SEMC_DA15
-					0xf1	/* SEMC_D15 */
-				MXRT1050_IOMUXC_GPIO_EMC_38_SEMC_DM01
-					0xf1	/* SEMC_DM1 */
-				MXRT1050_IOMUXC_GPIO_EMC_39_SEMC_DQS
-					(IMX_PAD_SION | 0xf1)	/* SEMC_DQS */
-			>;
-		};
-
-		pinctrl_usdhc0: usdhc0grp {
-			fsl,pins = <
-				MXRT1050_IOMUXC_GPIO_B1_12_USDHC1_CD_B
-					0x1B000
-				MXRT1050_IOMUXC_GPIO_B1_14_USDHC1_VSELECT
-					0xB069
-				MXRT1050_IOMUXC_GPIO_SD_B0_00_USDHC1_CMD
-					0x17061
-				MXRT1050_IOMUXC_GPIO_SD_B0_01_USDHC1_CLK
-					0x17061
-				MXRT1050_IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3
-					0x17061
-				MXRT1050_IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2
-					0x17061
-				MXRT1050_IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1
-					0x17061
-				MXRT1050_IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0
-					0x17061
-			>;
-		};
-
-		pinctrl_lcdif: lcdifgrp {
-			fsl,pins = <
-				MXRT1050_IOMUXC_GPIO_B0_00_LCD_CLK		0x1b0b1
-				MXRT1050_IOMUXC_GPIO_B0_01_LCD_ENABLE		0x1b0b1
-				MXRT1050_IOMUXC_GPIO_B0_02_LCD_HSYNC		0x1b0b1
-				MXRT1050_IOMUXC_GPIO_B0_03_LCD_VSYNC		0x1b0b1
-				MXRT1050_IOMUXC_GPIO_B0_04_LCD_DATA00		0x1b0b1
-				MXRT1050_IOMUXC_GPIO_B0_05_LCD_DATA01		0x1b0b1
-				MXRT1050_IOMUXC_GPIO_B0_06_LCD_DATA02		0x1b0b1
-				MXRT1050_IOMUXC_GPIO_B0_07_LCD_DATA03		0x1b0b1
-				MXRT1050_IOMUXC_GPIO_B0_08_LCD_DATA04		0x1b0b1
-				MXRT1050_IOMUXC_GPIO_B0_09_LCD_DATA05		0x1b0b1
-				MXRT1050_IOMUXC_GPIO_B0_10_LCD_DATA06		0x1b0b1
-				MXRT1050_IOMUXC_GPIO_B0_11_LCD_DATA07		0x1b0b1
-				MXRT1050_IOMUXC_GPIO_B0_12_LCD_DATA08		0x1b0b1
-				MXRT1050_IOMUXC_GPIO_B0_13_LCD_DATA09		0x1b0b1
-				MXRT1050_IOMUXC_GPIO_B0_14_LCD_DATA10		0x1b0b1
-				MXRT1050_IOMUXC_GPIO_B0_15_LCD_DATA11		0x1b0b1
-				MXRT1050_IOMUXC_GPIO_B1_01_LCD_DATA13		0x1b0b1
-				MXRT1050_IOMUXC_GPIO_B1_02_LCD_DATA14		0x1b0b1
-				MXRT1050_IOMUXC_GPIO_B1_03_LCD_DATA15		0x1b0b1
-				MXRT1050_IOMUXC_GPIO_B1_15_GPIO2_IO31		0x0b069
-				MXRT1050_IOMUXC_GPIO_AD_B0_02_GPIO1_IO02	0x0b069
-			>;
-		};
+	pinctrl_lpuart1: lpuart1grp {
+		fsl,pins = <
+			MXRT1050_IOMUXC_GPIO_AD_B0_12_LPUART1_TXD	0xf1
+			MXRT1050_IOMUXC_GPIO_AD_B0_13_LPUART1_RXD	0xf1
+		>;
  	};
-};
 
-&gpt1 {
-	status = "okay";
+	pinctrl_usdhc0: usdhc0grp {
+		fsl,pins = <
+			MXRT1050_IOMUXC_GPIO_B1_12_USDHC1_CD_B		0x1B000
+			MXRT1050_IOMUXC_GPIO_B1_14_USDHC1_VSELECT	0xB069
+			MXRT1050_IOMUXC_GPIO_SD_B0_00_USDHC1_CMD	0x17061
+			MXRT1050_IOMUXC_GPIO_SD_B0_01_USDHC1_CLK	0x17061
+			MXRT1050_IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3	0x17061
+			MXRT1050_IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2	0x17061
+			MXRT1050_IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1	0x17061
+			MXRT1050_IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0	0x17061
+		>;
+	};
  };
 
  &usdhc1 {
@@ -226,42 +67,6 @@
  	pinctrl-1 = <&pinctrl_usdhc0>;
  	pinctrl-2 = <&pinctrl_usdhc0>;
  	pinctrl-3 = <&pinctrl_usdhc0>;
-	status = "okay";
-
  	cd-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lcdif>;
-	display = <&display0>;
-	status = "okay";
-
-	display0: display0 {
-		bits-per-pixel = <16>;
-		bus-width = <16>;
-
-		display-timings {
-			timing0: timing0 {
-				clock-frequency = <9300000>;
-				hactive = <480>;
-				vactive = <272>;
-				hback-porch = <4>;
-				hfront-porch = <8>;
-				vback-porch = <4>;
-				vfront-porch = <8>;
-				hsync-len = <41>;
-				vsync-len = <10>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-			};
-		};
-	};
-};
-
-&usbotg1 {
-	dr_mode = "host";
  	status = "okay";
  };
arch/arm/dts/imxrt1050-pinfunc.h +1 -1
index a29031ab3d..22c14a3262 100644
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
  /*
   * Copyright (C) 2019
   * Author(s): Giulio Benetti <[email protected]>
arch/arm/dts/imxrt1050.dtsi +70 -98
index 09f4712af6..03e6a858a7 100644
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
  /*
   * Copyright (C) 2019
   * Author(s): Giulio Benetti <[email protected]>
@@ -8,53 +8,37 @@
  #include <dt-bindings/interrupt-controller/arm-gic.h>
  #include <dt-bindings/clock/imxrt1050-clock.h>
  #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/memory/imxrt-sdram.h>
 
  / {
  	#address-cells = <1>;
  	#size-cells = <1>;
 
-	aliases {
-		display0 = &lcdif;
-		gpio0 = &gpio1;
-		gpio1 = &gpio2;
-		gpio2 = &gpio3;
-		gpio3 = &gpio4;
-		gpio4 = &gpio5;
-		mmc0 = &usdhc1;
-		serial0 = &lpuart1;
-		usbphy0 = &usbphy1;
-	};
-
  	clocks {
  		osc: osc {
-			compatible = "fsl,imx-osc", "fixed-clock";
+			compatible = "fixed-clock";
  			#clock-cells = <0>;
  			clock-frequency = <24000000>;
  		};
-	};
 
-	soc {
-		semc: semc@402f0000 {
-			compatible = "fsl,imxrt-semc";
-			reg = <0x402f0000 0x4000>;
-			clocks = <&clks IMXRT1050_CLK_SEMC>;
-			pinctrl-0 = <&pinctrl_semc>;
-			pinctrl-names = "default";
-			status = "okay";
+		osc3M: osc3M {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <3000000>;
  		};
+	};
 
+	soc {
  		lpuart1: serial@40184000 {
-			compatible = "fsl,imxrt-lpuart";
+			compatible = "fsl,imxrt1050-lpuart", "fsl,imx7ulp-lpuart";
  			reg = <0x40184000 0x4000>;
-			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <20>;
  			clocks = <&clks IMXRT1050_CLK_LPUART1>;
-			clock-names = "per";
+			clock-names = "ipg";
  			status = "disabled";
  		};
 
-		iomuxc: iomuxc@401f8000 {
-			compatible = "fsl,imxrt-iomuxc";
+		iomuxc: pinctrl@401f8000 {
+			compatible = "fsl,imxrt1050-iomuxc";
  			reg = <0x401f8000 0x4000>;
  			fsl,mux_mask = <0x7>;
  		};
@@ -64,31 +48,61 @@
  			reg = <0x400d8000 0x4000>;
  		};
 
-		clks: ccm@400fc000 {
+		clks: clock-controller@400fc000 {
  			compatible = "fsl,imxrt1050-ccm";
  			reg = <0x400fc000 0x4000>;
-			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <95>, <96>;
+			clocks = <&osc>;
+			clock-names = "osc";
  			#clock-cells = <1>;
-		};
-
-		usdhc1: usdhc@402c0000 {
-			compatible = "fsl,imxrt-usdhc";
-			reg = <0x402c0000 0x10000>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clks IMXRT1050_CLK_USDHC1>;
-			clock-names = "per";
+			assigned-clocks = <&clks IMXRT1050_CLK_PLL1_BYPASS>,
+				<&clks IMXRT1050_CLK_PLL1_BYPASS>,
+				<&clks IMXRT1050_CLK_PLL2_BYPASS>,
+				<&clks IMXRT1050_CLK_PLL3_BYPASS>,
+				<&clks IMXRT1050_CLK_PLL3_PFD1_664_62M>,
+				<&clks IMXRT1050_CLK_PLL2_PFD2_396M>;
+			assigned-clock-parents = <&clks IMXRT1050_CLK_PLL1_REF_SEL>,
+				<&clks IMXRT1050_CLK_PLL1_ARM>,
+				<&clks IMXRT1050_CLK_PLL2_SYS>,
+				<&clks IMXRT1050_CLK_PLL3_USB_OTG>,
+				<&clks IMXRT1050_CLK_PLL3_USB_OTG>,
+				<&clks IMXRT1050_CLK_PLL2_SYS>;
+		};
+
+		edma1: dma-controller@400e8000 {
+			#dma-cells = <2>;
+			compatible = "fsl,imx7ulp-edma";
+			reg = <0x400e8000 0x4000>,
+				<0x400ec000 0x4000>;
+			dma-channels = <32>;
+			interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>, <8>,
+				<9>, <10>, <11>, <12>, <13>, <14>, <15>, <16>;
+			clock-names = "dma", "dmamux0";
+			clocks = <&clks IMXRT1050_CLK_DMA>,
+				 <&clks IMXRT1050_CLK_DMA_MUX>;
+		};
+
+		usdhc1: mmc@402c0000 {
+			compatible = "fsl,imxrt1050-usdhc", "fsl,imx6sl-usdhc";
+			reg = <0x402c0000 0x4000>;
+			interrupts = <110>;
+			clocks = <&clks IMXRT1050_CLK_IPG_PDOF>,
+				<&clks IMXRT1050_CLK_OSC>,
+				<&clks IMXRT1050_CLK_USDHC1>;
+			clock-names = "ipg", "ahb", "per";
  			bus-width = <4>;
+			fsl,wp-controller;
+			no-1-8-v;
+			max-frequency = <4000000>;
  			fsl,tuning-start-tap = <20>;
-			fsl,tuning-step= <2>;
+			fsl,tuning-step = <2>;
  			status = "disabled";
  		};
 
  		gpio1: gpio@401b8000 {
-			compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
+			compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
  			reg = <0x401b8000 0x4000>;
-			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <80>, <81>;
  			gpio-controller;
  			#gpio-cells = <2>;
  			interrupt-controller;
@@ -96,10 +110,9 @@
  		};
 
  		gpio2: gpio@401bc000 {
-			compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
+			compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
  			reg = <0x401bc000 0x4000>;
-			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <82>, <83>;
  			gpio-controller;
  			#gpio-cells = <2>;
  			interrupt-controller;
@@ -107,10 +120,9 @@
  		};
 
  		gpio3: gpio@401c0000 {
-			compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
+			compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
  			reg = <0x401c0000 0x4000>;
-			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <84>, <85>;
  			gpio-controller;
  			#gpio-cells = <2>;
  			interrupt-controller;
@@ -118,10 +130,9 @@
  		};
 
  		gpio4: gpio@401c4000 {
-			compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
+			compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
  			reg = <0x401c4000 0x4000>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <86>, <87>;
  			gpio-controller;
  			#gpio-cells = <2>;
  			interrupt-controller;
@@ -129,60 +140,21 @@
  		};
 
  		gpio5: gpio@400c0000 {
-			compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
+			compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
  			reg = <0x400c0000 0x4000>;
-			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <88>, <89>;
  			gpio-controller;
  			#gpio-cells = <2>;
  			interrupt-controller;
  			#interrupt-cells = <2>;
  		};
 
-		lcdif: lcdif@402b8000 {
-			compatible = "fsl,imxrt-lcdif";
-			reg = <0x402b8000 0x4000>;
-			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clks IMXRT1050_CLK_LCDIF_PIX>,
-				 <&clks IMXRT1050_CLK_LCDIF_APB>;
-			clock-names = "pix", "axi";
-			assigned-clocks = <&clks IMXRT1050_CLK_LCDIF_SEL>;
-			assigned-clock-parents = <&clks IMXRT1050_CLK_PLL5_VIDEO>;
-			status = "disabled";
-		};
-
-		gpt1: gpt1@401ec000 {
-			compatible = "fsl,imxrt-gpt";
+		gpt: timer@401ec000 {
+			compatible = "fsl,imxrt1050-gpt", "fsl,imx6dl-gpt", "fsl,imx6sl-gpt";
  			reg = <0x401ec000 0x4000>;
  			interrupts = <100>;
-			clocks = <&osc>;
-			status = "disabled";
-		};
-
-		usbphy1: usbphy@400d9000 {
-			compatible = "fsl,imxrt-usbphy";
-			reg = <0x400d9000 0x1000>;
-			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		usbmisc: usbmisc@402e0800 {
-			#index-cells = <1>;
-			compatible = "fsl,imxrt-usbmisc";
-			reg = <0x402e0800 0x200>;
-			clocks = <&clks IMXRT1050_CLK_USBOH3>;
-		};
-
-		usbotg1: usb@402e0000 {
-			compatible = "fsl,imxrt-usb", "fsl,imx27-usb";
-			reg = <0x402e0000 0x200>;
-			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clks IMXRT1050_CLK_USBOH3>;
-			fsl,usbphy = <&usbphy1>;
-			fsl,usbmisc = <&usbmisc 0>;
-			ahb-burst-config = <0x0>;
-			tx-burst-size-dword = <0x10>;
-			rx-burst-size-dword = <0x10>;
-			status = "disabled";
+			clocks = <&osc3M>;
+			clock-names = "per";
  		};
  	};
  };
include/dt-bindings/clock/imxrt1050-clock.h +7 -2
index f74dbbcf93..93bef0832d 100644
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
  /*
   * Copyright(C) 2019
   * Author(s): Giulio Benetti <[email protected]>
@@ -62,6 +62,11 @@
  #define IMXRT1050_CLK_PLL7_USB_HOST		53
  #define IMXRT1050_CLK_LCDIF_PIX			54
  #define IMXRT1050_CLK_USBOH3			55
-#define IMXRT1050_CLK_END			56
+#define IMXRT1050_CLK_IPG_PDOF			56
+#define IMXRT1050_CLK_PER_CLK_SEL		57
+#define IMXRT1050_CLK_PER_PDOF			58
+#define IMXRT1050_CLK_DMA			59
+#define IMXRT1050_CLK_DMA_MUX			60
+#define IMXRT1050_CLK_END			61
 
  #endif /* __DT_BINDINGS_CLOCK_IMXRT1050_H */
#7 lore raw

PATCH v5 3/8 imxrt1050: synchronise device tree with linux

In reply to Marcel Ziswiler
Quoted 7 lines

From: Marcel Ziswiler <[email protected]> Synchronise device tree with linux v6.1-rc3.
Note: Nowadays, the intent is for them regular device trees to just be synchronised from them Linux kernel device trees and any and all U-Boot specific changes need to go into the -u-boot.dtsi device tree include files which BTW get included automatically by the U-Boot build system.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================
#8 lore raw

PATCH v5 4/8 imx8ulp: synchronise device tree with linux

In reply to Marcel Ziswiler

From: Marcel Ziswiler <[email protected]>

Synchronise device tree with linux v6.1-rc3.

---

(no changes since v4)

Changes in v4:
- Re-synched with v6.1-rc3.

Changes in v2:
- imx8ulp: Re-added s400_mu device tree node.

 arch/arm/dts/imx8ulp-evk-u-boot.dtsi          |  15 +-
 arch/arm/dts/imx8ulp-evk.dts                  | 240 ++-----
 arch/arm/dts/imx8ulp-pinfunc.h                |   4 +-
 arch/arm/dts/imx8ulp.dtsi                     | 594 +++++-------------
 include/dt-bindings/clock/imx8ulp-clock.h     |  53 +-
 include/dt-bindings/power/imx8ulp-power.h     |  26 +
 include/dt-bindings/reset/imx8ulp-pcc-reset.h |  59 ++
 7 files changed, 369 insertions(+), 622 deletions(-)
 create mode 100644 include/dt-bindings/power/imx8ulp-power.h
 create mode 100644 include/dt-bindings/reset/imx8ulp-pcc-reset.h
arch/arm/dts/imx8ulp-evk-u-boot.dtsi +10 -5
index 7c1dab2acf..ad264f271e 100644
@@ -3,7 +3,16 @@
  * Copyright 2021 NXP
  */
 
-&{/soc@0} {
+/ {
+	mu@27020000 {
+		compatible = "fsl,imx8ulp-mu";
+		reg = <0 0x27020000 0 0x10000>;
+		status = "okay";
+		u-boot,dm-spl;
+	};
+};
+
+&soc {
 	u-boot,dm-spl;
 };
 
@@ -23,10 +32,6 @@
 	u-boot,dm-spl;
 };
 
-&s400_mu {
-	u-boot,dm-spl;
-};
-
 &lpuart5 {
 	u-boot,dm-spl;
 };
arch/arm/dts/imx8ulp-evk.dts +69 -171

279 lines not on this page · raw message

arch/arm/dts/imx8ulp-pinfunc.h +2 -2
index c21c3b644e..b204ac79b4 100644
@@ -1,6 +1,6 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
+/* SPDX-License-Identifier: GPL-2.0+ OR MIT */
 /*
- * Copyright 2020 NXP
+ * Copyright 2021 NXP
  */
 
 #ifndef __DTS_IMX8ULP_PINFUNC_H
arch/arm/dts/imx8ulp.dtsi +171 -423

808 lines not on this page · raw message

include/dt-bindings/clock/imx8ulp-clock.h +32 -21

110 lines not on this page · raw message

include/dt-bindings/power/imx8ulp-power.h new file +26 -0
new file mode 100644
index 0000000000..a556b2e96d
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+/*
+ *  Copyright 2021 NXP
+ */
+
+#ifndef __DT_BINDINGS_IMX8ULP_POWER_H__
+#define __DT_BINDINGS_IMX8ULP_POWER_H__
+
+#define IMX8ULP_PD_DMA1		0
+#define IMX8ULP_PD_FLEXSPI2	1
+#define IMX8ULP_PD_USB0		2
+#define IMX8ULP_PD_USDHC0	3
+#define IMX8ULP_PD_USDHC1	4
+#define IMX8ULP_PD_USDHC2_USB1	5
+#define IMX8ULP_PD_DCNANO	6
+#define IMX8ULP_PD_EPDC		7
+#define IMX8ULP_PD_DMA2		8
+#define IMX8ULP_PD_GPU2D	9
+#define IMX8ULP_PD_GPU3D	10
+#define IMX8ULP_PD_HIFI4	11
+#define IMX8ULP_PD_ISI		12
+#define IMX8ULP_PD_MIPI_CSI	13
+#define IMX8ULP_PD_MIPI_DSI	14
+#define IMX8ULP_PD_PXP		15
+
+#endif
include/dt-bindings/reset/imx8ulp-pcc-reset.h new file +59 -0

59 lines not on this page · raw message

Signature · 1 line
2.35.1
#9 lore raw

PATCH v5 4/8 imx8ulp: synchronise device tree with linux

Quoted 3 lines

From: Marcel Ziswiler <[email protected]> Synchronise device tree with linux v6.1-rc3.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================
#10 lore raw

PATCH v5 5/8 imx8mq: synchronise device tree with linux

In reply to Marcel Ziswiler

From: Marcel Ziswiler <[email protected]>

Synchronise device tree with linux v6.1-rc3.

---

(no changes since v4)

Changes in v4:
- Re-synched with v6.1-rc3.

 arch/arm/dts/imx8mq-evk.dts              |  43 +++++++
 arch/arm/dts/imx8mq-librem5-r3.dtsi      |  45 +++++++
 arch/arm/dts/imx8mq-librem5-r4.dts       |  20 +--
 arch/arm/dts/imx8mq-librem5.dtsi         | 153 +++++++++++++++++++++--
 arch/arm/dts/imx8mq-u-boot.dtsi          |  10 +-
 arch/arm/dts/imx8mq.dtsi                 |  19 +--
 include/dt-bindings/reset/imx8mq-reset.h |  61 ++++-----
 7 files changed, 281 insertions(+), 70 deletions(-)
 create mode 100644 arch/arm/dts/imx8mq-librem5-r3.dtsi
arch/arm/dts/imx8mq-evk.dts +43 -0
index 99fed35168..82387b9cb8 100644
@@ -71,12 +71,36 @@
 		linux,autosuspend-period = <125>;
 	};
 
+	audio_codec_bt_sco: audio-codec-bt-sco {
+		compatible = "linux,bt-sco";
+		#sound-dai-cells = <1>;
+	};
+
 	wm8524: audio-codec {
 		#sound-dai-cells = <0>;
 		compatible = "wlf,wm8524";
 		wlf,mute-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
 	};
 
+	sound-bt-sco {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "bt-sco-audio";
+		simple-audio-card,format = "dsp_a";
+		simple-audio-card,bitclock-inversion;
+		simple-audio-card,frame-master = <&btcpu>;
+		simple-audio-card,bitclock-master = <&btcpu>;
+
+		btcpu: simple-audio-card,cpu {
+			sound-dai = <&sai3>;
+			dai-tdm-slot-num = <2>;
+			dai-tdm-slot-width = <16>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&audio_codec_bt_sco 1>;
+		};
+	};
+
 	sound-wm8524 {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "wm8524-audio";
@@ -386,6 +410,16 @@
 	status = "okay";
 };
 
+&sai3 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX8MQ_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
@@ -548,6 +582,15 @@
 		>;
 	};
 
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC     0xd6
+			MX8MQ_IOMUXC_SAI3_TXC_SAI3_TX_BCLK      0xd6
+			MX8MQ_IOMUXC_SAI3_TXD_SAI3_TX_DATA0     0xd6
+			MX8MQ_IOMUXC_SAI3_RXD_SAI3_RX_DATA0     0xd6
+		>;
+	};
+
 	pinctrl_spdif1: spdif1grp {
 		fsl,pins = <
 			MX8MQ_IOMUXC_SPDIF_TX_SPDIF1_OUT	0xd6
arch/arm/dts/imx8mq-librem5-r3.dtsi new file +45 -0

45 lines not on this page · raw message

arch/arm/dts/imx8mq-librem5-r4.dts +6 -14
index cbfb49aa25..1056b7981b 100644
@@ -1,35 +1,27 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-// Copyright (C) 2020 Purism SPC <[email protected]>
+// Copyright (C) 2021 Purism SPC <[email protected]>
 
 /dts-v1/;
 
-#include "imx8mq-librem5.dtsi"
+#include "imx8mq-librem5-r3.dtsi"
 
 / {
 	model = "Purism Librem 5r4";
 	compatible = "purism,librem5r4", "purism,librem5", "fsl,imx8mq";
 };
 
-&accel_gyro {
-	mount-matrix =  "1",  "0",  "0",
-			"0",  "1",  "0",
-			"0",  "0", "-1";
-};
-
 &bat {
 	maxim,rsns-microohm = <1667>;
 };
 
-&bq25895 {
-	ti,battery-regulation-voltage = <4200000>; /* uV */
-	ti,charge-current = <1500000>; /* uA */
-	ti,termination-current = <144000>;  /* uA */
-};
-
 &led_backlight {
 	led-max-microamp = <25000>;
 };
 
+&lcd_panel {
+	compatible = "ys,ys57pss36bh5gq";
+};
+
 &proximity {
 	proximity-near-level = <10>;
 };
arch/arm/dts/imx8mq-librem5.dtsi +140 -13

261 lines not on this page · raw message

arch/arm/dts/imx8mq-u-boot.dtsi +5 -5
index c69c6cc58b..8d385e8da4 100644
@@ -10,23 +10,23 @@
 
 };
 
-&{/soc@0} {
+&soc {
 	u-boot,dm-spl;
 };
 
-&{/soc@0/bus@30000000} {
+&aips1 {
 	u-boot,dm-spl;
 };
 
-&{/soc@0/bus@30400000} {
+&aips2 {
 	u-boot,dm-spl;
 };
 
-&{/soc@0/bus@30800000} {
+&aips3 {
 	u-boot,dm-spl;
 };
 
-&{/soc@0/bus@32c00000} {
+&aips4 {
 	u-boot,dm-spl;
 };
 
arch/arm/dts/imx8mq.dtsi +10 -9
index 49eadb081b..19eaa52356 100644
@@ -94,7 +94,7 @@
 	clk_ext4: clock-ext4 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency= <133000000>;
+		clock-frequency = <133000000>;
 		clock-output-names = "clk_ext4";
 	};
 
@@ -320,7 +320,7 @@
 		arm,no-tick-in-suspend;
 	};
 
-	soc@0 {
+	soc: soc@0 {
 		compatible = "fsl,imx8mq-soc", "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -329,7 +329,7 @@
 		nvmem-cells = <&imx8mq_uid>;
 		nvmem-cell-names = "soc_unique_id";
 
-		bus@30000000 { /* AIPS1 */
+		aips1: bus@30000000 { /* AIPS1 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			reg = <0x30000000 0x400000>;
 			#address-cells = <1>;
@@ -507,7 +507,7 @@
 						      <0x00030005 0x00000053>,
 						      <0x00030006 0x0000005f>,
 						      <0x00030007 0x00000071>;
-				#thermal-sensor-cells =  <1>;
+				#thermal-sensor-cells = <1>;
 			};
 
 			wdog1: watchdog@30280000 {
@@ -534,7 +534,7 @@
 				status = "disabled";
 			};
 
-			sdma2: sdma@302c0000 {
+			sdma2: dma-controller@302c0000 {
 				compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma";
 				reg = <0x302c0000 0x10000>;
 				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
@@ -784,7 +784,7 @@
 			};
 		};
 
-		bus@30400000 { /* AIPS2 */
+		aips2: bus@30400000 { /* AIPS2 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			reg = <0x30400000 0x400000>;
 			#address-cells = <1>;
@@ -844,7 +844,7 @@
 			};
 		};
 
-		bus@30800000 { /* AIPS3 */
+		aips3: bus@30800000 { /* AIPS3 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			reg = <0x30800000 0x400000>;
 			#address-cells = <1>;
@@ -1018,6 +1018,7 @@
 					compatible = "fsl,sec-v4.0-job-ring";
 					reg = <0x1000 0x1000>;
 					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+					status = "disabled";
 				};
 
 				sec_jr1: jr@2000 {
@@ -1301,7 +1302,7 @@
 				status = "disabled";
 			};
 
-			sdma1: sdma@30bd0000 {
+			sdma1: dma-controller@30bd0000 {
 				compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma";
 				reg = <0x30bd0000 0x10000>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
@@ -1369,7 +1370,7 @@
 			};
 		};
 
-		bus@32c00000 { /* AIPS4 */
+		aips4: bus@32c00000 { /* AIPS4 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			reg = <0x32c00000 0x400000>;
 			#address-cells = <1>;
include/dt-bindings/reset/imx8mq-reset.h +32 -29

69 lines not on this page · raw message

Signature · 1 line
2.35.1
#11 lore raw

PATCH v5 5/8 imx8mq: synchronise device tree with linux

Quoted 3 lines

From: Marcel Ziswiler <[email protected]> Synchronise device tree with linux v6.1-rc3.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================
#12 lore raw

PATCH v5 6/8 imx8mp: synchronise device tree with linux

In reply to Marcel Ziswiler

From: Marcel Ziswiler <[email protected]>

Synchronise device tree with linux v6.1-rc3.

---

Changes in v5:
- Add Tim's tested-by. Thanks!

Changes in v4:
- Re-synched with v6.1-rc3.

 arch/arm/dts/imx8mp-dhcom-pdk2.dts            |  29 +-
 arch/arm/dts/imx8mp-dhcom-som.dtsi            |  20 +-
 arch/arm/dts/imx8mp-evk.dts                   | 179 +++++++----
 arch/arm/dts/imx8mp-icore-mx8mp-edimm2.2.dts  |   2 +-
 arch/arm/dts/imx8mp-icore-mx8mp.dtsi          |   2 +-
 arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts   |  48 +--
 arch/arm/dts/imx8mp-u-boot.dtsi               |   2 +-
 arch/arm/dts/imx8mp-venice-gw74xx.dts         | 284 +++++++++++++-----
 arch/arm/dts/imx8mp-verdin.dtsi               |  32 +-
 arch/arm/dts/imx8mp.dtsi                      | 147 ++++++++-
 include/dt-bindings/clock/imx8mp-clock.h      |  13 +-
 include/dt-bindings/interconnect/fsl,imx8mp.h |  59 ++++
 include/dt-bindings/power/imx8mp-power.h      |  21 +-
 include/dt-bindings/reset/imx8mp-reset.h      |  50 +++
 14 files changed, 683 insertions(+), 205 deletions(-)
 create mode 100644 include/dt-bindings/interconnect/fsl,imx8mp.h
 create mode 100644 include/dt-bindings/reset/imx8mp-reset.h
arch/arm/dts/imx8mp-dhcom-pdk2.dts +20 -9
index c9a481ac9a..382fbedaf6 100644
@@ -17,14 +17,13 @@
 / {
 	model = "DH electronics i.MX8M Plus DHCOM Premium Developer Kit (2)";
 	compatible = "dh,imx8mp-dhcom-pdk2", "dh,imx8mp-dhcom-som",
-	             "fsl,imx8mp";
+		     "fsl,imx8mp";
 
 	chosen {
 		stdout-path = &uart1;
 	};
 
 	gpio-keys {
-		#size-cells = <0>;
 		compatible = "gpio-keys";
 
 		button-0 {
@@ -67,7 +66,7 @@
 	led {
 		compatible = "gpio-leds";
 
-		led-5 {
+		led-0 {
 			color = <LED_COLOR_ID_GREEN>;
 			default-state = "off";
 			function = LED_FUNCTION_INDICATOR;
@@ -76,7 +75,7 @@
 			pinctrl-names = "default";
 		};
 
-		led-6 {
+		led-1 {
 			color = <LED_COLOR_ID_GREEN>;
 			default-state = "off";
 			function = LED_FUNCTION_INDICATOR;
@@ -85,7 +84,7 @@
 			pinctrl-names = "default";
 		};
 
-		led-7 {
+		led-2 {
 			color = <LED_COLOR_ID_GREEN>;
 			default-state = "off";
 			function = LED_FUNCTION_INDICATOR;
@@ -94,7 +93,7 @@
 			pinctrl-names = "default";
 		};
 
-		led-8 {
+		led-3 {
 			color = <LED_COLOR_ID_GREEN>;
 			default-state = "off";
 			function = LED_FUNCTION_INDICATOR;
@@ -123,10 +122,11 @@
 	mdio {
 		ethphypdk: ethernet-phy@7 { /* KSZ 9021 */
 			compatible = "ethernet-phy-ieee802.3-c22";
-			interrupt-parent = <&gpio4>;
-			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 			pinctrl-0 = <&pinctrl_ethphy1>;
 			pinctrl-names = "default";
+			interrupt-parent = <&gpio4>;
+			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+			max-speed = <100>;
 			reg = <7>;
 			reset-assert-us = <1000>;
 			reset-deassert-us = <1000>;
@@ -143,7 +143,6 @@
 			txd2-skew-ps = <0>;
 			txd3-skew-ps = <0>;
 			txen-skew-ps = <0>;
-			max-speed = <100>;
 		};
 	};
 };
@@ -155,3 +154,15 @@
 &usb3_1 {
 	fsl,over-current-active-low;
 };
+
+&iomuxc {
+	/*
+	 * GPIO_A,B,C,D are connected to buttons.
+	 * GPIO_E,F,H,I are connected to LEDs.
+	 * GPIO_M is connected to CLKOUT2.
+	 */
+	pinctrl-0 = <&pinctrl_hog_base
+		     &pinctrl_dhcom_g &pinctrl_dhcom_j
+		     &pinctrl_dhcom_k &pinctrl_dhcom_l
+		     &pinctrl_dhcom_int>;
+};
arch/arm/dts/imx8mp-dhcom-som.dtsi +4 -16
index 197840d1a6..0f13ee3627 100644
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) 2021-2022 Marek Vasut <[email protected]>
  */
@@ -224,10 +224,6 @@
 };
 
 &i2c3 {
-	/*
-	 * iMX8MP 1P33A Errata ERR007805
-	 * I2C is limited to 384 kHz due to SoC bug.
-	 */
 	clock-frequency = <100000>;
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c3>;
@@ -393,10 +389,6 @@
 };
 
 &i2c4 {
-	/*
-	 * iMX8MP 1P33A Errata ERR007805
-	 * I2C is limited to 384 kHz due to SoC bug.
-	 */
 	clock-frequency = <100000>;
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c4>;
@@ -407,10 +399,6 @@
 };
 
 &i2c5 {	/* HDMI EDID bus */
-	/*
-	 * iMX8MP 1P33A Errata ERR007805
-	 * I2C is limited to 384 kHz due to SoC bug.
-	 */
 	clock-frequency = <100000>;
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c5>;
@@ -802,8 +790,8 @@
 
 	pinctrl_i2c5: dhcom-i2c5-grp {
 		fsl,pins = <
-			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x40000084
-			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x40000084
+			MX8MP_IOMUXC_HDMI_DDC_SCL__I2C5_SCL		0x40000084
+			MX8MP_IOMUXC_HDMI_DDC_SDA__I2C5_SDA		0x40000084
 		>;
 	};
 
@@ -830,7 +818,7 @@
 	pinctrl_rtc: dhcom-rtc-grp {
 		fsl,pins = <
 			/* RTC_#INT Interrupt */
-			MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05		0x400001c6
+			MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05		0x40000080
 		>;
 	};
 
arch/arm/dts/imx8mp-evk.dts +124 -55

289 lines not on this page · raw message

arch/arm/dts/imx8mp-icore-mx8mp-edimm2.2.dts +1 -1
index dd703b6a5e..a02b31c42d 100644
@@ -2,7 +2,7 @@
 /*
  * Copyright (c) 2018 NXP
  * Copyright (c) 2019 Engicam srl
- * Copyright (c) 2020 Amarula Solutons(India)
+ * Copyright (c) 2020 Amarula Solutions(India)
  */
 
 /dts-v1/;
arch/arm/dts/imx8mp-icore-mx8mp.dtsi +1 -1
index 5116079cce..a6319824ea 100644
@@ -2,7 +2,7 @@
 /*
  * Copyright (c) 2018 NXP
  * Copyright (c) 2019 Engicam srl
- * Copyright (c) 2020 Amarula Solutons(India)
+ * Copyright (c) 2020 Amarula Solutions(India)
  */
 
 / {
arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts +24 -24

93 lines not on this page · raw message

arch/arm/dts/imx8mp-u-boot.dtsi +1 -1
index b5d640df7e..f9883aa133 100644
@@ -10,7 +10,7 @@
 	};
 };
 
-&{/soc@0} {
+&soc {
 	u-boot,dm-pre-reloc;
 	u-boot,dm-spl;
 };
arch/arm/dts/imx8mp-venice-gw74xx.dts +207 -77

493 lines not on this page · raw message

arch/arm/dts/imx8mp-verdin.dtsi +28 -4
index 68100a1726..7b712d1888 100644
@@ -49,7 +49,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 
-		wakeup {
+		button-wakeup {
 			debounce-interval = <10>;
 			/* Verdin CTRL_WAKE1_MICO# (SODIMM 252) */
 			gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
@@ -146,6 +146,30 @@
 	};
 };
 
+&A53_0 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&cpu_alert0 {
+	temperature = <95000>;
+};
+
+&cpu_crit0 {
+	temperature = <105000>;
+};
+
 /* Verdin SPI_1 */
 &ecspi1 {
 	#address-cells = <1>;
@@ -445,7 +469,7 @@
 				regulator-ramp-delay = <3125>;
 			};
 
-			BUCK2 {
+			reg_vdd_arm: BUCK2 {
 				nxp,dvs-run-voltage = <950000>;
 				nxp,dvs-standby-voltage = <850000>;
 				regulator-always-on;
@@ -619,7 +643,7 @@
 		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
 		reg = <0x4a>;
 		/* Verdin GPIO_2 (SODIMM 208) */
-		reset-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
 		status = "disabled";
 	};
 };
@@ -696,7 +720,7 @@
 		pinctrl-0 = <&pinctrl_gpio_9_dsi>, <&pinctrl_i2s_2_bclk_touch_reset>;
 		reg = <0x4a>;
 		/* Verdin I2S_2_BCLK (TOUCH_RESET#, SODIMM 42) */
-		reset-gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
 		status = "disabled";
 	};
 
arch/arm/dts/imx8mp.dtsi +139 -8

249 lines not on this page · raw message

include/dt-bindings/clock/imx8mp-clock.h +8 -5
index e8d68fbb6e..9d5cc2ddde 100644
@@ -117,7 +117,6 @@
 #define IMX8MP_CLK_AUDIO_AHB			108
 #define IMX8MP_CLK_MIPI_DSI_ESC_RX		109
 #define IMX8MP_CLK_IPG_ROOT			110
-#define IMX8MP_CLK_IPG_AUDIO_ROOT		111
 #define IMX8MP_CLK_DRAM_ALT			112
 #define IMX8MP_CLK_DRAM_APB			113
 #define IMX8MP_CLK_VPU_G1			114
@@ -125,7 +124,6 @@
 #define IMX8MP_CLK_CAN1				116
 #define IMX8MP_CLK_CAN2				117
 #define IMX8MP_CLK_MEMREPAIR			118
-#define IMX8MP_CLK_PCIE_PHY			119
 #define IMX8MP_CLK_PCIE_AUX			120
 #define IMX8MP_CLK_I2C5				121
 #define IMX8MP_CLK_I2C6				122
@@ -182,8 +180,6 @@
 #define IMX8MP_CLK_MEDIA_CAM2_PIX		173
 #define IMX8MP_CLK_MEDIA_LDB			174
 #define IMX8MP_CLK_MEDIA_MIPI_CSI2_ESC		175
-#define IMX8MP_CLK_PCIE2_CTRL			176
-#define IMX8MP_CLK_PCIE2_PHY			177
 #define IMX8MP_CLK_MEDIA_MIPI_TEST_BYTE		178
 #define IMX8MP_CLK_ECSPI3			179
 #define IMX8MP_CLK_PDM				180
@@ -321,8 +317,15 @@
 #define IMX8MP_CLK_AUDIO_AXI			310
 #define IMX8MP_CLK_HSIO_AXI			311
 #define IMX8MP_CLK_MEDIA_ISP			312
+#define IMX8MP_CLK_MEDIA_DISP2_PIX		313
+#define IMX8MP_CLK_CLKOUT1_SEL			314
+#define IMX8MP_CLK_CLKOUT1_DIV			315
+#define IMX8MP_CLK_CLKOUT1			316
+#define IMX8MP_CLK_CLKOUT2_SEL			317
+#define IMX8MP_CLK_CLKOUT2_DIV			318
+#define IMX8MP_CLK_CLKOUT2			319
 
-#define IMX8MP_CLK_END				313
+#define IMX8MP_CLK_END				320
 
 #define IMX8MP_CLK_AUDIOMIX_SAI1_IPG		0
 #define IMX8MP_CLK_AUDIOMIX_SAI1_MCLK1		1
include/dt-bindings/interconnect/fsl,imx8mp.h new file +59 -0

59 lines not on this page · raw message

include/dt-bindings/power/imx8mp-power.h +17 -4
index 3f72bf7818..2fe3c2abad 100644
@@ -38,9 +38,22 @@
 #define IMX8MP_MEDIABLK_PD_ISI				3
 #define IMX8MP_MEDIABLK_PD_MIPI_CSI2_2			4
 #define IMX8MP_MEDIABLK_PD_LCDIF_2			5
-#define IMX8MP_MEDIABLK_PD_ISP2				6
-#define IMX8MP_MEDIABLK_PD_ISP1				7
-#define IMX8MP_MEDIABLK_PD_DWE				8
-#define IMX8MP_MEDIABLK_PD_MIPI_DSI_2			9
+#define IMX8MP_MEDIABLK_PD_ISP				6
+#define IMX8MP_MEDIABLK_PD_DWE				7
+#define IMX8MP_MEDIABLK_PD_MIPI_DSI_2			8
+
+#define IMX8MP_HDMIBLK_PD_IRQSTEER			0
+#define IMX8MP_HDMIBLK_PD_LCDIF				1
+#define IMX8MP_HDMIBLK_PD_PAI				2
+#define IMX8MP_HDMIBLK_PD_PVI				3
+#define IMX8MP_HDMIBLK_PD_TRNG				4
+#define IMX8MP_HDMIBLK_PD_HDMI_TX			5
+#define IMX8MP_HDMIBLK_PD_HDMI_TX_PHY			6
+#define IMX8MP_HDMIBLK_PD_HDCP				7
+#define IMX8MP_HDMIBLK_PD_HRV				8
+
+#define IMX8MP_VPUBLK_PD_G1				0
+#define IMX8MP_VPUBLK_PD_G2				1
+#define IMX8MP_VPUBLK_PD_VC8000E			2
 
 #endif
include/dt-bindings/reset/imx8mp-reset.h new file +50 -0

50 lines not on this page · raw message

Signature · 1 line
2.35.1
#13 lore raw

PATCH v5 6/8 imx8mp: synchronise device tree with linux

Quoted 4 lines

From: Marcel Ziswiler <[email protected]> Synchronise device tree with linux v6.1-rc3.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================
#14 lore raw

PATCH v5 7/8 imx8mn: synchronise device tree with linux

In reply to Marcel Ziswiler

From: Marcel Ziswiler <[email protected]>

Synchronise device tree with linux v6.1-rc3.

---

Changes in v5:
- Add Tim's tested-by. Thanks!

Changes in v4:
- Re-based after Adam's common imx8mn-u-boot device tree creation.
- Re-synched with v6.1-rc3.

 arch/arm/dts/imx8mn-beacon-baseboard.dtsi |  4 +-
 arch/arm/dts/imx8mn-evk.dtsi              | 45 ++++++++++++++++++++++-
 arch/arm/dts/imx8mn-var-som-symphony.dts  |  6 +--
 arch/arm/dts/imx8mn-venice-gw7902.dts     |  9 ++---
 arch/arm/dts/imx8mn.dtsi                  | 14 +++----
 include/dt-bindings/interconnect/imx8mn.h | 41 +++++++++++++++++++++
 6 files changed, 101 insertions(+), 18 deletions(-)
 create mode 100644 include/dt-bindings/interconnect/imx8mn.h
arch/arm/dts/imx8mn-beacon-baseboard.dtsi +2 -2
index 02f37dcda7..9e82069c94 100644
@@ -146,7 +146,7 @@
 };
 
 &easrc {
-	fsl,asrc-rate  = <48000>;
+	fsl,asrc-rate = <48000>;
 	status = "okay";
 };
 
@@ -182,7 +182,7 @@
 &usbotg1 {
 	vbus-supply = <&reg_usb_otg_vbus>;
 	disable-over-current;
-	dr_mode="otg";
+	dr_mode = "otg";
 	status = "okay";
 };
 
arch/arm/dts/imx8mn-evk.dtsi +44 -1

75 lines not on this page · raw message

arch/arm/dts/imx8mn-var-som-symphony.dts +3 -3
index f61c48776c..3ed7021a48 100644
@@ -26,19 +26,19 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		back {
+		key-back {
 			label = "Back";
 			gpios = <&pca9534 1 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_BACK>;
 		};
 
-		home {
+		key-home {
 			label = "Home";
 			gpios = <&pca9534 2 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_HOME>;
 		};
 
-		menu {
+		key-menu {
 			label = "Menu";
 			gpios = <&pca9534 3 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_MENU>;
arch/arm/dts/imx8mn-venice-gw7902.dts +4 -5
index 367a232675..dd4302ac1d 100644
@@ -39,13 +39,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -59,14 +59,14 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
@@ -213,7 +213,6 @@
 		compatible = "microchip,mcp2515";
 		reg = <0>;
 		clocks = <&can20m>;
-		oscillator-frequency = <20000000>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 		spi-max-frequency = <10000000>;
arch/arm/dts/imx8mn.dtsi +7 -7
index e41e1d56f9..cb2836bfbd 100644
@@ -212,7 +212,7 @@
 	clk_ext4: clock-ext4 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency= <133000000>;
+		clock-frequency = <133000000>;
 		clock-output-names = "clk_ext4";
 	};
 
@@ -269,7 +269,7 @@
 		arm,no-tick-in-suspend;
 	};
 
-	soc@0 {
+	soc: soc@0 {
 		compatible = "fsl,imx8mn-soc", "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -422,7 +422,7 @@
 						    "ctx2_rx", "ctx2_tx",
 						    "ctx3_rx", "ctx3_tx";
 					firmware-name = "imx/easrc/easrc-imx8mn.bin";
-					fsl,asrc-rate  = <8000>;
+					fsl,asrc-rate = <8000>;
 					fsl,asrc-format = <2>;
 					status = "disabled";
 				};
@@ -672,7 +672,6 @@
 							 <&clk IMX8MN_CLK_GPU_SHADER>,
 							 <&clk IMX8MN_CLK_GPU_BUS_ROOT>,
 							 <&clk IMX8MN_CLK_GPU_AHB>;
-						resets = <&src IMX8MQ_RESET_GPU_RESET>;
 					};
 
 					pgc_dispmix: power-domain@3 {
@@ -857,6 +856,7 @@
 					 compatible = "fsl,sec-v4.0-job-ring";
 					 reg = <0x1000 0x1000>;
 					 interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+					 status = "disabled";
 				};
 
 				sec_jr1: jr@2000 {
@@ -941,7 +941,7 @@
 					 <&clk IMX8MN_CLK_USDHC1_ROOT>;
 				clock-names = "ipg", "ahb", "per";
 				fsl,tuning-start-tap = <20>;
-				fsl,tuning-step= <2>;
+				fsl,tuning-step = <2>;
 				bus-width = <4>;
 				status = "disabled";
 			};
@@ -955,7 +955,7 @@
 					 <&clk IMX8MN_CLK_USDHC2_ROOT>;
 				clock-names = "ipg", "ahb", "per";
 				fsl,tuning-start-tap = <20>;
-				fsl,tuning-step= <2>;
+				fsl,tuning-step = <2>;
 				bus-width = <4>;
 				status = "disabled";
 			};
@@ -969,7 +969,7 @@
 					 <&clk IMX8MN_CLK_USDHC3_ROOT>;
 				clock-names = "ipg", "ahb", "per";
 				fsl,tuning-start-tap = <20>;
-				fsl,tuning-step= <2>;
+				fsl,tuning-step = <2>;
 				bus-width = <4>;
 				status = "disabled";
 			};
include/dt-bindings/interconnect/imx8mn.h new file +41 -0

41 lines not on this page · raw message

Signature · 1 line
2.35.1
#15 lore raw

PATCH v5 7/8 imx8mn: synchronise device tree with linux

Quoted 4 lines

From: Marcel Ziswiler <[email protected]> Synchronise device tree with linux v6.1-rc3.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================
#16 lore raw

PATCH v5 8/8 imx8mm: synchronise device tree with linux

In reply to Marcel Ziswiler

From: Marcel Ziswiler <[email protected]>

Synchronise device tree with linux v6.1-rc3.

---

Changes in v5:
- Add Tim's tested-by. Thanks!

Changes in v4:
- Re-synched with v6.1-rc3.

 arch/arm/dts/imx8mm-beacon-baseboard.dtsi |  4 +-
 arch/arm/dts/imx8mm-evk.dtsi              | 43 +++++++++++++++++++
 arch/arm/dts/imx8mm-icore-mx8mm.dtsi      | 14 +++----
 arch/arm/dts/imx8mm-mx8menlo.dts          | 14 +++----
 arch/arm/dts/imx8mm-u-boot.dtsi           |  2 +-
 arch/arm/dts/imx8mm-venice-gw700x.dtsi    | 24 +++++------
 arch/arm/dts/imx8mm-venice-gw7901.dts     | 12 ++++--
 arch/arm/dts/imx8mm-venice-gw7902.dts     | 14 +++----
 arch/arm/dts/imx8mm-venice-gw7903.dts     |  6 +--
 arch/arm/dts/imx8mm-venice-gw7904.dts     |  4 ++
 arch/arm/dts/imx8mm-verdin.dtsi           | 50 +++++++++++++++++------
 include/dt-bindings/interconnect/imx8mm.h | 50 +++++++++++++++++++++++
 12 files changed, 179 insertions(+), 58 deletions(-)
 create mode 100644 include/dt-bindings/interconnect/imx8mm.h
arch/arm/dts/imx8mm-beacon-baseboard.dtsi +2 -2
index f338a886d8..03266bd90a 100644
@@ -285,14 +285,14 @@
 &usbotg1 {
 	vbus-supply = <&reg_usbotg1>;
 	disable-over-current;
-	dr_mode="otg";
+	dr_mode = "otg";
 	status = "okay";
 };
 
 &usbotg2 {
 	pinctrl-names = "default";
 	disable-over-current;
-	dr_mode="host";
+	dr_mode = "host";
 	status = "okay";
 };
 
arch/arm/dts/imx8mm-evk.dtsi +43 -0

67 lines not on this page · raw message

arch/arm/dts/imx8mm-icore-mx8mm.dtsi +7 -7
index b40148d728..def7bb5d37 100644
@@ -2,7 +2,7 @@
 /*
  * Copyright (c) 2018 NXP
  * Copyright (c) 2019 Engicam srl
- * Copyright (c) 2020 Amarula Solutons(India)
+ * Copyright (c) 2020 Amarula Solutions(India)
  */
 
 / {
@@ -84,42 +84,42 @@
 			};
 
 			reg_buck1: buck1 {
-				regulator-min-microvolt =  <400000>;
+				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
 				regulator-boot-on;
 			};
 
 			reg_buck2: buck2 {
-				regulator-min-microvolt =  <400000>;
+				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
 				regulator-boot-on;
 			};
 
 			reg_buck3: buck3 {
-				regulator-min-microvolt =  <400000>;
+				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
 				regulator-boot-on;
 			};
 
 			reg_buck4: buck4 {
-				regulator-min-microvolt =  <400000>;
+				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
 				regulator-boot-on;
 			};
 
 			reg_buck5: buck5 {
-				regulator-min-microvolt =  <400000>;
+				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
 				regulator-boot-on;
 			};
 
 			reg_buck6: buck6 {
-				regulator-min-microvolt =  <400000>;
+				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
 				regulator-boot-on;
arch/arm/dts/imx8mm-mx8menlo.dts +7 -7
index 92eaf4ef45..32f6f2f50c 100644
@@ -20,13 +20,13 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_led>;
 
-		user1 {
+		led-1 {
 			label = "TestLed601";
 			gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc0";
 		};
 
-		user2 {
+		led-2 {
 			label = "TestLed602";
 			gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
@@ -152,11 +152,11 @@
 	 * CPLD_reset is RESET_SOFT in schematic
 	 */
 	gpio-line-names =
-		"CPLD_D[1]", "CPLD_int", "CPLD_reset", "",
-		"", "CPLD_D[0]", "", "",
-		"", "", "", "CPLD_D[2]",
-		"CPLD_D[3]", "CPLD_D[4]", "CPLD_D[5]", "CPLD_D[6]",
-		"CPLD_D[7]", "", "", "",
+		"CPLD_D[6]", "CPLD_int", "CPLD_reset", "",
+		"", "CPLD_D[7]", "", "",
+		"", "", "", "CPLD_D[5]",
+		"CPLD_D[4]", "CPLD_D[3]", "CPLD_D[2]", "CPLD_D[1]",
+		"CPLD_D[0]", "", "", "",
 		"", "", "", "",
 		"", "", "", "KBD_intK",
 		"", "", "", "";
arch/arm/dts/imx8mm-u-boot.dtsi +1 -1
index a5e30f7994..60d49bc3d7 100644
@@ -9,7 +9,7 @@
 	};
 };
 
-&{/soc@0} {
+&soc {
 	u-boot,dm-pre-reloc;
 	u-boot,dm-spl;
 };
arch/arm/dts/imx8mm-venice-gw700x.dtsi +12 -12
index 00f86cada3..66a0d103c9 100644
@@ -16,13 +16,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -36,14 +36,14 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
@@ -286,8 +286,8 @@
 				regulator-name = "buck1";
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <1000000>;
-				regulator-min-microamp  = <3800000>;
-				regulator-max-microamp  = <6800000>;
+				regulator-min-microamp = <3800000>;
+				regulator-max-microamp = <6800000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
@@ -297,8 +297,8 @@
 				regulator-name = "buck2";
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <900000>;
-				regulator-min-microamp  = <2200000>;
-				regulator-max-microamp  = <5200000>;
+				regulator-min-microamp = <2200000>;
+				regulator-max-microamp = <5200000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
@@ -308,8 +308,8 @@
 				regulator-name = "buck3";
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <1000000>;
-				regulator-min-microamp  = <3800000>;
-				regulator-max-microamp  = <6800000>;
+				regulator-min-microamp = <3800000>;
+				regulator-max-microamp = <6800000>;
 				regulator-always-on;
 			};
 
@@ -318,8 +318,8 @@
 				regulator-name = "buck4";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
-				regulator-min-microamp  = <2200000>;
-				regulator-max-microamp  = <5200000>;
+				regulator-min-microamp = <2200000>;
+				regulator-max-microamp = <5200000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
arch/arm/dts/imx8mm-venice-gw7901.dts +8 -4
index 24737e8903..d3ee6fc4ba 100644
@@ -38,13 +38,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -58,14 +58,14 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
@@ -626,24 +626,28 @@
 			lan1: port@0 {
 				reg = <0>;
 				label = "lan1";
+				phy-mode = "internal";
 				local-mac-address = [00 00 00 00 00 00];
 			};
 
 			lan2: port@1 {
 				reg = <1>;
 				label = "lan2";
+				phy-mode = "internal";
 				local-mac-address = [00 00 00 00 00 00];
 			};
 
 			lan3: port@2 {
 				reg = <2>;
 				label = "lan3";
+				phy-mode = "internal";
 				local-mac-address = [00 00 00 00 00 00];
 			};
 
 			lan4: port@3 {
 				reg = <3>;
 				label = "lan4";
+				phy-mode = "internal";
 				local-mac-address = [00 00 00 00 00 00];
 			};
 
arch/arm/dts/imx8mm-venice-gw7902.dts +5 -9
index 8e8d0d34c2..31f4c735fe 100644
@@ -42,13 +42,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -62,14 +62,14 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
@@ -222,7 +222,6 @@
 		compatible = "microchip,mcp2515";
 		reg = <0>;
 		clocks = <&can20m>;
-		oscillator-frequency = <20000000>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 		spi-max-frequency = <10000000>;
@@ -651,7 +650,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>;
 	rts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
-	cts-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+	cts-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
 	uart-has-rtscts;
 	status = "okay";
 };
@@ -742,9 +741,6 @@
 			MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x40000041 /* M2_RESET */
 			MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7	0x40000119 /* M2_OFF# */
 			MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x40000159 /* M2_WDIS# */
-			MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18       0x40000041 /* LTE_INT */
-			MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17       0x40000041 /* LTE_RST# */
-			MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16       0x40000041 /* LTE_PWR */
 			MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14	0x40000041 /* AMP GPIO1 */
 			MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12	0x40000041 /* AMP GPIO2 */
 			MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11	0x40000041 /* AMP GPIO3 */
arch/arm/dts/imx8mm-venice-gw7903.dts +3 -3
index 1b69ac0e12..19f6d2943d 100644
@@ -33,13 +33,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -53,7 +53,7 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
arch/arm/dts/imx8mm-venice-gw7904.dts +4 -0
index 2b68fb3e43..a67771d021 100644
@@ -617,6 +617,10 @@
 	status = "okay";
 };
 
+&pgc_mipi {
+	status = "disabled";
+};
+
 /* off-board RS232 */
 &uart1 {
 	pinctrl-names = "default";
arch/arm/dts/imx8mm-verdin.dtsi +37 -13

118 lines not on this page · raw message

include/dt-bindings/interconnect/imx8mm.h new file +50 -0

50 lines not on this page · raw message

Signature · 1 line
2.35.1
#17 lore raw

PATCH v5 8/8 imx8mm: synchronise device tree with linux

Quoted 4 lines

From: Marcel Ziswiler <[email protected]> Synchronise device tree with linux v6.1-rc3.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================
reviewer Reviewed-by on the v5 series
#18 lore raw
In reply to Marcel Ziswiler

Hi Marcel,

Quoted 15 lines · Marcel Ziswiler

From: Marcel Ziswiler <[email protected]>

This series synchronises them imx device trees with the upstream Linux kernel (v6.1-rc3). I split it into two parts. This is part 1.

It also fixes a few issues as discussed during/after the pre-mature application of my first series [1].

I am not touching kontron-sl-mx6ul as Frieder already took care of those [2].

Feedback welcome. Thanks!

Quoted 8 lines

[1] https://patchwork.ozlabs.org/project/uboot/cover/[email protected]/
[2] https://patchwork.ozlabs.org/project/uboot/cover/[email protected]/

Changes in v5:
- Add Giulio's reviewed-by and tested-by. Thanks!
- Add clock-names "per" to lpuart and re-add lcdif and usb* nodes as pointed out by Giulio.
- Add Tim's tested-by. Thanks!

For the series:

Thanks