Initial SDM670 and Pixel 3a support
v4 cover Initial SDM670 and Pixel 3a support
Changes since v3:
- remove qcom,msm-id and qcom,board-id (4/4)
Changes since v2:
- remove intc address and size cells (4/4)
- move apps_rsc label property down (4/4)
- move properties in intc (4/4)
- remove leading zeroes in iommus (4/4)
- change 0x0 to 0 in regs except cpu (4/4)
- change 0 to 0x0 in memory regs (4/4)
- convert hex to decimal in rmi4 #cells properties (4/4)
Changes since v1:
- remove i2c interconnects (4/4)
- change regulator phandle names (4/4)
- change regulators node names (4/4)
- remove clock-output-names from xo-board (4/4)
- remove vdd-supply from touchscreen (4/4)
- move clocks to device dts (4/4)
- reorder pmic nodes, root nodes, and phandle references in dts (4/4)
- move status properties to bottom of nodes (4/4)
- accumulate commit message tags (1-3/4)
Do not apply this series yet. It is only for review comments. It can be applied once the "qcom,sdm670-smmu-500" compatible string gets added (or now if you don't care about handling an unnecessary quirk).
This adds the device trees and bindings to support the Qualcomm Snapdragon 670 and Google Pixel 3a. This patch series, specifically the last patch, depends on:
[PATCH v4 0/3] SDM670 Global Clocks
https://lore.kernel.org/all/[email protected]/T/
[PATCH v2 0/2] RPMh Support for PM660 and PM660L
https://lore.kernel.org/all/[email protected]/T/
[PATCH v2 0/2] SDM670 RPMh Clocks
https://lore.kernel.org/all/[email protected]/T/
[PATCH v2 0/2] SDM670 USB 2.0 support
https://lore.kernel.org/all/[email protected]/T/
[PATCH 0/2] SDM670 SDHCI support
https://lore.kernel.org/all/[email protected]/T/
[PATCH v2 0/2] SDM670 Power Domains
https://lore.kernel.org/all/[email protected]/T/
[PATCH v10 0/3] SDM670 Pin Control Driver
https://lore.kernel.org/all/[email protected]/T/
[PATCH v6 0/4] SDM670 GPI DMA support
https://lore.kernel.org/all/[email protected]/T/
[RFC PATCH v2 0/11] iommu/arm-smmu-qcom: Rework Qualcomm SMMU bindings and implementation
https://lore.kernel.org/linux-arm-msm/[email protected]/T/
[PATCH v4 0/1] iommu: SMMU for SDM670
https://lore.kernel.org/linux-arm-msm/[email protected]/T/
Richard Acayan (4):
dt-bindings: arm: cpus: add qcom kryo 360 compatible
dt-bindings: arm: qcom: add sdm670 and pixel 3a compatible
dt-bindings: firmware: scm: add sdm670 compatible
arm64: dts: qcom: add sdm670 and pixel 3a device trees
.../devicetree/bindings/arm/cpus.yaml | 1 + .../devicetree/bindings/arm/qcom.yaml | 6 + .../bindings/firmware/qcom,scm.yaml | 1 + arch/arm64/boot/dts/qcom/Makefile | 1 + .../boot/dts/qcom/sdm670-google-sargo.dts | 531 ++++++++ arch/arm64/boot/dts/qcom/sdm670.dtsi | 1160 +++++++++++++++++ 6 files changed, 1700 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts create mode 100644 arch/arm64/boot/dts/qcom/sdm670.dtsi
P.S.: Thank you to all the maintainers and reviewers who went through everything and made helpful comments!
Signature · 1 line
2.38.1
PATCH v4 1/4 dt-bindings: arm: cpus: add qcom kryo 360 compatible
The Snapdragon 670 uses CPUs named Kryo 360 silver and Kryo 360 gold. Add the compatible string in the documentation.
--- Documentation/devicetree/bindings/arm/cpus.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/arm/cpus.yaml +1 -0
@@ -178,6 +178,7 @@ properties: - qcom,kryo250 - qcom,kryo260 - qcom,kryo280 + - qcom,kryo360 - qcom,kryo385 - qcom,kryo468 - qcom,kryo485
Signature · 1 line
2.38.1
PATCH v4 2/4 dt-bindings: arm: qcom: add sdm670 and pixel 3a compatible
In reply to Richard AcayanThe Snapdragon 670 and Pixel 3a initial device trees are about to be added. Add the compatible strings for the board.
--- Documentation/devicetree/bindings/arm/qcom.yaml | 6 ++++++ 1 file changed, 6 insertions(+)
Documentation/devicetree/bindings/arm/qcom.yaml +6 -0
@@ -51,6 +51,7 @@ description: | sdm632 sdm636 sdm660 + sdm670 sdm845 sdx55 sdx65
@@ -654,6 +655,11 @@ properties: - xiaomi,lavender - const: qcom,sdm660 + - items: + - enum: + - google,sargo + - const: qcom,sdm670 + - items: - enum: - qcom,sdx55-mtp
Signature · 1 line
2.38.1
PATCH v4 3/4 dt-bindings: firmware: scm: add sdm670 compatible
In reply to Richard AcayanThe Snapdragon 670 uses SCM as for PSCI power management. Document the appropriate compatible string for it.
--- Documentation/devicetree/bindings/firmware/qcom,scm.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/firmware/qcom,scm.yaml +1 -0
@@ -41,6 +41,7 @@ properties: - qcom,scm-sc7180 - qcom,scm-sc7280 - qcom,scm-sc8280xp + - qcom,scm-sdm670 - qcom,scm-sdm845 - qcom,scm-sdx55 - qcom,scm-sdx65
Signature · 1 line
2.38.1
PATCH v4 4/4 arm64: dts: qcom: add sdm670 and pixel 3a device trees
In reply to Richard AcayanThe Qualcomm Snapdragon 670 has been out for a while. Add a device tree for it and the Google Pixel 3a as the first device.
The Pixel 3a has the same bootloader issue as the Pixel 3 and will not work on Android 10 bootloaders or later until it gets fixed for the Pixel 3.
SoC Initial Features:
- power management
- clocks
- pinctrl
- eMMC
- USB 2.0
- GENI I2C
- IOMMU
- RPMh
- interrupts
Device-Specific Initial Features:
- side buttons (keys)
- regulators
- touchscreen
--- arch/arm64/boot/dts/qcom/Makefile | 1 + .../boot/dts/qcom/sdm670-google-sargo.dts | 531 ++++++++ arch/arm64/boot/dts/qcom/sdm670.dtsi | 1160 +++++++++++++++++ 3 files changed, 1692 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts create mode 100644 arch/arm64/boot/dts/qcom/sdm670.dtsi
arch/arm64/boot/dts/qcom/Makefile +1 -0
@@ -124,6 +124,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-voyager.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm632-fairphone-fp3.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm636-sony-xperia-ganges-mermaid.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm660-xiaomi-lavender.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm670-google-sargo.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r2.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r3.dtb
arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts new file +531 -0
531 lines not on this page · raw message
arch/arm64/boot/dts/qcom/sdm670.dtsi new file +1160 -0
1,160 lines not on this page · raw message
Signature · 1 line
2.38.1
Re: (subset) [PATCH v4 0/4] Initial SDM670 and Pixel 3a support
In reply to Richard AcayanQuoted 12 lines · Richard Acayan
Changes since v3:
- remove qcom,msm-id and qcom,board-id (4/4)Changes since v2:
- remove intc address and size cells (4/4)
- moveapps_rsclabel property down (4/4)
- move properties in intc (4/4)
- remove leading zeroes in iommus (4/4)
- change0x0to 0 in regs except cpu (4/4)
- change 0 to0x0in memory regs (4/4)
- convert hex to decimal in rmi4 #cells properties (4/4)
Quoted 1 line
[...]
Applied, thanks!
[4/4] arm64: dts: qcom: add sdm670 and pixel 3a device trees
commit: 07c8ded6e373830aed55139b2030e755177e1611
Best regards,
Signature · 1 line
Bjorn Andersson <[email protected]>