Linux RISC-V AIA Support
Subsystems (4)
cover Linux RISC-V AIA Support
The RISC-V AIA specification is now frozen as-per the RISC-V international process. The latest frozen specifcation can be found at:
https://github.com/riscv/riscv-aia/releases/download/1.0-RC1/riscv-interrupts-1.0-RC1.pdf
At a high-level, the AIA specification adds three things:
1) AIA CSRs
- Improved local interrupt support
2) Incoming Message Signaled Interrupt Controller (IMSIC)
- Per-HART MSI controller
- Support MSI virtualization
- Support IPI along with virtualization
3) Advanced Platform-Level Interrupt Controller (APLIC)
- Wired interrupt controller
- In MSI-mode, converts wired interrupt into MSIs (i.e. MSI generator)
- In Direct-mode, injects external interrupts directly into HARTs
For an overview of the AIA specification, refer the recent AIA virtualization talk at KVM Forum 2022:
https://static.sched.com/hosted_files/kvmforum2022/a1/AIA_Virtualization_in_KVM_RISCV_final.pdf
https://www.youtube.com/watch?v=r071dL8Z0yo
This series adds required Linux irqchip drivers for AIA and it depends on the recent "RISC-V IPI Improvements".
(Refer, https://lore.kernel.org/lkml/[email protected]/t/)
To test this series, use QEMU v7.1 (or higher) and OpenSBI v1.1 (or higher).
These patches can also be found in the riscv_aia_v1 branch at:
https://github.com/avpatel/linux.git
Anup Patel (9):
RISC-V: Add AIA related CSR defines
RISC-V: Detect AIA CSRs from ISA string irqchip/riscv-intc: Add support for RISC-V AIA
dt-bindings: Add RISC-V incoming MSI controller bindings
irqchip: Add RISC-V incoming MSI controller driver
dt-bindings: Add RISC-V advanced PLIC bindings
irqchip: Add RISC-V advanced PLIC driver
RISC-V: Select APLIC and IMSIC drivers for QEMU virt machine
MAINTAINERS: Add entry for RISC-V AIA drivers
.../interrupt-controller/riscv,aplic.yaml | 136 ++ .../interrupt-controller/riscv,imsic.yaml | 174 +++ MAINTAINERS | 12 + arch/riscv/Kconfig.socs | 2 + arch/riscv/include/asm/csr.h | 92 ++ arch/riscv/include/asm/hwcap.h | 8 + arch/riscv/kernel/cpu.c | 2 + arch/riscv/kernel/cpufeature.c | 2 + drivers/irqchip/Kconfig | 32 +- drivers/irqchip/Makefile | 2 + drivers/irqchip/irq-riscv-aplic.c | 656 +++++++++ drivers/irqchip/irq-riscv-imsic.c | 1207 +++++++++++++++++ drivers/irqchip/irq-riscv-intc.c | 37 +- include/linux/irqchip/riscv-aplic.h | 117 ++ include/linux/irqchip/riscv-imsic.h | 92 ++ 15 files changed, 2564 insertions(+), 7 deletions(-) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml create mode 100644 drivers/irqchip/irq-riscv-aplic.c create mode 100644 drivers/irqchip/irq-riscv-imsic.c create mode 100644 include/linux/irqchip/riscv-aplic.h create mode 100644 include/linux/irqchip/riscv-imsic.h
Signature · 1 line
2.34.1
PATCH 1/9 RISC-V: Add AIA related CSR defines
The RISC-V AIA specification improves handling per-HART local interrupts in a backward compatible manner. This patch adds defines for new RISC-V AIA CSRs.
--- arch/riscv/include/asm/csr.h | 92 ++++++++++++++++++++++++++++++++++++ 1 file changed, 92 insertions(+)
arch/riscv/include/asm/csr.h +92 -0
@@ -73,7 +73,10 @@#define IRQ_S_EXT 9#define IRQ_VS_EXT 10#define IRQ_M_EXT 11 +#define IRQ_S_GEXT 12#define IRQ_PMU_OVF 13 +#define IRQ_LOCAL_MAX (IRQ_PMU_OVF + 1) +#define IRQ_LOCAL_MASK ((_AC(1, UL) << IRQ_LOCAL_MAX) - 1)/* Exception causes */ #define EXC_INST_MISALIGNED 0
@@ -156,6 +159,26 @@ (_AC(1, UL) << IRQ_S_TIMER) | \ (_AC(1, UL) << IRQ_S_EXT)) +/* AIA CSR bits */ +#define TOPI_IID_SHIFT 16 +#define TOPI_IID_MASK 0xfff +#define TOPI_IPRIO_MASK 0xff +#define TOPI_IPRIO_BITS 8 + +#define TOPEI_ID_SHIFT 16 +#define TOPEI_ID_MASK 0x7ff +#define TOPEI_PRIO_MASK 0x7ff + +#define ISELECT_IPRIO0 0x30 +#define ISELECT_IPRIO15 0x3f +#define ISELECT_MASK 0x1ff + +#define HVICTL_VTI 0x40000000 +#define HVICTL_IID 0x0fff0000 +#define HVICTL_IID_SHIFT 16 +#define HVICTL_IPRIOM 0x00000100 +#define HVICTL_IPRIO 0x000000ff +/* xENVCFG flags */ #define ENVCFG_STCE (_AC(1, ULL) << 63)#define ENVCFG_PBMTE (_AC(1, ULL) << 62)
@@ -250,6 +273,18 @@#define CSR_STIMECMP 0x14D#define CSR_STIMECMPH 0x15D +/* Supervisor-Level Window to Indirectly Accessed Registers (AIA) */ +#define CSR_SISELECT 0x150 +#define CSR_SIREG 0x151 + +/* Supervisor-Level Interrupts (AIA) */ +#define CSR_STOPEI 0x15c +#define CSR_STOPI 0xdb0 + +/* Supervisor-Level High-Half CSRs (AIA) */ +#define CSR_SIEH 0x114 +#define CSR_SIPH 0x154 +#define CSR_VSSTATUS 0x200#define CSR_VSIE 0x204#define CSR_VSTVEC 0x205
@@ -279,8 +314,32 @@#define CSR_HGATP 0x680#define CSR_HGEIP 0xe12 +/* Virtual Interrupts and Interrupt Priorities (H-extension with AIA) */ +#define CSR_HVIEN 0x608 +#define CSR_HVICTL 0x609 +#define CSR_HVIPRIO1 0x646 +#define CSR_HVIPRIO2 0x647 + +/* VS-Level Window to Indirectly Accessed Registers (H-extension with AIA) */ +#define CSR_VSISELECT 0x250 +#define CSR_VSIREG 0x251 + +/* VS-Level Interrupts (H-extension with AIA) */ +#define CSR_VSTOPEI 0x25c +#define CSR_VSTOPI 0xeb0 + +/* Hypervisor and VS-Level High-Half CSRs (H-extension with AIA) */ +#define CSR_HIDELEGH 0x613 +#define CSR_HVIENH 0x618 +#define CSR_HVIPH 0x655 +#define CSR_HVIPRIO1H 0x656 +#define CSR_HVIPRIO2H 0x657 +#define CSR_VSIEH 0x214 +#define CSR_VSIPH 0x254 +#define CSR_MSTATUS 0x300#define CSR_MISA 0x301 +#define CSR_MIDELEG 0x303#define CSR_MIE 0x304#define CSR_MTVEC 0x305#define CSR_MENVCFG 0x30a
@@ -297,6 +356,25 @@#define CSR_MIMPID 0xf13#define CSR_MHARTID 0xf14 +/* Machine-Level Window to Indirectly Accessed Registers (AIA) */ +#define CSR_MISELECT 0x350 +#define CSR_MIREG 0x351 + +/* Machine-Level Interrupts (AIA) */ +#define CSR_MTOPEI 0x35c +#define CSR_MTOPI 0xfb0 + +/* Virtual Interrupts for Supervisor Level (AIA) */ +#define CSR_MVIEN 0x308 +#define CSR_MVIP 0x309 + +/* Machine-Level High-Half CSRs (AIA) */ +#define CSR_MIDELEGH 0x313 +#define CSR_MIEH 0x314 +#define CSR_MVIENH 0x318 +#define CSR_MVIPH 0x319 +#define CSR_MIPH 0x354 +#ifdef CONFIG_RISCV_M_MODE # define CSR_STATUS CSR_MSTATUS# define CSR_IE CSR_MIE
@@ -307,6 +385,13 @@# define CSR_TVAL CSR_MTVAL# define CSR_IP CSR_MIP +# define CSR_IEH CSR_MIEH +# define CSR_ISELECT CSR_MISELECT +# define CSR_IREG CSR_MIREG +# define CSR_IPH CSR_MIPH +# define CSR_TOPEI CSR_MTOPEI +# define CSR_TOPI CSR_MTOPI +# define SR_IE SR_MIE# define SR_PIE SR_MPIE# define SR_PP SR_MPP
@@ -324,6 +409,13 @@# define CSR_TVAL CSR_STVAL# define CSR_IP CSR_SIP +# define CSR_IEH CSR_SIEH +# define CSR_ISELECT CSR_SISELECT +# define CSR_IREG CSR_SIREG +# define CSR_IPH CSR_SIPH +# define CSR_TOPEI CSR_STOPEI +# define CSR_TOPI CSR_STOPI +# define SR_IE SR_SIE# define SR_PIE SR_SPIE# define SR_PP SR_SPP
Signature · 7 lines
2.34.1 _______________________________________________ linux-riscv mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-riscv
PATCH 2/9 RISC-V: Detect AIA CSRs from ISA string
In reply to Anup PatelWe have two extension names for AIA ISA support: Smaia (M-mode AIA CSRs) and Ssaia (S-mode AIA CSRs).
We extend the ISA string parsing to detect Smaia and Ssaia extensions.
--- arch/riscv/include/asm/hwcap.h | 8 ++++++++ arch/riscv/kernel/cpu.c | 2 ++ arch/riscv/kernel/cpufeature.c | 2 ++ 3 files changed, 12 insertions(+)
arch/riscv/include/asm/hwcap.h +8 -0
@@ -59,9 +59,17 @@ enum riscv_isa_ext_id {RISCV_ISA_EXT_ZIHINTPAUSE ,RISCV_ISA_EXT_SSTC ,RISCV_ISA_EXT_SVINVAL , +RISCV_ISA_EXT_SSAIA , +RISCV_ISA_EXT_SMAIA , RISCV_ISA_EXT_ID_MAX = RISCV_ISA_EXT_MAX, }; +#ifdef CONFIG_RISCV_M_MODE +#define RISCV_ISA_EXT_SxAIA RISCV_ISA_EXT_SMAIA +#else +#define RISCV_ISA_EXT_SxAIA RISCV_ISA_EXT_SSAIA +#endif +/* * This enum represents the logical ID for each RISC-V ISA extension static * keys. We can use static key to optimize code path if some ISA extensions
arch/riscv/kernel/cpu.c +2 -0
@@ -138,6 +138,8 @@ device_initcall(riscv_cpuinfo_init);* extensions by an underscore. */ static struct riscv_isa_ext_data isa_ext_arr[] = { +__RISCV_ISA_EXT_DATA (smaia,RISCV_ISA_EXT_SMAIA ), +__RISCV_ISA_EXT_DATA (ssaia,RISCV_ISA_EXT_SSAIA ),__RISCV_ISA_EXT_DATA (sscofpmf,RISCV_ISA_EXT_SSCOFPMF ),__RISCV_ISA_EXT_DATA (sstc,RISCV_ISA_EXT_SSTC ),__RISCV_ISA_EXT_DATA (svinval,RISCV_ISA_EXT_SVINVAL ),
arch/riscv/kernel/cpufeature.c +2 -0
@@ -205,6 +205,8 @@ void __init riscv_fill_hwcap(void)SET_ISA_EXT_MAP ("zihintpause" ,RISCV_ISA_EXT_ZIHINTPAUSE );SET_ISA_EXT_MAP ("sstc" ,RISCV_ISA_EXT_SSTC );SET_ISA_EXT_MAP ("svinval" ,RISCV_ISA_EXT_SVINVAL ); +SET_ISA_EXT_MAP ("smaia" ,RISCV_ISA_EXT_SMAIA ); +SET_ISA_EXT_MAP ("ssaia" ,RISCV_ISA_EXT_SSAIA ); }#undef SET_ISA_EXT_MAP }
Signature · 7 lines
2.34.1 _______________________________________________ linux-riscv mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-riscv
Re: [PATCH 2/9] RISC-V: Detect AIA CSRs from ISA string
Quoted 39 lines · Anup Patel
We have two extension names for AIA ISA support: Smaia (M-mode AIA CSRs) and Ssaia (S-mode AIA CSRs).
We extend the ISA string parsing to detect Smaia and Ssaia extensions.
Signed-off-by Anup Patel <[email protected]>--- arch/riscv/include/asm/hwcap.h | 8 ++++++++ arch/riscv/kernel/cpu.c | 2 ++ arch/riscv/kernel/cpufeature.c | 2 ++ 3 files changed, 12 insertions(+)arch/riscv/include/asm/hwcap.h +8
-0@@ -59,9 +59,17 @@ enum riscv_isa_ext_id {RISCV_ISA_EXT_ZIHINTPAUSE ,RISCV_ISA_EXT_SSTC ,RISCV_ISA_EXT_SVINVAL , +RISCV_ISA_EXT_SSAIA , +RISCV_ISA_EXT_SMAIA , RISCV_ISA_EXT_ID_MAX = RISCV_ISA_EXT_MAX, }; +#ifdef CONFIG_RISCV_M_MODE +#define RISCV_ISA_EXT_SxAIA RISCV_ISA_EXT_SMAIA +#else +#define RISCV_ISA_EXT_SxAIA RISCV_ISA_EXT_SSAIA +#endif +/* * This enum represents the logical ID for each RISC-V ISA extension static * keys. We can use static key to optimize code path if some ISA extensions arch/riscv/kernel/cpu.c +0
-0
arch/riscv/kernel/cpu.c device_initcall(riscv_cpuinfo_init); · line 142
Quoted 5 lines
arch/riscv/kernel/cpu.c +2
-0@@ -138,6 +138,8 @@ device_initcall(riscv_cpuinfo_init);* extensions by an underscore. */ static struct riscv_isa_ext_data isa_ext_arr[] = { +__RISCV_ISA_EXT_DATA (smaia,RISCV_ISA_EXT_SMAIA ), +__RISCV_ISA_EXT_DATA (ssaia,RISCV_ISA_EXT_SSAIA ),
Trivially minor question: Is there a reason you added these before after svinval elsewhere but before it here?
Quoted 19 lines
arch/riscv/kernel/cpu.c +0
-0__RISCV_ISA_EXT_DATA (sscofpmf,RISCV_ISA_EXT_SSCOFPMF ),__RISCV_ISA_EXT_DATA (sstc,RISCV_ISA_EXT_SSTC ), __RISCV_ISA_EXT_DATA(svinval, RISCV_ISA_EXT_SVINVAL),arch/riscv/kernel/cpufeature.c +2
-0@@ -205,6 +205,8 @@ void __init riscv_fill_hwcap(void)SET_ISA_EXT_MAP ("zihintpause" ,RISCV_ISA_EXT_ZIHINTPAUSE );SET_ISA_EXT_MAP ("sstc" ,RISCV_ISA_EXT_SSTC );SET_ISA_EXT_MAP ("svinval" ,RISCV_ISA_EXT_SVINVAL ); +SET_ISA_EXT_MAP ("smaia" ,RISCV_ISA_EXT_SMAIA ); +SET_ISA_EXT_MAP ("ssaia" ,RISCV_ISA_EXT_SSAIA ); }#undef SET_ISA_EXT_MAP }Signature · 1 line
2.34.1
PATCH 3/9 irqchip/riscv-intc: Add support for RISC-V AIA
In reply to Anup PatelThe RISC-V advanced interrupt architecture (AIA) extends the per-HART local interrupts in following ways:
1. Minimum 64 local interrupts for both RV32 and RV64
2. Ability to process multiple pending local interrupts in same interrupt handler
3. Priority configuration for each local interrupts
4. Special CSRs to configure/access the per-HART MSI controller
This patch adds support for RISC-V AIA in the RISC-V intc driver.
--- drivers/irqchip/irq-riscv-intc.c | 37 ++++++++++++++++++++++++++------ 1 file changed, 31 insertions(+), 6 deletions(-)
drivers/irqchip/irq-riscv-intc.c +31 -6
@@ -16,6 +16,7 @@#include <linux/module.h> #include <linux/of.h> #include <linux/smp.h> +#include <asm/hwcap.h> static struct irq_domain *intc_domain;
@@ -29,6 +30,15 @@ static asmlinkage void riscv_intc_irq(struct pt_regs *regs)generic_handle_domain_irq (intc_domain, cause); } +static asmlinkage void riscv_intc_aia_irq(struct pt_regs *regs) +{ +unsigned long topi; + +while ((topi =csr_read (CSR_TOPI ))) +generic_handle_domain_irq (intc_domain, + topi >>TOPI_IID_SHIFT ); +} +/* * On RISC-V systems local interrupts are masked or unmasked by writing * the SIE (Supervisor Interrupt Enable) CSR. As CSRs can only be written
@@ -38,12 +48,18 @@ static asmlinkage void riscv_intc_irq(struct pt_regs *regs)static void riscv_intc_irq_mask (struct irq_data *d) { -csr_clear (CSR_IE ,BIT (d->hwirq)); +if (d->hwirq <BITS_PER_LONG ) +csr_clear (CSR_IE ,BIT (d->hwirq)); +else +csr_clear (CSR_IEH ,BIT (d->hwirq -BITS_PER_LONG )); }static void riscv_intc_irq_unmask (struct irq_data *d) { -csr_set (CSR_IE ,BIT (d->hwirq)); +if (d->hwirq <BITS_PER_LONG ) +csr_set (CSR_IE ,BIT (d->hwirq)); +else +csr_set (CSR_IEH ,BIT (d->hwirq -BITS_PER_LONG )); }static struct irq_chip riscv_intc_chip = {
@@ -98,7 +114,7 @@ static struct fwnode_handle *riscv_intc_hwnode(void)static int __init riscv_intc_init (struct device_node *node,struct device_node *parent) { -int rc; +int rc, nr_irqs;unsigned long hartid; rc =riscv_of_parent_hartid (node, &hartid);
@@ -116,14 +132,21 @@ static int __init riscv_intc_init(struct device_node *node,if (riscv_hartid_to_cpuid (hartid) !=smp_processor_id ())return 0 ; - intc_domain =irq_domain_add_linear (node,BITS_PER_LONG , + nr_irqs =BITS_PER_LONG ; +if (riscv_isa_extension_available (NULL , SxAIA) &&BITS_PER_LONG ==32 ) + nr_irqs = nr_irqs *2 ; + + intc_domain =irq_domain_add_linear (node, nr_irqs, &riscv_intc_domain_ops,NULL );if (!intc_domain) {pr_err ("unable to add IRQ domain\n" );return -ENXIO ; } - rc =set_handle_irq (&riscv_intc_irq); +if (riscv_isa_extension_available (NULL , SxAIA)) + rc =set_handle_irq (&riscv_intc_aia_irq); +else + rc =set_handle_irq (&riscv_intc_irq);if (rc) {pr_err ("failed to set irq handler\n" );return rc;
@@ -131,7 +154,9 @@ static int __init riscv_intc_init(struct device_node *node,riscv_set_intc_hwnode_fn (riscv_intc_hwnode); -pr_info ("%d local interrupts mapped\n" ,BITS_PER_LONG ); +pr_info ("%d local interrupts mapped%s\n" , + nr_irqs, (riscv_isa_extension_available (NULL , SxAIA)) ? +" using AIA" :"" );return 0 ; }
Signature · 7 lines
2.34.1 _______________________________________________ linux-riscv mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-riscv
PATCH 4/9 dt-bindings: Add RISC-V incoming MSI controller bindings
In reply to Anup PatelWe add DT bindings document for RISC-V incoming MSI controller (IMSIC) defined by the RISC-V advanced interrupt architecture (AIA) specification.
--- .../interrupt-controller/riscv,imsic.yaml | 174 ++++++++++++++++++ 1 file changed, 174 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +174 -0
@@ -0,0 +1,174 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/riscv,imsic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RISC-V Incoming MSI Controller (IMSIC) + +maintainers: + - Anup Patel <[email protected]> + +description: + The RISC-V advanced interrupt architecture (AIA) defines a per-CPU incoming + MSI controller (IMSIC) for handling MSIs in a RISC-V platform. The RISC-V + AIA specification can be found at https://github.com/riscv/riscv-aia. + + The IMSIC is a per-CPU (or per-HART) device with separate interrupt file + for each privilege level (machine or supervisor). The configuration of + a IMSIC interrupt file is done using AIA CSRs and it also has a 4KB MMIO + space to receive MSIs from devices. Each IMSIC interrupt file supports a + fixed number of interrupt identities (to distinguish MSIs from devices) + which is same for given privilege level across CPUs (or HARTs). + + The arrangement of IMSIC interrupt files in MMIO space of a RISC-V platform + follows a particular scheme defined by the RISC-V AIA specification. A IMSIC + group is a set of IMSIC interrupt files co-located in MMIO space and we can + have multiple IMSIC groups (i.e. clusters, sockets, chiplets, etc) in a + RISC-V platform. The MSI target address of a IMSIC interrupt file at given + privilege level (machine or supervisor) encodes group index, HART index, + and guest index (shown below). + + XLEN-1 >=24 12 0 + | | | | + ------------------------------------------------------------- + |xxxxxx|Group Index|xxxxxxxxxxx|HART Index|Guest Index| 0 | + ------------------------------------------------------------- + + The device tree of a RISC-V platform will have one IMSIC device tree node + for each privilege level (machine or supervisor) which collectively describe + IMSIC interrupt files at that privilege level across CPUs (or HARTs). + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + compatible: + items: + - enum: + - vendor,chip-imsics + - const: riscv,imsics + + reg: + minItems: 1 + maxItems: 128 + description: + Base address of each IMSIC group. + + interrupt-controller: true + + "#interrupt-cells": + const: 0 + + msi-controller: true + + interrupts-extended: + minItems: 1 + maxItems: 32768 + description: + This property represents the set of CPUs (or HARTs) for which given + device tree node describes the IMSIC interrupt files. Each node pointed + to should be a riscv,cpu-intc node, which has a riscv node (i.e. RISC-V + HART) as parent. + + riscv,num-ids: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 63 + maximum: 2047 + description: + Specifies how many interrupt identities are supported by IMSIC interrupt + file. + + riscv,num-guest-ids: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 63 + maximum: 2047 + description: + Specifies how many interrupt identities are supported by IMSIC guest + interrupt file. When not specified the number of interrupt identities + supported by IMSIC guest file is assumed to be same as specified by + the riscv,num-ids property. + + riscv,slow-ipi: + type: boolean + description: + The presence of this property implies that software interrupts (i.e. + IPIs) using IMSIC software injected MSIs is slower compared to other + software interrupt mechanisms (such as SBI IPI) on the underlying + RISC-V platform. + + riscv,guest-index-bits: + minimum: 0 + maximum: 7 + description: + Specifies number of guest index bits in the MSI target address. When + not specified it is assumed to be 0. + + riscv,hart-index-bits: + minimum: 0 + maximum: 15 + description: + Specifies number of HART index bits in the MSI target address. When + not specified it is estimated based on the interrupts-extended property. + + riscv,group-index-bits: + minimum: 0 + maximum: 7 + description: + Specifies number of group index bits in the MSI target address. When + not specified it is assumed to be 0. + + riscv,group-index-shift: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 24 + maximum: 55 + description: + Specifies the least significant bit of the group index bits in the + MSI target address. When not specified it is assumed to be 24. + +additionalProperties: false + +required: + - compatible + - reg + - interrupt-controller + - msi-controller + - interrupts-extended + - riscv,num-ids + +examples: + - | + // Example 1 (Machine-level IMSIC files with just one group): + + imsic_mlevel: interrupt-controller@24000000 { + compatible = "vendor,chip-imsics", "riscv,imsics"; + interrupts-extended = <&cpu1_intc 11>, + <&cpu2_intc 11>, + <&cpu3_intc 11>, + <&cpu4_intc 11>; + reg = <0x28000000 0x4000>; + interrupt-controller; + #interrupt-cells = <0>; + msi-controller; + riscv,num-ids = <127>; + }; + + - | + // Example 2 (Supervisor-level IMSIC files with two groups): + + imsic_slevel: interrupt-controller@28000000 { + compatible = "vendor,chip-imsics", "riscv,imsics"; + interrupts-extended = <&cpu1_intc 9>, + <&cpu2_intc 9>, + <&cpu3_intc 9>, + <&cpu4_intc 9>; + reg = <0x28000000 0x2000>, /* Group0 IMSICs */ + <0x29000000 0x2000>; /* Group1 IMSICs */ + interrupt-controller; + #interrupt-cells = <0>; + msi-controller; + riscv,num-ids = <127>; + riscv,group-index-bits = <1>; + riscv,group-index-shift = <24>; + }; +...
Signature · 7 lines
2.34.1 _______________________________________________ linux-riscv mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-riscv
Re: [PATCH 4/9] dt-bindings: Add RISC-V incoming MSI controller bindings
Quoted 155 lines · Anup Patel
We add DT bindings document for RISC-V incoming MSI controller (IMSIC) defined by the RISC-V advanced interrupt architecture (AIA) specification.
Signed-off-by Anup Patel <[email protected]>--- .../interrupt-controller/riscv,imsic.yaml | 174 ++++++++++++++++++ 1 file changed, 174 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yamlDocumentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +139
-0@@ -0,0 +1,174 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/riscv,imsic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RISC-V Incoming MSI Controller (IMSIC) + +maintainers: + - Anup Patel <[email protected]> + +description: + The RISC-V advanced interrupt architecture (AIA) defines a per-CPU incoming + MSI controller (IMSIC) for handling MSIs in a RISC-V platform. The RISC-V + AIA specification can be found at https://github.com/riscv/riscv-aia. + + The IMSIC is a per-CPU (or per-HART) device with separate interrupt file + for each privilege level (machine or supervisor). The configuration of + a IMSIC interrupt file is done using AIA CSRs and it also has a 4KB MMIO + space to receive MSIs from devices. Each IMSIC interrupt file supports a + fixed number of interrupt identities (to distinguish MSIs from devices) + which is same for given privilege level across CPUs (or HARTs). + + The arrangement of IMSIC interrupt files in MMIO space of a RISC-V platform + follows a particular scheme defined by the RISC-V AIA specification. A IMSIC + group is a set of IMSIC interrupt files co-located in MMIO space and we can + have multiple IMSIC groups (i.e. clusters, sockets, chiplets, etc) in a + RISC-V platform. The MSI target address of a IMSIC interrupt file at given + privilege level (machine or supervisor) encodes group index, HART index, + and guest index (shown below). + + XLEN-1 >=24 12 0 + | | | | + ------------------------------------------------------------- + |xxxxxx|Group Index|xxxxxxxxxxx|HART Index|Guest Index| 0 | + ------------------------------------------------------------- + + The device tree of a RISC-V platform will have one IMSIC device tree node + for each privilege level (machine or supervisor) which collectively describe + IMSIC interrupt files at that privilege level across CPUs (or HARTs). + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + compatible: + items: + - enum: + - vendor,chip-imsics + - const: riscv,imsics + + reg: + minItems: 1 + maxItems: 128 + description: + Base address of each IMSIC group. + + interrupt-controller: true + + "#interrupt-cells": + const: 0 + + msi-controller: true + + interrupts-extended: + minItems: 1 + maxItems: 32768 + description: + This property represents the set of CPUs (or HARTs) for which given + device tree node describes the IMSIC interrupt files. Each node pointed + to should be a riscv,cpu-intc node, which has a riscv node (i.e. RISC-V + HART) as parent. + + riscv,num-ids: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 63 + maximum: 2047 + description: + Specifies how many interrupt identities are supported by IMSIC interrupt + file. + + riscv,num-guest-ids: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 63 + maximum: 2047 + description: + Specifies how many interrupt identities are supported by IMSIC guest + interrupt file. When not specified the number of interrupt identities + supported by IMSIC guest file is assumed to be same as specified by + the riscv,num-ids property. + + riscv,slow-ipi: + type: boolean + description: + The presence of this property implies that software interrupts (i.e. + IPIs) using IMSIC software injected MSIs is slower compared to other + software interrupt mechanisms (such as SBI IPI) on the underlying + RISC-V platform. + + riscv,guest-index-bits: + minimum: 0 + maximum: 7 + description: + Specifies number of guest index bits in the MSI target address. When + not specified it is assumed to be 0. + + riscv,hart-index-bits: + minimum: 0 + maximum: 15 + description: + Specifies number of HART index bits in the MSI target address. When + not specified it is estimated based on the interrupts-extended property. + + riscv,group-index-bits: + minimum: 0 + maximum: 7 + description: + Specifies number of group index bits in the MSI target address. When + not specified it is assumed to be 0. + + riscv,group-index-shift: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 24 + maximum: 55 + description: + Specifies the least significant bit of the group index bits in the + MSI target address. When not specified it is assumed to be 24. + +additionalProperties: false + +required: + - compatible + - reg + - interrupt-controller + - msi-controller + - interrupts-extended + - riscv,num-ids + +examples:
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml line 149
Quoted 10 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +10
-0+ - | + // Example 1 (Machine-level IMSIC files with just one group): + + imsic_mlevel: interrupt-controller@24000000 { + compatible = "vendor,chip-imsics", "riscv,imsics"; + interrupts-extended = <&cpu1_intc 11>, + <&cpu2_intc 11>, + <&cpu3_intc 11>, + <&cpu4_intc 11>; + reg = <0x28000000 0x4000>;
nit: /s/0x28000000/24000000
Quoted 28 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +25
-1+ interrupt-controller; + #interrupt-cells = <0>; + msi-controller; + riscv,num-ids = <127>; + }; + + - | + // Example 2 (Supervisor-level IMSIC files with two groups): + + imsic_slevel: interrupt-controller@28000000 { + compatible = "vendor,chip-imsics", "riscv,imsics"; + interrupts-extended = <&cpu1_intc 9>, + <&cpu2_intc 9>, + <&cpu3_intc 9>, + <&cpu4_intc 9>; + reg = <0x28000000 0x2000>, /* Group0 IMSICs */ + <0x29000000 0x2000>; /* Group1 IMSICs */ + interrupt-controller; + #interrupt-cells = <0>; + msi-controller; + riscv,num-ids = <127>; + riscv,group-index-bits = <1>; + riscv,group-index-shift = <24>; + }; +... --2.34.1
Signature · 2 lines
Regards, Atish
Re: [PATCH 4/9] dt-bindings: Add RISC-V incoming MSI controller bindings
In reply to Anup PatelHey Anup,
Quoted 1 line · Anup Patel
dt-bindings: Add RISC-V incoming MSI controller bindings
nit: it looks like the usual prefix here is "dt-bindings:
interrupt-controller".
Quoted 17 lines
We add DT bindings document for RISC-V incoming MSI controller (IMSIC) defined by the RISC-V advanced interrupt architecture (AIA) specification.
Signed-off-by Anup Patel <[email protected]>--- .../interrupt-controller/riscv,imsic.yaml | 174 ++++++++++++++++++ 1 file changed, 174 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yamlDocumentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +2
-0@@ -0,0 +1,174 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml line 12
Quoted 10 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +10
-0+--- +$id: http://devicetree.org/schemas/interrupt-controller/riscv,imsic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RISC-V Incoming MSI Controller (IMSIC) + +maintainers: + - Anup Patel <[email protected]> + +description:
Is this one of the situations where we want to have a | after "description:" to preserve formatting?
Quoted 27 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +27
-0+ The RISC-V advanced interrupt architecture (AIA) defines a per-CPU incoming + MSI controller (IMSIC) for handling MSIs in a RISC-V platform. The RISC-V + AIA specification can be found at https://github.com/riscv/riscv-aia. + + The IMSIC is a per-CPU (or per-HART) device with separate interrupt file + for each privilege level (machine or supervisor). The configuration of + a IMSIC interrupt file is done using AIA CSRs and it also has a 4KB MMIO + space to receive MSIs from devices. Each IMSIC interrupt file supports a + fixed number of interrupt identities (to distinguish MSIs from devices) + which is same for given privilege level across CPUs (or HARTs). + + The arrangement of IMSIC interrupt files in MMIO space of a RISC-V platform + follows a particular scheme defined by the RISC-V AIA specification. A IMSIC + group is a set of IMSIC interrupt files co-located in MMIO space and we can + have multiple IMSIC groups (i.e. clusters, sockets, chiplets, etc) in a + RISC-V platform. The MSI target address of a IMSIC interrupt file at given + privilege level (machine or supervisor) encodes group index, HART index, + and guest index (shown below). + + XLEN-1 >=24 12 0 + | | | | + ------------------------------------------------------------- + |xxxxxx|Group Index|xxxxxxxxxxx|HART Index|Guest Index| 0 | + ------------------------------------------------------------- + + The device tree of a RISC-V platform will have one IMSIC device tree node + for each privilege level (machine or supervisor) which collectively describe
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml line 49
Quoted 10 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +10
-0+ IMSIC interrupt files at that privilege level across CPUs (or HARTs). + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + compatible: + items: + - enum: + - vendor,chip-imsics
Is it valid to have a dummy here? I did a bit of grepping & could not see a single other yaml binding which used a placeholder like this - other than the example schema itself. I assume you're trying to get across the point that using the bare riscv,imsics is not okay and a vendor should create a custom string for their implementation?
Also, the file name says "riscv,imsic", the description says "IMSIC" but you've used "imsics" in the compatible. Is this a typo, or a plural?
Thanks,
Conor.
Quoted 133 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +125
-0+ - const: riscv,imsics + + reg: + minItems: 1 + maxItems: 128 + description: + Base address of each IMSIC group. + + interrupt-controller: true + + "#interrupt-cells": + const: 0 + + msi-controller: true + + interrupts-extended: + minItems: 1 + maxItems: 32768 + description: + This property represents the set of CPUs (or HARTs) for which given + device tree node describes the IMSIC interrupt files. Each node pointed + to should be a riscv,cpu-intc node, which has a riscv node (i.e. RISC-V + HART) as parent. + + riscv,num-ids: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 63 + maximum: 2047 + description: + Specifies how many interrupt identities are supported by IMSIC interrupt + file. + + riscv,num-guest-ids: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 63 + maximum: 2047 + description: + Specifies how many interrupt identities are supported by IMSIC guest + interrupt file. When not specified the number of interrupt identities + supported by IMSIC guest file is assumed to be same as specified by + the riscv,num-ids property. + + riscv,slow-ipi: + type: boolean + description: + The presence of this property implies that software interrupts (i.e. + IPIs) using IMSIC software injected MSIs is slower compared to other + software interrupt mechanisms (such as SBI IPI) on the underlying + RISC-V platform. + + riscv,guest-index-bits: + minimum: 0 + maximum: 7 + description: + Specifies number of guest index bits in the MSI target address. When + not specified it is assumed to be 0. + + riscv,hart-index-bits: + minimum: 0 + maximum: 15 + description: + Specifies number of HART index bits in the MSI target address. When + not specified it is estimated based on the interrupts-extended property. + + riscv,group-index-bits: + minimum: 0 + maximum: 7 + description: + Specifies number of group index bits in the MSI target address. When + not specified it is assumed to be 0. + + riscv,group-index-shift: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 24 + maximum: 55 + description: + Specifies the least significant bit of the group index bits in the + MSI target address. When not specified it is assumed to be 24. + +additionalProperties: false + +required: + - compatible + - reg + - interrupt-controller + - msi-controller + - interrupts-extended + - riscv,num-ids + +examples: + - | + // Example 1 (Machine-level IMSIC files with just one group): + + imsic_mlevel: interrupt-controller@24000000 { + compatible = "vendor,chip-imsics", "riscv,imsics"; + interrupts-extended = <&cpu1_intc 11>, + <&cpu2_intc 11>, + <&cpu3_intc 11>, + <&cpu4_intc 11>; + reg = <0x28000000 0x4000>; + interrupt-controller; + #interrupt-cells = <0>; + msi-controller; + riscv,num-ids = <127>; + }; + + - | + // Example 2 (Supervisor-level IMSIC files with two groups): + + imsic_slevel: interrupt-controller@28000000 { + compatible = "vendor,chip-imsics", "riscv,imsics"; + interrupts-extended = <&cpu1_intc 9>, + <&cpu2_intc 9>, + <&cpu3_intc 9>, + <&cpu4_intc 9>; + reg = <0x28000000 0x2000>, /* Group0 IMSICs */ + <0x29000000 0x2000>; /* Group1 IMSICs */ + interrupt-controller; + #interrupt-cells = <0>; + msi-controller; + riscv,num-ids = <127>; + riscv,group-index-bits = <1>; + riscv,group-index-shift = <24>; + }; +...Signature · 7 lines
2.34.1 _______________________________________________ linux-riscv mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-riscv
Re: [PATCH 4/9] dt-bindings: Add RISC-V incoming MSI controller bindings
Quoted 8 lines · Conor Dooley
Hey Anup,
Quoted 1 line · Anup Patel
dt-bindings: Add RISC-V incoming MSI controller bindings
nit: it looks like the usual prefix here is "dt-bindings:
interrupt-controller".
Okay, I will update.
Quoted 23 lines
Quoted 23 lines
We add DT bindings document for RISC-V incoming MSI controller (IMSIC) defined by the RISC-V advanced interrupt architecture (AIA) specification.
Signed-off-by Anup Patel <[email protected]>--- .../interrupt-controller/riscv,imsic.yaml | 174 ++++++++++++++++++ 1 file changed, 174 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yamlDocumentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +7
-0@@ -0,0 +1,174 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/riscv,imsic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RISC-V Incoming MSI Controller (IMSIC)
Quoted 8 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml line 12
Quoted 5 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +5
-0+ +maintainers: + - Anup Patel <[email protected]> + +description:Is this one of the situations where we want to have a | after "description:" to preserve formatting?
Okay, I will update.
Quoted 36 lines
Quoted 36 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +35
-0+ The RISC-V advanced interrupt architecture (AIA) defines a per-CPU incoming + MSI controller (IMSIC) for handling MSIs in a RISC-V platform. The RISC-V + AIA specification can be found at https://github.com/riscv/riscv-aia. + + The IMSIC is a per-CPU (or per-HART) device with separate interrupt file + for each privilege level (machine or supervisor). The configuration of + a IMSIC interrupt file is done using AIA CSRs and it also has a 4KB MMIO + space to receive MSIs from devices. Each IMSIC interrupt file supports a + fixed number of interrupt identities (to distinguish MSIs from devices) + which is same for given privilege level across CPUs (or HARTs). + + The arrangement of IMSIC interrupt files in MMIO space of a RISC-V platform + follows a particular scheme defined by the RISC-V AIA specification. A IMSIC + group is a set of IMSIC interrupt files co-located in MMIO space and we can + have multiple IMSIC groups (i.e. clusters, sockets, chiplets, etc) in a + RISC-V platform. The MSI target address of a IMSIC interrupt file at given + privilege level (machine or supervisor) encodes group index, HART index, + and guest index (shown below). + + XLEN-1 >=24 12 0 + | | | | + ------------------------------------------------------------- + |xxxxxx|Group Index|xxxxxxxxxxx|HART Index|Guest Index| 0 | + ------------------------------------------------------------- + + The device tree of a RISC-V platform will have one IMSIC device tree node + for each privilege level (machine or supervisor) which collectively describe + IMSIC interrupt files at that privilege level across CPUs (or HARTs). + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + compatible: + items:
Quoted 8 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml line 49
Quoted 2 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +2
-0+ - enum: + - vendor,chip-imsicsIs it valid to have a dummy here? I did a bit of grepping & could not see a single other yaml binding which used a placeholder like this - other than the example schema itself. I assume you're trying to get across the point that using the bare riscv,imsics is not okay and a vendor should create a custom string for their implementation?
Yes, this dummy is a placeholder to mandate two compatible strings. The dummy can eventually be replaced by some actual implementation compatible string.
Quoted 3 lines
Also, the file name says "riscv,imsic", the description says "IMSIC" but you've used "imsics" in the compatible. Is this a typo, or a plural?
Yes, the file name should be consistent. I will update the file name.
Quoted 133 lines
Thanks,
Conor.Quoted 129 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +125
-1+ - const: riscv,imsics + + reg: + minItems: 1 + maxItems: 128 + description: + Base address of each IMSIC group. + + interrupt-controller: true + + "#interrupt-cells": + const: 0 + + msi-controller: true + + interrupts-extended: + minItems: 1 + maxItems: 32768 + description: + This property represents the set of CPUs (or HARTs) for which given + device tree node describes the IMSIC interrupt files. Each node pointed + to should be a riscv,cpu-intc node, which has a riscv node (i.e. RISC-V + HART) as parent. + + riscv,num-ids: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 63 + maximum: 2047 + description: + Specifies how many interrupt identities are supported by IMSIC interrupt + file. + + riscv,num-guest-ids: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 63 + maximum: 2047 + description: + Specifies how many interrupt identities are supported by IMSIC guest + interrupt file. When not specified the number of interrupt identities + supported by IMSIC guest file is assumed to be same as specified by + the riscv,num-ids property. + + riscv,slow-ipi: + type: boolean + description: + The presence of this property implies that software interrupts (i.e. + IPIs) using IMSIC software injected MSIs is slower compared to other + software interrupt mechanisms (such as SBI IPI) on the underlying + RISC-V platform. + + riscv,guest-index-bits: + minimum: 0 + maximum: 7 + description: + Specifies number of guest index bits in the MSI target address. When + not specified it is assumed to be 0. + + riscv,hart-index-bits: + minimum: 0 + maximum: 15 + description: + Specifies number of HART index bits in the MSI target address. When + not specified it is estimated based on the interrupts-extended property. + + riscv,group-index-bits: + minimum: 0 + maximum: 7 + description: + Specifies number of group index bits in the MSI target address. When + not specified it is assumed to be 0. + + riscv,group-index-shift: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 24 + maximum: 55 + description: + Specifies the least significant bit of the group index bits in the + MSI target address. When not specified it is assumed to be 24. + +additionalProperties: false + +required: + - compatible + - reg + - interrupt-controller + - msi-controller + - interrupts-extended + - riscv,num-ids + +examples: + - | + // Example 1 (Machine-level IMSIC files with just one group): + + imsic_mlevel: interrupt-controller@24000000 { + compatible = "vendor,chip-imsics", "riscv,imsics"; + interrupts-extended = <&cpu1_intc 11>, + <&cpu2_intc 11>, + <&cpu3_intc 11>, + <&cpu4_intc 11>; + reg = <0x28000000 0x4000>; + interrupt-controller; + #interrupt-cells = <0>; + msi-controller; + riscv,num-ids = <127>; + }; + + - | + // Example 2 (Supervisor-level IMSIC files with two groups): + + imsic_slevel: interrupt-controller@28000000 { + compatible = "vendor,chip-imsics", "riscv,imsics"; + interrupts-extended = <&cpu1_intc 9>, + <&cpu2_intc 9>, + <&cpu3_intc 9>, + <&cpu4_intc 9>; + reg = <0x28000000 0x2000>, /* Group0 IMSICs */ + <0x29000000 0x2000>; /* Group1 IMSICs */ + interrupt-controller; + #interrupt-cells = <0>; + msi-controller; + riscv,num-ids = <127>; + riscv,group-index-bits = <1>; + riscv,group-index-shift = <24>; + }; +... --2.34.1
Quoted 4 lines
Quoted 4 lines
_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv
Regards,
Anup
Re: [PATCH 4/9] dt-bindings: Add RISC-V incoming MSI controller bindings
Quoted 6 lines · Anup Patel
Quoted 2 lines · Conor Dooley
Also, the file name says "riscv,imsic", the description says "IMSIC" but you've used "imsics" in the compatible. Is this a typo, or a plural?
Yes, the file name should be consistent. I will update the file name.
Is there a reason why the compatible is plural when all of the other mentions etc do not have an "s"? It really did look like a typo to me.
It's the "incoming MSI controller", so I am unsure as to where the "s" actually even comes from. Why not just use "riscv,imsic"?
Thanks,
Conor.
_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv
Re: [PATCH 4/9] dt-bindings: Add RISC-V incoming MSI controller bindings
Quoted 6 lines · Conor Dooley
Quoted 5 lines · Anup Patel
Quoted 2 lines · Conor Dooley
Also, the file name says "riscv,imsic", the description says "IMSIC" but you've used "imsics" in the compatible. Is this a typo, or a plural?
Quoted 7 lines
Quoted 1 line
Yes, the file name should be consistent. I will update the file name.
Is there a reason why the compatible is plural when all of the other mentions etc do not have an "s"? It really did look like a typo to me.
It's the "incoming MSI controller", so I am unsure as to where the "s" actually even comes from. Why not just use "riscv,imsic"?
Yep, should be rather consistent with all others, and IMSIC stands for Integrated Circuit?
Best regards,
Krzysztof
Re: [PATCH 4/9] dt-bindings: Add RISC-V incoming MSI controller bindings
Quoted 9 lines · Krzysztof Kozlowski
Quoted 8 lines · Conor Dooley
Quoted 6 lines · Anup Patel
Quoted 2 lines · Conor Dooley
Also, the file name says "riscv,imsic", the description says "IMSIC" but you've used "imsics" in the compatible. Is this a typo, or a plural?
Yes, the file name should be consistent. I will update the file name.
Quoted 8 lines
Quoted 5 lines
Is there a reason why the compatible is plural when all of the other mentions etc do not have an "s"? It really did look like a typo to me.
It's the "incoming MSI controller", so I am unsure as to where the "s" actually even comes from. Why not just use "riscv,imsic"?
Yep, should be rather consistent with all others, and IMSIC stands for Integrated Circuit?
Incoming Message Signalled Interrupts Controller, no?
Re: [PATCH 4/9] dt-bindings: Add RISC-V incoming MSI controller bindings
Quoted 13 lines · Conor Dooley
Quoted 12 lines · Krzysztof Kozlowski
Quoted 11 lines · Conor Dooley
Quoted 6 lines · Anup Patel
Quoted 2 lines · Conor Dooley
Also, the file name says "riscv,imsic", the description says "IMSIC" but you've used "imsics" in the compatible. Is this a typo, or a plural?
Yes, the file name should be consistent. I will update the file name.
Is there a reason why the compatible is plural when all of the other mentions etc do not have an "s"? It really did look like a typo to me.
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
It's the "incoming MSI controller", so I am unsure as to where the "s" actually even comes from. Why not just use "riscv,imsic"?
Yep, should be rather consistent with all others, and IMSIC stands for Integrated Circuit?
Incoming Message Signalled Interrupts Controller, no?
Ah, then still singular :)
Best regards,
Krzysztof
Re: [PATCH 4/9] dt-bindings: Add RISC-V incoming MSI controller bindings
In reply to Krzysztof KozlowskiQuoted 10 lines · Krzysztof Kozlowski
Quoted 8 lines · Conor Dooley
Quoted 6 lines · Anup Patel
Quoted 2 lines · Conor Dooley
Also, the file name says "riscv,imsic", the description says "IMSIC" but you've used "imsics" in the compatible. Is this a typo, or a plural?
Yes, the file name should be consistent. I will update the file name.
Quoted 8 lines
Quoted 5 lines
Is there a reason why the compatible is plural when all of the other mentions etc do not have an "s"? It really did look like a typo to me.
It's the "incoming MSI controller", so I am unsure as to where the "s" actually even comes from. Why not just use "riscv,imsic"?
Yep, should be rather consistent with all others, and IMSIC stands for Integrated Circuit?
This is intentionally plural because even though we have one IMSIC per-CPU, Linux (and various OSes) expect one DT node as MSI controller targeting all CPUs.
The plural compatible string "riscv,imsics" was chosen based on consensus on RISC-V AIA Task Group meetings.
Regards,
Anup
_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv
Re: [PATCH 4/9] dt-bindings: Add RISC-V incoming MSI controller bindings
Quoted 18 lines · Anup Patel
Quoted 16 lines · Krzysztof Kozlowski
Quoted 13 lines · Conor Dooley
Quoted 6 lines · Anup Patel
Quoted 2 lines · Conor Dooley
Also, the file name says "riscv,imsic", the description says "IMSIC" but you've used "imsics" in the compatible. Is this a typo, or a plural?
Yes, the file name should be consistent. I will update the file name.
Is there a reason why the compatible is plural when all of the other mentions etc do not have an "s"? It really did look like a typo to me.
It's the "incoming MSI controller", so I am unsure as to where the "s" actually even comes from. Why not just use "riscv,imsic"?
Quoted 6 lines
Quoted 2 lines
Yep, should be rather consistent with all others, and IMSIC stands for Integrated Circuit?
This is intentionally plural because even though we have one IMSIC per-CPU, Linux (and various OSes) expect one DT node as MSI controller targeting all CPUs.
Even still, calling it "riscv,imsic" would seem fair to me given the multiple regs make the distinct regions clear.
I think I must have missed the bit at the end of the description though:
+ The device tree of a RISC-V platform will have one IMSIC device tree node + for each privilege level (machine or supervisor) which collectively describe + IMSIC interrupt files at that privilege level across CPUs (or HARTs).
Perhaps, for eejits like me, that paragraph should become paragraph 3 instead of hiding it below the register layout etc?
Anyways, existing name seems fine to me then w/ the filename update & increased prominence of the many-controllers-in-one statement.
Maybe the devicetree gods think differently!
Quoted 2 lines
The plural compatible string "riscv,imsics" was chosen based on consensus on RISC-V AIA Task Group meetings.
btw, I see the following in the example:
+ reg = <0x28000000 0x2000>, /* Group0 IMSICs */
+ <0x29000000 0x2000>; /* Group1 IMSICs */
And in the property:
+ reg:
+ minItems: 1 + maxItems: 128 + description:
+ Base address of each IMSIC group.
It would appear that the comment there conflicts with the description of the reg property itself & it's that lack of consistency me confused (:
Should the comments be in the singular form?
Thanks,
Conor.
Re: [PATCH 4/9] dt-bindings: Add RISC-V incoming MSI controller bindings
In reply to Anup PatelQuoted 54 lines · Anup Patel
We add DT bindings document for RISC-V incoming MSI controller (IMSIC) defined by the RISC-V advanced interrupt architecture (AIA) specification.
Signed-off-by Anup Patel <[email protected]>--- .../interrupt-controller/riscv,imsic.yaml | 174 ++++++++++++++++++ 1 file changed, 174 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yamlDocumentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +39
-0@@ -0,0 +1,174 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/riscv,imsic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RISC-V Incoming MSI Controller (IMSIC) + +maintainers: + - Anup Patel <[email protected]> + +description: + The RISC-V advanced interrupt architecture (AIA) defines a per-CPU incoming + MSI controller (IMSIC) for handling MSIs in a RISC-V platform. The RISC-V + AIA specification can be found at https://github.com/riscv/riscv-aia. + + The IMSIC is a per-CPU (or per-HART) device with separate interrupt file + for each privilege level (machine or supervisor). The configuration of + a IMSIC interrupt file is done using AIA CSRs and it also has a 4KB MMIO + space to receive MSIs from devices. Each IMSIC interrupt file supports a + fixed number of interrupt identities (to distinguish MSIs from devices) + which is same for given privilege level across CPUs (or HARTs). + + The arrangement of IMSIC interrupt files in MMIO space of a RISC-V platform + follows a particular scheme defined by the RISC-V AIA specification. A IMSIC + group is a set of IMSIC interrupt files co-located in MMIO space and we can + have multiple IMSIC groups (i.e. clusters, sockets, chiplets, etc) in a + RISC-V platform. The MSI target address of a IMSIC interrupt file at given + privilege level (machine or supervisor) encodes group index, HART index, + and guest index (shown below). + + XLEN-1 >=24 12 0 + | | | | + ------------------------------------------------------------- + |xxxxxx|Group Index|xxxxxxxxxxx|HART Index|Guest Index| 0 | + ------------------------------------------------------------- + + The device tree of a RISC-V platform will have one IMSIC device tree node + for each privilege level (machine or supervisor) which collectively describe
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml line 49
Quoted 10 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +10
-0+ IMSIC interrupt files at that privilege level across CPUs (or HARTs). + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + compatible: + items: + - enum: + - vendor,chip-imsics
There is no such vendor... As Conor pointed out, this does not look correct. Compatibles must be real and specific.
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml line 54
Quoted 5 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +5
-0+ - const: riscv,imsics + + reg: + minItems: 1 + maxItems: 128
Is there a DTS with 128 reg items?
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml line 63
Quoted 9 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +9
-0+ description: + Base address of each IMSIC group. + + interrupt-controller: true + + "#interrupt-cells": + const: 0 + + msi-controller: true
You want then msi-controller.yaml schema and you can drop properties described there.
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml line 67
Quoted 4 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +4
-0+ + interrupts-extended: + minItems: 1 + maxItems: 32768
I just wonder if you are not putting some random stuff here... just like this "vendor" company.
32768 inputs it is quite a big chip. Are you sure you have so many pins or internal connections?
Quoted 21 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +21
-0+ description: + This property represents the set of CPUs (or HARTs) for which given + device tree node describes the IMSIC interrupt files. Each node pointed + to should be a riscv,cpu-intc node, which has a riscv node (i.e. RISC-V + HART) as parent. + + riscv,num-ids: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 63 + maximum: 2047 + description: + Specifies how many interrupt identities are supported by IMSIC interrupt + file. + + riscv,num-guest-ids: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 63 + maximum: 2047 + description: + Specifies how many interrupt identities are supported by IMSIC guest + interrupt file. When not specified the number of interrupt identities
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml line 98
Quoted 10 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +10
-0+ supported by IMSIC guest file is assumed to be same as specified by + the riscv,num-ids property. + + riscv,slow-ipi: + type: boolean + description: + The presence of this property implies that software interrupts (i.e. + IPIs) using IMSIC software injected MSIs is slower compared to other + software interrupt mechanisms (such as SBI IPI) on the underlying + RISC-V platform.
Is this a property of software or hardware?
Quoted 11 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +11
-0+ + riscv,guest-index-bits: + minimum: 0 + maximum: 7 + description: + Specifies number of guest index bits in the MSI target address. When + not specified it is assumed to be 0. + + riscv,hart-index-bits: + minimum: 0 + maximum: 15
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml line 119
Quoted 10 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +10
-0+ description: + Specifies number of HART index bits in the MSI target address. When + not specified it is estimated based on the interrupts-extended property. + + riscv,group-index-bits: + minimum: 0 + maximum: 7 + description: + Specifies number of group index bits in the MSI target address. When + not specified it is assumed to be 0.
Then default: 0.
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml line 126
Quoted 7 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +7
-0+ + riscv,group-index-shift: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 24 + maximum: 55 + description: + Specifies the least significant bit of the group index bits in the
Please drop everywhere "Specifies the" and instead just describe the hardware.
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml line 129
Quoted 3 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +3
-0+ MSI target address. When not specified it is assumed to be 24. + +additionalProperties: false
unevaluatedProperties: false and drop all properties already described by other schemas.
Quoted 21 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +21
-0+ +required: + - compatible + - reg + - interrupt-controller + - msi-controller + - interrupts-extended + - riscv,num-ids + +examples: + - | + // Example 1 (Machine-level IMSIC files with just one group): + + imsic_mlevel: interrupt-controller@24000000 { + compatible = "vendor,chip-imsics", "riscv,imsics"; + interrupts-extended = <&cpu1_intc 11>, + <&cpu2_intc 11>, + <&cpu3_intc 11>, + <&cpu4_intc 11>; + reg = <0x28000000 0x4000>; + interrupt-controller;
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml line 160
Quoted 10 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +10
-0+ #interrupt-cells = <0>; + msi-controller; + riscv,num-ids = <127>; + }; + + - | + // Example 2 (Supervisor-level IMSIC files with two groups): + + imsic_slevel: interrupt-controller@28000000 { + compatible = "vendor,chip-imsics", "riscv,imsics";
Please run scripts/checkpatch.pl and fix reported warnings.
Best regards,
Krzysztof
_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv
Re: [PATCH 4/9] dt-bindings: Add RISC-V incoming MSI controller bindings
Quoted 61 lines · Krzysztof Kozlowski
Quoted 59 lines · Anup Patel
We add DT bindings document for RISC-V incoming MSI controller (IMSIC) defined by the RISC-V advanced interrupt architecture (AIA) specification.
Signed-off-by Anup Patel <[email protected]>--- .../interrupt-controller/riscv,imsic.yaml | 174 ++++++++++++++++++ 1 file changed, 174 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yamlDocumentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +44
-0@@ -0,0 +1,174 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/riscv,imsic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RISC-V Incoming MSI Controller (IMSIC) + +maintainers: + - Anup Patel <[email protected]> + +description: + The RISC-V advanced interrupt architecture (AIA) defines a per-CPU incoming + MSI controller (IMSIC) for handling MSIs in a RISC-V platform. The RISC-V + AIA specification can be found at https://github.com/riscv/riscv-aia. + + The IMSIC is a per-CPU (or per-HART) device with separate interrupt file + for each privilege level (machine or supervisor). The configuration of + a IMSIC interrupt file is done using AIA CSRs and it also has a 4KB MMIO + space to receive MSIs from devices. Each IMSIC interrupt file supports a + fixed number of interrupt identities (to distinguish MSIs from devices) + which is same for given privilege level across CPUs (or HARTs). + + The arrangement of IMSIC interrupt files in MMIO space of a RISC-V platform + follows a particular scheme defined by the RISC-V AIA specification. A IMSIC + group is a set of IMSIC interrupt files co-located in MMIO space and we can + have multiple IMSIC groups (i.e. clusters, sockets, chiplets, etc) in a + RISC-V platform. The MSI target address of a IMSIC interrupt file at given + privilege level (machine or supervisor) encodes group index, HART index, + and guest index (shown below). + + XLEN-1 >=24 12 0 + | | | | + ------------------------------------------------------------- + |xxxxxx|Group Index|xxxxxxxxxxx|HART Index|Guest Index| 0 | + ------------------------------------------------------------- + + The device tree of a RISC-V platform will have one IMSIC device tree node + for each privilege level (machine or supervisor) which collectively describe + IMSIC interrupt files at that privilege level across CPUs (or HARTs). + +allOf: + - $ref: /schemas/interrupt-controller.yaml# +
Quoted 8 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml line 49
Quoted 5 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +5
-0+properties: + compatible: + items: + - enum: + - vendor,chip-imsicsThere is no such vendor... As Conor pointed out, this does not look correct. Compatibles must be real and specific.
Previously, Rob had suggest to:
1) Mandate two compatible strings: one for implementation and and second for specification
2) Since this is new specification with QEMU being the only implementation, we add "vendor,chip-imsics" as dummy implementation specific string for DT schema checkers to pass the examples. Once we have an actual implementation, we will replace this dummy string.
Refer, https://www.spinics.net/lists/devicetree/msg442720.html
Quoted 8 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml line 54
Quoted 6 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +5
-0+ - const: riscv,imsics + + reg: + minItems: 1 + maxItems: 128Is there a DTS with 128 reg items?
Not at the moment since this is a new specification.
The value "128" is because maximum number of IMSIC groups on an system with both IMSIC and APLIC is 128 where each IMSIC group has a separate base address. This is not a hard limit so I am willing to drop it as well.
Quoted 13 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml line 63
Quoted 10 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +9
-0+ description: + Base address of each IMSIC group. + + interrupt-controller: true + + "#interrupt-cells": + const: 0 + + msi-controller: trueYou want then
msi-controller.yamlschema and you can drop properties described there.
Okay, I will include msi-controller.yaml in the next revision.
Quoted 11 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml line 67
Quoted 5 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +4
-0+ + interrupts-extended: + minItems: 1 + maxItems: 32768I just wonder if you are not putting some random stuff here... just like this "vendor" company.
32768 inputs it is quite a big chip. Are you sure you have so many pins or internal connections?
The interrupts-extended property describes the association of IMSIC interrupt files with the HARTs. If there are N HARTs then we will have N entries in the interrupts-extended (just like the existing PLIC DT bindings).
For example, if the first entry points to HART1 and the second entry points to HART0 then the first interrupt file is associated with HART1 and the second interrupt file is associated with HART0.
Currently, the "maxItems" limit reflects the max IMSICs which an APLIC domain can target on a system with both IMSIC and APLIC.
Actually, there is a typo here. The "maxItems" should be 16384 as-per the frozen AIA specification. I will update "maxItems" accordingly in next patch revision.
Quoted 26 lines
Quoted 26 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +25
-0+ description: + This property represents the set of CPUs (or HARTs) for which given + device tree node describes the IMSIC interrupt files. Each node pointed + to should be a riscv,cpu-intc node, which has a riscv node (i.e. RISC-V + HART) as parent. + + riscv,num-ids: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 63 + maximum: 2047 + description: + Specifies how many interrupt identities are supported by IMSIC interrupt + file. + + riscv,num-guest-ids: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 63 + maximum: 2047 + description: + Specifies how many interrupt identities are supported by IMSIC guest + interrupt file. When not specified the number of interrupt identities + supported by IMSIC guest file is assumed to be same as specified by + the riscv,num-ids property. + + riscv,slow-ipi:
Quoted 8 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml line 98
Quoted 6 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +6
-0+ type: boolean + description: + The presence of this property implies that software interrupts (i.e. + IPIs) using IMSIC software injected MSIs is slower compared to other + software interrupt mechanisms (such as SBI IPI) on the underlying + RISC-V platform.Is this a property of software or hardware?
This is a property of hardware (or implementation) because IPIs in IMSIC are software injected MSIs so if IMSIC is trap-n-emulated by a hypervisor then all writes to MSI register will trap to hypervisor in which case IPI injection via IMSIC is slow.
The presence of "riscv,slow-ipi" DT property provides a hint to driver that using IPIs through IMSIC is slow on this platform so if there are other IPI mechanisms (such as SBI IPI calls) then OS should prefer those mechanisms.
Quoted 16 lines
Quoted 16 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +15
-0+ + riscv,guest-index-bits: + minimum: 0 + maximum: 7 + description: + Specifies number of guest index bits in the MSI target address. When + not specified it is assumed to be 0. + + riscv,hart-index-bits: + minimum: 0 + maximum: 15 + description: + Specifies number of HART index bits in the MSI target address. When + not specified it is estimated based on the interrupts-extended property. +
Quoted 8 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml line 119
Quoted 6 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +6
-0+ riscv,group-index-bits: + minimum: 0 + maximum: 7 + description: + Specifies number of group index bits in the MSI target address. When + not specified it is assumed to be 0.Then default: 0.
Okay, I will update.
Quoted 11 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml line 126
Quoted 8 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +7
-0+ + riscv,group-index-shift: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 24 + maximum: 55 + description: + Specifies the least significant bit of the group index bits in thePlease drop everywhere "Specifies the" and instead just describe the hardware.
Okay, I will update.
Quoted 7 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml line 129
Quoted 4 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +3
-0+ MSI target address. When not specified it is assumed to be 24. + +additionalProperties: falseunevaluatedProperties: false and drop all properties already described by other schemas.
Okay, I will update.
Quoted 26 lines
Quoted 26 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +25
-0+ +required: + - compatible + - reg + - interrupt-controller + - msi-controller + - interrupts-extended + - riscv,num-ids + +examples: + - | + // Example 1 (Machine-level IMSIC files with just one group): + + imsic_mlevel: interrupt-controller@24000000 { + compatible = "vendor,chip-imsics", "riscv,imsics"; + interrupts-extended = <&cpu1_intc 11>, + <&cpu2_intc 11>, + <&cpu3_intc 11>, + <&cpu4_intc 11>; + reg = <0x28000000 0x4000>; + interrupt-controller; + #interrupt-cells = <0>; + msi-controller; + riscv,num-ids = <127>; + };
Quoted 8 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml line 160
Quoted 6 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +6
-0+ + - | + // Example 2 (Supervisor-level IMSIC files with two groups): + + imsic_slevel: interrupt-controller@28000000 { + compatible = "vendor,chip-imsics", "riscv,imsics";Please run
scripts/checkpatch.pland fix reported warnings.
I did not see any warnings with ./scripts/checkpatch.pl.
Is there any parameter of checkpatch.pl which I should try ?
Best Regards,
Anup
Re: [PATCH 4/9] dt-bindings: Add RISC-V incoming MSI controller bindings
Quoted 81 lines · Anup Patel
Quoted 61 lines · Krzysztof Kozlowski
Quoted 59 lines · Anup Patel
We add DT bindings document for RISC-V incoming MSI controller (IMSIC) defined by the RISC-V advanced interrupt architecture (AIA) specification.
Signed-off-by Anup Patel <[email protected]>--- .../interrupt-controller/riscv,imsic.yaml | 174 ++++++++++++++++++ 1 file changed, 174 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yamlDocumentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +44
-0@@ -0,0 +1,174 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/riscv,imsic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RISC-V Incoming MSI Controller (IMSIC) + +maintainers: + - Anup Patel <[email protected]> + +description: + The RISC-V advanced interrupt architecture (AIA) defines a per-CPU incoming + MSI controller (IMSIC) for handling MSIs in a RISC-V platform. The RISC-V + AIA specification can be found at https://github.com/riscv/riscv-aia. + + The IMSIC is a per-CPU (or per-HART) device with separate interrupt file + for each privilege level (machine or supervisor). The configuration of + a IMSIC interrupt file is done using AIA CSRs and it also has a 4KB MMIO + space to receive MSIs from devices. Each IMSIC interrupt file supports a + fixed number of interrupt identities (to distinguish MSIs from devices) + which is same for given privilege level across CPUs (or HARTs). + + The arrangement of IMSIC interrupt files in MMIO space of a RISC-V platform + follows a particular scheme defined by the RISC-V AIA specification. A IMSIC + group is a set of IMSIC interrupt files co-located in MMIO space and we can + have multiple IMSIC groups (i.e. clusters, sockets, chiplets, etc) in a + RISC-V platform. The MSI target address of a IMSIC interrupt file at given + privilege level (machine or supervisor) encodes group index, HART index, + and guest index (shown below). + + XLEN-1 >=24 12 0 + | | | | + ------------------------------------------------------------- + |xxxxxx|Group Index|xxxxxxxxxxx|HART Index|Guest Index| 0 | + ------------------------------------------------------------- + + The device tree of a RISC-V platform will have one IMSIC device tree node + for each privilege level (machine or supervisor) which collectively describe + IMSIC interrupt files at that privilege level across CPUs (or HARTs). + +allOf: + - $ref: /schemas/interrupt-controller.yaml# +Quoted 8 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml line 49
Quoted 5 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +5
-0+properties: + compatible: + items: + - enum: + - vendor,chip-imsicsThere is no such vendor... As Conor pointed out, this does not look correct. Compatibles must be real and specific.
Previously, Rob had suggest to:
1) Mandate two compatible strings: one for implementation and and second for specification
2) Since this is new specification with QEMU being the only implementation, we add "vendor,chip-imsics" as dummy implementation specific string for DT schema checkers to pass the examples. Once we have an actual implementation, we will replace this dummy string.
Quoted 1 line
Refer, https://www.spinics.net/lists/devicetree/msg442720.html
AFAIU, <vendor> and <chip> are wildcards and do not have the same meaning as vendor & chip. That's going off of the dt submitting patches doc though and I don't know if the tooling supports this.
Re: [PATCH 4/9] dt-bindings: Add RISC-V incoming MSI controller bindings
In reply to Anup PatelQuoted 81 lines · Anup Patel
Quoted 61 lines · Krzysztof Kozlowski
Quoted 59 lines · Anup Patel
We add DT bindings document for RISC-V incoming MSI controller (IMSIC) defined by the RISC-V advanced interrupt architecture (AIA) specification.
Signed-off-by Anup Patel <[email protected]>--- .../interrupt-controller/riscv,imsic.yaml | 174 ++++++++++++++++++ 1 file changed, 174 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yamlDocumentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +44
-0@@ -0,0 +1,174 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/riscv,imsic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RISC-V Incoming MSI Controller (IMSIC) + +maintainers: + - Anup Patel <[email protected]> + +description: + The RISC-V advanced interrupt architecture (AIA) defines a per-CPU incoming + MSI controller (IMSIC) for handling MSIs in a RISC-V platform. The RISC-V + AIA specification can be found at https://github.com/riscv/riscv-aia. + + The IMSIC is a per-CPU (or per-HART) device with separate interrupt file + for each privilege level (machine or supervisor). The configuration of + a IMSIC interrupt file is done using AIA CSRs and it also has a 4KB MMIO + space to receive MSIs from devices. Each IMSIC interrupt file supports a + fixed number of interrupt identities (to distinguish MSIs from devices) + which is same for given privilege level across CPUs (or HARTs). + + The arrangement of IMSIC interrupt files in MMIO space of a RISC-V platform + follows a particular scheme defined by the RISC-V AIA specification. A IMSIC + group is a set of IMSIC interrupt files co-located in MMIO space and we can + have multiple IMSIC groups (i.e. clusters, sockets, chiplets, etc) in a + RISC-V platform. The MSI target address of a IMSIC interrupt file at given + privilege level (machine or supervisor) encodes group index, HART index, + and guest index (shown below). + + XLEN-1 >=24 12 0 + | | | | + ------------------------------------------------------------- + |xxxxxx|Group Index|xxxxxxxxxxx|HART Index|Guest Index| 0 | + ------------------------------------------------------------- + + The device tree of a RISC-V platform will have one IMSIC device tree node + for each privilege level (machine or supervisor) which collectively describe + IMSIC interrupt files at that privilege level across CPUs (or HARTs). + +allOf: + - $ref: /schemas/interrupt-controller.yaml# +Quoted 8 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml line 49
Quoted 5 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +5
-0+properties: + compatible: + items: + - enum: + - vendor,chip-imsicsThere is no such vendor... As Conor pointed out, this does not look correct. Compatibles must be real and specific.
Previously, Rob had suggest to:
1) Mandate two compatible strings: one for implementation and and second for specification
2) Since this is new specification with QEMU being the only implementation, we add "vendor,chip-imsics" as dummy implementation specific string for DT schema checkers to pass the examples. Once we have an actual implementation, we will replace this dummy string.
Quoted 1 line
Refer, https://www.spinics.net/lists/devicetree/msg442720.html
And Rob did not propose vendor as vendor and chip-imsics as device. Read his message again.
Quoted 10 lines
Quoted 9 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml line 54
Quoted 7 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +5
-0+ - const: riscv,imsics + + reg: + minItems: 1 + maxItems: 128Is there a DTS with 128 reg items?
Quoted 7 lines
Not at the moment since this is a new specification.
The value "128" is because maximum number of IMSIC groups on an system with both IMSIC and APLIC is 128 where each IMSIC group has a separate base address. This is not a hard limit so I am willing to drop it as well.
Is "separate base address" really a separate different range or just spaced by few registers?
Quoted 84 lines
Quoted 14 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml line 63
Quoted 11 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +9
-0+ description: + Base address of each IMSIC group. + + interrupt-controller: true + + "#interrupt-cells": + const: 0 + + msi-controller: trueYou want then
msi-controller.yamlschema and you can drop properties described there.Okay, I will include
msi-controller.yamlin the next revision.Quoted 11 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml line 67
Quoted 5 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +4
-0+ + interrupts-extended: + minItems: 1 + maxItems: 32768I just wonder if you are not putting some random stuff here... just like this "vendor" company.
32768 inputs it is quite a big chip. Are you sure you have so many pins or internal connections?
The interrupts-extended property describes the association of IMSIC interrupt files with the HARTs. If there are N HARTs then we will have N entries in the interrupts-extended (just like the existing PLIC DT bindings).
For example, if the first entry points to HART1 and the second entry points to HART0 then the first interrupt file is associated with HART1 and the second interrupt file is associated with HART0.
Currently, the "maxItems" limit reflects the max IMSICs which an APLIC domain can target on a system with both IMSIC and APLIC.
Actually, there is a typo here. The "maxItems" should be 16384 as-per the frozen AIA specification. I will update "maxItems" accordingly in next patch revision.
Quoted 26 lines
Quoted 26 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +25
-0+ description: + This property represents the set of CPUs (or HARTs) for which given + device tree node describes the IMSIC interrupt files. Each node pointed + to should be a riscv,cpu-intc node, which has a riscv node (i.e. RISC-V + HART) as parent. + + riscv,num-ids: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 63 + maximum: 2047 + description: + Specifies how many interrupt identities are supported by IMSIC interrupt + file. + + riscv,num-guest-ids: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 63 + maximum: 2047 + description: + Specifies how many interrupt identities are supported by IMSIC guest + interrupt file. When not specified the number of interrupt identities + supported by IMSIC guest file is assumed to be same as specified by + the riscv,num-ids property. + + riscv,slow-ipi:Quoted 8 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml line 98
Quoted 6 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +6
-0+ type: boolean + description: + The presence of this property implies that software interrupts (i.e. + IPIs) using IMSIC software injected MSIs is slower compared to other + software interrupt mechanisms (such as SBI IPI) on the underlying + RISC-V platform.Is this a property of software or hardware?
This is a property of hardware (or implementation) because IPIs in IMSIC are software injected MSIs so if IMSIC is trap-n-emulated by a hypervisor then all writes to MSI register will trap to hypervisor in which case IPI injection via IMSIC is slow.
Quoted 4 lines
The presence of "riscv,slow-ipi" DT property provides a hint to driver that using IPIs through IMSIC is slow on this platform so if there are other IPI mechanisms (such as SBI IPI calls) then OS should prefer those mechanisms.
If this is specific to implementation, why it is not included already in the compatible?
The name is anyway too vague. What is "slow"? Describe real characteristics of hardware, e.g. trapped via hypervisor.
Quoted 87 lines
Quoted 17 lines
Quoted 17 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +15
-0+ + riscv,guest-index-bits: + minimum: 0 + maximum: 7 + description: + Specifies number of guest index bits in the MSI target address. When + not specified it is assumed to be 0. + + riscv,hart-index-bits: + minimum: 0 + maximum: 15 + description: + Specifies number of HART index bits in the MSI target address. When + not specified it is estimated based on the interrupts-extended property. +Quoted 8 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml line 119
Quoted 6 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +6
-0+ riscv,group-index-bits: + minimum: 0 + maximum: 7 + description: + Specifies number of group index bits in the MSI target address. When + not specified it is assumed to be 0.Then default: 0.
Okay, I will update.
Quoted 11 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml line 126
Quoted 8 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +7
-0+ + riscv,group-index-shift: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 24 + maximum: 55 + description: + Specifies the least significant bit of the group index bits in thePlease drop everywhere "Specifies the" and instead just describe the hardware.
Okay, I will update.
Quoted 7 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml line 129
Quoted 4 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +3
-0+ MSI target address. When not specified it is assumed to be 24. + +additionalProperties: falseunevaluatedProperties: false and drop all properties already described by other schemas.
Okay, I will update.
Quoted 26 lines
Quoted 26 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +25
-0+ +required: + - compatible + - reg + - interrupt-controller + - msi-controller + - interrupts-extended + - riscv,num-ids + +examples: + - | + // Example 1 (Machine-level IMSIC files with just one group): + + imsic_mlevel: interrupt-controller@24000000 { + compatible = "vendor,chip-imsics", "riscv,imsics"; + interrupts-extended = <&cpu1_intc 11>, + <&cpu2_intc 11>, + <&cpu3_intc 11>, + <&cpu4_intc 11>; + reg = <0x28000000 0x4000>; + interrupt-controller; + #interrupt-cells = <0>; + msi-controller; + riscv,num-ids = <127>; + };Quoted 8 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml line 160
Quoted 6 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +6
-0+ + - | + // Example 2 (Supervisor-level IMSIC files with two groups): + + imsic_slevel: interrupt-controller@28000000 { + compatible = "vendor,chip-imsics", "riscv,imsics";Please run
scripts/checkpatch.pland fix reported warnings.
Quoted 3 lines
I did not see any warnings with
./scripts/checkpatch.pl.Is there any parameter of checkpatch.pl which I should try ?
You should see here or with your DTS warnings about undocumented vendor prefix.
Best regards,
Krzysztof
Re: [PATCH 4/9] dt-bindings: Add RISC-V incoming MSI controller bindings
Quoted 83 lines · Krzysztof Kozlowski
Quoted 81 lines · Anup Patel
Quoted 61 lines · Krzysztof Kozlowski
Quoted 59 lines · Anup Patel
We add DT bindings document for RISC-V incoming MSI controller (IMSIC) defined by the RISC-V advanced interrupt architecture (AIA) specification.
Signed-off-by Anup Patel <[email protected]>--- .../interrupt-controller/riscv,imsic.yaml | 174 ++++++++++++++++++ 1 file changed, 174 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yamlDocumentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +44
-0@@ -0,0 +1,174 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/riscv,imsic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RISC-V Incoming MSI Controller (IMSIC) + +maintainers: + - Anup Patel <[email protected]> + +description: + The RISC-V advanced interrupt architecture (AIA) defines a per-CPU incoming + MSI controller (IMSIC) for handling MSIs in a RISC-V platform. The RISC-V + AIA specification can be found at https://github.com/riscv/riscv-aia. + + The IMSIC is a per-CPU (or per-HART) device with separate interrupt file + for each privilege level (machine or supervisor). The configuration of + a IMSIC interrupt file is done using AIA CSRs and it also has a 4KB MMIO + space to receive MSIs from devices. Each IMSIC interrupt file supports a + fixed number of interrupt identities (to distinguish MSIs from devices) + which is same for given privilege level across CPUs (or HARTs). + + The arrangement of IMSIC interrupt files in MMIO space of a RISC-V platform + follows a particular scheme defined by the RISC-V AIA specification. A IMSIC + group is a set of IMSIC interrupt files co-located in MMIO space and we can + have multiple IMSIC groups (i.e. clusters, sockets, chiplets, etc) in a + RISC-V platform. The MSI target address of a IMSIC interrupt file at given + privilege level (machine or supervisor) encodes group index, HART index, + and guest index (shown below). + + XLEN-1 >=24 12 0 + | | | | + ------------------------------------------------------------- + |xxxxxx|Group Index|xxxxxxxxxxx|HART Index|Guest Index| 0 | + ------------------------------------------------------------- + + The device tree of a RISC-V platform will have one IMSIC device tree node + for each privilege level (machine or supervisor) which collectively describe + IMSIC interrupt files at that privilege level across CPUs (or HARTs). + +allOf: + - $ref: /schemas/interrupt-controller.yaml# +Quoted 8 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml line 49
Quoted 5 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +5
-0+properties: + compatible: + items: + - enum: + - vendor,chip-imsicsThere is no such vendor... As Conor pointed out, this does not look correct. Compatibles must be real and specific.
Previously, Rob had suggest to:
1) Mandate two compatible strings: one for implementation and and second for specification
2) Since this is new specification with QEMU being the only implementation, we add "vendor,chip-imsics" as dummy implementation specific string for DT schema checkers to pass the examples. Once we have an actual implementation, we will replace this dummy string.
Quoted 4 lines
Quoted 1 line
Refer, https://www.spinics.net/lists/devicetree/msg442720.html
And Rob did not propose vendor as vendor and chip-imsics as device. Read his message again.
Okay
Quoted 13 lines
Quoted 13 lines
Quoted 10 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml line 54
Quoted 8 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +5
-0+ - const: riscv,imsics + + reg: + minItems: 1 + maxItems: 128Is there a DTS with 128 reg items?
Not at the moment since this is a new specification.
Quoted 8 lines
Quoted 5 lines
The value "128" is because maximum number of IMSIC groups on an system with both IMSIC and APLIC is 128 where each IMSIC group has a separate base address. This is not a hard limit so I am willing to drop it as well.
Is "separate base address" really a separate different range or just spaced by few registers?
Yes, "separate base address" of an IMSIC group
means a separate different range.
We can think of an IMSIC group as a CPU cluster or chiplet or die. The IMSIC files within a group are located next to each other whereas the groups can be far away from each other.
Quoted 90 lines
Quoted 85 lines
Quoted 15 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml line 63
Quoted 12 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +9
-0+ description: + Base address of each IMSIC group. + + interrupt-controller: true + + "#interrupt-cells": + const: 0 + + msi-controller: trueYou want then
msi-controller.yamlschema and you can drop properties described there.Okay, I will include
msi-controller.yamlin the next revision.Quoted 11 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml line 67
Quoted 5 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +4
-0+ + interrupts-extended: + minItems: 1 + maxItems: 32768I just wonder if you are not putting some random stuff here... just like this "vendor" company.
32768 inputs it is quite a big chip. Are you sure you have so many pins or internal connections?
The interrupts-extended property describes the association of IMSIC interrupt files with the HARTs. If there are N HARTs then we will have N entries in the interrupts-extended (just like the existing PLIC DT bindings).
For example, if the first entry points to HART1 and the second entry points to HART0 then the first interrupt file is associated with HART1 and the second interrupt file is associated with HART0.
Currently, the "maxItems" limit reflects the max IMSICs which an APLIC domain can target on a system with both IMSIC and APLIC.
Actually, there is a typo here. The "maxItems" should be 16384 as-per the frozen AIA specification. I will update "maxItems" accordingly in next patch revision.
Quoted 26 lines
Quoted 26 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +25
-0+ description: + This property represents the set of CPUs (or HARTs) for which given + device tree node describes the IMSIC interrupt files. Each node pointed + to should be a riscv,cpu-intc node, which has a riscv node (i.e. RISC-V + HART) as parent. + + riscv,num-ids: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 63 + maximum: 2047 + description: + Specifies how many interrupt identities are supported by IMSIC interrupt + file. + + riscv,num-guest-ids: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 63 + maximum: 2047 + description: + Specifies how many interrupt identities are supported by IMSIC guest + interrupt file. When not specified the number of interrupt identities + supported by IMSIC guest file is assumed to be same as specified by + the riscv,num-ids property. + + riscv,slow-ipi:Quoted 8 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml line 98
Quoted 6 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +6
-0+ type: boolean + description: + The presence of this property implies that software interrupts (i.e. + IPIs) using IMSIC software injected MSIs is slower compared to other + software interrupt mechanisms (such as SBI IPI) on the underlying + RISC-V platform.Is this a property of software or hardware?
This is a property of hardware (or implementation) because IPIs in IMSIC are software injected MSIs so if IMSIC is trap-n-emulated by a hypervisor then all writes to MSI register will trap to hypervisor in which case IPI injection via IMSIC is slow.
Quoted 4 lines
The presence of "riscv,slow-ipi" DT property provides a hint to driver that using IPIs through IMSIC is slow on this platform so if there are other IPI mechanisms (such as SBI IPI calls) then OS should prefer those mechanisms.
Quoted 5 lines
If this is specific to implementation, why it is not included already in the compatible?
The name is anyway too vague. What is "slow"? Describe real characteristics of hardware, e.g. trapped via hypervisor.
Okay, how about renaming it to "riscv,trap-n-emulated" ?
Alternately, we can add "riscv,soft-imsics" as an implementation specific compatible string which hypervisors can use to describe trap-n-emulated IMSICs. This "riscv,soft-imsics" can also replace "vendor,chip-imsics" dummy string ?
Quoted 87 lines
Quoted 87 lines
Quoted 17 lines
Quoted 17 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +15
-0+ + riscv,guest-index-bits: + minimum: 0 + maximum: 7 + description: + Specifies number of guest index bits in the MSI target address. When + not specified it is assumed to be 0. + + riscv,hart-index-bits: + minimum: 0 + maximum: 15 + description: + Specifies number of HART index bits in the MSI target address. When + not specified it is estimated based on the interrupts-extended property. +Quoted 8 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml line 119
Quoted 6 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +6
-0+ riscv,group-index-bits: + minimum: 0 + maximum: 7 + description: + Specifies number of group index bits in the MSI target address. When + not specified it is assumed to be 0.Then default: 0.
Okay, I will update.
Quoted 11 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml line 126
Quoted 8 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +7
-0+ + riscv,group-index-shift: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 24 + maximum: 55 + description: + Specifies the least significant bit of the group index bits in thePlease drop everywhere "Specifies the" and instead just describe the hardware.
Okay, I will update.
Quoted 7 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml line 129
Quoted 4 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +3
-0+ MSI target address. When not specified it is assumed to be 24. + +additionalProperties: falseunevaluatedProperties: false and drop all properties already described by other schemas.
Okay, I will update.
Quoted 34 lines
Quoted 22 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +21
-0+ +required: + - compatible + - reg + - interrupt-controller + - msi-controller + - interrupts-extended + - riscv,num-ids + +examples: + - | + // Example 1 (Machine-level IMSIC files with just one group): + + imsic_mlevel: interrupt-controller@24000000 { + compatible = "vendor,chip-imsics", "riscv,imsics"; + interrupts-extended = <&cpu1_intc 11>, + <&cpu2_intc 11>, + <&cpu3_intc 11>, + <&cpu4_intc 11>; + reg = <0x28000000 0x4000>; + interrupt-controller;Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml line 160
Quoted 10 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +10
-0+ #interrupt-cells = <0>; + msi-controller; + riscv,num-ids = <127>; + }; + + - | + // Example 2 (Supervisor-level IMSIC files with two groups): + + imsic_slevel: interrupt-controller@28000000 { + compatible = "vendor,chip-imsics", "riscv,imsics";Please run
scripts/checkpatch.pland fix reported warnings.
Quoted 6 lines
Quoted 3 lines
I did not see any warnings with
./scripts/checkpatch.pl.Is there any parameter of checkpatch.pl which I should try ?
You should see here or with your DTS warnings about undocumented vendor prefix.
Okay, I will check.
Quoted 4 lines
Best regards,
Krzysztof
Best Regards,
Anup
Re: [PATCH 4/9] dt-bindings: Add RISC-V incoming MSI controller bindings
Quoted 22 lines · Anup Patel
On Mon, Nov 14, 2022 at 5:52 PM Krzysztof Kozlowski
Quoted 20 lines
Quoted 19 lines
Quoted 9 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml line 98
Quoted 7 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +7
-0+ riscv,slow-ipi: + type: boolean + description: + The presence of this property implies that software interrupts (i.e. + IPIs) using IMSIC software injected MSIs is slower compared to other + software interrupt mechanisms (such as SBI IPI) on the underlying + RISC-V platform.Is this a property of software or hardware?
This is a property of hardware (or implementation) because IPIs in IMSIC are software injected MSIs so if IMSIC is trap-n-emulated by a hypervisor then all writes to MSI register will trap to hypervisor in which case IPI injection via IMSIC is slow.
The presence of "riscv,slow-ipi" DT property provides a hint to driver that using IPIs through IMSIC is slow on this platform so if there are other IPI mechanisms (such as SBI IPI calls) then OS should prefer those mechanisms.
Quoted 7 lines
Quoted 5 lines
If this is specific to implementation, why it is not included already in the compatible?
The name is anyway too vague. What is "slow"? Describe real characteristics of hardware, e.g. trapped via hypervisor.
Okay, how about renaming it to "riscv,trap-n-emulated" ?
Sounds ok.
Quoted 5 lines
Alternately, we can add "riscv,soft-imsics" as an implementation specific compatible string which hypervisors can use to describe trap-n-emulated IMSICs. This "riscv,soft-imsics" can also replace "vendor,chip-imsics" dummy string ?
soft-imsics would work only if it is a real device. My question was rather whether this is something configurable or fixed in given implementation.
Best regards,
Krzysztof
Rob Herring
maintainerRe: [PATCH 4/9] dt-bindings: Add RISC-V incoming MSI controller bindings
In reply to Anup PatelQuoted 72 lines · Anup Patel
Quoted 61 lines · Krzysztof Kozlowski
Quoted 59 lines · Anup Patel
We add DT bindings document for RISC-V incoming MSI controller (IMSIC) defined by the RISC-V advanced interrupt architecture (AIA) specification.
Signed-off-by Anup Patel <[email protected]>--- .../interrupt-controller/riscv,imsic.yaml | 174 ++++++++++++++++++ 1 file changed, 174 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yamlDocumentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +44
-0@@ -0,0 +1,174 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/riscv,imsic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RISC-V Incoming MSI Controller (IMSIC) + +maintainers: + - Anup Patel <[email protected]> + +description: + The RISC-V advanced interrupt architecture (AIA) defines a per-CPU incoming + MSI controller (IMSIC) for handling MSIs in a RISC-V platform. The RISC-V + AIA specification can be found at https://github.com/riscv/riscv-aia. + + The IMSIC is a per-CPU (or per-HART) device with separate interrupt file + for each privilege level (machine or supervisor). The configuration of + a IMSIC interrupt file is done using AIA CSRs and it also has a 4KB MMIO + space to receive MSIs from devices. Each IMSIC interrupt file supports a + fixed number of interrupt identities (to distinguish MSIs from devices) + which is same for given privilege level across CPUs (or HARTs). + + The arrangement of IMSIC interrupt files in MMIO space of a RISC-V platform + follows a particular scheme defined by the RISC-V AIA specification. A IMSIC + group is a set of IMSIC interrupt files co-located in MMIO space and we can + have multiple IMSIC groups (i.e. clusters, sockets, chiplets, etc) in a + RISC-V platform. The MSI target address of a IMSIC interrupt file at given + privilege level (machine or supervisor) encodes group index, HART index, + and guest index (shown below). + + XLEN-1 >=24 12 0 + | | | | + ------------------------------------------------------------- + |xxxxxx|Group Index|xxxxxxxxxxx|HART Index|Guest Index| 0 | + ------------------------------------------------------------- + + The device tree of a RISC-V platform will have one IMSIC device tree node + for each privilege level (machine or supervisor) which collectively describe + IMSIC interrupt files at that privilege level across CPUs (or HARTs). + +allOf: + - $ref: /schemas/interrupt-controller.yaml# +Quoted 8 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml line 49
Quoted 5 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +5
-0+properties: + compatible: + items: + - enum: + - vendor,chip-imsicsThere is no such vendor... As Conor pointed out, this does not look correct. Compatibles must be real and specific.
Quoted 8 lines
Previously, Rob had suggest to:
1) Mandate two compatible strings: one for implementation and and second for specification
2) Since this is new specification with QEMU being the only implementation, we add "vendor,chip-imsics" as dummy implementation specific string for DT schema checkers to pass the examples. Once we have an actual implementation, we will replace this dummy string.
What will QEMU's DT use? That's an implementation we can and do run validation on. Your choices are define a QEMU specific compatible string or allow the fallback alone. I'm fine either way. With the latter, someone has to review that the fallback is not used alone in .dts files while doing the former allows the tools to check for you. It also encourages making every new difference a property rather than implied by compatible, but those should be caught in review.
If you go with the fallback only, just make it clear that it's for QEMU or s/w models only.
Rob
Anup Patel
maintainerRe: [PATCH 4/9] dt-bindings: Add RISC-V incoming MSI controller bindings
Quoted 91 lines · Rob Herring
Quoted 72 lines · Anup Patel
Quoted 61 lines · Krzysztof Kozlowski
Quoted 59 lines · Anup Patel
We add DT bindings document for RISC-V incoming MSI controller (IMSIC) defined by the RISC-V advanced interrupt architecture (AIA) specification.
Signed-off-by Anup Patel <[email protected]>--- .../interrupt-controller/riscv,imsic.yaml | 174 ++++++++++++++++++ 1 file changed, 174 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yamlDocumentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +44
-0@@ -0,0 +1,174 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/riscv,imsic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RISC-V Incoming MSI Controller (IMSIC) + +maintainers: + - Anup Patel <[email protected]> + +description: + The RISC-V advanced interrupt architecture (AIA) defines a per-CPU incoming + MSI controller (IMSIC) for handling MSIs in a RISC-V platform. The RISC-V + AIA specification can be found at https://github.com/riscv/riscv-aia. + + The IMSIC is a per-CPU (or per-HART) device with separate interrupt file + for each privilege level (machine or supervisor). The configuration of + a IMSIC interrupt file is done using AIA CSRs and it also has a 4KB MMIO + space to receive MSIs from devices. Each IMSIC interrupt file supports a + fixed number of interrupt identities (to distinguish MSIs from devices) + which is same for given privilege level across CPUs (or HARTs). + + The arrangement of IMSIC interrupt files in MMIO space of a RISC-V platform + follows a particular scheme defined by the RISC-V AIA specification. A IMSIC + group is a set of IMSIC interrupt files co-located in MMIO space and we can + have multiple IMSIC groups (i.e. clusters, sockets, chiplets, etc) in a + RISC-V platform. The MSI target address of a IMSIC interrupt file at given + privilege level (machine or supervisor) encodes group index, HART index, + and guest index (shown below). + + XLEN-1 >=24 12 0 + | | | | + ------------------------------------------------------------- + |xxxxxx|Group Index|xxxxxxxxxxx|HART Index|Guest Index| 0 | + ------------------------------------------------------------- + + The device tree of a RISC-V platform will have one IMSIC device tree node + for each privilege level (machine or supervisor) which collectively describe + IMSIC interrupt files at that privilege level across CPUs (or HARTs). + +allOf: + - $ref: /schemas/interrupt-controller.yaml# +Quoted 8 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml line 49
Quoted 5 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml new file +5
-0+properties: + compatible: + items: + - enum: + - vendor,chip-imsicsThere is no such vendor... As Conor pointed out, this does not look correct. Compatibles must be real and specific.
Quoted 8 lines
Previously, Rob had suggest to:
1) Mandate two compatible strings: one for implementation and and second for specification
2) Since this is new specification with QEMU being the only implementation, we add "vendor,chip-imsics" as dummy implementation specific string for DT schema checkers to pass the examples. Once we have an actual implementation, we will replace this dummy string.What will QEMU's DT use? That's an implementation we can and do run validation on. Your choices are define a QEMU specific compatible string or allow the fallback alone. I'm fine either way. With the latter, someone has to review that the fallback is not used alone in .dts files while doing the former allows the tools to check for you. It also encourages making every new difference a property rather than implied by compatible, but those should be caught in review.
Quoted 2 lines
If you go with the fallback only, just make it clear that it's for QEMU or s/w models only.
Sure, I will add "riscv,qemu-imsics" as QEMU specific compatible string.
Regards,
Anup
PATCH 5/9 irqchip: Add RISC-V incoming MSI controller driver
In reply to Anup PatelThe RISC-V advanced interrupt architecture (AIA) specification defines a new MSI controller for managing MSIs on a RISC-V platform. This new MSI controller is referred to as incoming message signaled interrupt controller (IMSIC) which manages MSI on per-HART (or per-CPU) basis. (For more details refer https://github.com/riscv/riscv-aia)
This patch adds an irqchip driver for RISC-V IMSIC found on RISC-V platforms.
--- drivers/irqchip/Kconfig | 20 +- drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-riscv-imsic.c | 1207 +++++++++++++++++++++++++++ include/linux/irqchip/riscv-imsic.h | 92 ++ 4 files changed, 1319 insertions(+), 1 deletion(-) create mode 100644 drivers/irqchip/irq-riscv-imsic.c create mode 100644 include/linux/irqchip/riscv-imsic.h
drivers/irqchip/Kconfig +19 -1
@@ -29,7 +29,6 @@ config ARM_GIC_V2M config GIC_NON_BANKED bool - config ARM_GIC_V3 bool select IRQ_DOMAIN_HIERARCHY
@@ -564,6 +563,25 @@ config SIFIVE_PLIC If you don't know what to do here, say Y. +config RISCV_IMSIC + bool "RISC-V Incoming MSI Controller" + depends on RISCV + select IRQ_DOMAIN_HIERARCHY + select GENERIC_MSI_IRQ_DOMAIN + help + This enables support for the IMSIC chip found in RISC-V systems. + The IMSIC controls message signaled interrupts and forwards them + to each core as wired local interrupt. + + If you don't know what to do here, say Y. + +config RISCV_IMSIC_PCI + bool + depends on RISCV_IMSIC + depends on PCI + depends on PCI_MSI + default RISCV_IMSIC + config EXYNOS_IRQ_COMBINER bool "Samsung Exynos IRQ combiner support" if COMPILE_TEST depends on (ARCH_EXYNOS && ARM) || COMPILE_TEST
drivers/irqchip/Makefile +1 -0
@@ -96,6 +96,7 @@ obj-$(CONFIG_QCOM_MPM) += irq-qcom-mpm.o obj-$(CONFIG_CSKY_MPINTC) += irq-csky-mpintc.o obj-$(CONFIG_CSKY_APB_INTC) += irq-csky-apb-intc.o obj-$(CONFIG_RISCV_INTC) += irq-riscv-intc.o +obj-$(CONFIG_RISCV_IMSIC) += irq-riscv-imsic.o obj-$(CONFIG_SIFIVE_PLIC) += irq-sifive-plic.o obj-$(CONFIG_IMX_IRQSTEER) += irq-imx-irqsteer.o obj-$(CONFIG_IMX_INTMUX) += irq-imx-intmux.o
drivers/irqchip/irq-riscv-imsic.c new file +1207 -0
1,207 lines not on this page · raw message
include/linux/irqchip/riscv-imsic.h new file +92 -0
92 lines not on this page · raw message
Signature · 7 lines
2.34.1 _______________________________________________ linux-riscv mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-riscv
Re: [PATCH 5/9] irqchip: Add RISC-V incoming MSI controller driver
Quoted 271 lines · Anup Patel
The RISC-V advanced interrupt architecture (AIA) specification defines a new MSI controller for managing MSIs on a RISC-V platform. This new MSI controller is referred to as incoming message signaled interrupt controller (IMSIC) which manages MSI on per-HART (or per-CPU) basis. (For more details refer https://github.com/riscv/riscv-aia)
This patch adds an irqchip driver for RISC-V IMSIC found on RISC-V platforms.
Signed-off-by Anup Patel <[email protected]>--- drivers/irqchip/Kconfig | 20 +- drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-riscv-imsic.c | 1207 +++++++++++++++++++++++++++ include/linux/irqchip/riscv-imsic.h | 92 ++ 4 files changed, 1319 insertions(+), 1 deletion(-) create mode 100644 drivers/irqchip/irq-riscv-imsic.c create mode 100644 include/linux/irqchip/riscv-imsic.hdrivers/irqchip/Kconfig +19
-1@@ -29,7 +29,6 @@ config ARM_GIC_V2M config GIC_NON_BANKED bool - config ARM_GIC_V3 bool select IRQ_DOMAIN_HIERARCHY@@ -564,6 +563,25 @@ config SIFIVE_PLIC If you don't know what to do here, say Y. +config RISCV_IMSIC + bool "RISC-V Incoming MSI Controller" + depends on RISCV + select IRQ_DOMAIN_HIERARCHY + select GENERIC_MSI_IRQ_DOMAIN + help + This enables support for the IMSIC chip found in RISC-V systems. + The IMSIC controls message signaled interrupts and forwards them + to each core as wired local interrupt. + + If you don't know what to do here, say Y. + +config RISCV_IMSIC_PCI + bool + depends on RISCV_IMSIC + depends on PCI + depends on PCI_MSI + default RISCV_IMSIC + config EXYNOS_IRQ_COMBINER bool "Samsung Exynos IRQ combiner support" if COMPILE_TEST depends on (ARCH_EXYNOS && ARM) || COMPILE_TESTdrivers/irqchip/Makefile +1
-0@@ -96,6 +96,7 @@ obj-$(CONFIG_QCOM_MPM) += irq-qcom-mpm.o obj-$(CONFIG_CSKY_MPINTC) += irq-csky-mpintc.o obj-$(CONFIG_CSKY_APB_INTC) += irq-csky-apb-intc.o obj-$(CONFIG_RISCV_INTC) += irq-riscv-intc.o +obj-$(CONFIG_RISCV_IMSIC) += irq-riscv-imsic.o obj-$(CONFIG_SIFIVE_PLIC) += irq-sifive-plic.o obj-$(CONFIG_IMX_IRQSTEER) += irq-imx-irqsteer.o obj-$(CONFIG_IMX_INTMUX) += irq-imx-intmux.odrivers/irqchip/irq-riscv-imsic.c new file +195
-0@@ -0,0 +1,1207 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Copyright (C) 2021 Western Digital Corporation or its affiliates. +* Copyright (C) 2022 Ventana Micro Systems Inc. +*/ + +#define pr_fmt (fmt) "riscv-imsic: " fmt +#include <linux/bitmap.h> +#include <linux/cpu.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/iommu.h> +#include <linux/irq.h> +#include <linux/irqchip.h> +#include <linux/irqchip/chained_irq.h> +#include <linux/irqchip/riscv-imsic.h> +#include <linux/irqdomain.h> +#include <linux/module.h> +#include <linux/msi.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/pci.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> +#include <linux/smp.h> +#include <asm/hwcap.h> + +#define IMSIC_DISABLE_EIDELIVERY 0 +#define IMSIC_ENABLE_EIDELIVERY 1 +#define IMSIC_DISABLE_EITHRESHOLD 1 +#define IMSIC_ENABLE_EITHRESHOLD 0 + +#define imsic_csr_write (__c, __v) \ +do { \ + csr_write(CSR_ISELECT, __c); \ + csr_write(CSR_IREG, __v); \ +} while (0) + +#define imsic_csr_read (__c) \ +({ \ + unsigned long __v; \ + csr_write(CSR_ISELECT, __c); \ + __v = csr_read(CSR_IREG); \ + __v; \ +}) + +#define imsic_csr_set (__c, __v) \ +do { \ + csr_write(CSR_ISELECT, __c); \ + csr_set(CSR_IREG, __v); \ +} while (0) + +#define imsic_csr_clear (__c, __v) \ +do { \ + csr_write(CSR_ISELECT, __c); \ + csr_clear(CSR_IREG, __v); \ +} while (0) + +struct imsic_mmio { +phys_addr_t pa; +void __iomem *va; +unsigned long size; +}; + +struct imsic_priv { +/* Global configuration common for all HARTs */ +struct imsic_global_config global; + +/* MMIO regions */ +u32 num_mmios; +struct imsic_mmio *mmios; + +/* Global state of interrupt identities */ +raw_spinlock_t ids_lock; +unsigned long *ids_used_bimap; +unsigned long *ids_enabled_bimap; +unsigned int *ids_target_cpu; + +/* Mask for connected CPUs */ +struct cpumask lmask; + +/* IPI interrupt identity */ +bool slow_ipi; +u32 ipi_id; +u32 ipi_lsync_id; + +/* IRQ domains */ +struct irq_domain *base_domain; +struct irq_domain *pci_domain; +struct irq_domain *plat_domain; +}; + +struct imsic_handler { +/* Local configuration for given HART */ +struct imsic_local_config local; + +/* Pointer to private context */ +struct imsic_priv *priv; +}; + +static bool imsic_init_done; + +static int imsic_parent_irq; +static DEFINE_PER_CPU(struct imsic_handler, imsic_handlers); + +const struct imsic_global_config *imsic_get_global_config (void ) +{ +struct imsic_handler *handler =this_cpu_ptr (&imsic_handlers); + +if (!handler || !handler->priv) +return NULL ; + +return &handler->priv->global; +} +EXPORT_SYMBOL_GPL (imsic_get_global_config); + +const struct imsic_local_config *imsic_get_local_config (unsigned int cpu) +{ +struct imsic_handler *handler =per_cpu_ptr (&imsic_handlers, cpu); + +if (!handler || !handler->priv) +return NULL ; + +return &handler->local; +} +EXPORT_SYMBOL_GPL (imsic_get_local_config); + +static int imsic_cpu_page_phys (unsigned int cpu, +unsigned int guest_index, +phys_addr_t *out_msi_pa) +{ +struct imsic_handler *handler =per_cpu_ptr (&imsic_handlers, cpu); +struct imsic_global_config *global; +struct imsic_local_config *local; + +if (!handler || !handler->priv) +return -ENODEV ; + local = &handler->local; + global = &handler->priv->global; + +if (BIT (global->guest_index_bits) <= guest_index) +return -EINVAL ; + +if (out_msi_pa) + *out_msi_pa = local->msi_pa + + (guest_index *IMSIC_MMIO_PAGE_SZ ); + +return 0 ; +} + +static int imsic_get_cpu (struct imsic_priv *priv, +const struct cpumask *mask_val,bool force, +unsigned int *out_target_cpu) +{ +struct cpumask amask; +unsigned int cpu; + +cpumask_and (&amask, &priv->lmask, mask_val); + +if (force) + cpu =cpumask_first (&amask); +else + cpu =cpumask_any_and (&amask, cpu_online_mask); + +if (cpu >= nr_cpu_ids) +return -EINVAL ; + +if (out_target_cpu) + *out_target_cpu = cpu; + +return 0 ; +} + +static int imsic_get_cpu_msi_msg (unsigned int cpu,unsigned int id, +struct msi_msg *msg) +{ +phys_addr_t msi_addr; +int err; + + err =imsic_cpu_page_phys (cpu,0 , &msi_addr); +if (err) +return err; + + msg->address_hi =upper_32_bits (msi_addr); + msg->address_lo =lower_32_bits (msi_addr); + msg->data = id; + +return err; +} + +static void imsic_id_set_target (struct imsic_priv *priv, +unsigned int id,unsigned int target_cpu) +{ +raw_spin_lock (&priv->ids_lock);
drivers/irqchip/irq-riscv-imsic.c line 205
Quoted 10 lines
drivers/irqchip/irq-riscv-imsic.c new file +10
-0+ priv->ids_target_cpu[id] = target_cpu; +raw_spin_unlock (&priv->ids_lock); +} + +static unsigned int imsic_id_get_target (struct imsic_priv *priv, +unsigned int id) +{ +unsigned int ret; + +raw_spin_lock (&priv->ids_lock);
This needs to be a raw_spin_lock_irqsave() since hardirqs are enabled here and we also take priv->ids_lock in hardirq context (via imsic_ids_local_sync()). Booting with lockdep enabled produces this splat:
[ 1.830055] ================================
[ 1.830227] WARNING: inconsistent lock state
[ 1.830425] 6.1.0-rc4-00026-g78e09ffc5534 #42 Not tainted
[ 1.830655] --------------------------------
[ 1.830784] inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage.
[ 1.830972] swapper/0/1 [HC1[1]:SC0[0]:HE0:SE1] takes:
[ 1.831162] ff6000000229d048 (&priv->ids_lock){?.+.}-{2:2}, at:
imsic_ids_local_sync+0x1e/0x98
[ 1.831951] {HARDIRQ-ON-W} state was registered at:
[ 1.832132] __lock_acquire+0x93c/0x1e0c
[ 1.832305] lock_acquire+0xfa/0x2da
[ 1.832412] _raw_spin_lock+0x2c/0x40
[ 1.832531] imsic_ids_local_sync+0x1e/0x98
[ 1.832674] imsic_starting_cpu+0x72/0xac
[ 1.832852] cpuhp_invoke_callback+0x18c/0x93c
[ 1.833033] cpuhp_thread_fun+0x156/0x1b0
[ 1.833158] smpboot_thread_fn+0xea/0x1c8
[ 1.833293] kthread+0xc8/0xde
[ 1.833391] ret_from_exception+0x0/0x10
[ 1.833530] irq event stamp: 33336
[ 1.833647] hardirqs last enabled at (33335): [<ffffffff808f2fcc>]
_raw_spin_unlock_irqrestore+0x4c/0x4e
[ 1.833925] hardirqs last disabled at (33336): [<ffffffff800082f4>]
__trace_hardirqs_off+0xc/0x14
[ 1.834179] softirqs last enabled at (33056): [<ffffffff808f3f3e>]
__do_softirq+0x3de/0x51e
[ 1.834450] softirqs last disabled at (33051): [<ffffffff8001788a>]
irq_exit+0xd6/0x104
[ 1.834705]
[ 1.834705] other info that might help us debug this:
[ 1.834925] Possible unsafe locking scenario:
[ 1.834925]
[ 1.835093] CPU0
[ 1.835176] ----
[ 1.835253] lock(&priv->ids_lock);
[ 1.835381] <Interrupt>
[ 1.835462] lock(&priv->ids_lock);...
Applies here and elsewhere where priv->ids_lock is taken in a possibly hardirqs-enabled context.
-Andrew
Quoted 1,103 lines
drivers/irqchip/irq-riscv-imsic.c new file +1002
-0+ ret = priv->ids_target_cpu[id]; +raw_spin_unlock (&priv->ids_lock); + +return ret; +} + +static void __imsic_eix_update (unsigned long base_id, +unsigned long num_id,bool pend,bool val) +{ +unsigned long i, isel, ireg, flags; +unsigned long id = base_id, last_id = base_id + num_id; + +while (id < last_id) { + isel = id /BITS_PER_LONG ; + isel *=BITS_PER_LONG / IMSIC_EIPx_BITS; + isel += (pend) ?IMSIC_EIP0 :IMSIC_EIE0 ; + + ireg =0 ; +for (i = id & (__riscv_xlen -1 ); + (id < last_id) && (i < __riscv_xlen); i++) { + ireg |=BIT (i); + id++; + } + +/* +* The IMSIC EIEx and EIPx registers are indirectly +* accessed via using ISELECT and IREG CSRs so we +* save/restore local IRQ to ensure that we don't +* get preempted while accessing IMSIC registers. +*/ +local_irq_save (flags); +if (val) +imsic_csr_set (isel, ireg); +else +imsic_csr_clear (isel, ireg); +local_irq_restore (flags); + } +} + +#define __imsic_id_enable (__id) \ + __imsic_eix_update((__id), 1, false, true) +#define __imsic_id_disable (__id) \ + __imsic_eix_update((__id), 1, false, false) + +#ifdef CONFIG_SMP +static void __imsic_id_smp_sync (struct imsic_priv *priv) +{ +struct imsic_handler *handler; +struct cpumask amask; +int cpu; + +cpumask_and (&amask, &priv->lmask, cpu_online_mask); +for_each_cpu (cpu, &amask) { +if (cpu ==smp_processor_id ()) +continue ; + + handler =per_cpu_ptr (&imsic_handlers, cpu); +if (!handler || !handler->priv || !handler->local.msi_va) { +pr_warn ("CPU%d: handler not initialized\n" , cpu); +continue ; + } + +writel (handler->priv->ipi_lsync_id, handler->local.msi_va); + } +} +#else +#define __imsic_id_smp_sync (__priv) +#endif + +static void imsic_id_enable (struct imsic_priv *priv,unsigned int id) +{ +raw_spin_lock (&priv->ids_lock); +bitmap_set (priv->ids_enabled_bimap, id,1 ); +__imsic_id_enable (id); +raw_spin_unlock (&priv->ids_lock); + +__imsic_id_smp_sync (priv); +} + +static void imsic_id_disable (struct imsic_priv *priv,unsigned int id) +{ +raw_spin_lock (&priv->ids_lock); +bitmap_clear (priv->ids_enabled_bimap, id,1 ); +__imsic_id_disable (id); +raw_spin_unlock (&priv->ids_lock); + +__imsic_id_smp_sync (priv); +} + +static void imsic_ids_local_sync (struct imsic_priv *priv) +{ +int i; + +raw_spin_lock (&priv->ids_lock); +for (i =1 ; i <= priv->global.nr_ids; i++) { +if (priv->ipi_id == i || priv->ipi_lsync_id == i) +continue ; + +if (test_bit (i, priv->ids_enabled_bimap)) +__imsic_id_enable (i); +else +__imsic_id_disable (i); + } +raw_spin_unlock (&priv->ids_lock); +} + +static void imsic_ids_local_delivery (struct imsic_priv *priv,bool enable) +{ +if (enable) { +imsic_csr_write (IMSIC_EITHRESHOLD ,IMSIC_ENABLE_EITHRESHOLD ); +imsic_csr_write (IMSIC_EIDELIVERY ,IMSIC_ENABLE_EIDELIVERY ); + }else { +imsic_csr_write (IMSIC_EIDELIVERY ,IMSIC_DISABLE_EIDELIVERY ); +imsic_csr_write (IMSIC_EITHRESHOLD ,IMSIC_DISABLE_EITHRESHOLD ); + } +} + +static int imsic_ids_alloc (struct imsic_priv *priv, +unsigned int max_id,unsigned int order) +{ +int ret; + +if ((priv->global.nr_ids < max_id) || + (max_id <BIT (order))) +return -EINVAL ; + +raw_spin_lock (&priv->ids_lock); + ret =bitmap_find_free_region (priv->ids_used_bimap, + max_id +1 , order); +raw_spin_unlock (&priv->ids_lock); + +return ret; +} + +static void imsic_ids_free (struct imsic_priv *priv,unsigned int base_id, +unsigned int order) +{ +raw_spin_lock (&priv->ids_lock); +bitmap_release_region (priv->ids_used_bimap, base_id, order); +raw_spin_unlock (&priv->ids_lock); +} + +static int __init imsic_ids_init (struct imsic_priv *priv) +{ +int i; +struct imsic_global_config *global = &priv->global; + +raw_spin_lock_init (&priv->ids_lock); + +/* Allocate used bitmap */ + priv->ids_used_bimap =kcalloc (BITS_TO_LONGS (global->nr_ids +1 ), +sizeof (unsigned long ),GFP_KERNEL ); +if (!priv->ids_used_bimap) +return -ENOMEM ; + +/* Allocate enabled bitmap */ + priv->ids_enabled_bimap =kcalloc (BITS_TO_LONGS (global->nr_ids +1 ), +sizeof (unsigned long ),GFP_KERNEL ); +if (!priv->ids_enabled_bimap) { +kfree (priv->ids_used_bimap); +return -ENOMEM ; + } + +/* Allocate target CPU array */ + priv->ids_target_cpu =kcalloc (global->nr_ids +1 , +sizeof (unsigned int ),GFP_KERNEL ); +if (!priv->ids_target_cpu) { +kfree (priv->ids_enabled_bimap); +kfree (priv->ids_used_bimap); +return -ENOMEM ; + } +for (i =0 ; i <= global->nr_ids; i++) + priv->ids_target_cpu[i] =UINT_MAX ; + +/* Reserve ID#0 because it is special and never implemented */ +bitmap_set (priv->ids_used_bimap,0 ,1 ); + +return 0 ; +} + +static void __init imsic_ids_cleanup (struct imsic_priv *priv) +{ +kfree (priv->ids_target_cpu); +kfree (priv->ids_enabled_bimap); +kfree (priv->ids_used_bimap); +} + +#ifdef CONFIG_SMP +static void imsic_ipi_send_mask (unsigned int parent_virq,void *data, +const struct cpumask *mask) +{ +int cpu; +struct imsic_handler *handler; + +for_each_cpu (cpu, mask) { + handler =per_cpu_ptr (&imsic_handlers, cpu); +if (!handler || !handler->priv || !handler->local.msi_va) { +pr_warn ("CPU%d: handler not initialized\n" , cpu); +continue ; + } + +writel (handler->priv->ipi_id, handler->local.msi_va); + } +} + +static struct ipi_mux_ops imsic_ipi_ops = { + .ipi_mux_send = imsic_ipi_send_mask, +}; + +static void imsic_ipi_enable (struct imsic_priv *priv) +{ +__imsic_id_enable (priv->ipi_id); +__imsic_id_enable (priv->ipi_lsync_id); +} + +static void imsic_ipi_disable (struct imsic_priv *priv) +{ +__imsic_id_disable (priv->ipi_lsync_id); +__imsic_id_disable (priv->ipi_id); +} + +static int __init imsic_ipi_domain_init (struct imsic_priv *priv) +{ +int virq; + +/* Skip IPI setup if IPIs are slow */ +if (priv->slow_ipi) + goto skip_ipi; + +/* Allocate interrupt identity for IPIs */ + virq =imsic_ids_alloc (priv, priv->global.nr_ids,get_count_order (1 )); +if (virq <0 ) +return virq; + priv->ipi_id = virq; + +/* Create IMSIC IPI multiplexing */ + virq =ipi_mux_create (0 ,BITS_PER_BYTE , &imsic_ipi_ops,NULL ); +if (virq <=0 ) { +imsic_ids_free (priv, priv->ipi_id,get_count_order (1 )); +return (virq <0 ) ? virq : -ENOMEM ; + } + +/* Set vIRQ range */ +riscv_ipi_set_virq_range (virq,BITS_PER_BYTE , true); + +skip_ipi: +/* Allocate interrupt identity for local enable/disable sync */ + virq =imsic_ids_alloc (priv, priv->global.nr_ids,get_count_order (1 )); +if (virq <0 ) { +imsic_ids_free (priv, priv->ipi_id,get_count_order (1 )); +return virq; + } + priv->ipi_lsync_id = virq; + +return 0 ; +} + +static void __init imsic_ipi_domain_cleanup (struct imsic_priv *priv) +{ +imsic_ids_free (priv, priv->ipi_lsync_id,get_count_order (1 )); +if (priv->ipi_id) +imsic_ids_free (priv, priv->ipi_id,get_count_order (1 )); +} +#else +static void imsic_ipi_enable (struct imsic_priv *priv) +{ +} + +static void imsic_ipi_disable (struct imsic_priv *priv) +{ +} + +static int __init imsic_ipi_domain_init (struct imsic_priv *priv) +{ +/* Clear the IPI ids because we are not using IPIs */ + priv->ipi_id =0 ; + priv->ipi_lsync_id =0 ; +return 0 ; +} + +static void __init imsic_ipi_domain_cleanup (struct imsic_priv *priv) +{ +} +#endif + +static void imsic_irq_mask (struct irq_data *d) +{ +imsic_id_disable (irq_data_get_irq_chip_data (d), d->hwirq); +} + +static void imsic_irq_unmask (struct irq_data *d) +{ +imsic_id_enable (irq_data_get_irq_chip_data (d), d->hwirq); +} + +static void imsic_irq_compose_msi_msg (struct irq_data *d, +struct msi_msg *msg) +{ +struct imsic_priv *priv =irq_data_get_irq_chip_data (d); +unsigned int cpu; +int err; + + cpu =imsic_id_get_target (priv, d->hwirq); +WARN_ON (cpu ==UINT_MAX ); + + err =imsic_get_cpu_msi_msg (cpu, d->hwirq, msg); +WARN_ON (err); + +iommu_dma_compose_msi_msg (irq_data_get_msi_desc (d), msg); +} + +#ifdef CONFIG_SMP +static int imsic_irq_set_affinity (struct irq_data *d, +const struct cpumask *mask_val, +bool force) +{ +struct imsic_priv *priv =irq_data_get_irq_chip_data (d); +unsigned int target_cpu; +int rc; + + rc =imsic_get_cpu (priv, mask_val, force, &target_cpu); +if (rc) +return rc; + +imsic_id_set_target (priv, d->hwirq, target_cpu); +irq_data_update_effective_affinity (d,cpumask_of (target_cpu)); + +return IRQ_SET_MASK_OK ; +} +#endif + +static struct irq_chip imsic_irq_base_chip = { + .name ="RISC-V IMSIC-BASE" , + .irq_mask = imsic_irq_mask, + .irq_unmask = imsic_irq_unmask, +#ifdef CONFIG_SMP + .irq_set_affinity = imsic_irq_set_affinity, +#endif + .irq_compose_msi_msg = imsic_irq_compose_msi_msg, + .flags =IRQCHIP_SKIP_SET_WAKE | +IRQCHIP_MASK_ON_SUSPEND , +}; + +static int imsic_irq_domain_alloc (struct irq_domain *domain, +unsigned int virq, +unsigned int nr_irqs, +void *args) +{ +struct imsic_priv *priv = domain->host_data; +msi_alloc_info_t *info = args; +phys_addr_t msi_addr; +int i, hwirq, err =0 ; +unsigned int cpu; + + err =imsic_get_cpu (priv, &priv->lmask, false, &cpu); +if (err) +return err; + + err =imsic_cpu_page_phys (cpu,0 , &msi_addr); +if (err) +return err; + + hwirq =imsic_ids_alloc (priv, priv->global.nr_ids, +get_count_order (nr_irqs)); +if (hwirq <0 ) +return hwirq; + + err =iommu_dma_prepare_msi (info->desc, msi_addr); +if (err) + goto fail; + +for (i =0 ; i < nr_irqs; i++) { +imsic_id_set_target (priv, hwirq + i, cpu); +irq_domain_set_info (domain, virq + i, hwirq + i, + &imsic_irq_base_chip, priv, + handle_simple_irq,NULL ,NULL ); +irq_set_noprobe (virq + i); +irq_set_affinity (virq + i, &priv->lmask); + } + +return 0 ; + +fail: +imsic_ids_free (priv, hwirq,get_count_order (nr_irqs)); +return err; +} + +static void imsic_irq_domain_free (struct irq_domain *domain, +unsigned int virq, +unsigned int nr_irqs) +{ +struct irq_data *d =irq_domain_get_irq_data (domain, virq); +struct imsic_priv *priv = domain->host_data; + +imsic_ids_free (priv, d->hwirq,get_count_order (nr_irqs)); +irq_domain_free_irqs_parent (domain, virq, nr_irqs); +} + +static const struct irq_domain_ops imsic_base_domain_ops = { + .alloc = imsic_irq_domain_alloc, + .free = imsic_irq_domain_free, +}; + +#ifdef CONFIG_RISCV_IMSIC_PCI + +static void imsic_pci_mask_irq (struct irq_data *d) +{ +pci_msi_mask_irq (d); +irq_chip_mask_parent (d); +} + +static void imsic_pci_unmask_irq (struct irq_data *d) +{ +pci_msi_unmask_irq (d); +irq_chip_unmask_parent (d); +} + +static struct irq_chip imsic_pci_irq_chip = { + .name ="RISC-V IMSIC-PCI" , + .irq_mask = imsic_pci_mask_irq, + .irq_unmask = imsic_pci_unmask_irq, + .irq_eoi = irq_chip_eoi_parent, +}; + +static struct msi_domain_ops imsic_pci_domain_ops = { +}; + +static struct msi_domain_info imsic_pci_domain_info = { + .flags = (MSI_FLAG_USE_DEF_DOM_OPS |MSI_FLAG_USE_DEF_CHIP_OPS | +MSI_FLAG_PCI_MSIX |MSI_FLAG_MULTI_PCI_MSI ), + .ops = &imsic_pci_domain_ops, + .chip = &imsic_pci_irq_chip, +}; + +#endif + +static struct irq_chip imsic_plat_irq_chip = { + .name ="RISC-V IMSIC-PLAT" , +}; + +static struct msi_domain_ops imsic_plat_domain_ops = { +}; + +static struct msi_domain_info imsic_plat_domain_info = { + .flags = (MSI_FLAG_USE_DEF_DOM_OPS |MSI_FLAG_USE_DEF_CHIP_OPS ), + .ops = &imsic_plat_domain_ops, + .chip = &imsic_plat_irq_chip, +}; + +static int __init imsic_irq_domains_init (struct imsic_priv *priv, +struct fwnode_handle *fwnode) +{ +/* Create Base IRQ domain */ + priv->base_domain =irq_domain_create_tree (fwnode, + &imsic_base_domain_ops, priv); +if (!priv->base_domain) { +pr_err ("Failed to create IMSIC base domain\n" ); +return -ENOMEM ; + } +irq_domain_update_bus_token (priv->base_domain,DOMAIN_BUS_NEXUS ); + +#ifdef CONFIG_RISCV_IMSIC_PCI +/* Create PCI MSI domain */ + priv->pci_domain =pci_msi_create_irq_domain (fwnode, + &imsic_pci_domain_info, + priv->base_domain); +if (!priv->pci_domain) { +pr_err ("Failed to create IMSIC PCI domain\n" ); +irq_domain_remove (priv->base_domain); +return -ENOMEM ; + } +#endif + +/* Create Platform MSI domain */ + priv->plat_domain =platform_msi_create_irq_domain (fwnode, + &imsic_plat_domain_info, + priv->base_domain); +if (!priv->plat_domain) { +pr_err ("Failed to create IMSIC platform domain\n" ); +if (priv->pci_domain) +irq_domain_remove (priv->pci_domain); +irq_domain_remove (priv->base_domain); +return -ENOMEM ; + } + +return 0 ; +} + +/* +* To handle an interrupt, we read the TOPEI CSR and write zero in one +* instruction. If TOPEI CSR is non-zero then we translate TOPEI.ID to +* Linux interrupt number and let Linux IRQ subsystem handle it. +*/ +static void imsic_handle_irq (struct irq_desc *desc) +{ +struct imsic_handler *handler =this_cpu_ptr (&imsic_handlers); +struct irq_chip *chip =irq_desc_get_chip (desc); +struct imsic_priv *priv = handler->priv; +irq_hw_number_t hwirq; +int err; + +WARN_ON_ONCE (!handler->priv); + +chained_irq_enter (chip, desc); + +while ((hwirq =csr_swap (CSR_TOPEI ,0 ))) { + hwirq = hwirq >>TOPEI_ID_SHIFT ; + +if (hwirq == priv->ipi_id) { +#ifdef CONFIG_SMP +ipi_mux_process (); +#endif +continue ; + }else if (hwirq == priv->ipi_lsync_id) { +imsic_ids_local_sync (priv); +continue ; + } + + err =generic_handle_domain_irq (priv->base_domain, hwirq); +if (unlikely (err)) +pr_warn_ratelimited ( +"hwirq %lu mapping not found\n" , hwirq); + } + +chained_irq_exit (chip, desc); +} + +static int imsic_dying_cpu (unsigned int cpu) +{ +struct imsic_handler *handler =this_cpu_ptr (&imsic_handlers); +struct imsic_priv *priv = handler->priv; + +/* Disable per-CPU parent interrupt */ +if (imsic_parent_irq) +disable_percpu_irq (imsic_parent_irq); + +/* Locally disable interrupt delivery */ +imsic_ids_local_delivery (priv, false); + +/* Disable IPIs */ +imsic_ipi_disable (priv); + +return 0 ; +} + +static int imsic_starting_cpu (unsigned int cpu) +{ +struct imsic_handler *handler =this_cpu_ptr (&imsic_handlers); +struct imsic_priv *priv = handler->priv; + +/* Enable per-CPU parent interrupt */ +if (imsic_parent_irq) +enable_percpu_irq (imsic_parent_irq, +irq_get_trigger_type (imsic_parent_irq)); +else +pr_warn ("cpu%d: parent irq not available\n" , cpu); + +/* Enable IPIs */ +imsic_ipi_enable (priv); + +/* +* Interrupts identities might have been enabled/disabled while +* this CPU was not running so sync-up local enable/disable state. +*/ +imsic_ids_local_sync (priv); + +/* Locally enable interrupt delivery */ +imsic_ids_local_delivery (priv, true); + +return 0 ; +} + +struct imsic_fwnode_ops { +u32 (*nr_parent_irq)(struct fwnode_handle *fwnode, +void *fwopaque); +int (*parent_hartid)(struct fwnode_handle *fwnode, +void *fwopaque,u32 index, +unsigned long *out_hartid); +u32 (*nr_mmio)(struct fwnode_handle *fwnode,void *fwopaque); +int (*mmio_to_resource)(struct fwnode_handle *fwnode, +void *fwopaque,u32 index, +struct resource *res); +void __iomem *(*mmio_map)(struct fwnode_handle *fwnode, +void *fwopaque,u32 index); +int (*read_u32)(struct fwnode_handle *fwnode, +void *fwopaque,const char *prop,u32 *out_val); +bool (*read_bool)(struct fwnode_handle *fwnode, +void *fwopaque,const char *prop); +}; + +static int __init imsic_init (struct imsic_fwnode_ops *fwops, +struct fwnode_handle *fwnode, +void *fwopaque) +{ +struct resource res; +phys_addr_t base_addr; +int rc, nr_parent_irqs; +struct imsic_mmio *mmio; +struct imsic_priv *priv; +struct irq_domain *domain; +struct imsic_handler *handler; +struct imsic_global_config *global; +u32 i, tmp, nr_handlers =0 ; + +if (imsic_init_done) { +pr_err ("%pfwP: already initialized hence ignoring\n" , + fwnode); +return -ENODEV ; + } + +if (!riscv_isa_extension_available (NULL , SxAIA)) { +pr_err ("%pfwP: AIA support not available\n" , fwnode); +return -ENODEV ; + } + + priv =kzalloc (sizeof (*priv),GFP_KERNEL ); +if (!priv) +return -ENOMEM ; + global = &priv->global; + +/* Find number of parent interrupts */ + nr_parent_irqs = fwops->nr_parent_irq (fwnode, fwopaque); +if (!nr_parent_irqs) { +pr_err ("%pfwP: no parent irqs available\n" , fwnode); +return -EINVAL ; + } + +/* Find number of guest index bits in MSI address */ + rc = fwops->read_u32 (fwnode, fwopaque,"riscv,guest-index-bits" , + &global->guest_index_bits); +if (rc) + global->guest_index_bits =0 ; + tmp =BITS_PER_LONG -IMSIC_MMIO_PAGE_SHIFT ; +if (tmp < global->guest_index_bits) { +pr_err ("%pfwP: guest index bits too big\n" , fwnode); +return -EINVAL ; + } + +/* Find number of HART index bits */ + rc = fwops->read_u32 (fwnode, fwopaque,"riscv,hart-index-bits" , + &global->hart_index_bits); +if (rc) { +/* Assume default value */ + global->hart_index_bits =__fls (nr_parent_irqs); +if (BIT (global->hart_index_bits) < nr_parent_irqs) + global->hart_index_bits++; + } + tmp =BITS_PER_LONG -IMSIC_MMIO_PAGE_SHIFT - + global->guest_index_bits; +if (tmp < global->hart_index_bits) { +pr_err ("%pfwP: HART index bits too big\n" , fwnode); +return -EINVAL ; + } + +/* Find number of group index bits */ + rc = fwops->read_u32 (fwnode, fwopaque,"riscv,group-index-bits" , + &global->group_index_bits); +if (rc) + global->group_index_bits =0 ; + tmp =BITS_PER_LONG -IMSIC_MMIO_PAGE_SHIFT - + global->guest_index_bits - global->hart_index_bits; +if (tmp < global->group_index_bits) { +pr_err ("%pfwP: group index bits too big\n" , fwnode); +return -EINVAL ; + } + +/* Find first bit position of group index */ + tmp =IMSIC_MMIO_PAGE_SHIFT *2 ; + rc = fwops->read_u32 (fwnode, fwopaque,"riscv,group-index-shift" , + &global->group_index_shift); +if (rc) + global->group_index_shift = tmp; +if (global->group_index_shift < tmp) { +pr_err ("%pfwP: group index shift too small\n" , fwnode); +return -EINVAL ; + } + tmp = global->group_index_bits + global->group_index_shift -1 ; +if (tmp >=BITS_PER_LONG ) { +pr_err ("%pfwP: group index shift too big\n" , fwnode); +return -EINVAL ; + } + +/* Find number of interrupt identities */ + rc = fwops->read_u32 (fwnode, fwopaque,"riscv,num-ids" , + &global->nr_ids); +if (rc) { +pr_err ("%pfwP: number of interrupt identities not found\n" , + fwnode); +return rc; + } +if ((global->nr_ids <IMSIC_MIN_ID ) || + (global->nr_ids >=IMSIC_MAX_ID ) || + ((global->nr_ids &IMSIC_MIN_ID ) !=IMSIC_MIN_ID )) { +pr_err ("%pfwP: invalid number of interrupt identities\n" , + fwnode); +return -EINVAL ; + } + +/* Find number of guest interrupt identities */ +if (fwops->read_u32 (fwnode, fwopaque,"riscv,num-guest-ids" , + &global->nr_guest_ids)) + global->nr_guest_ids = global->nr_ids; +if ((global->nr_guest_ids <IMSIC_MIN_ID ) || + (global->nr_guest_ids >=IMSIC_MAX_ID ) || + ((global->nr_guest_ids &IMSIC_MIN_ID ) !=IMSIC_MIN_ID )) { +pr_err ("%pfwP: invalid number of guest interrupt identities\n" , + fwnode); +return -EINVAL ; + } + +/* Check if IPIs are slow */ + priv->slow_ipi = fwops->read_bool (fwnode, fwopaque,"riscv,slow-ipi" ); + +/* Compute base address */ + rc = fwops->mmio_to_resource (fwnode, fwopaque,0 , &res); +if (rc) { +pr_err ("%pfwP: first MMIO resource not found\n" , fwnode); +return -EINVAL ; + } + global->base_addr = res.start; + global->base_addr &= ~(BIT (global->guest_index_bits + + global->hart_index_bits + +IMSIC_MMIO_PAGE_SHIFT ) -1 ); + global->base_addr &= ~((BIT (global->group_index_bits) -1 ) << + global->group_index_shift); + +/* Find number of MMIO register sets */ + priv->num_mmios = fwops->nr_mmio (fwnode, fwopaque); + +/* Allocate MMIO register sets */ + priv->mmios =kcalloc (priv->num_mmios,sizeof (*mmio),GFP_KERNEL ); +if (!priv->mmios) { + rc = -ENOMEM ; + goto out_free_priv; + } + +/* Parse and map MMIO register sets */ +for (i =0 ; i < priv->num_mmios; i++) { + mmio = &priv->mmios[i]; + rc = fwops->mmio_to_resource (fwnode, fwopaque, i, &res); +if (rc) { +pr_err ("%pfwP: unable to parse MMIO regset %d\n" , + fwnode, i); + goto out_iounmap; + } + mmio->pa = res.start; + mmio->size = res.end - res.start +1 ; + + base_addr = mmio->pa; + base_addr &= ~(BIT (global->guest_index_bits + + global->hart_index_bits + +IMSIC_MMIO_PAGE_SHIFT ) -1 ); + base_addr &= ~((BIT (global->group_index_bits) -1 ) << + global->group_index_shift); +if (base_addr != global->base_addr) { + rc = -EINVAL ; +pr_err ("%pfwP: address mismatch for regset %d\n" , + fwnode, i); + goto out_iounmap; + } + + tmp =BIT (global->guest_index_bits) -1 ; +if ((mmio->size /IMSIC_MMIO_PAGE_SZ ) & tmp) { + rc = -EINVAL ; +pr_err ("%pfwP: size mismatch for regset %d\n" , + fwnode, i); + goto out_iounmap; + } + + mmio->va = fwops->mmio_map (fwnode, fwopaque, i); +if (!mmio->va) { + rc = -EIO ; +pr_err ("%pfwP: unable to map MMIO regset %d\n" , + fwnode, i); + goto out_iounmap; + } + } + +/* Initialize interrupt identity management */ + rc =imsic_ids_init (priv); +if (rc) { +pr_err ("%pfwP: failed to initialize interrupt management\n" , + fwnode); + goto out_iounmap; + } + +/* Configure handlers for target CPUs */ +for (i =0 ; i < nr_parent_irqs; i++) { +unsigned long reloff, hartid; +int j, cpu; + + rc = fwops->parent_hartid (fwnode, fwopaque, i, &hartid); +if (rc) { +pr_warn ("%pfwP: hart ID for parent irq%d not found\n" , + fwnode, i); +continue ; + } + + cpu =riscv_hartid_to_cpuid (hartid); +if (cpu <0 ) { +pr_warn ("%pfwP: invalid cpuid for parent irq%d\n" , + fwnode, i); +continue ; + } + +/* Find MMIO location of MSI page */ + mmio =NULL ; + reloff = i *BIT (global->guest_index_bits) * +IMSIC_MMIO_PAGE_SZ ; +for (j =0 ; priv->num_mmios; j++) { +if (reloff < priv->mmios[j].size) { + mmio = &priv->mmios[j]; +break ; + } + + reloff -= priv->mmios[j].size; + } +if (!mmio) { +pr_warn ("%pfwP: MMIO not found for parent irq%d\n" , + fwnode, i); +continue ; + } + + handler =per_cpu_ptr (&imsic_handlers, cpu); +if (handler->priv) { +pr_warn ("%pfwP: CPU%d handler already configured.\n" , + fwnode, cpu); + goto done; + } + +cpumask_set_cpu (cpu, &priv->lmask); + handler->local.msi_pa = mmio->pa + reloff; + handler->local.msi_va = mmio->va + reloff; + handler->priv = priv; + +done: + nr_handlers++; + } + +/* If no CPU handlers found then can't take interrupts */ +if (!nr_handlers) { +pr_err ("%pfwP: No CPU handlers found\n" , fwnode); + rc = -ENODEV ; + goto out_ids_cleanup; + } + +/* Find parent domain and register chained handler */ + domain =irq_find_matching_fwnode (riscv_get_intc_hwnode (), +DOMAIN_BUS_ANY ); +if (!domain) { +pr_err ("%pfwP: Failed to find INTC domain\n" , fwnode); + rc = -ENOENT ; + goto out_ids_cleanup; + } + imsic_parent_irq =irq_create_mapping (domain,RV_IRQ_EXT ); +if (!imsic_parent_irq) { +pr_err ("%pfwP: Failed to create INTC mapping\n" , fwnode); + rc = -ENOENT ; + goto out_ids_cleanup; + } +irq_set_chained_handler (imsic_parent_irq, imsic_handle_irq); + +/* Initialize IPI domain */ + rc =imsic_ipi_domain_init (priv); +if (rc) { +pr_err ("%pfwP: Failed to initialize IPI domain\n" , fwnode); + goto out_ids_cleanup; + } + +/* Initialize IRQ and MSI domains */ + rc =imsic_irq_domains_init (priv, fwnode); +if (rc) { +pr_err ("%pfwP: Failed to initialize IRQ and MSI domains\n" , + fwnode); + goto out_ipi_domain_cleanup; + } + +/* Setup cpuhp state */ +cpuhp_setup_state (CPUHP_AP_ONLINE_DYN , +"irqchip/riscv/imsic:starting" , + imsic_starting_cpu, imsic_dying_cpu); + +/* +* Only one IMSIC instance allowed in a platform for clean +* implementation of SMP IRQ affinity and per-CPU IPIs. +* +* This means on a multi-socket (or multi-die) platform we +* will have multiple MMIO regions for one IMSIC instance. +*/ + imsic_init_done = true; + +pr_info ("%pfwP: hart-index-bits: %d, guest-index-bits: %d\n" , + fwnode, global->hart_index_bits, global->guest_index_bits); +pr_info ("%pfwP: group-index-bits: %d, group-index-shift: %d\n" , + fwnode, global->group_index_bits, global->group_index_shift); +pr_info ("%pfwP: mapped %d interrupts for %d CPUs at %pa\n" , + fwnode, global->nr_ids, nr_handlers, &global->base_addr); +if (priv->ipi_lsync_id) +pr_info ("%pfwP: enable/disable sync using interrupt %d\n" , + fwnode, priv->ipi_lsync_id); +if (priv->ipi_id) +pr_info ("%pfwP: providing IPIs using interrupt %d\n" , + fwnode, priv->ipi_id); + +return 0 ; + +out_ipi_domain_cleanup: +imsic_ipi_domain_cleanup (priv); +out_ids_cleanup: +imsic_ids_cleanup (priv); +out_iounmap: +for (i =0 ; i < priv->num_mmios; i++) { +if (priv->mmios[i].va) +iounmap (priv->mmios[i].va); + } +kfree (priv->mmios); +out_free_priv: +kfree (priv); +return rc; +} + +static u32 __init imsic_dt_nr_parent_irq (struct fwnode_handle *fwnode, +void *fwopaque) +{ +return of_irq_count (to_of_node (fwnode)); +} + +static int __init imsic_dt_parent_hartid (struct fwnode_handle *fwnode, +void *fwopaque,u32 index, +unsigned long *out_hartid) +{ +struct of_phandle_args parent; +int rc; + + rc =of_irq_parse_one (to_of_node (fwnode), index, &parent); +if (rc) +return rc; + +/* +* Skip interrupts other than external interrupts for +* current privilege level. +*/ +if (parent.args[0 ] !=RV_IRQ_EXT ) +return -EINVAL ; + +return riscv_of_parent_hartid (parent.np, out_hartid); +} + +static u32 __init imsic_dt_nr_mmio (struct fwnode_handle *fwnode, +void *fwopaque) +{ +u32 ret =0 ; +struct resource res; + +while (!of_address_to_resource (to_of_node (fwnode), ret, &res)) + ret++; + +return ret; +} + +static int __init imsic_mmio_to_resource (struct fwnode_handle *fwnode, +void *fwopaque,u32 index, +struct resource *res) +{ +return of_address_to_resource (to_of_node (fwnode), index, res); +} + +static void __iomem __init *imsic_dt_mmio_map (struct fwnode_handle *fwnode, +void *fwopaque,u32 index) +{ +return of_iomap (to_of_node (fwnode), index); +} + +static int __init imsic_dt_read_u32 (struct fwnode_handle *fwnode, +void *fwopaque,const char *prop, +u32 *out_val) +{ +return of_property_read_u32 (to_of_node (fwnode), prop, out_val); +} + +static bool __init imsic_dt_read_bool (struct fwnode_handle *fwnode, +void *fwopaque,const char *prop) +{ +return of_property_read_bool (to_of_node (fwnode), prop); +} + +static int __init imsic_dt_init (struct device_node *node, +struct device_node *parent) +{ +struct imsic_fwnode_ops ops = { + .nr_parent_irq = imsic_dt_nr_parent_irq, + .parent_hartid = imsic_dt_parent_hartid, + .nr_mmio = imsic_dt_nr_mmio, + .mmio_to_resource = imsic_mmio_to_resource, + .mmio_map = imsic_dt_mmio_map, + .read_u32 = imsic_dt_read_u32, + .read_bool = imsic_dt_read_bool, + }; + +return imsic_init (&ops, &node->fwnode,NULL ); +} +IRQCHIP_DECLARE (riscv_imsic,"riscv,imsics" , imsic_dt_init);include/linux/irqchip/riscv-imsic.h new file +92
-1@@ -0,0 +1,92 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* +* Copyright (C) 2021 Western Digital Corporation or its affiliates. +* Copyright (C) 2022 Ventana Micro Systems Inc. +*/ +#ifndef __LINUX_IRQCHIP_RISCV_IMSIC_H +#define __LINUX_IRQCHIP_RISCV_IMSIC_H + +#include <linux/types.h> +#include <asm/csr.h> + +#define IMSIC_MMIO_PAGE_SHIFT 12 +#define IMSIC_MMIO_PAGE_SZ (1UL << IMSIC_MMIO_PAGE_SHIFT) +#define IMSIC_MMIO_PAGE_LE 0x00 +#define IMSIC_MMIO_PAGE_BE 0x04 + +#define IMSIC_MIN_ID 63 +#define IMSIC_MAX_ID 2048 + +#define IMSIC_EIDELIVERY 0x70 + +#define IMSIC_EITHRESHOLD 0x72 + +#define IMSIC_EIP0 0x80 +#define IMSIC_EIP63 0xbf +#define IMSIC_EIPx_BITS 32 + +#define IMSIC_EIE0 0xc0 +#define IMSIC_EIE63 0xff +#define IMSIC_EIEx_BITS 32 + +#define IMSIC_FIRST IMSIC_EIDELIVERY +#define IMSIC_LAST IMSIC_EIE63 + +#define IMSIC_MMIO_SETIPNUM_LE 0x00 +#define IMSIC_MMIO_SETIPNUM_BE 0x04 + +struct imsic_global_config { +/* +* MSI Target Address Scheme +* +* XLEN-1 12 0 +* | | | +* ------------------------------------------------------------- +* |xxxxxx|Group Index|xxxxxxxxxxx|HART Index|Guest Index| 0 | +* ------------------------------------------------------------- +*/ + +/* Bits representing Guest index, HART index, and Group index */ +u32 guest_index_bits; +u32 hart_index_bits; +u32 group_index_bits; +u32 group_index_shift; + +/* Global base address matching all target MSI addresses */ +phys_addr_t base_addr; + +/* Number of interrupt identities */ +u32 nr_ids; + +/* Number of guest interrupt identities */ +u32 nr_guest_ids; +}; + +struct imsic_local_config { +phys_addr_t msi_pa; +void __iomem *msi_va; +}; + +#ifdef CONFIG_RISCV_IMSIC + +extern const struct imsic_global_config *imsic_get_global_config (void ); + +extern const struct imsic_local_config *imsic_get_local_config ( +unsigned int cpu); + +#else + +static inline const struct imsic_global_config *imsic_get_global_config (void ) +{ +return NULL ; +} + +static inline const struct imsic_local_config *imsic_get_local_config ( +unsigned int cpu) +{ +return NULL ; +} + +#endif + +#endif --2.34.1
Anup Patel
maintainerRe: [PATCH 5/9] irqchip: Add RISC-V incoming MSI controller driver
Quoted 326 lines · Andrew Bresticker
Quoted 271 lines · Anup Patel
The RISC-V advanced interrupt architecture (AIA) specification defines a new MSI controller for managing MSIs on a RISC-V platform. This new MSI controller is referred to as incoming message signaled interrupt controller (IMSIC) which manages MSI on per-HART (or per-CPU) basis. (For more details refer https://github.com/riscv/riscv-aia)
This patch adds an irqchip driver for RISC-V IMSIC found on RISC-V platforms.
Signed-off-by Anup Patel <[email protected]>--- drivers/irqchip/Kconfig | 20 +- drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-riscv-imsic.c | 1207 +++++++++++++++++++++++++++ include/linux/irqchip/riscv-imsic.h | 92 ++ 4 files changed, 1319 insertions(+), 1 deletion(-) create mode 100644 drivers/irqchip/irq-riscv-imsic.c create mode 100644 include/linux/irqchip/riscv-imsic.hdrivers/irqchip/Kconfig +19
-1@@ -29,7 +29,6 @@ config ARM_GIC_V2M config GIC_NON_BANKED bool - config ARM_GIC_V3 bool select IRQ_DOMAIN_HIERARCHY@@ -564,6 +563,25 @@ config SIFIVE_PLIC If you don't know what to do here, say Y. +config RISCV_IMSIC + bool "RISC-V Incoming MSI Controller" + depends on RISCV + select IRQ_DOMAIN_HIERARCHY + select GENERIC_MSI_IRQ_DOMAIN + help + This enables support for the IMSIC chip found in RISC-V systems. + The IMSIC controls message signaled interrupts and forwards them + to each core as wired local interrupt. + + If you don't know what to do here, say Y. + +config RISCV_IMSIC_PCI + bool + depends on RISCV_IMSIC + depends on PCI + depends on PCI_MSI + default RISCV_IMSIC + config EXYNOS_IRQ_COMBINER bool "Samsung Exynos IRQ combiner support" if COMPILE_TEST depends on (ARCH_EXYNOS && ARM) || COMPILE_TESTdrivers/irqchip/Makefile +1
-0@@ -96,6 +96,7 @@ obj-$(CONFIG_QCOM_MPM) += irq-qcom-mpm.o obj-$(CONFIG_CSKY_MPINTC) += irq-csky-mpintc.o obj-$(CONFIG_CSKY_APB_INTC) += irq-csky-apb-intc.o obj-$(CONFIG_RISCV_INTC) += irq-riscv-intc.o +obj-$(CONFIG_RISCV_IMSIC) += irq-riscv-imsic.o obj-$(CONFIG_SIFIVE_PLIC) += irq-sifive-plic.o obj-$(CONFIG_IMX_IRQSTEER) += irq-imx-irqsteer.o obj-$(CONFIG_IMX_INTMUX) += irq-imx-intmux.odrivers/irqchip/irq-riscv-imsic.c new file +195
-0@@ -0,0 +1,1207 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Copyright (C) 2021 Western Digital Corporation or its affiliates. +* Copyright (C) 2022 Ventana Micro Systems Inc. +*/ + +#define pr_fmt (fmt) "riscv-imsic: " fmt +#include <linux/bitmap.h> +#include <linux/cpu.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/iommu.h> +#include <linux/irq.h> +#include <linux/irqchip.h> +#include <linux/irqchip/chained_irq.h> +#include <linux/irqchip/riscv-imsic.h> +#include <linux/irqdomain.h> +#include <linux/module.h> +#include <linux/msi.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/pci.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> +#include <linux/smp.h> +#include <asm/hwcap.h> + +#define IMSIC_DISABLE_EIDELIVERY 0 +#define IMSIC_ENABLE_EIDELIVERY 1 +#define IMSIC_DISABLE_EITHRESHOLD 1 +#define IMSIC_ENABLE_EITHRESHOLD 0 + +#define imsic_csr_write (__c, __v) \ +do { \ + csr_write(CSR_ISELECT, __c); \ + csr_write(CSR_IREG, __v); \ +} while (0) + +#define imsic_csr_read (__c) \ +({ \ + unsigned long __v; \ + csr_write(CSR_ISELECT, __c); \ + __v = csr_read(CSR_IREG); \ + __v; \ +}) + +#define imsic_csr_set (__c, __v) \ +do { \ + csr_write(CSR_ISELECT, __c); \ + csr_set(CSR_IREG, __v); \ +} while (0) + +#define imsic_csr_clear (__c, __v) \ +do { \ + csr_write(CSR_ISELECT, __c); \ + csr_clear(CSR_IREG, __v); \ +} while (0) + +struct imsic_mmio { +phys_addr_t pa; +void __iomem *va; +unsigned long size; +}; + +struct imsic_priv { +/* Global configuration common for all HARTs */ +struct imsic_global_config global; + +/* MMIO regions */ +u32 num_mmios; +struct imsic_mmio *mmios; + +/* Global state of interrupt identities */ +raw_spinlock_t ids_lock; +unsigned long *ids_used_bimap; +unsigned long *ids_enabled_bimap; +unsigned int *ids_target_cpu; + +/* Mask for connected CPUs */ +struct cpumask lmask; + +/* IPI interrupt identity */ +bool slow_ipi; +u32 ipi_id; +u32 ipi_lsync_id; + +/* IRQ domains */ +struct irq_domain *base_domain; +struct irq_domain *pci_domain; +struct irq_domain *plat_domain; +}; + +struct imsic_handler { +/* Local configuration for given HART */ +struct imsic_local_config local; + +/* Pointer to private context */ +struct imsic_priv *priv; +}; + +static bool imsic_init_done; + +static int imsic_parent_irq; +static DEFINE_PER_CPU(struct imsic_handler, imsic_handlers); + +const struct imsic_global_config *imsic_get_global_config (void ) +{ +struct imsic_handler *handler =this_cpu_ptr (&imsic_handlers); + +if (!handler || !handler->priv) +return NULL ; + +return &handler->priv->global; +} +EXPORT_SYMBOL_GPL (imsic_get_global_config); + +const struct imsic_local_config *imsic_get_local_config (unsigned int cpu) +{ +struct imsic_handler *handler =per_cpu_ptr (&imsic_handlers, cpu); + +if (!handler || !handler->priv) +return NULL ; + +return &handler->local; +} +EXPORT_SYMBOL_GPL (imsic_get_local_config); + +static int imsic_cpu_page_phys (unsigned int cpu, +unsigned int guest_index, +phys_addr_t *out_msi_pa) +{ +struct imsic_handler *handler =per_cpu_ptr (&imsic_handlers, cpu); +struct imsic_global_config *global; +struct imsic_local_config *local; + +if (!handler || !handler->priv) +return -ENODEV ; + local = &handler->local; + global = &handler->priv->global; + +if (BIT (global->guest_index_bits) <= guest_index) +return -EINVAL ; + +if (out_msi_pa) + *out_msi_pa = local->msi_pa + + (guest_index *IMSIC_MMIO_PAGE_SZ ); + +return 0 ; +} + +static int imsic_get_cpu (struct imsic_priv *priv, +const struct cpumask *mask_val,bool force, +unsigned int *out_target_cpu) +{ +struct cpumask amask; +unsigned int cpu; + +cpumask_and (&amask, &priv->lmask, mask_val); + +if (force) + cpu =cpumask_first (&amask); +else + cpu =cpumask_any_and (&amask, cpu_online_mask); + +if (cpu >= nr_cpu_ids) +return -EINVAL ; + +if (out_target_cpu) + *out_target_cpu = cpu; + +return 0 ; +} + +static int imsic_get_cpu_msi_msg (unsigned int cpu,unsigned int id, +struct msi_msg *msg) +{ +phys_addr_t msi_addr; +int err; + + err =imsic_cpu_page_phys (cpu,0 , &msi_addr); +if (err) +return err; + + msg->address_hi =upper_32_bits (msi_addr); + msg->address_lo =lower_32_bits (msi_addr); + msg->data = id; + +return err; +} + +static void imsic_id_set_target (struct imsic_priv *priv, +unsigned int id,unsigned int target_cpu) +{ +raw_spin_lock (&priv->ids_lock);drivers/irqchip/irq-riscv-imsic.c line 205
Quoted 10 lines
drivers/irqchip/irq-riscv-imsic.c new file +10
-0+ priv->ids_target_cpu[id] = target_cpu; +raw_spin_unlock (&priv->ids_lock); +} + +static unsigned int imsic_id_get_target (struct imsic_priv *priv, +unsigned int id) +{ +unsigned int ret; + +raw_spin_lock (&priv->ids_lock);This needs to be a
raw_spin_lock_irqsave()since hardirqs are enabled here and we also takepriv->ids_lockin hardirq context (viaimsic_ids_local_sync()). Booting with lockdep enabled produces this splat:[ 1.830055] ================================ [ 1.830227] WARNING: inconsistent lock state [ 1.830425] 6.1.0-rc4-00026-g78e09ffc5534 #42 Not tainted [ 1.830655] -------------------------------- [ 1.830784] inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage. [ 1.830972] swapper/0/1 [HC1[1]:SC0[0]:HE0:SE1] takes: [ 1.831162] ff6000000229d048 (&priv->ids_lock){?.+.}-{2:2}, at: imsic_ids_local_sync+0x1e/0x98 [ 1.831951] {HARDIRQ-ON-W} state was registered at: [ 1.832132] __lock_acquire+0x93c/0x1e0c [ 1.832305] lock_acquire+0xfa/0x2da [ 1.832412] _raw_spin_lock+0x2c/0x40 [ 1.832531] imsic_ids_local_sync+0x1e/0x98 [ 1.832674] imsic_starting_cpu+0x72/0xac [ 1.832852] cpuhp_invoke_callback+0x18c/0x93c [ 1.833033] cpuhp_thread_fun+0x156/0x1b0 [ 1.833158] smpboot_thread_fn+0xea/0x1c8 [ 1.833293] kthread+0xc8/0xde [ 1.833391] ret_from_exception+0x0/0x10 [ 1.833530] irq event stamp: 33336 [ 1.833647] hardirqs last enabled at (33335): [<ffffffff808f2fcc>] _raw_spin_unlock_irqrestore+0x4c/0x4e [ 1.833925] hardirqs last disabled at (33336): [<ffffffff800082f4>] __trace_hardirqs_off+0xc/0x14 [ 1.834179] softirqs last enabled at (33056): [<ffffffff808f3f3e>] __do_softirq+0x3de/0x51e [ 1.834450] softirqs last disabled at (33051): [<ffffffff8001788a>] irq_exit+0xd6/0x104 [ 1.834705] [ 1.834705] other info that might help us debug this: [ 1.834925] Possible unsafe locking scenario: [ 1.834925] [ 1.835093] CPU0 [ 1.835176] ---- [ 1.835253] lock(&priv->ids_lock); [ 1.835381] <Interrupt> [ 1.835462] lock(&priv->ids_lock);
Quoted 4 lines
...
Applies here and elsewhere where
priv->ids_lockis taken in a possibly hardirqs-enabled context.
Okay, I will use raw_spin_lock_irqsave() here.
Thanks,
Anup
Quoted 1,106 lines
-Andrew
Quoted 1,103 lines
drivers/irqchip/irq-riscv-imsic.c new file +1002
-0+ ret = priv->ids_target_cpu[id]; +raw_spin_unlock (&priv->ids_lock); + +return ret; +} + +static void __imsic_eix_update (unsigned long base_id, +unsigned long num_id,bool pend,bool val) +{ +unsigned long i, isel, ireg, flags; +unsigned long id = base_id, last_id = base_id + num_id; + +while (id < last_id) { + isel = id /BITS_PER_LONG ; + isel *=BITS_PER_LONG / IMSIC_EIPx_BITS; + isel += (pend) ?IMSIC_EIP0 :IMSIC_EIE0 ; + + ireg =0 ; +for (i = id & (__riscv_xlen -1 ); + (id < last_id) && (i < __riscv_xlen); i++) { + ireg |=BIT (i); + id++; + } + +/* +* The IMSIC EIEx and EIPx registers are indirectly +* accessed via using ISELECT and IREG CSRs so we +* save/restore local IRQ to ensure that we don't +* get preempted while accessing IMSIC registers. +*/ +local_irq_save (flags); +if (val) +imsic_csr_set (isel, ireg); +else +imsic_csr_clear (isel, ireg); +local_irq_restore (flags); + } +} + +#define __imsic_id_enable (__id) \ + __imsic_eix_update((__id), 1, false, true) +#define __imsic_id_disable (__id) \ + __imsic_eix_update((__id), 1, false, false) + +#ifdef CONFIG_SMP +static void __imsic_id_smp_sync (struct imsic_priv *priv) +{ +struct imsic_handler *handler; +struct cpumask amask; +int cpu; + +cpumask_and (&amask, &priv->lmask, cpu_online_mask); +for_each_cpu (cpu, &amask) { +if (cpu ==smp_processor_id ()) +continue ; + + handler =per_cpu_ptr (&imsic_handlers, cpu); +if (!handler || !handler->priv || !handler->local.msi_va) { +pr_warn ("CPU%d: handler not initialized\n" , cpu); +continue ; + } + +writel (handler->priv->ipi_lsync_id, handler->local.msi_va); + } +} +#else +#define __imsic_id_smp_sync (__priv) +#endif + +static void imsic_id_enable (struct imsic_priv *priv,unsigned int id) +{ +raw_spin_lock (&priv->ids_lock); +bitmap_set (priv->ids_enabled_bimap, id,1 ); +__imsic_id_enable (id); +raw_spin_unlock (&priv->ids_lock); + +__imsic_id_smp_sync (priv); +} + +static void imsic_id_disable (struct imsic_priv *priv,unsigned int id) +{ +raw_spin_lock (&priv->ids_lock); +bitmap_clear (priv->ids_enabled_bimap, id,1 ); +__imsic_id_disable (id); +raw_spin_unlock (&priv->ids_lock); + +__imsic_id_smp_sync (priv); +} + +static void imsic_ids_local_sync (struct imsic_priv *priv) +{ +int i; + +raw_spin_lock (&priv->ids_lock); +for (i =1 ; i <= priv->global.nr_ids; i++) { +if (priv->ipi_id == i || priv->ipi_lsync_id == i) +continue ; + +if (test_bit (i, priv->ids_enabled_bimap)) +__imsic_id_enable (i); +else +__imsic_id_disable (i); + } +raw_spin_unlock (&priv->ids_lock); +} + +static void imsic_ids_local_delivery (struct imsic_priv *priv,bool enable) +{ +if (enable) { +imsic_csr_write (IMSIC_EITHRESHOLD ,IMSIC_ENABLE_EITHRESHOLD ); +imsic_csr_write (IMSIC_EIDELIVERY ,IMSIC_ENABLE_EIDELIVERY ); + }else { +imsic_csr_write (IMSIC_EIDELIVERY ,IMSIC_DISABLE_EIDELIVERY ); +imsic_csr_write (IMSIC_EITHRESHOLD ,IMSIC_DISABLE_EITHRESHOLD ); + } +} + +static int imsic_ids_alloc (struct imsic_priv *priv, +unsigned int max_id,unsigned int order) +{ +int ret; + +if ((priv->global.nr_ids < max_id) || + (max_id <BIT (order))) +return -EINVAL ; + +raw_spin_lock (&priv->ids_lock); + ret =bitmap_find_free_region (priv->ids_used_bimap, + max_id +1 , order); +raw_spin_unlock (&priv->ids_lock); + +return ret; +} + +static void imsic_ids_free (struct imsic_priv *priv,unsigned int base_id, +unsigned int order) +{ +raw_spin_lock (&priv->ids_lock); +bitmap_release_region (priv->ids_used_bimap, base_id, order); +raw_spin_unlock (&priv->ids_lock); +} + +static int __init imsic_ids_init (struct imsic_priv *priv) +{ +int i; +struct imsic_global_config *global = &priv->global; + +raw_spin_lock_init (&priv->ids_lock); + +/* Allocate used bitmap */ + priv->ids_used_bimap =kcalloc (BITS_TO_LONGS (global->nr_ids +1 ), +sizeof (unsigned long ),GFP_KERNEL ); +if (!priv->ids_used_bimap) +return -ENOMEM ; + +/* Allocate enabled bitmap */ + priv->ids_enabled_bimap =kcalloc (BITS_TO_LONGS (global->nr_ids +1 ), +sizeof (unsigned long ),GFP_KERNEL ); +if (!priv->ids_enabled_bimap) { +kfree (priv->ids_used_bimap); +return -ENOMEM ; + } + +/* Allocate target CPU array */ + priv->ids_target_cpu =kcalloc (global->nr_ids +1 , +sizeof (unsigned int ),GFP_KERNEL ); +if (!priv->ids_target_cpu) { +kfree (priv->ids_enabled_bimap); +kfree (priv->ids_used_bimap); +return -ENOMEM ; + } +for (i =0 ; i <= global->nr_ids; i++) + priv->ids_target_cpu[i] =UINT_MAX ; + +/* Reserve ID#0 because it is special and never implemented */ +bitmap_set (priv->ids_used_bimap,0 ,1 ); + +return 0 ; +} + +static void __init imsic_ids_cleanup (struct imsic_priv *priv) +{ +kfree (priv->ids_target_cpu); +kfree (priv->ids_enabled_bimap); +kfree (priv->ids_used_bimap); +} + +#ifdef CONFIG_SMP +static void imsic_ipi_send_mask (unsigned int parent_virq,void *data, +const struct cpumask *mask) +{ +int cpu; +struct imsic_handler *handler; + +for_each_cpu (cpu, mask) { + handler =per_cpu_ptr (&imsic_handlers, cpu); +if (!handler || !handler->priv || !handler->local.msi_va) { +pr_warn ("CPU%d: handler not initialized\n" , cpu); +continue ; + } + +writel (handler->priv->ipi_id, handler->local.msi_va); + } +} + +static struct ipi_mux_ops imsic_ipi_ops = { + .ipi_mux_send = imsic_ipi_send_mask, +}; + +static void imsic_ipi_enable (struct imsic_priv *priv) +{ +__imsic_id_enable (priv->ipi_id); +__imsic_id_enable (priv->ipi_lsync_id); +} + +static void imsic_ipi_disable (struct imsic_priv *priv) +{ +__imsic_id_disable (priv->ipi_lsync_id); +__imsic_id_disable (priv->ipi_id); +} + +static int __init imsic_ipi_domain_init (struct imsic_priv *priv) +{ +int virq; + +/* Skip IPI setup if IPIs are slow */ +if (priv->slow_ipi) + goto skip_ipi; + +/* Allocate interrupt identity for IPIs */ + virq =imsic_ids_alloc (priv, priv->global.nr_ids,get_count_order (1 )); +if (virq <0 ) +return virq; + priv->ipi_id = virq; + +/* Create IMSIC IPI multiplexing */ + virq =ipi_mux_create (0 ,BITS_PER_BYTE , &imsic_ipi_ops,NULL ); +if (virq <=0 ) { +imsic_ids_free (priv, priv->ipi_id,get_count_order (1 )); +return (virq <0 ) ? virq : -ENOMEM ; + } + +/* Set vIRQ range */ +riscv_ipi_set_virq_range (virq,BITS_PER_BYTE , true); + +skip_ipi: +/* Allocate interrupt identity for local enable/disable sync */ + virq =imsic_ids_alloc (priv, priv->global.nr_ids,get_count_order (1 )); +if (virq <0 ) { +imsic_ids_free (priv, priv->ipi_id,get_count_order (1 )); +return virq; + } + priv->ipi_lsync_id = virq; + +return 0 ; +} + +static void __init imsic_ipi_domain_cleanup (struct imsic_priv *priv) +{ +imsic_ids_free (priv, priv->ipi_lsync_id,get_count_order (1 )); +if (priv->ipi_id) +imsic_ids_free (priv, priv->ipi_id,get_count_order (1 )); +} +#else +static void imsic_ipi_enable (struct imsic_priv *priv) +{ +} + +static void imsic_ipi_disable (struct imsic_priv *priv) +{ +} + +static int __init imsic_ipi_domain_init (struct imsic_priv *priv) +{ +/* Clear the IPI ids because we are not using IPIs */ + priv->ipi_id =0 ; + priv->ipi_lsync_id =0 ; +return 0 ; +} + +static void __init imsic_ipi_domain_cleanup (struct imsic_priv *priv) +{ +} +#endif + +static void imsic_irq_mask (struct irq_data *d) +{ +imsic_id_disable (irq_data_get_irq_chip_data (d), d->hwirq); +} + +static void imsic_irq_unmask (struct irq_data *d) +{ +imsic_id_enable (irq_data_get_irq_chip_data (d), d->hwirq); +} + +static void imsic_irq_compose_msi_msg (struct irq_data *d, +struct msi_msg *msg) +{ +struct imsic_priv *priv =irq_data_get_irq_chip_data (d); +unsigned int cpu; +int err; + + cpu =imsic_id_get_target (priv, d->hwirq); +WARN_ON (cpu ==UINT_MAX ); + + err =imsic_get_cpu_msi_msg (cpu, d->hwirq, msg); +WARN_ON (err); + +iommu_dma_compose_msi_msg (irq_data_get_msi_desc (d), msg); +} + +#ifdef CONFIG_SMP +static int imsic_irq_set_affinity (struct irq_data *d, +const struct cpumask *mask_val, +bool force) +{ +struct imsic_priv *priv =irq_data_get_irq_chip_data (d); +unsigned int target_cpu; +int rc; + + rc =imsic_get_cpu (priv, mask_val, force, &target_cpu); +if (rc) +return rc; + +imsic_id_set_target (priv, d->hwirq, target_cpu); +irq_data_update_effective_affinity (d,cpumask_of (target_cpu)); + +return IRQ_SET_MASK_OK ; +} +#endif + +static struct irq_chip imsic_irq_base_chip = { + .name ="RISC-V IMSIC-BASE" , + .irq_mask = imsic_irq_mask, + .irq_unmask = imsic_irq_unmask, +#ifdef CONFIG_SMP + .irq_set_affinity = imsic_irq_set_affinity, +#endif + .irq_compose_msi_msg = imsic_irq_compose_msi_msg, + .flags =IRQCHIP_SKIP_SET_WAKE | +IRQCHIP_MASK_ON_SUSPEND , +}; + +static int imsic_irq_domain_alloc (struct irq_domain *domain, +unsigned int virq, +unsigned int nr_irqs, +void *args) +{ +struct imsic_priv *priv = domain->host_data; +msi_alloc_info_t *info = args; +phys_addr_t msi_addr; +int i, hwirq, err =0 ; +unsigned int cpu; + + err =imsic_get_cpu (priv, &priv->lmask, false, &cpu); +if (err) +return err; + + err =imsic_cpu_page_phys (cpu,0 , &msi_addr); +if (err) +return err; + + hwirq =imsic_ids_alloc (priv, priv->global.nr_ids, +get_count_order (nr_irqs)); +if (hwirq <0 ) +return hwirq; + + err =iommu_dma_prepare_msi (info->desc, msi_addr); +if (err) + goto fail; + +for (i =0 ; i < nr_irqs; i++) { +imsic_id_set_target (priv, hwirq + i, cpu); +irq_domain_set_info (domain, virq + i, hwirq + i, + &imsic_irq_base_chip, priv, + handle_simple_irq,NULL ,NULL ); +irq_set_noprobe (virq + i); +irq_set_affinity (virq + i, &priv->lmask); + } + +return 0 ; + +fail: +imsic_ids_free (priv, hwirq,get_count_order (nr_irqs)); +return err; +} + +static void imsic_irq_domain_free (struct irq_domain *domain, +unsigned int virq, +unsigned int nr_irqs) +{ +struct irq_data *d =irq_domain_get_irq_data (domain, virq); +struct imsic_priv *priv = domain->host_data; + +imsic_ids_free (priv, d->hwirq,get_count_order (nr_irqs)); +irq_domain_free_irqs_parent (domain, virq, nr_irqs); +} + +static const struct irq_domain_ops imsic_base_domain_ops = { + .alloc = imsic_irq_domain_alloc, + .free = imsic_irq_domain_free, +}; + +#ifdef CONFIG_RISCV_IMSIC_PCI + +static void imsic_pci_mask_irq (struct irq_data *d) +{ +pci_msi_mask_irq (d); +irq_chip_mask_parent (d); +} + +static void imsic_pci_unmask_irq (struct irq_data *d) +{ +pci_msi_unmask_irq (d); +irq_chip_unmask_parent (d); +} + +static struct irq_chip imsic_pci_irq_chip = { + .name ="RISC-V IMSIC-PCI" , + .irq_mask = imsic_pci_mask_irq, + .irq_unmask = imsic_pci_unmask_irq, + .irq_eoi = irq_chip_eoi_parent, +}; + +static struct msi_domain_ops imsic_pci_domain_ops = { +}; + +static struct msi_domain_info imsic_pci_domain_info = { + .flags = (MSI_FLAG_USE_DEF_DOM_OPS |MSI_FLAG_USE_DEF_CHIP_OPS | +MSI_FLAG_PCI_MSIX |MSI_FLAG_MULTI_PCI_MSI ), + .ops = &imsic_pci_domain_ops, + .chip = &imsic_pci_irq_chip, +}; + +#endif + +static struct irq_chip imsic_plat_irq_chip = { + .name ="RISC-V IMSIC-PLAT" , +}; + +static struct msi_domain_ops imsic_plat_domain_ops = { +}; + +static struct msi_domain_info imsic_plat_domain_info = { + .flags = (MSI_FLAG_USE_DEF_DOM_OPS |MSI_FLAG_USE_DEF_CHIP_OPS ), + .ops = &imsic_plat_domain_ops, + .chip = &imsic_plat_irq_chip, +}; + +static int __init imsic_irq_domains_init (struct imsic_priv *priv, +struct fwnode_handle *fwnode) +{ +/* Create Base IRQ domain */ + priv->base_domain =irq_domain_create_tree (fwnode, + &imsic_base_domain_ops, priv); +if (!priv->base_domain) { +pr_err ("Failed to create IMSIC base domain\n" ); +return -ENOMEM ; + } +irq_domain_update_bus_token (priv->base_domain,DOMAIN_BUS_NEXUS ); + +#ifdef CONFIG_RISCV_IMSIC_PCI +/* Create PCI MSI domain */ + priv->pci_domain =pci_msi_create_irq_domain (fwnode, + &imsic_pci_domain_info, + priv->base_domain); +if (!priv->pci_domain) { +pr_err ("Failed to create IMSIC PCI domain\n" ); +irq_domain_remove (priv->base_domain); +return -ENOMEM ; + } +#endif + +/* Create Platform MSI domain */ + priv->plat_domain =platform_msi_create_irq_domain (fwnode, + &imsic_plat_domain_info, + priv->base_domain); +if (!priv->plat_domain) { +pr_err ("Failed to create IMSIC platform domain\n" ); +if (priv->pci_domain) +irq_domain_remove (priv->pci_domain); +irq_domain_remove (priv->base_domain); +return -ENOMEM ; + } + +return 0 ; +} + +/* +* To handle an interrupt, we read the TOPEI CSR and write zero in one +* instruction. If TOPEI CSR is non-zero then we translate TOPEI.ID to +* Linux interrupt number and let Linux IRQ subsystem handle it. +*/ +static void imsic_handle_irq (struct irq_desc *desc) +{ +struct imsic_handler *handler =this_cpu_ptr (&imsic_handlers); +struct irq_chip *chip =irq_desc_get_chip (desc); +struct imsic_priv *priv = handler->priv; +irq_hw_number_t hwirq; +int err; + +WARN_ON_ONCE (!handler->priv); + +chained_irq_enter (chip, desc); + +while ((hwirq =csr_swap (CSR_TOPEI ,0 ))) { + hwirq = hwirq >>TOPEI_ID_SHIFT ; + +if (hwirq == priv->ipi_id) { +#ifdef CONFIG_SMP +ipi_mux_process (); +#endif +continue ; + }else if (hwirq == priv->ipi_lsync_id) { +imsic_ids_local_sync (priv); +continue ; + } + + err =generic_handle_domain_irq (priv->base_domain, hwirq); +if (unlikely (err)) +pr_warn_ratelimited ( +"hwirq %lu mapping not found\n" , hwirq); + } + +chained_irq_exit (chip, desc); +} + +static int imsic_dying_cpu (unsigned int cpu) +{ +struct imsic_handler *handler =this_cpu_ptr (&imsic_handlers); +struct imsic_priv *priv = handler->priv; + +/* Disable per-CPU parent interrupt */ +if (imsic_parent_irq) +disable_percpu_irq (imsic_parent_irq); + +/* Locally disable interrupt delivery */ +imsic_ids_local_delivery (priv, false); + +/* Disable IPIs */ +imsic_ipi_disable (priv); + +return 0 ; +} + +static int imsic_starting_cpu (unsigned int cpu) +{ +struct imsic_handler *handler =this_cpu_ptr (&imsic_handlers); +struct imsic_priv *priv = handler->priv; + +/* Enable per-CPU parent interrupt */ +if (imsic_parent_irq) +enable_percpu_irq (imsic_parent_irq, +irq_get_trigger_type (imsic_parent_irq)); +else +pr_warn ("cpu%d: parent irq not available\n" , cpu); + +/* Enable IPIs */ +imsic_ipi_enable (priv); + +/* +* Interrupts identities might have been enabled/disabled while +* this CPU was not running so sync-up local enable/disable state. +*/ +imsic_ids_local_sync (priv); + +/* Locally enable interrupt delivery */ +imsic_ids_local_delivery (priv, true); + +return 0 ; +} + +struct imsic_fwnode_ops { +u32 (*nr_parent_irq)(struct fwnode_handle *fwnode, +void *fwopaque); +int (*parent_hartid)(struct fwnode_handle *fwnode, +void *fwopaque,u32 index, +unsigned long *out_hartid); +u32 (*nr_mmio)(struct fwnode_handle *fwnode,void *fwopaque); +int (*mmio_to_resource)(struct fwnode_handle *fwnode, +void *fwopaque,u32 index, +struct resource *res); +void __iomem *(*mmio_map)(struct fwnode_handle *fwnode, +void *fwopaque,u32 index); +int (*read_u32)(struct fwnode_handle *fwnode, +void *fwopaque,const char *prop,u32 *out_val); +bool (*read_bool)(struct fwnode_handle *fwnode, +void *fwopaque,const char *prop); +}; + +static int __init imsic_init (struct imsic_fwnode_ops *fwops, +struct fwnode_handle *fwnode, +void *fwopaque) +{ +struct resource res; +phys_addr_t base_addr; +int rc, nr_parent_irqs; +struct imsic_mmio *mmio; +struct imsic_priv *priv; +struct irq_domain *domain; +struct imsic_handler *handler; +struct imsic_global_config *global; +u32 i, tmp, nr_handlers =0 ; + +if (imsic_init_done) { +pr_err ("%pfwP: already initialized hence ignoring\n" , + fwnode); +return -ENODEV ; + } + +if (!riscv_isa_extension_available (NULL , SxAIA)) { +pr_err ("%pfwP: AIA support not available\n" , fwnode); +return -ENODEV ; + } + + priv =kzalloc (sizeof (*priv),GFP_KERNEL ); +if (!priv) +return -ENOMEM ; + global = &priv->global; + +/* Find number of parent interrupts */ + nr_parent_irqs = fwops->nr_parent_irq (fwnode, fwopaque); +if (!nr_parent_irqs) { +pr_err ("%pfwP: no parent irqs available\n" , fwnode); +return -EINVAL ; + } + +/* Find number of guest index bits in MSI address */ + rc = fwops->read_u32 (fwnode, fwopaque,"riscv,guest-index-bits" , + &global->guest_index_bits); +if (rc) + global->guest_index_bits =0 ; + tmp =BITS_PER_LONG -IMSIC_MMIO_PAGE_SHIFT ; +if (tmp < global->guest_index_bits) { +pr_err ("%pfwP: guest index bits too big\n" , fwnode); +return -EINVAL ; + } + +/* Find number of HART index bits */ + rc = fwops->read_u32 (fwnode, fwopaque,"riscv,hart-index-bits" , + &global->hart_index_bits); +if (rc) { +/* Assume default value */ + global->hart_index_bits =__fls (nr_parent_irqs); +if (BIT (global->hart_index_bits) < nr_parent_irqs) + global->hart_index_bits++; + } + tmp =BITS_PER_LONG -IMSIC_MMIO_PAGE_SHIFT - + global->guest_index_bits; +if (tmp < global->hart_index_bits) { +pr_err ("%pfwP: HART index bits too big\n" , fwnode); +return -EINVAL ; + } + +/* Find number of group index bits */ + rc = fwops->read_u32 (fwnode, fwopaque,"riscv,group-index-bits" , + &global->group_index_bits); +if (rc) + global->group_index_bits =0 ; + tmp =BITS_PER_LONG -IMSIC_MMIO_PAGE_SHIFT - + global->guest_index_bits - global->hart_index_bits; +if (tmp < global->group_index_bits) { +pr_err ("%pfwP: group index bits too big\n" , fwnode); +return -EINVAL ; + } + +/* Find first bit position of group index */ + tmp =IMSIC_MMIO_PAGE_SHIFT *2 ; + rc = fwops->read_u32 (fwnode, fwopaque,"riscv,group-index-shift" , + &global->group_index_shift); +if (rc) + global->group_index_shift = tmp; +if (global->group_index_shift < tmp) { +pr_err ("%pfwP: group index shift too small\n" , fwnode); +return -EINVAL ; + } + tmp = global->group_index_bits + global->group_index_shift -1 ; +if (tmp >=BITS_PER_LONG ) { +pr_err ("%pfwP: group index shift too big\n" , fwnode); +return -EINVAL ; + } + +/* Find number of interrupt identities */ + rc = fwops->read_u32 (fwnode, fwopaque,"riscv,num-ids" , + &global->nr_ids); +if (rc) { +pr_err ("%pfwP: number of interrupt identities not found\n" , + fwnode); +return rc; + } +if ((global->nr_ids <IMSIC_MIN_ID ) || + (global->nr_ids >=IMSIC_MAX_ID ) || + ((global->nr_ids &IMSIC_MIN_ID ) !=IMSIC_MIN_ID )) { +pr_err ("%pfwP: invalid number of interrupt identities\n" , + fwnode); +return -EINVAL ; + } + +/* Find number of guest interrupt identities */ +if (fwops->read_u32 (fwnode, fwopaque,"riscv,num-guest-ids" , + &global->nr_guest_ids)) + global->nr_guest_ids = global->nr_ids; +if ((global->nr_guest_ids <IMSIC_MIN_ID ) || + (global->nr_guest_ids >=IMSIC_MAX_ID ) || + ((global->nr_guest_ids &IMSIC_MIN_ID ) !=IMSIC_MIN_ID )) { +pr_err ("%pfwP: invalid number of guest interrupt identities\n" , + fwnode); +return -EINVAL ; + } + +/* Check if IPIs are slow */ + priv->slow_ipi = fwops->read_bool (fwnode, fwopaque,"riscv,slow-ipi" ); + +/* Compute base address */ + rc = fwops->mmio_to_resource (fwnode, fwopaque,0 , &res); +if (rc) { +pr_err ("%pfwP: first MMIO resource not found\n" , fwnode); +return -EINVAL ; + } + global->base_addr = res.start; + global->base_addr &= ~(BIT (global->guest_index_bits + + global->hart_index_bits + +IMSIC_MMIO_PAGE_SHIFT ) -1 ); + global->base_addr &= ~((BIT (global->group_index_bits) -1 ) << + global->group_index_shift); + +/* Find number of MMIO register sets */ + priv->num_mmios = fwops->nr_mmio (fwnode, fwopaque); + +/* Allocate MMIO register sets */ + priv->mmios =kcalloc (priv->num_mmios,sizeof (*mmio),GFP_KERNEL ); +if (!priv->mmios) { + rc = -ENOMEM ; + goto out_free_priv; + } + +/* Parse and map MMIO register sets */ +for (i =0 ; i < priv->num_mmios; i++) { + mmio = &priv->mmios[i]; + rc = fwops->mmio_to_resource (fwnode, fwopaque, i, &res); +if (rc) { +pr_err ("%pfwP: unable to parse MMIO regset %d\n" , + fwnode, i); + goto out_iounmap; + } + mmio->pa = res.start; + mmio->size = res.end - res.start +1 ; + + base_addr = mmio->pa; + base_addr &= ~(BIT (global->guest_index_bits + + global->hart_index_bits + +IMSIC_MMIO_PAGE_SHIFT ) -1 ); + base_addr &= ~((BIT (global->group_index_bits) -1 ) << + global->group_index_shift); +if (base_addr != global->base_addr) { + rc = -EINVAL ; +pr_err ("%pfwP: address mismatch for regset %d\n" , + fwnode, i); + goto out_iounmap; + } + + tmp =BIT (global->guest_index_bits) -1 ; +if ((mmio->size /IMSIC_MMIO_PAGE_SZ ) & tmp) { + rc = -EINVAL ; +pr_err ("%pfwP: size mismatch for regset %d\n" , + fwnode, i); + goto out_iounmap; + } + + mmio->va = fwops->mmio_map (fwnode, fwopaque, i); +if (!mmio->va) { + rc = -EIO ; +pr_err ("%pfwP: unable to map MMIO regset %d\n" , + fwnode, i); + goto out_iounmap; + } + } + +/* Initialize interrupt identity management */ + rc =imsic_ids_init (priv); +if (rc) { +pr_err ("%pfwP: failed to initialize interrupt management\n" , + fwnode); + goto out_iounmap; + } + +/* Configure handlers for target CPUs */ +for (i =0 ; i < nr_parent_irqs; i++) { +unsigned long reloff, hartid; +int j, cpu; + + rc = fwops->parent_hartid (fwnode, fwopaque, i, &hartid); +if (rc) { +pr_warn ("%pfwP: hart ID for parent irq%d not found\n" , + fwnode, i); +continue ; + } + + cpu =riscv_hartid_to_cpuid (hartid); +if (cpu <0 ) { +pr_warn ("%pfwP: invalid cpuid for parent irq%d\n" , + fwnode, i); +continue ; + } + +/* Find MMIO location of MSI page */ + mmio =NULL ; + reloff = i *BIT (global->guest_index_bits) * +IMSIC_MMIO_PAGE_SZ ; +for (j =0 ; priv->num_mmios; j++) { +if (reloff < priv->mmios[j].size) { + mmio = &priv->mmios[j]; +break ; + } + + reloff -= priv->mmios[j].size; + } +if (!mmio) { +pr_warn ("%pfwP: MMIO not found for parent irq%d\n" , + fwnode, i); +continue ; + } + + handler =per_cpu_ptr (&imsic_handlers, cpu); +if (handler->priv) { +pr_warn ("%pfwP: CPU%d handler already configured.\n" , + fwnode, cpu); + goto done; + } + +cpumask_set_cpu (cpu, &priv->lmask); + handler->local.msi_pa = mmio->pa + reloff; + handler->local.msi_va = mmio->va + reloff; + handler->priv = priv; + +done: + nr_handlers++; + } + +/* If no CPU handlers found then can't take interrupts */ +if (!nr_handlers) { +pr_err ("%pfwP: No CPU handlers found\n" , fwnode); + rc = -ENODEV ; + goto out_ids_cleanup; + } + +/* Find parent domain and register chained handler */ + domain =irq_find_matching_fwnode (riscv_get_intc_hwnode (), +DOMAIN_BUS_ANY ); +if (!domain) { +pr_err ("%pfwP: Failed to find INTC domain\n" , fwnode); + rc = -ENOENT ; + goto out_ids_cleanup; + } + imsic_parent_irq =irq_create_mapping (domain,RV_IRQ_EXT ); +if (!imsic_parent_irq) { +pr_err ("%pfwP: Failed to create INTC mapping\n" , fwnode); + rc = -ENOENT ; + goto out_ids_cleanup; + } +irq_set_chained_handler (imsic_parent_irq, imsic_handle_irq); + +/* Initialize IPI domain */ + rc =imsic_ipi_domain_init (priv); +if (rc) { +pr_err ("%pfwP: Failed to initialize IPI domain\n" , fwnode); + goto out_ids_cleanup; + } + +/* Initialize IRQ and MSI domains */ + rc =imsic_irq_domains_init (priv, fwnode); +if (rc) { +pr_err ("%pfwP: Failed to initialize IRQ and MSI domains\n" , + fwnode); + goto out_ipi_domain_cleanup; + } + +/* Setup cpuhp state */ +cpuhp_setup_state (CPUHP_AP_ONLINE_DYN , +"irqchip/riscv/imsic:starting" , + imsic_starting_cpu, imsic_dying_cpu); + +/* +* Only one IMSIC instance allowed in a platform for clean +* implementation of SMP IRQ affinity and per-CPU IPIs. +* +* This means on a multi-socket (or multi-die) platform we +* will have multiple MMIO regions for one IMSIC instance. +*/ + imsic_init_done = true; + +pr_info ("%pfwP: hart-index-bits: %d, guest-index-bits: %d\n" , + fwnode, global->hart_index_bits, global->guest_index_bits); +pr_info ("%pfwP: group-index-bits: %d, group-index-shift: %d\n" , + fwnode, global->group_index_bits, global->group_index_shift); +pr_info ("%pfwP: mapped %d interrupts for %d CPUs at %pa\n" , + fwnode, global->nr_ids, nr_handlers, &global->base_addr); +if (priv->ipi_lsync_id) +pr_info ("%pfwP: enable/disable sync using interrupt %d\n" , + fwnode, priv->ipi_lsync_id); +if (priv->ipi_id) +pr_info ("%pfwP: providing IPIs using interrupt %d\n" , + fwnode, priv->ipi_id); + +return 0 ; + +out_ipi_domain_cleanup: +imsic_ipi_domain_cleanup (priv); +out_ids_cleanup: +imsic_ids_cleanup (priv); +out_iounmap: +for (i =0 ; i < priv->num_mmios; i++) { +if (priv->mmios[i].va) +iounmap (priv->mmios[i].va); + } +kfree (priv->mmios); +out_free_priv: +kfree (priv); +return rc; +} + +static u32 __init imsic_dt_nr_parent_irq (struct fwnode_handle *fwnode, +void *fwopaque) +{ +return of_irq_count (to_of_node (fwnode)); +} + +static int __init imsic_dt_parent_hartid (struct fwnode_handle *fwnode, +void *fwopaque,u32 index, +unsigned long *out_hartid) +{ +struct of_phandle_args parent; +int rc; + + rc =of_irq_parse_one (to_of_node (fwnode), index, &parent); +if (rc) +return rc; + +/* +* Skip interrupts other than external interrupts for +* current privilege level. +*/ +if (parent.args[0 ] !=RV_IRQ_EXT ) +return -EINVAL ; + +return riscv_of_parent_hartid (parent.np, out_hartid); +} + +static u32 __init imsic_dt_nr_mmio (struct fwnode_handle *fwnode, +void *fwopaque) +{ +u32 ret =0 ; +struct resource res; + +while (!of_address_to_resource (to_of_node (fwnode), ret, &res)) + ret++; + +return ret; +} + +static int __init imsic_mmio_to_resource (struct fwnode_handle *fwnode, +void *fwopaque,u32 index, +struct resource *res) +{ +return of_address_to_resource (to_of_node (fwnode), index, res); +} + +static void __iomem __init *imsic_dt_mmio_map (struct fwnode_handle *fwnode, +void *fwopaque,u32 index) +{ +return of_iomap (to_of_node (fwnode), index); +} + +static int __init imsic_dt_read_u32 (struct fwnode_handle *fwnode, +void *fwopaque,const char *prop, +u32 *out_val) +{ +return of_property_read_u32 (to_of_node (fwnode), prop, out_val); +} + +static bool __init imsic_dt_read_bool (struct fwnode_handle *fwnode, +void *fwopaque,const char *prop) +{ +return of_property_read_bool (to_of_node (fwnode), prop); +} + +static int __init imsic_dt_init (struct device_node *node, +struct device_node *parent) +{ +struct imsic_fwnode_ops ops = { + .nr_parent_irq = imsic_dt_nr_parent_irq, + .parent_hartid = imsic_dt_parent_hartid, + .nr_mmio = imsic_dt_nr_mmio, + .mmio_to_resource = imsic_mmio_to_resource, + .mmio_map = imsic_dt_mmio_map, + .read_u32 = imsic_dt_read_u32, + .read_bool = imsic_dt_read_bool, + }; + +return imsic_init (&ops, &node->fwnode,NULL ); +} +IRQCHIP_DECLARE (riscv_imsic,"riscv,imsics" , imsic_dt_init);include/linux/irqchip/riscv-imsic.h new file +92
-1@@ -0,0 +1,92 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* +* Copyright (C) 2021 Western Digital Corporation or its affiliates. +* Copyright (C) 2022 Ventana Micro Systems Inc. +*/ +#ifndef __LINUX_IRQCHIP_RISCV_IMSIC_H +#define __LINUX_IRQCHIP_RISCV_IMSIC_H + +#include <linux/types.h> +#include <asm/csr.h> + +#define IMSIC_MMIO_PAGE_SHIFT 12 +#define IMSIC_MMIO_PAGE_SZ (1UL << IMSIC_MMIO_PAGE_SHIFT) +#define IMSIC_MMIO_PAGE_LE 0x00 +#define IMSIC_MMIO_PAGE_BE 0x04 + +#define IMSIC_MIN_ID 63 +#define IMSIC_MAX_ID 2048 + +#define IMSIC_EIDELIVERY 0x70 + +#define IMSIC_EITHRESHOLD 0x72 + +#define IMSIC_EIP0 0x80 +#define IMSIC_EIP63 0xbf +#define IMSIC_EIPx_BITS 32 + +#define IMSIC_EIE0 0xc0 +#define IMSIC_EIE63 0xff +#define IMSIC_EIEx_BITS 32 + +#define IMSIC_FIRST IMSIC_EIDELIVERY +#define IMSIC_LAST IMSIC_EIE63 + +#define IMSIC_MMIO_SETIPNUM_LE 0x00 +#define IMSIC_MMIO_SETIPNUM_BE 0x04 + +struct imsic_global_config { +/* +* MSI Target Address Scheme +* +* XLEN-1 12 0 +* | | | +* ------------------------------------------------------------- +* |xxxxxx|Group Index|xxxxxxxxxxx|HART Index|Guest Index| 0 | +* ------------------------------------------------------------- +*/ + +/* Bits representing Guest index, HART index, and Group index */ +u32 guest_index_bits; +u32 hart_index_bits; +u32 group_index_bits; +u32 group_index_shift; + +/* Global base address matching all target MSI addresses */ +phys_addr_t base_addr; + +/* Number of interrupt identities */ +u32 nr_ids; + +/* Number of guest interrupt identities */ +u32 nr_guest_ids; +}; + +struct imsic_local_config { +phys_addr_t msi_pa; +void __iomem *msi_va; +}; + +#ifdef CONFIG_RISCV_IMSIC + +extern const struct imsic_global_config *imsic_get_global_config (void ); + +extern const struct imsic_local_config *imsic_get_local_config ( +unsigned int cpu); + +#else + +static inline const struct imsic_global_config *imsic_get_global_config (void ) +{ +return NULL ; +} + +static inline const struct imsic_local_config *imsic_get_local_config ( +unsigned int cpu) +{ +return NULL ; +} + +#endif + +#endif --2.34.1
Re: [PATCH 5/9] irqchip: Add RISC-V incoming MSI controller driver
In reply to Anup PatelQuoted 881 lines · Anup Patel
The RISC-V advanced interrupt architecture (AIA) specification defines a new MSI controller for managing MSIs on a RISC-V platform. This new MSI controller is referred to as incoming message signaled interrupt controller (IMSIC) which manages MSI on per-HART (or per-CPU) basis. (For more details refer https://github.com/riscv/riscv-aia)
This patch adds an irqchip driver for RISC-V IMSIC found on RISC-V platforms.
Signed-off-by Anup Patel <[email protected]>--- drivers/irqchip/Kconfig | 20 +- drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-riscv-imsic.c | 1207 +++++++++++++++++++++++++++ include/linux/irqchip/riscv-imsic.h | 92 ++ 4 files changed, 1319 insertions(+), 1 deletion(-) create mode 100644 drivers/irqchip/irq-riscv-imsic.c create mode 100644 include/linux/irqchip/riscv-imsic.hdrivers/irqchip/Kconfig +19
-1@@ -29,7 +29,6 @@ config ARM_GIC_V2M config GIC_NON_BANKED bool - config ARM_GIC_V3 bool select IRQ_DOMAIN_HIERARCHY@@ -564,6 +563,25 @@ config SIFIVE_PLIC If you don't know what to do here, say Y. +config RISCV_IMSIC + bool "RISC-V Incoming MSI Controller" + depends on RISCV + select IRQ_DOMAIN_HIERARCHY + select GENERIC_MSI_IRQ_DOMAIN + help + This enables support for the IMSIC chip found in RISC-V systems. + The IMSIC controls message signaled interrupts and forwards them + to each core as wired local interrupt. + + If you don't know what to do here, say Y. + +config RISCV_IMSIC_PCI + bool + depends on RISCV_IMSIC + depends on PCI + depends on PCI_MSI + default RISCV_IMSIC + config EXYNOS_IRQ_COMBINER bool "Samsung Exynos IRQ combiner support" if COMPILE_TEST depends on (ARCH_EXYNOS && ARM) || COMPILE_TESTdrivers/irqchip/Makefile +1
-0@@ -96,6 +96,7 @@ obj-$(CONFIG_QCOM_MPM) += irq-qcom-mpm.o obj-$(CONFIG_CSKY_MPINTC) += irq-csky-mpintc.o obj-$(CONFIG_CSKY_APB_INTC) += irq-csky-apb-intc.o obj-$(CONFIG_RISCV_INTC) += irq-riscv-intc.o +obj-$(CONFIG_RISCV_IMSIC) += irq-riscv-imsic.o obj-$(CONFIG_SIFIVE_PLIC) += irq-sifive-plic.o obj-$(CONFIG_IMX_IRQSTEER) += irq-imx-irqsteer.o obj-$(CONFIG_IMX_INTMUX) += irq-imx-intmux.odrivers/irqchip/irq-riscv-imsic.c new file +806
-0@@ -0,0 +1,1207 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Copyright (C) 2021 Western Digital Corporation or its affiliates. +* Copyright (C) 2022 Ventana Micro Systems Inc. +*/ + +#define pr_fmt (fmt) "riscv-imsic: " fmt +#include <linux/bitmap.h> +#include <linux/cpu.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/iommu.h> +#include <linux/irq.h> +#include <linux/irqchip.h> +#include <linux/irqchip/chained_irq.h> +#include <linux/irqchip/riscv-imsic.h> +#include <linux/irqdomain.h> +#include <linux/module.h> +#include <linux/msi.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/pci.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> +#include <linux/smp.h> +#include <asm/hwcap.h> + +#define IMSIC_DISABLE_EIDELIVERY 0 +#define IMSIC_ENABLE_EIDELIVERY 1 +#define IMSIC_DISABLE_EITHRESHOLD 1 +#define IMSIC_ENABLE_EITHRESHOLD 0 + +#define imsic_csr_write (__c, __v) \ +do { \ + csr_write(CSR_ISELECT, __c); \ + csr_write(CSR_IREG, __v); \ +} while (0) + +#define imsic_csr_read (__c) \ +({ \ + unsigned long __v; \ + csr_write(CSR_ISELECT, __c); \ + __v = csr_read(CSR_IREG); \ + __v; \ +}) + +#define imsic_csr_set (__c, __v) \ +do { \ + csr_write(CSR_ISELECT, __c); \ + csr_set(CSR_IREG, __v); \ +} while (0) + +#define imsic_csr_clear (__c, __v) \ +do { \ + csr_write(CSR_ISELECT, __c); \ + csr_clear(CSR_IREG, __v); \ +} while (0) + +struct imsic_mmio { +phys_addr_t pa; +void __iomem *va; +unsigned long size; +}; + +struct imsic_priv { +/* Global configuration common for all HARTs */ +struct imsic_global_config global; + +/* MMIO regions */ +u32 num_mmios; +struct imsic_mmio *mmios; + +/* Global state of interrupt identities */ +raw_spinlock_t ids_lock; +unsigned long *ids_used_bimap; +unsigned long *ids_enabled_bimap; +unsigned int *ids_target_cpu; + +/* Mask for connected CPUs */ +struct cpumask lmask; + +/* IPI interrupt identity */ +bool slow_ipi; +u32 ipi_id; +u32 ipi_lsync_id; + +/* IRQ domains */ +struct irq_domain *base_domain; +struct irq_domain *pci_domain; +struct irq_domain *plat_domain; +}; + +struct imsic_handler { +/* Local configuration for given HART */ +struct imsic_local_config local; + +/* Pointer to private context */ +struct imsic_priv *priv; +}; + +static bool imsic_init_done; + +static int imsic_parent_irq; +static DEFINE_PER_CPU(struct imsic_handler, imsic_handlers); + +const struct imsic_global_config *imsic_get_global_config (void ) +{ +struct imsic_handler *handler =this_cpu_ptr (&imsic_handlers); + +if (!handler || !handler->priv) +return NULL ; + +return &handler->priv->global; +} +EXPORT_SYMBOL_GPL (imsic_get_global_config); + +const struct imsic_local_config *imsic_get_local_config (unsigned int cpu) +{ +struct imsic_handler *handler =per_cpu_ptr (&imsic_handlers, cpu); + +if (!handler || !handler->priv) +return NULL ; + +return &handler->local; +} +EXPORT_SYMBOL_GPL (imsic_get_local_config); + +static int imsic_cpu_page_phys (unsigned int cpu, +unsigned int guest_index, +phys_addr_t *out_msi_pa) +{ +struct imsic_handler *handler =per_cpu_ptr (&imsic_handlers, cpu); +struct imsic_global_config *global; +struct imsic_local_config *local; + +if (!handler || !handler->priv) +return -ENODEV ; + local = &handler->local; + global = &handler->priv->global; + +if (BIT (global->guest_index_bits) <= guest_index) +return -EINVAL ; + +if (out_msi_pa) + *out_msi_pa = local->msi_pa + + (guest_index *IMSIC_MMIO_PAGE_SZ ); + +return 0 ; +} + +static int imsic_get_cpu (struct imsic_priv *priv, +const struct cpumask *mask_val,bool force, +unsigned int *out_target_cpu) +{ +struct cpumask amask; +unsigned int cpu; + +cpumask_and (&amask, &priv->lmask, mask_val); + +if (force) + cpu =cpumask_first (&amask); +else + cpu =cpumask_any_and (&amask, cpu_online_mask); + +if (cpu >= nr_cpu_ids) +return -EINVAL ; + +if (out_target_cpu) + *out_target_cpu = cpu; + +return 0 ; +} + +static int imsic_get_cpu_msi_msg (unsigned int cpu,unsigned int id, +struct msi_msg *msg) +{ +phys_addr_t msi_addr; +int err; + + err =imsic_cpu_page_phys (cpu,0 , &msi_addr); +if (err) +return err; + + msg->address_hi =upper_32_bits (msi_addr); + msg->address_lo =lower_32_bits (msi_addr); + msg->data = id; + +return err; +} + +static void imsic_id_set_target (struct imsic_priv *priv, +unsigned int id,unsigned int target_cpu) +{ +raw_spin_lock (&priv->ids_lock); + priv->ids_target_cpu[id] = target_cpu; +raw_spin_unlock (&priv->ids_lock); +} + +static unsigned int imsic_id_get_target (struct imsic_priv *priv, +unsigned int id) +{ +unsigned int ret; + +raw_spin_lock (&priv->ids_lock); + ret = priv->ids_target_cpu[id]; +raw_spin_unlock (&priv->ids_lock); + +return ret; +} + +static void __imsic_eix_update (unsigned long base_id, +unsigned long num_id,bool pend,bool val) +{ +unsigned long i, isel, ireg, flags; +unsigned long id = base_id, last_id = base_id + num_id; + +while (id < last_id) { + isel = id /BITS_PER_LONG ; + isel *=BITS_PER_LONG / IMSIC_EIPx_BITS; + isel += (pend) ?IMSIC_EIP0 :IMSIC_EIE0 ; + + ireg =0 ; +for (i = id & (__riscv_xlen -1 ); + (id < last_id) && (i < __riscv_xlen); i++) { + ireg |=BIT (i); + id++; + } + +/* +* The IMSIC EIEx and EIPx registers are indirectly +* accessed via using ISELECT and IREG CSRs so we +* save/restore local IRQ to ensure that we don't +* get preempted while accessing IMSIC registers. +*/ +local_irq_save (flags); +if (val) +imsic_csr_set (isel, ireg); +else +imsic_csr_clear (isel, ireg); +local_irq_restore (flags); + } +} + +#define __imsic_id_enable (__id) \ + __imsic_eix_update((__id), 1, false, true) +#define __imsic_id_disable (__id) \ + __imsic_eix_update((__id), 1, false, false) + +#ifdef CONFIG_SMP +static void __imsic_id_smp_sync (struct imsic_priv *priv) +{ +struct imsic_handler *handler; +struct cpumask amask; +int cpu; + +cpumask_and (&amask, &priv->lmask, cpu_online_mask); +for_each_cpu (cpu, &amask) { +if (cpu ==smp_processor_id ()) +continue ; + + handler =per_cpu_ptr (&imsic_handlers, cpu); +if (!handler || !handler->priv || !handler->local.msi_va) { +pr_warn ("CPU%d: handler not initialized\n" , cpu); +continue ; + } + +writel (handler->priv->ipi_lsync_id, handler->local.msi_va); + } +} +#else +#define __imsic_id_smp_sync (__priv) +#endif + +static void imsic_id_enable (struct imsic_priv *priv,unsigned int id) +{ +raw_spin_lock (&priv->ids_lock); +bitmap_set (priv->ids_enabled_bimap, id,1 ); +__imsic_id_enable (id); +raw_spin_unlock (&priv->ids_lock); + +__imsic_id_smp_sync (priv); +} + +static void imsic_id_disable (struct imsic_priv *priv,unsigned int id) +{ +raw_spin_lock (&priv->ids_lock); +bitmap_clear (priv->ids_enabled_bimap, id,1 ); +__imsic_id_disable (id); +raw_spin_unlock (&priv->ids_lock); + +__imsic_id_smp_sync (priv); +} + +static void imsic_ids_local_sync (struct imsic_priv *priv) +{ +int i; + +raw_spin_lock (&priv->ids_lock); +for (i =1 ; i <= priv->global.nr_ids; i++) { +if (priv->ipi_id == i || priv->ipi_lsync_id == i) +continue ; + +if (test_bit (i, priv->ids_enabled_bimap)) +__imsic_id_enable (i); +else +__imsic_id_disable (i); + } +raw_spin_unlock (&priv->ids_lock); +} + +static void imsic_ids_local_delivery (struct imsic_priv *priv,bool enable) +{ +if (enable) { +imsic_csr_write (IMSIC_EITHRESHOLD ,IMSIC_ENABLE_EITHRESHOLD ); +imsic_csr_write (IMSIC_EIDELIVERY ,IMSIC_ENABLE_EIDELIVERY ); + }else { +imsic_csr_write (IMSIC_EIDELIVERY ,IMSIC_DISABLE_EIDELIVERY ); +imsic_csr_write (IMSIC_EITHRESHOLD ,IMSIC_DISABLE_EITHRESHOLD ); + } +} + +static int imsic_ids_alloc (struct imsic_priv *priv, +unsigned int max_id,unsigned int order) +{ +int ret; + +if ((priv->global.nr_ids < max_id) || + (max_id <BIT (order))) +return -EINVAL ; + +raw_spin_lock (&priv->ids_lock); + ret =bitmap_find_free_region (priv->ids_used_bimap, + max_id +1 , order); +raw_spin_unlock (&priv->ids_lock); + +return ret; +} + +static void imsic_ids_free (struct imsic_priv *priv,unsigned int base_id, +unsigned int order) +{ +raw_spin_lock (&priv->ids_lock); +bitmap_release_region (priv->ids_used_bimap, base_id, order); +raw_spin_unlock (&priv->ids_lock); +} + +static int __init imsic_ids_init (struct imsic_priv *priv) +{ +int i; +struct imsic_global_config *global = &priv->global; + +raw_spin_lock_init (&priv->ids_lock); + +/* Allocate used bitmap */ + priv->ids_used_bimap =kcalloc (BITS_TO_LONGS (global->nr_ids +1 ), +sizeof (unsigned long ),GFP_KERNEL ); +if (!priv->ids_used_bimap) +return -ENOMEM ; + +/* Allocate enabled bitmap */ + priv->ids_enabled_bimap =kcalloc (BITS_TO_LONGS (global->nr_ids +1 ), +sizeof (unsigned long ),GFP_KERNEL ); +if (!priv->ids_enabled_bimap) { +kfree (priv->ids_used_bimap); +return -ENOMEM ; + } + +/* Allocate target CPU array */ + priv->ids_target_cpu =kcalloc (global->nr_ids +1 , +sizeof (unsigned int ),GFP_KERNEL ); +if (!priv->ids_target_cpu) { +kfree (priv->ids_enabled_bimap); +kfree (priv->ids_used_bimap); +return -ENOMEM ; + } +for (i =0 ; i <= global->nr_ids; i++) + priv->ids_target_cpu[i] =UINT_MAX ; + +/* Reserve ID#0 because it is special and never implemented */ +bitmap_set (priv->ids_used_bimap,0 ,1 ); + +return 0 ; +} + +static void __init imsic_ids_cleanup (struct imsic_priv *priv) +{ +kfree (priv->ids_target_cpu); +kfree (priv->ids_enabled_bimap); +kfree (priv->ids_used_bimap); +} + +#ifdef CONFIG_SMP +static void imsic_ipi_send_mask (unsigned int parent_virq,void *data, +const struct cpumask *mask) +{ +int cpu; +struct imsic_handler *handler; + +for_each_cpu (cpu, mask) { + handler =per_cpu_ptr (&imsic_handlers, cpu); +if (!handler || !handler->priv || !handler->local.msi_va) { +pr_warn ("CPU%d: handler not initialized\n" , cpu); +continue ; + } + +writel (handler->priv->ipi_id, handler->local.msi_va); + } +} + +static struct ipi_mux_ops imsic_ipi_ops = { + .ipi_mux_send = imsic_ipi_send_mask, +}; + +static void imsic_ipi_enable (struct imsic_priv *priv) +{ +__imsic_id_enable (priv->ipi_id); +__imsic_id_enable (priv->ipi_lsync_id); +} + +static void imsic_ipi_disable (struct imsic_priv *priv) +{ +__imsic_id_disable (priv->ipi_lsync_id); +__imsic_id_disable (priv->ipi_id); +} + +static int __init imsic_ipi_domain_init (struct imsic_priv *priv) +{ +int virq; + +/* Skip IPI setup if IPIs are slow */ +if (priv->slow_ipi) + goto skip_ipi; + +/* Allocate interrupt identity for IPIs */ + virq =imsic_ids_alloc (priv, priv->global.nr_ids,get_count_order (1 )); +if (virq <0 ) +return virq; + priv->ipi_id = virq; + +/* Create IMSIC IPI multiplexing */ + virq =ipi_mux_create (0 ,BITS_PER_BYTE , &imsic_ipi_ops,NULL ); +if (virq <=0 ) { +imsic_ids_free (priv, priv->ipi_id,get_count_order (1 )); +return (virq <0 ) ? virq : -ENOMEM ; + } + +/* Set vIRQ range */ +riscv_ipi_set_virq_range (virq,BITS_PER_BYTE , true); + +skip_ipi: +/* Allocate interrupt identity for local enable/disable sync */ + virq =imsic_ids_alloc (priv, priv->global.nr_ids,get_count_order (1 )); +if (virq <0 ) { +imsic_ids_free (priv, priv->ipi_id,get_count_order (1 )); +return virq; + } + priv->ipi_lsync_id = virq; + +return 0 ; +} + +static void __init imsic_ipi_domain_cleanup (struct imsic_priv *priv) +{ +imsic_ids_free (priv, priv->ipi_lsync_id,get_count_order (1 )); +if (priv->ipi_id) +imsic_ids_free (priv, priv->ipi_id,get_count_order (1 )); +} +#else +static void imsic_ipi_enable (struct imsic_priv *priv) +{ +} + +static void imsic_ipi_disable (struct imsic_priv *priv) +{ +} + +static int __init imsic_ipi_domain_init (struct imsic_priv *priv) +{ +/* Clear the IPI ids because we are not using IPIs */ + priv->ipi_id =0 ; + priv->ipi_lsync_id =0 ; +return 0 ; +} + +static void __init imsic_ipi_domain_cleanup (struct imsic_priv *priv) +{ +} +#endif + +static void imsic_irq_mask (struct irq_data *d) +{ +imsic_id_disable (irq_data_get_irq_chip_data (d), d->hwirq); +} + +static void imsic_irq_unmask (struct irq_data *d) +{ +imsic_id_enable (irq_data_get_irq_chip_data (d), d->hwirq); +} + +static void imsic_irq_compose_msi_msg (struct irq_data *d, +struct msi_msg *msg) +{ +struct imsic_priv *priv =irq_data_get_irq_chip_data (d); +unsigned int cpu; +int err; + + cpu =imsic_id_get_target (priv, d->hwirq); +WARN_ON (cpu ==UINT_MAX ); + + err =imsic_get_cpu_msi_msg (cpu, d->hwirq, msg); +WARN_ON (err); + +iommu_dma_compose_msi_msg (irq_data_get_msi_desc (d), msg); +} + +#ifdef CONFIG_SMP +static int imsic_irq_set_affinity (struct irq_data *d, +const struct cpumask *mask_val, +bool force) +{ +struct imsic_priv *priv =irq_data_get_irq_chip_data (d); +unsigned int target_cpu; +int rc; + + rc =imsic_get_cpu (priv, mask_val, force, &target_cpu); +if (rc) +return rc; + +imsic_id_set_target (priv, d->hwirq, target_cpu); +irq_data_update_effective_affinity (d,cpumask_of (target_cpu)); + +return IRQ_SET_MASK_OK ; +} +#endif + +static struct irq_chip imsic_irq_base_chip = { + .name ="RISC-V IMSIC-BASE" , + .irq_mask = imsic_irq_mask, + .irq_unmask = imsic_irq_unmask, +#ifdef CONFIG_SMP + .irq_set_affinity = imsic_irq_set_affinity, +#endif + .irq_compose_msi_msg = imsic_irq_compose_msi_msg, + .flags =IRQCHIP_SKIP_SET_WAKE | +IRQCHIP_MASK_ON_SUSPEND , +}; + +static int imsic_irq_domain_alloc (struct irq_domain *domain, +unsigned int virq, +unsigned int nr_irqs, +void *args) +{ +struct imsic_priv *priv = domain->host_data; +msi_alloc_info_t *info = args; +phys_addr_t msi_addr; +int i, hwirq, err =0 ; +unsigned int cpu; + + err =imsic_get_cpu (priv, &priv->lmask, false, &cpu); +if (err) +return err; + + err =imsic_cpu_page_phys (cpu,0 , &msi_addr); +if (err) +return err; + + hwirq =imsic_ids_alloc (priv, priv->global.nr_ids, +get_count_order (nr_irqs)); +if (hwirq <0 ) +return hwirq; + + err =iommu_dma_prepare_msi (info->desc, msi_addr); +if (err) + goto fail; + +for (i =0 ; i < nr_irqs; i++) { +imsic_id_set_target (priv, hwirq + i, cpu); +irq_domain_set_info (domain, virq + i, hwirq + i, + &imsic_irq_base_chip, priv, + handle_simple_irq,NULL ,NULL ); +irq_set_noprobe (virq + i); +irq_set_affinity (virq + i, &priv->lmask); + } + +return 0 ; + +fail: +imsic_ids_free (priv, hwirq,get_count_order (nr_irqs)); +return err; +} + +static void imsic_irq_domain_free (struct irq_domain *domain, +unsigned int virq, +unsigned int nr_irqs) +{ +struct irq_data *d =irq_domain_get_irq_data (domain, virq); +struct imsic_priv *priv = domain->host_data; + +imsic_ids_free (priv, d->hwirq,get_count_order (nr_irqs)); +irq_domain_free_irqs_parent (domain, virq, nr_irqs); +} + +static const struct irq_domain_ops imsic_base_domain_ops = { + .alloc = imsic_irq_domain_alloc, + .free = imsic_irq_domain_free, +}; + +#ifdef CONFIG_RISCV_IMSIC_PCI + +static void imsic_pci_mask_irq (struct irq_data *d) +{ +pci_msi_mask_irq (d); +irq_chip_mask_parent (d); +} + +static void imsic_pci_unmask_irq (struct irq_data *d) +{ +pci_msi_unmask_irq (d); +irq_chip_unmask_parent (d); +} + +static struct irq_chip imsic_pci_irq_chip = { + .name ="RISC-V IMSIC-PCI" , + .irq_mask = imsic_pci_mask_irq, + .irq_unmask = imsic_pci_unmask_irq, + .irq_eoi = irq_chip_eoi_parent, +}; + +static struct msi_domain_ops imsic_pci_domain_ops = { +}; + +static struct msi_domain_info imsic_pci_domain_info = { + .flags = (MSI_FLAG_USE_DEF_DOM_OPS |MSI_FLAG_USE_DEF_CHIP_OPS | +MSI_FLAG_PCI_MSIX |MSI_FLAG_MULTI_PCI_MSI ), + .ops = &imsic_pci_domain_ops, + .chip = &imsic_pci_irq_chip, +}; + +#endif + +static struct irq_chip imsic_plat_irq_chip = { + .name ="RISC-V IMSIC-PLAT" , +}; + +static struct msi_domain_ops imsic_plat_domain_ops = { +}; + +static struct msi_domain_info imsic_plat_domain_info = { + .flags = (MSI_FLAG_USE_DEF_DOM_OPS |MSI_FLAG_USE_DEF_CHIP_OPS ), + .ops = &imsic_plat_domain_ops, + .chip = &imsic_plat_irq_chip, +}; + +static int __init imsic_irq_domains_init (struct imsic_priv *priv, +struct fwnode_handle *fwnode) +{ +/* Create Base IRQ domain */ + priv->base_domain =irq_domain_create_tree (fwnode, + &imsic_base_domain_ops, priv); +if (!priv->base_domain) { +pr_err ("Failed to create IMSIC base domain\n" ); +return -ENOMEM ; + } +irq_domain_update_bus_token (priv->base_domain,DOMAIN_BUS_NEXUS ); + +#ifdef CONFIG_RISCV_IMSIC_PCI +/* Create PCI MSI domain */ + priv->pci_domain =pci_msi_create_irq_domain (fwnode, + &imsic_pci_domain_info, + priv->base_domain); +if (!priv->pci_domain) { +pr_err ("Failed to create IMSIC PCI domain\n" ); +irq_domain_remove (priv->base_domain); +return -ENOMEM ; + } +#endif + +/* Create Platform MSI domain */ + priv->plat_domain =platform_msi_create_irq_domain (fwnode, + &imsic_plat_domain_info, + priv->base_domain); +if (!priv->plat_domain) { +pr_err ("Failed to create IMSIC platform domain\n" ); +if (priv->pci_domain) +irq_domain_remove (priv->pci_domain); +irq_domain_remove (priv->base_domain); +return -ENOMEM ; + } + +return 0 ; +} + +/* +* To handle an interrupt, we read the TOPEI CSR and write zero in one +* instruction. If TOPEI CSR is non-zero then we translate TOPEI.ID to +* Linux interrupt number and let Linux IRQ subsystem handle it. +*/ +static void imsic_handle_irq (struct irq_desc *desc) +{ +struct imsic_handler *handler =this_cpu_ptr (&imsic_handlers); +struct irq_chip *chip =irq_desc_get_chip (desc); +struct imsic_priv *priv = handler->priv; +irq_hw_number_t hwirq; +int err; + +WARN_ON_ONCE (!handler->priv); + +chained_irq_enter (chip, desc); + +while ((hwirq =csr_swap (CSR_TOPEI ,0 ))) { + hwirq = hwirq >>TOPEI_ID_SHIFT ; + +if (hwirq == priv->ipi_id) { +#ifdef CONFIG_SMP +ipi_mux_process (); +#endif +continue ; + }else if (hwirq == priv->ipi_lsync_id) { +imsic_ids_local_sync (priv); +continue ; + } + + err =generic_handle_domain_irq (priv->base_domain, hwirq); +if (unlikely (err)) +pr_warn_ratelimited ( +"hwirq %lu mapping not found\n" , hwirq); + } + +chained_irq_exit (chip, desc); +} + +static int imsic_dying_cpu (unsigned int cpu) +{ +struct imsic_handler *handler =this_cpu_ptr (&imsic_handlers); +struct imsic_priv *priv = handler->priv; + +/* Disable per-CPU parent interrupt */ +if (imsic_parent_irq) +disable_percpu_irq (imsic_parent_irq); + +/* Locally disable interrupt delivery */ +imsic_ids_local_delivery (priv, false); + +/* Disable IPIs */ +imsic_ipi_disable (priv); + +return 0 ; +} + +static int imsic_starting_cpu (unsigned int cpu) +{ +struct imsic_handler *handler =this_cpu_ptr (&imsic_handlers); +struct imsic_priv *priv = handler->priv; + +/* Enable per-CPU parent interrupt */ +if (imsic_parent_irq) +enable_percpu_irq (imsic_parent_irq, +irq_get_trigger_type (imsic_parent_irq)); +else +pr_warn ("cpu%d: parent irq not available\n" , cpu); + +/* Enable IPIs */ +imsic_ipi_enable (priv); + +/* +* Interrupts identities might have been enabled/disabled while +* this CPU was not running so sync-up local enable/disable state. +*/ +imsic_ids_local_sync (priv); + +/* Locally enable interrupt delivery */ +imsic_ids_local_delivery (priv, true); + +return 0 ; +} + +struct imsic_fwnode_ops { +u32 (*nr_parent_irq)(struct fwnode_handle *fwnode, +void *fwopaque); +int (*parent_hartid)(struct fwnode_handle *fwnode, +void *fwopaque,u32 index, +unsigned long *out_hartid); +u32 (*nr_mmio)(struct fwnode_handle *fwnode,void *fwopaque); +int (*mmio_to_resource)(struct fwnode_handle *fwnode, +void *fwopaque,u32 index, +struct resource *res); +void __iomem *(*mmio_map)(struct fwnode_handle *fwnode, +void *fwopaque,u32 index); +int (*read_u32)(struct fwnode_handle *fwnode, +void *fwopaque,const char *prop,u32 *out_val); +bool (*read_bool)(struct fwnode_handle *fwnode, +void *fwopaque,const char *prop); +}; + +static int __init imsic_init (struct imsic_fwnode_ops *fwops, +struct fwnode_handle *fwnode, +void *fwopaque) +{ +struct resource res; +phys_addr_t base_addr; +int rc, nr_parent_irqs; +struct imsic_mmio *mmio; +struct imsic_priv *priv; +struct irq_domain *domain; +struct imsic_handler *handler;
drivers/irqchip/irq-riscv-imsic.c line 816
Quoted 10 lines
drivers/irqchip/irq-riscv-imsic.c new file +10
-0+struct imsic_global_config *global; +u32 i, tmp, nr_handlers =0 ; + +if (imsic_init_done) { +pr_err ("%pfwP: already initialized hence ignoring\n" , + fwnode); +return -ENODEV ; + } + +if (!riscv_isa_extension_available (NULL , SxAIA)) {
why pass NULL to check SxAIA isa extension?I encounter following error when launch Linux kernel.
[ 0.000000] riscv-imsic: imsics@28000000: AIA support not available [ 0.000000] OF: of_irq_init: Failed to init /soc/imsics@28000000
((____ptrval____)), parent (____ptrval____)
[ 0.940357] riscv-aplic d000000.aplic: IMSIC global config not found
Quoted 479 lines
drivers/irqchip/irq-riscv-imsic.c new file +391
-0+pr_err ("%pfwP: AIA support not available\n" , fwnode); +return -ENODEV ; + } + + priv =kzalloc (sizeof (*priv),GFP_KERNEL ); +if (!priv) +return -ENOMEM ; + global = &priv->global; + +/* Find number of parent interrupts */ + nr_parent_irqs = fwops->nr_parent_irq (fwnode, fwopaque); +if (!nr_parent_irqs) { +pr_err ("%pfwP: no parent irqs available\n" , fwnode); +return -EINVAL ; + } + +/* Find number of guest index bits in MSI address */ + rc = fwops->read_u32 (fwnode, fwopaque,"riscv,guest-index-bits" , + &global->guest_index_bits); +if (rc) + global->guest_index_bits =0 ; + tmp =BITS_PER_LONG -IMSIC_MMIO_PAGE_SHIFT ; +if (tmp < global->guest_index_bits) { +pr_err ("%pfwP: guest index bits too big\n" , fwnode); +return -EINVAL ; + } + +/* Find number of HART index bits */ + rc = fwops->read_u32 (fwnode, fwopaque,"riscv,hart-index-bits" , + &global->hart_index_bits); +if (rc) { +/* Assume default value */ + global->hart_index_bits =__fls (nr_parent_irqs); +if (BIT (global->hart_index_bits) < nr_parent_irqs) + global->hart_index_bits++; + } + tmp =BITS_PER_LONG -IMSIC_MMIO_PAGE_SHIFT - + global->guest_index_bits; +if (tmp < global->hart_index_bits) { +pr_err ("%pfwP: HART index bits too big\n" , fwnode); +return -EINVAL ; + } + +/* Find number of group index bits */ + rc = fwops->read_u32 (fwnode, fwopaque,"riscv,group-index-bits" , + &global->group_index_bits); +if (rc) + global->group_index_bits =0 ; + tmp =BITS_PER_LONG -IMSIC_MMIO_PAGE_SHIFT - + global->guest_index_bits - global->hart_index_bits; +if (tmp < global->group_index_bits) { +pr_err ("%pfwP: group index bits too big\n" , fwnode); +return -EINVAL ; + } + +/* Find first bit position of group index */ + tmp =IMSIC_MMIO_PAGE_SHIFT *2 ; + rc = fwops->read_u32 (fwnode, fwopaque,"riscv,group-index-shift" , + &global->group_index_shift); +if (rc) + global->group_index_shift = tmp; +if (global->group_index_shift < tmp) { +pr_err ("%pfwP: group index shift too small\n" , fwnode); +return -EINVAL ; + } + tmp = global->group_index_bits + global->group_index_shift -1 ; +if (tmp >=BITS_PER_LONG ) { +pr_err ("%pfwP: group index shift too big\n" , fwnode); +return -EINVAL ; + } + +/* Find number of interrupt identities */ + rc = fwops->read_u32 (fwnode, fwopaque,"riscv,num-ids" , + &global->nr_ids); +if (rc) { +pr_err ("%pfwP: number of interrupt identities not found\n" , + fwnode); +return rc; + } +if ((global->nr_ids <IMSIC_MIN_ID ) || + (global->nr_ids >=IMSIC_MAX_ID ) || + ((global->nr_ids &IMSIC_MIN_ID ) !=IMSIC_MIN_ID )) { +pr_err ("%pfwP: invalid number of interrupt identities\n" , + fwnode); +return -EINVAL ; + } + +/* Find number of guest interrupt identities */ +if (fwops->read_u32 (fwnode, fwopaque,"riscv,num-guest-ids" , + &global->nr_guest_ids)) + global->nr_guest_ids = global->nr_ids; +if ((global->nr_guest_ids <IMSIC_MIN_ID ) || + (global->nr_guest_ids >=IMSIC_MAX_ID ) || + ((global->nr_guest_ids &IMSIC_MIN_ID ) !=IMSIC_MIN_ID )) { +pr_err ("%pfwP: invalid number of guest interrupt identities\n" , + fwnode); +return -EINVAL ; + } + +/* Check if IPIs are slow */ + priv->slow_ipi = fwops->read_bool (fwnode, fwopaque,"riscv,slow-ipi" ); + +/* Compute base address */ + rc = fwops->mmio_to_resource (fwnode, fwopaque,0 , &res); +if (rc) { +pr_err ("%pfwP: first MMIO resource not found\n" , fwnode); +return -EINVAL ; + } + global->base_addr = res.start; + global->base_addr &= ~(BIT (global->guest_index_bits + + global->hart_index_bits + +IMSIC_MMIO_PAGE_SHIFT ) -1 ); + global->base_addr &= ~((BIT (global->group_index_bits) -1 ) << + global->group_index_shift); + +/* Find number of MMIO register sets */ + priv->num_mmios = fwops->nr_mmio (fwnode, fwopaque); + +/* Allocate MMIO register sets */ + priv->mmios =kcalloc (priv->num_mmios,sizeof (*mmio),GFP_KERNEL ); +if (!priv->mmios) { + rc = -ENOMEM ; + goto out_free_priv; + } + +/* Parse and map MMIO register sets */ +for (i =0 ; i < priv->num_mmios; i++) { + mmio = &priv->mmios[i]; + rc = fwops->mmio_to_resource (fwnode, fwopaque, i, &res); +if (rc) { +pr_err ("%pfwP: unable to parse MMIO regset %d\n" , + fwnode, i); + goto out_iounmap; + } + mmio->pa = res.start; + mmio->size = res.end - res.start +1 ; + + base_addr = mmio->pa; + base_addr &= ~(BIT (global->guest_index_bits + + global->hart_index_bits + +IMSIC_MMIO_PAGE_SHIFT ) -1 ); + base_addr &= ~((BIT (global->group_index_bits) -1 ) << + global->group_index_shift); +if (base_addr != global->base_addr) { + rc = -EINVAL ; +pr_err ("%pfwP: address mismatch for regset %d\n" , + fwnode, i); + goto out_iounmap; + } + + tmp =BIT (global->guest_index_bits) -1 ; +if ((mmio->size /IMSIC_MMIO_PAGE_SZ ) & tmp) { + rc = -EINVAL ; +pr_err ("%pfwP: size mismatch for regset %d\n" , + fwnode, i); + goto out_iounmap; + } + + mmio->va = fwops->mmio_map (fwnode, fwopaque, i); +if (!mmio->va) { + rc = -EIO ; +pr_err ("%pfwP: unable to map MMIO regset %d\n" , + fwnode, i); + goto out_iounmap; + } + } + +/* Initialize interrupt identity management */ + rc =imsic_ids_init (priv); +if (rc) { +pr_err ("%pfwP: failed to initialize interrupt management\n" , + fwnode); + goto out_iounmap; + } + +/* Configure handlers for target CPUs */ +for (i =0 ; i < nr_parent_irqs; i++) { +unsigned long reloff, hartid; +int j, cpu; + + rc = fwops->parent_hartid (fwnode, fwopaque, i, &hartid); +if (rc) { +pr_warn ("%pfwP: hart ID for parent irq%d not found\n" , + fwnode, i); +continue ; + } + + cpu =riscv_hartid_to_cpuid (hartid); +if (cpu <0 ) { +pr_warn ("%pfwP: invalid cpuid for parent irq%d\n" , + fwnode, i); +continue ; + } + +/* Find MMIO location of MSI page */ + mmio =NULL ; + reloff = i *BIT (global->guest_index_bits) * +IMSIC_MMIO_PAGE_SZ ; +for (j =0 ; priv->num_mmios; j++) { +if (reloff < priv->mmios[j].size) { + mmio = &priv->mmios[j]; +break ; + } + + reloff -= priv->mmios[j].size; + } +if (!mmio) { +pr_warn ("%pfwP: MMIO not found for parent irq%d\n" , + fwnode, i); +continue ; + } + + handler =per_cpu_ptr (&imsic_handlers, cpu); +if (handler->priv) { +pr_warn ("%pfwP: CPU%d handler already configured.\n" , + fwnode, cpu); + goto done; + } + +cpumask_set_cpu (cpu, &priv->lmask); + handler->local.msi_pa = mmio->pa + reloff; + handler->local.msi_va = mmio->va + reloff; + handler->priv = priv; + +done: + nr_handlers++; + } + +/* If no CPU handlers found then can't take interrupts */ +if (!nr_handlers) { +pr_err ("%pfwP: No CPU handlers found\n" , fwnode); + rc = -ENODEV ; + goto out_ids_cleanup; + } + +/* Find parent domain and register chained handler */ + domain =irq_find_matching_fwnode (riscv_get_intc_hwnode (), +DOMAIN_BUS_ANY ); +if (!domain) { +pr_err ("%pfwP: Failed to find INTC domain\n" , fwnode); + rc = -ENOENT ; + goto out_ids_cleanup; + } + imsic_parent_irq =irq_create_mapping (domain,RV_IRQ_EXT ); +if (!imsic_parent_irq) { +pr_err ("%pfwP: Failed to create INTC mapping\n" , fwnode); + rc = -ENOENT ; + goto out_ids_cleanup; + } +irq_set_chained_handler (imsic_parent_irq, imsic_handle_irq); + +/* Initialize IPI domain */ + rc =imsic_ipi_domain_init (priv); +if (rc) { +pr_err ("%pfwP: Failed to initialize IPI domain\n" , fwnode); + goto out_ids_cleanup; + } + +/* Initialize IRQ and MSI domains */ + rc =imsic_irq_domains_init (priv, fwnode); +if (rc) { +pr_err ("%pfwP: Failed to initialize IRQ and MSI domains\n" , + fwnode); + goto out_ipi_domain_cleanup; + } + +/* Setup cpuhp state */ +cpuhp_setup_state (CPUHP_AP_ONLINE_DYN , +"irqchip/riscv/imsic:starting" , + imsic_starting_cpu, imsic_dying_cpu); + +/* +* Only one IMSIC instance allowed in a platform for clean +* implementation of SMP IRQ affinity and per-CPU IPIs. +* +* This means on a multi-socket (or multi-die) platform we +* will have multiple MMIO regions for one IMSIC instance. +*/ + imsic_init_done = true; + +pr_info ("%pfwP: hart-index-bits: %d, guest-index-bits: %d\n" , + fwnode, global->hart_index_bits, global->guest_index_bits); +pr_info ("%pfwP: group-index-bits: %d, group-index-shift: %d\n" , + fwnode, global->group_index_bits, global->group_index_shift); +pr_info ("%pfwP: mapped %d interrupts for %d CPUs at %pa\n" , + fwnode, global->nr_ids, nr_handlers, &global->base_addr); +if (priv->ipi_lsync_id) +pr_info ("%pfwP: enable/disable sync using interrupt %d\n" , + fwnode, priv->ipi_lsync_id); +if (priv->ipi_id) +pr_info ("%pfwP: providing IPIs using interrupt %d\n" , + fwnode, priv->ipi_id); + +return 0 ; + +out_ipi_domain_cleanup: +imsic_ipi_domain_cleanup (priv); +out_ids_cleanup: +imsic_ids_cleanup (priv); +out_iounmap: +for (i =0 ; i < priv->num_mmios; i++) { +if (priv->mmios[i].va) +iounmap (priv->mmios[i].va); + } +kfree (priv->mmios); +out_free_priv: +kfree (priv); +return rc; +} + +static u32 __init imsic_dt_nr_parent_irq (struct fwnode_handle *fwnode, +void *fwopaque) +{ +return of_irq_count (to_of_node (fwnode)); +} + +static int __init imsic_dt_parent_hartid (struct fwnode_handle *fwnode, +void *fwopaque,u32 index, +unsigned long *out_hartid) +{ +struct of_phandle_args parent; +int rc; + + rc =of_irq_parse_one (to_of_node (fwnode), index, &parent); +if (rc) +return rc; + +/* +* Skip interrupts other than external interrupts for +* current privilege level. +*/ +if (parent.args[0 ] !=RV_IRQ_EXT ) +return -EINVAL ; + +return riscv_of_parent_hartid (parent.np, out_hartid); +} + +static u32 __init imsic_dt_nr_mmio (struct fwnode_handle *fwnode, +void *fwopaque) +{ +u32 ret =0 ; +struct resource res; + +while (!of_address_to_resource (to_of_node (fwnode), ret, &res)) + ret++; + +return ret; +} + +static int __init imsic_mmio_to_resource (struct fwnode_handle *fwnode, +void *fwopaque,u32 index, +struct resource *res) +{ +return of_address_to_resource (to_of_node (fwnode), index, res); +} + +static void __iomem __init *imsic_dt_mmio_map (struct fwnode_handle *fwnode, +void *fwopaque,u32 index) +{ +return of_iomap (to_of_node (fwnode), index); +} + +static int __init imsic_dt_read_u32 (struct fwnode_handle *fwnode, +void *fwopaque,const char *prop, +u32 *out_val) +{ +return of_property_read_u32 (to_of_node (fwnode), prop, out_val); +} + +static bool __init imsic_dt_read_bool (struct fwnode_handle *fwnode, +void *fwopaque,const char *prop) +{ +return of_property_read_bool (to_of_node (fwnode), prop); +} + +static int __init imsic_dt_init (struct device_node *node, +struct device_node *parent) +{ +struct imsic_fwnode_ops ops = { + .nr_parent_irq = imsic_dt_nr_parent_irq, + .parent_hartid = imsic_dt_parent_hartid, + .nr_mmio = imsic_dt_nr_mmio, + .mmio_to_resource = imsic_mmio_to_resource, + .mmio_map = imsic_dt_mmio_map, + .read_u32 = imsic_dt_read_u32, + .read_bool = imsic_dt_read_bool, + }; + +return imsic_init (&ops, &node->fwnode,NULL ); +} +IRQCHIP_DECLARE (riscv_imsic,"riscv,imsics" , imsic_dt_init);include/linux/irqchip/riscv-imsic.h new file +82
-0@@ -0,0 +1,92 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* +* Copyright (C) 2021 Western Digital Corporation or its affiliates. +* Copyright (C) 2022 Ventana Micro Systems Inc. +*/ +#ifndef __LINUX_IRQCHIP_RISCV_IMSIC_H +#define __LINUX_IRQCHIP_RISCV_IMSIC_H + +#include <linux/types.h> +#include <asm/csr.h> + +#define IMSIC_MMIO_PAGE_SHIFT 12 +#define IMSIC_MMIO_PAGE_SZ (1UL << IMSIC_MMIO_PAGE_SHIFT) +#define IMSIC_MMIO_PAGE_LE 0x00 +#define IMSIC_MMIO_PAGE_BE 0x04 + +#define IMSIC_MIN_ID 63 +#define IMSIC_MAX_ID 2048 + +#define IMSIC_EIDELIVERY 0x70 + +#define IMSIC_EITHRESHOLD 0x72 + +#define IMSIC_EIP0 0x80 +#define IMSIC_EIP63 0xbf +#define IMSIC_EIPx_BITS 32 + +#define IMSIC_EIE0 0xc0 +#define IMSIC_EIE63 0xff +#define IMSIC_EIEx_BITS 32 + +#define IMSIC_FIRST IMSIC_EIDELIVERY +#define IMSIC_LAST IMSIC_EIE63 + +#define IMSIC_MMIO_SETIPNUM_LE 0x00 +#define IMSIC_MMIO_SETIPNUM_BE 0x04 + +struct imsic_global_config { +/* +* MSI Target Address Scheme +* +* XLEN-1 12 0 +* | | | +* ------------------------------------------------------------- +* |xxxxxx|Group Index|xxxxxxxxxxx|HART Index|Guest Index| 0 | +* ------------------------------------------------------------- +*/ + +/* Bits representing Guest index, HART index, and Group index */ +u32 guest_index_bits; +u32 hart_index_bits; +u32 group_index_bits; +u32 group_index_shift; + +/* Global base address matching all target MSI addresses */ +phys_addr_t base_addr; + +/* Number of interrupt identities */ +u32 nr_ids; + +/* Number of guest interrupt identities */ +u32 nr_guest_ids; +}; + +struct imsic_local_config { +phys_addr_t msi_pa; +void __iomem *msi_va; +}; + +#ifdef CONFIG_RISCV_IMSIC + +extern const struct imsic_global_config *imsic_get_global_config (void ); + +extern const struct imsic_local_config *imsic_get_local_config ( +unsigned int cpu); + +#else + +static inline const struct imsic_global_config *imsic_get_global_config (void ) +{ +return NULL ; +}
include/linux/irqchip/riscv-imsic.h line 92
Quoted 10 lines
include/linux/irqchip/riscv-imsic.h new file +10
-0+ +static inline const struct imsic_local_config *imsic_get_local_config ( +unsigned int cpu) +{ +return NULL ; +} + +#endif + +#endif
_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv
Re: [PATCH 5/9] irqchip: Add RISC-V incoming MSI controller driver
Quoted 899 lines · Ruan Jinjie
Quoted 881 lines · Anup Patel
The RISC-V advanced interrupt architecture (AIA) specification defines a new MSI controller for managing MSIs on a RISC-V platform. This new MSI controller is referred to as incoming message signaled interrupt controller (IMSIC) which manages MSI on per-HART (or per-CPU) basis. (For more details refer https://github.com/riscv/riscv-aia)
This patch adds an irqchip driver for RISC-V IMSIC found on RISC-V platforms.
Signed-off-by Anup Patel <[email protected]>--- drivers/irqchip/Kconfig | 20 +- drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-riscv-imsic.c | 1207 +++++++++++++++++++++++++++ include/linux/irqchip/riscv-imsic.h | 92 ++ 4 files changed, 1319 insertions(+), 1 deletion(-) create mode 100644 drivers/irqchip/irq-riscv-imsic.c create mode 100644 include/linux/irqchip/riscv-imsic.hdrivers/irqchip/Kconfig +19
-1@@ -29,7 +29,6 @@ config ARM_GIC_V2M config GIC_NON_BANKED bool - config ARM_GIC_V3 bool select IRQ_DOMAIN_HIERARCHY@@ -564,6 +563,25 @@ config SIFIVE_PLIC If you don't know what to do here, say Y. +config RISCV_IMSIC + bool "RISC-V Incoming MSI Controller" + depends on RISCV + select IRQ_DOMAIN_HIERARCHY + select GENERIC_MSI_IRQ_DOMAIN + help + This enables support for the IMSIC chip found in RISC-V systems. + The IMSIC controls message signaled interrupts and forwards them + to each core as wired local interrupt. + + If you don't know what to do here, say Y. + +config RISCV_IMSIC_PCI + bool + depends on RISCV_IMSIC + depends on PCI + depends on PCI_MSI + default RISCV_IMSIC + config EXYNOS_IRQ_COMBINER bool "Samsung Exynos IRQ combiner support" if COMPILE_TEST depends on (ARCH_EXYNOS && ARM) || COMPILE_TESTdrivers/irqchip/Makefile +1
-0@@ -96,6 +96,7 @@ obj-$(CONFIG_QCOM_MPM) += irq-qcom-mpm.o obj-$(CONFIG_CSKY_MPINTC) += irq-csky-mpintc.o obj-$(CONFIG_CSKY_APB_INTC) += irq-csky-apb-intc.o obj-$(CONFIG_RISCV_INTC) += irq-riscv-intc.o +obj-$(CONFIG_RISCV_IMSIC) += irq-riscv-imsic.o obj-$(CONFIG_SIFIVE_PLIC) += irq-sifive-plic.o obj-$(CONFIG_IMX_IRQSTEER) += irq-imx-irqsteer.o obj-$(CONFIG_IMX_INTMUX) += irq-imx-intmux.odrivers/irqchip/irq-riscv-imsic.c new file +806
-0@@ -0,0 +1,1207 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Copyright (C) 2021 Western Digital Corporation or its affiliates. +* Copyright (C) 2022 Ventana Micro Systems Inc. +*/ + +#define pr_fmt (fmt) "riscv-imsic: " fmt +#include <linux/bitmap.h> +#include <linux/cpu.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/iommu.h> +#include <linux/irq.h> +#include <linux/irqchip.h> +#include <linux/irqchip/chained_irq.h> +#include <linux/irqchip/riscv-imsic.h> +#include <linux/irqdomain.h> +#include <linux/module.h> +#include <linux/msi.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/pci.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> +#include <linux/smp.h> +#include <asm/hwcap.h> + +#define IMSIC_DISABLE_EIDELIVERY 0 +#define IMSIC_ENABLE_EIDELIVERY 1 +#define IMSIC_DISABLE_EITHRESHOLD 1 +#define IMSIC_ENABLE_EITHRESHOLD 0 + +#define imsic_csr_write (__c, __v) \ +do { \ + csr_write(CSR_ISELECT, __c); \ + csr_write(CSR_IREG, __v); \ +} while (0) + +#define imsic_csr_read (__c) \ +({ \ + unsigned long __v; \ + csr_write(CSR_ISELECT, __c); \ + __v = csr_read(CSR_IREG); \ + __v; \ +}) + +#define imsic_csr_set (__c, __v) \ +do { \ + csr_write(CSR_ISELECT, __c); \ + csr_set(CSR_IREG, __v); \ +} while (0) + +#define imsic_csr_clear (__c, __v) \ +do { \ + csr_write(CSR_ISELECT, __c); \ + csr_clear(CSR_IREG, __v); \ +} while (0) + +struct imsic_mmio { +phys_addr_t pa; +void __iomem *va; +unsigned long size; +}; + +struct imsic_priv { +/* Global configuration common for all HARTs */ +struct imsic_global_config global; + +/* MMIO regions */ +u32 num_mmios; +struct imsic_mmio *mmios; + +/* Global state of interrupt identities */ +raw_spinlock_t ids_lock; +unsigned long *ids_used_bimap; +unsigned long *ids_enabled_bimap; +unsigned int *ids_target_cpu; + +/* Mask for connected CPUs */ +struct cpumask lmask; + +/* IPI interrupt identity */ +bool slow_ipi; +u32 ipi_id; +u32 ipi_lsync_id; + +/* IRQ domains */ +struct irq_domain *base_domain; +struct irq_domain *pci_domain; +struct irq_domain *plat_domain; +}; + +struct imsic_handler { +/* Local configuration for given HART */ +struct imsic_local_config local; + +/* Pointer to private context */ +struct imsic_priv *priv; +}; + +static bool imsic_init_done; + +static int imsic_parent_irq; +static DEFINE_PER_CPU(struct imsic_handler, imsic_handlers); + +const struct imsic_global_config *imsic_get_global_config (void ) +{ +struct imsic_handler *handler =this_cpu_ptr (&imsic_handlers); + +if (!handler || !handler->priv) +return NULL ; + +return &handler->priv->global; +} +EXPORT_SYMBOL_GPL (imsic_get_global_config); + +const struct imsic_local_config *imsic_get_local_config (unsigned int cpu) +{ +struct imsic_handler *handler =per_cpu_ptr (&imsic_handlers, cpu); + +if (!handler || !handler->priv) +return NULL ; + +return &handler->local; +} +EXPORT_SYMBOL_GPL (imsic_get_local_config); + +static int imsic_cpu_page_phys (unsigned int cpu, +unsigned int guest_index, +phys_addr_t *out_msi_pa) +{ +struct imsic_handler *handler =per_cpu_ptr (&imsic_handlers, cpu); +struct imsic_global_config *global; +struct imsic_local_config *local; + +if (!handler || !handler->priv) +return -ENODEV ; + local = &handler->local; + global = &handler->priv->global; + +if (BIT (global->guest_index_bits) <= guest_index) +return -EINVAL ; + +if (out_msi_pa) + *out_msi_pa = local->msi_pa + + (guest_index *IMSIC_MMIO_PAGE_SZ ); + +return 0 ; +} + +static int imsic_get_cpu (struct imsic_priv *priv, +const struct cpumask *mask_val,bool force, +unsigned int *out_target_cpu) +{ +struct cpumask amask; +unsigned int cpu; + +cpumask_and (&amask, &priv->lmask, mask_val); + +if (force) + cpu =cpumask_first (&amask); +else + cpu =cpumask_any_and (&amask, cpu_online_mask); + +if (cpu >= nr_cpu_ids) +return -EINVAL ; + +if (out_target_cpu) + *out_target_cpu = cpu; + +return 0 ; +} + +static int imsic_get_cpu_msi_msg (unsigned int cpu,unsigned int id, +struct msi_msg *msg) +{ +phys_addr_t msi_addr; +int err; + + err =imsic_cpu_page_phys (cpu,0 , &msi_addr); +if (err) +return err; + + msg->address_hi =upper_32_bits (msi_addr); + msg->address_lo =lower_32_bits (msi_addr); + msg->data = id; + +return err; +} + +static void imsic_id_set_target (struct imsic_priv *priv, +unsigned int id,unsigned int target_cpu) +{ +raw_spin_lock (&priv->ids_lock); + priv->ids_target_cpu[id] = target_cpu; +raw_spin_unlock (&priv->ids_lock); +} + +static unsigned int imsic_id_get_target (struct imsic_priv *priv, +unsigned int id) +{ +unsigned int ret; + +raw_spin_lock (&priv->ids_lock); + ret = priv->ids_target_cpu[id]; +raw_spin_unlock (&priv->ids_lock); + +return ret; +} + +static void __imsic_eix_update (unsigned long base_id, +unsigned long num_id,bool pend,bool val) +{ +unsigned long i, isel, ireg, flags; +unsigned long id = base_id, last_id = base_id + num_id; + +while (id < last_id) { + isel = id /BITS_PER_LONG ; + isel *=BITS_PER_LONG / IMSIC_EIPx_BITS; + isel += (pend) ?IMSIC_EIP0 :IMSIC_EIE0 ; + + ireg =0 ; +for (i = id & (__riscv_xlen -1 ); + (id < last_id) && (i < __riscv_xlen); i++) { + ireg |=BIT (i); + id++; + } + +/* +* The IMSIC EIEx and EIPx registers are indirectly +* accessed via using ISELECT and IREG CSRs so we +* save/restore local IRQ to ensure that we don't +* get preempted while accessing IMSIC registers. +*/ +local_irq_save (flags); +if (val) +imsic_csr_set (isel, ireg); +else +imsic_csr_clear (isel, ireg); +local_irq_restore (flags); + } +} + +#define __imsic_id_enable (__id) \ + __imsic_eix_update((__id), 1, false, true) +#define __imsic_id_disable (__id) \ + __imsic_eix_update((__id), 1, false, false) + +#ifdef CONFIG_SMP +static void __imsic_id_smp_sync (struct imsic_priv *priv) +{ +struct imsic_handler *handler; +struct cpumask amask; +int cpu; + +cpumask_and (&amask, &priv->lmask, cpu_online_mask); +for_each_cpu (cpu, &amask) { +if (cpu ==smp_processor_id ()) +continue ; + + handler =per_cpu_ptr (&imsic_handlers, cpu); +if (!handler || !handler->priv || !handler->local.msi_va) { +pr_warn ("CPU%d: handler not initialized\n" , cpu); +continue ; + } + +writel (handler->priv->ipi_lsync_id, handler->local.msi_va); + } +} +#else +#define __imsic_id_smp_sync (__priv) +#endif + +static void imsic_id_enable (struct imsic_priv *priv,unsigned int id) +{ +raw_spin_lock (&priv->ids_lock); +bitmap_set (priv->ids_enabled_bimap, id,1 ); +__imsic_id_enable (id); +raw_spin_unlock (&priv->ids_lock); + +__imsic_id_smp_sync (priv); +} + +static void imsic_id_disable (struct imsic_priv *priv,unsigned int id) +{ +raw_spin_lock (&priv->ids_lock); +bitmap_clear (priv->ids_enabled_bimap, id,1 ); +__imsic_id_disable (id); +raw_spin_unlock (&priv->ids_lock); + +__imsic_id_smp_sync (priv); +} + +static void imsic_ids_local_sync (struct imsic_priv *priv) +{ +int i; + +raw_spin_lock (&priv->ids_lock); +for (i =1 ; i <= priv->global.nr_ids; i++) { +if (priv->ipi_id == i || priv->ipi_lsync_id == i) +continue ; + +if (test_bit (i, priv->ids_enabled_bimap)) +__imsic_id_enable (i); +else +__imsic_id_disable (i); + } +raw_spin_unlock (&priv->ids_lock); +} + +static void imsic_ids_local_delivery (struct imsic_priv *priv,bool enable) +{ +if (enable) { +imsic_csr_write (IMSIC_EITHRESHOLD ,IMSIC_ENABLE_EITHRESHOLD ); +imsic_csr_write (IMSIC_EIDELIVERY ,IMSIC_ENABLE_EIDELIVERY ); + }else { +imsic_csr_write (IMSIC_EIDELIVERY ,IMSIC_DISABLE_EIDELIVERY ); +imsic_csr_write (IMSIC_EITHRESHOLD ,IMSIC_DISABLE_EITHRESHOLD ); + } +} + +static int imsic_ids_alloc (struct imsic_priv *priv, +unsigned int max_id,unsigned int order) +{ +int ret; + +if ((priv->global.nr_ids < max_id) || + (max_id <BIT (order))) +return -EINVAL ; + +raw_spin_lock (&priv->ids_lock); + ret =bitmap_find_free_region (priv->ids_used_bimap, + max_id +1 , order); +raw_spin_unlock (&priv->ids_lock); + +return ret; +} + +static void imsic_ids_free (struct imsic_priv *priv,unsigned int base_id, +unsigned int order) +{ +raw_spin_lock (&priv->ids_lock); +bitmap_release_region (priv->ids_used_bimap, base_id, order); +raw_spin_unlock (&priv->ids_lock); +} + +static int __init imsic_ids_init (struct imsic_priv *priv) +{ +int i; +struct imsic_global_config *global = &priv->global; + +raw_spin_lock_init (&priv->ids_lock); + +/* Allocate used bitmap */ + priv->ids_used_bimap =kcalloc (BITS_TO_LONGS (global->nr_ids +1 ), +sizeof (unsigned long ),GFP_KERNEL ); +if (!priv->ids_used_bimap) +return -ENOMEM ; + +/* Allocate enabled bitmap */ + priv->ids_enabled_bimap =kcalloc (BITS_TO_LONGS (global->nr_ids +1 ), +sizeof (unsigned long ),GFP_KERNEL ); +if (!priv->ids_enabled_bimap) { +kfree (priv->ids_used_bimap); +return -ENOMEM ; + } + +/* Allocate target CPU array */ + priv->ids_target_cpu =kcalloc (global->nr_ids +1 , +sizeof (unsigned int ),GFP_KERNEL ); +if (!priv->ids_target_cpu) { +kfree (priv->ids_enabled_bimap); +kfree (priv->ids_used_bimap); +return -ENOMEM ; + } +for (i =0 ; i <= global->nr_ids; i++) + priv->ids_target_cpu[i] =UINT_MAX ; + +/* Reserve ID#0 because it is special and never implemented */ +bitmap_set (priv->ids_used_bimap,0 ,1 ); + +return 0 ; +} + +static void __init imsic_ids_cleanup (struct imsic_priv *priv) +{ +kfree (priv->ids_target_cpu); +kfree (priv->ids_enabled_bimap); +kfree (priv->ids_used_bimap); +} + +#ifdef CONFIG_SMP +static void imsic_ipi_send_mask (unsigned int parent_virq,void *data, +const struct cpumask *mask) +{ +int cpu; +struct imsic_handler *handler; + +for_each_cpu (cpu, mask) { + handler =per_cpu_ptr (&imsic_handlers, cpu); +if (!handler || !handler->priv || !handler->local.msi_va) { +pr_warn ("CPU%d: handler not initialized\n" , cpu); +continue ; + } + +writel (handler->priv->ipi_id, handler->local.msi_va); + } +} + +static struct ipi_mux_ops imsic_ipi_ops = { + .ipi_mux_send = imsic_ipi_send_mask, +}; + +static void imsic_ipi_enable (struct imsic_priv *priv) +{ +__imsic_id_enable (priv->ipi_id); +__imsic_id_enable (priv->ipi_lsync_id); +} + +static void imsic_ipi_disable (struct imsic_priv *priv) +{ +__imsic_id_disable (priv->ipi_lsync_id); +__imsic_id_disable (priv->ipi_id); +} + +static int __init imsic_ipi_domain_init (struct imsic_priv *priv) +{ +int virq; + +/* Skip IPI setup if IPIs are slow */ +if (priv->slow_ipi) + goto skip_ipi; + +/* Allocate interrupt identity for IPIs */ + virq =imsic_ids_alloc (priv, priv->global.nr_ids,get_count_order (1 )); +if (virq <0 ) +return virq; + priv->ipi_id = virq; + +/* Create IMSIC IPI multiplexing */ + virq =ipi_mux_create (0 ,BITS_PER_BYTE , &imsic_ipi_ops,NULL ); +if (virq <=0 ) { +imsic_ids_free (priv, priv->ipi_id,get_count_order (1 )); +return (virq <0 ) ? virq : -ENOMEM ; + } + +/* Set vIRQ range */ +riscv_ipi_set_virq_range (virq,BITS_PER_BYTE , true); + +skip_ipi: +/* Allocate interrupt identity for local enable/disable sync */ + virq =imsic_ids_alloc (priv, priv->global.nr_ids,get_count_order (1 )); +if (virq <0 ) { +imsic_ids_free (priv, priv->ipi_id,get_count_order (1 )); +return virq; + } + priv->ipi_lsync_id = virq; + +return 0 ; +} + +static void __init imsic_ipi_domain_cleanup (struct imsic_priv *priv) +{ +imsic_ids_free (priv, priv->ipi_lsync_id,get_count_order (1 )); +if (priv->ipi_id) +imsic_ids_free (priv, priv->ipi_id,get_count_order (1 )); +} +#else +static void imsic_ipi_enable (struct imsic_priv *priv) +{ +} + +static void imsic_ipi_disable (struct imsic_priv *priv) +{ +} + +static int __init imsic_ipi_domain_init (struct imsic_priv *priv) +{ +/* Clear the IPI ids because we are not using IPIs */ + priv->ipi_id =0 ; + priv->ipi_lsync_id =0 ; +return 0 ; +} + +static void __init imsic_ipi_domain_cleanup (struct imsic_priv *priv) +{ +} +#endif + +static void imsic_irq_mask (struct irq_data *d) +{ +imsic_id_disable (irq_data_get_irq_chip_data (d), d->hwirq); +} + +static void imsic_irq_unmask (struct irq_data *d) +{ +imsic_id_enable (irq_data_get_irq_chip_data (d), d->hwirq); +} + +static void imsic_irq_compose_msi_msg (struct irq_data *d, +struct msi_msg *msg) +{ +struct imsic_priv *priv =irq_data_get_irq_chip_data (d); +unsigned int cpu; +int err; + + cpu =imsic_id_get_target (priv, d->hwirq); +WARN_ON (cpu ==UINT_MAX ); + + err =imsic_get_cpu_msi_msg (cpu, d->hwirq, msg); +WARN_ON (err); + +iommu_dma_compose_msi_msg (irq_data_get_msi_desc (d), msg); +} + +#ifdef CONFIG_SMP +static int imsic_irq_set_affinity (struct irq_data *d, +const struct cpumask *mask_val, +bool force) +{ +struct imsic_priv *priv =irq_data_get_irq_chip_data (d); +unsigned int target_cpu; +int rc; + + rc =imsic_get_cpu (priv, mask_val, force, &target_cpu); +if (rc) +return rc; + +imsic_id_set_target (priv, d->hwirq, target_cpu); +irq_data_update_effective_affinity (d,cpumask_of (target_cpu)); + +return IRQ_SET_MASK_OK ; +} +#endif + +static struct irq_chip imsic_irq_base_chip = { + .name ="RISC-V IMSIC-BASE" , + .irq_mask = imsic_irq_mask, + .irq_unmask = imsic_irq_unmask, +#ifdef CONFIG_SMP + .irq_set_affinity = imsic_irq_set_affinity, +#endif + .irq_compose_msi_msg = imsic_irq_compose_msi_msg, + .flags =IRQCHIP_SKIP_SET_WAKE | +IRQCHIP_MASK_ON_SUSPEND , +}; + +static int imsic_irq_domain_alloc (struct irq_domain *domain, +unsigned int virq, +unsigned int nr_irqs, +void *args) +{ +struct imsic_priv *priv = domain->host_data; +msi_alloc_info_t *info = args; +phys_addr_t msi_addr; +int i, hwirq, err =0 ; +unsigned int cpu; + + err =imsic_get_cpu (priv, &priv->lmask, false, &cpu); +if (err) +return err; + + err =imsic_cpu_page_phys (cpu,0 , &msi_addr); +if (err) +return err; + + hwirq =imsic_ids_alloc (priv, priv->global.nr_ids, +get_count_order (nr_irqs)); +if (hwirq <0 ) +return hwirq; + + err =iommu_dma_prepare_msi (info->desc, msi_addr); +if (err) + goto fail; + +for (i =0 ; i < nr_irqs; i++) { +imsic_id_set_target (priv, hwirq + i, cpu); +irq_domain_set_info (domain, virq + i, hwirq + i, + &imsic_irq_base_chip, priv, + handle_simple_irq,NULL ,NULL ); +irq_set_noprobe (virq + i); +irq_set_affinity (virq + i, &priv->lmask); + } + +return 0 ; + +fail: +imsic_ids_free (priv, hwirq,get_count_order (nr_irqs)); +return err; +} + +static void imsic_irq_domain_free (struct irq_domain *domain, +unsigned int virq, +unsigned int nr_irqs) +{ +struct irq_data *d =irq_domain_get_irq_data (domain, virq); +struct imsic_priv *priv = domain->host_data; + +imsic_ids_free (priv, d->hwirq,get_count_order (nr_irqs)); +irq_domain_free_irqs_parent (domain, virq, nr_irqs); +} + +static const struct irq_domain_ops imsic_base_domain_ops = { + .alloc = imsic_irq_domain_alloc, + .free = imsic_irq_domain_free, +}; + +#ifdef CONFIG_RISCV_IMSIC_PCI + +static void imsic_pci_mask_irq (struct irq_data *d) +{ +pci_msi_mask_irq (d); +irq_chip_mask_parent (d); +} + +static void imsic_pci_unmask_irq (struct irq_data *d) +{ +pci_msi_unmask_irq (d); +irq_chip_unmask_parent (d); +} + +static struct irq_chip imsic_pci_irq_chip = { + .name ="RISC-V IMSIC-PCI" , + .irq_mask = imsic_pci_mask_irq, + .irq_unmask = imsic_pci_unmask_irq, + .irq_eoi = irq_chip_eoi_parent, +}; + +static struct msi_domain_ops imsic_pci_domain_ops = { +}; + +static struct msi_domain_info imsic_pci_domain_info = { + .flags = (MSI_FLAG_USE_DEF_DOM_OPS |MSI_FLAG_USE_DEF_CHIP_OPS | +MSI_FLAG_PCI_MSIX |MSI_FLAG_MULTI_PCI_MSI ), + .ops = &imsic_pci_domain_ops, + .chip = &imsic_pci_irq_chip, +}; + +#endif + +static struct irq_chip imsic_plat_irq_chip = { + .name ="RISC-V IMSIC-PLAT" , +}; + +static struct msi_domain_ops imsic_plat_domain_ops = { +}; + +static struct msi_domain_info imsic_plat_domain_info = { + .flags = (MSI_FLAG_USE_DEF_DOM_OPS |MSI_FLAG_USE_DEF_CHIP_OPS ), + .ops = &imsic_plat_domain_ops, + .chip = &imsic_plat_irq_chip, +}; + +static int __init imsic_irq_domains_init (struct imsic_priv *priv, +struct fwnode_handle *fwnode) +{ +/* Create Base IRQ domain */ + priv->base_domain =irq_domain_create_tree (fwnode, + &imsic_base_domain_ops, priv); +if (!priv->base_domain) { +pr_err ("Failed to create IMSIC base domain\n" ); +return -ENOMEM ; + } +irq_domain_update_bus_token (priv->base_domain,DOMAIN_BUS_NEXUS ); + +#ifdef CONFIG_RISCV_IMSIC_PCI +/* Create PCI MSI domain */ + priv->pci_domain =pci_msi_create_irq_domain (fwnode, + &imsic_pci_domain_info, + priv->base_domain); +if (!priv->pci_domain) { +pr_err ("Failed to create IMSIC PCI domain\n" ); +irq_domain_remove (priv->base_domain); +return -ENOMEM ; + } +#endif + +/* Create Platform MSI domain */ + priv->plat_domain =platform_msi_create_irq_domain (fwnode, + &imsic_plat_domain_info, + priv->base_domain); +if (!priv->plat_domain) { +pr_err ("Failed to create IMSIC platform domain\n" ); +if (priv->pci_domain) +irq_domain_remove (priv->pci_domain); +irq_domain_remove (priv->base_domain); +return -ENOMEM ; + } + +return 0 ; +} + +/* +* To handle an interrupt, we read the TOPEI CSR and write zero in one +* instruction. If TOPEI CSR is non-zero then we translate TOPEI.ID to +* Linux interrupt number and let Linux IRQ subsystem handle it. +*/ +static void imsic_handle_irq (struct irq_desc *desc) +{ +struct imsic_handler *handler =this_cpu_ptr (&imsic_handlers); +struct irq_chip *chip =irq_desc_get_chip (desc); +struct imsic_priv *priv = handler->priv; +irq_hw_number_t hwirq; +int err; + +WARN_ON_ONCE (!handler->priv); + +chained_irq_enter (chip, desc); + +while ((hwirq =csr_swap (CSR_TOPEI ,0 ))) { + hwirq = hwirq >>TOPEI_ID_SHIFT ; + +if (hwirq == priv->ipi_id) { +#ifdef CONFIG_SMP +ipi_mux_process (); +#endif +continue ; + }else if (hwirq == priv->ipi_lsync_id) { +imsic_ids_local_sync (priv); +continue ; + } + + err =generic_handle_domain_irq (priv->base_domain, hwirq); +if (unlikely (err)) +pr_warn_ratelimited ( +"hwirq %lu mapping not found\n" , hwirq); + } + +chained_irq_exit (chip, desc); +} + +static int imsic_dying_cpu (unsigned int cpu) +{ +struct imsic_handler *handler =this_cpu_ptr (&imsic_handlers); +struct imsic_priv *priv = handler->priv; + +/* Disable per-CPU parent interrupt */ +if (imsic_parent_irq) +disable_percpu_irq (imsic_parent_irq); + +/* Locally disable interrupt delivery */ +imsic_ids_local_delivery (priv, false); + +/* Disable IPIs */ +imsic_ipi_disable (priv); + +return 0 ; +} + +static int imsic_starting_cpu (unsigned int cpu) +{ +struct imsic_handler *handler =this_cpu_ptr (&imsic_handlers); +struct imsic_priv *priv = handler->priv; + +/* Enable per-CPU parent interrupt */ +if (imsic_parent_irq) +enable_percpu_irq (imsic_parent_irq, +irq_get_trigger_type (imsic_parent_irq)); +else +pr_warn ("cpu%d: parent irq not available\n" , cpu); + +/* Enable IPIs */ +imsic_ipi_enable (priv); + +/* +* Interrupts identities might have been enabled/disabled while +* this CPU was not running so sync-up local enable/disable state. +*/ +imsic_ids_local_sync (priv); + +/* Locally enable interrupt delivery */ +imsic_ids_local_delivery (priv, true); + +return 0 ; +} + +struct imsic_fwnode_ops { +u32 (*nr_parent_irq)(struct fwnode_handle *fwnode, +void *fwopaque); +int (*parent_hartid)(struct fwnode_handle *fwnode, +void *fwopaque,u32 index, +unsigned long *out_hartid); +u32 (*nr_mmio)(struct fwnode_handle *fwnode,void *fwopaque); +int (*mmio_to_resource)(struct fwnode_handle *fwnode, +void *fwopaque,u32 index, +struct resource *res); +void __iomem *(*mmio_map)(struct fwnode_handle *fwnode, +void *fwopaque,u32 index); +int (*read_u32)(struct fwnode_handle *fwnode, +void *fwopaque,const char *prop,u32 *out_val); +bool (*read_bool)(struct fwnode_handle *fwnode, +void *fwopaque,const char *prop); +}; + +static int __init imsic_init (struct imsic_fwnode_ops *fwops, +struct fwnode_handle *fwnode, +void *fwopaque) +{ +struct resource res; +phys_addr_t base_addr; +int rc, nr_parent_irqs; +struct imsic_mmio *mmio; +struct imsic_priv *priv; +struct irq_domain *domain; +struct imsic_handler *handler;drivers/irqchip/irq-riscv-imsic.c line 816
Quoted 10 lines
drivers/irqchip/irq-riscv-imsic.c new file +10
-0+struct imsic_global_config *global; +u32 i, tmp, nr_handlers =0 ; + +if (imsic_init_done) { +pr_err ("%pfwP: already initialized hence ignoring\n" , + fwnode); +return -ENODEV ; + } + +if (!riscv_isa_extension_available (NULL , SxAIA)) {why pass NULL to check SxAIA isa extension?I encounter following error when launch Linux kernel.
Quoted 5 lines
[ 0.000000] riscv-imsic: imsics@28000000: AIA support not available [ 0.000000] OF: of_irq_init: Failed to init /soc/imsics@28000000((
____ptrval____)), parent (____ptrval____)[ 0.940357] riscv-aplic d000000.aplic: IMSIC global config not found
This is not related to the NULL parameter. It seems you don't have Ssaia in the ISA strings of CPU DT nodes.
Regards,
Anup
Quoted 488 lines
Quoted 488 lines
drivers/irqchip/irq-riscv-imsic.c new file +391
-0+pr_err ("%pfwP: AIA support not available\n" , fwnode); +return -ENODEV ; + } + + priv =kzalloc (sizeof (*priv),GFP_KERNEL ); +if (!priv) +return -ENOMEM ; + global = &priv->global; + +/* Find number of parent interrupts */ + nr_parent_irqs = fwops->nr_parent_irq (fwnode, fwopaque); +if (!nr_parent_irqs) { +pr_err ("%pfwP: no parent irqs available\n" , fwnode); +return -EINVAL ; + } + +/* Find number of guest index bits in MSI address */ + rc = fwops->read_u32 (fwnode, fwopaque,"riscv,guest-index-bits" , + &global->guest_index_bits); +if (rc) + global->guest_index_bits =0 ; + tmp =BITS_PER_LONG -IMSIC_MMIO_PAGE_SHIFT ; +if (tmp < global->guest_index_bits) { +pr_err ("%pfwP: guest index bits too big\n" , fwnode); +return -EINVAL ; + } + +/* Find number of HART index bits */ + rc = fwops->read_u32 (fwnode, fwopaque,"riscv,hart-index-bits" , + &global->hart_index_bits); +if (rc) { +/* Assume default value */ + global->hart_index_bits =__fls (nr_parent_irqs); +if (BIT (global->hart_index_bits) < nr_parent_irqs) + global->hart_index_bits++; + } + tmp =BITS_PER_LONG -IMSIC_MMIO_PAGE_SHIFT - + global->guest_index_bits; +if (tmp < global->hart_index_bits) { +pr_err ("%pfwP: HART index bits too big\n" , fwnode); +return -EINVAL ; + } + +/* Find number of group index bits */ + rc = fwops->read_u32 (fwnode, fwopaque,"riscv,group-index-bits" , + &global->group_index_bits); +if (rc) + global->group_index_bits =0 ; + tmp =BITS_PER_LONG -IMSIC_MMIO_PAGE_SHIFT - + global->guest_index_bits - global->hart_index_bits; +if (tmp < global->group_index_bits) { +pr_err ("%pfwP: group index bits too big\n" , fwnode); +return -EINVAL ; + } + +/* Find first bit position of group index */ + tmp =IMSIC_MMIO_PAGE_SHIFT *2 ; + rc = fwops->read_u32 (fwnode, fwopaque,"riscv,group-index-shift" , + &global->group_index_shift); +if (rc) + global->group_index_shift = tmp; +if (global->group_index_shift < tmp) { +pr_err ("%pfwP: group index shift too small\n" , fwnode); +return -EINVAL ; + } + tmp = global->group_index_bits + global->group_index_shift -1 ; +if (tmp >=BITS_PER_LONG ) { +pr_err ("%pfwP: group index shift too big\n" , fwnode); +return -EINVAL ; + } + +/* Find number of interrupt identities */ + rc = fwops->read_u32 (fwnode, fwopaque,"riscv,num-ids" , + &global->nr_ids); +if (rc) { +pr_err ("%pfwP: number of interrupt identities not found\n" , + fwnode); +return rc; + } +if ((global->nr_ids <IMSIC_MIN_ID ) || + (global->nr_ids >=IMSIC_MAX_ID ) || + ((global->nr_ids &IMSIC_MIN_ID ) !=IMSIC_MIN_ID )) { +pr_err ("%pfwP: invalid number of interrupt identities\n" , + fwnode); +return -EINVAL ; + } + +/* Find number of guest interrupt identities */ +if (fwops->read_u32 (fwnode, fwopaque,"riscv,num-guest-ids" , + &global->nr_guest_ids)) + global->nr_guest_ids = global->nr_ids; +if ((global->nr_guest_ids <IMSIC_MIN_ID ) || + (global->nr_guest_ids >=IMSIC_MAX_ID ) || + ((global->nr_guest_ids &IMSIC_MIN_ID ) !=IMSIC_MIN_ID )) { +pr_err ("%pfwP: invalid number of guest interrupt identities\n" , + fwnode); +return -EINVAL ; + } + +/* Check if IPIs are slow */ + priv->slow_ipi = fwops->read_bool (fwnode, fwopaque,"riscv,slow-ipi" ); + +/* Compute base address */ + rc = fwops->mmio_to_resource (fwnode, fwopaque,0 , &res); +if (rc) { +pr_err ("%pfwP: first MMIO resource not found\n" , fwnode); +return -EINVAL ; + } + global->base_addr = res.start; + global->base_addr &= ~(BIT (global->guest_index_bits + + global->hart_index_bits + +IMSIC_MMIO_PAGE_SHIFT ) -1 ); + global->base_addr &= ~((BIT (global->group_index_bits) -1 ) << + global->group_index_shift); + +/* Find number of MMIO register sets */ + priv->num_mmios = fwops->nr_mmio (fwnode, fwopaque); + +/* Allocate MMIO register sets */ + priv->mmios =kcalloc (priv->num_mmios,sizeof (*mmio),GFP_KERNEL ); +if (!priv->mmios) { + rc = -ENOMEM ; + goto out_free_priv; + } + +/* Parse and map MMIO register sets */ +for (i =0 ; i < priv->num_mmios; i++) { + mmio = &priv->mmios[i]; + rc = fwops->mmio_to_resource (fwnode, fwopaque, i, &res); +if (rc) { +pr_err ("%pfwP: unable to parse MMIO regset %d\n" , + fwnode, i); + goto out_iounmap; + } + mmio->pa = res.start; + mmio->size = res.end - res.start +1 ; + + base_addr = mmio->pa; + base_addr &= ~(BIT (global->guest_index_bits + + global->hart_index_bits + +IMSIC_MMIO_PAGE_SHIFT ) -1 ); + base_addr &= ~((BIT (global->group_index_bits) -1 ) << + global->group_index_shift); +if (base_addr != global->base_addr) { + rc = -EINVAL ; +pr_err ("%pfwP: address mismatch for regset %d\n" , + fwnode, i); + goto out_iounmap; + } + + tmp =BIT (global->guest_index_bits) -1 ; +if ((mmio->size /IMSIC_MMIO_PAGE_SZ ) & tmp) { + rc = -EINVAL ; +pr_err ("%pfwP: size mismatch for regset %d\n" , + fwnode, i); + goto out_iounmap; + } + + mmio->va = fwops->mmio_map (fwnode, fwopaque, i); +if (!mmio->va) { + rc = -EIO ; +pr_err ("%pfwP: unable to map MMIO regset %d\n" , + fwnode, i); + goto out_iounmap; + } + } + +/* Initialize interrupt identity management */ + rc =imsic_ids_init (priv); +if (rc) { +pr_err ("%pfwP: failed to initialize interrupt management\n" , + fwnode); + goto out_iounmap; + } + +/* Configure handlers for target CPUs */ +for (i =0 ; i < nr_parent_irqs; i++) { +unsigned long reloff, hartid; +int j, cpu; + + rc = fwops->parent_hartid (fwnode, fwopaque, i, &hartid); +if (rc) { +pr_warn ("%pfwP: hart ID for parent irq%d not found\n" , + fwnode, i); +continue ; + } + + cpu =riscv_hartid_to_cpuid (hartid); +if (cpu <0 ) { +pr_warn ("%pfwP: invalid cpuid for parent irq%d\n" , + fwnode, i); +continue ; + } + +/* Find MMIO location of MSI page */ + mmio =NULL ; + reloff = i *BIT (global->guest_index_bits) * +IMSIC_MMIO_PAGE_SZ ; +for (j =0 ; priv->num_mmios; j++) { +if (reloff < priv->mmios[j].size) { + mmio = &priv->mmios[j]; +break ; + } + + reloff -= priv->mmios[j].size; + } +if (!mmio) { +pr_warn ("%pfwP: MMIO not found for parent irq%d\n" , + fwnode, i); +continue ; + } + + handler =per_cpu_ptr (&imsic_handlers, cpu); +if (handler->priv) { +pr_warn ("%pfwP: CPU%d handler already configured.\n" , + fwnode, cpu); + goto done; + } + +cpumask_set_cpu (cpu, &priv->lmask); + handler->local.msi_pa = mmio->pa + reloff; + handler->local.msi_va = mmio->va + reloff; + handler->priv = priv; + +done: + nr_handlers++; + } + +/* If no CPU handlers found then can't take interrupts */ +if (!nr_handlers) { +pr_err ("%pfwP: No CPU handlers found\n" , fwnode); + rc = -ENODEV ; + goto out_ids_cleanup; + } + +/* Find parent domain and register chained handler */ + domain =irq_find_matching_fwnode (riscv_get_intc_hwnode (), +DOMAIN_BUS_ANY ); +if (!domain) { +pr_err ("%pfwP: Failed to find INTC domain\n" , fwnode); + rc = -ENOENT ; + goto out_ids_cleanup; + } + imsic_parent_irq =irq_create_mapping (domain,RV_IRQ_EXT ); +if (!imsic_parent_irq) { +pr_err ("%pfwP: Failed to create INTC mapping\n" , fwnode); + rc = -ENOENT ; + goto out_ids_cleanup; + } +irq_set_chained_handler (imsic_parent_irq, imsic_handle_irq); + +/* Initialize IPI domain */ + rc =imsic_ipi_domain_init (priv); +if (rc) { +pr_err ("%pfwP: Failed to initialize IPI domain\n" , fwnode); + goto out_ids_cleanup; + } + +/* Initialize IRQ and MSI domains */ + rc =imsic_irq_domains_init (priv, fwnode); +if (rc) { +pr_err ("%pfwP: Failed to initialize IRQ and MSI domains\n" , + fwnode); + goto out_ipi_domain_cleanup; + } + +/* Setup cpuhp state */ +cpuhp_setup_state (CPUHP_AP_ONLINE_DYN , +"irqchip/riscv/imsic:starting" , + imsic_starting_cpu, imsic_dying_cpu); + +/* +* Only one IMSIC instance allowed in a platform for clean +* implementation of SMP IRQ affinity and per-CPU IPIs. +* +* This means on a multi-socket (or multi-die) platform we +* will have multiple MMIO regions for one IMSIC instance. +*/ + imsic_init_done = true; + +pr_info ("%pfwP: hart-index-bits: %d, guest-index-bits: %d\n" , + fwnode, global->hart_index_bits, global->guest_index_bits); +pr_info ("%pfwP: group-index-bits: %d, group-index-shift: %d\n" , + fwnode, global->group_index_bits, global->group_index_shift); +pr_info ("%pfwP: mapped %d interrupts for %d CPUs at %pa\n" , + fwnode, global->nr_ids, nr_handlers, &global->base_addr); +if (priv->ipi_lsync_id) +pr_info ("%pfwP: enable/disable sync using interrupt %d\n" , + fwnode, priv->ipi_lsync_id); +if (priv->ipi_id) +pr_info ("%pfwP: providing IPIs using interrupt %d\n" , + fwnode, priv->ipi_id); + +return 0 ; + +out_ipi_domain_cleanup: +imsic_ipi_domain_cleanup (priv); +out_ids_cleanup: +imsic_ids_cleanup (priv); +out_iounmap: +for (i =0 ; i < priv->num_mmios; i++) { +if (priv->mmios[i].va) +iounmap (priv->mmios[i].va); + } +kfree (priv->mmios); +out_free_priv: +kfree (priv); +return rc; +} + +static u32 __init imsic_dt_nr_parent_irq (struct fwnode_handle *fwnode, +void *fwopaque) +{ +return of_irq_count (to_of_node (fwnode)); +} + +static int __init imsic_dt_parent_hartid (struct fwnode_handle *fwnode, +void *fwopaque,u32 index, +unsigned long *out_hartid) +{ +struct of_phandle_args parent; +int rc; + + rc =of_irq_parse_one (to_of_node (fwnode), index, &parent); +if (rc) +return rc; + +/* +* Skip interrupts other than external interrupts for +* current privilege level. +*/ +if (parent.args[0 ] !=RV_IRQ_EXT ) +return -EINVAL ; + +return riscv_of_parent_hartid (parent.np, out_hartid); +} + +static u32 __init imsic_dt_nr_mmio (struct fwnode_handle *fwnode, +void *fwopaque) +{ +u32 ret =0 ; +struct resource res; + +while (!of_address_to_resource (to_of_node (fwnode), ret, &res)) + ret++; + +return ret; +} + +static int __init imsic_mmio_to_resource (struct fwnode_handle *fwnode, +void *fwopaque,u32 index, +struct resource *res) +{ +return of_address_to_resource (to_of_node (fwnode), index, res); +} + +static void __iomem __init *imsic_dt_mmio_map (struct fwnode_handle *fwnode, +void *fwopaque,u32 index) +{ +return of_iomap (to_of_node (fwnode), index); +} + +static int __init imsic_dt_read_u32 (struct fwnode_handle *fwnode, +void *fwopaque,const char *prop, +u32 *out_val) +{ +return of_property_read_u32 (to_of_node (fwnode), prop, out_val); +} + +static bool __init imsic_dt_read_bool (struct fwnode_handle *fwnode, +void *fwopaque,const char *prop) +{ +return of_property_read_bool (to_of_node (fwnode), prop); +} + +static int __init imsic_dt_init (struct device_node *node, +struct device_node *parent) +{ +struct imsic_fwnode_ops ops = { + .nr_parent_irq = imsic_dt_nr_parent_irq, + .parent_hartid = imsic_dt_parent_hartid, + .nr_mmio = imsic_dt_nr_mmio, + .mmio_to_resource = imsic_mmio_to_resource, + .mmio_map = imsic_dt_mmio_map, + .read_u32 = imsic_dt_read_u32, + .read_bool = imsic_dt_read_bool, + }; + +return imsic_init (&ops, &node->fwnode,NULL ); +} +IRQCHIP_DECLARE (riscv_imsic,"riscv,imsics" , imsic_dt_init);include/linux/irqchip/riscv-imsic.h new file +89
-0@@ -0,0 +1,92 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* +* Copyright (C) 2021 Western Digital Corporation or its affiliates. +* Copyright (C) 2022 Ventana Micro Systems Inc. +*/ +#ifndef __LINUX_IRQCHIP_RISCV_IMSIC_H +#define __LINUX_IRQCHIP_RISCV_IMSIC_H + +#include <linux/types.h> +#include <asm/csr.h> + +#define IMSIC_MMIO_PAGE_SHIFT 12 +#define IMSIC_MMIO_PAGE_SZ (1UL << IMSIC_MMIO_PAGE_SHIFT) +#define IMSIC_MMIO_PAGE_LE 0x00 +#define IMSIC_MMIO_PAGE_BE 0x04 + +#define IMSIC_MIN_ID 63 +#define IMSIC_MAX_ID 2048 + +#define IMSIC_EIDELIVERY 0x70 + +#define IMSIC_EITHRESHOLD 0x72 + +#define IMSIC_EIP0 0x80 +#define IMSIC_EIP63 0xbf +#define IMSIC_EIPx_BITS 32 + +#define IMSIC_EIE0 0xc0 +#define IMSIC_EIE63 0xff +#define IMSIC_EIEx_BITS 32 + +#define IMSIC_FIRST IMSIC_EIDELIVERY +#define IMSIC_LAST IMSIC_EIE63 + +#define IMSIC_MMIO_SETIPNUM_LE 0x00 +#define IMSIC_MMIO_SETIPNUM_BE 0x04 + +struct imsic_global_config { +/* +* MSI Target Address Scheme +* +* XLEN-1 12 0 +* | | | +* ------------------------------------------------------------- +* |xxxxxx|Group Index|xxxxxxxxxxx|HART Index|Guest Index| 0 | +* ------------------------------------------------------------- +*/ + +/* Bits representing Guest index, HART index, and Group index */ +u32 guest_index_bits; +u32 hart_index_bits; +u32 group_index_bits; +u32 group_index_shift; + +/* Global base address matching all target MSI addresses */ +phys_addr_t base_addr; + +/* Number of interrupt identities */ +u32 nr_ids; + +/* Number of guest interrupt identities */ +u32 nr_guest_ids; +}; + +struct imsic_local_config { +phys_addr_t msi_pa; +void __iomem *msi_va; +}; + +#ifdef CONFIG_RISCV_IMSIC + +extern const struct imsic_global_config *imsic_get_global_config (void ); + +extern const struct imsic_local_config *imsic_get_local_config ( +unsigned int cpu); + +#else + +static inline const struct imsic_global_config *imsic_get_global_config (void ) +{ +return NULL ; +} + +static inline const struct imsic_local_config *imsic_get_local_config ( +unsigned int cpu) +{ +return NULL ; +} +
Quoted 8 lines
include/linux/irqchip/riscv-imsic.h line 92
Quoted 3 lines
include/linux/irqchip/riscv-imsic.h new file +3
-0+#endif + +#endif _______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv
_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv
PATCH 6/9 dt-bindings: Add RISC-V advanced PLIC bindings
In reply to Anup PatelWe add DT bindings document for RISC-V advanced platform level interrupt controller (APLIC) defined by the RISC-V advanced interrupt architecture (AIA) specification.
--- .../interrupt-controller/riscv,aplic.yaml | 136 ++++++++++++++++++ 1 file changed, 136 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +136 -0
@@ -0,0 +1,136 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/riscv,aplic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RISC-V Advancded Platform Level Interrupt Controller (APLIC) + +maintainers: + - Anup Patel <[email protected]> + +description: + The RISC-V advanced interrupt architecture (AIA) defines advanced platform + level interrupt controller (APLIC) for handling wired interrupts in a + RISC-V platform. The RISC-V AIA specification can be found at + https://github.com/riscv/riscv-aia. + + The RISC-V APLIC is implemented as hierarchical APLIC domains where all + interrupt sources connect to the root domain which can further delegate + interrupts to child domains. We have one device tree node for each APLIC + domain. + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + compatible: + items: + - enum: + - vendor,chip-aplic + - const: riscv,aplic + + reg: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + interrupts-extended: + minItems: 1 + maxItems: 16384 + description: + The presence of this property implies that given APLIC domain directly + injects external interrupts to a set of RISC-V HARTS (or CPUs). Each + node pointed to should be a riscv,cpu-intc node, which has a riscv node + (i.e. RISC-V HART) as parent. + + msi-parent: + description: + The presence of this property implies that given APLIC domain forwards + wired interrupts as MSIs to a AIA incoming message signaled interrupt + controller (IMSIC). This property should be considered only when the + interrupts-extended property is absent. + + riscv,num-sources: + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 1 + maximum: 1023 + description: + Specifies how many wired interrupts are supported by this APLIC domain. + + riscv,children: + $ref: '/schemas/types.yaml#/definitions/phandle-array' + minItems: 1 + maxItems: 1024 + description: + This property represents a list of child APLIC domains for the given + APLIC domain. Each child APLIC domain is assigned child index in + increasing order with the first child APLIC domain assigned child + index 0. The APLIC domain child index is used by firmware to delegate + interrupts from the given APLIC domain to a particular child APLIC + domain. + + riscv,delegate: + $ref: '/schemas/types.yaml#/definitions/phandle-array' + minItems: 1 + maxItems: 1024 + description: + This property represents a interrupt delegation list where each entry + is a triple consisting of child APLIC domain phandle, first interrupt + number, and last interrupt number. The firmware will configure interrupt + delegation registers based on interrupt delegation list. + +additionalProperties: false + +required: + - compatible + - reg + - interrupt-controller + - "#interrupt-cells" + - riscv,num-sources + +examples: + - | + // Example 1 (APIC domain directly injecting interrupt to HARTs): + + aplic0: interrupt-controller@c000000 { + compatible = "vendor,chip-aplic", "riscv,aplic"; + interrupts-extended = <&cpu1_intc 11>, + <&cpu2_intc 11>, + <&cpu3_intc 11>, + <&cpu4_intc 11>; + reg = <0xc000000 0x4080>; + interrupt-controller; + #interrupt-cells = <2>; + riscv,num-sources = <63>; + riscv,children = <&aplic1>; + riscv,delegate = <&aplic1 1 63>; + }; + + aplic1: interrupt-controller@d000000 { + compatible = "vendor,chip-aplic", "riscv,aplic"; + interrupts-extended = <&cpu1_intc 9>, + <&cpu2_intc 9>, + <&cpu3_intc 9>, + <&cpu4_intc 9>; + reg = <0xd000000 0x4080>; + interrupt-controller; + #interrupt-cells = <2>; + riscv,num-sources = <63>; + }; + + - | + // Example 2 (APIC domain forwarding interrupts as MSIs): + + interrupt-controller@d000000 { + compatible = "vendor,chip-aplic", "riscv,aplic"; + msi-parent = <&imsics>; + reg = <0xd000000 0x4000>; + interrupt-controller; + #interrupt-cells = <2>; + riscv,num-sources = <63>; + }; +...
Signature · 7 lines
2.34.1 _______________________________________________ linux-riscv mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-riscv
Re: [PATCH 6/9] dt-bindings: Add RISC-V advanced PLIC bindings
Hey Anup,
Ditto the $subject nit here.
Quoted 16 lines · Anup Patel
We add DT bindings document for RISC-V advanced platform level interrupt controller (APLIC) defined by the RISC-V advanced interrupt architecture (AIA) specification.
Signed-off-by Anup Patel <[email protected]>--- .../interrupt-controller/riscv,aplic.yaml | 136 ++++++++++++++++++ 1 file changed, 136 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yamlDocumentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +0
-0
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml line 7
Quoted 7 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +7
-0@@ -0,0 +1,136 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/riscv,aplic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RISC-V Advancded Platform Level Interrupt Controller (APLIC)
Typo: Advanced
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml line 13
Quoted 6 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +6
-0+ +maintainers: + - Anup Patel <[email protected]> + +description: + The RISC-V advanced interrupt architecture (AIA) defines advanced platform
^
Missing an article here?
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml line 20
Quoted 7 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +7
-0+ level interrupt controller (APLIC) for handling wired interrupts in a + RISC-V platform. The RISC-V AIA specification can be found at + https://github.com/riscv/riscv-aia. + + The RISC-V APLIC is implemented as hierarchical APLIC domains where all + interrupt sources connect to the root domain which can further delegate + interrupts to child domains. We have one device tree node for each APLIC
While I am nitpicking, s/We have/There is/ ?
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml line 30
Quoted 10 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +10
-0+ domain. + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + compatible: + items: + - enum: + - vendor,chip-aplic
Same comment here about the validity of this placeholder.
Quoted 5 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +5
-0+ - const: riscv,aplic + + reg: + maxItems: 1 +
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml line 45
Quoted 10 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +10
-0+ interrupt-controller: true + + "#interrupt-cells": + const: 2 + + interrupts-extended: + minItems: 1 + maxItems: 16384 + description: + The presence of this property implies that given APLIC domain directly
^
Missing indefinite article here (and in msi-parent)?
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml line 55
Quoted 10 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +10
-0+ injects external interrupts to a set of RISC-V HARTS (or CPUs). Each + node pointed to should be a riscv,cpu-intc node, which has a riscv node + (i.e. RISC-V HART) as parent. + + msi-parent: + description: + The presence of this property implies that given APLIC domain forwards + wired interrupts as MSIs to a AIA incoming message signaled interrupt + controller (IMSIC). This property should be considered only when the + interrupts-extended property is absent.
This mutual exclusion can be represented, can't it? IIRC it is some sort of oneOf thing, somewhat like below:
oneOf:
- required:
- msi-parent
- required:
- interrupts-extended
AFAIR from doing the i2c ocores binding, this will force the addition of one, but not both, to a node.
Or is this not actually mutually exclusive & the msi-parent property is permitted but just left unused if interrupts-extended is present?
Quoted 18 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +18
-0+ riscv,num-sources: + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 1 + maximum: 1023 + description: + Specifies how many wired interrupts are supported by this APLIC domain. + + riscv,children: + $ref: '/schemas/types.yaml#/definitions/phandle-array' + minItems: 1 + maxItems: 1024 + description: + This property represents a list of child APLIC domains for the given + APLIC domain. Each child APLIC domain is assigned child index in + increasing order with the first child APLIC domain assigned child + index 0. The APLIC domain child index is used by firmware to delegate + interrupts from the given APLIC domain to a particular child APLIC + domain.
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml line 84
Quoted 10 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +10
-0+ + riscv,delegate: + $ref: '/schemas/types.yaml#/definitions/phandle-array' + minItems: 1 + maxItems: 1024 + description: + This property represents a interrupt delegation list where each entry + is a triple consisting of child APLIC domain phandle, first interrupt + number, and last interrupt number. The firmware will configure interrupt + delegation registers based on interrupt delegation list.
What is the inter dependence of the children and delegate? Is it valid to have a delegate property without children? Can the firmware delegate interrupts without the delegation list, based on the children property alone? Or is it effectively useless without a children property?
In your examples, the second has msi-parent but neither of these custom properties. Do the children/delegate properties have a meaning in the msi-parent case?
I think the binding should enforce whatever dependency exists there. Thanks,
Conor.
Quoted 60 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +52
-0+ +additionalProperties: false + +required: + - compatible + - reg + - interrupt-controller + - "#interrupt-cells" + - riscv,num-sources + +examples: + - | + // Example 1 (APIC domain directly injecting interrupt to HARTs): + + aplic0: interrupt-controller@c000000 { + compatible = "vendor,chip-aplic", "riscv,aplic"; + interrupts-extended = <&cpu1_intc 11>, + <&cpu2_intc 11>, + <&cpu3_intc 11>, + <&cpu4_intc 11>; + reg = <0xc000000 0x4080>; + interrupt-controller; + #interrupt-cells = <2>; + riscv,num-sources = <63>; + riscv,children = <&aplic1>; + riscv,delegate = <&aplic1 1 63>; + }; + + aplic1: interrupt-controller@d000000 { + compatible = "vendor,chip-aplic", "riscv,aplic"; + interrupts-extended = <&cpu1_intc 9>, + <&cpu2_intc 9>, + <&cpu3_intc 9>, + <&cpu4_intc 9>; + reg = <0xd000000 0x4080>; + interrupt-controller; + #interrupt-cells = <2>; + riscv,num-sources = <63>; + }; + + - | + // Example 2 (APIC domain forwarding interrupts as MSIs): + + interrupt-controller@d000000 { + compatible = "vendor,chip-aplic", "riscv,aplic"; + msi-parent = <&imsics>; + reg = <0xd000000 0x4000>; + interrupt-controller; + #interrupt-cells = <2>; + riscv,num-sources = <63>; + }; +...Signature · 7 lines
2.34.1 _______________________________________________ linux-riscv mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-riscv
Anup Patel
maintainerRe: [PATCH 6/9] dt-bindings: Add RISC-V advanced PLIC bindings
Quoted 4 lines · Conor Dooley
Hey Anup,
Ditto the $subject nit here.
Adding "interrupt-controller:" to subject makes it longer than 80 characters.
Quoted 12 lines · Anup Patel
Quoted 10 lines
We add DT bindings document for RISC-V advanced platform level interrupt controller (APLIC) defined by the RISC-V advanced interrupt architecture (AIA) specification.
Signed-off-by Anup Patel <[email protected]>--- .../interrupt-controller/riscv,aplic.yaml | 136 ++++++++++++++++++ 1 file changed, 136 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml
Quoted 15 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml line 7
Quoted 13 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +7
-0@@ -0,0 +1,136 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/riscv,aplic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RISC-V Advancded Platform Level Interrupt Controller (APLIC)Typo: Advanced
Okay, I will update.
Quoted 9 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml line 13
Quoted 7 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +6
-0+ +maintainers: + - Anup Patel <[email protected]> + +description: + The RISC-V advanced interrupt architecture (AIA) defines advanced platform^Missing an article here?
Okay, I will update.
Quoted 10 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml line 20
Quoted 8 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +7
-0+ level interrupt controller (APLIC) for handling wired interrupts in a + RISC-V platform. The RISC-V AIA specification can be found at + https://github.com/riscv/riscv-aia. + + The RISC-V APLIC is implemented as hierarchical APLIC domains where all + interrupt sources connect to the root domain which can further delegate + interrupts to child domains. We have one device tree node for each APLICWhile I am nitpicking, s/We have/There is/ ?
Okay, I will update.
Quoted 13 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml line 30
Quoted 11 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +10
-0+ domain. + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + compatible: + items: + - enum: + - vendor,chip-aplicSame comment here about the validity of this placeholder.
Okay, I will add "riscv,qemu-aplic" as QEMU specific compatible string.
Quoted 38 lines
Quoted 6 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +5
-0+ - const: riscv,aplic + + reg: + maxItems: 1 +Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml line 45
Quoted 10 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +10
-0+ interrupt-controller: true + + "#interrupt-cells": + const: 2 + + interrupts-extended: + minItems: 1 + maxItems: 16384 + description: + The presence of this property implies that given APLIC domain directly^Missing indefinite article here (and in msi-parent)?
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml line 55
Quoted 10 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +10
-0+ injects external interrupts to a set of RISC-V HARTS (or CPUs). Each + node pointed to should be a riscv,cpu-intc node, which has a riscv node + (i.e. RISC-V HART) as parent. + + msi-parent: + description: + The presence of this property implies that given APLIC domain forwards + wired interrupts as MSIs to a AIA incoming message signaled interrupt + controller (IMSIC). This property should be considered only when the + interrupts-extended property is absent.This mutual exclusion can be represented, can't it? IIRC it is some sort of oneOf thing, somewhat like below:
oneOf:
- required:
- msi-parent
- required:
- interrupts-extended
Quoted 5 lines
AFAIR from doing the i2c ocores binding, this will force the addition of one, but not both, to a node.
Or is this not actually mutually exclusive & the msi-parent property is permitted but just left unused if interrupts-extended is present?
If both are present then interrupts-extended is preferred.
Quoted 27 lines
Quoted 27 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +26
-0+ riscv,num-sources: + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 1 + maximum: 1023 + description: + Specifies how many wired interrupts are supported by this APLIC domain. + + riscv,children: + $ref: '/schemas/types.yaml#/definitions/phandle-array' + minItems: 1 + maxItems: 1024 + description: + This property represents a list of child APLIC domains for the given + APLIC domain. Each child APLIC domain is assigned child index in + increasing order with the first child APLIC domain assigned child + index 0. The APLIC domain child index is used by firmware to delegate + interrupts from the given APLIC domain to a particular child APLIC + domain. + + riscv,delegate: + $ref: '/schemas/types.yaml#/definitions/phandle-array' + minItems: 1 + maxItems: 1024 + description: + This property represents a interrupt delegation list where each entry + is a triple consisting of child APLIC domain phandle, first interrupt
Quoted 8 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml line 84
Quoted 2 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +2
-0+ number, and last interrupt number. The firmware will configure interrupt + delegation registers based on interrupt delegation list.What is the inter dependence of the children and delegate? Is it valid to have a delegate property without children? Can the firmware delegate interrupts without the delegation list, based on the children property alone? Or is it effectively useless without a children property?
Both properties convey different information. The "riscv,childen" describes the association of child indexes with child APLIC domains whereas the "riscv,delegate" describes the interrupt delegation to few of the child APLIC domains.
Quoted 4 lines
In your examples, the second has msi-parent but neither of these custom properties. Do the children/delegate properties have a meaning in the msi-parent case?
The "riscv,childern" and "riscv,delegate" are only useful when we have hierarchy of multiple APLIC domains. The second example only has one APLIC domain hence these custom properties are absent.
Quoted 61 lines
I think the binding should enforce whatever dependency exists there. Thanks,
Conor.Quoted 56 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +52
-1+ +additionalProperties: false + +required: + - compatible + - reg + - interrupt-controller + - "#interrupt-cells" + - riscv,num-sources + +examples: + - | + // Example 1 (APIC domain directly injecting interrupt to HARTs): + + aplic0: interrupt-controller@c000000 { + compatible = "vendor,chip-aplic", "riscv,aplic"; + interrupts-extended = <&cpu1_intc 11>, + <&cpu2_intc 11>, + <&cpu3_intc 11>, + <&cpu4_intc 11>; + reg = <0xc000000 0x4080>; + interrupt-controller; + #interrupt-cells = <2>; + riscv,num-sources = <63>; + riscv,children = <&aplic1>; + riscv,delegate = <&aplic1 1 63>; + }; + + aplic1: interrupt-controller@d000000 { + compatible = "vendor,chip-aplic", "riscv,aplic"; + interrupts-extended = <&cpu1_intc 9>, + <&cpu2_intc 9>, + <&cpu3_intc 9>, + <&cpu4_intc 9>; + reg = <0xd000000 0x4080>; + interrupt-controller; + #interrupt-cells = <2>; + riscv,num-sources = <63>; + }; + + - | + // Example 2 (APIC domain forwarding interrupts as MSIs): + + interrupt-controller@d000000 { + compatible = "vendor,chip-aplic", "riscv,aplic"; + msi-parent = <&imsics>; + reg = <0xd000000 0x4000>; + interrupt-controller; + #interrupt-cells = <2>; + riscv,num-sources = <63>; + }; +... --2.34.1
Quoted 4 lines
Quoted 4 lines
_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv
Regards,
Anup
Re: [PATCH 6/9] dt-bindings: Add RISC-V advanced PLIC bindings
Quoted 15 lines · Anup Patel
Quoted 4 lines · Conor Dooley
Quoted 4 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +4
-0+ domain. + +allOf: + - $ref: /schemas/interrupt-controller.yaml#Quoted 8 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml line 30
Quoted 6 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +6
-0+ +properties: + compatible: + items: + - enum: + - vendor,chip-aplicSame comment here about the validity of this placeholder.
Quoted 1 line
Okay, I will add "riscv,qemu-aplic" as QEMU specific compatible string.
Ah neat. I think that's a fair compromise.
Quoted 17 lines
Quoted 17 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml line 55
Quoted 8 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +7
-0+ - const: riscv,aplic + msi-parent: + description: + The presence of this property implies that given APLIC domain forwards + wired interrupts as MSIs to a AIA incoming message signaled interrupt + controller (IMSIC). This property should be considered only when the + interrupts-extended property is absent.This mutual exclusion can be represented, can't it? IIRC it is some sort of oneOf thing, somewhat like below:
oneOf:
- required:
- msi-parent
- required:
- interrupts-extended
Quoted 7 lines
Quoted 5 lines
AFAIR from doing the i2c ocores binding, this will force the addition of one, but not both, to a node.
Or is this not actually mutually exclusive & the msi-parent property is permitted but just left unused if interrupts-extended is present?
If both are present then interrupts-extended is preferred.
Perhaps I am making a fool of myself here, but why would someone include both of them at once, if only one is going to be used?
It would appear that making them explicitly mutually exclusive would make the binding easier to understand.
What am I missing?
Quoted 35 lines
Quoted 22 lines
Quoted 11 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +11
-0+ riscv,children: + $ref: '/schemas/types.yaml#/definitions/phandle-array' + minItems: 1 + maxItems: 1024 + description: + This property represents a list of child APLIC domains for the given + APLIC domain. Each child APLIC domain is assigned child index in + increasing order with the first child APLIC domain assigned child + index 0. The APLIC domain child index is used by firmware to delegate + interrupts from the given APLIC domain to a particular child APLIC + domain.Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml line 84
Quoted 10 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +10
-0+ + riscv,delegate: + $ref: '/schemas/types.yaml#/definitions/phandle-array' + minItems: 1 + maxItems: 1024 + description: + This property represents a interrupt delegation list where each entry + is a triple consisting of child APLIC domain phandle, first interrupt + number, and last interrupt number. The firmware will configure interrupt + delegation registers based on interrupt delegation list.Quoted 5 lines
What is the inter dependence of the children and delegate? Is it valid to have a delegate property without children? Can the firmware delegate interrupts without the delegation list, based on the children property alone? Or is it effectively useless without a children property?
Both properties convey different information. The "riscv,childen" describes the association of child indexes with child APLIC domains whereas the "riscv,delegate" describes the interrupt delegation to few of the child APLIC domains.
Quoted 1 line
Quoted 7 lines
Quoted 3 lines
In your examples, the second has msi-parent but neither of these custom properties. Do the children/delegate properties have a meaning in the msi-parent case?
The "riscv,childern" and "riscv,delegate" are only useful when we have hierarchy of multiple APLIC domains. The second example only has one APLIC domain hence these custom properties are absent.
It'd be great if you could include an example that explains the difference as, IIRC, both Rob and I both were kinda confused as to how the properties differ.
Thanks,
Conor.
Re: [PATCH 6/9] dt-bindings: Add RISC-V advanced PLIC bindings
Quoted 44 lines · Conor Dooley
Quoted 15 lines · Anup Patel
Quoted 4 lines · Conor Dooley
Quoted 4 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +4
-0+ domain. + +allOf: + - $ref: /schemas/interrupt-controller.yaml#Quoted 8 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml line 30
Quoted 6 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +6
-0+ +properties: + compatible: + items: + - enum: + - vendor,chip-aplicSame comment here about the validity of this placeholder.
Quoted 1 line
Okay, I will add "riscv,qemu-aplic" as QEMU specific compatible string.
Ah neat. I think that's a fair compromise.
Quoted 23 lines
Quoted 22 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml line 55
Quoted 8 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +7
-0+ - const: riscv,aplic + msi-parent: + description: + The presence of this property implies that given APLIC domain forwards + wired interrupts as MSIs to a AIA incoming message signaled interrupt + controller (IMSIC). This property should be considered only when the + interrupts-extended property is absent.This mutual exclusion can be represented, can't it? IIRC it is some sort of oneOf thing, somewhat like below:
oneOf:
- required:
- msi-parent
- required:
- interrupts-extendedAFAIR from doing the i2c ocores binding, this will force the addition of one, but not both, to a node.
Or is this not actually mutually exclusive & the msi-parent property is permitted but just left unused if interrupts-extended is present?
Quoted 7 lines
Quoted 1 line
If both are present then interrupts-extended is preferred.
Perhaps I am making a fool of myself here, but why would someone include both of them at once, if only one is going to be used?
It would appear that making them explicitly mutually exclusive would make the binding easier to understand.
What am I missing?
If both "interrupts-extended" and "msi-parent" are present then it means the APLIC domain supports both MSI mode and Direct mode in HW. In this case, the APLIC driver has to choose between MSI mode or Direct mode.
Quoted 40 lines
Quoted 40 lines
Quoted 23 lines
Quoted 12 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +11
-0+ riscv,children: + $ref: '/schemas/types.yaml#/definitions/phandle-array' + minItems: 1 + maxItems: 1024 + description: + This property represents a list of child APLIC domains for the given + APLIC domain. Each child APLIC domain is assigned child index in + increasing order with the first child APLIC domain assigned child + index 0. The APLIC domain child index is used by firmware to delegate + interrupts from the given APLIC domain to a particular child APLIC + domain.Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml line 84
Quoted 10 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +10
-0+ + riscv,delegate: + $ref: '/schemas/types.yaml#/definitions/phandle-array' + minItems: 1 + maxItems: 1024 + description: + This property represents a interrupt delegation list where each entry + is a triple consisting of child APLIC domain phandle, first interrupt + number, and last interrupt number. The firmware will configure interrupt + delegation registers based on interrupt delegation list.Quoted 5 lines
What is the inter dependence of the children and delegate? Is it valid to have a delegate property without children? Can the firmware delegate interrupts without the delegation list, based on the children property alone? Or is it effectively useless without a children property?
Both properties convey different information. The "riscv,childen" describes the association of child indexes with child APLIC domains whereas the "riscv,delegate" describes the interrupt delegation to few of the child APLIC domains.
Quoted 4 lines
In your examples, the second has msi-parent but neither of these custom properties. Do the children/delegate properties have a meaning in the msi-parent case?
Quoted 7 lines
Quoted 3 lines
The "riscv,childern" and "riscv,delegate" are only useful when we have hierarchy of multiple APLIC domains. The second example only has one APLIC domain hence these custom properties are absent.
It'd be great if you could include an example that explains the difference as, IIRC, both Rob and I both were kinda confused as to how the properties differ.
Okay, I will try to improve the examples.
Regards,
Anup
Re: [PATCH 6/9] dt-bindings: Add RISC-V advanced PLIC bindings
In reply to Anup PatelQuoted 7 lines · Anup Patel
Quoted 4 lines · Conor Dooley
Hey Anup,
Ditto the $subject nit here.
Adding "interrupt-controller:" to subject makes it longer than 80 characters.
Because you added redundant double "bindings". Subject line is precious, so do not add useless words.
Best regards,
Krzysztof
Re: [PATCH 6/9] dt-bindings: Add RISC-V advanced PLIC bindings
Quoted 4 lines · Krzysztof Kozlowski
Quoted 2 lines · Anup Patel
Quoted 1 line · Conor Dooley
Quoted 8 lines
Quoted 5 lines
Quoted 3 lines
Hey Anup,
Ditto the $subject nit here.
Adding "interrupt-controller:" to subject makes it longer than 80 characters.
Because you added redundant double "bindings". Subject line is precious, so do not add useless words.
Okay, I will update the patch subject based on your suggestion.
Regards,
Anup
Re: [PATCH 6/9] dt-bindings: Add RISC-V advanced PLIC bindings
In reply to Anup PatelQuoted 58 lines · Anup Patel
We add DT bindings document for RISC-V advanced platform level interrupt controller (APLIC) defined by the RISC-V advanced interrupt architecture (AIA) specification.
Signed-off-by Anup Patel <[email protected]>--- .../interrupt-controller/riscv,aplic.yaml | 136 ++++++++++++++++++ 1 file changed, 136 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yamlDocumentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +42
-0@@ -0,0 +1,136 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/riscv,aplic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RISC-V Advancded Platform Level Interrupt Controller (APLIC) + +maintainers: + - Anup Patel <[email protected]> + +description: + The RISC-V advanced interrupt architecture (AIA) defines advanced platform + level interrupt controller (APLIC) for handling wired interrupts in a + RISC-V platform. The RISC-V AIA specification can be found at + https://github.com/riscv/riscv-aia. + + The RISC-V APLIC is implemented as hierarchical APLIC domains where all + interrupt sources connect to the root domain which can further delegate + interrupts to child domains. We have one device tree node for each APLIC + domain. + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + compatible: + items: + - enum: + - vendor,chip-aplic + - const: riscv,aplic + + reg: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + interrupts-extended: + minItems: 1
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml line 52
Quoted 10 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +10
-0+ maxItems: 16384 + description: + The presence of this property implies that given APLIC domain directly + injects external interrupts to a set of RISC-V HARTS (or CPUs). Each + node pointed to should be a riscv,cpu-intc node, which has a riscv node + (i.e. RISC-V HART) as parent. + + msi-parent: + description: + The presence of this property implies that given APLIC domain forwards
Drop "The presence of this property" and make it a proper sentence describing hardware.
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml line 58
Quoted 6 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +6
-0+ wired interrupts as MSIs to a AIA incoming message signaled interrupt + controller (IMSIC). This property should be considered only when the + interrupts-extended property is absent. + + riscv,num-sources: + $ref: "/schemas/types.yaml#/definitions/uint32"
Drop quotes.
Quoted 13 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +13
-0+ minimum: 1 + maximum: 1023 + description: + Specifies how many wired interrupts are supported by this APLIC domain. + + riscv,children: + $ref: '/schemas/types.yaml#/definitions/phandle-array' + minItems: 1 + maxItems: 1024 + description: + This property represents a list of child APLIC domains for the given + APLIC domain. Each child APLIC domain is assigned child index in + increasing order with the first child APLIC domain assigned child
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml line 81
Quoted 10 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +10
-0+ index 0. The APLIC domain child index is used by firmware to delegate + interrupts from the given APLIC domain to a particular child APLIC + domain. + + riscv,delegate: + $ref: '/schemas/types.yaml#/definitions/phandle-array' + minItems: 1 + maxItems: 1024 + description: + This property represents a interrupt delegation list where each entry
Drop "This property represents".
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml line 86
Quoted 5 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +5
-0+ is a triple consisting of child APLIC domain phandle, first interrupt + number, and last interrupt number. The firmware will configure interrupt + delegation registers based on interrupt delegation list. + +additionalProperties: false
Same comments as in previous patch,
Quoted 38 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +38
-0+ +required: + - compatible + - reg + - interrupt-controller + - "#interrupt-cells" + - riscv,num-sources + +examples: + - | + // Example 1 (APIC domain directly injecting interrupt to HARTs): + + aplic0: interrupt-controller@c000000 { + compatible = "vendor,chip-aplic", "riscv,aplic"; + interrupts-extended = <&cpu1_intc 11>, + <&cpu2_intc 11>, + <&cpu3_intc 11>, + <&cpu4_intc 11>; + reg = <0xc000000 0x4080>; + interrupt-controller; + #interrupt-cells = <2>; + riscv,num-sources = <63>; + riscv,children = <&aplic1>; + riscv,delegate = <&aplic1 1 63>; + }; + + aplic1: interrupt-controller@d000000 { + compatible = "vendor,chip-aplic", "riscv,aplic"; + interrupts-extended = <&cpu1_intc 9>, + <&cpu2_intc 9>, + <&cpu3_intc 9>, + <&cpu4_intc 9>; + reg = <0xd000000 0x4080>; + interrupt-controller; + #interrupt-cells = <2>; + riscv,num-sources = <63>; + }; +
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml line 134
Quoted 10 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +10
-0+ - | + // Example 2 (APIC domain forwarding interrupts as MSIs): + + interrupt-controller@d000000 { + compatible = "vendor,chip-aplic", "riscv,aplic"; + msi-parent = <&imsics>; + reg = <0xd000000 0x4000>; + interrupt-controller; + #interrupt-cells = <2>; + riscv,num-sources = <63>;
It's almost the same as previous... don't add unnecessary examples (difference in one property usually does not mean you need new example).
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml line 136
Quoted 2 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +2
-0+ }; +...
Best regards,
Krzysztof
_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv
Re: [PATCH 6/9] dt-bindings: Add RISC-V advanced PLIC bindings
Quoted 65 lines · Krzysztof Kozlowski
Quoted 63 lines · Anup Patel
We add DT bindings document for RISC-V advanced platform level interrupt controller (APLIC) defined by the RISC-V advanced interrupt architecture (AIA) specification.
Signed-off-by Anup Patel <[email protected]>--- .../interrupt-controller/riscv,aplic.yaml | 136 ++++++++++++++++++ 1 file changed, 136 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yamlDocumentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +47
-0@@ -0,0 +1,136 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/riscv,aplic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RISC-V Advancded Platform Level Interrupt Controller (APLIC) + +maintainers: + - Anup Patel <[email protected]> + +description: + The RISC-V advanced interrupt architecture (AIA) defines advanced platform + level interrupt controller (APLIC) for handling wired interrupts in a + RISC-V platform. The RISC-V AIA specification can be found at + https://github.com/riscv/riscv-aia. + + The RISC-V APLIC is implemented as hierarchical APLIC domains where all + interrupt sources connect to the root domain which can further delegate + interrupts to child domains. We have one device tree node for each APLIC + domain. + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + compatible: + items: + - enum: + - vendor,chip-aplic + - const: riscv,aplic + + reg: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + interrupts-extended: + minItems: 1 + maxItems: 16384 + description: + The presence of this property implies that given APLIC domain directly + injects external interrupts to a set of RISC-V HARTS (or CPUs). Each + node pointed to should be a riscv,cpu-intc node, which has a riscv node
Quoted 8 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml line 52
Quoted 5 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +5
-0+ (i.e. RISC-V HART) as parent. + + msi-parent: + description: + The presence of this property implies that given APLIC domain forwardsDrop "The presence of this property" and make it a proper sentence describing hardware.
Okay, I will update.
Quoted 9 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml line 58
Quoted 7 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +6
-0+ wired interrupts as MSIs to a AIA incoming message signaled interrupt + controller (IMSIC). This property should be considered only when the + interrupts-extended property is absent. + + riscv,num-sources: + $ref: "/schemas/types.yaml#/definitions/uint32"Drop quotes.
Okay, I will update.
Quoted 18 lines
Quoted 18 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +17
-0+ minimum: 1 + maximum: 1023 + description: + Specifies how many wired interrupts are supported by this APLIC domain. + + riscv,children: + $ref: '/schemas/types.yaml#/definitions/phandle-array' + minItems: 1 + maxItems: 1024 + description: + This property represents a list of child APLIC domains for the given + APLIC domain. Each child APLIC domain is assigned child index in + increasing order with the first child APLIC domain assigned child + index 0. The APLIC domain child index is used by firmware to delegate + interrupts from the given APLIC domain to a particular child APLIC + domain. +
Quoted 8 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml line 81
Quoted 6 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +6
-0+ riscv,delegate: + $ref: '/schemas/types.yaml#/definitions/phandle-array' + minItems: 1 + maxItems: 1024 + description: + This property represents a interrupt delegation list where each entryDrop "This property represents".
Okay, I will update.
Quoted 8 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml line 86
Quoted 6 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +5
-0+ is a triple consisting of child APLIC domain phandle, first interrupt + number, and last interrupt number. The firmware will configure interrupt + delegation registers based on interrupt delegation list. + +additionalProperties: falseSame comments as in previous patch,
Okay, I will update.
Quoted 44 lines
Quoted 44 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +43
-0+ +required: + - compatible + - reg + - interrupt-controller + - "#interrupt-cells" + - riscv,num-sources + +examples: + - | + // Example 1 (APIC domain directly injecting interrupt to HARTs): + + aplic0: interrupt-controller@c000000 { + compatible = "vendor,chip-aplic", "riscv,aplic"; + interrupts-extended = <&cpu1_intc 11>, + <&cpu2_intc 11>, + <&cpu3_intc 11>, + <&cpu4_intc 11>; + reg = <0xc000000 0x4080>; + interrupt-controller; + #interrupt-cells = <2>; + riscv,num-sources = <63>; + riscv,children = <&aplic1>; + riscv,delegate = <&aplic1 1 63>; + }; + + aplic1: interrupt-controller@d000000 { + compatible = "vendor,chip-aplic", "riscv,aplic"; + interrupts-extended = <&cpu1_intc 9>, + <&cpu2_intc 9>, + <&cpu3_intc 9>, + <&cpu4_intc 9>; + reg = <0xd000000 0x4080>; + interrupt-controller; + #interrupt-cells = <2>; + riscv,num-sources = <63>; + }; + + - | + // Example 2 (APIC domain forwarding interrupts as MSIs): + + interrupt-controller@d000000 { + compatible = "vendor,chip-aplic", "riscv,aplic";
Quoted 8 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml line 134
Quoted 5 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +5
-0+ msi-parent = <&imsics>; + reg = <0xd000000 0x4000>; + interrupt-controller; + #interrupt-cells = <2>; + riscv,num-sources = <63>;It's almost the same as previous... don't add unnecessary examples (difference in one property usually does not mean you need new example).
The second example shows the DT node of an APLIC in MSI-mode. Most noteworthy part of this node is presence of "msi-parent" DT property instead of "interrupts-extended" DT property to describe an APLIC in MSI mode.
Quoted 4 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml line 136
Quoted 3 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +2
-0+ }; +...
Best Regards,
Anup
Rob Herring
maintainerRe: [PATCH 6/9] dt-bindings: Add RISC-V advanced PLIC bindings
In reply to Anup PatelQuoted 73 lines · Anup Patel
We add DT bindings document for RISC-V advanced platform level interrupt controller (APLIC) defined by the RISC-V advanced interrupt architecture (AIA) specification.
Signed-off-by Anup Patel <[email protected]>--- .../interrupt-controller/riscv,aplic.yaml | 136 ++++++++++++++++++ 1 file changed, 136 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yamlDocumentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +57
-0@@ -0,0 +1,136 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/riscv,aplic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RISC-V Advancded Platform Level Interrupt Controller (APLIC) + +maintainers: + - Anup Patel <[email protected]> + +description: + The RISC-V advanced interrupt architecture (AIA) defines advanced platform + level interrupt controller (APLIC) for handling wired interrupts in a + RISC-V platform. The RISC-V AIA specification can be found at + https://github.com/riscv/riscv-aia. + + The RISC-V APLIC is implemented as hierarchical APLIC domains where all + interrupt sources connect to the root domain which can further delegate + interrupts to child domains. We have one device tree node for each APLIC + domain. + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + compatible: + items: + - enum: + - vendor,chip-aplic + - const: riscv,aplic + + reg: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + interrupts-extended: + minItems: 1 + maxItems: 16384 + description: + The presence of this property implies that given APLIC domain directly + injects external interrupts to a set of RISC-V HARTS (or CPUs). Each + node pointed to should be a riscv,cpu-intc node, which has a riscv node + (i.e. RISC-V HART) as parent. + + msi-parent: + description: + The presence of this property implies that given APLIC domain forwards + wired interrupts as MSIs to a AIA incoming message signaled interrupt + controller (IMSIC). This property should be considered only when the + interrupts-extended property is absent. + + riscv,num-sources:
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml line 67
Quoted 10 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +10
-0+ $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 1 + maximum: 1023 + description: + Specifies how many wired interrupts are supported by this APLIC domain. + + riscv,children: + $ref: '/schemas/types.yaml#/definitions/phandle-array' + minItems: 1 + maxItems: 1024
As each entry is a single phandle:
items:
maxItems: 1
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml line 79
Quoted 12 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +12
-0+ description: + This property represents a list of child APLIC domains for the given + APLIC domain. Each child APLIC domain is assigned child index in + increasing order with the first child APLIC domain assigned child + index 0. The APLIC domain child index is used by firmware to delegate + interrupts from the given APLIC domain to a particular child APLIC + domain. + + riscv,delegate: + $ref: '/schemas/types.yaml#/definitions/phandle-array' + minItems: 1 + maxItems: 1024
items:
items:
- description: child APLIC domain phandle
- description: ...
- description: ...
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml line 84
Quoted 5 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +5
-0+ description: + This property represents a interrupt delegation list where each entry + is a triple consisting of child APLIC domain phandle, first interrupt + number, and last interrupt number. The firmware will configure interrupt + delegation registers based on interrupt delegation list.
First and last are inclusive?
Couldn't riscv,children and riscv,delegate be combined? How would they be different? If some children don't have any delegated interrupts, you could use -1 for the cells for example.
An example showing the need would be nice.
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml line 97
Quoted 13 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +13
-0+ +additionalProperties: false + +required: + - compatible + - reg + - interrupt-controller + - "#interrupt-cells" + - riscv,num-sources + +examples: + - | + // Example 1 (APIC domain directly injecting interrupt to HARTs):
Is than an x86 APIC or a typo?
Quoted 43 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +39
-0+ + aplic0: interrupt-controller@c000000 { + compatible = "vendor,chip-aplic", "riscv,aplic"; + interrupts-extended = <&cpu1_intc 11>, + <&cpu2_intc 11>, + <&cpu3_intc 11>, + <&cpu4_intc 11>; + reg = <0xc000000 0x4080>; + interrupt-controller; + #interrupt-cells = <2>; + riscv,num-sources = <63>; + riscv,children = <&aplic1>; + riscv,delegate = <&aplic1 1 63>; + }; + + aplic1: interrupt-controller@d000000 { + compatible = "vendor,chip-aplic", "riscv,aplic"; + interrupts-extended = <&cpu1_intc 9>, + <&cpu2_intc 9>, + <&cpu3_intc 9>, + <&cpu4_intc 9>; + reg = <0xd000000 0x4080>; + interrupt-controller; + #interrupt-cells = <2>; + riscv,num-sources = <63>; + }; + + - | + // Example 2 (APIC domain forwarding interrupts as MSIs): + + interrupt-controller@d000000 { + compatible = "vendor,chip-aplic", "riscv,aplic"; + msi-parent = <&imsics>; + reg = <0xd000000 0x4000>; + interrupt-controller; + #interrupt-cells = <2>; + riscv,num-sources = <63>; + }; +...Signature · 1 line
2.34.1
Anup Patel
maintainerRe: [PATCH 6/9] dt-bindings: Add RISC-V advanced PLIC bindings
Quoted 88 lines · Rob Herring
Quoted 73 lines · Anup Patel
We add DT bindings document for RISC-V advanced platform level interrupt controller (APLIC) defined by the RISC-V advanced interrupt architecture (AIA) specification.
Signed-off-by Anup Patel <[email protected]>--- .../interrupt-controller/riscv,aplic.yaml | 136 ++++++++++++++++++ 1 file changed, 136 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yamlDocumentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +57
-0@@ -0,0 +1,136 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/riscv,aplic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RISC-V Advancded Platform Level Interrupt Controller (APLIC) + +maintainers: + - Anup Patel <[email protected]> + +description: + The RISC-V advanced interrupt architecture (AIA) defines advanced platform + level interrupt controller (APLIC) for handling wired interrupts in a + RISC-V platform. The RISC-V AIA specification can be found at + https://github.com/riscv/riscv-aia. + + The RISC-V APLIC is implemented as hierarchical APLIC domains where all + interrupt sources connect to the root domain which can further delegate + interrupts to child domains. We have one device tree node for each APLIC + domain. + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + compatible: + items: + - enum: + - vendor,chip-aplic + - const: riscv,aplic + + reg: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + interrupts-extended: + minItems: 1 + maxItems: 16384 + description: + The presence of this property implies that given APLIC domain directly + injects external interrupts to a set of RISC-V HARTS (or CPUs). Each + node pointed to should be a riscv,cpu-intc node, which has a riscv node + (i.e. RISC-V HART) as parent. + + msi-parent: + description: + The presence of this property implies that given APLIC domain forwards + wired interrupts as MSIs to a AIA incoming message signaled interrupt + controller (IMSIC). This property should be considered only when the + interrupts-extended property is absent. + + riscv,num-sources:Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml line 67
Quoted 10 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +10
-0+ $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 1 + maximum: 1023 + description: + Specifies how many wired interrupts are supported by this APLIC domain. + + riscv,children: + $ref: '/schemas/types.yaml#/definitions/phandle-array' + minItems: 1 + maxItems: 1024As each entry is a single phandle:
Quoted 2 lines
items:
maxItems: 1
Okay, I will update.
Quoted 14 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml line 79
Quoted 13 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +12
-0+ description: + This property represents a list of child APLIC domains for the given + APLIC domain. Each child APLIC domain is assigned child index in + increasing order with the first child APLIC domain assigned child + index 0. The APLIC domain child index is used by firmware to delegate + interrupts from the given APLIC domain to a particular child APLIC + domain. + + riscv,delegate: + $ref: '/schemas/types.yaml#/definitions/phandle-array' + minItems: 1 + maxItems: 1024
Quoted 5 lines
items:
items:
- description: child APLIC domain phandle
- description: ...
- description: ...
Okay, I will update.
Quoted 8 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml line 84
Quoted 6 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +5
-0+ description: + This property represents a interrupt delegation list where each entry + is a triple consisting of child APLIC domain phandle, first interrupt + number, and last interrupt number. The firmware will configure interrupt + delegation registers based on interrupt delegation list.First and last are inclusive?
Yes, first and last are inclusive. I will clarify this in the description.
Quoted 4 lines
Couldn't riscv,children and riscv,delegate be combined? How would they be different? If some children don't have any delegated interrupts, you could use -1 for the cells for example.
The "riscv,children" describes the hierarchy of APLIC domains in HW whereas "riscv,delegate" describes the system choices of delegating interrupts from a parent APLIC domain to one of its children. I feel it's not natural to combine these two properties.
Quoted 54 lines
An example showing the need would be nice.
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml line 97
Quoted 13 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +13
-0+ +additionalProperties: false + +required: + - compatible + - reg + - interrupt-controller + - "#interrupt-cells" + - riscv,num-sources + +examples: + - | + // Example 1 (APIC domain directly injecting interrupt to HARTs):Is than an x86 APIC or a typo?
Quoted 35 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +35
-0+ + aplic0: interrupt-controller@c000000 { + compatible = "vendor,chip-aplic", "riscv,aplic"; + interrupts-extended = <&cpu1_intc 11>, + <&cpu2_intc 11>, + <&cpu3_intc 11>, + <&cpu4_intc 11>; + reg = <0xc000000 0x4080>; + interrupt-controller; + #interrupt-cells = <2>; + riscv,num-sources = <63>; + riscv,children = <&aplic1>; + riscv,delegate = <&aplic1 1 63>; + }; + + aplic1: interrupt-controller@d000000 { + compatible = "vendor,chip-aplic", "riscv,aplic"; + interrupts-extended = <&cpu1_intc 9>, + <&cpu2_intc 9>, + <&cpu3_intc 9>, + <&cpu4_intc 9>; + reg = <0xd000000 0x4080>; + interrupt-controller; + #interrupt-cells = <2>; + riscv,num-sources = <63>; + }; + + - | + // Example 2 (APIC domain forwarding interrupts as MSIs): + + interrupt-controller@d000000 { + compatible = "vendor,chip-aplic", "riscv,aplic"; + msi-parent = <&imsics>; + reg = <0xd000000 0x4000>; + interrupt-controller;
Quoted 8 lines
Quoted 8 lines
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml new file +4
-1+ #interrupt-cells = <2>; + riscv,num-sources = <63>; + }; +... --2.34.1
Regards,
Anup
PATCH 7/9 irqchip: Add RISC-V advanced PLIC driver
In reply to Anup PatelThe RISC-V advanced interrupt architecture (AIA) specification defines a new interrupt controller for managing wired interrupts on a RISC-V platform. This new interrupt controller is referred to as advanced platform-level interrupt controller (APLIC) which can forward wired interrupts to CPUs (or HARTs) as local interrupts OR as message signaled interrupts.
(For more details refer https://github.com/riscv/riscv-aia)
This patch adds an irqchip driver for RISC-V APLIC found on RISC-V platforms.
--- drivers/irqchip/Kconfig | 12 + drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-riscv-aplic.c | 656 ++++++++++++++++++++++++++++ include/linux/irqchip/riscv-aplic.h | 117 +++++ 4 files changed, 786 insertions(+) create mode 100644 drivers/irqchip/irq-riscv-aplic.c create mode 100644 include/linux/irqchip/riscv-aplic.h
drivers/irqchip/Kconfig +12 -0
@@ -563,6 +563,18 @@ config SIFIVE_PLIC If you don't know what to do here, say Y. +config RISCV_APLIC + bool "RISC-V Advanced Platform-Level Interrupt Controller" + depends on RISCV + select IRQ_DOMAIN_HIERARCHY + select GENERIC_MSI_IRQ_DOMAIN + help + This enables support for the APLIC chip found in RISC-V systems. + The APLIC controls device wired interrupts and forwards them to + each core as wired local interrupt or per-core MSIs. + + If you don't know what to do here, say Y. + config RISCV_IMSIC bool "RISC-V Incoming MSI Controller" depends on RISCV
drivers/irqchip/Makefile +1 -0
@@ -96,6 +96,7 @@ obj-$(CONFIG_QCOM_MPM) += irq-qcom-mpm.o obj-$(CONFIG_CSKY_MPINTC) += irq-csky-mpintc.o obj-$(CONFIG_CSKY_APB_INTC) += irq-csky-apb-intc.o obj-$(CONFIG_RISCV_INTC) += irq-riscv-intc.o +obj-$(CONFIG_RISCV_APLIC) += irq-riscv-aplic.o obj-$(CONFIG_RISCV_IMSIC) += irq-riscv-imsic.o obj-$(CONFIG_SIFIVE_PLIC) += irq-sifive-plic.o obj-$(CONFIG_IMX_IRQSTEER) += irq-imx-irqsteer.o
drivers/irqchip/irq-riscv-aplic.c new file +656 -0
656 lines not on this page · raw message
include/linux/irqchip/riscv-aplic.h new file +117 -0
117 lines not on this page · raw message
Signature · 7 lines
2.34.1 _______________________________________________ linux-riscv mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-riscv
Re: [PATCH 7/9] irqchip: Add RISC-V advanced PLIC driver
Quoted 371 lines · Anup Patel
The RISC-V advanced interrupt architecture (AIA) specification defines a new interrupt controller for managing wired interrupts on a RISC-V platform. This new interrupt controller is referred to as advanced platform-level interrupt controller (APLIC) which can forward wired interrupts to CPUs (or HARTs) as local interrupts OR as message signaled interrupts.
(For more details refer https://github.com/riscv/riscv-aia)This patch adds an irqchip driver for RISC-V APLIC found on RISC-V platforms.
Signed-off-by Anup Patel <[email protected]>--- drivers/irqchip/Kconfig | 12 + drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-riscv-aplic.c | 656 ++++++++++++++++++++++++++++ include/linux/irqchip/riscv-aplic.h | 117 +++++ 4 files changed, 786 insertions(+) create mode 100644 drivers/irqchip/irq-riscv-aplic.c create mode 100644 include/linux/irqchip/riscv-aplic.hdrivers/irqchip/Kconfig +12
-0@@ -563,6 +563,18 @@ config SIFIVE_PLIC If you don't know what to do here, say Y. +config RISCV_APLIC + bool "RISC-V Advanced Platform-Level Interrupt Controller" + depends on RISCV + select IRQ_DOMAIN_HIERARCHY + select GENERIC_MSI_IRQ_DOMAIN + help + This enables support for the APLIC chip found in RISC-V systems. + The APLIC controls device wired interrupts and forwards them to + each core as wired local interrupt or per-core MSIs. + + If you don't know what to do here, say Y. + config RISCV_IMSIC bool "RISC-V Incoming MSI Controller" depends on RISCVdrivers/irqchip/Makefile +1
-0@@ -96,6 +96,7 @@ obj-$(CONFIG_QCOM_MPM) += irq-qcom-mpm.o obj-$(CONFIG_CSKY_MPINTC) += irq-csky-mpintc.o obj-$(CONFIG_CSKY_APB_INTC) += irq-csky-apb-intc.o obj-$(CONFIG_RISCV_INTC) += irq-riscv-intc.o +obj-$(CONFIG_RISCV_APLIC) += irq-riscv-aplic.o obj-$(CONFIG_RISCV_IMSIC) += irq-riscv-imsic.o obj-$(CONFIG_SIFIVE_PLIC) += irq-sifive-plic.o obj-$(CONFIG_IMX_IRQSTEER) += irq-imx-irqsteer.odrivers/irqchip/irq-riscv-aplic.c new file +308
-0@@ -0,0 +1,656 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Copyright (C) 2021 Western Digital Corporation or its affiliates. +* Copyright (C) 2022 Ventana Micro Systems Inc. +*/ + +#include <linux/bitops.h> +#include <linux/cpu.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/irqchip.h> +#include <linux/irqchip/chained_irq.h> +#include <linux/irqchip/riscv-aplic.h> +#include <linux/irqchip/riscv-imsic.h> +#include <linux/irqdomain.h> +#include <linux/module.h> +#include <linux/msi.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/platform_device.h> +#include <linux/smp.h> + +#define APLIC_DEFAULT_PRIORITY 1 +#define APLIC_DISABLE_IDELIVERY 0 +#define APLIC_ENABLE_IDELIVERY 1 +#define APLIC_DISABLE_ITHRESHOLD 1 +#define APLIC_ENABLE_ITHRESHOLD 0 + +struct aplic_msicfg { +phys_addr_t base_ppn; +u32 hhxs; +u32 hhxw; +u32 lhxs; +u32 lhxw; +}; + +struct aplic_idc { +unsigned int hart_index; +void __iomem *regs; +struct aplic_priv *priv; +}; + +struct aplic_priv { +struct device *dev; +u32 nr_irqs; +u32 nr_idcs; +void __iomem *regs; +struct irq_domain *irqdomain; +struct aplic_msicfg msicfg; +struct cpumask lmask; +}; + +static unsigned int aplic_idc_parent_irq; +static DEFINE_PER_CPU(struct aplic_idc, aplic_idcs); + +static void aplic_irq_unmask (struct irq_data *d) +{ +struct aplic_priv *priv =irq_data_get_irq_chip_data (d); + +writel (d->hwirq, priv->regs +APLIC_SETIENUM ); + +if (!priv->nr_idcs) +irq_chip_unmask_parent (d); +} + +static void aplic_irq_mask (struct irq_data *d) +{ +struct aplic_priv *priv =irq_data_get_irq_chip_data (d); + +writel (d->hwirq, priv->regs +APLIC_CLRIENUM ); + +if (!priv->nr_idcs) +irq_chip_mask_parent (d); +} + +static int aplic_set_type (struct irq_data *d,unsigned int type) +{ +u32 val =0 ; +void __iomem *sourcecfg; +struct aplic_priv *priv =irq_data_get_irq_chip_data (d); + +switch (type) { +case IRQ_TYPE_NONE : + val =APLIC_SOURCECFG_SM_INACTIVE ; +break ; +case IRQ_TYPE_LEVEL_LOW : + val =APLIC_SOURCECFG_SM_LEVEL_LOW ; +break ; +case IRQ_TYPE_LEVEL_HIGH : + val =APLIC_SOURCECFG_SM_LEVEL_HIGH ; +break ; +case IRQ_TYPE_EDGE_FALLING : + val =APLIC_SOURCECFG_SM_EDGE_FALL ; +break ; +case IRQ_TYPE_EDGE_RISING : + val =APLIC_SOURCECFG_SM_EDGE_RISE ; +break ; +default : +return -EINVAL ; + } + + sourcecfg = priv->regs +APLIC_SOURCECFG_BASE ; + sourcecfg += (d->hwirq -1 ) *sizeof (u32); +writel (val, sourcecfg); + +return 0 ; +} + +#ifdef CONFIG_SMP +static int aplic_set_affinity (struct irq_data *d, +const struct cpumask *mask_val,bool force) +{ +struct aplic_priv *priv =irq_data_get_irq_chip_data (d); +struct aplic_idc *idc; +unsigned int cpu, val; +struct cpumask amask; +void __iomem *target; + +if (!priv->nr_idcs) +return irq_chip_set_affinity_parent (d, mask_val, force); + +cpumask_and (&amask, &priv->lmask, mask_val); + +if (force) + cpu =cpumask_first (&amask); +else + cpu =cpumask_any_and (&amask, cpu_online_mask); + +if (cpu >= nr_cpu_ids) +return -EINVAL ; + + idc =per_cpu_ptr (&aplic_idcs, cpu); + target = priv->regs +APLIC_TARGET_BASE ; + target += (d->hwirq -1 ) *sizeof (u32); + val = idc->hart_index &APLIC_TARGET_HART_IDX_MASK ; + val <<=APLIC_TARGET_HART_IDX_SHIFT ; + val |=APLIC_DEFAULT_PRIORITY ; +writel (val, target); + +irq_data_update_effective_affinity (d,cpumask_of (cpu)); + +return IRQ_SET_MASK_OK_DONE ; +} +#endif + +static struct irq_chip aplic_chip = { + .name ="RISC-V APLIC" , + .irq_mask = aplic_irq_mask, + .irq_unmask = aplic_irq_unmask, + .irq_set_type = aplic_set_type, +#ifdef CONFIG_SMP + .irq_set_affinity = aplic_set_affinity, +#endif + .flags =IRQCHIP_SET_TYPE_MASKED | +IRQCHIP_SKIP_SET_WAKE | +IRQCHIP_MASK_ON_SUSPEND , +}; + +static int aplic_irqdomain_translate (struct irq_domain *d, +struct irq_fwspec *fwspec, +unsigned long *hwirq, +unsigned int *type) +{ +if (WARN_ON (fwspec->param_count <2 )) +return -EINVAL ; +if (WARN_ON (!fwspec->param[0 ])) +return -EINVAL ; + + *hwirq = fwspec->param[0 ]; + *type = fwspec->param[1 ] &IRQ_TYPE_SENSE_MASK ; + +WARN_ON (*type ==IRQ_TYPE_NONE ); + +return 0 ; +} + +static int aplic_irqdomain_msi_alloc (struct irq_domain *domain, +unsigned int virq,unsigned int nr_irqs, +void *arg) +{ +int i, ret; +unsigned int type; +irq_hw_number_t hwirq; +struct irq_fwspec *fwspec = arg; +struct aplic_priv *priv =platform_msi_get_host_data (domain); + + ret =aplic_irqdomain_translate (domain, fwspec, &hwirq, &type); +if (ret) +return ret; + + ret =platform_msi_device_domain_alloc (domain, virq, nr_irqs); +if (ret) +return ret; + +for (i =0 ; i < nr_irqs; i++) +irq_domain_set_hwirq_and_chip (domain, virq + i, hwirq + i, + &aplic_chip, priv); + +return 0 ; +} + +static const struct irq_domain_ops aplic_irqdomain_msi_ops = { + .translate = aplic_irqdomain_translate, + .alloc = aplic_irqdomain_msi_alloc, + .free = platform_msi_device_domain_free, +}; + +static int aplic_irqdomain_idc_alloc (struct irq_domain *domain, +unsigned int virq,unsigned int nr_irqs, +void *arg) +{ +int i, ret; +unsigned int type; +irq_hw_number_t hwirq; +struct irq_fwspec *fwspec = arg; +struct aplic_priv *priv = domain->host_data; + + ret =aplic_irqdomain_translate (domain, fwspec, &hwirq, &type); +if (ret) +return ret; + +for (i =0 ; i < nr_irqs; i++) { +irq_domain_set_info (domain, virq + i, hwirq + i, + &aplic_chip, priv, handle_simple_irq, +NULL ,NULL ); +irq_set_affinity (virq + i, &priv->lmask); + } + +return 0 ; +} + +static const struct irq_domain_ops aplic_irqdomain_idc_ops = { + .translate = aplic_irqdomain_translate, + .alloc = aplic_irqdomain_idc_alloc, + .free = irq_domain_free_irqs_top, +}; + +static void aplic_init_hw_irqs (struct aplic_priv *priv) +{ +int i; + +/* Disable all interrupts */ +for (i =0 ; i <= priv->nr_irqs; i +=32 ) +writel (-1U , priv->regs +APLIC_CLRIE_BASE + + (i /32 ) *sizeof (u32)); + +/* Set interrupt type and default priority for all interrupts */ +for (i =1 ; i <= priv->nr_irqs; i++) { +writel (0 , priv->regs +APLIC_SOURCECFG_BASE + + (i -1 ) *sizeof (u32)); +writel (APLIC_DEFAULT_PRIORITY , + priv->regs +APLIC_TARGET_BASE + + (i -1 ) *sizeof (u32)); + } + +/* Clear APLIC domaincfg */ +writel (0 , priv->regs +APLIC_DOMAINCFG ); +} + +static void aplic_init_hw_global (struct aplic_priv *priv) +{ +u32 val; +#ifdef CONFIG_RISCV_M_MODE +u32 valH; + +if (!priv->nr_idcs) { + val = priv->msicfg.base_ppn; + valH = (priv->msicfg.base_ppn >>32 ) & + APLIC_xMSICFGADDRH_BAPPN_MASK; + valH |= (priv->msicfg.lhxw & APLIC_xMSICFGADDRH_LHXW_MASK) + << APLIC_xMSICFGADDRH_LHXW_SHIFT; + valH |= (priv->msicfg.hhxw & APLIC_xMSICFGADDRH_HHXW_MASK) + << APLIC_xMSICFGADDRH_HHXW_SHIFT; + valH |= (priv->msicfg.lhxs & APLIC_xMSICFGADDRH_LHXS_MASK) + << APLIC_xMSICFGADDRH_LHXS_SHIFT; + valH |= (priv->msicfg.hhxs & APLIC_xMSICFGADDRH_HHXS_MASK) + << APLIC_xMSICFGADDRH_HHXS_SHIFT; +writel (val, priv->regs + APLIC_xMSICFGADDR); +writel (valH, priv->regs + APLIC_xMSICFGADDRH); + } +#endif + +/* Setup APLIC domaincfg register */ + val =readl (priv->regs +APLIC_DOMAINCFG ); + val |=APLIC_DOMAINCFG_IE ; +if (!priv->nr_idcs) + val |=APLIC_DOMAINCFG_DM ; +writel (val, priv->regs +APLIC_DOMAINCFG ); +if (readl (priv->regs +APLIC_DOMAINCFG ) != val) +dev_warn (priv->dev, +"unable to write 0x%x in domaincfg\n" , val); +} + +static void aplic_msi_write_msg (struct msi_desc *desc,struct msi_msg *msg) +{ +unsigned int group_index, hart_index, guest_index, val; +struct device *dev =msi_desc_to_dev (desc); +struct aplic_priv *priv =dev_get_drvdata (dev); +struct irq_data *d =irq_get_irq_data (desc->irq); +struct aplic_msicfg *mc = &priv->msicfg; +phys_addr_t tppn, tbppn, msg_addr; +void __iomem *target; + +/* Save the MSI address and data */ + msg_addr = (((u64 )msg->address_hi) <<32 ) | msg->address_lo; +WARN_ON (msg->data >APLIC_TARGET_EIID_MASK );
drivers/irqchip/irq-riscv-aplic.c line 318
Quoted 10 lines
drivers/irqchip/irq-riscv-aplic.c new file +10
-0+ +/* Compute target HART PPN */ + tppn = msg_addr >> APLIC_xMSICFGADDR_PPN_SHIFT; + +/* Compute target HART Base PPN */ + tbppn = tppn; + tbppn &= ~APLIC_xMSICFGADDR_PPN_HART (mc->lhxs); + tbppn &= ~APLIC_xMSICFGADDR_PPN_LHX (mc->lhxw, mc->lhxs); + tbppn &= ~APLIC_xMSICFGADDR_PPN_HHX (mc->hhxw, mc->hhxs); +WARN_ON (tbppn != mc->base_ppn);
platform_msi_write_msg() will get called with a zeroed-out msg_msg in the free_irq() path, triggering this warning. Should detect that case and (I assume) just write 0 to the APLIC target register.
-Andrew
Quoted 464 lines
drivers/irqchip/irq-riscv-aplic.c new file +338
-0+ +/* Compute target group and hart indexes */ + group_index = (tppn >>APLIC_xMSICFGADDR_PPN_HHX_SHIFT (mc->hhxs)) & +APLIC_xMSICFGADDR_PPN_HHX_MASK (mc->hhxw); + hart_index = (tppn >>APLIC_xMSICFGADDR_PPN_LHX_SHIFT (mc->lhxs)) & +APLIC_xMSICFGADDR_PPN_LHX_MASK (mc->lhxw); + hart_index |= (group_index << mc->lhxw); +WARN_ON (hart_index >APLIC_TARGET_HART_IDX_MASK ); + +/* Compute target guest index */ + guest_index = tppn &APLIC_xMSICFGADDR_PPN_HART (mc->lhxs); +WARN_ON (guest_index >APLIC_TARGET_GUEST_IDX_MASK ); + +/* Update IRQ TARGET register */ + target = priv->regs +APLIC_TARGET_BASE ; + target += (d->hwirq -1 ) *sizeof (u32); + val = (hart_index &APLIC_TARGET_HART_IDX_MASK ) + <<APLIC_TARGET_HART_IDX_SHIFT ; + val |= (guest_index &APLIC_TARGET_GUEST_IDX_MASK ) + <<APLIC_TARGET_GUEST_IDX_SHIFT ; + val |= (msg->data &APLIC_TARGET_EIID_MASK ); +writel (val, target); +} + +static int aplic_setup_msi (struct aplic_priv *priv) +{ +struct device *dev = priv->dev; +struct aplic_msicfg *mc = &priv->msicfg; +const struct imsic_global_config *imsic_global; + +/* +* The APLIC outgoing MSI config registers assume target MSI +* controller to be RISC-V AIA IMSIC controller. +*/ + imsic_global =imsic_get_global_config (); +if (!imsic_global) { +dev_err (dev,"IMSIC global config not found\n" ); +return -ENODEV ; + } + +/* Find number of guest index bits (LHXS) */ + mc->lhxs = imsic_global->guest_index_bits; +if (APLIC_xMSICFGADDRH_LHXS_MASK < mc->lhxs) { +dev_err (dev,"IMSIC guest index bits big for APLIC LHXS\n" ); +return -EINVAL ; + } + +/* Find number of HART index bits (LHXW) */ + mc->lhxw = imsic_global->hart_index_bits; +if (APLIC_xMSICFGADDRH_LHXW_MASK < mc->lhxw) { +dev_err (dev,"IMSIC hart index bits big for APLIC LHXW\n" ); +return -EINVAL ; + } + +/* Find number of group index bits (HHXW) */ + mc->hhxw = imsic_global->group_index_bits; +if (APLIC_xMSICFGADDRH_HHXW_MASK < mc->hhxw) { +dev_err (dev,"IMSIC group index bits big for APLIC HHXW\n" ); +return -EINVAL ; + } + +/* Find first bit position of group index (HHXS) */ + mc->hhxs = imsic_global->group_index_shift; +if (mc->hhxs < (2 * APLIC_xMSICFGADDR_PPN_SHIFT)) { +dev_err (dev,"IMSIC group index shift should be >= %d\n" , + (2 * APLIC_xMSICFGADDR_PPN_SHIFT)); +return -EINVAL ; + } + mc->hhxs -= (2 * APLIC_xMSICFGADDR_PPN_SHIFT); +if (APLIC_xMSICFGADDRH_HHXS_MASK < mc->hhxs) { +dev_err (dev,"IMSIC group index shift big for APLIC HHXS\n" ); +return -EINVAL ; + } + +/* Compute PPN base */ + mc->base_ppn = imsic_global->base_addr >> APLIC_xMSICFGADDR_PPN_SHIFT; + mc->base_ppn &= ~APLIC_xMSICFGADDR_PPN_HART (mc->lhxs); + mc->base_ppn &= ~APLIC_xMSICFGADDR_PPN_LHX (mc->lhxw, mc->lhxs); + mc->base_ppn &= ~APLIC_xMSICFGADDR_PPN_HHX (mc->hhxw, mc->hhxs); + +/* Use all possible CPUs as lmask */ +cpumask_copy (&priv->lmask, cpu_possible_mask); + +return 0 ; +} + +/* +* To handle an APLIC IDC interrupts, we just read the CLAIMI register +* which will return highest priority pending interrupt and clear the +* pending bit of the interrupt. This process is repeated until CLAIMI +* register return zero value. +*/ +static void aplic_idc_handle_irq (struct irq_desc *desc) +{ +struct aplic_idc *idc =this_cpu_ptr (&aplic_idcs); +struct irq_chip *chip =irq_desc_get_chip (desc); +irq_hw_number_t hw_irq; +int irq; + +chained_irq_enter (chip, desc); + +while ((hw_irq =readl (idc->regs +APLIC_IDC_CLAIMI ))) { + hw_irq = hw_irq >>APLIC_IDC_TOPI_ID_SHIFT ; + irq =irq_find_mapping (idc->priv->irqdomain, hw_irq); + +if (unlikely (irq <=0 )) +pr_warn_ratelimited ("hw_irq %lu mapping not found\n" , + hw_irq); +else +generic_handle_irq (irq); + } + +chained_irq_exit (chip, desc); +} + +static void aplic_idc_set_delivery (struct aplic_idc *idc,bool en) +{ +u32 de = (en) ?APLIC_ENABLE_IDELIVERY :APLIC_DISABLE_IDELIVERY ; +u32 th = (en) ?APLIC_ENABLE_ITHRESHOLD :APLIC_DISABLE_ITHRESHOLD ; + +/* Priority must be less than threshold for interrupt triggering */ +writel (th, idc->regs +APLIC_IDC_ITHRESHOLD ); + +/* Delivery must be set to 1 for interrupt triggering */ +writel (de, idc->regs +APLIC_IDC_IDELIVERY ); +} + +static int aplic_idc_dying_cpu (unsigned int cpu) +{ +if (aplic_idc_parent_irq) +disable_percpu_irq (aplic_idc_parent_irq); + +return 0 ; +} + +static int aplic_idc_starting_cpu (unsigned int cpu) +{ +if (aplic_idc_parent_irq) +enable_percpu_irq (aplic_idc_parent_irq, +irq_get_trigger_type (aplic_idc_parent_irq)); + +return 0 ; +} + +static int aplic_setup_idc (struct aplic_priv *priv) +{ +int i, j, rc, cpu, setup_count =0 ; +struct device_node *node = priv->dev->of_node; +struct device *dev = priv->dev; +struct of_phandle_args parent; +struct irq_domain *domain; +unsigned long hartid; +struct aplic_idc *idc; +u32 val; + +/* Setup per-CPU IDC and target CPU mask */ +for (i =0 ; i < priv->nr_idcs; i++) { +if (of_irq_parse_one (node, i, &parent)) { +dev_err (dev,"failed to parse parent for IDC%d.\n" , + i); +return -EIO ; + } + +/* Skip IDCs which do not connect to external interrupts */ +if (parent.args[0 ] !=RV_IRQ_EXT ) +continue ; + + rc =riscv_of_parent_hartid (parent.np, &hartid); +if (rc) { +dev_err (dev,"failed to parse hart ID for IDC%d.\n" , + i); +return rc; + } + + cpu =riscv_hartid_to_cpuid (hartid); +if (cpu <0 ) { +dev_warn (dev,"invalid cpuid for IDC%d\n" , i); +continue ; + } + +cpumask_set_cpu (cpu, &priv->lmask); + + idc =per_cpu_ptr (&aplic_idcs, cpu); +WARN_ON (idc->priv); + + idc->hart_index = i; + idc->regs = priv->regs +APLIC_IDC_BASE + i *APLIC_IDC_SIZE ; + idc->priv = priv; + +aplic_idc_set_delivery (idc, true); + +/* +* Boot cpu might not have APLIC hart_index = 0 so check +* and update target registers of all interrupts. +*/ +if (cpu ==smp_processor_id () && idc->hart_index) { + val = idc->hart_index &APLIC_TARGET_HART_IDX_MASK ; + val <<=APLIC_TARGET_HART_IDX_SHIFT ; + val |=APLIC_DEFAULT_PRIORITY ; +for (j =1 ; j <= priv->nr_irqs; j++) +writel (val, priv->regs +APLIC_TARGET_BASE + + (j -1 ) *sizeof (u32)); + } + + setup_count++; + } + +/* Find parent domain and register chained handler */ + domain =irq_find_matching_fwnode (riscv_get_intc_hwnode (), +DOMAIN_BUS_ANY ); +if (!aplic_idc_parent_irq && domain) { + aplic_idc_parent_irq =irq_create_mapping (domain,RV_IRQ_EXT ); +if (aplic_idc_parent_irq) { +irq_set_chained_handler (aplic_idc_parent_irq, + aplic_idc_handle_irq); + +/* +* Setup CPUHP notifier to enable IDC parent +* interrupt on all CPUs +*/ +cpuhp_setup_state (CPUHP_AP_ONLINE_DYN , +"irqchip/riscv/aplic:starting" , + aplic_idc_starting_cpu, + aplic_idc_dying_cpu); + } + } + +/* Fail if we were not able to setup IDC for any CPU */ +return (setup_count) ?0 : -ENODEV ; +} + +static int aplic_probe (struct platform_device *pdev) +{ +struct device_node *node = pdev->dev.of_node; +struct device *dev = &pdev->dev; +struct aplic_priv *priv; +struct resource *regs; +phys_addr_t pa; +int rc; + + regs =platform_get_resource (pdev,IORESOURCE_MEM ,0 ); +if (!regs) { +dev_err (dev,"cannot find registers resource\n" ); +return -ENOENT ; + } + + priv =devm_kzalloc (dev,sizeof (*priv),GFP_KERNEL ); +if (!priv) +return -ENOMEM ; +platform_set_drvdata (pdev, priv); + priv->dev = dev; + + priv->regs =devm_ioremap (dev, regs->start,resource_size (regs)); +if (WARN_ON (!priv->regs)) { +dev_err (dev,"failed ioremap registers\n" ); +return -EIO ; + } + +of_property_read_u32 (node,"riscv,num-sources" , &priv->nr_irqs); +if (!priv->nr_irqs) { +dev_err (dev,"failed to get number of interrupt sources\n" ); +return -EINVAL ; + } + +/* Setup initial state APLIC interrupts */ +aplic_init_hw_irqs (priv); + +/* Setup IDCs or MSIs based on parent interrupts in DT node */ + priv->nr_idcs =of_irq_count (node); +if (priv->nr_idcs) + rc =aplic_setup_idc (priv); +else + rc =aplic_setup_msi (priv); +if (rc) +return rc; + +/* Setup global config and interrupt delivery */ +aplic_init_hw_global (priv); + +/* Create irq domain instance for the APLIC */ +if (priv->nr_idcs) + priv->irqdomain =irq_domain_create_linear ( +of_node_to_fwnode (node), + priv->nr_irqs +1 , + &aplic_irqdomain_idc_ops, + priv); +else + priv->irqdomain =platform_msi_create_device_domain (dev, + priv->nr_irqs +1 , + aplic_msi_write_msg, + &aplic_irqdomain_msi_ops, + priv); +if (!priv->irqdomain) { +dev_err (dev,"failed to add irq domain\n" ); +return -ENOMEM ; + } + +/* Advertise the interrupt controller */ +if (priv->nr_idcs) { +dev_info (dev,"%d interrupts directly connected to %d CPUs\n" , + priv->nr_irqs, priv->nr_idcs); + }else { + pa = priv->msicfg.base_ppn << APLIC_xMSICFGADDR_PPN_SHIFT; +dev_info (dev,"%d interrupts forwared to MSI base %pa\n" , + priv->nr_irqs, &pa); + } + +return 0 ; +} + +static int aplic_remove (struct platform_device *pdev) +{ +struct aplic_priv *priv =platform_get_drvdata (pdev); + +irq_domain_remove (priv->irqdomain); + +return 0 ; +} + +static const struct of_device_id aplic_match[] = { + { .compatible ="riscv,aplic" }, + {} +}; + +static struct platform_driver aplic_driver = { + .driver = { + .name ="riscv-aplic" , + .of_match_table = aplic_match, + }, + .probe = aplic_probe, + .remove = aplic_remove, +}; + +static int __init aplic_init (void ) +{ +return platform_driver_register (&aplic_driver); +} +core_initcall (aplic_init);include/linux/irqchip/riscv-aplic.h new file +117
-1@@ -0,0 +1,117 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* +* Copyright (C) 2021 Western Digital Corporation or its affiliates. +* Copyright (C) 2022 Ventana Micro Systems Inc. +*/ +#ifndef __LINUX_IRQCHIP_RISCV_APLIC_H +#define __LINUX_IRQCHIP_RISCV_APLIC_H + +#include <linux/bitops.h> + +#define APLIC_MAX_IDC BIT(14) +#define APLIC_MAX_SOURCE 1024 + +#define APLIC_DOMAINCFG 0x0000 +#define APLIC_DOMAINCFG_RDONLY 0x80000000 +#define APLIC_DOMAINCFG_IE BIT(8) +#define APLIC_DOMAINCFG_DM BIT(2) +#define APLIC_DOMAINCFG_BE BIT(0) + +#define APLIC_SOURCECFG_BASE 0x0004 +#define APLIC_SOURCECFG_D BIT(10) +#define APLIC_SOURCECFG_CHILDIDX_MASK 0x000003ff +#define APLIC_SOURCECFG_SM_MASK 0x00000007 +#define APLIC_SOURCECFG_SM_INACTIVE 0x0 +#define APLIC_SOURCECFG_SM_DETACH 0x1 +#define APLIC_SOURCECFG_SM_EDGE_RISE 0x4 +#define APLIC_SOURCECFG_SM_EDGE_FALL 0x5 +#define APLIC_SOURCECFG_SM_LEVEL_HIGH 0x6 +#define APLIC_SOURCECFG_SM_LEVEL_LOW 0x7 + +#define APLIC_MMSICFGADDR 0x1bc0 +#define APLIC_MMSICFGADDRH 0x1bc4 +#define APLIC_SMSICFGADDR 0x1bc8 +#define APLIC_SMSICFGADDRH 0x1bcc + +#ifdef CONFIG_RISCV_M_MODE +#define APLIC_xMSICFGADDR APLIC_MMSICFGADDR +#define APLIC_xMSICFGADDRH APLIC_MMSICFGADDRH +#else +#define APLIC_xMSICFGADDR APLIC_SMSICFGADDR +#define APLIC_xMSICFGADDRH APLIC_SMSICFGADDRH +#endif + +#define APLIC_xMSICFGADDRH_L BIT(31) +#define APLIC_xMSICFGADDRH_HHXS_MASK 0x1f +#define APLIC_xMSICFGADDRH_HHXS_SHIFT 24 +#define APLIC_xMSICFGADDRH_LHXS_MASK 0x7 +#define APLIC_xMSICFGADDRH_LHXS_SHIFT 20 +#define APLIC_xMSICFGADDRH_HHXW_MASK 0x7 +#define APLIC_xMSICFGADDRH_HHXW_SHIFT 16 +#define APLIC_xMSICFGADDRH_LHXW_MASK 0xf +#define APLIC_xMSICFGADDRH_LHXW_SHIFT 12 +#define APLIC_xMSICFGADDRH_BAPPN_MASK 0xfff + +#define APLIC_xMSICFGADDR_PPN_SHIFT 12 + +#define APLIC_xMSICFGADDR_PPN_HART (__lhxs) \ + (BIT(__lhxs) - 1) + +#define APLIC_xMSICFGADDR_PPN_LHX_MASK (__lhxw) \ + (BIT(__lhxw) - 1) +#define APLIC_xMSICFGADDR_PPN_LHX_SHIFT (__lhxs) \ + ((__lhxs)) +#define APLIC_xMSICFGADDR_PPN_LHX (__lhxw, __lhxs) \ + (APLIC_xMSICFGADDR_PPN_LHX_MASK(__lhxw) << \ + APLIC_xMSICFGADDR_PPN_LHX_SHIFT(__lhxs)) + +#define APLIC_xMSICFGADDR_PPN_HHX_MASK (__hhxw) \ + (BIT(__hhxw) - 1) +#define APLIC_xMSICFGADDR_PPN_HHX_SHIFT (__hhxs) \ + ((__hhxs) + APLIC_xMSICFGADDR_PPN_SHIFT) +#define APLIC_xMSICFGADDR_PPN_HHX (__hhxw, __hhxs) \ + (APLIC_xMSICFGADDR_PPN_HHX_MASK(__hhxw) << \ + APLIC_xMSICFGADDR_PPN_HHX_SHIFT(__hhxs)) + +#define APLIC_SETIP_BASE 0x1c00 +#define APLIC_SETIPNUM 0x1cdc + +#define APLIC_CLRIP_BASE 0x1d00 +#define APLIC_CLRIPNUM 0x1ddc + +#define APLIC_SETIE_BASE 0x1e00 +#define APLIC_SETIENUM 0x1edc + +#define APLIC_CLRIE_BASE 0x1f00 +#define APLIC_CLRIENUM 0x1fdc + +#define APLIC_SETIPNUM_LE 0x2000 +#define APLIC_SETIPNUM_BE 0x2004 + +#define APLIC_GENMSI 0x3000 + +#define APLIC_TARGET_BASE 0x3004 +#define APLIC_TARGET_HART_IDX_SHIFT 18 +#define APLIC_TARGET_HART_IDX_MASK 0x3fff +#define APLIC_TARGET_GUEST_IDX_SHIFT 12 +#define APLIC_TARGET_GUEST_IDX_MASK 0x3f +#define APLIC_TARGET_IPRIO_MASK 0xff +#define APLIC_TARGET_EIID_MASK 0x7ff + +#define APLIC_IDC_BASE 0x4000 +#define APLIC_IDC_SIZE 32 + +#define APLIC_IDC_IDELIVERY 0x00 + +#define APLIC_IDC_IFORCE 0x04 + +#define APLIC_IDC_ITHRESHOLD 0x08 + +#define APLIC_IDC_TOPI 0x18 +#define APLIC_IDC_TOPI_ID_SHIFT 16 +#define APLIC_IDC_TOPI_ID_MASK 0x3ff +#define APLIC_IDC_TOPI_PRIO_MASK 0xff + +#define APLIC_IDC_CLAIMI 0x1c + +#endif --2.34.1
PATCH 8/9 RISC-V: Select APLIC and IMSIC drivers for QEMU virt machine
In reply to Anup PatelThe QEMU virt machine supports APLIC and IMSIC emulation so let's select APLIC and IMSIC drivers from SOC_VIRT kconfig option.
--- arch/riscv/Kconfig.socs | 2 ++ 1 file changed, 2 insertions(+)
arch/riscv/Kconfig.socs +2 -0
@@ -35,6 +35,8 @@ config SOC_VIRT select GOLDFISH select RTC_DRV_GOLDFISH if RTC_CLASS select SIFIVE_PLIC + select RISCV_APLIC + select RISCV_IMSIC select PM_GENERIC_DOMAINS if PM select PM_GENERIC_DOMAINS_OF if PM && OF select RISCV_SBI_CPUIDLE if CPU_IDLE && RISCV_SBI
Signature · 7 lines
2.34.1 _______________________________________________ linux-riscv mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-riscv
Re: [PATCH 8/9] RISC-V: Select APLIC and IMSIC drivers for QEMU virt machine
Hey Anup,
Quoted 2 lines · Anup Patel
The QEMU virt machine supports APLIC and IMSIC emulation so let's select APLIC and IMSIC drivers from
SOC_VIRTkconfig option.
I'm kinda torn with this as I've been trying to get rid of the selects from the file in the first place. As Maz seems to have decided that the SiFive plic driver is really the RISC-V plic driver - is there a reason not to either:
- select the sifive plic at an arch level, or
- put a "default RISCV" type thing in the driver entry?
Similarly here, should we default the APLIC and IMSIC drivers to enabled for RISCV rather than using selects?
Quoted 27 lines
Signed-off-by Anup Patel <[email protected]>--- arch/riscv/Kconfig.socs | 2 ++ 1 file changed, 2 insertions(+)arch/riscv/Kconfig.socs +2
-0@@ -35,6 +35,8 @@ config SOC_VIRT select GOLDFISH select RTC_DRV_GOLDFISH if RTC_CLASS select SIFIVE_PLIC + select RISCV_APLIC + select RISCV_IMSIC select PM_GENERIC_DOMAINS if PM select PM_GENERIC_DOMAINS_OF if PM && OF select RISCV_SBI_CPUIDLE if CPU_IDLE && RISCV_SBISignature · 7 lines
2.34.1 _______________________________________________ linux-riscv mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-riscv
PATCH 9/9 MAINTAINERS: Add entry for RISC-V AIA drivers
In reply to Anup PatelAdd myself as maintainer for RISC-V AIA drivers including the RISC-V INTC driver which supports both AIA and non-AIA platforms.
--- MAINTAINERS | 12 ++++++++++++ 1 file changed, 12 insertions(+)
MAINTAINERS +12 -0
@@ -17713,6 +17713,18 @@ F: drivers/perf/riscv_pmu.c F: drivers/perf/riscv_pmu_legacy.c F: drivers/perf/riscv_pmu_sbi.c +RISC-V AIA DRIVERS +M: Anup Patel <[email protected]> +L: [email protected] +S: Maintained +F: Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml +F: Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml +F: drivers/irqchip/irq-riscv-aplic.c +F: drivers/irqchip/irq-riscv-imsic.c +F: drivers/irqchip/irq-riscv-intc.c +F: include/linux/irqchip/riscv-aplic.h +F: include/linux/irqchip/riscv-imsic.h + RISC-V ARCHITECTURE M: Paul Walmsley <[email protected]> M: Palmer Dabbelt <[email protected]>
Signature · 7 lines
2.34.1 _______________________________________________ linux-riscv mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-riscv
Quoted 65 lines · Anup Patel
The RISC-V AIA specification is now frozen as-per the RISC-V international process. The latest frozen specifcation can be found at:
https://github.com/riscv/riscv-aia/releases/download/1.0-RC1/riscv-interrupts-1.0-RC1.pdfAt a high-level, the AIA specification adds three things:
1) AIA CSRs
- Improved local interrupt support
2) Incoming Message Signaled Interrupt Controller (IMSIC)
- Per-HART MSI controller
- Support MSI virtualization
- Support IPI along with virtualization
3) Advanced Platform-Level Interrupt Controller (APLIC)
- Wired interrupt controller
- In MSI-mode, converts wired interrupt into MSIs (i.e. MSI generator)
- In Direct-mode, injects external interrupts directly into HARTsFor an overview of the AIA specification, refer the recent AIA virtualization talk at KVM Forum 2022:
https://static.sched.com/hosted_files/kvmforum2022/a1/AIA_Virtualization_in_KVM_RISCV_final.pdf
https://www.youtube.com/watch?v=r071dL8Z0yoThis series adds required Linux irqchip drivers for AIA and it depends on the recent "RISC-V IPI Improvements".
(Refer, https://lore.kernel.org/lkml/[email protected]/t/)To test this series, use QEMU v7.1 (or higher) and OpenSBI v1.1 (or higher).
These patches can also be found in the
riscv_aia_v1branch at:
https://github.com/avpatel/linux.gitAnup Patel (9):
RISC-V: Add AIA related CSR defines
RISC-V: Detect AIA CSRs from ISA string irqchip/riscv-intc: Add support for RISC-V AIA
dt-bindings: Add RISC-V incoming MSI controller bindings
irqchip: Add RISC-V incoming MSI controller driver
dt-bindings: Add RISC-V advanced PLIC bindings
irqchip: Add RISC-V advanced PLIC driver
RISC-V: Select APLIC and IMSIC drivers for QEMU virt machine
MAINTAINERS: Add entry for RISC-V AIA drivers.../interrupt-controller/riscv,aplic.yaml | 136 ++ .../interrupt-controller/riscv,imsic.yaml | 174 +++ MAINTAINERS | 12 + arch/riscv/Kconfig.socs | 2 + arch/riscv/include/asm/csr.h | 92 ++ arch/riscv/include/asm/hwcap.h | 8 + arch/riscv/kernel/cpu.c | 2 + arch/riscv/kernel/cpufeature.c | 2 + drivers/irqchip/Kconfig | 32 +- drivers/irqchip/Makefile | 2 + drivers/irqchip/irq-riscv-aplic.c | 656 +++++++++ drivers/irqchip/irq-riscv-imsic.c | 1207 +++++++++++++++++ drivers/irqchip/irq-riscv-intc.c | 37 +- include/linux/irqchip/riscv-aplic.h | 117 ++ include/linux/irqchip/riscv-imsic.h | 92 ++ 15 files changed, 2564 insertions(+), 7 deletions(-) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml create mode 100644 drivers/irqchip/irq-riscv-aplic.c create mode 100644 drivers/irqchip/irq-riscv-imsic.c create mode 100644 include/linux/irqchip/riscv-aplic.h create mode 100644 include/linux/irqchip/riscv-imsic.h
Quoted 3 lines
--
2.34.1
I am seeing the following boot failure with your branch and upstream qemu (tag: v7.2.0-rc0).
It seems IPIs are probably not getting delivered after a point. I saw that IPIs are delivered in the same path earlier (via gdb).
[ 0.990152] NET: Registered PF_INET6 protocol family [ 1.004885] Segment Routing with IPv6 [ 1.005385] In-situ OAM (IOAM) with IPv6 [ 1.006371] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.011609] NET: Registered PF_PACKET protocol family [ 1.014877] 9pnet: Installing 9P2000 support [ 1.015603] Key type dns_resolver registered [ 1.026396] debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers [ 1.144097] EXT4-fs (vda2): recovery complete [ 1.146345] EXT4-fs (vda2): mounted filesystem with ordered data mode. Quota mode: disabled. [ 1.147020] VFS: Mounted root (ext4 filesystem) on device 254:2. [ 1.152238] devtmpfs: mounted [ 1.183914] Freeing unused kernel image (initmem) memory: 2176K [ 1.185898] Run /sbin/init as init process [ 29.412287] rcu: INFO: rcu_sched self-detected stall on CPU [ 29.412992] rcu: 3-....: (5250 ticks this GP) idle=fc3c/1/0x4000000000000002 softirq=78/78 fqs=2230 [ 29.413427] (t=5251 jiffies g=-1047 q=3 ncpus=8) [ 29.414199] CPU: 3 PID: 1 Comm: init Not tainted 6.1.0-rc4-00024-g5b711f2d7b91 #198 [ 29.414578] Hardware name: riscv-virtio,qemu (DT) [ 29.414896] epc : smp_call_function_many_cond+0x138/0x372 [ 29.415157] ra : smp_call_function_many_cond+0x154/0x372 [ 29.415318] epc : ffffffff8008d2e6 ra : ffffffff8008d302 sp : ff2000000004bb40 [ 29.415512] gp : ffffffff812e9eb0 tp : ff600000016d8000 t0 : ff6000007ed88610 [ 29.415686] t1 : 00000000000000ff t2 : 0000000000000002 s0 : ff2000000004bc00 [ 29.415837] s1 : ff6000007ed85448 a0 : 0000000000000007 a1 : 00000000000000f7 [ 29.416008] a2 : 0000000000000000 a3 : 0000000000000000 a4 : ff6000007edd1780 [ 29.416188] a5 : 0000000000000001 a6 : ffffffff812eb1c0 a7 : ff600000016d8000 [ 29.416613] s2 : ffffffff81323c30 s3 : ffffffff812e9964 s4 : 0000000000000000 [ 29.416810] s5 : 0000000000000000 s6 : ff6000007ed85440 s7 : 0000000000000038 [ 29.416997] s8 : 0000000000000003 s9 : ffffffff81323c30 s10: ff6000007ed85448 [ 29.417159] s11: 0000000000000008 t3 : 00ffffffad08a000 t4 : ff60000001613e0c [ 29.417331] t5 : 0000000000000000 t6 : 00ffffffad177fff [ 29.417482] status: 0000000200000120 badaddr: 0000000000000000 cause: 8000000000000005 [ 29.417939] [<ffffffff8008d590>] on_each_cpu_cond_mask+0x20/0x32 [ 29.418179] [<ffffffff80008d32>] flush_icache_all+0x38/0x40 [ 29.418324] [<ffffffff80008eb2>] flush_icache_pte+0x4a/0x7a [ 29.418442] [<ffffffff80139e00>] do_set_pte+0x132/0x192 [ 29.418594] [<ffffffff8010b42e>] filemap_map_pages+0x178/0x3a0 [ 29.418738] [<ffffffff8013ad00>] __handle_mm_fault+0x992/0xbac [ 29.418876] [<ffffffff8013afde>] handle_mm_fault+0xc4/0x1d4 [ 29.419010] [<ffffffff80008372>] do_page_fault+0x120/0x326 [ 29.419145] [<ffffffff800033e6>] ret_from_exception+0x0/0xc
Signature · 2 lines
Regards, Atish
Quoted 125 lines · Atish Patra
Quoted 65 lines · Anup Patel
The RISC-V AIA specification is now frozen as-per the RISC-V international process. The latest frozen specifcation can be found at:
https://github.com/riscv/riscv-aia/releases/download/1.0-RC1/riscv-interrupts-1.0-RC1.pdfAt a high-level, the AIA specification adds three things:
1) AIA CSRs
- Improved local interrupt support
2) Incoming Message Signaled Interrupt Controller (IMSIC)
- Per-HART MSI controller
- Support MSI virtualization
- Support IPI along with virtualization
3) Advanced Platform-Level Interrupt Controller (APLIC)
- Wired interrupt controller
- In MSI-mode, converts wired interrupt into MSIs (i.e. MSI generator)
- In Direct-mode, injects external interrupts directly into HARTsFor an overview of the AIA specification, refer the recent AIA virtualization talk at KVM Forum 2022:
https://static.sched.com/hosted_files/kvmforum2022/a1/AIA_Virtualization_in_KVM_RISCV_final.pdf
https://www.youtube.com/watch?v=r071dL8Z0yoThis series adds required Linux irqchip drivers for AIA and it depends on the recent "RISC-V IPI Improvements".
(Refer, https://lore.kernel.org/lkml/[email protected]/t/)To test this series, use QEMU v7.1 (or higher) and OpenSBI v1.1 (or higher).
These patches can also be found in the
riscv_aia_v1branch at:
https://github.com/avpatel/linux.gitAnup Patel (9):
RISC-V: Add AIA related CSR defines
RISC-V: Detect AIA CSRs from ISA string irqchip/riscv-intc: Add support for RISC-V AIA
dt-bindings: Add RISC-V incoming MSI controller bindings
irqchip: Add RISC-V incoming MSI controller driver
dt-bindings: Add RISC-V advanced PLIC bindings
irqchip: Add RISC-V advanced PLIC driver
RISC-V: Select APLIC and IMSIC drivers for QEMU virt machine
MAINTAINERS: Add entry for RISC-V AIA drivers.../interrupt-controller/riscv,aplic.yaml | 136 ++ .../interrupt-controller/riscv,imsic.yaml | 174 +++ MAINTAINERS | 12 + arch/riscv/Kconfig.socs | 2 + arch/riscv/include/asm/csr.h | 92 ++ arch/riscv/include/asm/hwcap.h | 8 + arch/riscv/kernel/cpu.c | 2 + arch/riscv/kernel/cpufeature.c | 2 + drivers/irqchip/Kconfig | 32 +- drivers/irqchip/Makefile | 2 + drivers/irqchip/irq-riscv-aplic.c | 656 +++++++++ drivers/irqchip/irq-riscv-imsic.c | 1207 +++++++++++++++++ drivers/irqchip/irq-riscv-intc.c | 37 +- include/linux/irqchip/riscv-aplic.h | 117 ++ include/linux/irqchip/riscv-imsic.h | 92 ++ 15 files changed, 2564 insertions(+), 7 deletions(-) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml create mode 100644 drivers/irqchip/irq-riscv-aplic.c create mode 100644 drivers/irqchip/irq-riscv-imsic.c create mode 100644 include/linux/irqchip/riscv-aplic.h create mode 100644 include/linux/irqchip/riscv-imsic.hQuoted 3 lines
--
2.34.1I am seeing the following boot failure with your branch and upstream qemu (tag: v7.2.0-rc0).
It seems IPIs are probably not getting delivered after a point. I saw that IPIs are delivered in the same path earlier (via gdb).[ 0.990152] NET: Registered PF_INET6 protocol family [ 1.004885] Segment Routing with IPv6 [ 1.005385] In-situ OAM (IOAM) with IPv6 [ 1.006371] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.011609] NET: Registered PF_PACKET protocol family [ 1.014877] 9pnet: Installing 9P2000 support [ 1.015603] Key type dns_resolver registered [ 1.026396] debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers [ 1.144097] EXT4-fs (vda2): recovery complete [ 1.146345] EXT4-fs (vda2): mounted filesystem with ordered data mode. Quota mode: disabled. [ 1.147020] VFS: Mounted root (ext4 filesystem) on device 254:2. [ 1.152238] devtmpfs: mounted [ 1.183914] Freeing unused kernel image (initmem) memory: 2176K [ 1.185898] Run /sbin/init as init process [ 29.412287] rcu: INFO: rcu_sched self-detected stall on CPU [ 29.412992] rcu: 3-....: (5250 ticks this GP) idle=fc3c/1/0x4000000000000002 softirq=78/78 fqs=2230 [ 29.413427] (t=5251 jiffies g=-1047 q=3 ncpus=8) [ 29.414199] CPU: 3 PID: 1 Comm: init Not tainted 6.1.0-rc4-00024-g5b711f2d7b91 #198 [ 29.414578] Hardware name: riscv-virtio,qemu (DT) [ 29.414896] epc : smp_call_function_many_cond+0x138/0x372 [ 29.415157] ra : smp_call_function_many_cond+0x154/0x372 [ 29.415318] epc : ffffffff8008d2e6 ra : ffffffff8008d302 sp : ff2000000004bb40 [ 29.415512] gp : ffffffff812e9eb0 tp : ff600000016d8000 t0 : ff6000007ed88610 [ 29.415686] t1 : 00000000000000ff t2 : 0000000000000002 s0 : ff2000000004bc00 [ 29.415837] s1 : ff6000007ed85448 a0 : 0000000000000007 a1 : 00000000000000f7 [ 29.416008] a2 : 0000000000000000 a3 : 0000000000000000 a4 : ff6000007edd1780 [ 29.416188] a5 : 0000000000000001 a6 : ffffffff812eb1c0 a7 : ff600000016d8000 [ 29.416613] s2 : ffffffff81323c30 s3 : ffffffff812e9964 s4 : 0000000000000000 [ 29.416810] s5 : 0000000000000000 s6 : ff6000007ed85440 s7 : 0000000000000038 [ 29.416997] s8 : 0000000000000003 s9 : ffffffff81323c30 s10: ff6000007ed85448 [ 29.417159] s11: 0000000000000008 t3 : 00ffffffad08a000 t4 : ff60000001613e0c [ 29.417331] t5 : 0000000000000000 t6 : 00ffffffad177fff [ 29.417482] status: 0000000200000120 badaddr: 0000000000000000 cause: 8000000000000005 [ 29.417939] [<ffffffff8008d590>] on_each_cpu_cond_mask+0x20/0x32
Quoted 10 lines
[ 29.418179] [<ffffffff80008d32>] flush_icache_all+0x38/0x40 [ 29.418324] [<ffffffff80008eb2>] flush_icache_pte+0x4a/0x7a [ 29.418442] [<ffffffff80139e00>] do_set_pte+0x132/0x192 [ 29.418594] [<ffffffff8010b42e>] filemap_map_pages+0x178/0x3a0 [ 29.418738] [<ffffffff8013ad00>] __handle_mm_fault+0x992/0xbac [ 29.418876] [<ffffffff8013afde>] handle_mm_fault+0xc4/0x1d4 [ 29.419010] [<ffffffff80008372>] do_page_fault+0x120/0x326 [ 29.419145] [<ffffffff800033e6>] ret_from_exception+0x0/0xc
Sorry. I forgot to mention that this happens while booting Fedora on an 8 cpu virt machine.
I am yet to reproduce this issue for 4 or 2 cpus.
Quoted 4 lines
--
Regards,
Atish
Signature · 2 lines
Regards, Atish
Quoted 138 lines · Atish Patra
Quoted 125 lines · Atish Patra
Quoted 65 lines · Anup Patel
The RISC-V AIA specification is now frozen as-per the RISC-V international process. The latest frozen specifcation can be found at:
https://github.com/riscv/riscv-aia/releases/download/1.0-RC1/riscv-interrupts-1.0-RC1.pdfAt a high-level, the AIA specification adds three things:
1) AIA CSRs
- Improved local interrupt support
2) Incoming Message Signaled Interrupt Controller (IMSIC)
- Per-HART MSI controller
- Support MSI virtualization
- Support IPI along with virtualization
3) Advanced Platform-Level Interrupt Controller (APLIC)
- Wired interrupt controller
- In MSI-mode, converts wired interrupt into MSIs (i.e. MSI generator)
- In Direct-mode, injects external interrupts directly into HARTsFor an overview of the AIA specification, refer the recent AIA virtualization talk at KVM Forum 2022:
https://static.sched.com/hosted_files/kvmforum2022/a1/AIA_Virtualization_in_KVM_RISCV_final.pdf
https://www.youtube.com/watch?v=r071dL8Z0yoThis series adds required Linux irqchip drivers for AIA and it depends on the recent "RISC-V IPI Improvements".
(Refer, https://lore.kernel.org/lkml/[email protected]/t/)To test this series, use QEMU v7.1 (or higher) and OpenSBI v1.1 (or higher).
These patches can also be found in the
riscv_aia_v1branch at:
https://github.com/avpatel/linux.gitAnup Patel (9):
RISC-V: Add AIA related CSR defines
RISC-V: Detect AIA CSRs from ISA string irqchip/riscv-intc: Add support for RISC-V AIA
dt-bindings: Add RISC-V incoming MSI controller bindings
irqchip: Add RISC-V incoming MSI controller driver
dt-bindings: Add RISC-V advanced PLIC bindings
irqchip: Add RISC-V advanced PLIC driver
RISC-V: Select APLIC and IMSIC drivers for QEMU virt machine
MAINTAINERS: Add entry for RISC-V AIA drivers.../interrupt-controller/riscv,aplic.yaml | 136 ++ .../interrupt-controller/riscv,imsic.yaml | 174 +++ MAINTAINERS | 12 + arch/riscv/Kconfig.socs | 2 + arch/riscv/include/asm/csr.h | 92 ++ arch/riscv/include/asm/hwcap.h | 8 + arch/riscv/kernel/cpu.c | 2 + arch/riscv/kernel/cpufeature.c | 2 + drivers/irqchip/Kconfig | 32 +- drivers/irqchip/Makefile | 2 + drivers/irqchip/irq-riscv-aplic.c | 656 +++++++++ drivers/irqchip/irq-riscv-imsic.c | 1207 +++++++++++++++++ drivers/irqchip/irq-riscv-intc.c | 37 +- include/linux/irqchip/riscv-aplic.h | 117 ++ include/linux/irqchip/riscv-imsic.h | 92 ++ 15 files changed, 2564 insertions(+), 7 deletions(-) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml create mode 100644 drivers/irqchip/irq-riscv-aplic.c create mode 100644 drivers/irqchip/irq-riscv-imsic.c create mode 100644 include/linux/irqchip/riscv-aplic.h create mode 100644 include/linux/irqchip/riscv-imsic.hQuoted 3 lines
--
2.34.1I am seeing the following boot failure with your branch and upstream qemu (tag: v7.2.0-rc0).
It seems IPIs are probably not getting delivered after a point. I saw that IPIs are delivered in the same path earlier (via gdb).[ 0.990152] NET: Registered PF_INET6 protocol family [ 1.004885] Segment Routing with IPv6 [ 1.005385] In-situ OAM (IOAM) with IPv6 [ 1.006371] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.011609] NET: Registered PF_PACKET protocol family [ 1.014877] 9pnet: Installing 9P2000 support [ 1.015603] Key type dns_resolver registered [ 1.026396] debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers [ 1.144097] EXT4-fs (vda2): recovery complete [ 1.146345] EXT4-fs (vda2): mounted filesystem with ordered data mode. Quota mode: disabled. [ 1.147020] VFS: Mounted root (ext4 filesystem) on device 254:2. [ 1.152238] devtmpfs: mounted [ 1.183914] Freeing unused kernel image (initmem) memory: 2176K [ 1.185898] Run /sbin/init as init process [ 29.412287] rcu: INFO: rcu_sched self-detected stall on CPU [ 29.412992] rcu: 3-....: (5250 ticks this GP) idle=fc3c/1/0x4000000000000002 softirq=78/78 fqs=2230 [ 29.413427] (t=5251 jiffies g=-1047 q=3 ncpus=8) [ 29.414199] CPU: 3 PID: 1 Comm: init Not tainted 6.1.0-rc4-00024-g5b711f2d7b91 #198 [ 29.414578] Hardware name: riscv-virtio,qemu (DT) [ 29.414896] epc : smp_call_function_many_cond+0x138/0x372 [ 29.415157] ra : smp_call_function_many_cond+0x154/0x372 [ 29.415318] epc : ffffffff8008d2e6 ra : ffffffff8008d302 sp : ff2000000004bb40 [ 29.415512] gp : ffffffff812e9eb0 tp : ff600000016d8000 t0 : ff6000007ed88610 [ 29.415686] t1 : 00000000000000ff t2 : 0000000000000002 s0 : ff2000000004bc00 [ 29.415837] s1 : ff6000007ed85448 a0 : 0000000000000007 a1 : 00000000000000f7 [ 29.416008] a2 : 0000000000000000 a3 : 0000000000000000 a4 : ff6000007edd1780 [ 29.416188] a5 : 0000000000000001 a6 : ffffffff812eb1c0 a7 : ff600000016d8000 [ 29.416613] s2 : ffffffff81323c30 s3 : ffffffff812e9964 s4 : 0000000000000000 [ 29.416810] s5 : 0000000000000000 s6 : ff6000007ed85440 s7 : 0000000000000038 [ 29.416997] s8 : 0000000000000003 s9 : ffffffff81323c30 s10: ff6000007ed85448 [ 29.417159] s11: 0000000000000008 t3 : 00ffffffad08a000 t4 : ff60000001613e0c [ 29.417331] t5 : 0000000000000000 t6 : 00ffffffad177fff [ 29.417482] status: 0000000200000120 badaddr: 0000000000000000 cause: 8000000000000005 [ 29.417939] [<ffffffff8008d590>] on_each_cpu_cond_mask+0x20/0x32Quoted 10 lines
[ 29.418179] [<ffffffff80008d32>] flush_icache_all+0x38/0x40 [ 29.418324] [<ffffffff80008eb2>] flush_icache_pte+0x4a/0x7a [ 29.418442] [<ffffffff80139e00>] do_set_pte+0x132/0x192 [ 29.418594] [<ffffffff8010b42e>] filemap_map_pages+0x178/0x3a0 [ 29.418738] [<ffffffff8013ad00>] __handle_mm_fault+0x992/0xbac [ 29.418876] [<ffffffff8013afde>] handle_mm_fault+0xc4/0x1d4 [ 29.419010] [<ffffffff80008372>] do_page_fault+0x120/0x326 [ 29.419145] [<ffffffff800033e6>] ret_from_exception+0x0/0xc
Quoted 4 lines
Sorry. I forgot to mention that this happens while booting Fedora on an 8 cpu virt machine.
I am yet to reproduce this issue for 4 or 2 cpus.
This warning splat appears with 4 cpus though.
[ 126.977213] e1000e 0000:00:02.0 enp0s2: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 126.988275] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s2: link becomes ready [ 128.210090] ------------[ cut here ]------------ [ 128.210476] WARNING: CPU: 0 PID: 294 at drivers/irqchip/irq-riscv-aplic.c:318 aplic_msi_write_msg+0x110/0x12a [ 128.211702] Modules linked in: [ 128.212473] CPU: 0 PID: 294 Comm: (agetty) Not tainted 6.1.0-rc4-00024-g5b711f2d7b91 #198 [ 128.212839] Hardware name: riscv-virtio,qemu (DT) [ 128.213459] epc : aplic_msi_write_msg+0x110/0x12a [ 128.213652] ra : aplic_msi_write_msg+0x1c/0x12a [ 128.213823] epc : ffffffff8039eb80 ra : ffffffff8039ea8c sp : ff2000001054bb10 [ 128.213884] gp : ffffffff812e9eb0 tp : ff600000032d3840 t0 : 0000000000000002 [ 128.213945] t1 : 0000000000000008 t2 : 0000000000000040 s0 : ff2000001054bb30 [ 128.214015] s1 : ff600000018443a8 a0 : ff600000017e8c30 a1 : 0000000000000000 [ 128.214083] a2 : 0000000000000001 a3 : 000000000000000c a4 : 0000000000000003 [ 128.214141] a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000000000000 [ 128.214173] s2 : ff2000001054bb40 s3 : ff600000017e8c30 s4 : 0000000200000022 [ 128.214246] s5 : ff600000017e8d78 s6 : 000000000000000c s7 : ff600000017e8cb0 [ 128.214295] s8 : ffffffff80c5c8f0 s9 : ff6000000e97ab60 s10: 0000000000000000 [ 128.214327] s11: ff6000000e97ab78 t3 : 0000000000000004 t4 : 0000000000000002 [ 128.214383] t5 : 0000000000000000 t6 : 0000000000028000 [ 128.214414] status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003 [ 128.215267] [<ffffffff80453060>] platform_msi_write_msg+0x18/0x20 [ 128.215413] [<ffffffff80060b7a>] msi_domain_deactivate+0x2a/0x48 [ 128.215432] [<ffffffff8005e5a2>] __irq_domain_deactivate_irq+0x1c/0x30 [ 128.215450] [<ffffffff8005e5aa>] __irq_domain_deactivate_irq+0x24/0x30 [ 128.215464] [<ffffffff8005f9ea>] irq_domain_deactivate_irq+0x1c/0x30 [ 128.215477] [<ffffffff8005b8f6>] free_irq+0x1d0/0x27c [ 128.219393] [<ffffffff8041be06>] univ8250_release_irq+0xa4/0xaa [ 128.219417] [<ffffffff8041e018>] serial8250_do_shutdown+0xf0/0x166 [ 128.219431] [<ffffffff8041e0a8>] serial8250_shutdown+0x1a/0x22 [ 128.219444] [<ffffffff804174f0>] uart_port_shutdown+0x2c/0x42 [ 128.220230] [<ffffffff8041908a>] uart_shutdown+0x66/0x11e [ 128.220247] [<ffffffff8041a69a>] uart_hangup+0x5e/0x100 [ 128.220260] [<ffffffff803fdaa2>] __tty_hangup.part.0+0x286/0x2ac [ 128.220859] [<ffffffff803fec6c>] tty_ioctl+0x684/0x802 [ 128.220875] [<ffffffff8019ec48>] sys_ioctl+0x37e/0x95e [ 128.221284] [<ffffffff800033d8>] ret_from_syscall+0x0/0x2 [ 128.221653] ---[ end trace 0000000000000000 ]---
Quoted 10 lines
Quoted 4 lines
--
Regards,
Atish--
Regards,
Atish
Signature · 2 lines
Regards, Atish
Anup Patel
maintainerQuoted 191 lines · Atish Patra
Quoted 138 lines · Atish Patra
Quoted 125 lines · Atish Patra
Quoted 65 lines · Anup Patel
The RISC-V AIA specification is now frozen as-per the RISC-V international process. The latest frozen specifcation can be found at:
https://github.com/riscv/riscv-aia/releases/download/1.0-RC1/riscv-interrupts-1.0-RC1.pdfAt a high-level, the AIA specification adds three things:
1) AIA CSRs
- Improved local interrupt support
2) Incoming Message Signaled Interrupt Controller (IMSIC)
- Per-HART MSI controller
- Support MSI virtualization
- Support IPI along with virtualization
3) Advanced Platform-Level Interrupt Controller (APLIC)
- Wired interrupt controller
- In MSI-mode, converts wired interrupt into MSIs (i.e. MSI generator)
- In Direct-mode, injects external interrupts directly into HARTsFor an overview of the AIA specification, refer the recent AIA virtualization talk at KVM Forum 2022:
https://static.sched.com/hosted_files/kvmforum2022/a1/AIA_Virtualization_in_KVM_RISCV_final.pdf
https://www.youtube.com/watch?v=r071dL8Z0yoThis series adds required Linux irqchip drivers for AIA and it depends on the recent "RISC-V IPI Improvements".
(Refer, https://lore.kernel.org/lkml/[email protected]/t/)To test this series, use QEMU v7.1 (or higher) and OpenSBI v1.1 (or higher).
These patches can also be found in the
riscv_aia_v1branch at:
https://github.com/avpatel/linux.gitAnup Patel (9):
RISC-V: Add AIA related CSR defines
RISC-V: Detect AIA CSRs from ISA string irqchip/riscv-intc: Add support for RISC-V AIA
dt-bindings: Add RISC-V incoming MSI controller bindings
irqchip: Add RISC-V incoming MSI controller driver
dt-bindings: Add RISC-V advanced PLIC bindings
irqchip: Add RISC-V advanced PLIC driver
RISC-V: Select APLIC and IMSIC drivers for QEMU virt machine
MAINTAINERS: Add entry for RISC-V AIA drivers.../interrupt-controller/riscv,aplic.yaml | 136 ++ .../interrupt-controller/riscv,imsic.yaml | 174 +++ MAINTAINERS | 12 + arch/riscv/Kconfig.socs | 2 + arch/riscv/include/asm/csr.h | 92 ++ arch/riscv/include/asm/hwcap.h | 8 + arch/riscv/kernel/cpu.c | 2 + arch/riscv/kernel/cpufeature.c | 2 + drivers/irqchip/Kconfig | 32 +- drivers/irqchip/Makefile | 2 + drivers/irqchip/irq-riscv-aplic.c | 656 +++++++++ drivers/irqchip/irq-riscv-imsic.c | 1207 +++++++++++++++++ drivers/irqchip/irq-riscv-intc.c | 37 +- include/linux/irqchip/riscv-aplic.h | 117 ++ include/linux/irqchip/riscv-imsic.h | 92 ++ 15 files changed, 2564 insertions(+), 7 deletions(-) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml create mode 100644 drivers/irqchip/irq-riscv-aplic.c create mode 100644 drivers/irqchip/irq-riscv-imsic.c create mode 100644 include/linux/irqchip/riscv-aplic.h create mode 100644 include/linux/irqchip/riscv-imsic.hQuoted 3 lines
--
2.34.1I am seeing the following boot failure with your branch and upstream qemu (tag: v7.2.0-rc0).
It seems IPIs are probably not getting delivered after a point. I saw that IPIs are delivered in the same path earlier (via gdb).[ 0.990152] NET: Registered PF_INET6 protocol family [ 1.004885] Segment Routing with IPv6 [ 1.005385] In-situ OAM (IOAM) with IPv6 [ 1.006371] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.011609] NET: Registered PF_PACKET protocol family [ 1.014877] 9pnet: Installing 9P2000 support [ 1.015603] Key type dns_resolver registered [ 1.026396] debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers [ 1.144097] EXT4-fs (vda2): recovery complete [ 1.146345] EXT4-fs (vda2): mounted filesystem with ordered data mode. Quota mode: disabled. [ 1.147020] VFS: Mounted root (ext4 filesystem) on device 254:2. [ 1.152238] devtmpfs: mounted [ 1.183914] Freeing unused kernel image (initmem) memory: 2176K [ 1.185898] Run /sbin/init as init process [ 29.412287] rcu: INFO: rcu_sched self-detected stall on CPU [ 29.412992] rcu: 3-....: (5250 ticks this GP) idle=fc3c/1/0x4000000000000002 softirq=78/78 fqs=2230 [ 29.413427] (t=5251 jiffies g=-1047 q=3 ncpus=8) [ 29.414199] CPU: 3 PID: 1 Comm: init Not tainted 6.1.0-rc4-00024-g5b711f2d7b91 #198 [ 29.414578] Hardware name: riscv-virtio,qemu (DT) [ 29.414896] epc : smp_call_function_many_cond+0x138/0x372 [ 29.415157] ra : smp_call_function_many_cond+0x154/0x372 [ 29.415318] epc : ffffffff8008d2e6 ra : ffffffff8008d302 sp : ff2000000004bb40 [ 29.415512] gp : ffffffff812e9eb0 tp : ff600000016d8000 t0 : ff6000007ed88610 [ 29.415686] t1 : 00000000000000ff t2 : 0000000000000002 s0 : ff2000000004bc00 [ 29.415837] s1 : ff6000007ed85448 a0 : 0000000000000007 a1 : 00000000000000f7 [ 29.416008] a2 : 0000000000000000 a3 : 0000000000000000 a4 : ff6000007edd1780 [ 29.416188] a5 : 0000000000000001 a6 : ffffffff812eb1c0 a7 : ff600000016d8000 [ 29.416613] s2 : ffffffff81323c30 s3 : ffffffff812e9964 s4 : 0000000000000000 [ 29.416810] s5 : 0000000000000000 s6 : ff6000007ed85440 s7 : 0000000000000038 [ 29.416997] s8 : 0000000000000003 s9 : ffffffff81323c30 s10: ff6000007ed85448 [ 29.417159] s11: 0000000000000008 t3 : 00ffffffad08a000 t4 : ff60000001613e0c [ 29.417331] t5 : 0000000000000000 t6 : 00ffffffad177fff [ 29.417482] status: 0000000200000120 badaddr: 0000000000000000 cause: 8000000000000005 [ 29.417939] [<ffffffff8008d590>] on_each_cpu_cond_mask+0x20/0x32Quoted 10 lines
[ 29.418179] [<ffffffff80008d32>] flush_icache_all+0x38/0x40 [ 29.418324] [<ffffffff80008eb2>] flush_icache_pte+0x4a/0x7a [ 29.418442] [<ffffffff80139e00>] do_set_pte+0x132/0x192 [ 29.418594] [<ffffffff8010b42e>] filemap_map_pages+0x178/0x3a0 [ 29.418738] [<ffffffff8013ad00>] __handle_mm_fault+0x992/0xbac [ 29.418876] [<ffffffff8013afde>] handle_mm_fault+0xc4/0x1d4 [ 29.419010] [<ffffffff80008372>] do_page_fault+0x120/0x326 [ 29.419145] [<ffffffff800033e6>] ret_from_exception+0x0/0xcQuoted 4 lines
Sorry. I forgot to mention that this happens while booting Fedora on an 8 cpu virt machine.
I am yet to reproduce this issue for 4 or 2 cpus.This warning splat appears with 4 cpus though.
[ 126.977213] e1000e 0000:00:02.0 enp0s2: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 126.988275] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s2: link becomes ready [ 128.210090] ------------[ cut here ]------------ [ 128.210476] WARNING: CPU: 0 PID: 294 at drivers/irqchip/irq-riscv-aplic.c:318 aplic_msi_write_msg+0x110/0x12a [ 128.211702] Modules linked in: [ 128.212473] CPU: 0 PID: 294 Comm: (agetty) Not tainted 6.1.0-rc4-00024-g5b711f2d7b91 #198 [ 128.212839] Hardware name: riscv-virtio,qemu (DT) [ 128.213459] epc : aplic_msi_write_msg+0x110/0x12a [ 128.213652] ra : aplic_msi_write_msg+0x1c/0x12a [ 128.213823] epc : ffffffff8039eb80 ra : ffffffff8039ea8c sp : ff2000001054bb10 [ 128.213884] gp : ffffffff812e9eb0 tp : ff600000032d3840 t0 : 0000000000000002 [ 128.213945] t1 : 0000000000000008 t2 : 0000000000000040 s0 : ff2000001054bb30 [ 128.214015] s1 : ff600000018443a8 a0 : ff600000017e8c30 a1 : 0000000000000000 [ 128.214083] a2 : 0000000000000001 a3 : 000000000000000c a4 : 0000000000000003 [ 128.214141] a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000000000000 [ 128.214173] s2 : ff2000001054bb40 s3 : ff600000017e8c30 s4 : 0000000200000022 [ 128.214246] s5 : ff600000017e8d78 s6 : 000000000000000c s7 : ff600000017e8cb0 [ 128.214295] s8 : ffffffff80c5c8f0 s9 : ff6000000e97ab60 s10: 0000000000000000 [ 128.214327] s11: ff6000000e97ab78 t3 : 0000000000000004 t4 : 0000000000000002 [ 128.214383] t5 : 0000000000000000 t6 : 0000000000028000 [ 128.214414] status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003 [ 128.215267] [<ffffffff80453060>] platform_msi_write_msg+0x18/0x20 [ 128.215413] [<ffffffff80060b7a>] msi_domain_deactivate+0x2a/0x48 [ 128.215432] [<ffffffff8005e5a2>] __irq_domain_deactivate_irq+0x1c/0x30 [ 128.215450] [<ffffffff8005e5aa>] __irq_domain_deactivate_irq+0x24/0x30 [ 128.215464] [<ffffffff8005f9ea>] irq_domain_deactivate_irq+0x1c/0x30 [ 128.215477] [<ffffffff8005b8f6>] free_irq+0x1d0/0x27c [ 128.219393] [<ffffffff8041be06>] univ8250_release_irq+0xa4/0xaa [ 128.219417] [<ffffffff8041e018>] serial8250_do_shutdown+0xf0/0x166 [ 128.219431] [<ffffffff8041e0a8>] serial8250_shutdown+0x1a/0x22
Quoted 8 lines
[ 128.219444] [<ffffffff804174f0>] uart_port_shutdown+0x2c/0x42 [ 128.220230] [<ffffffff8041908a>] uart_shutdown+0x66/0x11e [ 128.220247] [<ffffffff8041a69a>] uart_hangup+0x5e/0x100 [ 128.220260] [<ffffffff803fdaa2>] __tty_hangup.part.0+0x286/0x2ac [ 128.220859] [<ffffffff803fec6c>] tty_ioctl+0x684/0x802 [ 128.220875] [<ffffffff8019ec48>] sys_ioctl+0x37e/0x95e [ 128.221284] [<ffffffff800033d8>] ret_from_syscall+0x0/0x2 [ 128.221653] ---[ end trace 0000000000000000 ]---
I will address this in v2 of the AIA series.
Regards,
Anup
Quoted 18 lines
Quoted 9 lines
Quoted 6 lines
--
Regards,
AtishQuoted 3 lines
--
Regards,
Atish--
Regards,
Atish
Anup Patel
maintainerQuoted 125 lines · Atish Patra
Quoted 65 lines · Anup Patel
The RISC-V AIA specification is now frozen as-per the RISC-V international process. The latest frozen specifcation can be found at:
https://github.com/riscv/riscv-aia/releases/download/1.0-RC1/riscv-interrupts-1.0-RC1.pdfAt a high-level, the AIA specification adds three things:
1) AIA CSRs
- Improved local interrupt support
2) Incoming Message Signaled Interrupt Controller (IMSIC)
- Per-HART MSI controller
- Support MSI virtualization
- Support IPI along with virtualization
3) Advanced Platform-Level Interrupt Controller (APLIC)
- Wired interrupt controller
- In MSI-mode, converts wired interrupt into MSIs (i.e. MSI generator)
- In Direct-mode, injects external interrupts directly into HARTsFor an overview of the AIA specification, refer the recent AIA virtualization talk at KVM Forum 2022:
https://static.sched.com/hosted_files/kvmforum2022/a1/AIA_Virtualization_in_KVM_RISCV_final.pdf
https://www.youtube.com/watch?v=r071dL8Z0yoThis series adds required Linux irqchip drivers for AIA and it depends on the recent "RISC-V IPI Improvements".
(Refer, https://lore.kernel.org/lkml/[email protected]/t/)To test this series, use QEMU v7.1 (or higher) and OpenSBI v1.1 (or higher).
These patches can also be found in the
riscv_aia_v1branch at:
https://github.com/avpatel/linux.gitAnup Patel (9):
RISC-V: Add AIA related CSR defines
RISC-V: Detect AIA CSRs from ISA string irqchip/riscv-intc: Add support for RISC-V AIA
dt-bindings: Add RISC-V incoming MSI controller bindings
irqchip: Add RISC-V incoming MSI controller driver
dt-bindings: Add RISC-V advanced PLIC bindings
irqchip: Add RISC-V advanced PLIC driver
RISC-V: Select APLIC and IMSIC drivers for QEMU virt machine
MAINTAINERS: Add entry for RISC-V AIA drivers.../interrupt-controller/riscv,aplic.yaml | 136 ++ .../interrupt-controller/riscv,imsic.yaml | 174 +++ MAINTAINERS | 12 + arch/riscv/Kconfig.socs | 2 + arch/riscv/include/asm/csr.h | 92 ++ arch/riscv/include/asm/hwcap.h | 8 + arch/riscv/kernel/cpu.c | 2 + arch/riscv/kernel/cpufeature.c | 2 + drivers/irqchip/Kconfig | 32 +- drivers/irqchip/Makefile | 2 + drivers/irqchip/irq-riscv-aplic.c | 656 +++++++++ drivers/irqchip/irq-riscv-imsic.c | 1207 +++++++++++++++++ drivers/irqchip/irq-riscv-intc.c | 37 +- include/linux/irqchip/riscv-aplic.h | 117 ++ include/linux/irqchip/riscv-imsic.h | 92 ++ 15 files changed, 2564 insertions(+), 7 deletions(-) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,imsic.yaml create mode 100644 drivers/irqchip/irq-riscv-aplic.c create mode 100644 drivers/irqchip/irq-riscv-imsic.c create mode 100644 include/linux/irqchip/riscv-aplic.h create mode 100644 include/linux/irqchip/riscv-imsic.hQuoted 3 lines
--
2.34.1I am seeing the following boot failure with your branch and upstream qemu (tag: v7.2.0-rc0).
It seems IPIs are probably not getting delivered after a point. I saw that IPIs are delivered in the same path earlier (via gdb).[ 0.990152] NET: Registered PF_INET6 protocol family [ 1.004885] Segment Routing with IPv6 [ 1.005385] In-situ OAM (IOAM) with IPv6 [ 1.006371] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.011609] NET: Registered PF_PACKET protocol family [ 1.014877] 9pnet: Installing 9P2000 support [ 1.015603] Key type dns_resolver registered [ 1.026396] debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers [ 1.144097] EXT4-fs (vda2): recovery complete [ 1.146345] EXT4-fs (vda2): mounted filesystem with ordered data mode. Quota mode: disabled. [ 1.147020] VFS: Mounted root (ext4 filesystem) on device 254:2. [ 1.152238] devtmpfs: mounted [ 1.183914] Freeing unused kernel image (initmem) memory: 2176K [ 1.185898] Run /sbin/init as init process [ 29.412287] rcu: INFO: rcu_sched self-detected stall on CPU [ 29.412992] rcu: 3-....: (5250 ticks this GP) idle=fc3c/1/0x4000000000000002 softirq=78/78 fqs=2230 [ 29.413427] (t=5251 jiffies g=-1047 q=3 ncpus=8) [ 29.414199] CPU: 3 PID: 1 Comm: init Not tainted 6.1.0-rc4-00024-g5b711f2d7b91 #198 [ 29.414578] Hardware name: riscv-virtio,qemu (DT) [ 29.414896] epc : smp_call_function_many_cond+0x138/0x372 [ 29.415157] ra : smp_call_function_many_cond+0x154/0x372 [ 29.415318] epc : ffffffff8008d2e6 ra : ffffffff8008d302 sp : ff2000000004bb40 [ 29.415512] gp : ffffffff812e9eb0 tp : ff600000016d8000 t0 : ff6000007ed88610 [ 29.415686] t1 : 00000000000000ff t2 : 0000000000000002 s0 : ff2000000004bc00 [ 29.415837] s1 : ff6000007ed85448 a0 : 0000000000000007 a1 : 00000000000000f7 [ 29.416008] a2 : 0000000000000000 a3 : 0000000000000000 a4 : ff6000007edd1780 [ 29.416188] a5 : 0000000000000001 a6 : ffffffff812eb1c0 a7 : ff600000016d8000 [ 29.416613] s2 : ffffffff81323c30 s3 : ffffffff812e9964 s4 : 0000000000000000 [ 29.416810] s5 : 0000000000000000 s6 : ff6000007ed85440 s7 : 0000000000000038 [ 29.416997] s8 : 0000000000000003 s9 : ffffffff81323c30 s10: ff6000007ed85448 [ 29.417159] s11: 0000000000000008 t3 : 00ffffffad08a000 t4 : ff60000001613e0c [ 29.417331] t5 : 0000000000000000 t6 : 00ffffffad177fff [ 29.417482] status: 0000000200000120 badaddr: 0000000000000000 cause: 8000000000000005 [ 29.417939] [<ffffffff8008d590>] on_each_cpu_cond_mask+0x20/0x32
Quoted 8 lines
[ 29.418179] [<ffffffff80008d32>] flush_icache_all+0x38/0x40 [ 29.418324] [<ffffffff80008eb2>] flush_icache_pte+0x4a/0x7a [ 29.418442] [<ffffffff80139e00>] do_set_pte+0x132/0x192 [ 29.418594] [<ffffffff8010b42e>] filemap_map_pages+0x178/0x3a0 [ 29.418738] [<ffffffff8013ad00>] __handle_mm_fault+0x992/0xbac [ 29.418876] [<ffffffff8013afde>] handle_mm_fault+0xc4/0x1d4 [ 29.419010] [<ffffffff80008372>] do_page_fault+0x120/0x326 [ 29.419145] [<ffffffff800033e6>] ret_from_exception+0x0/0xc
This has been addressed in the RISC-V IPI improvement series.
Regards,
Anup
Quoted 6 lines
--
Regards,
Atish